ZH
RU
ES

How to Prepare Standards

How to Prepare Standards, Total:318 items.

In the international standard classification, How to Prepare Standards involves: Paint coating processes, Products of the textile industry, Testing of metals, Tea. Coffee. Cocoa, Inorganic chemicals, Electronic components in general, Coals, Graphic technology, Optics and optical measurements, Construction industry, Powder metallurgy, Water quality, Road engineering, Protective equipment, Refractories, Construction materials, Cereals, pulses and derived products, Analytical chemistry, Metrology and measurement in general, Linear and angular measurements, Petroleum products in general, Protection against fire, Raw materials for rubber and plastics, General methods of tests and analysis for food products, Laboratory medicine, Inks. Printing inks, Rubber, Lubricants, industrial oils and related products, Paint ingredients, Fuels, Nuclear energy engineering, Rubber and plastics products, Soil quality. Pedology, Metalliferous minerals, Occupational safety. Industrial hygiene, Plant and equipment for the food industry, Computer graphics, Beverages, Particle size analysis. Sieving, Plastics, Surface treatment and coating, Earthworks. Excavations. Foundation construction. Underground works, Materials for aerospace construction, Electromechanical components for electronic and telecommunications equipment, Medical equipment, Wastes, Environmental protection, Farming and forestry, Tobacco, tobacco products and related equipment, Structures of buildings, Paints and varnishes, Organic chemicals.

US-CFR-file, How to Prepare Standards

CFR 7-54.6-2014 Agriculture. Part54:Meats, prepared meats, and meat products (grading, certification, and standards). Subpart A:Regulations. Section54.6:How to obtain service.
CFR 33-148.702-2013 Navigation and navigable waters. Part148:Deepwater ports: general. Section148.702:How were the environmental review criteria developed?
CFR 21-803.23-2014 Food and Drugs. Part803:Medical device reporting (Eff. 8-14-15). Section803.23:Where can I find information on how to prepare and submit an MDR in electronic format?
CFR 40-86.1860-17-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1860-17:How to comply with the Tier 3 fleet-average standards.
CFR 40-60.5415-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5415:How do I demonstrate continuous compliance with the standards for my gas well affected facility, my centrifugal compressor affected facility, my stationa
CFR 40-86.1864-10-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1864-10:How to comply with the fleet average cold temperature NMHC standards.
CFR 40-86.1865-12-2013 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1865-12:How to comply with the fleet average CO2 standards.
CFR 25-547.5-2013 Indians. Part547:Minimum technical standards for class ii gaming systems and equipment. Section547.5:How does a tribal government, TGRA, or tribal gaming operation comply with this part?
CFR 40-60.5410-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5410:How do I demonstrate initial compliance with the standards for my gas well affected facility, my centrifugal compressor affected facility, my reciprocati

