ZH

RU

ES

Infrared gas pool

Infrared gas pool, Total:295 items.

In the international standard classification, Infrared gas pool involves: Optoelectronics. Laser equipment, Analytical chemistry, Electromagnetic compatibility (EMC), Linear and angular measurements, Natural gas, Electricity. Magnetism. Electrical and magnetic measurements, Domestic, commercial and industrial heating appliances, Geology. Meteorology. Hydrology, Air quality, Aerospace electric equipment and systems, On-board equipment and instruments, Ferrous metals, Optics and optical measurements, Wind turbine systems and other alternative sources of energy, Tobacco, tobacco products and related equipment, Fluid storage devices, Terminology (principles and coordination), Components for electrical equipment, Accident and disaster control, Medical equipment, Road vehicle systems, Testing of metals, Burners. Boilers, Power transmission and distribution networks, Vocabularies, Ferroalloys, Applications of information technology, Non-ferrous metals, Non-destructive testing, Equipment for petroleum and natural gas industries, Electrical accessories, Measurement of volume, mass, density, viscosity, Rubber and plastics products, Insulating fluids, Power stations in general, Environmental protection, Organic chemicals, Soil quality. Pedology, Protection against crime, Non-metalliferous minerals, Semiconducting materials, Protection against fire, Switchgear and controlgear, Sacks. Bags, Nuclear energy engineering, Domestic electrical appliances in general, Body care equipment, Ceramics, Iron and steel products, Domestic safety, Optical equipment, Products of the chemical industry, Metrology and measurement in general, Electronic components in general.


Association Francaise de Normalisation, Infrared gas pool

  • NF C97-036*NF EN 61920:2005 Infrared free air applications.
  • NF X20-301:1978 Gas analysis by absorption of a non dispersive infra-red radiation beam.
  • NF X43-012:1974 Determination of carbon monoxide content in the ambient outdoor air, by absorption of an infrared radiation.
  • NF X20-361:1976 Gas analysis. Determination of carbon monoxide by absorption of a non dispersive infra-red radiation beam.
  • XP ISO/TS 19021:2019 Méthode pour déterminer les concentrations des gaz émis lors de l'essai ISO 5659-2 par spectroscopie infrarouge à transformée de Fourier
  • NF ISO 19702:2016 Lignes directrices pour l'analyse des gaz et des vapeurs dans les effluents du feu par spectroscopie infrarouge à transformée de Fourier (IRTF)
  • NF EN 13385:2002 Bouteilles à gaz transportables - Véhicules-batteries, pour gaz permanents et liquéfiés (sauf acétylène) - Contrôle au moment du remplissage
  • XP P92-021*XP ISO/TS 19021:2019 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • NF EN ISO 15106-2:2005 Plastiques - Film et feuille - Détermination du coefficient de transmission de vapeur d'eau - Partie 2 : méthode utilisant un détecteur infrarouge
  • NF T54-142-2*NF EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2 : infrared detection sensor method
  • NF X43-065*NF EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • NF EN 14626:2012 Air ambiant - Méthode normalisée de mesurage de la concentration en monoxyde de carbone par spectroscopie à rayonnement infrarouge non dispersif

International Electrotechnical Commission (IEC), Infrared gas pool

  • IEC 61920:2004 Infrared free air applications
  • IEC 61920:1998 Infrared transmission systems - Free air applications
  • IEC 60528:1975 Expression of performance of air quality infra-red analyzers
  • IEC 60335-2-27:2009+AMD1:2012 CSV Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

