ZH
RU
ES

Capacity and discharge capacity

Capacity and discharge capacity, Total:499 items.

In the international standard classification, Capacity and discharge capacity involves: Capacitors, Bottles. Pots. Jars, Barrels. Drums. Canisters, Electromagnetic compatibility (EMC), Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Fluid storage devices, Semiconductor devices, Cinematography, Air quality, Internal combustion engines for road vehicles, Valves, Transport, Radiation measurements, Acoustics and acoustic measurements, Galvanic cells and batteries, Installations in buildings, Nuclear energy engineering, Electrical accessories, Powder metallurgy, Non-ferrous metals, Resistors, Rectifiers. Convertors. Stabilized power supply, Aerospace electric equipment and systems, Electronic tubes, Compressors and pneumatic machines, Telecommunication systems, Vocabularies, MATERIALS HANDLING EQUIPMENT, Electromechanical components for electronic and telecommunications equipment, Electrical and electronic testing, Road vehicle systems, Integrated circuits. Microelectronics, Materials for aerospace construction, Commercial vehicles, Passenger cars. Caravans and light trailers, Lamps and related equipment, Industrial automation systems, Applications of information technology, Electrical engineering in general, Power transmission and distribution networks, Analytical chemistry, Aerospace fluid systems and components, Wood, sawlogs and sawn timber, Refrigerating technology, Telecommunication terminal equipment, Environmental protection, Office machines, Small craft, Jewellery, Thermodynamics and temperature measurements, Non-destructive testing, Rotating machinery, Insulating materials, Electrical wires and cables, Earth-moving machinery, Electric road vehicles, Solar energy engineering, Insulation, On-board equipment and instruments, Audio, video and audiovisual engineering, Power stations in general, Software development and system documentation, Labour. Employment, Equipment for petroleum and natural gas industries, Wastes, Optoelectronics. Laser equipment, Information technology (IT) in general, Agricultural machines, implements and equipment, Medical equipment, Organic chemicals, Measurement of volume, mass, density, viscosity, Quantities and units.


German Institute for Standardization, Capacity and discharge capacity

  • DIN 41328-4:1974 Measurement of discharge capacity of electrolytic capacitors
  • DIN 41328-4:1974-06 Measurement of discharge capacity of electrolytic capacitors
  • DIN EN 13972:2003 Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity; German version EN 13972:2002
  • DIN EN 13648-3:2003 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge; Capacity and sizing; German version EN 13648-3:2002
  • DIN 40734:1999 Lead acid batteries - Stationary vented cells with positive grid plates - Cells in plastic containers; rated capacities, main dimensions, weights
  • DIN EN 27842:1991-11 Automatic steam traps; determination of discharge capacity; test methods (ISO 7842:1988); german version EN 27842:1991 / Note: To be replaced by DIN EN ISO 5117 (2022-04).
  • DIN 41328-1:1968-01 Measurement of the transfer impedance of electrolytic capacitors
  • DIN 40771-2:2013 Vented nickel-cadmium-accumulators.Part 2: Cells in plastic containers with fibre structure plates.Rated capacities.Main dimensions
  • DIN 40737-3:1999 Lead acid batteries - Stationary batteries with positive tubular plates - Part 3: Vented batteries in plastic-monobloc-containers; rated capacities, main dimensions, weights
  • DIN EN 62132-3:2008 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 3: Bulk current injection (BCI) method (IEC 62132-3:2007); German version EN 62132-3:2007
  • DIN 40736-1:1992 Lead acid batteries; stationary cells with positive tubular plates; cells in plastic-containers; rated capacities, main dimensions, weights
  • DIN VDE 0560-3:1968 Rules for capacitors; part 3: Rules for capacitors for coupling, voltage measurement and overvoltage protection
  • DIN 40771-1:1981 Nickel-cadmium-accumulators; cells with pocket-type plates, cells in steel and plastic containers; rated capacities, main dimensions
  • DIN 40736-2:1992 Lead acid batteries; stationary cells with positive tubular plates; cells in hard-rubber containers; rated capacities, main dimensions, weights
  • DIN 29571-3:1990-10 Aerospace; electrical equipment; analysis of load and power source capacity
  • DIN 40771-2:1981 Nickel-cadmium-accumulators; cells with pocket-type plates, cells in steel and plastic containers; electrical characteristics; discharge duration
  • DIN 40763-1:1988 Nickel-cadmium-batteries; cells with fibre structured plates; cells in plastic containers; nominal capacities, main dimensions
  • DIN 41328-1:1968 Measurement of the transfer impedance of electrolytic capacitors
  • DIN 30737:2003-03 Waste containers - Mobile discharge system containers with hinged lid with capacities 2,5 m<(hoch)3> and 5 m<(hoch)3> for lifting devices with lid opener device
  • DIN 40771-1:2013 Vented nickel-cadmium-accumulators.Part 1: Cells in plastic containers with pocket type plates.Rated capacities.Main dimensions
  • DIN EN 13008:2000 Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l; German version EN 13008:1999
  • DIN CEN/TR 17911:2023-06 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content; German version CEN/TR 17911:2023
  • DIN 1926-3:1974 Platform scales, railway scales, capacity, platform sizes
  • DIN 5485:1986 Principles of terminology for physical quantities; composition of terms with adjectives and substantives
  • DIN VDE 0276-1000:1995 Power cables - Part 1000: Current-carrying capacity, general, conversion factors
  • DIN 40736-2:1992-06 Lead acid batteries; stationary cells with positive tubular plates; cells in hard-rubber containers; rated capacities, main dimensions, weights

International Electrotechnical Commission (IEC), Capacity and discharge capacity

  • IEC White Paper RE-EES:2012 Grid integration of large-capacity Renewable Energy sources and use of large-capacity Electrical Energy Storage
  • IEC TR 63396:2021 Noise measurement method on power capacitors
  • IEC 61000-4-2:2001 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques; Electrostatic discharge immunity test
  • IEC 60100:1962 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
  • IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measuring techniques - Electrostatic discharge immunity test
  • IEC 61000-4-30:2008 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods
  • IEC 60801-2:1991 Electromagnetic compatibility for industrial-process measurement and control equipment; part 2: electrostatic discharge requirements
  • IEC 60100:1962/AMD1:1969 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
  • IEC 61000-4-30:2015 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
  • IEC 61000-4-30:2015+AMD1:2021 CSV Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
  • IEC 61000-4-30:2021 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
  • IEC 61000-4-22:2010 Electromagnetic compability (EMC) - Part 4-22: Testing and measurement techniques - Radiated emissions and immunity measurements in fully anechoic rooms (FARs)
  • IEC 61000-4-30:2003 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques; Power quality measurement methods
  • IEC 62132-3:2007 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 3: Bulk current injection (BCI) method
  • IEC 61000-4-30:2015/AMD1:2021 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

RU-GOST R, Capacity and discharge capacity

  • GOST 28885-1990 Capacitors. Methods of measurements and tests
  • GOST 8.255-2003 State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure
  • GOST 8.255-1977 State system for ensuring the uniformity of measurements. Capasitance measures. Methods and means of calibration
  • GOST 18986.18-1973 Variable capacitance diodes. Method of measuring temperature coefficient of capacitance
  • GOST 20398.5-1974 Field-effect transistors. Input transfer and output capacitance measurement technique
  • GOST 8.013-1972 State system for ensuring the uniformity of measurements. Condenser personnel dosimeters. Verification. Methods and means
  • GOST 8.153-1975 State system of ensuring the uniformity of measurement. Measuring condenser microphones. Methods and means of verification
  • GOST 26192-1984 Fixed capacitors. Marking coloured codes
  • GOST R 51525-1999 Electromagnetic compatibility of technical equipment. Immunity of measuring relays and protection equipment to electrostatic discharges. Requirement and test methods
  • GOST 30346-1996 Varistors. Method of measuring capacitance
  • GOST 18986.19-1973 Variable capacitance diodes. Method for measuring the quality factor
  • GOST 18604.3-1980 Transistors bipolar. Methods for measuring collector and emitter capacitances
  • GOST R 52231-2004 External noise of motor vehicles. Permissible levels and methods of measurement
  • GOST 30804.4.30-2013 Electric energy. Electromagnetic compatibility of technical equipment. Power quality measurement methods
  • GOST 6746-1994 Measures of electrical capacitance. General technical requirements
  • GOST 6746-1975 Capacitance measures. General specifications
  • GOST 21107.12-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for spark discharges
  • GOST R 51318.14.1-2006 Electromagnetic compatibility of technical equipment. Household appliances, electric tools and similar apparatus. Radio disturbance. Limits and methods of measurements
  • GOST 22091.13-1984 X-ray devices. The method of measuring of grid-cathode capacity
  • GOST 16747-1980 Condenser paper. Method for determining number of current-conducting insertions
  • GOST R 52506-2005 Electromagnetic compatibility of technical equipment. Lifts, escalators and moving walks. Emission
  • GOST R 51318.16.1.1-2007 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Measuring apparatus
  • GOST 20074-1983 Electrical equipment and installations. Method measurements of partial discharge characteristics
  • GOST R 51318.16.1.2-2007 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-2. Radio disturbance and immunity measuring apparatus and methods. Conducted radio disturbance measuring and imm
  • GOST R 51097-1997 Electromagnetic compatibility of technical equipment. Radiofrequency disturbances from insulator sets and line fittings. Limits and measuring methods
  • GOST 24606.5-1983 Switches, hardware and electric connectors. Method of capacitance measuring
  • GOST 19.401-1978 Unified system for program documentation. Text of program. Requirements to contents and form of presentation
  • GOST R 51318.13-2006 Electromagnetic compatibility of technical equipment. Sound and television broadcast receivers and associated equipment. Radio disturbance. Limits and methods of measurement
  • GOST R 51318.22-2006 Electromagnetic compatibility of technical equipment. Information technology equipment. Man-made radio disturbance. Limits and methods of measurement
  • GOST 24613.1-1981 Optoelectronic integrated microcircuits and optocouplers. Method for measuring of input-to-output capacitance
  • GOST R 51963-2002 Standard radionuclide solutions and standard ionizing radiation radionuclide sources. Verification certificate contents
  • GOST R 53538-2009 High-capacity cables with copper thread for digital circuit. General technical requirements
  • GOST R 51318.16.1.3-2007 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-3. Radio disturbance and immunity measuring apparatus. Disturbance power measuring apparatus
  • GOST R 51318.11-2006 Electromagnetic compatibility of technical equipment. Industrial, scientific, medical and domestic (ISMD) high-frequency equipment. Radio disturbance. Limits and methods of measurement
  • GOST R 51318.16.2.4-2010 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-4. Methods of measurement of disturbances and immunity. Immunity parameters measurement
  • GOST R 51522-1999 Electromagnetic compatibilyty of technical equipment. Electrical equipment for measurement, control and laboratory use. Requirements and test methods
  • GOST 21107.10-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge thyratrons and gas-filled rectifiers
  • GOST 30805.16.4.2-2013 Electromagnetic compatibility of technical equipment. Uncertainty in electromagnetic compatibility measurements

Taiwan Provincial Standard of the People's Republic of China, Capacity and discharge capacity

  • CNS 14676-2-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 2 : Electrostatic discharge immunity test
  • CNS 14676.2-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 2 : Electrostatic discharge immunity test
  • CNS 14676-1-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 1 : Overview
  • CNS 14676.1-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 1 : Overview
  • CNS 9228-1987 Method of Test for Dry Reed Switches (Capacitance)
  • CNS 14676.5-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 5 : Surge immunity test
  • CNS 14676-5-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 5 : Surge immunity test
  • CNS 14386-12-2000 Capacity test procedure for batteries of electric motorcycles
  • CNS 14386.12-2000 Capacity test procedure for batteries of electric motorcycles
  • CNS 13597-1995 Office Machines-Line and Character Capacity of Address Masters
  • CNS 14676-3-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Prat 3 : Radiated ,radio-frequency ,electromagnetic field immunity test
  • CNS 14676.8-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 8: Power frequency magnetic field immunity test
  • CNS 14676-8-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 8: Power frequency magnetic field immunity test
  • CNS 14676.3-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Prat 3 : Radiated ,radio-frequency ,electromagnetic field immunity test
  • CNS 14676-9-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 9: Pulse magnetic field immunity test
  • CNS 14676.9-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 9: Pulse magnetic field immunity test
  • CNS 14676.4-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Prat 4 : Electrical fast transient/burst immunity test
  • CNS 14676-4-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Prat 4 : Electrical fast transient/burst immunity test
  • CNS 14676.10-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 10: Damped oscillatory magnetic field immunity test
  • CNS 14676-10-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 10: Damped oscillatory magnetic field immunity test
  • CNS 14676.6-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques- Part 6 : Immunity to conducted disturbances,induced by radio-frequency fields
  • CNS 14676-6-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques- Part 6 : Immunity to conducted disturbances,induced by radio-frequency fields

Society of Automotive Engineers (SAE), Capacity and discharge capacity

  • SAE AIR801-1994 Oscillographic Method for Measuring Spark Energy of Capacitor Discharge Ignition Systems
  • SAE J1094-2011 Constant Volume Sampler System for Exhaust Emissions measurement
  • SAE AIR1184A-2007 CAPACITIVE FUEL GAUGING SYSTEM ACCURACIES
  • SAE AIR1184B-2021 Capacitive Fuel Gauging System Accuracies
  • SAE ARP936-1968 CAPACITOR, 10 MFD FOR EMI MEASUREMENTS
  • SAE J1113/13-2015 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13: Immunity to Electrostatic Discharge
  • SAE J1113/13-1997 Electromagnetic Compatibility Measurement Procedure for Vehicle Components Part 13 Immunity to Electrostatic Discharge
  • SAE J1752-1-2006 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits Integrated Circuit EMC Measurement Procedures General and Definition
  • SAE J1113/13-2011 Electromagnetic Compatibility Measurement Procedure for Vehicle Components Part 13 Immunity to Electrostatic Discharge
  • SAE J1113/13-2002 (R) Electromagnetic Compatibility Measurement Procedure for Vehicle Components Part 13: Immunity to Electrostatic Discharge
  • SAE AIR801-1961 (Noncurrent)Oscillographic Method for Measuring Spark Energy of Capacitor Discharge Ignition Systems Reaffirmed Noncurrent June 1994
  • SAE ARP936A-2003 Capacitor, 10 Microfarad for EMI Measurements
  • SAE ARP936B-2013 Capacitor, 10 Microfarad for EMI Measurements
  • SAE ARP936A-1989 Capacitor, 10 Microfarad for EMI Measurements
  • SAE J/ISO 9248-2003 Earth-moving machinery Units for dimensions, performance and capacities, and their measurement accuracies Identical to ISO 9248:1992
  • SAE J1094-1992 Constant Volume Sampler System for Exhaust Emissions Measurement, Information Report June 1992
  • SAE J1752/1-1997 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits-Integrated Circuit Emc Measurement Procedures-General and Definition
  • SAE J1752/1-2006 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits—Integrated Circuit EMC Measurement Procedures—General and Definitions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Capacity and discharge capacity

  • GB/T 13865-1992 Power Capacitor
  • GB/T 17626.2-1998 Electromagnetic compatibility--Testing and measurement techniques--Electrostatic discharge immunity test
  • GB/T 17626.2-2018 Electromagnetic compatibility.Testing and measurement techniques.Electrostatic discharge immunity test
  • GB/T 17626.2-2006 Electromagnetic compatibility Testing and measurement techniques Electrostatic discharge immunity test
  • GB/T 6833.3-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Electrostatic discharge susceptibility test
  • GB/T 28543-2012 Noise measurement of power capacitors
  • GB/T 23365-2023 Lithium cobalt oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
  • GB/T 23365-2009 Electrochemical performance test of lithium cobalt oxide.Test method for specific capacity and charge.discharge efficiency of the first cycle
  • GB/T 25154-2010 Capacitive liquid phase trace moisture meter
  • GB/T 17626.30-2012 Electromagnetic compatibility.Testing and measurement techniques.Power quality measurement methods
  • GB/T 42161-2022 Electrochemical performance test of lithium iron phosphate—Test method for the initial discharge specific capacity and the initial efficiency
  • GB/T 43093-2023 Lithium nickel manganese oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
  • GB/T 7777-2003 Measurement and evaluation of mechanical vibration of displacement compressors
  • GB/T 30962-2014 Identification cards.Integrated circuit cards.High capacity cards
  • GB 10737-1989 Working chemical--General rules for the potentiometric weight titration
  • GB/T 18443.4-2001 Testing method of cryo-insulation pressure vessels leak and outgassing rate measurement
  • GB/T 23366-2009 Electrochemical performance test of lithium cobalt oxide.Test method for discharge plateau capacity ratio and cycle life
  • GB/T 25126-2010 Large capacity cross-electromagnetic four-way reversing valve
  • GB/T 3974-1983 Telephone transmission interference allowances for long-distance high-capacity analogue microwave communication systems
  • GB 3974-1983 Telephone transmission interference allawance for long-distance high-capacity analogue microwave communication systems
  • GB/T 4834-2001 Direct or indirect-reading capacitor-type pocket dosemeters
  • GB/T 10077-1988 Maximum outside size and capacity series for lithium battery
  • GB/T 19483-2016 Requirements and measurement methods of electromagnetic compatibility for cordless telephone
  • GB/T 6833.1-1986 Electromagnetic compatibility test specification for electronic measuring instruments--General
  • GB 19483-2004 Requirements and Measurement methods of electromagnetic compatibility for Cordless telephone
  • GB/T 17832-2008 Silver jewellery alloys.Determination of silver.Volumetic (potentionmetric) method using potassium bromide

HU-MSZT, Capacity and discharge capacity

Professional Standard - Traffic, Capacity and discharge capacity

  • JT/T 7-1994 Ship cargo tank volume measurement and measurement
  • JT/T 7-2008 Measurement and calculation of the capacity of ships liquid cargotank

United States Navy, Capacity and discharge capacity

International Telecommunication Union (ITU), Capacity and discharge capacity

  • ITU-T P.52-1993 Volume Meters - Telephone Transmission Quality - Objective Measuring Apparatus (Study Group XII) 5 pp
  • ITU-T F.64 FRENCH-1993 DETERMINATION OF THE NUMBER OF INTERNATIONAL TELEX CIRCUITS REQUIRED TO CARRY A GIVEN VOLUME OF TRAFFIC
  • ITU-T F.64 SPANISH-1993 DETERMINATION OF THE NUMBER OF INTERNATIONAL TELEX CIRCUITS REQUIRED TO CARRY A GIVEN VOLUME OF TRAFFIC

AT-ON, Capacity and discharge capacity

Professional Standard - Agriculture, Capacity and discharge capacity

  • NY/T 82.3-1988 Container Appearance and Minimum Filling Volume
  • NY 146.3-1988 Juice Determination Method Container Appearance and Minimum Filling Volume

British Standards Institution (BSI), Capacity and discharge capacity

  • BS EN 13648-3:2002 Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing
  • BS EN 13648-3:2002(2008) Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing
  • BS EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test
  • BS ISO 1793:2005 Cinematography - Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) - Dimensions
  • PD IEC TR 63396:2021 Noise measurement method on power capacitors
  • BS EN 61000-4-30:2015+A1:2021 Electromagnetic compatibility (EMC). Testing and measurement techniques. Power quality measurement methods
  • BS EN 61000-4-22:2011 Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs)
  • BS EN 60801-2:1993 Electromagnetic compatibility for industrial-process measurement and control equipment - Electrostatic discharge requirements
  • BS EN 61000-4-2:1995 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test - Basic EMC publication
  • BS EN 60512-22-1:2010 Connectors for electronic equipment. Tests and measurements. Part 22-1: Capacitance tests. Test 22a: Capacitance
  • BS EN 13183-3:2005 Moisture content of a piece of sawn timber - Estimation by capacitance method
  • PD CLC/TR 50485:2010 Electromagnetic compatibility. Emission measurements in fully anechoic chambers
  • BS ISO 21172-1:2015 Gas cylinders. Welded steel pressure drums up to 3 000 litres capacity for the transport of gases. Design and construction. Capacities up to 1 000 litres
  • BS EN 61000-4-30:2009 Electromagnetic compatability (EMC) — Part 4-30: Testing and measurement techniques — Power quality measurement methods
  • BS EN 61000-4-30:2015 Electromagnetic compatibility (EMC). Testing and measurement techniques. Power quality measurement methods
  • BS EN 31427:1994 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide
  • BS AU 88a:1985 Recommendations for ratings for light duty cables for automobile use
  • BS EN 60255-26:2010 Measuring relays and protection equipment. Electromagnetic compatibility requirements
  • BS EN 62490-2:2010 ESL measuring method. Part 2: Surface mount capacitors for use in electronic equipment
  • BS EN 60255-26:2013 Measuring relays and protection equipment. Electromagnetic compatibility requirements
  • BS EN 62132-3:2007 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Bulk current injection (BCI) method
  • BS EN 61000-4-30:2003 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods
  • 23/30472384 DC BS EN IEC 61000-4-2 Electromagnetic compatibility (EMC) - Part 4-2.. Testing and measurement techniques - Electrostatic discharge immunity test
  • 21/30438017 DC BS EN IEC 61000-4-2. Electromagnetic compatibility (EMC). Part 4-2: Testing and measurement techniques. Electrostatic discharge immunity test
  • BS EN 61000-4-5:2014+A1:2017 Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
  • BS EN 61000-4-5:1995 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Surge immunity test
  • BS 1728-17:1968 Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (volumetric method)
  • BS 5711-5:1979 Methods of sampling and test for glycerol - Determination of alkalinity or acidity: volumetric method
  • BS 9070-7:1971 Specification for fixed capacitors of assessed quality: generic data and methods of test - Mica dielectric capacitors
  • BS QC 300800:1991 Harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Sectional specification for fixed tantalum chip capacitors

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Capacity and discharge capacity

Association Francaise de Normalisation, Capacity and discharge capacity

  • NF S26-302:1960 CINEMATOGRAPHY. PROJECTOR SPOOLS FOR 8 MM FILM (15 M,30 M,60 M AND 120 M CAPACITY).
  • NF C91-004-2:1995 Electromagnetic compatibility (emc). Part 4 : testing and measurement techniques. Section 2 : electrostatic discharge immunity test. Basic EMC publication.
  • NF C91-004-2*NF EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2 : testing and measurement techniques - Electrostatic discharge immunity test
  • NF C46-021:1993 ELECTROMAGNETIC COMPATIBILITY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. PART 2 : ELECTROSTATIC DISCHARGE REQUIREMENTS. (EUROPEAN STANDARD EN 60 801-2).
  • NF EN 61000-4-2:2009 Compatibilité électromagnétique (CEM) - Partie 4-2 : techniques d'essai et de mesure - Essai d'immunité aux décharges électrostatiques
  • NF C93-400-22-1*NF EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements - Part 22-1 : capacitance tests - Test 22a : capacitance.
  • NF EN 60512-22-1:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 22-1 : essais de capacité - Essai 22a : capacité
  • NF C91-004-30:2003 Electromagnetic compatibility (EMC) - Part 4-30 : testing and measurement techniques - Power quality measurement methods.
  • NF C91-004-30:2009 Electromagnetic compatibility (EMC) - Part 4-30 : testing and measurement techniques - Power quality measurement methods.
  • NF C91-004-30/A1*NF EN 61000-4-30/A1:2021 Electromagnetic compatibility (EMC) - Part 4-30 : testing and measurement techniques - Power quality measurement methods
  • NF C91-004-30*NF EN 61000-4-30:2015 Electromagnetic compatibility (EMC) - Part 4-30 : testing and measurement techniques - Power quality measurement methods
  • NF EN 61000-4-30/A1:2021 Compatibilité électromagnétique (CEM) - Partie 4 30 : techniques d'essai et de mesure - Méthodes de mesure de la qualité de l'alimentation
  • NF EN 61000-4-30:2015 Compatibilité électromagnétique (CEM) - Partie 4-30 : techniques d'essai et de mesure - Méthodes de mesure de la qualité de l'alimentation
  • NF C46-020:1986 ELECTROMAGNETIC COMPATIBILITY MAINLY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. GENERAL INTRODUCTION.
  • NF C83-112:1981 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. SECTIONAL SPECIFICATION. TANTALUM CAPACITORS.
  • NF C96-261-3:2008 Integrated circuits - Measurement of electromagnetic immunity, 150 KHz to 1 GHz - Part 3 : Bulk Current Injection (BCI) method.

Korean Agency for Technology and Standards (KATS), Capacity and discharge capacity

  • KS B ISO 7842:2018 Automatic steam traps — Determination of discharge capacity — Test methods
  • KS C 0262-2014 Limits and methods of measurements of radio interference characteristics of electerical, electronic and information equipments
  • KS C 0262-2005 Electromagnetic compatibility(EMC)
  • KS C 0266-1995 Electromagnetic compatibility-Testing and measurement techniques-Surge immunity test
  • KS C 0269-1995 Electromagnetic compatibility-Testing and measurement techniques-Power frequency magnetic field immunity test
  • KS A ISO 1793-2010(2020) Cinematography－Reels for 16 mm motion-picture projectors (up to and including 610 m capacity：38 cm size)－Dimensions
  • KS C 0272-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASURMENT TECHNIQUES-VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TEST
  • KS C IEC 61000-4-2:2010 Electromagnetic compatibility(EMC)－Part 4-2：Testing and measurement techniques－Electrostatic discharge immunity test
  • KS A ISO 1793:2010 Cinematography-Reels for 16 mm motion-picture projectors (up to and including 610 m capacity:38 cm size)-Dimensions
  • KS C 9610-4-2-2017(2022) Electromagnetic compatibility (EMC) — Part 4—2: Testing and meaeurement techniques — Electrostatic discharge immunity test
  • KS C 9610-4-2-2017 Electromagnetic compatibility (EMC) — Part 4—2: Testing and meaeurement techniques — Electrostatic discharge immunity test
  • KS C IEC TS 62370:2017 Electroacoustics — Instruments for the measurement of sound intensity — Electromagnetic and electrostatic compatibility requirements and test procedures
  • KS C CISPR 17-2004 Electromagnetic compatibility(EMC)-Methods of measurement of the suppression characteristics ofpassive radio interference filters and suppression components
  • KS C CISPR 19-2004 Electromagnetic compatibility(EMC)- Guidance on the use of the substitution method for measurement of radiation from microwave ovens for frequencies above 1 GHz
  • KS C IEC 61000-4-30:2012 Electromagnetic compatibility(EMC)－Part 4-30：Testing and measurement techniques－Power quality measurement methods
  • KS C IEC 61000-4-30:2019 Electromagnetic compatibility(EMC) — Part 4-30: Testing and measurement techniques — Power quality measurement methods
  • KS C IEC 62391-2-2015(2020) Fixed electric double-layer capacitors for use in electronic equipment－Part 2: Sectional specification - Electric double–layer capacitors for power application
  • KS R 0122-2012 Road vehicles－Exhaust emissions and fuel consumption measurements for externally chargeable hybrid electric vehicles
  • KS C 8532-1995(2020) Measuring procedure of residual capacity for lead acid battery in photovoltaic system
  • KS A 4614-2006(2011) Surface container of measuring instrument utilizing ionizing radiation
  • KS A 4614-1985 Surface container of measuring instrument utilizing ionizing radiation
  • KS M ISO 8309:2003 Refrigerated light hydrocarbon fluids-Measurement of liquid levels in tanks containing liquefied gases-Electrical capacitance gauges
  • KS M ISO 8309:2013 Refrigerated light hydrocarbon fluids－Measurement of liquid levels in tanks containing liquefied gases－Electrical capacitance gauges
  • KS C 9610-4-8-2017 Electromagnetic compatibility(EMC) — Part 4-8: Testing and measurement techniques — Power frequency magnetic field immunity test
  • KS A 4614-2013 Surface container of measuring instrument utilizing ionizing radiation
  • KS D ISO 11427:2006 Determination of silver in silver jewellery alloys－Volumetric (potentiometric) method using potassium bromide

KR-KS, Capacity and discharge capacity

  • KS B ISO 7842-2018 Automatic steam traps — Determination of discharge capacity — Test methods
  • KS C IEC 61000-4-2-2010 Electromagnetic compatibility(EMC)－Part 4-2：Testing and measurement techniques－Electrostatic discharge immunity test
  • KS C IEC TS 62370-2017 Electroacoustics — Instruments for the measurement of sound intensity — Electromagnetic and electrostatic compatibility requirements and test procedures
  • KS C IEC 61000-4-30-2019 Electromagnetic compatibility(EMC) — Part 4-30: Testing and measurement techniques — Power quality measurement methods

CZ-CSN, Capacity and discharge capacity

Professional Standard - Machinery, Capacity and discharge capacity

  • JB/T 56211-1999 Product quality classification of coupling capacitors and capacitor voltage regulators
  • JB/T 56051.3-1999 Product Quality Grading of Pulse Capacitors and DC Capacitors
  • JB/T 9478.11-1999 Measuring methods of photocell - Junction capacitance
  • JB/T 9478.11-2013 Photovoltaic Cell Measurement Methods Part 11: Junction Capacitance

Guizhou Provincial Standard of the People's Republic of China, Capacity and discharge capacity

  • DB52/T 929-2014 CA90 Large Capacity Non-Solid Electrolyte Tantalum Fixed Capacitor
  • DB5206/T 125-2020 Cultivation technology and quality classification of camellia oleifera light substrate container seedlings
  • DB52/T 1331-2018 Electromagnetic compatibility measurement method of Beidou vehicle navigation terminal

Standard Association of Australia （SAA）, Capacity and discharge capacity

International Organization for Standardization (ISO), Capacity and discharge capacity

  • ISO 1793:1975 Cinematography; Reels for 16 mm motion-picture projectors (up to and including 120 m capacity : 18 cm size); Dimensions
  • ISO 1793:2005 Cinematography - Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) - Dimensions
  • ISO 11427:1993 Determination of silver in silver jewellery alloys; volumetric (potentiometric) method using potassium bromide

SE-SIS, Capacity and discharge capacity

SAE - SAE International, Capacity and discharge capacity

  • SAE AIR1184A-1989 Capacitive Fuel Gauging System Accuracies
  • SAE J1113-13-2002 Electromagnetic Compatibility Measurement Procedure for Vehicle ComponentsPart 13: Immunity to Electrostatic Discharge
  • SAE J1113-13-2004 Electromagnetic Compatibility Measurement Procedure for Vehicle ComponentsPart 13: Immunity to Electrostatic Discharge
  • SAE J1113-13-2015 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13: Immunity to Electrostatic Discharge
  • SAE J1113-13-1997 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13 - Immunity to Electrostatic Discharge
  • SAE J1113/13-1995 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13 - Immunity to Electrostatic Discharge@ Recommended Practice (February 1995)

工业和信息化部, Capacity and discharge capacity

  • YD/T 2829-2015 Electromagnetic compatibility requirements and measurement methods for sensing layer equipment
  • YD/T 983-2018 Electromagnetic compatibility requirements and measurement methods for communication power equipment

Professional Standard - Recommended Standards for Engineering Construction, Capacity and discharge capacity

  • CECS 33-1991 THE SELECTION STANDARD FOR SERIES OF VOLTAGE AND CAPACITY OF SHUNT CAPACITOR

Professional Standard - Electricity, Capacity and discharge capacity

  • DL/T 1021-2006 Capacitance weir transducer
  • DL/T 1021-2019 Capacitive Weir Water Level Gauge
  • DL/T 2207-2021 Power Capacitor Noise Measurement Method
  • DL/T 2603-2023
  • DL/T 2083-2020 Ultrasonic measurement rules for storage capacity of hydropower stations
  • DL/T 1652-2016 Technical specifications for supercapacitors used in electric energy metering equipment
  • DL/T 1774-2017 Guidelines for power capacitor enclosures to withstand blast energy tests
  • DL/T 1397.2-2014 General specification for DC power system test equipments of electric power system.Part 2: Battery capacity discharge tester
  • DL/T 2238-2021 Technical Specifications for Allocation of Power System Emergency Reserve Capacity

Professional Standard - Electron, Capacity and discharge capacity

  • SJ/T 10299-1991 Specifications of capacitance measuring instruments
  • SJ/T 10300-1991 Test methods of capacitance measuring instruments
  • SJ/T 9503.15-1991 Mica dielectric capacitors--Quality grading standard
  • SJ/T 10725-2013 Electroacoustics.Measurement methods of electroacoustic characteristics for measurement condenser microphones
  • SJ/T 10223-1991 Key points for manufactrue quality control of tantalum electrolytic capacitors
  • SJ/T 10222-1991 Key points for manufacture quality control of aluminium electrolytic capacitors
  • SJ/T 10724-2013 Electroacoustics.General specification of measurement condenser microphones
  • SJ/T 10602-1994 Guidelines for quality engineering controlling of ceramoc dielectric capacitors
  • SJ/T 9503.11-1991 Class 1 ceramic dielectric capacitors--Quality grading standard
  • SJ/T 9503.13-1991 Class 2 ceramic dielectric capacitors--Quality grading standard
  • SJ/T 9503.2-1991 Tantalum capacitors with solid electrolyte--Quality grading standard
  • SJ/T 9503.1-1991 Non-solid aluminium electrolyte capacitors--Quality grading standard
  • SJ/T 9503.3-1991 Tantalum capacitors with no-solid electrolyte--Quality grading standard
  • SJ/T 9503.17-1991 Aluminium electrolyte capacitors for use in a.c. motors--Quality grading standard
  • SJ/T 10725-1996 Methods for tetermining main characteristics of measurement condenser microphones
  • SJ/T 9503.12-1991 Class 1 high-voltage ceramic dielectric capacitors--Quality grading standard
  • SJ/T 9503.14-1991 Class 2 high-voltage ceramic dielectric capacitors--Quality grading standard
  • SJ/T 10557.2-1994 Methods of crystal grain structure measurement for aluminum foil for high voltage electrolytic capacitors
  • SJ/T 10557.3-1994 Methods of measurement for average dislocation density of aluminum foil for electrolytic capacitors

Canadian Standards Association (CSA), Capacity and discharge capacity

  • CSA IEC 61000-4-30-04-CAN/CSA:2004 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques Power quality measurement methods First Edition
  • CSA CEI 61000-4-2-01-CAN/CSA AMD 2-2003 Compatibilite electromagnetique (CEM) - Partie 4-2: Techniques d抏ssai et de mesure - Essai d抜mmunite aux decharges Qlectrostatiques Premiere Edition
  • CSA IEC 61000-4-2-01-CAN/CSA AMD 2:2003 Amendment 2 Electromagnetic Compatibility (EMC) - Part 4-2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test First Edition
  • CSA CEI 61000-4-30-04-CAN/CSA-2004 Compatibilit?閘ectromagn閠ique (CEM) Partie 4-30: Techniques d磂ssai et de mesure M閠hodes de mesure de la qualit?de l碼limentation Premiere Edition
  • CAN/CSA-C61000-4-30-2010 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods (Second Edition)

Danish Standards Foundation, Capacity and discharge capacity

  • DS/EN 13648-3:2003 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
  • DS/IEC 801-2:1987 Electromagnetic compatibility for industrial-process measurement and control equipment. Part 2: Electrostatic discharge requirements
  • DS/EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
  • DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
  • DS/CLC/TR 50485:2010 Electromagnetic compatibility - Emission measurements in fully anechoic chambers
  • DS/EN 61000-4-30:2009 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
  • DS/EN 61000-4-30:2021 Electromagnetic compatibility (EMC) – Part 4-30: Testing and measurement techniques – Power quality measurement methods

Lithuanian Standards Office , Capacity and discharge capacity

  • LST EN 13648-3-2003 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
  • LST EN 61000-4-2-2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2:2008)
  • LST EN 60512-22-1-2010 Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (IEC 60512-22-1:2010)

国家市场监督管理总局、中国国家标准化管理委员会, Capacity and discharge capacity

  • GB/T 28543-2021 Noise measurement method on power capacitors
  • GB/T 39864-2021 Electrochemical performance test of lithium manganese oxide—Test method for the initial specific discharge capacity and the initial efficiency
  • GB/T 7777-2021 Measurement and evaluation of mechanical vibration of displacement compressors
  • GB/T 37201-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide —Test method for discharge specific capacity and charge-discharge coulombic efficiency of the first cycle
  • GB/T 39861-2021 Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life
  • GB/T 21663-2019 Specific requirements for small capacity cylindrical rotor synchronous machines
  • GB/T 37207-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide— Test method for discharge plateau capacity ratio and cycle life
  • GB/T 17832-2021 Silver jewellery alloys—Determination of silver—Volumetric (potentiometric) method using potassium bromide

American National Standards Institute （ANSI), Capacity and discharge capacity

National Metrological Verification Regulations of the People's Republic of China, Capacity and discharge capacity

  • JJG 2075-1990 Verification Scheme of Capacitance Measuring Instruments
  • JJG 137-1986 Verification Regulation of Small Capacitance Measuring Instrument Type CC-6
  • JJG 138-1986 Verification Regulation of Precision Capacitance Measuring Instrument Type CCJ-1C
  • JJG(电子) 05006-1987 1620 Type Capacitance Measuring Device Trial Verification Regulations
  • JJG 197-1979 Verification Regulation of LCCG-1 Type HF Inductance and Capacitance Meter

Professional Standard - Chemical Industry, Capacity and discharge capacity

Professional Standard - Energy, Capacity and discharge capacity

国家能源局, Capacity and discharge capacity

U.S. Military Regulations and Norms, Capacity and discharge capacity

Electronic Components, Assemblies and Materials Association, Capacity and discharge capacity

  • ECA 535BAAA-1987 Fixed Tantalum Chip Capacitor Style 1 Protected-Standard Capacitance Range
  • ECA 535BAAB-1987 Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range
  • ECA 191-D-1985 Measurement of Direct Interelectrode Capacitances of Electron Tubes
  • ECA 535BAAD-1991 Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range Replaces IS-29-86

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Capacity and discharge capacity

  • ITU-R F.497-3-1990 Radio-Frequency Channel Arrangements for Low and Medium Capacity Analogue or Medium and High Capacity Digital Radio- Relay Systems Operating in the 13 GHz Band - Section 9B1 - Radio- Frequency Channel Arrangements

ZA-SANS, Capacity and discharge capacity

  • SANS 61000-4-2:2001 Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
  • SANS 1250:1979 Capacitors for use with fluorescent and other discharge lamp ballasts
  • SANS 61000-4-2:2009 Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
  • SANS 61000-4-30:2003 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques - Power quality measurement methods
  • SANS 11427:1993 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide
  • SANS 61000-4-30:2009 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques - Power quality measurement methods

ECIA - Electronic Components Industry Association, Capacity and discharge capacity

  • 191-D-1985 Measurement of Direct Interelectrode Capacitances of Electron Tubes

RO-ASRO, Capacity and discharge capacity

  • STAS 11071/17-1983 Legal mc Lrology BLOCK DIAGRAM OF [UERAKCH V OF MEASURING INSTRUMENTS FOR ELECTRICAL CAPACITANCE
  • STAS 12755/1-1989 Electromagnetic compatibility ELECTROMAGNETIC COMPATIBI LITY FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT General introduction
  • STAS 9190-1973 PAPER DIELECTRIC CAPACITORS FOR LIGHTING FITTINGS WITH GAS DISCHARGE LAMPS General technical requirements for quality

U.S. Air Force, Capacity and discharge capacity

European Committee for Electrotechnical Standardization（CENELEC）, Capacity and discharge capacity

  • EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
  • HD 148 S2-1977 Methods for the Measurement of Direct Interelectrode Capacitances of Electronic Tubes and Valves
  • EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
  • EN 61000-4-30:2015 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
  • HD 481.2-1987 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Electrostatic Discharge Requirements

Japanese Industrial Standards Committee (JISC), Capacity and discharge capacity

  • JIS C 61000-4-2:2012 Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques -- Electrostatic discharge immunity test
  • JIS C 5402-22-1:2016 Connectors for electronic equipment -- Tests and measurements -- Part 22-1: Capacitance tests -- Test 22a: Capacitance
  • JIS C 1000-4-2:1999 Electromagnetic compatibility (EMC) -- Part 4: Testing and measurement techniques -- Section 2: Electrostatic discharge immunity test
  • JIS C 61000-4-2:1999 Electromagnetic compatibility (EMC) -- Part 4: Testing and measurement techniques -- Section 2: Electrostatic discharge immunity test
  • JIS C 61000-4-22:2014 Electromagnetic compatibility (EMC) -- Part 4-22: Testing and measurement techniques -- Radiated emissions and immunity measurements in fully anechoic rooms (FARs)
  • JIS Z 4614:1993 Source container of measuring instrument utilizing ionizing radiation

European Telecommunications Standards Institute (ETSI), Capacity and discharge capacity

  • ETSI ETR 019-1991 Transmission and Multiplexing Specification of New Generation High-Capacity Digital Radio Systems
  • ETSI TS 103 051-2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); Expanded measurement uncertainty for the measurement of radiated electromagnetic fields (V1.1.1)
  • ETSI EN 301 489-50-2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment (V1.

Military Standard of the People's Republic of China-General Armament Department, Capacity and discharge capacity

  • GJB 860A-2006 Analysis for electric load and power source capacity of aircraft
  • GJB 860-1990 Aircraft electrical load and power capacity analysis
  • GJB 734B-2021 General specifications for small current capacity rotary switches
  • GJB 360.31-1987 Test methods for electronic and electrical components Capacitance test
  • GJB 10181-2021 General Specifications for Large Capacity and High Power Lithium Primary Batteries
  • GJB 734-1989 General specification for rotary switches (circuit selectors, small current capacity)
  • GJB 734A-2002 General specifications for rotary switches (circuit selectors, small current capacity)

JSAE - Society of Automotive Engineers of Japan@ Inc., Capacity and discharge capacity

  • JASO D609-2001 Automotive Parts - Current Capacity of Low Tension Cables
  • JASO D609-2017 Automotive Parts - Current Capacity of Low Tension Cables

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Capacity and discharge capacity

  • IEEE C63.6-1988 Standard for Electromagnetic Compatibility - Open - Area Test Site Measurements - Guide for the Computation of Errors
  • IEEE C63.19-2001 Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids
  • IEEE C63.19-2006 Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids
  • IEEE C63.19-2007 Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids

Institute of Electrical and Electronics Engineers (IEEE), Capacity and discharge capacity

  • IEEE Std C63.19-2006 Method of Measurement for Hearing Aid Compatibility with Wireless Communications

AENOR, Capacity and discharge capacity

  • UNE 49354:1986 AEROSOL CONTAINERS. MEASURING PARALLELITY OF THE BEAD WITH THE BOTTOM
  • UNE 15501:1992 OPEN FRONT MECHANICAL POWER PRESSES. CAPACITY RATINGS AND DIMENSIONS.
  • UNE-EN 61000-4-2:2010 Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
  • UNE-EN 61000-4-30:2009 Electromagnetic compatibility (EMC) -- Part 4-30: Testing and measurement techniques - Power quality measurement methods

Professional Standard - Nuclear Industry, Capacity and discharge capacity

  • EJ/Z 4-1978 Vacuum leak test rules for containers and equipment with helium hood method
  • EJ/T 641-1992 Determination of capacity of large lead-acid battery in nuclear power plant
  • EJ/T 525.1-2002 The vented lead-acid batteries used in nuclear power plants Part 1: Recommended practice for sizing

未注明发布机构, Capacity and discharge capacity

  • BS EN 60801-2:1993(1999)*IEC 801-2:1991 Electromagnetic compatibility for industrial - process measurement and control equipment — Part 2 : Electrostatic discharge requirements
  • BS EN 50723:2023 Measurement method for assessing the compatibility of induction hob and cookware

AR-IRAM, Capacity and discharge capacity

CH-SNV, Capacity and discharge capacity

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Capacity and discharge capacity

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Capacity and discharge capacity

CU-NC, Capacity and discharge capacity

  • NC 66-31-1986 Electronics. Ceramic Variable Capacitors. Quality Specifications
  • NC 81-36-1987 Sugar Industry. Barometric Condensers. Quality Specifications
  • NC 90-15-28-1984 Metrological Assurance. Electric Capacity Measurement Means. Transmission Diagram

TR-TSE, Capacity and discharge capacity

  • TS 2971-1978 Methods For The Measurement Of Direct Interelectrode Capacitances Of Electronic Tubes And Valves

Group Standards of the People's Republic of China, Capacity and discharge capacity

  • T/CSEE 0032-2017 Relative dielectric loss factor and capacitance ratio live test method of capacitive equipment
  • T/EERT 013-2021 Regulation of water environmental capacity and pollution load allocation in small and medium-sized towns
  • T/CPCACN 0012-2022 Quality Requirement of Portable Ultra-low Volume Spray Electric Sprayer
  • T/CSEE 0197-2021 Guide for capacity configuration of electric power system contingency reserve

Professional Standard - Aviation, Capacity and discharge capacity

  • HB 6178-1988 Installation and Calibration of Capacitive Fuel Quantity Measuring System
  • HB 5858-1984 General technical specification for capacitive fuel quantity measurement and control system

ES-UNE, Capacity and discharge capacity

  • UNE-EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (Endorsed by AENOR in October of 2010.)
  • UNE-EN 61000-4-30:2015 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
  • UNE-EN 61000-4-30:2015/AC:2017-01 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
  • UNE-EN 61000-4-30:2015/A1:2022 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
  • UNE-HD 148S2:1977 METHODS FOR THE MEASUREMENT OF DIRECT INTERELECTRODE CAPACITANCES OF ELECTRONIC TUBES AND VALVES. (Endorsed by AENOR in December of 1995.)
  • UNE-CEN/TR 17911:2023 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content (Endorsed by Asociación Española de Normalización in March of 2023.)
  • EN 50723:2023 Measurement method for assessing the compatibility of induction hob and cookware

National Metrological Technical Specifications of the People's Republic of China, Capacity and discharge capacity

  • JJF(电子) 13-1982 Calibration Method of CC-6 Small Capacitance Measuring Instrument
  • JJF 1095-2002 Calibration Specification for Capacitor Dielectric Loss Meters
  • JJF 1653-2017 Calibration Specification for Condenser Project Measurement Microphones
  • JJF(电子) 12-1982 Calibration method of CCJ-1A, B, C precision capacitance measuring instrument

Society of Motion Picture and Television Engineers (SMPTE), Capacity and discharge capacity

  • SMPTE 235-1998 Motion-Picture Equipment (16-mm) - Projection Reels - 200- to 2300-ft Capacity Revision of ANSI/SMPTE 235-1987

TH-TISI, Capacity and discharge capacity

  • TIS 1452-2009 Electromagnetic compatibility (emc).part 4: testing and measurement techniques.section 2: electrostatic discharge immunity test

NEMA - National Electrical Manufacturers Association, Capacity and discharge capacity

  • NEMA WC 20-1976 Dimensions and Capacities of Returnable Reels for Wires and Cables

YU-JUS, Capacity and discharge capacity

  • JUS N.J2.056-1982 Primary cells and batteries. Battery R20C. High capacity category
  • JUS N.J2.052-1982 Primary cells and batteries. Battery R14C. High capacity category
  • JUS N.J2.050-1982 Primar/ cells and batteries. Battery R6P. High povver category
  • JUS N.J2.057-1982 Primary cells and batteries. Battery R20P. High povver categor/
  • JUS N.J2.049-1982 Primary cells and batteries. Battery R6C. High capacity category
  • JUS N.J2.053-1982 lis and batteries. Battery R14P. High power category
  • JUS N.N6.133-1980 Radiocommunications. TV receivers. Methods of measurements. Compatibility with signal recording equipment

CN-QIYE, Capacity and discharge capacity

  • Q/GDW 1895-2013 Guidelines for field application of dielectric dissipation factor and capacitance live test technology for capacitive equipment
  • Q/GDW 1901.2-2013 General technical requirements for test equipment for electric DC power supply systems Part 2: Battery capacity discharge tester

IN-BIS, Capacity and discharge capacity

FI-SFS, Capacity and discharge capacity

CENELEC - European Committee for Electrotechnical Standardization, Capacity and discharge capacity

  • CLC/TR 50485-2010 Electromagnetic compatibility - Emission measurements in fully anechoic chambers
  • EN 61000-4-30:2009 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

Professional Standard - Petroleum, Capacity and discharge capacity

  • SY/T 6612-2005 The figures & tables with their format for the report of proved oil and gas reserves

Professional Standard - Post and Telecommunication, Capacity and discharge capacity

  • YD/T 2655-2013 Electromagnetic Compatibility Requirements and Measurement Methods for Video Surveillance Equipment Connected to Telecommunications Networks
  • YD/T 1103-2001 Requirements and Measurement Methods of Electromagnetic Compatibility for Cordless Telephone
  • YD/T 968-2002 Requirements and methods of measurement of electromagnetic compatibility for telecommunication terminal equipment
  • YD/T 983-1998 Limits and methods of measurement of electromagnetic compatibility for telecommunication power supply equipment
  • YD/T 983-2013 Limits and methods of measurement of electromagnetic compatibility of telecommunication power supply equipment
  • YD/T 968-1998 Electromagnetic Compatibility Limits and Measurement Methods for Telecommunication Terminal Equipment
  • YD/T 968-2010 Requirements and measurement methods of electromagnetic compatibility for telecommunication terminal equipment
  • YD/T 968-2023 Electromagnetic Compatibility Requirements and Measurement Methods for Telecom Terminal Equipment
  • YD/T 2654-2013 Electromagnetic Compatibility Requirements and Measurement Methods for Wireless Power Devices

GOSTR, Capacity and discharge capacity

  • GOST IEC 61000-4-30-2017 Electromagnetic compatibility (EMC). Part 4-30. Testing and measurement techniques. Power quality measurement methods

CN-STDBOOK, Capacity and discharge capacity

  • 图书 3-9846 Understanding and Implementation of GB/T 35710-2017 "Guidelines for Capacity Evaluation of Power Transformers with Voltage Levels 35kV and Below"

European Committee for Standardization (CEN), Capacity and discharge capacity

  • EN 13183-3:2005 Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method
  • EN 840-2:2012 Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s)@ for trunnion and/or comb lifting devices - Dimensions and design
  • EN 840-4:2012 Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
  • EN 840-4:2020 Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
  • EN 840-2:2020 Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s)@ for trunnion and/or comb lifting devices - Dimensions and design
  • EN 840-2:1997 Mobile Waste Containers - Part 2: Containers with Four Wheels with a Capacity from 500 l to 1200 l with Flat Lid(s), for Trunnion and/or Comb Lifting Devices - Dimensions and Design
  • EN 840-4:1997 Mobile Waste Containers - Part 4: Containers with Four Wheels with a Capacity from 750 l to 1700 l with Flat Lid(s), for Wide Trunnion or BG-and/or Wide Comb Lifting Device - Dimensions and Design
  • EN ISO 11427:2016 Jewellery - Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:2014)

PL-PKN, Capacity and discharge capacity

  • PN E83006-03-1991 Lead-acid batteriesDimensions and capacities of batteries with pasted positive
  • PN E83001-02-1990 Lead-acid starter batteries Batteries of nomina? voltage 6 V Dimensions and capacities
  • PN E83001-03-1987 Lead acid starter batteries Batteries of nomina? voltage 12 V Dimensions and capacities
  • PN T05123-1986 Electromechanical components for electronic e?uipment; basie testing procedures and measuring methods Current-carrying capacity tests

American Society for Testing and Materials (ASTM), Capacity and discharge capacity

  • ASTM F2490-20 Standard Guide for Aircraft Electrical Load and Power Source Capacity Analysis
  • ASTM E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter

Ningxia Provincial Standard of the People's Republic of China, Capacity and discharge capacity

  • DB64/T 882-2013 Guidelines for Risk Assessment and Safety Capacity Analysis of Chemical Industry Parks (Agglomeration Areas)

Defense Logistics Agency, Capacity and discharge capacity

US-FCR, Capacity and discharge capacity

ATIS - Alliance for Telecommunications Industry Solutions, Capacity and discharge capacity

  • 0700004-2007 High Capacity – Spatial Division Multiple Access (HC-SDMA) Radio Interface Standard

Alliance of Telecommunications Industry Solutions （ATIS), Capacity and discharge capacity

  • ATIS 0700004-2007 High Capacity - Spatial Division Multiple Access (HC-SDMA) Radio Interface Standard

  Discharge specific capacity, Capacity discharge, discharge capacity, Discharge capacity Discharge specific capacity, Charge and discharge capacity, Discharge gram capacity, specific capacity discharge, Discharge capacity and discharge capacity, Discharge capacity and specific capacity, Capacity and discharge capacity, Discharge specific capacity and gram capacity, First discharge specific capacity and capacity, First discharge capacity, Gram capacity and discharge capacity, Discharge capacity Discharge specific capacity, Discharge capacity, Discharge capacity and specific capacity?, Capacity discharge, discharge capacity discharge capacity, Charge-discharge specific capacity and charge-discharge capacity.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved