ZH
RU
ES

Infrared semi-quantitative analysis

Infrared semi-quantitative analysis, Total:460 items.

In the international standard classification, Infrared semi-quantitative analysis involves: Analytical chemistry, Semiconducting materials, Products of the textile industry, Milk and milk products, Ferroalloys, Protection against fire, Ferrous metals, Electricity. Magnetism. Electrical and magnetic measurements, Products of the chemical industry, Testing of metals, Non-ferrous metals, Geology. Meteorology. Hydrology, Insulating fluids, Lubricants, industrial oils and related products, Power stations in general, Water quality, Semiconductor devices, Raw materials for rubber and plastics, Optoelectronics. Laser equipment, Tobacco, tobacco products and related equipment, Metalliferous minerals, Farming and forestry, Paper and board, Soil quality. Pedology, Air quality, Coals, Construction materials, Medical sciences and health care facilities in general, Metrology and measurement in general, Non-metalliferous minerals, Cereals, pulses and derived products, Burners. Boilers, Powder metallurgy, Products of non-ferrous metals, Iron and steel products, Beverages, Rubber, Medical equipment, Fuels, Nuclear energy engineering, Meat, meat products and other animal produce, Optics and optical measurements, Spices and condiments. Food additives, Pulps, Non-destructive testing, Plastics, Protection of and in buildings.

American Society for Testing and Materials (ASTM), Infrared semi-quantitative analysis

ASTM E168-92 Standard Practice for General Techniques of Infrared Quantitative Analysis
ASTM E1655-04 Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E1655-05 Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E1655-17 Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E1655-05(2012) Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E168-67(1977) Standard Recommended Practices for General Techniques Of Infrared Quantitative Analysis
ASTM E168-16(2023) Standard Practices for General Techniques of Infrared Quantitative Analysis
ASTM E1655-00 Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E168-16 Standard Practices for General Techniques of Infrared Quantitative Analysis
ASTM E1790-00 Standard Practice for Near Infrared Qualitative Analysis
ASTM E1790-04 Standard Practice for Near Infrared Qualitative Analysis
ASTM E168-99 Standard Practices for General Techniques of Infrared Quantitative Analysis
ASTM E168-06 Standard Practices for General Techniques of Infrared Quantitative Analysis
ASTM E334-96 Standard Practice for General Techniques of Infrared Microanalysis
ASTM E334-01(2021) Standard Practice for General Techniques of Infrared Microanalysis
ASTM E1790-04(2016)e1 Standard Practice for Near Infrared Qualitative Analysis
ASTM E1790-04(2010) Standard Practice for Near Infrared Qualitative Analysis
ASTM E334-01(2013) Standard Practice for General Techniques of Infrared Microanalysis
ASTM E334-01 Standard Practice for General Techniques of Infrared Microanalysis
ASTM E334-01(2007) Standard Practice for General Techniques of Infrared Microanalysis
ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM F2381-10 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM D8274-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM D8274-19 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM D8274-20a Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM E169-04(2009) Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM E169-63(1977) Standard Recommended Practices for General Techniques Of Ultraviolet Quantitative Analysis
ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D7797-12 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy ndash; Rapid Screening Method
ASTM E169-04 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM E169-16(2022) Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM F1894-98 Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness
ASTM F1894-98(2003) Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness
ASTM F1894-98(2011) Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness
ASTM D7797-23 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D7797-16 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy&x2014;Rapid Screening Method
ASTM D7797-16a Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy&x2014;Rapid Screening Method
ASTM E1754-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM D6122-10 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-13 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-15 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
ASTM E169-63(1981)e1 Standard Recommended Practice for General Techniques of Ultraviolet Quantitative Analysis
ASTM E169-16 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM E169-99 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM E169-04(2014) Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM E1786-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM D7797-18 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D7797-17 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared semi-quantitative analysis

GB/T 32198-2015 General Rules for Quantitative Analysis Techniques of Infrared Spectroscopy
GB/T 32199-2015 Infrared Spectroscopy Qualitative Analysis Technique General Rules
GB/T 8705.1-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
GB/T 8705.3-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
GB/T 5687.8-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of sulfur content
GB/T 4701.8-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of carbon content
GB/T 5059.9-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of sulfur content
GB/T 4333.10-1990 Methods for chemical analysis of ferrosilicon--The infrared absorption method for the determination of carbon content
GB/T 7731.10-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of carbon content
GB/T 4701.10-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of sulfur content
GB/T 5059.7-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of carbon content
GB/T 5687.5-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of carbon content
GB/T 7731.12-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of sulfur content
GB/T 8654.8-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of carbon content
GB/T 8654.10-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of sulfur content
GB/T 4702.14-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of carbon content
GB/T 4702.16-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of sulfur content
GB 4702.14-1988 Metal Chromium Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
GB/T 4700.5-1998 Methods for chemical analysis of calcium-silicon The infrared absorption method for the determination of carbon content
GB/T 5686.5-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of carbon content
GB/T 5686.7-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of sulfur content
GB/T 4699.6-1988 Methods for chemical analysis of silicochromium--The infrared absorption method for the determination of sulfur content
GB/T 7603-1987 Determination of the aromatic carbon content in mineral insulating oils by infrared spectrum method
GB/T 4699.4-1988 Methods for chemical analysis of silicochromium The infrared absorption method for the determination of carbon content
GB/T 6150.4-2008 Methods for chemical analysis of tungsten concentrates.Determination of sulfur content .The high frequency-infrared absorption method
GB/T 8704.1-1997 Methods for chemical analysis of ferrovandium. The infrared absorption method and the gasometric method for the determination of carbon content
GB 8150.3-1987 Methods for chemical analysis of xanthates--The infrared drying method for determination of moisture and volatile matter content
GB/T 14849.6-2014 Methods for chemical analysis of silicon metal.Part 6:Determination of carbon.Infrared absorption method
GB/T 8647.9-1988 Nickel--Determination of sulphur content--Infra-red absorption method after high frequency induction furnace combustion
GB/T 8647.10-1988 Nickel--Determination of carbon content--Infra-red absorption method after high frequency induction furnace combustion
GB/T 4324.27-2012 Methods for chemical analysis of tungsten.Part 27:Determination of carbon content.High frequency combustion -infrared absorption method
GB/T 4325.21-2013 Methods for chemical analysis of molybdenum.Part 21:Determination of carbon content and sulfur content.High frequency combustion-infrared absorption method
GB/T 8704.3-1997 Methods for chemical analysis of ferrovanadium. The infrared absorption method and the combustion neutralization titration method for the determination of sulfur content
GB/T 7730.8-2000 Methods for chemical analysis of ferromanganese and blast furnace ferromanganese The infrared absorption method for the determination of sulfur content
GB/T 8647.8-2006 The methods for chemical analysis of nickel. Determination of sulphur content. Infra-red absorption method after high frequency induction furnace combustion
GB/T 8647.9-2006 The methods for chemical analysis of nickel. Determination of carbon content. Infra-red absorption method after high frequency induction furnace combustion
GB/T 7730.5-2000 Methods for chemical analysis of ferromanganese and blast furnace ferromanganese The infrared absorption method for the determination of carbon content
GB/T 26416.5-2010 Chemical analysis methods of dysprosium ferroalloy.Part 5: Determination of oxygen content.Impulse-infrared conductance absorption method
GB/T 20975.26-2013 Methods for chemical analysis of aluminium and aluminium alloys.Part 26:Determination of carbon content.Infrared absorption method
GB/T 20975.26-2013(英文版) Methods for chemical analysis of aluminium and aluminium alloys—Part 26：Determination of carbon content—Infrared absorption method
GB/T 4325.23-2013 Methods for chemical analysis of molybdenum.Part 23:Determination of oxygen and nitrogen contents.Inert gas fusion-infrared absorption and thermal conductivity method
GB/T 3260.9-2013 Methods for chemical analysis of tin.Part 9:Determination of sulphur content.Infra-red absorption method after high frequency induction furnace combustion
GB/T 26416.7-2023 Chemical Analysis Methods of Rare Earth Ferroalloys Part 7: Determination of Carbon and Sulfur Content by High Frequency-Infrared Absorption Method
GB/T 26416.5-2022 Chemical analysis method for rare earth ferroalloy—Part 5: Determination of oxygen content—Impulse-infrared absorption method
GB/T 4325.25-2013 Methods for chemical analysis of molybdenum.Part 25:Determination of hydrogen content.Inert gas fusion infrared absorption method/thermal conductivity method
GB/T 4700.7-1998 Methods for chemical analysis of calcium-silicon The infrared absorption method and the combustion-potassium iodate titration method for the determination of sulfur content
GB/T 4324.25-2012 Methods for chemical analysis of tungsten.Part 25:Determination of oxygen content.Pulse heating inert gas fusion -infrared absorption method
GB/T 1819.10-2004 Methods for chemical analysis of tin concentrates Determination of sulphur content-The high frequency infrared absorption method and the combustion potassium iodate titrimetric method
GB/T 24896-2010 Inspection of grain and oils-Determination of moisture content in paddy-Near-infrared method
GB/T 24898-2010 Inspection of grain and oils-Determination of moisture content in wheat-Near-infrared method
GB/T 24900-2010 Inspection of grain and oils-Determination of moisture content in maize-Near-infrared method
GB/T 12152-1989 Analysis of water used in boiler and cooling system--Determination of mineral oil--Infrared photometric method
GB/T 6150.4-2023 Methods of chemical analysis of tungsten concentrates-Part 4: Determination of sulfur content by high-frequency induction infrared absorption method and combustion-iodometric method
GB/T 9801-1988 Air quality--Determination of carbon monoxide--Non-disperisive infrared spectrometry
GB/T 24872-2010 Inspection of grain and oils-Determination of ash content in wheat flour-Near-infrared method
GB/T 4324.23-2012 Methods for chemical analysis of tungsten.Part 23:Determination of sulfur content.The combustion-conductometric titration and high frequency combustion-infrared absorption method
GB/T 11261-1989 Methods for chemical analysis of high carbon chromium bearing steel--The pulse heating inert gas fusion-infra-red absorption method for the determination of oxygen content
GB/T 4102.5-1983 Methods for chemical analysis of high-titanium slag and rutile--The direct combustion-iodimetric method for the determination of sulfur content
GB/T 4102.8-1983 Methods for chemical analysis of high-titanium slag and rutile--The EDTA volumetric method for the determination of aluminium oxide content
GB/T 4102.7-1983 Methods for chemical analysis of high-titanium slag and rutile--The gravimetric method for the determination of silicon dioxide content
GB/T 4102.6-1983 Methods for chemical analysis of high-titanium slag and rutile--The barium sulfate gravimetric method for the determination of sulfur content
GB/T 12690.1-2002 Chemical analysis methods for non-RE impurity of rare earth metals and their oxides-Determination of carbon and sulfur contents--High frequency-infrared absorption method
GB/T 12690.13-1990 Neodymium and samarium--Determination of carbon content--High frequency--Infrared absorption method
GB/T 4102.2-1983 Methods for chemical analysis of high-titanium slag and rutile--The potassium dichromate volumetric method for the determination of total iron content
GB/T 4102.4-1983 Methods for chemical analysis of high-titanium slag and rutile--The direct combustion-coulometric method for the determination of total carbon content
GB/T 23801-2009 Determination of fatty acid methyl esters(FAME) in middle distillates by infrared spectroscopy method
GB/T 24895-2010 Inspection of grain and oils-General regulations for model authentication of near-infrared analysis and administration and maintenance of network
GB/T 12690.1-2015 Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides.Part 1: Determination of carbon and sulfur contents.High frequency-infrared absorption method
GB/T 12690.1-2022 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 1：Determination of carbon and sulfur contents—High frequency-infrared absorption method
GB/T 4102.1-1983 Methods for chemical analysis of high-titanium slag and rutile--The ammonium ferric sulfate volumetric method for the determination of titanium dioxide content
GB/T 6150.17-1985 Methods for chemical analysis of tungsten concentrates--The semi-xylenol orange photometric method for the determination of bismuth content
GB/T 4102.3-1983 Methods for chemical analysis of high-titanium slag and rutile--The extraction-molybdenum blue photometric method for the determination of phosphorus content
GB/T 4102.12-1983 Methods for chemical analysis of high-titanium slag and rutile--The EDTA and CyDTA volumetric methods for the determination of calcium oxide and magnesium oxide content
GB/T 8570.6-2010 Determination of liquefied anhydrous ammonia.Part 6:Oil content.Gravimetric and infra-red methods
GB/T 223.48-1985 Methods for chemical analysis of iron,steel and alloy--The semixylenol orange photometric method for the determination of bismuth content
GB/T 3286.7-2014 Methods for chemical analysis of limestone and dolomite.Part 7:The determination of sulphur content. The pipe furnace combustion iodic acid potassium titration method,the high frequency combustion with infrared absorption method and the barium sulfate gra
GB/T 12690.4-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides Determination of oxygen and nitrogen content Impulse-infrared and impulse-thermal conductance absorption method
GB/T 34796-2017(英文版) Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry
GB/T 4102.9-1983 Methods for chemical analysis of high-titanium slag and rutile--The persulfate oxidation arsenite volumetric method for the determination of manganous monoxide content
GB/T 223.42-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalum content
GB 223.42-1985 Chemical analysis method of iron, steel and alloy Ion exchange separation of bromide o Glycinol red photometric method for determination of tantalum content
GB/T 7602.3-2008 Determination of T501 oxidation inhibitor content in transformer oil or turbine oil Part 3:Infrared spectroscopy method

Professional Standard - Electron, Infrared semi-quantitative analysis

SJ 20744-1999 General rule of infrared absorption spectral analysis for the impurity concentration in semiconductor materials
SJ/Z 9126-1987 Presentation for performances of air quality infra-red analyzers
SJ/T 2658.7-2015 Measuring method for semiconductor infrared-emitting diode.Part 7: Radiant flux
SJ/T 2658.1-2015 Measuring method for semiconductor infrared-emitting diode.Part 1: General
SJ/T 2658.4-2015 Measuring method for semiconductor infrared-emitting diode.Part 4: Total capacitance
SJ/T 2658.2-2015 Measuring method for semiconductor infrared-emitting diode.Part 2: Forward voltage
SJ/T 2658.5-2015 Measuring method for semiconductor infrared-emitting diode.Part 5:Series connection resistance
SJ/T 2658.6-2015 Measuring method for semiconductor infrared-emitting diode.Part 6: Radiant power
SJ/T 2658.8-2015 Measuring method for semiconductor infrared-emitting diode.Part 8: Radiant intensity
SJ/T 2658.10-2015 Measuring method for semiconductor infrared-emitting diode.Part 10: Modulation bandwidth
SJ/T 2658.11-2015 Measuring method for semiconductor infrared-emitting diode.Part 11: Response time
SJ/T 2658.9-2015 Measuring method for semiconductor infrared-emitting diode.Part 9: Spatial distribution of radiant intensity and half-intensity angle
SJ/T 2658.16-2016 Measuring method for semiconductor infrared-emitting diode.Part 16: Photo-electric conversion efficiency
SJ/T 2658.13-2015 Measuring method for semiconductor infrared-emitting diode.Part 13: Temperature coefficient for radiant power
SJ/T 2658.3-2015 Measuring method for semiconductor infrared-emitting diode.Part 3:Reverse voltage and reverse current
SJ/T 2658.12-2015 Measuring method for semiconductor infrared-emitting diode.Part 12: Peak-emission wavelength and spectral radiant bandwidth

Professional Standard - Textile, Infrared semi-quantitative analysis

FZ/T 01144-2018 Near Infrared Spectroscopy for Quantitative Analysis of Textile Fibers

CZ-CSN, Infrared semi-quantitative analysis

CSN 57 0536-1999 Determination of milk composition by mid-infrared analyzer

SE-SIS, Infrared semi-quantitative analysis

SIS SS 02 81 45-1991 Determination ofoilin water — Infrared spectrophotometric method
SIS SS IEC 528:1984 Electronic measuring equipment - Expression ofperformance of air quality infra-red analyzers

Standard Association of Australia （SAA）, Infrared semi-quantitative analysis

AS 3587.5:1998 Ferroalloys - Chemical analysis - Determination of sulfur content - Infrared method
AS 3587.4:1998 Ferroalloys - Chemical analysis - Determination of carbon content - Infrared method
AS/NZS 1050.32:1994 Methods for the analysis of iron and steel - Determination of carbon content - Infrared method
AS/NZS 1050.16:1994 Methods for the analysis of iron and steel - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
AS 1038.6.3.3:1997 Coal and coke - Analysis and testing - Higher rank coal - Ultimate analysis - Total sulfur - Infrared method
AS 2864.1:2003 Methods for the analysis of rutile - Determination of titanium content - Titrimetric method

RU-GOST R, Infrared semi-quantitative analysis

GOST R 57986-2017 Polymer composites. Infrared spectroscopy. Near infrared qualitative analysis
GOST R 57941-2017 Polymer composites. Infrared spectroscopy. Qualitative analysis
GOST R 8.593-2002 State system for ensuring the uniformity of measurements. Infrared analysers of grain and forage. Verification procedure
GOST 26318.12-1984 Non-metallic ore materials. Infra-red method for determination of moisture mass fraction
GOST R 51358-2008 Cigarettes. Determination of carbon monoxide content in the vapour phase of cigarette smoke using nondespersive infrared (NDIR) analyzer
GOST R 51358-1999 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke (NDIR method)
GOST 31630-2012 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke using nondespersive infrared (NDIR) analyzer
GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST R 8.657-2009 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
GOST 8.617-2013 State system for ensuring the traceability of measurements. Nondispersive infrared (NDIR) gas analyzers for determination of carbon monoxide in the vapour phase of cigarette smoke. The method of verification

国家市场监督管理总局、中国国家标准化管理委员会, Infrared semi-quantitative analysis

GB/T 37969-2019 Standard guidelines for near infrared qualitative analysis
GB/T 23801-2021 Determination of fatty acid methyl ester (FAME) content in middle distillates—Infrared spectrometry
GB/T 4333.7-2019 Ferrosilicon—Determination of sulfur content—Infrared absorption method and chromatographic separation-barium sulfate gravimetric method
GB/T 41366-2022 Livestock and poultry meat quality testing—Determination of moisture, protein and fat—Near-infrared spectroscopy method
GB/T 12690.4-2021 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 4: Determination of oxygen and nitrogen contents—Impulse-infrared absorption and impulse-thermal conductivity method

GOSTR, Infrared semi-quantitative analysis

GOST R 57987-2017 Polymer composites. Infrared spectroscopy. Multivariate quantitative analysis

IN-BIS, Infrared semi-quantitative analysis

IS 12705-1989

未注明发布机构, Infrared semi-quantitative analysis

BS 5849:1980(1999)*IEC 528:1975 Method of Expression of performance of air quality infra - red analysers [ IEC title : Expression of performance of air quality infra - red analyzers ]

Professional Standard - Ferrous Metallurgy, Infrared semi-quantitative analysis

YB/T 5339-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
YB/T 5341-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Sulfur Content
YB/T 191.7-2001 Methods for chemical analysis of chromium ores----The infrared absorption method for the determination of sulfur content
YB/T 109.6-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the determination of carbon content
YB/T 109.7-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the derermination of sulfur content
YB/T 5316-2006 Calcium silicon alloy chemical analysis method Infrared absorption method for determination of carbon content
YB/T 178.6-2000 Methods for chemical analysis silicon-aluminium alloy and silicon-barium-aluminium alloy.The infrared absorption method for the determination of carbon content
YB/T 5317-2006 Calcium silicon alloy chemical analysis method infrared absorption method and combustion potassium iodate titration method for determination of sulfur content
YB/T 190.7-2001 Methods for chemical analysis of continuous casting mold powder The gas-volumetric method after combustion and the infrared absorption method for the determination of carbon content
YB/T 190.6-2001 Methods for chemical analysis of continuous casting mold powder The gas-volumetric method after combustion and the infrared absorption method for the determination of dissociation carbon content
YB/T 4419.1-2014 Metallized pellet by rotary hearth furnace.Determination of carbon and sulfur content.Infrared absorption method after combustion in an induction furnace

Henan Provincial Standard of the People's Republic of China, Infrared semi-quantitative analysis

DB41/T 1050-2015 Ferrosilicon Chemical Analysis Method Infrared Absorption Method for Determination of Sulfur Content

RO-ASRO, Infrared semi-quantitative analysis

STAS 10803-1976 FILTER PAPER FOR SEMIQUANTATIVE AND QUANTATIVE ANALYSIS
STAS 8378/2-1969
STAS 8378/3-1969
STAS 8378/5-1969
STAS 8378/6-1969
STAS 8378/7-1969
STAS 8378/8-1969
STAS 8378/1-1969
STAS 8378/4-1969

International Electrotechnical Commission (IEC), Infrared semi-quantitative analysis

IEC 60528:1975 Expression of performance of air quality infra-red analyzers

British Standards Institution (BSI), Infrared semi-quantitative analysis

BS 5849:1980 Method of expression of performance of air quality infra-red analysers
DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
BS EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Infrared method after fusion under inert gas
BS ISO 248-2:2019 Tracked Changes. Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
18/30374728 DC BS EN 15948. Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
BS ISO 23468:2021 Reactor technology. Power reactor analyses and measurements. Determination of heavy water isotopic purity by Fourier transform infrared spectroscopy
BS 5202-16:1996 Methods for chemical analysis of tobacco and tobacco products - Determination of carbon monoxide in the vapour phase of cigarette smoke (NDIR method)
BS 6200-3.28.2:1990 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of sulphur. Steel and cast iron: infra-red absorption method after combustion in an induction furnace
BS EN 15058:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: non-dispersive infrared spectrometry
BS EN ISO 13199:2012 Stationary source emissions. Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes. Non-dispersive infrared analyser equipped with catalytic converter

Professional Standard - Forestry, Infrared semi-quantitative analysis

LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood

Professional Standard - Customs, Infrared semi-quantitative analysis

HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer

Ningxia Provincial Standard of the People's Republic of China, Infrared semi-quantitative analysis

DB64/T 1554-2018 Fiber Quantitative Analysis of Cotton and Polyester Fiber Blended Products by Near Infrared Method

Professional Standard - Non-ferrous Metal, Infrared semi-quantitative analysis

YS/T 514.3-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 3:Determination of sulfur content.High frequency infrared absorption method
YS/T 514.10-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 10:Determination of carbon content.High frequency infrared absorption method
YS/T 426.7-2000 Method for chemical analysis of antimony-beryllium pellets.Determination of carbon content.High frequency-infrared absorption method
YS/T 281.20-2011 Methods for chemical analysis of cobalt.Part 20：Determination of oxide content.Impulse infrared absorption
YS/T 271.3-1994 Chemical Analysis Method of Xanthate Determination of Moisture and Volatile Content by Infrared Drying Method
YS/T 281.14-1994 Cobalt - Determination of sulphur content - Infra-red absorption method after high frequency induction furnace combustion
YS/T 281.15-1994 Cobalt - Determination of carbon content - Infra-red absorption method after high frequency induction furnace combustion
YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry
YS/T 575.24-2009 Method for chemical analysis of aluminum ores.Part 24:Determination of carbon content and sulfur content.Infrared absorption method
YS/T 710.3-2009 Method for chemical analysis of cobalt oxide.Part 3:Determination of sulphur content.High frequency combustion-infrared absorption method
YS/T 1028.4-2015 Methods for chemical analysis of lithium iron phosphate.Part 4:Determination of carbon content.High frequency combustion with infrared absorption method
YS/T 861.4-2013 Methods for chemical analysis of niobium-titanium alloy.Part 4:Determination of carbon content.The high-frequency infrared absorption method
YS/T 281.13-2011 Methods for chemical analysis of cobalt.Part 13:Determination of sulphur content.Infra-red absorption method after high frequency induction furnace combustion
YS/T 281.14-2011 Methods for chemical analysis of cobalt.Part 14:Determination of carbon content.Infra-red absorption method after high frequency induction furnace combustion
YS/T 1075.7-2015 Methods for chemical analysis of vanadium-aluminium and molybdenum-aluminium master alloys.Part 7:Determination of oxygen content.Inert gas fusion-infrared method
YS/T 514.5-2006 Combustion-iodometric method for determination of sulfur content in high titanium slag and rutile chemical analysis method
YS/T 1047.4-2015 Methods for chemical analysis of copper magnetite.Part 4:Determination of sulfur content.High frequency combustion with infrared absorption method
YS/T 861.2-2013 Methods for chemical analysis of niobium-titanium alloy.Part 2:Determination of oxygen and nitrogen content.Inert gas fusion infrared/thermal conductivity method
YS/T 904.5-2013 Methods for chemical analysis of iron-chromium-aluminum fiber.Part 5:Determination of carbon and sulfur content.High-frequency infrared absorption method
YS/T 1605.12-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 12:Determination of carbon and sulfur contents — High frequency combustion infrared absorption method
YS/T 1075.6-2015 Methods for chemical analysis of vanadium-aluminium and molybdenum-aluminium master alloys.Part 6:Determination of carbon content.High frequency combustion infrared absorption method
YS/T 820.20-2012 Methods for chemical analysis of laterite nickel ores.Part 20:Determination of aluminum content.EDTA titration
YS/T 820.22-2012 Methods for chemical analysis of laterite nickel ores.Part 22:Determination of magnesium content.EDTA titration
YS/T 953.9-2014 Methods for chemical analysis of fire smelting nickel substrate material.Part 9:Determination of carbon and sulfur contents.Infrared absorption method after high frequency combustion
YS/T 514.6-2006 High titanium slag, rutile chemical analysis method barium sulfate gravimetric method for determination of sulfur content
YS/T 514.7-2006 High titanium slag, rutile chemical analysis method gravimetric determination of silicon dioxide content
YS/T 514.8-2006 High titanium slag, rutile chemical analysis method EDTA volumetric method for determination of alumina content
YS/T 820.24-2012 Methods for chemical analysis of laterite nickel ores.Part 24:Determination hygroscopic moisture content.Gravimetric method
YS/T 820.25-2012 Methods for chemical analysis of laterite nickel ores.Part 25:Determination of combined water content.Gravimetric method
YS/T 820.26-2012 Methods for chemical analysis of laterite nickel ores.Part 26:Determination of loss on ignition.Gravimetric method
YS/T 539.13-2009 Methods for chemical analysis of nickel base alloy powder.Part 13:Determination of oxygen content.The pulse heating inert gas fusion-infrared absorption method
YS/T 514.2-2006 High titanium slag, rutile chemical analysis method Potassium dichromate volumetric method for determination of total iron content
YS/T 514.4-2006 High titanium slag, rutile chemical analysis method Combustion-Coulometric method to determine carbon content
YS/T 1058-2015 Nickel, cobalt, manganese three-element composite oxide chemical analysis method Determination of sulfur content High-frequency induction furnace combustion infrared absorption method
YS/T 514.5-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 5:Determination of aluminium oxide content.EDTA titration
YS/T 820.3-2012 Methods for chemical analysis of laterite nickel ores.Part 3:Determinatin of total iron content.Potassium dichromate titration
YS/T 820.21-2013 Methods for chemical analysis of laterite nickel ores.Part 21:Determination of chromium content.The ammonium-ferrous sulfate titration method
YS/T 820.3-2013 Methods for chemical analysis of laterite nickel ore - Part 3: Determination of total iron content by potassium dichromate titration
YS/T 514.1-2006 High titanium slag, rutile chemical analysis method Determination of titanium dioxide content by ferric ammonium sulfate volumetric method
YS/T 820.4-2012 Methods for chemical analysis of laterite nickel ores.Part 4:Determination of phosphorus content.Phosphorus molybdenum blue spectrophotometry
YS/T 514.3-2006 Determination of Phosphorus Content by Extracting Molybdenum from High Titanium Slag and Rutile Chemical Analysis Method with Blue Photometry
YS/T 514.2-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 2:Determination of total iron content.Potassium dichromate titration
YS/T 820.8-2012 Methods for chemical analysis of laterite nickel ores.Part 8:Determination of silica content.Potassium silicafluoride titrimetric method
YS/T 820.11-2012 Methods for chemical analysis of laterite nickel ores.Part 11:Determination of fluorine and chlorine contents.Ion chromatography
YS/T 514.12-2006 High titanium slag, rutile chemical analysis method EGTA and CyDTA volumetric method to determine calcium oxide and magnesium oxide content
YS/T 820.2-2012 Methods for chemical analysis of laterite nickel ores.Part 2:Determination of nickel content.Dimetylglyoxime spectrophotometry
YS/T 820.18-2012 Methods for chemical analysis of laterite nickel ores.Part 18:Determination of mercury conten.Cold atomic absorption spectrometry
YS/T 514.8-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 8:Determination of phosphorus content.Antimony molybdenum blue spectrophotometry
YS/T 514.1-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 1:Determination of titanium dioxide content.Ferric ammonium sulfate titration
YS/T 820.15-2012 Methods for chemical analysis of laterite nickel ores.Part 15:Determination of cadmium content.Flame atomic absorption spectrometry
YS/T 820.1-2012 Methods for chemical analysis of laterite nickel ores.Part 1：Determination of nikel content.Flame atomic absorption spectrometry
YS/T 820.5-2012 Methods for chemical analysis of laterite nickel ores.Part 5:Determination of cobalt content.Flame atomic absorption spectrometry
YS/T 820.6-2012 Methods for chemical analysis of laterite nickel ores.Part 6:Determination of copper content.Flame atomic absorption spectrometry
YS/T 820.12-2012 Methods for chemical analysis of laterite nickel ores.Part 12:Determination of manganese content.Flame atomic absorption spectrometry
YS/T 820.13-2012 Methods for chemical analysis of laterite nickel ores.Part 13:Determination of lead content.Flame atomic absorption spectrometry
YS/T 820.14-2012 Methods for chemical analysis of laterite nickel ores.Part 14:Determination of zinc content.Flame atomic absorption spectrometry
YS/T 514.4-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 4:Determination of silicon dioxide content.Gravimetric analysis and molybdenum blue spectrophotometry
YS/T 514.9-2006 High titanium slag, rutile chemical analysis method persulfate-arsenite volumetric method for the determination of manganese monoxide
YS/T 820.7-2012 Methods for chemical analysis of laterite nickel ores.Part 7:Determination of calcium and magnesium content.Flame atomic absorption spectrometry
YS/T 820.9-2012 Methods for chemical analysis of laterite nickel ores.Part 9:Determination of scandium and cadmium content.Inductively coupled plasma mass spectrometry

NO-SN, Infrared semi-quantitative analysis

NS 9803-1993 Water analysis. Determination of oil in water. Infrared spectrophotometric method
NS 9804-1993 Water analysis. Determination of fat in wastewater from food processing industries. Infrared spectrophotometric method

工业和信息化部, Infrared semi-quantitative analysis

YS/T 1230.4-2018 Methods for chemical analysis of copper anodes Part 4: Determination of oxygen content by pulsed infrared method
YS/T 1550.4-2022 Methods for chemical analysis of beryllium alloys Part 4: Determination of carbon content by infrared absorption method
SJ/T 2658.15-2016 Measurement methods for semiconductor infrared emitting diodes Part 15: Thermal resistance
SJ/T 2658.14-2016 Measurement methods for semiconductor infrared emitting diodes Part 14: Junction temperature
YS/T 540.3-2018 Methods for chemical analysis of vanadium Part 3: Determination of carbon content High frequency combustion infrared absorption method
YS/T 540.7-2018 Methods for chemical analysis of vanadium Part 7: Determination of oxygen content Inert gas fusion infrared absorption method
YS/T 1550.5-2022 Methods for chemical analysis of beryllium alloys Part 5: Determination of oxygen content Inert gas fusion infrared absorption method
YS/T 1562.4-2022 Methods for chemical analysis of tungsten-copper alloys Part 4: Determination of carbon content High-frequency combustion infrared absorption method
YS/T 424.4-2022 Methods for chemical analysis of titanium diboride powder Part 4: Determination of carbon content High-frequency combustion infrared absorption method
XB/T 622.5-2017 Methods for chemical analysis of rare earth hydrogen storage alloys Part 5: Determination of carbon content High frequency combustion infrared absorption method
XB/T 622.6-2017 Methods for chemical analysis of rare earth hydrogen storage alloys Part 6: Determination of oxygen content Pulse heating infrared absorption method
YS/T 1563.5-2022 Methods for chemical analysis of molybdenum-rhenium alloys Part 5: Determination of carbon and sulfur content High-frequency combustion infrared absorption method
YS/T 1332.3-2019 Methods for chemical analysis of crude copper and cobalt raw materials Part 3: Determination of sulfur content High frequency combustion-infrared spectroscopy
YS/T 1585.4-2022 Methods for chemical analysis of silver-tungsten alloys Part 4: Determination of carbon content High-frequency induction furnace combustion infrared absorption method
YS/T 1057.5-2022 Methods for chemical analysis of cobalt tetroxide Part 5: Determination of carbon content High-frequency combustion-infrared absorption spectrometry
YS/T 1525-2022 Chemical analysis methods for nickel-platinum alloys, determination of oxygen and nitrogen content, pulse-infrared absorption method and thermal conductivity detection method
YS/T 1509.2-2021 Chemical analysis method of silicon-carbon composite anode materials Part 2: Determination of carbon content High-frequency heating infrared absorption method
YS/T 1489.7-2021 Methods for chemical analysis of cobalt-chromium-tungsten alloy powders Part 7: Determination of carbon content High-frequency combustion infrared absorption method
YS/T 1115.9-2016 Methods for chemical analysis of copper ores and tailings Part 9: Determination of sulfur content High-frequency infrared absorption method and combustion-potassium iodate titration method
YS/T 424.5-2022 Methods for chemical analysis of titanium diboride powder Part 5: Determination of oxygen content Pulse heating inert gas melting-infrared absorption method
YS/T 1563.7-2022 Methods for chemical analysis of molybdenum-rhenium alloys Part 7: Determination of hydrogen content Inert gas melting-infrared absorption method and thermal conductivity method
YS/T 1563.6-2022 Methods for chemical analysis of molybdenum-rhenium alloys Part 6: Determination of oxygen and nitrogen content Inert gas melting-infrared absorption method and thermal conductivity method
YS/T 1489.8-2021 Methods for chemical analysis of cobalt-chromium-tungsten alloy powders Part 8: Determination of oxygen content Pulse heating inert gas melting-infrared absorption method

German Institute for Standardization, Infrared semi-quantitative analysis

DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
DIN ISO 8454:2012 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method (ISO 8454:2007 + Amd.1:2009)
DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
DIN 50449-2:1998 Testing of materials for semiconductor technology - Determination of impurity content in semiconductors by infrared absorption - Part 2: Boron in gallium arsenide
DIN 50438-2:1982 Testing of materials for semiconductor technology; determination of impurty content in silicon by infrared absorption; carbon
DIN 50449-1:1997 Testing of materials for semiconductor technology - Determination of impurity content in semiconductors by infrared absorption - Part 1: Carbon in gallium arsenide
DIN EN 10276-2:2003-10 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas; German version EN 10276-2:2003
DIN ISO 8454:2021 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method (ISO 8454:2007 + Amd.1:2009 + Amd.2:2019)
DIN EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas; German version EN 10276-2:2003
DIN CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique; German version CEN/TS 16429:2013
DIN 10234:2003 Analysis of spices and condiments - Determination of capsaicinoid content of powdered paprika, paprika oleoresins, powdered chillies and chillie oleoresins - Method using high performance liquid chromatography (HPLC)
DIN EN 15058:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry English version of DIN EN 15058:2006-09
DIN EN ISO 15349-2:2003 Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999); German version EN ISO 15349-2:2003

Professional Standard - Electricity, Infrared semi-quantitative analysis

DL/T 919-2005 Determination of mineral oil content in sulphur hexafluoride by infrared spectrum method

Indonesia Standards, Infrared semi-quantitative analysis

SNI 06-2482-1991 Water, Test method for flouride content by spectrophotometer in a red alazaryn manuver
SNI 06-2505-1991 Water, Test methods for total organic carbon content by infrared KOT analyzers
SNI 7970.1-2014

AT-ON, Infrared semi-quantitative analysis

ONORM M 6608-1996 Water analysis - Determination of hydrocarbons by infrared spectrometry

IPC - Association Connecting Electronics Industries, Infrared semi-quantitative analysis

IPC TM-650 2.3.39A-1988 Surface Organic Contaminant Identification Test (Infrared Analytical Method)
IPC TM-650 2.3.39B-1997 Surface Organic Contaminant Identification Test (Infrared Analytical Method)
IPC TM-650 2.3.39C-2004 Surface Organic Contaminant Identification Test (Infrared Analytical Method)

Korean Agency for Technology and Standards (KATS), Infrared semi-quantitative analysis

KS M ISO 248-2:2014 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS H ISO 8454:2009 Cigarettes-Determination of carbon monoxide in the vapour phase of cigarette smoke-NDIR method
KS D ISO 7526-2012(2017) Nickel, ferronickel and nickel alloys－Determination of sulfur content－Infra-red absorption method after induction furnace combustion
KS D ISO 7524-2012(2017) Nickel, ferronickel and nickel alloys－Determination of carbon content－Infra-red absorption method after induction furnace combustion
KS M ISO 248-2-2014(2019) Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS E ISO 4689-3:2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
KS A ISO 9889:2012 Determination of carbon content in uranium dioxide powder and sintered pellets－Resistance furnace combustion－Titrimetric/coulometric/infrared absorbtion method
KS D ISO 15349-1-2005(2015) Unalloyed steel－Determination of low carbon content－Part 1：Infrared absorption method after combustion in an electric resistance furnace(by peak separation)
KS D ISO 15349-2:2003 Unalloyed steel－Determination of low carbon content－Part 2：Infrared absorption method after combustion in an induction furnace (with preheating)
KS D ISO 15349-3-2005(2015) Unalloyed steel－Determination of low carbon content－Part 3：Infrared absorption method after combustion in an electric resistance furnace(with preheating)
KS D ISO 15349-2-2003(2018) Unalloyed steel－Determination of low carbon content－Part 2：Infrared absorption method after combustion in an induction furnace (with preheating)

AENOR, Infrared semi-quantitative analysis

UNE-ISO 248-2:2013 Rubber, raw — Determination of volatilematter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
UNE-EN 10276-2:2004 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas
UNE-EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method

BE-NBN, Infrared semi-quantitative analysis

NBN T 91-502-1977 Water analysis methods - Determination of hydracarbons by infrared spectrophotometry
NBN T 91-501-1975 Water analysis methods - Determination of hydracarbons by infrared spectrophotometry

VN-TCVN, Infrared semi-quantitative analysis

TCVN 6678-2000 Cigarettes.Determination of carbon monooxide in the vapour phase of cigarettes smoke.NDIR method
TCVN 4654-3-2009 Iron ores.Determination of sulphur content.Part 3: Combustion/infrared method
TCVN 7725-2007 Ambient air.Determination of carbon monoxide.Non-dispersive infrared spectrometric method
TCVN 2617-2008 Liquefied anhydrous ammonia for industrial use.Determination of oil content.Gravimetric and infrared spectrometric methods

International Organization for Standardization (ISO), Infrared semi-quantitative analysis

ISO 8454:2007 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method
ISO 248-2:2012 Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 8454:1987 Cigarettes; Determination of carbon monoxide in the vapour phase of smoke (NDIR method)
ISO 8454:1995 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method
ISO 248-2:2019 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 4689-3:2004 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
ISO 4689-3:2017 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
ISO 4689-3:2015 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
ISO 23468:2021 Reactor technology - Power reactor analyses and measurements - Determination of heavy water isotopic purity by Fourier transform infrared spectroscopy
ISO 9889:1994 Determination of carbon content in uranium dioxide powder and sintered pellets - Resistance furnace combustion - Titrimetric/coulometric/infrared absorption method
ISO/DIS 15360-3:1980 Recycled pulps — Estimation of stickies and plastics — Part 3: Determination by applying near-infrared measurement

Group Standards of the People's Republic of China, Infrared semi-quantitative analysis

T/HXCY 002-2021 Determination of Sugar Content of Saccharum Spontaneum -Near Infrared Spectrum（NIRS）
T/CSTM 00660.1-2023 Methods for chemical analysis of titanium carbide slag— Part 1:Determination of free carbon content—High frequency combustion with infrared absorption method
T/HBFIA 0020-2021 Rapid determination of indicators of Laobaigan-flavored fermented grains by near-infrared spectroscopic analysis
T/CWAN 0029.2-2021 Chemical analysis methods of nickel-based welding materials Part 2: Determination of carbon and sulfur content by infrared absorption method of high-frequency induction furnace combustion
T/QAS 081.1-2023 Chemical Analysis of Polymetallic Minerals Part 1: Determination of Carbon and Sulfur by High Frequency Combustion Infrared Absorption Method
T/CTES 1039-2021 Textiles-Test method for assessing the smoothness appearance of fabrics after laundering and drying-Infrared image analysis method

Professional Standard - Light Industry, Infrared semi-quantitative analysis

QB/T 2812-2006 Paper-online determination of weight and moisture (The near infrared method)

Professional Standard - Aviation, Infrared semi-quantitative analysis

HB 5297.24-2001 Determination of Oxygen and Nitrogen Content by Pulse Heating Infrared Thermal Conductivity Method for Chemical Analysis of Titanium Alloy
HB 5297.22-2001 Titanium Alloy Chemical Analysis Method High Frequency Induction Heating-Infrared Absorption Method Determination of Carbon Content
HB 5220.3-1995 High-frequency Induction Heating-Infrared Absorption Method for Chemical Analysis of Superalloys Determination of Carbon Content
HB 5220.6-1995 High-frequency induction heating-infrared absorption method for chemical analysis of superalloys Determination of sulfur content
HB 5220.49-2008 Methods for chemical analysis of superalloys. Part 49: Determination of oxygen, nitrogen content by impulse heating-infrared, thermal conductivity method
HB 5220.3-2008 Methods for chemical analysis of super alloys. Part 3: Determination of carbon content by high frequency induction combustion-infrared absorption method
HB 5220.6-2008 Methods for chemical analysis of superalloys.Part 6:Determination of sulfur content by high frequency induction combustion-infrared absorption method
HB 5218.22-1995 Aluminum Alloy Chemical Analysis Method Magenta Photometry Determination of Boron Content
HB/Z 5218.22-2004 Methods for chemical analysis of aluminium alloys-Part 22:Determination of boron content by carmine spectrophotometric method
HB 5220.46-1995 Determination of bismuth content by semi-xylenol orange absorptiophotometry method for chemical analysis of superalloys
HB 5220.46-2008 Methods for chemical analysis of superalloys. Part 46: Determination of bismuth content by semixylenol orange photometric method

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Infrared semi-quantitative analysis

IPC TM-650 2.3.39-2004 Surface Organic Contaminant Identification Test (Infrared Analytical Method) Revision C

Japanese Industrial Standards Committee (JISC), Infrared semi-quantitative analysis

JIS K 6238-2:2009 Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric method using automatic analyzer with infrared drying
JIS G 1239:2014 Iron and steel -- Determination of oxygen -- Infrared absorption method after fusion under inert gas
JIS G 1211-3:2011 Iron and steel -- Determination of carbon content -- Part 3: Infrared absorption method after combustion
JIS G 1211-3 AMD 1:2013 Iron and steel.Determination of carbon content.Part 3: Infrared absorption method after combustion (Amendment 1)
JIS G 1211-3 AMD 2:2017 Iron and steel -- Determination of carbon content -- Part 3: Infrared absorption method after combustion (Amendment 2)
JIS G 1215-4:2010 Iron and steel -- Determination of sulfur content -- Part 4: Infrared absorption method after combustion in an induction furnace
JIS G 1215-4 AMD 2:2017 Iron and steel -- Determination of sulfur content -- Part 4: Infrared absorption method after combustion in an induction furnace (Amendment 2)
JIS G 1215-4 AMD 1:2015 Iron and steel -- Determination of sulfur content -- Part 4: Infrared absorption method after combustion in an induction furnace (Amendment 1)

Professional Standard - Rare Earth, Infrared semi-quantitative analysis

XB/T 614.3-2011 Chemical analysis method of gadolinium-magnesium alloy.Part 3:Determination of carbon content.High frequency-infrared absorption method
XB/T 617.6-2014 Chemical analysis methods of neodymium iron boron alloy.Part 6:Determination of carbon content.High frequency-infrared absorption method
XB/T 601.9-1993 Lanthanum hexaboride chemical analysis method Determination of carbon content by high frequency induction combustion infrared absorption method
XB/T 610.3-2015 Chemical analysis methods for samarium-cobalt permanent magnet alloy.Part 3: Determination of oxygen content.Impulse-infrared absorption method
XB/T 601.4-2008 Chemical analysis methods of lanthanum boride.Determination of carbon content.High frequency induced combustion infrared ray absorbs method
XB/T 610.3-2007 Chemical analysis methods for samarium cobalt permanent magnet alloy powder- Determination of oxygen content- Impulse-infrared absorption method
XB/T 617.7-2014 Chemical analysis methods for neodymium iron boron alloy.Part 7:Determination of oxygen and nitrogen contents.Impulse-infrared and impulse-thermal conductance absorption method

YU-JUS, Infrared semi-quantitative analysis

JUS H.F8.232-1986 Gases. Determination of hydrocarbons content. Infrared spectrophotometric method
JUS F.S2.501-1982 Textile. Ouantitative and qualitative analysis of jute and kenaf
JUS H.F8.153-1986 Gases. Determination of carbon dioxid content. Infrared spectrophotometric method

European Committee for Standardization (CEN), Infrared semi-quantitative analysis

PD CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique
EN 15948:2015 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
EN 15058:2006 Stationary source emissions Determination of the mass concentration of carbon monoxide (CO) Reference method: Non-dispersive infrared spectrometry
EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas

Danish Standards Foundation, Infrared semi-quantitative analysis

DS/CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique
DS/EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas
DS/EN 14078:2010 Liquid petroleum products - Determination of fatty methyl ester (FAME) content in middle distillates - Infrared spectrometry method
DS/ISO 9869-2:2021 Thermal insulation – Building elements – In-situ measurement of thermal resistance and thermal transmittance – Part 2: Infrared method for frame structure dwelling – Amendment 1: Example of calculation of uncertainty analysis

National Metrological Verification Regulations of the People's Republic of China, Infrared semi-quantitative analysis

JJG 635-2011 Verification Regulation of Carbon Monoxide and Carbon Dioxide Infrared Gas Analyzer
JJG 635-1999 Verification Regulation of Monooxide and Carbon Diaxide Infrared Gas Analyzer

Association Francaise de Normalisation, Infrared semi-quantitative analysis

NF X20-361:1976 Gas analysis. Determination of carbon monoxide by absorption of a non dispersive infra-red radiation beam.
NF V37-032:1996 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke. Ndir method.
NF A06-726:1992 Analyse chimique du cuivre - Dosage du soufre - Méthode par absorption dans l'infrarouge après combustion dans un four à induction.
NF A06-392-2*NF EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2 : infrared method after fusion under inert gas.
NF V37-032/A1*NF ISO 8454/A1:2013 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method - Amendment 1
NF EN 15948:2020 Céréales - Détermination de la teneur en eau et en protéines - Méthode utilisant la spectroscopie dans le proche infrarouge sur des grains entiers
NF EN 14078:2015 Produits pétroliers liquides - Détermination de la teneur en esters méthyliques d'acides gras (EMAG) des distillats moyens - Méthode par spectrométrie infrarouge
NF T77-155:1987 Basic silicones for industrial use. Determination of vinyl groups (content more than 0,1 per cent (m/m)). Near infra-red spectrometric method.

Jiangxi Provincial Standard of the People's Republic of China, Infrared semi-quantitative analysis

DB36/T 815-2014 Determination of Hydrogen Content by Pulse Heating-Infrared Absorption Method for Chemical Analysis of SmCo Permanent Magnetic Alloy Powder

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Infrared semi-quantitative analysis

GB/T 13747.24-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 24：Determination of carbon content—Infrared absorption method after high frequency combustion
GB/T 10574.12-2017 Methods for chemical analysis of tin-lead solders—Part 12：Determination of sulfur content—High frequency combustion with infrared absorption method
GB/T 13747.22-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 22：Determination of oxygen and nitrogen contents—Inert gas fusion-infrared absorption and thermal conductivity method
GB/T 13747.21-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 21：Determination of hydrogen content—Inert gas fusion-infrared absorption or thermal conductivity method
GB/T 24131.2-2017 Rubber,raw—Determination of volatile-matter content—Part 2:Thermogravimetric methods using an automatic analyser with an infrared drying unit
GB/T 1819.10-2017 Methods for chemical analysis of tin concentrates—Part 10: Determination of sulfur content—High frequency combustion with infrared absorption method and potassium iodate titrimetric method

Professional Standard - Geology, Infrared semi-quantitative analysis

DZ/T 0279.25-2016 Methods of Analysis of Regional Geochemical Samples Part 25: Combustion for Carbon Determination - Infrared Absorption Spectroscopy

海关总署, Infrared semi-quantitative analysis

SN/T 3896.8-2020 Quantitative Analysis of Textile Fibers for Import and Export by Near Infrared Method Part 8: Mixtures of Cotton and Polyamide
SN/T 3896.7-2020 Quantitative Analysis of Textile Fibers for Import and Export by Near Infrared Method Part 7: Mixtures of Polyester Fibers and Polyamide Fibers

Professional Standard - Commodity Inspection, Infrared semi-quantitative analysis

SN/T 3896.1-2014 Quantitative analysis of fiber in textiles for import and export.Near-infrared spectroscopy method.Part 1:Mixture of polyester fiber and cotton fiber
SN/T 2763.8-2014 Chemical analysis of nickel laterite ore.Part 8:Determination of magnesium oxide content
SN/T 2763.9-2015 Chemical analysis of nickel laterite ores.Part 9:Determination of moisture content of a consignment
SN/T 3896.2-2015 Quantitative analysis of fiber in textiles for import and export.Near-infrared spectroscopy method.Part 2:Mixture of polyester fiber and lycra fiber
SN/T 3323.2-2012 Mill scale.Part 2:Determination of sulfur content.High frequency combustion infrared absorption method
SN/T 2763.3-2012 Chemical analysis of nickel laterite ore.Part 3:Determination of total iron content.Titanium(Ⅲ) chloride reduction methods
SN/T 3321.2-2013 Limestone and dolomite.Part 2:Determination of carbon and sulfur content.High frequency combustion with infrared absorption method
SN/T 0481.8-2010 Methods for inspection of bauxite for export.Part 8:Determination of sulfur content.High frequency combustion-infrared absorption method
SN/T 2763.2-2012 Chemical analysis of laterite nickel ore.Part 2:Determination of nickel and cobalt content.Flame atomic absorption spectrometry
SN/T 2763.5-2013 Chemical analysis of nickel laterite ore.Part 5:Determination of copper,zinc and chrome content.Flame atomic absorption spectrometry

中华人民共和国环境保护部, Infrared semi-quantitative analysis

GB 9801-1988 Air quality--Determination of carbon monoxide--Non- disperisive infrared spectrometry

国家质量监督检验检疫总局, Infrared semi-quantitative analysis

SN/T 3896.6-2017 Quantitative Analysis of Textile Fibers for Import and Export by Near Infrared Method Part 6: Mixtures of Polyester Fiber and Wool
SN/T 3896.5-2015 Quantitative Analysis of Imported and Exported Textile Fibers by Near Infrared Method Part 5: Mixtures of Polyester Fibers and Viscose Fibers
SN/T 3896.4-2015 Quantitative Analysis of Imported and Exported Textile Fibers by Near Infrared Method Part 4: Mixtures of Cotton and Polyurethane Elastic Fibers
SN/T 3896.3-2015 Quantitative Analysis of Imported and Exported Textile Fibers by Near Infrared Method Part 3: Mixtures of Polyamide Fibers and Polyurethane Elastic Fibers

KR-KS, Infrared semi-quantitative analysis

KS E ISO 4689-3-2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
KS E ISO 4689-3-2017 Iron ores－Determination of sulfur content－Part 3：Combustion/infrared method

Lithuanian Standards Office , Infrared semi-quantitative analysis

LST EN 10276-2-2004 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas
LST EN 14078-2010 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method

PL-PKN, Infrared semi-quantitative analysis

PN C04194-1992 Petroleum products Determination of the benzene content in gasoline by infrared spectrophotometric method

国家文物局, Infrared semi-quantitative analysis

WW/T 0087-2018 Determination of aging degree of silk fabrics in collections using Fourier transform infrared spectroscopic analysis

US-ACEI, Infrared semi-quantitative analysis

IPC TM-650 2.3.39-1997 Surface Organic Contaminant Identification Test (Infrared Analytical Method) Revision B(Test Methods Manual)

Taiwan Provincial Standard of the People's Republic of China, Infrared semi-quantitative analysis

CNS 15057-2007 Liquid petroleum products - Determination of fatty acid methyl esters (FAME) in middle distillates - Infrared spectroscopy method

TH-TISI, Infrared semi-quantitative analysis

TIS 1969-2000 Liquidfied anhydrous amnonia for industrial use.determination of oil content.gravimetric and infra-red spectrometric methods

U.S. Air Force, Infrared semi-quantitative analysis

AIR FORCE MIL-STD-1564 A CHG NOTICE 2-1997 PROCEDURE FOR CALIBRATION AND ANALYSIS OF TRACE CONTAMINANTS IN AVIATOR'S BREATHING OXYGEN BY INFRARED SPECTROSCOPY

Society of Automotive Engineers (SAE), Infrared semi-quantitative analysis

SAE AIR5917-2020 Procedure for Measurement of Gaseous Emissions from Aircraft Gas Turbine Engines Using Fourier Transform Infrared Analysis

Qinghai Provincial Standard of the People's Republic of China, Infrared semi-quantitative analysis

DB63/T 1612-2017 Chemical analysis method for fixed carbon in carbonate-containing graphite ore Nitric acid treatment High-frequency infrared carbon-sulfur analyzer method

中华全国供销合作总社, Infrared semi-quantitative analysis

GH/T 1259-2019 Near-infrared spectroscopic determination of moisture, tea polyphenols and caffeine content in tea polyphenol products
GH/T 1260-2019 Near-infrared spectroscopic determination of moisture, tea polyphenols and caffeine content in solid instant tea

Professional Standard - Nuclear Industry, Infrared semi-quantitative analysis

EJ/T 1212.10-2008 Test methods for analysis of sintered gadolinium oxide-uranium dioxide pellets.Part10: Determination of carbon by high-frequency inductive combustion-infrared detection method

FI-SFS, Infrared semi-quantitative analysis

SFS 5412-1987

IT-UNI, Infrared semi-quantitative analysis

UNI 5612-1965

国家能源局, Infrared semi-quantitative analysis

SY/T 7657.3-2021 Part 3 of the combined photoacoustic spectroscopy-infrared spectroscopy-fuel cell determination method for natural gas: Determination of the content of ethane and above alkanes, carbon dioxide and carbon monoxide by infrared spectroscopy