American Society for Testing and Materials (ASTM), How to Prepare Standards

ASTM D5531-94(1999) Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D5531-94(2003) Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D5531-17 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D5531-17(2023) Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D8030/D8030M-19 Standard Practice for Sample Preparation for GCCM
ASTM E3-01(2007)e1 Standard Guide for Preparation of Metallographic Specimens
ASTM D5531-05(2011) Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D8030/D8030M-23 Standard Practice for Sample Preparation for GCCM
ASTM D8030/D8030M-16 Standard Practice for Sample Preparation for GCCM
ASTM D5531-05 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D2013/D2013M-09 Standard Practice for Preparing Coal Samples for Analysis
ASTM E259-98 Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical Geometry and Bi-Directional Geometries
ASTM E259-06 Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries
ASTM D2013-04 Standard Practice of Preparing Coal Samples for Analysis
ASTM B925-08 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
ASTM D5905-98(2013) Standard Practice for the Preparation of Substitute Wastewater
ASTM D7308-17 Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
ASTM D7329-07 Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
ASTM D7329-07(2012) Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
ASTM D7329-07(2018) Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
ASTM D2013-03 Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013-01 Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013-00ae1 Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013-00 Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013-00a Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013-07 Standard Practice for Preparing Coal Samples for Analysis
ASTM D2013-86(1994) Standard Method of Preparing Coal Samples for Analysis
ASTM D2013/D2013M-11 Standard Practice for Preparing Coal Samples for Analysis
ASTM D2013/D2013M-12 Standard Practice for Preparing Coal Samples for Analysis
ASTM D2013/D2013M-20 Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013/D2013M-21 Standard Practice for Preparing Coal Samples for Analysis
ASTM B665-19 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM C975-87(1998) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
ASTM C975-87(2020) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
ASTM C975-87(2015) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
ASTM C50-00(2006) Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM C50-00 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM D4638-03 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM B665-92(1997) Standard Practice for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM D3326-07 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D3326-07(2011) Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM E1078-14 Standard Guide for Specimen Preparation and Mounting in Surface Analysis
ASTM D7308-17(2022) Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
ASTM D7308-07(2012) Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
ASTM D6926-20 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
ASTM E2579-07 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2579-21 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2579-23 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2579-23a Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E2579-15 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM C973-87(2015) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
ASTM D7308-07 Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
ASTM D4638-03(2007) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM D3976-92(2005) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM D3976-92(2001) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM D3976-92(1996) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM D4638-95a(1999) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM D6544-12 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
ASTM B665-08 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM D3976-92(2010) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM C862-02 Standard Practice for Preparing Refractory Concrete Specimens by Casting
ASTM D3326-90(1996)e1 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D1485-86(1997)e1 Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation
ASTM D3326-90(2002) Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM B665-08(2012) Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM C862-16(2020) Standard Practice for Preparing Refractory Concrete Specimens by Casting
ASTM D4638-16(2021)e1 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM D3326-07(2017) Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D4638-16(2023) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM D1485-07(2015) Standard Practice for Rubber from Natural Sources&x2014;Sampling and Sample Preparation
ASTM D3976-92(2015) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM D3183-02 Standard Practice for Rubber8212;Preparation of Pieces for Test Purposes from Products
ASTM C973-87(1998) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
ASTM C973-87(2020) Standard Practice for Preparing Test Specimens from Basic Refractory Gunning Products by Pressing
ASTM E2579-20 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM C974-87(2009) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
ASTM E2579-19 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM C974-87(2015) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
ASTM E2688-18 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
ASTM D7455-14 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D4941-89(2004) Standard Practice for Preparing Drawdowns of Artists'' Paste Paints
ASTM D4941-06 Standard Practice for Preparing Drawdowns of Artists' Paste Paints
ASTM D4941-89(1999)e1 Standard Practice for Preparing Drawdowns of Artists'' Paste Paints
ASTM D4638-11 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM D4941-06(2010) Standard Practice for Preparing Drawdowns of Artists' Paste Paints
ASTM D1485-07(2020) Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation
ASTM D3976-22 Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM B925-15 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
ASTM D3694-96(2017) Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
ASTM D6969-23 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM D3183-09 Standard Practice for Rubberx2014;Preparation of Pieces for Test Purposes from Products
ASTM D3183-10(2015) Standard Practice for Rubber&x2014;Preparation of Pieces for Test Purposes from Products
ASTM C50/C50M-12 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM C50/C50M-13(2019) Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM C50/C50M-13 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM E2579-13 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM C973-87(2009) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
ASTM E2579-12 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM D7455-19 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D7986-15 Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
ASTM D3183-07 Standard Practice for Rubber8212;Preparation of Product Pieces for Test Purposes from Products
ASTM D2797-07 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D5139-90(2001) Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM D4204-00 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D2797-04 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D5139-10 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM G39-99 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM D5139-90(1996) Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM D6969-15 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM D6969-16 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM F3634-23 Standard Guide for Preparing Weathered Samples of Oil Using a Rotary Evaporator
ASTM G39-99(2021) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM D5139-19 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM D4204-12 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM C999-17 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
ASTM D4638-16 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM D4204-16 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D4204-16(2023) Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D7455-08 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D6544-11 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
ASTM D2797/D2797M-21 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM E2015-99 Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
ASTM D6926-10 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
ASTM D6959-03 Standard Practice for Data Exchange Format for Sewn Product Plotting Devices
ASTM D2797/D2797M-21a Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D6544-21 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
ASTM D5139-12 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM D4204-06 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM E2015-04 Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
ASTM D695-08 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D346/D346M-11 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM C1140/C1140M-11 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM D6959-08 Standard Practice for Data Exchange Format for Sewn Product Plotting Devices
ASTM D346/D346M-11(2019)e1 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM E2015-04(2014) Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
ASTM D8493-23 Standard Guide for Sample Preparation of Cannabis and Hemp Inflorescence for Laboratory Analysis
ASTM C975-87(2004) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
ASTM C975-87(2009) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
ASTM D8079-16 Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor
ASTM D6386-16 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D6386-16a Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D4543-04 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM B594-97 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
ASTM B594-02 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
ASTM F1843-09 Standard Practice for Sample Preparation of Transparent Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements
ASTM E1726-21 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM D2797/D2797M-11a Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM B594-06 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
ASTM D3183-10 Standard Practice for Rubberx2014;Preparation of Pieces for Test Purposes from Products
ASTM D1485-07 Standard Practice for Rubber from Natural Sources8212;Sampling and Sample Preparation
ASTM D1485-86(2002) Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation
ASTM D3183-84(1998) Standard Practice for Rubber-Preparation of Pieces for Test Purposes from Products
ASTM E1306-17 Standard Practice for Preparation of Metal and Alloy Samples for Chemical Analysis by Electric Arc Remelting
ASTM E829-23 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
ASTM D3183-10(2019) Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM B594-09 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
ASTM B594-13 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
ASTM D6386-99 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D6386-99(2005) Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM E1726-95 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM D3975-93(2003) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM D6081-98(2004) Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
ASTM D6081-98 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
ASTM D6081-98(2009) Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
ASTM E1726-20 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E1726-16 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E829-16 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
ASTM D6081-22 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
ASTM D7893-13 Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
ASTM D6081-98(2014) Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
ASTM E2573-17 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E2573-19 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM D6081-19 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
ASTM D421-85(2002) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM D5166-97 Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D3891-96 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM D3891-96(2002)e1 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM D5166-97(2003) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D5166-97(2008) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D3891-08 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM D5166-97(2008)e1 Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D6081-20 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
ASTM D7893-13(2018) Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
ASTM D3891-23 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM D4278-02 Standard Test Method for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis
ASTM D3891-08(2014) Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
ASTM D4320/D4320M-09 Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters
ASTM D5166-97(2016) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven

Association Francaise de Normalisation, How to Prepare Standards

FD E11-157:1997 Geometrical product specifications (GPS). Coordinate measuring machines. Guideline for the preparation of specifications.
FD ISO/TR 21828:2010 Lignes directrices relatives aux normes disponibles pour la préparation et l'essai des produits réfractaires non façonnés
NF E11-015:2009 Geometrical product specifications (GPS) - Dimensional measuring equipment : standard reference measuring rods with spherical ends - Design and metrological requirements.
FD B40-674*FD ISO/TR 21828:2010 Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
NF EN ISO 10993-12:2021 Evaluation biologique des dispositifs médicaux - Partie 12 : préparation des échantillons et matériaux de référence

AENOR, How to Prepare Standards

UNE 208003-003:2003 IN Guidelines on how to use anechoic enclosures that do not fulfil the requirements regarding normalized site attenuation for pre-compliance tests of products.

British Standards Institution (BSI), How to Prepare Standards

PD 6591:1996 Guidelines on how to use anechoic enclosures that do not fulfil the requirements regarding normalized site attenuation for pre-compliance tests of products
BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS 7079:2009 General introduction to standards for preparation of steel substrates before application of paints and related products
BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS PD ISO/TR 19244:2014 Guidance on transition periods for standards developed by ISO/TC 84. Devices for administration of medicinal products and catheters

Professional Standard - Agriculture, How to Prepare Standards

21药典三部-2020 General Rules for Biological Products Preparation and Calibration of National Standard Materials for Biological Products
16药典三部-2015 General Rules for Biological Products Preparation and Calibration Procedures for National Standard Substances of Biological Products
2药典三部-2010 General headings National standard substance preparation and calibration procedures for biological products
7兽药典三部-2015 General Chapter 3007 Preparation and Calibration Regulations of National Standard Materials for Veterinary Biological Products
367药典四部-2020 9000 Guiding Principles 9901 Guiding Principles for the Preparation of National Drug Reference Materials
340药典四部-2015 9000 Guiding Principles 9901 Guiding Principles for the Preparation of National Drug Reference Materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to Prepare Standards

GB/T 18795-2002 The technology requirement for making standard samples of tea
GB/T 18795-2012 Technology requirement for making standard samples of tea
GB/T 6730.85-2023 Preparation and determination of certified reference samples for iron ore chemical analysis
GB/T 42351.1-2023 Preparation of Particle Standards Part 1: Polydisperse Standards Based on Picket Fence Distribution of Monodisperse Spherical Particles

Professional Standard - Chemical Industry, How to Prepare Standards

HG/T 3696.1-2011 Inorganic chemicals for industrical use Preparations of standard and reagent solutions for chemical analysis.Part 1:Preparations of standard volumetric solutions
HG/T 3696.2-2011 Inorganic chemicals for industrical use.Preparations of standard and reagent solutions for chemical analysis.Part 2: Preparations of standard solutions for impurity
HG/T 3696.3-2011 Inorganic chemicals for industrical use.Preparations of standard and reagent solutions for chemical analysis.Part 3: Preparations of reagent solutions
HG/T 3696.1-2002 Inorganic chemical products Preparations of standard volumetric solutions for chemical analysis
HG/T 3696.2-2002 Inorganic chemical products Preparations of standard solutions for chemical analysis

Professional Standard - Electron, How to Prepare Standards

SJ/Z 3206.7-1989 Geneeral rules for preparation and sampling sample for emission spectrum analysis

Professional Standard - Commodity Inspection, How to Prepare Standards

SN/T 3461-2012 Requirements of reference material preparation for plant pathogeny

Korean Agency for Technology and Standards (KATS), How to Prepare Standards

KS X ISO 5737-2002(2007) Prints－Preparation of standard prints for optical tests
KS P ISO 10993-12:2007 Biological evaluation of medical devices-Part 12:Sample preparation and reference materials
KS P ISO 10993-12:2014 Biological evaluation of medical devices — Part 12: Sample preparation and reference materials
KS F 2341-2022 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants

Group Standards of the People's Republic of China, How to Prepare Standards

T/CECS 1156-2022 Product Information Model Standard for Building Materials, Products and Equipment
T/GZRHJX 005-2019 Technical specification for thereference materials preparation of Daqu Jiang-xiang Baijiu series in Renhuai production region

Underwriters Laboratories (UL), How to Prepare Standards

UL 982 BULLETIN-2006 UL Standard for Safety Motor-Operated Household Food Preparing Machines
UL 982 BULLETIN-2004 UL Standard for Safety Motor-Operated Household Food Preparing Machines
UL 763 BULLETIN-2003 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines
UL 763 BULLETIN-2002 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines
UL 763-2018 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines (Fifth Edition)
UL 982 BULLETINS-2002 UL Standard for Safety Motor-Operated Household Food Preparing Machines (01/02/2002 (48p); 02/01/2002 (2p))
UL 982 BULLETINS-2003 UL Standard for Safety Motor-Operated Household Food Preparing Machines (05/23/2003 (28p); 04/24/2003 (22p))
UL 916 CRD-2012 UL Standard for Safety Energy Management Equipment - Section/Paragraph Reference: 45.5 Subject: Abnormal Switching Test - Requirements for controls using electronic triggering techniques@ such as zero-crossing switching@ to switch the control’s output swi
UL 1917 CRD-2012 UL Standard for Safety Solid-State Fan Speed Controls - Subject: Abnormal Switching Test - Requirements for controls using electronic triggering techniques@ such as zero-crossing switching@ to switch the control’s output switching device (Edition 3: Febru
UL 982 BULLETIN-2016 UL Standard for Safety Motor-Operated Household Food Preparing Machines (COMMENTS DUE: February 19@ 2016)
UL 982 BULLETIN-2008 UL Standard for Safety Motor-Operated Household Food Preparing Machines (COMMENTS DUE: November 20@ 2008)
UL 982 BULLETIN-2014 UL Standard for Safety Motor-Operated Household Food Preparing Machines (COMMENTS DUE: July 21@ 2014)
UL 982 BULLETIN-2015 UL Standard for Safety Motor-Operated Household Food Preparing Machines (COMMENTS DUE: February 16@ 2015)
UL 982 BULLETIN-2013 UL Standard for Safety Motor-Operated Household Food Preparing Machines (COMMENTS DUE: March 11@ 2013)
UL 982 BULLETIN-2019 UL Standard for Safety Motor-Operated Household Food Preparing Machines (COMMENTS DUE: July 1@ 2019)
UL 763 BULLETIN-2018 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines (COMMENTS DUE: June 1@ 2018)
UL 982 BULLETIN-2018 UL Standard for Safety Motor-Operated Household Food Preparing Machines (COMMENTS DUE: November 5@ 2018)
UL 982 BULLETIN-2017 UL Standard for Safety Motor-Operated Household Food Preparing Machines (COMMENTS DUE: July 10@ 2017)
UL 763 BULLETIN-2017 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines (COMMENTS DUE: July 17@ 2017)
UL 763 BULLETIN-2011 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines (COMMENTS DUE: April 11@ 2011)
UL 763 BULLETIN-2016 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines (COMMENTS DUE: OCTOBER 14@ 2016)
UL 763 BULLETIN-2010 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines (COMMENTS DUE: November 29@ 2010)
UL 763 BULLETIN-2013 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines (COMMENTS DUE: October 14@ 2013)
UL 763 BULLETIN-2009 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines (COMMENTS DUE: July 08@ 2009)
UL 763 BULLETIN-2014 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines (COMMENTS DUE: May 19@ 2014)
UL 763 BULLETIN-2012 UL Standard for Safety Motor-Operated Commercial Food Preparing Machines (COMMENTS DUE: August 06@ 2012)
UL 982 BULLETIN-2012 UL Standard for Safety Motor-Operated Household Food Preparing Machines (COMMENTS DUE: June 04@ 2012)

National Fire Protection Association (NFPA), How to Prepare Standards

NFPA 82 ERTA-2010 Standard on Incinerators and Waste and Linen Handling Systems and Equipment
NFPA 82-2009 Standard on Incinerators and Waste and Linen Handling Systems and Equipment Effective Date: 12/29/2008

Professional Standard - Grain, How to Prepare Standards

LS/T 1216-2010 Technical specifications for making reference material of head rice yield of paddy
LS/T 1214-2008 Technical specification for making standard samples of wheat hardness index

VE-FONDONORMA, How to Prepare Standards

COVENIN 988-1975

Yunnan Provincial Standard of the People's Republic of China, How to Prepare Standards

DB53/T 143.3-2005 Luxi Pyrethrum Comprehensive Standard Part III: Preparation of Pyrethrin Standards

AASHTO - American Association of State Highway and Transportation Officials, How to Prepare Standards

PP 95-2018 Standard Specification for Preparation of Indirect Tension Performance Test Specimens
T 146-1996 Standard Method of Test for Wet Preparation of Disturbed Soil Samples for Test
R 58-2011 Standard Practice for Dry Preparation of Disturbed Soil and Soil-Aggregate Samples for Test

KR-KS, How to Prepare Standards

KS F 2425-2022 Standard practice for preparing concrete sample in the laboratory

European Committee for Standardization (CEN), How to Prepare Standards

EN ISO 10993-12:2021 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2021)
EN ISO 10993-12:1996 Biological Evaluation of Medical Devices - Part 12: Sample Preparation and Reference Materials ISO 10993-12 : 1996
EN 13804:2002 Foodstuffs - Determination of Trace Elements - Performance Criteria, General Considerations and Sample Preparation

CEN - European Committee for Standardization, How to Prepare Standards

EN ISO 10993-12:2009 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials
EN ISO 10993-12:2007 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials
EN ISO 10993-12:2012 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials
EN ISO 10993-12:2004 Biological Evaluation of Medical Devices - Part 12: Sample Preparation and Reference Materials

International Organization for Standardization (ISO), How to Prepare Standards

ISO 10993-12:2002 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials
ISO/TR 21828:2010 Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
ISO 10993-12:2021 Biological evaluation of medical devices — Part 12: Sample preparation and reference materials
ISO 10993-12:2012 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials
ISO 2834:1981 Printing inks; Preparation of standardized prints for determination of resistance to physical and chemical agents
ISO 3308:1977 Tobacco and tobacco products — Routine analytical cigarette-smoking machine — Definitions, standard conditions and auxiliary equipment

German Institute for Standardization, How to Prepare Standards

DIN 16519:1967 Testing of prints and inks in graphic arts; preparation of standard prints

RU-GOST R, How to Prepare Standards

GOST EN 13804-2013 Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation
GOST 12.2.124-1990 Occupational safety standards system. Alimentary product equipment. General safety requirements
GOST 16923-1983 Organic products. Preparation of standard solutions for analyses by diazotization and combination methods

Lithuanian Standards Office , How to Prepare Standards

LST EN 13804-2002 Foodstuffs - Determination of trace elements - Performance criteria, general considerations and sample preparation

American National Standards Institute （ANSI), How to Prepare Standards

ANSI/ASTM E2579:2020 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ANSI/ASTM E2579:2021 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
BS ISO 8062-4:2023 Tracked Changes. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules and general tolerances for castings using profile tolerancing in a general datum system (British Standard)
ANSI/ASTM E2231:2009 Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

Heilongjiang Provincial Standard of the People's Republic of China, How to Prepare Standards

DB23/T 1496.17-2012 Standards for the provision of labor protection articles Part 17: Pulp, paper and paper product production and processing personnel
DB23/T 1496.14-2020 Standards for the provision of labor protection articles Part 14: Tobacco and its product processing personnel
DB23/T 1496.14-2012 Standards for the provision of labor protection articles Part 14: Tobacco and its product processing personnel
DB23/T 1496.10-2020 Standards for the provision of labor protection articles Part 10: Production personnel for rubber and plastic products
DB23/T 1496.10-2012 Standards for the provision of labor protection articles Part 10: Production personnel for rubber and plastic products
DB23/T 1496.12-2021 Standards for the provision of labor protection articles Part 12: Cutting and sewing and leather and fur products processing and production personnel
DB23/T 1496.12-2012 Standards for the provision of labor protection articles Part 12: Cutting and sewing and leather and fur products processing and production personnel
DB23/T 1496.16-2021 Part 16 of Labor Protection Equipment Standards: Wood processing, wood-based panel production and wood product production personnel
DB23/T 1496.5-2012 Standards for Equipping Labor Protection Articles Part 5: Machinery Manufacturing and Processing Personnel
DB23/T 1496.3-2012 Labor protection equipment equipment standard part 3: Metal smelting and rolling personnel
DB23/T 1496.3-2020 Labor protection equipment equipment standard part 3: Metal smelting and rolling personnel
DB23/T 1496.16-2012 Standards for the provision of labor protection articles Part 16: Wood processing, wood-based panel production and wood product production personnel
DB23/T 1496.5-2017 Standards for the provision of labor protection articles Part 5 Basic processing personnel for machinery manufacturing
DB23/T 1495.5-2017 Standards for the provision of labor protection articles Part 5 Basic processing personnel for machinery manufacturing
DB23/T 1496.19-2012 Part 19 of the standard for the provision of labor protection articles: Glass, ceramics, enamel and their products production and processing personnel

Danish Standards Foundation, How to Prepare Standards

DS/ISO 10993-12:2021 Biological evaluation of medical devices – Part 12: Sample preparation and reference materials
DS/EN ISO 10993-12:2012 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials
DS/EN ISO 10993-12:2021 Biological evaluation of medical devices – Part 12: Sample preparation and reference materials (ISO 10993-12:2021)

PL-PKN, How to Prepare Standards

PN A75101-01-1990 Fruit and vegetable products Preparation of samples and testing methods General principles and rang? of standard

IT-UNI, How to Prepare Standards

UNI EN ISO 10993-12:2021 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials

TH-TISI, How to Prepare Standards

TIS 202.2-2004 Lime.part 2: standard practice for sampling and sample preparation of lime and limestone products

CU-NC, How to Prepare Standards

NC 40-161-1989 Manufacturing and Textile Industry. Preparation, Marking and Measurement of Fabrics and Garments Manufactured for Dimensional Variation Tests

The American Road & Transportation Builders Association, How to Prepare Standards

AASHTO PP 104-2021 Standard Practice for Sample Preparation and Polishing of Asphalt Mixture Specimens for Dynamic Friction Testing
AASHTO R 58-2011 Standard Practice for Dry Preparation of Disturbed Soil and Soil-Aggregate Samples for Test

Agricultural Standard of the People's Republic of China, How to Prepare Standards

农业部1782号公告-8-2012 Detection of genetically modified plants and derived products.Technical specification for manufacture of matrix reference material

Professional Standard - Light Industry, How to Prepare Standards

QB/T 2470-2000 Preparation of standard solution for titration analysis (volumetric analysis) of general test methods for cosmetics

Standard Association of Australia （SAA）, How to Prepare Standards

AS 1289.1.2.1:1998(R2013)

UNKNOWN, How to Prepare Standards

农业农村部公告第323号-8-2020