Korean Agency for Technology and Standards (KATS), Infrared gas pool

  • KS C IEC 61920-2005(2020) Infrared free air applications
  • KS I 2217-2009 Non-dispersive infrared gas analyzer
  • KS D ISO 17053-2006(2016) Steel and iron-Determination of oxygen-Infrared method after fusion under inert gas
  • KS I ISO 4224:2006 Ambient air-Determination of carbon monoxide-Non-dispersive infrared spectrometry method
  • KS D ISO 17053:2006 Steel and iron-Determination of oxygen-Infrared method after fusion under inert gas
  • KS D ISO 17053:2021 Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas
  • KS I ISO 4224-2006(2016) Ambient air-Determination of carbon monoxide-Non-dispersive infrared spectrometry method
  • KS D ISO 22963-2010(2020) Titanium and titanium alloys-Determination of oxygen-Infrared method after fusion under inert gas
  • KS I ISO 4224:2021 Ambient air — Determination of carbon monoxide —Non-dispersive infrared spectrometric method
  • KS H ISO 8454:2009 Cigarettes-Determination of carbon monoxide in the vapour phase of cigarette smoke-NDIR method
  • KS M ISO 11046:2005 Soil quality-Determination of mineral oil content-Method by infrared spectrometry and gas chromatographic method
  • KS M ISO 11046:2006 Soil quality-Determination of mineral oil content-Method by infrared spectrometry and gas chromatographic method
  • KS D ISO 22963:2010 Titanium and titanium alloys-Determination of oxygen-Infrared method after fusion under inert gas
  • KS M ISO 15106-2:2008 Plastics-Film and sheeting-Determination of water vapour transmission rate-Part 2:Infrared detection sensor method
  • KS M ISO 15106-2-2008(2018) Plastics-Film and sheeting-Determination of water vapour transmission rate-Part 2:Infrared detection sensor method

Taiwan Provincial Standard of the People's Republic of China, Infrared gas pool

Danish Standards Foundation, Infrared gas pool

  • DS/EN 61920:2004 Infrared free air applications
  • DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • DS/ISO 23506:2021 Workplace air – Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier – Transform infrared spectroscopy
  • DS/EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method

German Institute for Standardization, Infrared gas pool

  • DIN EN 61920:2004-07 Infrared free air applications (IEC 61920:2004); German version EN 61920:2004 / Note: DIN EN 61920 (1999-02) remains valid alongside this standard until 2007-03-01.
  • DIN EN 61920:2004 Infrared free air applications (IEC 61920:2004); German version EN 61920:2004
  • DIN ISO 8454:2012 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method (ISO 8454:2007 + Amd.1:2009)
  • DIN EN 14626:2022-11 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German and English version prEN 14626:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14626 (201...
  • DIN EN 14626:2012-12 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012 / Note: To be replaced by DIN EN 14626 (2022-11).
  • DIN CEN/TS 17337:2019-08*DIN SPEC 33981:2019-08 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy; German version CEN/TS 17337:2019
  • DIN EN 13385:2002 Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at the time of filling; German version EN 13385:2002
  • DIN EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003); German version EN ISO 15106-2:2005
  • DIN ISO 8454:2021 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method (ISO 8454:2007 + Amd.1:2009 + Amd.2:2019)
  • DIN EN ISO 15106-2:2005-05 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003); German version EN ISO 15106-2:2005

Group Standards of the People's Republic of China, Infrared gas pool

  • T/HIS 002-2022 Silicon-based infrared gas sensor
  • T/HIS 013-2022 Pyroelectric infrared gas sensor
  • T/CSTE 0007-2020 Determination of Trace Carbon Monoxide in Hydrogen Fuel - The Method of Mid-infrared Laser Spectroscopy for PEMFC
  • T/CATSI 02012-2022 Infrared thermal imaging detection method for fiber-wound composite gas cylinder
  • T/CAME 40-2021 Helicobacter pylori 13C-urea breath test with infrared spectroscopy
  • T/CSEE 0031-2017 Infrared imaging field test method for sulfur hexafluoride gas leakage of electrical equipment
  • T/CIECCPA 004-2022 Technical specification for infrared radiation emergency heating by gas catalytic combustion
  • T/SCQJNY 0002-2020 Infrared communication technical requirements for vehicle gas dispensers and storage devices
  • T/CEC 356-2020 General technical requirements for sulfur hexafluoride infrared leak detector for electrical equipment
  • T/NXCL 023-2023 Determination of hydrogen and nitrogen in Beryllium— Inert gas fusion infrared absorption/ thermal conductivity method
  • T/CQEEMA 3-2021 Stationary sources emission —Determination of hydrogen chloride—Fourier transform infrared spectrophotometry
  • T/CEC 514-2021 72.5kV~252kV gas insulated metal-enclosed switchgear internal overheating infrared detection technical specification
  • T/CIC 401-2021 High temperature non-dispersive infrared absorption method for detection of inorganic harmful gas factors in waste gas from fixed pollution sources in metallurgical industry
  • T/CSTM 00254-2020 The pyrolysis products of polycarbosilane–Determination of oxygen by the pulse heating insert gas fusion-infra-red absorption method

ES-UNE, Infrared gas pool

  • UNE-EN 61920:2004 Infrared free air applications (Endorsed by AENOR in July of 2004.)

Canadian Standards Association/American National Standards , Infrared gas pool

Professional Standard - Machinery, Infrared gas pool

Canadian Standards Association (CSA), Infrared gas pool

Japanese Industrial Standards Committee (JISC), Infrared gas pool

  • JIS K 0151:1983 Non-dispersive infrared gas analyzer
  • JIS T 0601-2-203:2005 Medical electrical equipment -- Particular requirements for the safety of infrared therapy equipment
  • JIS G 1239:2014 Iron and steel -- Determination of oxygen -- Infrared absorption method after fusion under inert gas
  • JIS C 9335-2-27:2005 Household and similar electrical appliances -- Safety -- Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
  • JIS T 0601-2-203:2015 Medical electrical equipment -- Part 2-203: Particular requirements for the basic safety and essential performance of infrared therapy equipment

British Standards Institution (BSI), Infrared gas pool

  • BS EN 61920:2004 Infrared free air applications
  • BS 5849:1980 Method of expression of performance of air quality infra-red analysers
  • PD ISO/TS 22491:2019 Water pipe tobacco. Determination of carbon monoxide in the vapour phase of water pipe tobacco smoke. NDIR method
  • BS ISO 21214:2006 Intelligent transport systems - Continuous air interface, long and medium range (CALM) - Infra-red systems
  • BS ISO 22963:2008 Titanium and titanium alloys - Determination of oxygen - Infrared method after fusion under inert gas
  • BS ISO 17053:2005 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas
  • BS 4314-1:1968 Specification for apparatus for physical methods of gas analysis - Infra-red gas analysers for industrial use
  • BS ISO 8454:2007+A2:2019 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke. NDIR method
  • BS EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Infrared detection sensor method
  • BS DD 220:1994 Soil quality - Determination of mineral oil content - Method by infrared spectrometry and gas chromatographic method
  • 20/30381924 DC BS ISO 23506. Workplace Air. Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier. Transform Infrared Spectroscopy
  • BS ISO 23506:2021 Workplace air. Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier. Transform infrared spectroscopy
  • BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • BS ISO 19087:2018 Workplace air. Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
  • BS EN 13385:2002 Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling
  • DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
  • BS EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • 22/30450999 DC BS EN 14626. Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • 16/30287218 DC BS ISO 19021. Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • BS ISO 22947:2019 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke with an intense smoking regime. NDIR method
  • BS EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Infrared method after fusion under inert gas
  • BS EN IEC 80601-2-71:2018 Medical electrical equipment. Particular requirements for the basic safety and essential performance of functional near-infrared spectroscopy (NIRS) equipment
  • BS ISO 19742:2018 Optics and photonics. Optical materials and components. Test method for bubbles and inclusions in infrared optical materials

Lithuanian Standards Office , Infrared gas pool

  • LST EN 61920-2004 Infrared free air applications (IEC 61920:2004)
  • LST ISO 4224:2001 Ambient air. Determination of carbon monoxide. Non-dispersive infrared spectrometry method
  • LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • LST EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared gas pool

  • GB/T 25929-2010 Specification of infrared gas analyzers
  • GB/T 25930-2010 Test method of infrared gas analyzers
  • GB/T 23356-2009 Cigarettes.Determination of carbon monoxide in the vapour phase of cigarette smoke.NDIR method
  • GB/T 9801-1988 Air quality--Determination of carbon monoxide--Non-disperisive infrared spectrometry
  • GB/T 32888-2016 Screening Infrared Spectrometry of Organotins in Electronic and Electrical Products
  • GB/T 223.82-2018 Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas
  • GB/T 8704.1-2009 Ferrovanadium-Determination of carbon content-The infrared absorption method and the gasometric method
  • GB/T 28706-2012 Non-destructive testing.Test method for mechanical and electrical equipment with infrared thermography
  • GB/T 30741-2014 Determination of total sulfur in ocean atmospheric dry deposition.Nondispersive infrared absorption spectrometry
  • GB/T 30742-2014 Determination of total carbon in ocean atmospheric dry deposition.Nondispersive infrared absorption spectrometry
  • GB/T 31355-2014 Determination of water vapor transmission rate through dry packages.Modulated infrared sensor
  • GB/T 11261-2006 Steel and lron - Determination of oxygen content - The pulse heating inert gas fusion-infra-red absorption method
  • GB/T 26253-2010 Determination of water vapour transmission rate for plastics-film and sheeting.Infrared detection sensor method
  • GB/T 8704.1-1997 Methods for chemical analysis of ferrovandium. The infrared absorption method and the gasometric method for the determination of carbon content
  • GB/T 4325.25-2013 Methods for chemical analysis of molybdenum.Part 25:Determination of hydrogen content.Inert gas fusion infrared absorption method/thermal conductivity method
  • GB/T 11261-1989 Methods for chemical analysis of high carbon chromium bearing steel--The pulse heating inert gas fusion-infra-red absorption method for the determination of oxygen content
  • GB/T 4324.25-2012 Methods for chemical analysis of tungsten.Part 25:Determination of oxygen content.Pulse heating inert gas fusion -infrared absorption method
  • GB/T 4325.23-2013 Methods for chemical analysis of molybdenum.Part 23:Determination of oxygen and nitrogen contents.Inert gas fusion-infrared absorption and thermal conductivity method

国家能源局, Infrared gas pool

  • SY/T 7657.4-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 4: Determination of hydrogen content by fuel cell method
  • SY/T 7657.1-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 1: General principles
  • SY/T 7657.3-2021 Part 3 of the combined photoacoustic spectroscopy-infrared spectroscopy-fuel cell determination method for natural gas: Determination of the content of ethane and above alkanes, carbon dioxide and carbon monoxide by infrared spectroscopy
  • NB/T 10162-2019 General technical conditions for infrared gas analyzers used in coal mines
  • SY/T 7657.2-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 2: Determination of methane content by photoacoustic spectroscopy
  • SY/T 6679.4-2016 Comprehensive logging tool calibration method Part 4: Infrared gas analyzer

Professional Standard - Electron, Infrared gas pool

  • SJ/Z 9126-1987 Presentation for performances of air quality infra-red analyzers

IN-BIS, Infrared gas pool

未注明发布机构, Infrared gas pool

  • BS 5849:1980(1999)*IEC 528:1975 Method of Expression of performance of air quality infra - red analysers [ IEC title : Expression of performance of air quality infra - red analyzers ]
  • DIN EN 14626:2005 Air quality — measuring method for determining the concentration of carbon monoxide using non-dispersive infrared photometry
  • DIN EN 13410 Berichtigung 1:2003 Heating systems with gas infrared heaters – ventilation of commercial and industrial buildings; German version EN 13410:2001

YU-JUS, Infrared gas pool

  • JUS H.F8.232-1986 Gases. Determination of hydrocarbons content. Infrared spectrophotometric method
  • JUS H.F8.153-1986 Gases. Determination of carbon dioxid content. Infrared spectrophotometric method

American National Standards Institute (ANSI), Infrared gas pool

CENELEC - European Committee for Electrotechnical Standardization, Infrared gas pool

Association of German Mechanical Engineers, Infrared gas pool

  • VDI 2460 Blatt 3-1981 Gaseous emission measurement; infrared spectrometric determination of cresol
  • VDI 2460 Blatt 2-1974 Gaseous emission measurement; infrared spectrometric determination of dimethyl formamide
  • VDI 2460 Blatt 1-1996 Measurement of gaseous emissions - Infrared spectrometric determination of organic compounds - General principles

Professional Standard - Meteorology, Infrared gas pool

  • QX/T 273-2015 Monitoring method for atmospheric carbon monoxide concentration.Gas filter correlation
  • QX/T 67-2007 Determination of concentration of carbon dioxide in flask samples from background atmosphere.non-dispersive infrared absorption method

HU-MSZT, Infrared gas pool

Society of Automotive Engineers (SAE), Infrared gas pool

  • SAE AS6129-2012 AS6129: Interface Standard, Airborne EO/IR Systems, Electrical
  • SAE ARP5623A-2023 Mobile Digital Infrared Pavement Surface, Ambient Air and Dew Point Temperature Sensor System
  • SAE AIR5917-2020 Procedure for Measurement of Gaseous Emissions from Aircraft Gas Turbine Engines Using Fourier Transform Infrared Analysis

Professional Standard - Tobacco, Infrared gas pool

  • YC/T 30-1996 Cigarettes--Determination of carbon monoxide in the gas phase of smoke--NDIR method
  • YC/T 466-2013 Cigars.Determination of carbon monoxide in mainstream smoke of cigars.Non-dispersive infrared method

中国气象局, Infrared gas pool

  • QX/T 545-2020 Calibration method of infrared radiation of Fengyun series polar-orbiting meteorological satellite visible light infrared scanning radiometer on-orbiting satellite
  • QX/T 388-2017 Technical specifications for cross-calibration of infrared bands for geostationary meteorological satellites

中华人民共和国环境保护部, Infrared gas pool

  • GB 9801-1988 Air quality--Determination of carbon monoxide--Non- disperisive infrared spectrometry

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Infrared gas pool

  • AHRI 1330-2014 Performance Rating for Radiant Output of Gas Fired Infrared Heaters

Professional Standard - Electricity, Infrared gas pool

  • DL/T 2224-2021 Infrared imaging field test method for sulfur hexafluoride gas leakage of electrical equipment
  • DL/T 919-2005 Determination of mineral oil content in sulphur hexafluoride by infrared spectrum method

International Organization for Standardization (ISO), Infrared gas pool

  • ISO/CD 24476 Steel and iron- determination of Oxygen-Infrared method after fusion under inert gas(Routine Method)
  • ISO 4224:2000 Ambient air - Determination of carbon monoxide - Non-dispersive infrared spectrometry method
  • ISO 17053:2005 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas
  • ISO 21214:2006 Intelligent transport systems - Continuous air interface, long and medium range (CALM) - Infra-red systems
  • ISO 22963:2008 Titanium and titanium alloys - Determination of oxygen - Infrared method after fusion under inert gas
  • ISO/DIS 24476 Steel – Determination of oxygen – Infrared absorption method after fusion under inert gas (Routine method)
  • ISO 8454:2007 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method
  • ISO/TR 11046:1994 Soil quality - Determination of mineral oil content - Method by infrared spectrometry and gas chromatographic method
  • ISO/TS 19021:2018 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
  • ISO 15106-2:2003 Plastics; Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method
  • ISO 19087:2018 Workplace air - Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
  • ISO 23506:2021 Workplace air - Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier - Transform infrared spectroscopy
  • ISO 19742:2018 Optics and photonics - Optical materials and components - Test method for bubbles and inclusions in infrared optical materials
  • ISO/DIS 19702:2023 Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy

RU-GOST R, Infrared gas pool

  • GOST R ISO 4224-2007 Ambient air. Determination of carbon monoxide. Non-dispersive infrared spectrometry method
  • GOST 25696-1983 Gas infrared burners. General technical requirements and acceptance rules
  • GOST 31630-2012 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke using nondespersive infrared (NDIR) analyzer
  • GOST R ISO 19087-2021 Workplace air. Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
  • GOST R 51358-2008 Cigarettes. Determination of carbon monoxide content in the vapour phase of cigarette smoke using nondespersive infrared (NDIR) analyzer
  • GOST R 51358-1999 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke (NDIR method)
  • GOST 8.617-2013 State system for ensuring the traceability of measurements. Nondispersive infrared (NDIR) gas analyzers for determination of carbon monoxide in the vapour phase of cigarette smoke. The method of verification

AENOR, Infrared gas pool

  • UNE 38864:2011 Titanium and titanium alloys. Determination of oxygen. Infrared method after fusion under inert gas.
  • UNE 77252:2003 Ambient air. Determination of carbon monoxide. Non-dispersive infrared spectrometry method.
  • UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • UNE 81550:2017 Workplace exposure. Determination of crystalline free silica (respirable fractions) in the air. Method by infrared spectrometry
  • UNE-EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003)

American Society for Testing and Materials (ASTM), Infrared gas pool

  • ASTM E1982-98(2021) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1642-00(2005) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1642-00 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1982-98 Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1982-98(2002) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1642-00(2010) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1642-00(2016) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1934-99a(2005)e1 Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1934-99a Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1934-99a(2014) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1934-99a(2018) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1865-97(2013) Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1865-97(2002) Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1865-97 Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1865-97(2007) Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM D2144-07 Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM D2144-07(2013) Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM E1982-98(2013) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1865-97(2021) Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1934-99a(2010) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1982-98(2007) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM D3162-21 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM F372-99 Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique
  • ASTM F372-99(2003) Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique
  • ASTM D3162-12(2020) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D3162-12 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM E1447-05 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
  • ASTM D6348-98 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM F2476-13 Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate 40;CO2TR41; Through Barrier Materials Using An Infrared Detector
  • ASTM D6348-12 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D7653-18 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6348-12(2020) Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D3162-94(2000)e1 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D3162-94(2005) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D7948-20 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM D7948-14 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM D7948-14e1 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM F1249-01 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM F1249-06(2011) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM D7653-10 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy

National Metrological Verification Regulations of the People's Republic of China, Infrared gas pool

  • JJG 635-2011 Verification Regulation of Carbon Monoxide and Carbon Dioxide Infrared Gas Analyzer
  • JJG 635-1999 Verification Regulation of Monooxide and Carbon Diaxide Infrared Gas Analyzer

KR-KS, Infrared gas pool

  • KS D ISO 17053-2021 Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas
  • KS I ISO 4224-2021 Ambient air — Determination of carbon monoxide —Non-dispersive infrared spectrometric method
  • KS M ISO 11046-2005 Soil quality-Determination of mineral oil content-Method by infrared spectrometry and gas chromatographic method

Professional Standard - Environmental Protection, Infrared gas pool

  • HJ 965-2018 Non-dispersive infrared method for automatic determination of carbon monoxide in ambient air
  • HJ 920-2017 Emergency Monitoring of Inorganic Harmful Gases in Ambient Air with Portable Fourier Transform Infrared Instrument
  • HJ 692-2014 Stationary source emission.Determination of nitrogen oxides.Non-dispersive infrared absorption method
  • HJ/T 44-1999 Stationary source emission.Determination of carbon monoxide.Non-dispersive infrared absorption method
  • HJ 870-2017 Stationary source emission - Determination of carbon dioxide - Non-dispersive infrared absorption method
  • HJ 629-2011 Stationary source emission.dtermination of sulphur dioxide.Non-dispersive infrared absorption method
  • HJ 1077-2019 Infrared Spectrophotometric Method for Determination of Oil Fume and Oil Mist in Exhaust Gases from Stationary Pollution Sources
  • HJ 919-2017 Determination of Volatile Organic Compounds in Ambient Air by Portable Fourier Transform Infrared Apparatus
  • HJ 1240-2021 Determination of gaseous pollutants (SO2, NO, NO2, CO, CO2) in exhaust gas from stationary pollution sources Portable Fourier transform infrared spectroscopy
  • HJ 1011-2018 Technical requirements and detection methods of portable Fourier transform infrared monitor for volatile organic compounds in ambient air and exhaust gas

国家市场监督管理总局、中国国家标准化管理委员会, Infrared gas pool

  • GB/T 38976-2020 Test method for the oxygen concentration in silicon materials—Inert gas fusion infrared detection method
  • GB/T 40561-2021 Photovoltaic silicon material—Determination of oxygen—Pulse heating inert gas fusion infrared absorption method
  • GB/T 40566-2021 Granular polysilicon produced by fluidized bed method—Determination of hydrogen—Pulse heating inert gas fusion infrared absorption method

SE-SIS, Infrared gas pool

  • SIS SS IEC 528:1984 Electronic measuring equipment - Expression ofperformance of air quality infra-red analyzers

VN-TCVN, Infrared gas pool

  • TCVN 7725-2007 Ambient air.Determination of carbon monoxide.Non-dispersive infrared spectrometric method
  • TCVN 7369-2004 Soils quality.Determination of mineral oil content.Method by infrared spectrometry and gas chromatographic method
  • TCVN 6678-2000 Cigarettes.Determination of carbon monooxide in the vapour phase of cigarettes smoke.NDIR method

海关总署, Infrared gas pool

  • SN/T 5351-2021 Determination of hydrogen in aluminum and aluminum alloys by inert gas melting-infrared absorption method

工业和信息化部, Infrared gas pool

  • YB/T 4738-2019 Determination of oxygen content of calcium silicon alloy by inert gas fusion infrared absorption method
  • YB/T 4908.4-2021 Determination of hydrogen content in vanadium-aluminum alloys by inert gas fusion infrared absorption method or thermal conductivity method
  • YS/T 540.7-2018 Methods for chemical analysis of vanadium Part 7: Determination of oxygen content Inert gas fusion infrared absorption method
  • YB/T 4908.6-2021 Determination of oxygen and nitrogen content in vanadium-aluminum alloys by inert gas fusion infrared absorption method and thermal conductivity method
  • YS/T 1550.5-2022 Methods for chemical analysis of beryllium alloys Part 5: Determination of oxygen content Inert gas fusion infrared absorption method

European Committee for Standardization (CEN), Infrared gas pool

  • EN 13385:2002 Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling
  • EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • CEN/TS 17337:2019 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy
  • EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method

National Metrological Technical Specifications of the People's Republic of China, Infrared gas pool

  • JJF 1523-2015 Program of Pattern Evaluation of Carbon Monoxide and Carbon Dioxide Infrared Gas Analyzers

Professional Standard - Ferrous Metallurgy, Infrared gas pool

  • YB/T 4305-2012 Steel, iron and alloy.Determination of oxygen content.Infrared method after fusion under inert gas
  • YB/T 190.7-2014 Continuous casting mold powder.The determination of total carbon content.The gas volumetric method after combustion and the infrared absorption method
  • YB/T 190.6-2014 Continuous casting mold powder.The determination of dissociation carbon content.The gas volumetric method after combustion and the infrared absorption method
  • YB/T 190.7-2001 Methods for chemical analysis of continuous casting mold powder The gas-volumetric method after combustion and the infrared absorption method for the determination of carbon content
  • YB/T 190.6-2001 Methods for chemical analysis of continuous casting mold powder The gas-volumetric method after combustion and the infrared absorption method for the determination of dissociation carbon content

Hebei Provincial Standard of the People's Republic of China, Infrared gas pool

  • DB13/T 5029-2019 Determination of Methanol Content in Alcohol-Based Fuels - Gas Chromatography - Infrared Spectroscopy

FI-SFS, Infrared gas pool

Aerospace Industries Association/ANSI Aerospace Standards, Infrared gas pool

  • AIA/NAS NAS 1744-1983 Splice, Conductor, Solder Style, Hot Air or Infrared, Shrinkable, Insulated, Immersion Resistant (Rev. 3)

ZA-SANS, Infrared gas pool

  • SANS 2220-1-5:2007 Electrical security systems Part 1-5: Intruder alarm systems - Passive infra-red detectors
  • SANS 2220-1-2:2006 Electrical security systems Part 1.2: Intruder alarm systems: Infra-red beam interruption detectors
  • SANS 60335-2-27:2007 Household and similar electrical appliances - Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

Indonesia Standards, Infrared gas pool

  • SNI 7119.10-2011 Ambient atmospheres - Part 10: Test methods of carbon monoxide (CO) by method of Non-dispersive Infra Red (NDIR)

Jiangxi Provincial Standard of the People's Republic of China, Infrared gas pool

  • DB36/T 1387-2021 Portable Fourier Transform Infrared Absorption Method for Determination of Ammonia and Hydrogen Chloride in Stationary Pollution Source Waste Gas

Sichuan Provincial Standard of the People's Republic of China, Infrared gas pool

  • DB51/T 2041-2015 Determination of hydrogen content in vanadium aluminum alloys Inert gas fusion - thermal conductivity or infrared absorption method
  • DB51/T 2043-2015 Determination of Oxygen and Nitrogen Content in Vanadium Aluminum Alloy Inert Gas Fusion-Infrared Absorption Method and Thermal Conductivity Method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Infrared gas pool

  • GB/T 4702.17-2016 Chromium metal─Determination of oxygen, nitrogen and hydrogen content─Inert gas fusion thermal infrared detection method and conductivity method
  • GB/T 13747.21-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 21:Determination of hydrogen content—Inert gas fusion-infrared absorption or thermal conductivity method

Professional Standard - Nuclear Industry, Infrared gas pool

  • EJ/T 20171-2018 Determination of Oxygen Content in Uranium Metal and Uranium Alloys Pulse Heating Inert Gas Fusion-Infrared Absorption Method

CEN - European Committee for Standardization, Infrared gas pool

  • PD CEN/TS 17337:2019 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy

Standard Association of Australia (SAA), Infrared gas pool

  • AS/NZS 60335.2.27:2004 Household and similar electrical appliances - Safety - Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

PL-PKN, Infrared gas pool

  • PN Z04108-04-1988 Air purity protection Tests for oils Determination of li?uid phase of oil in work places by infrared absorption spectrophotometry

Professional Standard - Non-ferrous Metal, Infrared gas pool

  • YS/T 1075.7-2015 Methods for chemical analysis of vanadium-aluminium and molybdenum-aluminium master alloys.Part 7:Determination of oxygen content.Inert gas fusion-infrared method
  • YS/T 861.2-2013 Methods for chemical analysis of niobium-titanium alloy.Part 2:Determination of oxygen and nitrogen content.Inert gas fusion infrared/thermal conductivity method

NL-NEN, Infrared gas pool

  • NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry

U.S. Air Force, Infrared gas pool

Professional Standard - Commodity Inspection, Infrared gas pool

  • SN/T 2592.2-2010 Determination of organotin compounds in electrical and electronic equipment.Part 2:Screening by Fourier transform infrared spectrometry
  • SN/T 2003.2-2006 Determination of polybrominatedbiphenyls and polybrominatedbiphenyl ether in electrical and electronic equipments - Part 2: Qualitative screening by infra-red spectrometric method




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved