ZH
RU
ES
annealing temperature
annealing temperature, Total:388 items.
In the international standard classification, annealing temperature involves: Glass, Rubber, Non-metalliferous minerals, Materials for aerospace construction, Products of non-ferrous metals, Electrical wires and cables, Water quality, Aerospace fluid systems and components, Test conditions and procedures in general, Refractories, Fluid storage devices, Measurement of time, velocity, acceleration, angular velocity, Farming and forestry, Thermodynamics and temperature measurements, Protection against fire, Packaging and distribution of goods in general, Plastics, Construction materials, Powder metallurgy, Welding, brazing and soldering, Pipeline components and pipelines, Electrical engineering in general, Coals, Aerospace electric equipment and systems, Electricity. Magnetism. Electrical and magnetic measurements, Metrology and measurement in general, Products of the chemical industry, Medical sciences and health care facilities in general, Fuels, Burners. Boilers, Explosion protection, Analytical chemistry, Nuclear energy engineering, Insulating materials, Electrical equipment for working in special conditions, Products of the textile industry.
Association Francaise de Normalisation, annealing temperature
- NF B30-105:1972 Determination of annealing point and strain point of glass.
- NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
- NF EN ISO 2578:1998 Plastiques - Détermination des limites temps-températures après exposition à l'action prolongée de la chaleur
- NF T51-000:1978 Plastics. Preferred scales of temperatures and test durations.
- NF B40-320*NF ISO 22685:2022 Refractory products - Determination of compressive strength at elevated temperature
- NF ISO 22685:2022 Produits réfractaires - Détermination de la résistance à la compression à température élevée
- NF E18-100:2013 Time-temperature indicators and integrators - Tests and performance
- NF B40-315*NF EN ISO 1893:2009 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
- NF L54-143-014:2011 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 oC to 175 oC continuous, 200 oC continuous, 260 oC peak - Part 014 : square flange receptacle with integrated
- NF S66-260:2005 Determination of the auto ignition temperature of gases and vapours.
ES-AENOR, annealing temperature
SAE - SAE International, annealing temperature
- SAE AMS4555A-1947 BRASS TUBING Light Annealed
- SAE AMS4555-1941 BRASS TUBING Light Annealed
- SAE AMS4555E-1983 BRASS TUBING@ SEAMLESS 68Cu - 31Zn Light Annealed (UNS C33000)
- SAE AMS4321-1987 ALUMINUM ALLOY FORGINGS 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed (UNS A97049)
- SAE AMS4321B-2016 Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed (UNS A97049)
- SAE AMS4555F-1989 BRASS TUBING@ SEAMLESS 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (050) (UNS C33000)
- SAE AMS4942A-1976 TITANIUM TUBING@ SEAMLESS Annealed@ 40@000 psi (276 MPa) Yield Strength
- SAE AMS4941B-1977 TITANIUM TUBING@ WELDED Annealed@ 40@000 psi (276 MPa) Yield Strength
- SAE AMS4942B-1977 TITANIUM TUBING@ SEAMLESS Annealed@ 40@000 psi (276 MPa) Yield Strength
- SAE AMS4941A-1974 TITANIUM TUBING@ WELDED Annealed@ 40@000 psi (276 MPa) Yield Strength
- SAE AMS4942C-1984 Titanium Tubing@ Seamless Annealed@ 40@000 psi (275 MPa) Yield Strength
- SAE AMS4941C-1984 Titanium Tubing@ Welded Annealed@ 40@000 psi (276 MPa) Yield Strength
- SAE AMS4555D-1977 BRASS TUBING@ SEAMLESS 68Cu - 31Zn Light Annealed (UNS C26000; UNS C33000)
- SAE AMS4942G-2018 Titanium Tubing@ Seamless Annealed@ 40.0 ksi (275 MPa) Yield Strength (UNS R50400)
- SAE AMS5548L-1998 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.1N High Temperature Anneal
- SAE AMS4555G-1994 Leaded Brass@ Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (050) (UNS C33000)
- SAE AMS4901F-1977 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (483 Mpa) Yield Strength
- SAE AMS4900E-1977 TITANIUM SHEET@ STRIP@ AND PLATE Annealed 55@000 psi (379 Mpa) Yield Strength
- SAE AMS4901E-1972 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (483 Mpa) Yield Strength
- SAE AMS4921D-1977 TITANIUM BARS@ FORGINGS@ AND RINGS Annealed@ 70@000 psi (483 MPa) Yield Strength
- SAE AMS6519A-1987 Steel Bars@ Forgings@ Tubing@ and Rings@ Maraging 19Ni - 3.0Mo - 1.4Ti - 0.10Al Double Vacuum Melted@ Annealed
- SAE AMS4966F-1977 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi (758 MPa) Yield Strength
- SAE AMS4966D-1972 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi (758 MPa) Yield Strength
- SAE AMS4921C-1976 Titanium Bars@ Wire@ Forgings@ and Rings Annealed@ 70@000 psi (483 MPa) Yield Strength
- SAE AMS4901K-1986 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (485 Mpa) Yield Strength (UNS R50700)
- SAE AMS4900G-1984 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 55@000 psi (380 Mpa) Yield Strength (UNS R50550)
- SAE AMS4902D-1986 TITANIUM SHEET@ STRIP@ AND PLATE Annealed 40@000 psi (275 MPa) Yield Strength (UNS R50400)
- SAE AMS4901J-1984 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (485 Mpa) Yield Strength (UNS R50700)
- SAE AMS4901H-1978 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (483 Mpa) Yield Strength (UNS R50700)
- SAE AMS4900H-1986 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 55@000 psi (380 Mpa) Yield Strength (UNS R50550)
- SAE AMS4901L-1986 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (485 Mpa) Yield Strength (UNS R50700)
- SAE AMS4921F-1985 Titanium Bars@ Wire@ Forgings@ and Rings Annealed@ 70@000 psi (483 MPa) Yield Strength
- SAE AMS4901G-1977 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (483 Mpa) Yield Strength (UNS R50700)
- SAE AMS4921E-1979 Titanium Bars@ Forgings@ and Rings Annealed@ 70@000 psi (483 MPa) Yield Strength (UNS R50700)
- SAE AMS4900J-1986 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 55@000 psi (380 Mpa) Yield Strength (UNS R50550)
- SAE AMS4900F-1977 TITANIUM SHEET@ STRIP@ AND PLATE Annealed 55@000 psi (379 Mpa) Yield Strength (UNS R50550)
- SAE AMS4902C-1980 TITANIUM SHEET@ STRIP@ AND PLATE Annealed 40@000 psi (276 MPa) Yield Strength (UNS R50400)
- SAE AMS4926E-1976 TITANIUM ALLOY BARS AND RINGS 5Al - 2.5Sn Annealed@ 110@000 psi (758 MPa) Yield Strength
- SAE AMS4966R-2017 Titanium Alloy@ Forgings 5Al - 2.5Sn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R54520)
- SAE AMS4966L-1998 Titanium Alloy@ Forgings 5AI - 2.5Sn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R54520)
- SAE AMS4966K-1994 Titanium Alloy@ Forgings 5Al - 2.5Sn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R54520)
- SAE AMS4926F-1977 Titanium Alloy Bars and Rings 5A1 - 2.5Sn Annealed@ 110@000 psa (758 MPa) Yield Strength
- SAE AMS4902E-1986 TITANIUM SHEET@ STRIP AND PLATE Annealed 40@000 psi (275 MPa) Yield Strength (UNS R50400)
- SAE AMS4966J-1988 Titanium Alloy@ Forgings 5Al - 2.5Sn Annealed@ 110@000 psi (758 MPa) Yield Strength (UNS R54520)
- SAE AMS4966H-1983 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi (760 MPa) Yield Strength (UNS R54520)
- SAE AMS4966G-1979 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi (758 MPa) Yield Strength (UNS R54520)
- SAE AMS4900K-1991 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed@ 55.0 ksi (379 MPa) Yield Strength
- SAE AMS4044N-2017 "Aluminum Alloy@ Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-O) or when specified@ ""As Fabricated"" (7075-F) (UNS A97075)"
- SAE AMS6511B-2018 Steel@ Maraging@ Bars@ Forgings@ Tubing@ and Rings 18Ni - 8.5Co - 3.2Mo - 0.20Ti - 0.10Al Double Vacuum Melted@ Annealed (UNS K92710)
- SAE AMS6515B-2018 Steel@ Maraging@ Bars@ Forgings@ Tubing@ and Rings 18.5Ni - 12.0Co - 4.9Mo - 1.40Ti - 0.10Al Double Vacuum Melted@ Annealed (UNS K93540)
- SAE AMS4908F-1994 Titanium Alloy@ Sheet and Strip 8Mn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R56080)
- SAE AMS4926G-1983 Titanium Alloy Bars and Rings 5A1 - 2.5Sn Annealed@ 110@000 psi (760 MPa) Yield Strength (UNS R54520)
- SAE AMS4926H-1988 Titanium Alloy Bars and Rings 5Al - 2.5Sn Annealed@ 110@000 psi (760 MPa) Yield Strength (UNS R54520)
- SAE AMS5315E-2017 Ductile (Nodular) Iron Castings@ Sand 60000 psi (415 MPa) Tensile Strength Ferritize Annealed (UNS F33101)
- SAE AMS4908G-2003 Titanium Alloy@ Sheet and Strip 8Mn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R56080)
- SAE AMS5916B-2017 Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ and Plate 35Fe - 24Cr - 37Ni - 0.65Cb(Nb) - 0.2N Annealed (UNS N08120)
- SAE AMS4985C-2003 Titanium Alloy@ Investment Castings 6Al - 4V 130 UTS@ 120 YS@ 6% EL Hot Isostatically Pressed Anneal Optional or When Specified (UNS R56401)
- SAE AMS4985D-2010 Titanium Alloy@ Investment Castings 6Al - 4V 130 UTS@ 120 YS@ 6% EL Hot Isostatically Pressed Anneal Optional or When Specified (UNS R56401)
- SAE AMS4908E-1988 TITANIUM ALLOY SHEET AND STRIP 8Mn Annealed@ 110@000 psi (760 Mpa) Yield Strength (UNS R56080)
- SAE AMS4908D-1981 TITANIUM ALLOY SHEET AND STRIP 8Mn Annealed@ 110@000 psi (760 Mpa) Yield Strength (UNS R56080)
- SAE AMS4902F-1991 Titanium Sheet@ Strip@ and Plate Commercially- Pure Annealed 40.0 ksi (276 MPa) Yield Strength (UNS R50400)
- SAE AMS5315D-1992 Ductile (Nodular) Iron Castings@ Sand 60@000 psi (415 MPa) Tensile Strength Ferritize Annealed (UNS F33101)
- SAE AMS6514C-1992 Steel@ Maraging@ Bars@ Forgings@ Tubing@ and Rings 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted@ Annealed
- SAE AMS4902L-2018 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed 40.0 ksi (276 MPa) Yield Strength (UNS R50400)
- SAE AMS4940C-2017 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed@ 25.0 ksi (172 MPa) Yield Strength (UNS R50250)
- SAE AMS4900N-2010 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed@ 55 ksi (379 MPa) Yield Strength (UNS R50550)
- SAE AMS4900R-2019 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed@ 55 ksi (379 MPa) Yield Strength (UNS R50550)
- SAE AMS4926J-1994 Titanium Alloy@ Bars@ Wire@ and Rings 5Al - 2.5Sn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R54520)
- SAE AMS4926N-2015 Titanium Alloy@ Bars@ Wire@ and Rings 5Al - 2.5Sn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R54520)
- SAE AMS4928J-1984 Titanium Alloy Bars@ Forgings@ and Rings 6Al - 4V Annealed@ 120@000 psi (825 MPa) Yield Strength (UNS R56400)
Korean Agency for Technology and Standards (KATS), annealing temperature
- KS M ISO 2921-2014(2019) Rubber, vulcanized — Determination of low-temperature retraction (TR test)
- KS M ISO 2578:2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
- KS M ISO 471:2011 Rubber－Temperature, humidities and times for conditioning and testing
- KS M ISO 471-2002(2007) Rubber－Temperature, humidities and times for conditioning and testing
- KS M ISO 2578-2007(2017) Plastics－Determination of time－temperature limits after prolonged exposure to heat
- KS M ISO 871:2019 Plastics — Determination of ignition temperature using a hot-air furnace
- KS M ISO 10146:2004 Crosslinked polyethylene(PE-X) pipes－Effect of time and temperature of the expected strength
- KS M ISO 10146:2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
- KS L ISO 7884-7:2014 Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending
- KS L ISO 7884-7-2014(2019) Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending
- KS C IEC 61224:2012 Nuclear reactors－Response time in resistance temperature detectors(RTD)－In situ measurements
- KS M ISO 3384:2007 Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures
- KS M ISO 3384:2014 Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures
YU-JUS, annealing temperature
- JUS U.J1.070-1986 Fire protection. Standard time-temperature curve in fire resistance test furnaces for constructions
- JUS G.S2.640-1991 Plastics and abonite.Determination of temperature of deflection under load
工业和信息化部, annealing temperature
- YB/T 4718-2019 High temperature annealing isolating agent for oriented electrical steel
Society of Automotive Engineers (SAE), annealing temperature
- SAE AMS4321A-1993 Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed
- SAE AMS4321-1992 ALUMINUM ALLOY FORGINGS 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed
- SAE AMS4321A-2010 Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed
- SAE AMS4942D-2001 Titanium Tubing, Seamless Annealed, 40,000 psi (275 MPa) Yield Strength
- SAE AMS4942E-2006 Titanium Tubing, Seamless Annealed, 40,000 psi (275 MPa) Yield Strength
- SAE AMS4941D-2003 Titanium Tubing, Welded Annealed, 40 ksi (276 MPa) Yield Strength
- SAE AMS4942C-1994 TITANIUM TUBING, SEAMLESS Annealed, 40,000 psi (275 MPa) Yield Strength
- SAE AMS4941C-1994 Titanium Tubing, Welded Annealed, 40,000 psi (275 MPa) Yield Strength
- SAE AMS4942H-2022 Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength
- SAE AMS4907H-2005 Titanium Alloy Sheet, Strip, and Plate, 6.0Al 4.0V, Extra Low Interstitials, Annealed
- SAE AMS4555H-2006 Leaded Brass, Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (050)
- SAE AMS4901-1952 TITANIUM SHEET AND STRIP Annealed - 70,000 psi Yield
- SAE AMS4909H-2008 Titanium Alloy, Sheet, Strip, and Plate 5Al 2.5Sn, Extra Low Interstitial Annealed
- SAE AMS5548-1958 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.1N High Temperature Anneal
- SAE AMS5548B-1966 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N High Temperature Annealed
- SAE AMS5548D-1967 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N High Temperature Annealed
- SAE AMS5548F-1979 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N High Temperature Annealed
- SAE AMS5548C-1967 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N High Temperature Annealed
- SAE AMS5548A-1959 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.1N High Temperature Anneal
- SAE AMS5548E-1968 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N High Temperature Annealed
- SAE AMS4966M-2003 Titanium Alloy, Forgings 5Al 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
- SAE AMS4966N-2008 Titanium Alloy, Forgings 5Al 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
- SAE AMS4555K-2015 Leaded Brass@ Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (050) (UNS C33000)
- SAE AMS4966J-1993 TITANIUM ALLOY FORGINGS 5Al - 2.5Sn Annealed, 110,000 psi (758 MPa) Yield Strength
- SAE AMS4966S-2022 Titanium Alloy, Forgings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
- SAE AMS4555L-2021 Leaded Brass, Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (O50) (UNS C33000)
- SAE AMS4044P-2023 Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-O) or, When Specified, “As Fabricated” (7075-F)
- SAE AMS6519B-2001 Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni 3.0Mo 1.4Ti 0.10Al Double Vacuum Melted, Annealed
- SAE AMS6519B-2006 Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti - 0.10Al Double Vacuum Melted, Annealed
- SAE AMS4031K-2022 Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-O) Annealed or, When Specified, “As Fabricated” (2219-F)
- SAE AMS4908F-1988 Titanium Alloy Sheet and Strip, 8Mn, Annealed, 110 ksi (760 MPa) Yield Strength
- SAE AMS4941E-2008 Titanium Tubing, Welded Annealed, 40 ksi (276 MPa) Yield Strength UNS R50400
- SAE AMS4966P-2013 Titanium Alloy, Forgings 5Al 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
- SAE AMS4908E-1993 TITANIUM ALLOY SHEET AND STRIP 8Mn Annealed, 110,000 psi (760 MPa) Yield Strength
- SAE AMS5315C-2011 DUCTILE (NODULAR) IRON CASTINGS, SAND 60,000 psi (415 MPa) Tensile Strength Ferritize Annealed
- SAE AMS6519A-1992 STEEL BARS, FORGINGS, TUBING, AND RINGS, MARAGING 19Ni - 3.0Mo - 1.4Ti - 0.10Al Double Vacuum Melted, Annealed
- SAE AMS5315D-2013 Ductile (Nodular) Iron Castings, Sand 60,000 psi (415 MPa) Tensile Strength Ferritize Annealed
- SAE AMS4985E-2018 Titanium Alloy, Investment Castings 6Al - 4V 130 UTS, 120 YS, 6% EL Hot Isostatically Pressed Anneal Optional or When Specified
- SAE AMS4940D-2023 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength
- SAE AMS4902M-2023 Titanium Sheet, Strip, and Plate Commercially Pure Annealed 40.0 ksi (276 MPa) Yield Strength
- SAE AMS4926P-2019 Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
- SAE AS4851A-2005 Relative Thermal Life and Temperature Index for Insulated Electric Wire
- SAE AMS5891B-2007 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La Annealed UNS N06230
- SAE AMS5916A-2009 Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 35Fe 24Cr 37Ni 0.65Cb 0.2N Annealed
- SAE AMS6514J-2017 Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed
- SAE AMS4940-2003 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength
- SAE AMS4926L-2007 Titanium Alloy, Bars, Wire, and Rings, 5Al 2.5Sn, Annealed, 110 ksi (758 MPa) Yield Strength
- SAE AMS4900K-1995 TITANIUM SHEET, STRIP, AND PLATE Commercially Pure Annealed, 55.0 ksi (379 MPa) Yield Strength
- SAE AMS4902F-1995 TITANIUM SHEET, STRIP, AND PLATE Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength
- SAE AMS4900S-2023 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength
- SAE AMS5548P-2007 Steel, Corrosion and Heat Resistant, Sheet and Strip 16.5Cr - 4.5Ni - 2.9Mo - 0.10N 1850 to 1975 Degrees F (1010 to 1079 Degrees C) Annealed UNS S35000
- SAE AMS4900L-2001 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55.0 ksi (379 MPa) Yield Strength
- SAE AMS4902J-2009 Titanium Sheet, Strip, and Plate Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength
- SAE AMS4963C-2012 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Annealed, Heat Treatable, Modified Strength
- SAE AMS4940B-2012 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength
- SAE AMS4900P-2014 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed@ 55 ksi (379 MPa) Yield Strength (UNS R50550)
- SAE AMS4963E-2020 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified Strength
- SAE AMS6515-2008 Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 12.0Co - 4.9Mo - 1.40Ti - 0.10Al Double Vacuum Melted, Annealed UNS K93540
- SAE AMS6514E-2003 Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed UNS K93120
- SAE AMS4901N-2002 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70 ksi (485 MPa)
- SAE AMS4902H-2006 Titanium Sheet, Strip, and Plate Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength
- SAE AMS4902K-2013 Titanium Sheet, Strip, and Plate, Commercially-Pure, Annealed 40.0 ksi (276 MPa) Yield Strength
- SAE AMS4926K-2001 Titanium Alloy, Bars, Wire, and Rings, 5Al 2.5Sn, Annealed, 110 ksi (758 MPa) Yield Strength
- SAE AMS4926M-2011 Titanium Alloy, Bars, Wire, and Rings, 5Al 2.5Sn, Annealed, 110 ksi (758 MPa) Yield Strength
- SAE AMS5612J-2007 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Annealed UNS S41001
- SAE AMS6512J-2022 Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings, and Forging Stock 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed
- SAE AMS6514K-2022 Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings and Forging Stock 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed
CZ-CSN, annealing temperature
American Society for Testing and Materials (ASTM), annealing temperature
- ASTM B609/B609M-12e1 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
- ASTM B800-00 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
- ASTM B609/B609M-99(2010) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
- ASTM B800-05(2021) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
- ASTM B609/B609M-12(2016) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
- ASTM B68/B68M-11 Standard Specification for Seamless Copper Tube, Bright Annealed
- ASTM B609/B609M-99(2004) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
- ASTM B609/B609M-99 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
- ASTM B609/B609M-12 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
- ASTM B800-05 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
- ASTM B800-05(2011) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical PurposesAnnealed and Intermediate Tempers
- ASTM F1416-96(2003) Standard Guide for Selection of Time-Temperature Indicators
- ASTM F1416-96 Standard Guide for Selection of Time-Temperature Indicators
- ASTM B800-05(2015) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes&x2014;Annealed and Intermediate Tempers
- ASTM E814-11 Standard Test Method for Fire Tests of Penetration Firestop Systems
- ASTM F1416-96(2014) Standard Guide for Selection of Time-Temperature Indicators
- ASTM F1416-96(2019) Standard Guide for Selection of Time-Temperature Indicators
- ASTM F1416-96(2008) Standard Guide for Selection of Time-Temperature Indicators
- ASTM E307-72(1996)e1 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
- ASTM E307-72(2002) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
- ASTM C1099-07(2012) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
- ASTM C1099-07 Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
- ASTM D6207-97(2003) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
- ASTM D6207-97 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
- ASTM D6207-03(2007) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
- ASTM D6207-03 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
- ASTM D2219-97 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60176C Operation
- ASTM D2219-21 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 ��C Operation
- ASTM E307-72(2014) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
- ASTM E307-72(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
- ASTM D1929-19 Standard Test Method for Determining Ignition Temperature of Plastics
- ASTM D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics
- ASTM D1929-14 Standard Test Method for Determining Ignition Temperature of Plastics
- ASTM C863-00(2005) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
- ASTM C863-00 Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
- ASTM C863-00(2010) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
RO-ASRO, annealing temperature
- STAS 11455-1984 Strength determination at nails and screws pulling out
- STAS 10551-1976 UNSATURATED POLYESTER RESINS Determination of the maximum temperature and the rate of increase of temperature during the setting at 80°C
- STAS 128/2-1981 Refractory products DIFFERFNTIAL DETFRMINATION OF COMPRESSION DEFORMATION TEMPERATFRE
RU-GOST R, annealing temperature
- GOST 21727-1976 Water. Viscosity of water at 20 °C
- GOST R IEC 60331-11-2012 Tests for electric and optical cables under fire conditions. Circuit integrity. Part 11. Apparatus. Fire alone at a flame temperature of at least 750 °C
- GOST R IEC 60331-11-2003 Tests for electric and optical fibre cables under fire conditions. Circuit integrity. Part 11. Apparatus. Fire alone at a flame temperature of at least 750 °C
- GOST ISO 1893-2014 Refractory products. Determination of refractoriness under load. Differential method with rising temperature
- GOST R 55957-2014 Activated carbon. Standard test method for ignition temperature
- GOST R IEC 811-5-1-1995 Test methods specific to filling compounds of electric cables. Drop-point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at temperature 23 °C. D.c. resistivity at temperature 23 °C and 1
Japanese Industrial Standards Committee (JISC), annealing temperature
- JIS R 3103-2:2001 Viscosity and viscometric fixed points of glass -- Part 2: Determination of annealing point and strain point by fiber elongation
GM Daewoo, annealing temperature
Standard Association of Australia （SAA）, annealing temperature
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., annealing temperature
- ASHRAE DA-07-068-2007 The effects of thermostat Setback and Setup on Seasonal Energy Consumption@ Surface Temperatures@ and Recovery Times at the CCHT Twin House Research Facility
- ASHRAE 3817-1994 Time-Temperature-Humidity Relations for the Storage of Fresh Commodities
- ASHRAE 4399-2000 On the Temperatures in Forced-Ventilation Fires
- ASHRAE LO-09-070-2009 Functional Exergy Efficiency at Near-Environmental Temperatures
Professional Standard - Military and Civilian Products, annealing temperature
- WJ 1878-1989 Determination method of flame length and duration of flash cap
- WJ 1905-1990 Determination of pyrotechnic combustion agent flame temperature by thermal radiation method
British Standards Institution (BSI), annealing temperature
- BS EN 1252-1:1998 Cryogenic vessels. Materials. Toughness requirements for temperatures below -80C
- BS 7908:1999 Packaging - Temperature and time-temperature indicators - Performance specification and reference testing
- BS 1041-7:1988 Temperature measurement - Guide to selection and use of temperature/time indicators
- BS EN ISO 2578:1999 Plastics. Determination of the time-temperature limits after prolonged exposure to heat
- BS EN 2997-001:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Technical specification
- BS ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
- BS EN 2997-011:2010 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Dummy receptacle - Product standard
- BS EN 2997-008:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Plug - Product standard
- BS EN 2997-011:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Dummy receptacle - Product standard
- BS EN 2997-010:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Protective cover for plug - Product standard
- BS EN 2997-002:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Specification of performance and contact arrangements
- BS EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
- BS ISO 12230:2012 Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength
- BS EN 2997-009:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Protective cover for receptacle - Product standard
- BS EN 2997-005:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Hermetic square flange receptacle - Product standard
- BS EN 2997-003:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Square flange receptacle - Product standard
- BS EN 2997-002:2012 Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Specification of performance and contact and contact ar
- BS EN 2997-005:2012 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65°C to 175°C continuous, 200°C continuous, 260°C peak. Hermetic square flange receptacle. Product standard
- BS EN 2997-002:2016 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak. Specification of performance and contac
- BS EN 2997-004:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Jam-nut mounted receptacle - Product standard
- BS EN 2997-003:2012 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Square flange receptacle
- BS 7034-7:1988 Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
- PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement. Correction for temperature when testing with the CPX method
- BS EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
- BS EN 50281-2-1:1999 Electrical apparatus for use in the presence of combustible dust. Test methods. Methods of determining minimum ignition temperatures
- BS EN 2997-006:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Hermetic jam-nut mounted receptacle - Product standar
International Organization for Standardization (ISO), annealing temperature
- ISO/R 1893:1970 Refractory products — Determination of refractoriness under load (Differential — With rising temperature)
- ISO 2578:1974 Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
- ISO/CD 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength
- ISO 528:1983 Refractory products; Determination of pyrometric cone equivalent (refractoriness)
- ISO 471:1977 Title missing - Legacy paper document
- ISO 471:1995 Rubber - Temperatures, humidities and times for conditioning and testing
- ISO/CD 4076 Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength
- ISO 24033:2006 Pipes made of raised-temperature-resistance polyethylene (PE-RT) - Effect of time and temperature on the expected strength
- ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
- ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
- ISO 871:2022 Plastics — Determination of ignition temperature using a hot-air furnace
- ISO 3213:2009 Polypropylene (PP) pipes - Effect of time and temperature on the expected strength
- ISO 12230:1996 Polybutene (PB) pipes - Effect of time and temperature on the expected strength
- ISO 3213:1996 Polypropylene (PP) pipes - Effect of time and temperature on expected strength
- ISO 1893:2007 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
- ISO/CD 4070 Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
- ISO 3384:1986 Rubber, vulcanized; Determination of stress relaxation in compression at ambient and at elevated temperatures
- ISO 5013:1985 Refractory products; Determination of modulus of rupture at elevated temperatures
- ISO 7884-7:1987 Glass; Viscosity and viscometric fixed points; Part 7 : Determination of annealing point and strain point by beam bending
- ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
- ISO 22685:2021 Refractory products — Determination of compressive strength at elevated temperature
- ISO 10146:1997 Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength
- ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces
German Institute for Standardization, annealing temperature
- DIN 17022-1:1994-10 Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components
- DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
- DIN EN ISO 1893:2008-09 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007); German version EN ISO 1893:2008
- DIN EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007); German version EN ISO 1893:2008
- DIN 54836:1984-02 Testing of combustible materials; determination of ignition temperature
- DIN ISO 7884-7:1998 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987)
- DIN EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
Heilongjiang Provincial Standard of the People's Republic of China, annealing temperature
- DB23/T 2582-2020 Technical Regulations for Restoration of Moderately Degraded Natural Temperate Grassland
ESDU - Engineering Sciences Data Unit, annealing temperature
- ESDU 89023-1989 Temperatures in plates subjected to a recovery temperature varying linearly with time.
Association of German Mechanical Engineers, annealing temperature
KR-KS, annealing temperature
- KS M ISO 2578-2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
- KS M ISO 871-2019 Plastics — Determination of ignition temperature using a hot-air furnace
- KS M ISO 10146-2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
ZA-SANS, annealing temperature
- SANS 5909:1979 Refractoriness under load (with rising temperature) of refractory bricks
- SANS 5908:1979 Pyrometric cone equivalent (refractoriness) of refractory bricks and materials
- SANS 5919:1980 Modulus of rupture at elevated temperatures of dense refractory bricks
- SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing
- SANS 5920:1980 Modulus of rupture at room temperature of dense and insulating refractory bricks
PL-PKN, annealing temperature
IN-BIS, annealing temperature
- IS 7820-1975
- IS 13867-1993 Rubber. Standard temperatures, humidities and times for the conditioning and time interval between vulcanization and tersting of test pieces
Malaysia Standards, annealing temperature
- MS 1523-2001 Rubber-Temperatures,Humidities and times for conditioning and testing
国家市场监督管理总局、中国国家标准化管理委员会, annealing temperature
- GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures
- GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures
- GB/T 16430-2018 Determination of the minimum ignition temperature of dust layer
Institute of Interconnecting and Packaging Electronic Circuits (IPC), annealing temperature
- IPC TR-585-2006 Time, Temperature and Humidity Stress of Final Board Finish Solderability
International Electrotechnical Commission (IEC), annealing temperature
- IEC 60331-11:2009 Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
- IEC 60331-11:1999/AMD1:2009 Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C; Amendment 1
Indonesia Standards, annealing temperature
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, annealing temperature
- GB/T 18511-2017 Determination of ignition temperature of coal
- GB/T 34218-2017 Refractory products—Determination of compressive strength at elevated temperature
- GB/T 34219-2017 Refractory matericals—Determination of tensile strength at room temperature
- GB/T 34220-2017 Refractory Products—Determination of tensile strength at elevated temperature
- GB/T 34217-2017 Refractory products—Determination of torsion strength at elevated temperature
- GB/T 3001-2017 Refractory products—Determination of modulus of rupture at ambient temperature
- GB/T 3002-2017 Refractory products—Determination of modulus of rupture at elevated temperatures
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, annealing temperature
- GB/T 18511-2001 Determination of ignition temperature of coal
- GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
- GB/T 16429-1996 Determination of the minimum ignition temperature of dust cloud
- GB/T 5989-1998 Refractory products--Determination of Refractoriness-under-load--Differential-with rising temperature
- GB/T 5989-2023 Refractory products—Determination of refractoriness under load(differential method with rising temperature)
- GB/T 5989-2008 Refractory products.Determination of refractoriness-under-load.Differential method with rising temperature
- GB/T 2941-1991 Rubber-Standard temperatures,humidities and times for the conditioning environmental and testing of test pieces
- GB/T 7142-2002 Determination of time-temperature limits for plasties after prolonged exposure to heat
- GB/T 16430-1996 Determination of the minimum ignition temperature of dust layer
- GB/T 3002-1982 Test method for modulus of rupture of refractory products at elevated temperature
- GB/T 5072-2008 Refractories.Determination of cold compressive strength
- GB/T 3002-2004 Refractory products-Determination of modulus of rupture at elevated temperatures
- GB/T 3001-2007 Refractory products.Determination of modulus of rupture at ambient temperature
Danish Standards Foundation, annealing temperature
- DS/EN ISO 2578:1999 Plastics - Determination of time-temperature limits after prolonged exposure to heat
- DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
- DS/EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
- DS/ISO 3384:1989 Rubber, vulcanized. Determination of stress relaxation in compression at ambient and at elevated temperatures
- DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
- DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
Taiwan Provincial Standard of the People's Republic of China, annealing temperature
- CNS 617-1998 Method for determination of pyrometric cone equivalent (retractoriness) of refractory products
未注明发布机构, annealing temperature
- BS 1041-7:1988(1999) Temperature measurement — Part 7 : Guide to selection and use of temperature / time indicators
BE-NBN, annealing temperature
- NBN-EN 24672-1993 Rubber and plastics hoses. Sub-ambiant temperature flexibility tests (ISO 4672:1988)
- NBN T 03-165-1980 Sodium chloride for industrial use - Détermination of the loss of mass at 110 °C
Professional Standard - Aerospace, annealing temperature
- QJ 2968-1997 Method for measuring medium and high temperature temperature of liquid rocket engine
- QJ 1086-1986 Cryogenic temperature measurement specification for liquid rocket engine test
- QJ 2902-1997 Solid rocket motor temperature test method
- QJ 1230-1987 Estimation of Uncertainty in Temperature Measurement of Liquid Rocket Engine
- QJ 1647-1989 Specifications for surface temperature measurement of rocket motor tests
American National Standards Institute （ANSI), annealing temperature
- ANSI/IEEE 738:2006 Standard for Calculating the Current-Temperature of Bare Overhead Conductors
ES-UNE, annealing temperature
- UNE-EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007) (Endorsed by AENOR in August of 2008.)
Professional Standard - Ferrous Metallurgy, annealing temperature
- YB/T 4024-1991 Test method for refractoriness under load of refractory mortars
- YB 4024-1991 Test method for softening temperature of refractory mud under load (heating method)
- YB 4022-1991 Test method for load softening temperature of refractory mud (differential-temperature rise method)
- YB/T 2208-1998 Test method for crushing strength of castable refractory at elevated temperature
- YB/T 370-1995 Test method for refractoriness under load of refractory products (non-differential,with rising temperature)
- YB/T 370-2016 Refractoies.Determination of refractoriness under load (non-differential, with rising temperature)
- YB/T 2203-1998 Test method for refractoriness under load of castable refractory.Non-differential,with rising temperature
Military Standard of the People's Republic of China-General Armament Department, annealing temperature
- GJB 5309.25-2004 Test methods for pyrotechnics Part 25: Determination of flash cap flame length and duration
- GJB 5021-2001 Solid rocket motor temperature test method
BR-ABNT, annealing temperature
Professional Standard - Electricity, annealing temperature
- DL/T 2148-2020 Method for Determination of Biomass Ignition Temperature
- DL/T 1446-2015 Measurement of ignition temperature of pulverized coal-air flow
- DL/T 2418-2021 Technical specifications for temperature measuring devices in thermal power plants
Lithuanian Standards Office , annealing temperature
- LST EN ISO 2578:2002 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)
- LST EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007)
AENOR, annealing temperature
- UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)
Group Standards of the People's Republic of China, annealing temperature
- T/JLA 004-2023 Calibration method for temperature and time parameters of washer-disinfector
- T/CAME 37-2021 Technical requirement of temperature and humidity real-time monitoring system for baby incubator
- T/CCIAA 8-2021 Technical code for coke oven end flue temperature determination
- T/CCIAA 13-2021 Technical code for coke oven adjacent flue temperature difference determination
HU-MSZT, annealing temperature
European Committee for Standardization (CEN), annealing temperature
- EN 2997-003:2012 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 003: Square flange receptacle - Product standar
- EN 2997-005:2012 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 005: Hermetic square flange receptacle - Produc
- EN 1252-1:1998/AC:1998 Cryogenic Vessels - Materials - Part 1: Toughness Requirements for Temperatures Below - 80 Degrees C Ratified European Text
- EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
- EN 1252-1:1998 Cryogenic vessels Materials Part 1: Toughness requirements for temperatures below p80 °C (Incorporating corrigendum December 1998)
CEN - European Committee for Standardization, annealing temperature
- EN 2997-003:2006 Aerospace series - Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures -65°C to 175°C continuous@ 200°C continuous@ 260°C peak - Part 003: Square flange receptacle - Product standard
- EN 2997-005:2006 Aerospace series - Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures -65°C to 175°C continuous@ 200°C continuous@ 260°C peak - Part 005: Hermetic square flange receptacle - Product sta
CL-INN, annealing temperature
API - American Petroleum Institute, annealing temperature
PT-IPQ, annealing temperature
IPC - Association Connecting Electronics Industries, annealing temperature
- IPC TR-585 CD-2006 Time@ Temperature and Humidity Stress of Final Board Finish Solderability
GM North America, annealing temperature
- GM GMN11192-2011 High Strength Recovery Annealed Cold Reduced Sheet Steel (Issue 4; Do Not Use on New Programs; No Replacement)