ZH
RU
ES

Current correction method

Current correction method, Total:500 items.

In the international standard classification, Current correction method involves: Electricity. Magnetism. Electrical and magnetic measurements, Railway rolling stock, Magnetic materials, Electromechanical components for electronic and telecommunications equipment, Electrical wires and cables, Soil quality. Pedology, Aerospace electric equipment and systems, Kitchen equipment, Acoustics and acoustic measurements, Electronic tubes, Optoelectronics. Laser equipment, Electrical engineering in general, Solar energy engineering, Protection against electric shock, Electronic display devices, Electrical accessories, Applications of information technology, Earthworks. Excavations. Foundation construction. Underground works, Dentistry, Measurement of fluid flow, Cinematography, Sensory analysis, Laundry appliances, Fuels, Ventilators. Fans. Air-conditioners, Rectifiers. Convertors. Stabilized power supply, Products of the textile industry, Particle size analysis. Sieving, Protective equipment, Lamps and related equipment, Electromagnetic compatibility (EMC), Textile fibres, Road engineering, Rotating machinery, Power transmission and distribution networks, Electrical and electronic testing, Galvanic cells and batteries, Construction materials, Products of the chemical industry, Road vehicle systems, Conducting materials, Switchgear and controlgear, Paper and board, Information technology (IT) in general, Shipbuilding and marine structures in general, Fasteners for aerospace construction, Radiation measurements, Protection against fire, Vibrations, shock and vibration measurements, Components and accessories for telecommunications equipment, Fuel cells, Hydraulic construction, Fluid power systems, Wood-based panels, Semiconductor devices, Resistors, Installations in buildings, Water quality, Electronic components in general, Fruits. Vegetables, Transformers. Reactors, Environmental protection, Bearings, Milk and milk products, Insulation, Fibre optic communications, Microbiology, Internal combustion engines for road vehicles, Electric traction equipment, Graphic technology, Telecommunication systems, Photography, Geology. Meteorology. Hydrology, Building accessories, Domestic electrical appliances in general, Iron and steel products, Nuclear energy engineering, Measurement of volume, mass, density, viscosity, General methods of tests and analysis for food products, Electrical equipment for working in special conditions, Environmental testing, Domestic, commercial and industrial heating appliances, Testing of metals, Non-destructive testing, Materials for aerospace construction, Internal combustion engines, Thermodynamics and temperature measurements, Electronic component assemblies, Optical equipment.

IEC - International Electrotechnical Commission, Current correction method

IEC 60185:1987 Current Transformers (Edition 2.0; Amendment 1-1990; Amendment 2-1995)
TS 61973 AMD 1-2019 AMENDMENT 1 High voltage direct current (HVDC) substation audible noise (Edition 1.0)
TS 60479-1 AMD 1-2016 AMENDMENT 1 Effects of current on human beings and livestock – Part 1: General aspects (Edition 4.0)
CISPR 20-1996 Limits and Methods of Measurement of Immunity Characteristics of Sound and Television Broadcast Receivers and Associated Equipment (Edition 3.0; AS/NZS 3951.10: 1994; Amendment 1-02/1997; Amendment 2-08/1997)
CISPR/TR 16-3 AMD 1-2005 Specification for radio disturbance and immunity measuring apparatus and methods – Part 3: CISPR technical reports Amendment 1 (Edition 2.0)
CISPR/TR 16-3 AMD 2-2006 Specification for radio disturbance and immunity measuring apparatus and methods – Part 3: CISPR technical reports Amendment 2 (Edition 2.0)

Professional Standard - Aviation, Current correction method

HB 5630-1981 AC correction motor stator plate assembly
HB 5374-1987 Method for measuring galvanic current of different metals
HB 5356-1986 Eddy current test method for electrical conductivity of aluminum alloy

Military Standard of the People's Republic of China-General Armament Department, Current correction method

GJB 8219-2014 Atmospheric radio refraction correction method of exterior ballistic measurement
GJB 1655-1993 Tropospheric Radio Refraction Modified Atmospheric Model
GJB/Z 75-1995 Correction method for ionospheric refraction error of external ballistic measurement system
GJB 5222-2004 Atmospheric refraction correction method at low elevation angles over sea
GJB 5092-2004 Determination and correction method of artillery muzzle velocity reduction
GJB 6367-2008(XG1-2015) Modification sheet 1-2015 of the square wave calibration method for nanosecond voltage dividers and current coils
GJB 1808-1993(XG1-2015) Calibration Method of Vacuum Gauge Dynamic Flow Method Modification Sheet 1-2015
GJB/Z 95-1997 Calculation method of short-circuit current of ship DC power system
GJB 2677-1996 Radar power distribution subsystem performance test method DC power supply, single-phase AC power supply

Institute of Electrical and Electronics Engineers (IEEE), Current correction method

IEEE Std 835a-2012 IEEE Standard Power Cable Ampacity Tables Amendment 1: Revision to Introduction
IEEE P835a/D2, October 2012 IEEE Draft Standard Power Cable Ampacity Tables - Amendment 1: Revision to Introduction
IEEE Std C37.012a-2020 IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V Amendment 1
IEEE Std C37.110-2007/COR 1-2010 IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes Corrigendum 1: Corrections to Equation 18 and Equation 19
IEEE Approved Std PC37.09-1999/Cor1/D7.2, Nov 2006 Approved IEEE Draft Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis---Amendment 1: Capacitance Current Switching
IEEE 1185/COR-2000 Guide for installation methods for generating station cables; Corrections
IEEE PC37.110-2007/Cor 1/D1, August 2010 IEEE Draft Guide for the Application of Current Transformers Used for Protective Relaying Purposes - Corrigendum 1: Corrections to Equation 18 and Equation 19
IEEE P693a/D2, August 2023 IEEE Draft Recommended Practice for Seismic Design of Substations Amendment: Alterations of Transformers and Select Appendages, Surge Arresters, Response Spectra, Time Histories, and Their Qualification Methodologies Amendment #
IEEE Unapproved Draft Std PC57.18.10a/D2, Sep 2007 IEEE Draft Standard Practices and Requirements for Semiconductor Power Rectifier Transformers Amendment 1: Added Technical and Editorial Corrections
IEEE Std C37.04b-2008 Rating structure for ac high-voltage circuit breakers rated on a symmetrical current basis - Amendment 2: To change the description of transient recovery voltage for harmonization with IEC 62271-100
IEEE Std 269a-2007 IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets Amendment 1
IEEE Std 269a-2012 IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets--Amendment 1
IEEE Std PC37.20.1b/D3 Unapproved IEEE Draft Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear---Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear (Amendment to C37.20.1-2002)
IEEE Std PC37.20.1b/D2 Unapproved IEEE Draft Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear---Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear (Amendment to C37.20.1-2002)
IEEE Std C37.110-2007/Cor 1-2010 (Corrigendum to IEEE Std C37.110-2007) IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes Corrigendum 1: Corrections to Equation 18 and Equation 19
IEEE Std C57.110-1998 Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE PC37.012a/D1.7, January 2020 IEEE Draft Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V Amendment Changing the Capacitive Inrush/Outrush Limitations of Switchgear
IEEE PC37.012a/D1.8, April 2020 IEEE Draft Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V Amendment Changing the Capacitive Inrush/Outrush Limitations of Switchgear
IEEE 661/COR-1997 Method for determining objective loudness ratings of telephone connections; Correction
IEEE Std C37.30.1a-2017 IEEE Standard Requirements for AC High-Voltage Air Switches Rated Above 1000 V -- Amendment 1: Criteria for acceptance
IEEE 62582-2/AMD 1-2016 AMENDMENT 1 Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 2: Indenter modulus (Edition 1.0)
IEEE Std P802.3ah/D3.3 IEEE Draft Amendment to Carrier Sense Multiple Access With Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications IEEE Draft Amendment to - Information Technology - Telecommunications and Information Exchange Between Systems - Local

International Electrotechnical Commission (IEC), Current correction method

IEC 60523:1975/AMD1:1979/COR1:1980 Corrigendum 1 to Amendment 1 - Direct-current potentiometers
IEC 60456:2010/AMD1:2022 Amendment 1 - Clothes washing machines for household use - Methods for measuring the performance
IEC 60530 AND 2:2004 (Amendment 2) Methods for measuring the performance of electric kettles and jugs for household and similar use
CISPR 22 AMD 2-2002 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement; Amendment 2
CISPR 22 AMD 1-1995 Limits and methods of measurement of radio interference characteristics of information technology equipment; Amendment 1
IEC 60287-2-1:1994/AMD2:2006/COR1:2008 Corrigendum 1 - Amendment 2 - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of the thermal resistance
IEC 60990:1999 Methods of measurement of touch current and protective conductor current
IEC TR 60990:1990 Methods of measurement of touch-current and protective conductor current
IEC 60990:2016 RLV Methods of measurement of touch current and protective conductor current
IEC 60990:2016 Methods of measurement of touch current and protective conductor current
IEC TR 62757:2015/AMD1:2019 Amendment 1 - Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible AC transmission systems (FACTS) and their valve halls
CISPR 20 AMD 1-2002 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement; Amendment 1
IEC 62560:2011/AMD1:2015/COR1:2015 Corrigendum 1 - Amendment 1 - Self-ballasted LED-lamps for general lighting services by voltages >50 V - Safety specifications
IEC 62230:2006/AMD1:2013 Amendment 1 - Electric cables - Spark-test method
IEC 60100:1962/AMD1:1969 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
IEC 61009-1:2010/AMD2:2013/COR1:2014 Corrigendum 1 - Amendment 2 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
IEC 61008-1:2010/AMD2:2013/COR1:2014 Corrigendum 1 - Amendment 2 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

JP-JARI, Current correction method

JRIS J0561 AMD 1-2017 Rolling stock - Voltmeters and ammeters - (Amendment 1)

German Institute for Standardization, Current correction method

DIN EN 60523/A2:1999-01 Direct-current potentiometers; Amendment A2 (IEC 60523:1975/A2:1997); German version EN 60523:1993/A2:1997
DIN EN 60524/A2:1999-01 Direct-current resistive volt ratio boxes; Amendment A2 (IEC 60524:1975/A2:1997); German version EN 60524:1993/A2:1997
DIN EN 50242/DIN EN 60436:2013 Electric dishwashers for household use - Methods for measuring the performance (IEC 60436:2004, modified + A1:2009, modified + A2:2012, modified); German version EN 50242/EN 60436:2008 + EN 50242:2008/A11:2012
DIN EN 60564/A2:1999-01 D.C. bridges for measuring resistance; Amendment A2 (IEC 60564:1977/A2:1997); German version EN 60564:1993/A2:1997
DIN EN 61229/A1:1999 Rigid protective covers for live working on a.c. installations; Amendment A1 (IEC 61229:1993/A1:1998); German version EN 61229:1995/A1:1998
DIN EN 61008-1:2015 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules (IEC 61008-1:2010, modified + A1:2012, modified + A2:2013, modified + A2:2013/Cor.:2014); German version EN 6
DIN EN 16867:2022 Building hardware - Mechatronic door furniture - Requirements and test methods (includes Amendment :2021)
DIN EN 61009-1:2015 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules (IEC 61009-1:2010, modified + A1:2012, modified + A1:2012/Cor.:2012 + A2:2013, modified + A2:2013/Cor.:2014); Ge
DIN EN 61008-1:2016 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules (IEC 61008-1:2010, modified + A1:2012, modified + A2:2013, modified + A2:2013/Cor.:2014); German version EN 6
DIN EN ISO 21420/A1:2021-11 Protective gloves - General requirements and test methods - Amendment 1 (ISO 21420:2020/DAM 1:2021); German and English version EN ISO 21420:2020/prA1:2021 / Note: Date of issue 2021-10-22*Intended as an amendment to DIN EN ISO 21420 (2020-06).
DIN EN 13384-1:2019 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating combustion (includes Amendment A1:2019)
DIN EN 61009-1:2016 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules (IEC 61009-1:2010, modified + A1:2012, modified + A1:2012/Cor.:2012 + A2:2013, modified + A2:2013/Cor.:2014); Ge
DIN EN 14988:2020 Children's high chairs - Requirements and test methods (includes Amendment :2020)
DIN EN 589:2022 Automotive fuels - LPG - Requirements and test methods (includes Amendment :2022)
DIN EN 14428:2019 Shower enclosures - Functional requirements and test methods (includes Amendment :2018)
DIN EN 14528:2018 Bidets - Functional requirements and test methods (includes Amendment :2018)
DIN ISO 532-1:2020 Acoustics - Methods for calculating loudness - Part 1: Zwicker method (ISO 532-1:2017, Corrected version 2017-11); Text in German and English
DIN EN 590:2017 Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017)
DIN EN 13310:2019 Kitchen sinks - Functional requirements and test methods (includes Amendment :2018)
DIN EN 61008-1:2018 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules (IEC 61008-1:2010, modified + A1:2012, modified + A1:2012/COR1:2016 + A2:2013, modified + A2:2013/Cor.:2014);
DIN EN 60990:2000 Methods of measurement of touch current and protective conductor current (IEC 60990:1999); German version EN 60990:1999
DIN EN 60436:2021 Electric dishwashers for household use - Methods for measuring the performance (IEC 60436:2015, modified); German version EN 60436:2020 + AC:2020
DIN EN 13407:2018 Wall-hung urinals - Functional requirements and test methods (includes Amendment :2018)
DIN EN 12467:2018 Fibre-cement flat sheets - Product specification and test methods (includes Amendment :2018)
DIN EN 228:2017 Automotive fuels - Unleaded petrol - Requirements and test methods (includes Amendment :2017)
DIN EN 13384-2:2019 Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one combustion appliance (includes Amendment A1:2019)
DIN EN 13374:2019 Temporary edge protection systems - Product specification - Test methods (includes Amendment :2018)
DIN EN 16734:2019 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods (includes Amendment :2018)
DIN EN ISO 20344/A1:2023-08 Personal protective equipment - Test methods for footwear - Amendment 1 (ISO 20344:2021/DAM 1:2023); German and English version EN ISO 20344:2021/prA1:2023 / Note: Date of issue 2023-06-30*Intended as an amendment to DIN EN ISO 20344 (2022-04).
DIN EN 12697-26:2022 Bituminous mixtures - Test methods - Part 26: Stiffness (includes Amendment A1:2022)
DIN EN 13089:2022 Mountaineering equipment - Ice-tools - Safety requirements and test methods (includes Amendment :2021)
DIN EN 1069-1:2019 Water slides - Part 1: Safety requirements and test methods (includes Amendment A1:2019)
DIN EN 492:2018 Fibre-cement slates and fittings - Product specification and test methods (includes Amendment :2018)
DIN EN 15918:2017 Cycles - Cycle trailers - Safety requirements and test methods (includes Amendment :2017)
DIN 26281:2010-11 Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings (ISO/TS 16281:2008 + Cor. 1:2009)
DIN EN 60682/A2:1997-12 Method of measuring the pinch temperature of quartz glass lamps; Amendment A2 (IEC 60682:1980/A2:1997); German version EN 60682:1993/A2:1997
DIN EN 60705:2013 Household microwave ovens - Methods for measuring performance (IEC 60705:2010, modified); German version EN 60705:2012
DIN EN 16475-7:2020 Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods (includes Amendment A1:2020)
DIN EN 16709:2019 Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods (includes Amendment :2018)
DIN EN 1158:2003-04 Building hardware - Door coordinator devices - Requirements and test methods (includes amendment A1:2002); German version EN 1158:1997 + A1:2002
DIN EN 1158 Berichtigung 1:2006-06 Building hardware - Door coordinator devices - Requirements and test methods (includes amendment A1:2002); German version EN 1158:1997 + A1:2002, Corrigenda to DIN EN 1158:2003-04; German version EN 1158:1997/AC:2006
DIN EN 12453:2022 Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods (includes Amendment :2021)
DIN 53019-3:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections
DIN EN 1155:2003-04 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods (includes amendment A1:2002); German version EN 1155:1997 + A1:2002
DIN EN 1155 Berichtigung 1:2006-06 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods (includes amendment A1:2002); German version EN 1155:1997 + A1:2002, Corrigenda to DIN EN 1155:2003-04; German version EN 1155:1997/AC:2006
DIN EN 12491:2022 Paragliding equipment - Emergency parachutes - Safety requirements and test methods (includes Amendment :2021)
DIN EN 748:2018 Playing field equipment - Football goals - Functional and safety requirements, test methods (includes Amendment :2018)
DIN EN 1154:2003-04 Building hardware - Controlled door closing devices - Requirements and test methods (includes amendment A1:2002); German version EN 1154:1996 + A1:2002
DIN EN 1154 Berichtigung 1:2006-06 Building hardware - Controlled door closing devices - Requirements and test methods (includes amendment 1:2002); German version EN 1154:1996 + A1:2002, Corrigenda to DIN EN 1154:2003-04; German version EN 1154:1996/AC:2006

Professional Standard - Energy, Current correction method

NB/T 10427-2020 Test correction of dynamic liquid level in coalbed methane well and calculation method of bottom hole pressure
NB/T 42006-2013 Electrolyte test method for vanadium redox flow battery
NB/T 11064-2023 Zinc-based flow battery system test method

Association Francaise de Normalisation, Current correction method

NF EN ISO 13297/A1:2022 Petits navires - Installations électriques - Installations à courant alternatif et continu - Amendement 1
NF X10-323:1990 Mesure de débit des liquides dans les canaux découverts - Détermination de la correction de câble immergé
NF ISO 13325/A1:2023 Pneumatiques - Méthodes en roue libre pour le mesurage de l'émission acoustique issue du contact pneumatique/chaussée - Amendement 1 : incertitudes
NF E49-160-1/A1*NF ISO 6358-1/A1:2020 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1 : general rules and test methods for steady-state flow - Amendment 1 : effective conductance
NF V09-019/A1:2013 Sensory analysis - Methodology - Magnitude estimation - Amendment 1
NF S74-519/A1*NF EN ISO 20471/A1:2017 High visibility clothing - Test methods and requirements - Amendment 1
NF EN ISO 20471/A1:2017 Vêtements à haute visibilité - Méthodes d'essai et exigences - Amendement 1
NF M41-014/A1*NF EN ISO 8973/A1:2020 Liquefied petroleum gases - Calculation method for density and vapour pressure - Amendment 1
NF V37-530/A1*NF EN ISO 12863/A1:2016 Standard test method for assessing the ignition propensity of cigarettes - Amendment 1
NF EN ISO 24157/A1:2020 Optique et instruments ophtalmiques - Méthodes de présentation des aberrations de l'oeil humain - Amendement 1
NF C70-300:2000 Methods of measurement of touch current and protective conductor current.
NF C70-300*NF EN 60990:2016 Methods of measurement of touch current and protective conductor current
NF EN 60034-8/A1:2014 Machines électriques tournantes - Partie 8 : marques d'extrémité et sens de rotation - Amendement 1
NF T60-276/A1*NF ISO 27608/A1:2016 Animal and vegetable fats and oils . Determination of Lovibond colour . Automatic method - Amendment 1
XP ISO/TS 16281:2008 Roulements - Méthodes de calcul de la durée nominale de référence corrigée pour les roulements chargés universellement
NF EN 60990:2016 Méthodes de mesure du courant de contact et du courant dans le conducteur de protection
NF L54-002-143*NF EN 2591-428:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 428 : sinusoidal vibrations with passage of current for crimped terminal lugs.
NF E29-695/A1*NF EN ISO 11118/A1:2020 Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods - Amendment 1
NF EN ISO 11118/A1:2020 Bouteilles à gaz - Bouteilles à gaz métalliques non rechargeables - Spécifications et méthodes d'essai - Amendement 1
NF ISO 11843-5/A1:2017 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire - Amendement 1
NF EN ISO 14816/A1:2019 Télématique de la circulation et du transport routier - Identification automatique des véhicules et équipements - Codification et structure des données - Amendement 1
NF ISO 15152/A2:2018 Tabac - Détermination de la teneur en alcaloïdes totaux exprimés en nicotine - Méthode par analyse en flux continu - Amendement 2
XP E22-396*XP ISO/TS 16281:2008 Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings
NF T75-610/A1*NF EN ISO 24444/A1:2022 Cosmetics - Sun protection test methods - In vivo determination of the sun protection factor (SPF) - Amendment 1
NF ISO 8454/A1:2013 Cigarettes - Dosage du monoxyde de carbone dans la phase gazeuse de fumée de cigarette - Méthode IRND - Amendement 1
NF ISO 8454/A2:2020 Cigarettes - Dosage du monoxyde de carbone dans la phase gazeuse de fumée de cigarette - Méthode IRND - Amendement 2
NF EN 2591-428:2002 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 428 : vibrations sinusoïdales avec passage de courant pour cosses serties
NF ISO 27608/A1:2016 Corps gras d'origines animale et végétale - Détermination de la couleur Lovibond - Méthode automatique - Amendement 1

YU-JUS, Current correction method

JUS H.N3.202/1-1988 Dry feft. Testmethocm. Amendments
JUS G.F1.040/1-1993 Rubber for medical and pharmaceutical uses - General reqirements for quality and method for testing - Amendments

American Society for Testing and Materials (ASTM), Current correction method

ASTM A772/A772M-00(2005) Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00(2011) Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00(2011)e1 Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00(2022) Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00(2016) Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
ASTM E1258-88(2003) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM D8002-15 Standard Test Method for Modified Fouling Index (MFI-0.45) of Water
ASTM D8002-15e1 Standard Test Method for Modified Fouling Index (MFI-0.45) of Water
ASTM E1258-88(2008) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM E1258-88(2012) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM D2962-10 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches
ASTM D2962-97(2007) Standard Test Method for Calculating Volume-Temperature Correction For Coal-Tar Pitches
ASTM D2962-97(2002) Standard Test Method for Calculating Volume-Temperature Correction For Coal-Tar Pitches
ASTM D7048-04 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
ASTM D7048-04(2010) Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
ASTM D7048-16 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
ASTM B342-63(1980)e1 Test Method for Electrical Conductivity by Use of Eddy Currents
ASTM D5089-95(2003) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM E220-02 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E1004-09 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method

Japanese Industrial Standards Committee (JISC), Current correction method

JIS C 5402 AMD 1:2014 Method for test of connectors for use in electronic equipment (Amendment 1)
JIS A 1150 AMD 1:2014 Method of test for slump flow of concrete (Amendment 1)
JIS Z 8764:1980 Method of flow measurement by electromagnetic flowmeters
JIS C 60990:2023 Methods of measurement of touch current and protective conductor current
JIS Z 4511 AMD 1:2001 Methods of calibration for exposure meters and dose-equivalent meters (Amendment 1)
JIS K 2301 AMD 1:2022 Fuel gases and natural gas -- Methods for chemical analysis and testing (Amendment 1)
JIS B 8384:2011 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance
JIS C 8916 AMD 1:2005 Temperature coefficient measuring methods of output voltage and output current for crystalline solar cells and modules (Amendment 1)
JIS C 8937 AMD 1:2005 Temperature coefficient measuring methods of output voltage and output current for amorphous solar cells and modules (Amendment 1)
JIS A 1134 AMD 1:2022 Methods of test for particle density and water absorption of lightweight fine aggregates for structural concrete (Amendment 1)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Current correction method

GB/T 767-1965 Measuring method of dielectric loss tangent value of power cable (AC high voltage bridge method)
GB/T 42553-2023 Electroacoustics—Methods to determine corrections to obtain the free-field response of a sound level meter
GB/Z 33902-2017 Measurement of fluid flow by means of pressure differential devices—Guidelines on the effect of departure from the specifications and operating conditions given in GB/T 2624 and the correction methods
GB/T 3789.2-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of current of anode and grid
GB/T 1311-1989 Test procedure for direct current machines
GB/T 1311-2008 Test procedure for direct current machines
GB/T 3334-1999 Method of test for dissipation factor (tgδ) of cable paper at power frequence (Schering bridge method)
GB/T 12113-1996 Methods of measurement of touch-current and protective conductor current
GB/T 12113-2023 Methods of measurement of touch current and protective conductor current
GB/T 12113-2003 Methods of measurement of touch current and protective conductor current
GB/T 3048.14-1992 Electric cables and wires--Method for D.C.voltage test
GB/T 7094-2002 Vibration (sinusoidal) test method for electrical installations in ships
GB/T 7094-2016 Vibration (sinusoidal) test method for electrical installations in ships
GB/T 20114-2006 Specific test methods for d.c.machines on coventional and rectifier-fed supplies
GB 7016-1986 Fixed Resistor Current Noise Measurement Method
GB/T 7016-1986 Method of measurement of current noise generated in fixed resistors
GB/T 42001-2022 Altitude correction method for external insulation flashover voltage of high voltage power transmission projects
GB/T 3048.11-1994 Test methods for determining electrical properties of electric cables and wires.Dielectric dissipation factor measurement
GB/T 13422-1992 Power semiconductor converters--Electrical test methods
GB/T 27601-2011 Test method of resisting stray current for industrial electric detonator
GB/T 3789.3-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of cathode emission current
GB/T 3789.4-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of reverse grids current
GB/T 37543-2019(英文版) Measurement method for total electric field strength and ion current density of DC transmission line and converter station
GB/T 3048.6-1994 Test methods for determining electrical properties of electric cables and wires.Determining insulation resistance.Voltmeter-ammeter method
GB/T 3048.8-1994 Test methods for determining electrical properties of electric cables and wires.A.C. voltage tests
GB/T 13422-2013 Semiconductor converters.Electrical test methods
GB/T 12966-1991 The method for electrical conductivity measurement of aluminium alloys by use of eddy current
GB/T 12966-2008 The method for determining aluminum alloys conductivity using eddy current
GB/T 3925-1983 Acceptance inspection of class 2 alternating current watt-hour meters
GB/T 3789.5-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid thermo-emission current
GB/Z 36517-2018 Rolling bearings.Methods for calculating the modified reference rating life for universally loaded bearings
GB/T 6495.4-1996 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices

PL-PKN, Current correction method

PN T01504-21-1987 Transistors Measurint! methods Forward current transfer ratio /!2i, at Iow fre?uency
PN E06204-1993 Test methods for direct arc furnaces
PN T04830-05-1985 Electronic tubes Colour picture tubes Methods of measurement of filament current, anod? current and cathode current
PN E06109-1968 Alterna?ing curren? over-curren? releoses General requir?ment and testing procedur?

RU-GOST R, Current correction method

GOST R 50689-1994 Soils. Determination of mobile compounds of molibdenum by Grigg method modified by CINAO
GOST 19438.12-1975 Low-power electronic tubes and valves. Methods of measurement of plate current and currents of grids having positive potential
GOST R IEC 60891-2013 State system for ensuring the uniformity of measurements. Photovoltaic devices. Procedures for temperature and irradiance corrections to measured current voltage characteristics
GOST 21803.3-1976 Vacuum enclosed prove tubes. Method of measurement of current of grid having positive potential with respect to cathode
GOST R 50685-1994 Soils. Determination of mobile compounds of manganese by Krupsky and Alexandrova method modified by CINAO
GOST R 50682-1994 Soils. Determination of mobile compounds of manganese by Peive and Rinkis method modified by CINAO
GOST R 50684-1994 Soils. Determination of mobile compounds of copper by Peive and Rinkis modified by CINAO
GOST R 50686-1994 Soils. Determination of mobile compounds of zinc by Krupsky and Alexandrova method modified by CINAO
GOST R 50687-1994 Soils. Determination of mobile compounds of cobalt by Paive and Rinkis method modified by CINAO
GOST R 50688-1994 Soils. Determination of mobile compounds of boron by Berger and Truog method modified by CINAO
GOST R 50683-1994 Soils. Determination of mobile compounds of copper and cobalt by Krupsky and Aleksndrova method modified by CINAO
PNST 80-2016 Automobile roads of general use. Petroleum-based bitumen binders. Method for determination of the volume of amendments, correction to a base temperature
GOST 28976-1991 Photovoltaic devices of crystalline silicon. Procedures for temperature and irradiance corrections to measured current voltage characteristics
GOST 21316.2-1975 Photocells. Method of dark current measurement
GOST R IEC 60990-2010 Metods of measurement of touch current and protective conductor current
GOST 21342.9-1976 Varistors. Method of measuring voltage and current
GOST 18986.3-1973 Semiconductor diodes. Method of measuring of direct forward voltage and direct forward current
GOST 21059.6-1979 Monochrome and colour TV picture tubes. Measurement techniques of heater current, anode current and cathode current
GOST 21011.3-1977 High-voltage kenotrons. Heater current measuring method
GOST 21011.7-1980 High-voltage kenotrons. The emission current measurement method
GOST 18986.1-1973 Semiconductor diodes. Method for measuring direct reverse current
GOST 11612.4-1984 Photomultipliers. Measuring method of dark anode current
GOST 8.449-1981 State system for ensuring the uniformity of measurements. D. c. bridges. Methods and means of calibration
GOST 18986.9-1973 Semiconductor diodes. Method for measuring pulse direct voltage and forword recovery time
GOST 18720.9-1976 Television camera tubes. Methods of measurement for dark current and dark current nonuniformity
GOST 8.550-1986 State system for ensuring the uniformity of measurements. State special standard and state verification schedul for means of measuring sinusoidal current ratio
GOST 29284-1992 Current sources primary. Control methods of electric parameters

Aeronautical Radio Inc., Current correction method

ARINC 640 ITEM 7.0-1997 Process to Detect and Correct Anomalies

Korean Agency for Technology and Standards (KATS), Current correction method

KS C IEC 62585-2017(2022) Electroacoustics ― Methods to determine corrections to obtain the free-field response of a sound level meter
KS C 0240-1998 Basic environmental testing procedures Part 2 : Tests Test Fc and guidance : Vibration (sinusoidal)
KS C 6111-6-2009(2020) Measurement method for the DC critical current of superconducting power cables
KS C 6111-6-2009 Measurement method for the DC critical current of superconducting power cables
KS C IEC 60990:2003 Method of measurement of touch current and protective conductor current
KS C IEC 60990:2020 Method of measurement of touch current and protective conductor current
KS R 1039-2005 Inspection of DC generators for automobiles
KS R 1039-2005(2010) Inspection of DC generators for automobiles
KS R 1039-1980 Inspection of DC generators for automobiles
KS C IEC 60793-1-50-2003(2018)
KS C 0248-59-2001 Environmental testing－Part 2：Test methods－ Test Fe : Vibration－Sine-beat method

CZ-CSN, Current correction method

CSN 35 8757 Cast.6-1985 Measuring method of static value of the common-emitter forward ourrent transfer ratio
CSN 35 8757 Cast.7-1985 Transistors. Measuring method of absolute value of forward current transfer ratio and transition frequency
CSN 35 8757 Cast.2-1985 Transistors. Measuring method of common-emitter small-signal short-circuit forward current transfer ratio
CSN 35 8585 Cast.1-1984 Television picture tubes. Measuring method of heating current, anodě current and cathode current
CSN 35 6405-1983 DC electrical resistors Methods of verification
CSN 35 6421-1984 D.C. Potenciomotors. Methuds of vorification
CSN 35 8545-1968 Methods of measurement of electrode inverse currents of eleotronic tubes
CSN 35 8772-1970 Thyristors. Method of measuring holding current
CSN 35 8561-1966 Methods of measurement o? electrode currents of television picture tubes
CSN 34 6467-1986 Test method for determination of resistance of insulating materials to low-voltage, high-current d.c. arc
CSN 35 8534-1968 Methods of testing oontrol grid currents of eleotronic tubes
CSN 35 6411-1987 DC bridges for resistance measuring Methods of verification
CSN 35 8579-1982 CAMERA TUBE Methods of signal current measurement
CSN 35 8580-1983 Television picture tubes. Measuring method of leakage current
CSN 35 6211-1984 Resistance type voltage divider DC. Methods of verification

Professional Standard - Electron, Current correction method

SJ 2215.3-1982 Method of measurement for forward current of semiconductor photocouplers (diodes)
SJ 1786-1981 Method of measurement for forward voltage of silicon single phase bridge rectifiers,up to 5A
SJ 452-1973 Methods of measurement for reverse current of high-voltage rectifier tubes
SJ 453-1973 Methods of measurement for pulse peak of rectifying current of high-voltage rectifier tubes
SJ 444-1973 Methods of measurement for anode current and anode current on underheated condition of high-voltage rectifier tubes
SJ 2138-1982 Methods of measurement for regulated current of silicon current regulator diodes
SJ/Z 1173-1977 Methods for determination of current efficiency of electroplating solution
SJ 2315-1983 Methods of measurement for d.c. digital voltmeters
SJ 2944-1988 Test method for ac digital voltmeter
SJ 1230-1977 Methods of measurement for high frequency rectified current of germanium detector diodes
SJ 2142-1982 Methods of measurement for current temperature coefficient of silicon current regulator diodes
SJ 20920-2005 General specification for the ionospheric refraction correction system for exterior ballistic measurement by differential Doppler
SJ 2354.4-1983 Method of measurement for forward voltage drop of PIN and avalanche photodiodes

AT-OVE/ON, Current correction method

OVE EN IEC 60038/A1 (Fragment 2):2020 Standard voltages for AC supply and AC equipment (Proposed horizontal standard) (IEC 8/1552/CDV) (Amendment)
OVE EN 50642/A1-2021 Cable management systems - Test method for content of halogens (english version) (Amendment)
OVE EN IEC 60038/A1 (Fragment 3):2020 Standard voltages for DC and AC traction systems (Proposed horizontal standard) (IEC 8/1553/CDV) (Amendment)
OVE EN 62920/A11-2021 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment (Amendment) (german version)
OVE EN 50342-1/A2-2021 Lead-acid starter batteries - Part 1: General requirements and methods of test (Amendment) (english version)
OVE EN IEC 61543/AA:2021 Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility (english version) (Amendment)
OVE EN 60700-2/A1-2021 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology (IEC 22F/607/CDV) (Amendment) (english version)
OVE EN 60763-2/A1-2021 Specification for laminated pressboard - Part 2: Methods of test (IEC 15/943/CDV) (Amendment) (english version)
OVE EN IEC 62751-1/A2:2021 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (IEC 22F/648/CDV) (english version) (Amendment)

CENELEC - European Committee for Electrotechnical Standardization, Current correction method

EN 60661:2001 Methods of Measuring the Performance of Electric Household Coffee Makers (Incorporates Amendment A1: 2003)
EN 60129:1994 Alternating Current Disconnectors and Earthing Switches (Incorporates Amendments A1: 1994 and A2: 1996)
EN 61036:1996 Alternating Current Static Watt-Hour Meters for Active Energy (Classes 1 and 2) (Incorporates Amendment A1: 2000)
EN 60705:2012 Household microwave ovens - Methods for measuring performance (Incorporates Amendment A1: 2014)
EN 60705:1999 Household Microwave Ovens - Methods for Measuring Performance (Incorporates Amendment A1: 2004)
EN 50342:2001 Lead-Acid Starter Batteries - General Requirements@ Methods of Test and Numbering (Incorporates Amendments A1: 2001@ A2: 2001 and A3: 2004; Incorporating Corrigendum March 2003)
EN 60851-6:1996 Winding Wires - Test Methods - Part 6: Thermal Properties (Incorporates Amendment A1: 1997)
EN 60851-3:2009 Winding wires - Test methods - Part 3: Mechanical properties (Incorporates Amendment A1: 2013)
EN 60851-3:1996 Winding Wires - Test Methods Part 3: Mechanical Properties (Incorporates Amendment A1: 1997)
EN 61347-2-2:2001 Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (Incorporates Amendment A2: 2006; Incorporating Corrigenda July 2003 and November 2006)
EN 60095-1:1993 Lead-Acid Starter Batteries - Part 1: General Requirements and Methods of Test (Incorporates Amendments A2: 1995@ A11: 1995 and A13: 1997)
EN 60749:1999 Semiconductor Devices - Mechanical and Climatic Test Methods (Incorporates Amendments A1: 2000 and A2: 2001)

Danish Standards Foundation, Current correction method

DS/ISO/IEC 10373-6/Amd 2:2013 Identification cards - Test methods - Part 6: Proximity cards - AMENDMENT 2: Test methods for electromagnetic disturbance
DS/EN 60990:2000 Methods of measurement of touch current and protective conductor current
DS/IEC 62873-1:2020 Amendment 1 – Residual current operated circuit-breakers for household and similar use – Part 1: Outline of blocks and modules for residual current device standards
DS/ISO/IEC 10373-6/Amd 1:2012 Identification cards - Test methods - Part 6: Proximity cards - AMENDMENT 1: Additional PICC classes
DS 3000:2021 Washable reusable community face coverings – Requirements and test methods – AMENDMENT 1
DS/EN ISO 16140/A1:2011 Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods - Amendment 1
DS/EN 60661/A2:2006 Methods for measuring the performance of electric household coffee makers (Amendment concerning the evaluation of hot steam function to froth-up milk and to heat-up water)
DS/EN ISO 21569/A1:2013 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Qualitative nucleic acid based methods - Amendment 1
DS/IEC 62999:2021 Amendment 1 – Electric room heating – Underfloor heating – Performance characteristics – Definitions, method of testing, sizing and formula symbols – Enhanced sustainable performance aspects

Indonesia Standards, Current correction method

SNI 1976-2008
SNI 04-6507.1 ADM 1-2006
SNI 03-6456.1-2000 Methods for river control during dam construction operations - Part 1: River control during dam construction operations
SNI 09-6522-2001 Alternators for automobiles - Test methods

International Organization for Standardization (ISO), Current correction method

ISO 8325:2023/AWI Amd 1:2011 Dentistry — Test methods for rotary instruments — Amendment 1
ISO 21727:2016/AWI Amd 1 Cinematography — Method of measurement of perceived loudness of short duration motion-picture audio material — Amendment 1
ISO/DIS 13100 Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials
ISO 20344:2021/DAmd 1 Personal protective equipment — Test methods for footwear — Amendment 1
ISO 10033-1:2011/CD Amd 1 Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods — Amendment 1
ISO/DIS 26101-2 Acoustics — Test methods for the qualification of the acoustic environment — Part 2: Determination of the environmental correction
ISO/CD 16281 Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings
ISO/DIS 16281:2023 Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings
ISO 14156:2001/Amd 1:2007 | IDF 172:2001/Amd 1:2007 Milk and milk products — Extraction methods for lipids and liposoluble compounds — Amendment 1
ISO 16140-2:2016/CD Amd 1 Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method — Amendment 1
ISO/TR 6817:1980 Measurement of conductive fluid flowrate in closed conduits — Method using electromagnetic flowmeters
ISO 9022-2:2015/DAmd 1 Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity — Amendment 1
ISO 9022-2:2015/Amd 1:2023 Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity — Amendment 1
ISO 9022-2:2015/PRF Amd 1 Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity — Amendment 1

ES-UNE, Current correction method

UNE-EN ISO 13297:2021/A1:2023 Small craft - Electrical systems - Alternating and direct current installations - Amendment 1 (ISO 13297:2020/Amd 1:2022)
UNE-EN ISO 8973:1999/A1:2020 Liquefied petroleum gases - Calculation method for density and vapour pressure - Amendment 1 (ISO 8973:1997/Amd 1:2020)
UNE-EN 60990:2016 Methods of measurement of touch current and protective conductor current (Endorsed by AENOR in October of 2016.)
UNE-EN ISO 11118:2016/A1:2020 Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods - Amendment 1 (ISO 11118:2015/Amd 1:2019)
UNE-EN ISO 24444:2020/A1:2022 Cosmetics - Sun protection test methods - In vivo determination of the sun protection factor (SPF) - Amendment 1 (ISO 24444:2019/Amd 1:2022)

European Committee for Standardization (CEN), Current correction method

EN 24185:1993/AC:1993 Measurement of liquid flow in closed conduits; weighing method (ISO 4185:1990); amendment
EN ISO 19110:2006/A1:2011 Geographic information - Methodology for feature cataloguing - Amendment 1 (ISO 19110:2005/AMD 1:2011)
EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety

American Gear Manufacturers Association, Current correction method

AGMA 04FTM3-2004 A Method to Define Profile Modification of Spur Gear and Minimize the Transmission Error

AT-ON, Current correction method

OENORM EN 589/A1-2021 Automotive fuels - LPG - Requirements and test methods (Amendment)
OENORM EN 15734-2/A1-2021 Railway applications - Braking systems of high speed trains - Part 2: Test methods (Amendment)
OENORM EN 1527/A1-2021 Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods (Amendment)
OENORM EN ISO 21644:2021 Solid recovered fuels - Methods for the determination of biomass content (ISO 21644:2021, corrected version 2021-03)

Canadian Standards Association (CSA), Current correction method

CAN/CSA-ISO/IEC 18033-4A AMD 1:2021 Amendment 1:2021 to CAN/CSA-ISO/IEC 18033-4:13, Information technology - Security techniques - Encryption algorithms - Part 4: Stream ciphers - Amendment 1: ZUC (Adopted amendment 1:2020 to ISO/IEC 18033-4:2011)
CAN/CSA-E61347-2 AMD 1-2005 Amendment 1 Lamp controlgear – Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps (First Edition)
CAN/CSA-ISO/IEC 10373A-6:2012 Identification cards - Test methods - Part 6: Proximity cards AMENDMENT 1: Additional PICC classes
CAN/CSA-ISO/IEC 10118-1A AMD 1:2021 Amendment 1:2021 to CAN/CSA-ISO/IEC 10118-1:18, Information technology - Security techniques - Hash-functions - Part 1: General - Amendment 1: Padding methods for sponge functions (Adopted amendment 1:2021 to ISO/IEC 10118-1:2016)
CSA C381.1-08-2008 Test method for calculating the energy efficiency of single-voltage external ac-dc and ac-ac power supplies First Edition
CSA CISPR 11-2019 Amendment 2:2021 to CSA CISPR 11:19, Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Adopted amendment 2:2019 to IEC CISPR 11:2015)
CSA CISPR 11B AMD 2-2021 Amendment 2:2021 to CSA CISPR 11:19, Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Adopted amendment 2:2019 to IEC CISPR 11:2015)
CSA ISO/IEC 10373-6B AMD 2:2021 Amendment 2:2021 to CSA ISO/IEC 10373-6:21, Cards and security devices for personal identification - Test methods - Part 6: Contactless proximity objects - Amendment 2: Enhancements for harmonization (Adopted amendment 2:2020 to ISO/IEC 10373-6:2020)
CAN/CSA-CEI/IEC CISPR 11 AMD 2:2010 Amendment 2 Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement (First Edition)
CAN/CSA-CEI/IEC CISPR 11:2010 Amendment 2 Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement (First Edition)
CAN/CSA-CEI/IEC CISPR 11 AMD 1:2010 Amendment 1 Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement (First Edition)

British Standards Institution (BSI), Current correction method

BS EN 60700-1:2015+A1:2021 Amendment 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - - Part 1: Electrical testing
23/30433745 DC BS ISO 13100. Methods for zeta potential determination. Streaming potential and streaming current methods for porous materials
BS EN 2591-428:2002 Elements of electrical and optical connection - Test methods - Sinusoidal vibrations with passage of current for crimped terminal lugs
BS EN 60990:2000 Methods of measurement of touch current and protective conductor current
BS EN 50289-1-2:2001 Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance
BS EN ISO 15681-2:2004 Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Method by continuous flow analysis (CFA)
BS 4119:1967 Method of measurement of current noise generated in fixed resistors
BS EN 60195:2016 Method of measurement of current noise generated in fixed resistors
DD ISO/TS 16281:2008 Rolling bearings. Methods for calculating the modified reference rating life for universally loaded bearings
BS EN 60990:2016 Tracked Changes. Methods of measurement of touch current and protective conductor current
BS 5704:1979 Method for specifying the performance of digital electronic d. c. voltmeters and d.c. electronic analogue-to-digital convertors
BS EN ISO 15681-2:2018 Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Method by continuous flow analysis (CFA)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Current correction method

IEEE C37.04A-2003 IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 1: Capacitance Current Switching
IEEE C37.013A-2007 AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis Amendment 1: Supplement for Use with Generators Rated 10–100 MVA
IEEE 269A-2007 Standard for Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets@ Handsets@ and Headsets Amendment 1
IEEE C63.4-1991 METHODS OF MEASUREMENT OF RADIO-NOISE EMISSIONS FROM LOW-VOLTAGE ELECTRICAL AND ELECTRONIC EQUIPMENT IN THE RANGE OF 9 KHZ TO 40 GHZ; CORRECTION SHEET - 1991
IEEE C37.13-2012 Low-Voltage AC Power Circuit Breakers Used in Enclosures Amendment 1: Increase of Voltages to 1000 V AC and Below
IEEE C37.13A-2012 Low-Voltage AC Power Circuit Breakers Used in Enclosures Amendment 1: Increase of Voltages to 1000 V AC and Below
IEEE C62.11A-2008 Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV) Amendment 1: Short-Circuit Tests for Station@ Intermediate@ and Distribution Arresters
IEEE 1013-1990 Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) Systems (Correction Sheet - 1991)
IEEE C37.110 CORR 1-2010 Guide for the Application of Current Transformers Used for Protective Relaying Purposes Corrigendum 1: Corrections to Equation 18 and Equation 19
IEEE C57.110-1986 Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE C57.110 ERTA-2002 Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE C57.110-1998 Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE 158-1962 STANDARD METHODS OF TESTING ELECTRON TUBES; CORRECTIONS - DECEMBER 1965
IEEE C37.04B-2008 Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100

NATO - North Atlantic Treaty Organization, Current correction method

STANAG 4133-1992 Method of Specifying Electrical Power Supplies: Standard Types of Electrical Power (ED 2 AMD 1 Amendment 1@ 11/27/95; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@
STANAG 2346-1975 Standard Method of Writing Prescriptions for Spectacles (ED 1 AMD 5 Amendment 5: 1986)
STANAG 3303-1986 Connectors for 115/200 Volts@ 400 Hertz@ 3 Phase@ AC Servicing Power (ED 3 AMD 5 Amendment 5@ 10/21/93; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)
STANAG 3275-1997 Method of Warning Own Aircraft of (Suspected) Enemy Fighter Attacks (ED 3; Amendment 1@ 11/28/97; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 70
STANAG 4170-1985 Principles and Methodology for the Qualification of Explosive Materials for Military Use (ED 1; Amendment 1: 10/22/1985)
STANAG 2048-1982 Chemical Methods of Insect and Rodent Control (AMedP-3) (ED 2 AMD 2 Amendment 2: 1986)

Professional Standard - Machinery, Current correction method

JB/T 7608-1994 Test method and limit value of dielectric loss tangent of high voltage AC motor coil
JB/T 7608-2006 Test method for measuring loss tangent of high voltage alternating current dynamo coil and limit value
JB/T 9478.6-1999 Measuring methods of photocell - Dark current
JB/T 9478.4-1999 Measuring methods of photocell - Illumination-current characteristic
JB/T 3114-1997 Test method of D.C.industrial and mining electric locomotive
JB/T 5540-1991 DC high resistance resistor. Test method
JB/T 6155.5-2007 Servicing directives for electrostatic copying machine.Managing methods of servicing information
JB/T 6155.5-1992 Maintenance guideline for electrostatic copiers Maintenance information management method
JB/T 6155.6-1992 Maintenance guidelines for electrostatic copiers Maintenance equipment management methods
JB/T 9478.7-1999 Measuring methods of photocell - Dark current temperature characteristic
JB/T 9478.6-2013 Photovoltaic Cell Measurement Methods Part 6: Dark Current

Professional Standard - Textile, Current correction method

FZ/T 10013.2-1999 Corrected method for breaking strength of pure and blended products of cotton,chemical fibres to temperature and regain.Corrected method for breaking strength of grey fabries
FZ/T 10013.3-1999 Corrected method for breaking strength of pure and blended products of cotton,chemical fibres to temperature and regain.Corrected method for breaking strength of printed and dyed fabrics
FZ/T 10013.2-2011 Corrected method for breaking strength of pure and blended products of cotton,chemical fibres to tmperature and regain. Corrected method for breaking strength of grey fabrics
FZ/T 10013.3-2011 Corrected method for breaking strength of pure and blended products of cotton,chemical fibres to temperature and regain.Corrected method for breaking strength of printed and dyed fabrics
FZ/T 10013.1-1999 Corrected method for breaking strength of pure and blended products of cotton,chemical fibres to temperature and regain.Corrected method for breaking strength of grey yarns,dyed and finished yarns
FZ/T 10013.1-2011 Corrected method for breaking strength of pure and blended products of cotton,chemical fibres to temperature and regain.Corrected method for breaking strength of grey yarns,dyed and finished yarns

Canadian General Standards Board （CGSB), Current correction method

CGSB 18-GP-4A-1966 Methodes d'enchantillonnage des livraisons de charbon
CGSB 1-GP-71-1974 Methodes D'Essai Des Peintures Et Pigments R閕mprim閑 en octobre 1983; Incorpore les modifica頸fs noe 1 B 12 et le suppl閙ent no 1
CGSB 4.2 NO. 12.1-M90-CAN/CGSB-1990 Methodes Pour Epreuves Textiles Resistance A La Dechirure - Methode A Dechirure Simple
CGSB 4.2 NO. 12.2-95-CAN/CGSB-1995 Methodes Pour Epreuves Textiles Resistance A La Dechirure - Methode Trapezoidale
CGSB 1-GP-71 METH 123.2-1979 Methodes D'Essai Des Peintures Et Pigments Caracteristiques De Scellement Modifiee En Septembre 1980; Reeditee En Septembre 1982
CGSB 3.0 NO. 15.0-02-CAN/CGSB-2002 Methodes d'essai des produits petroliers et produits connexes methode normalisee de dosage des hydrocarbures aromatiques, en fonction du nombre de cycles, dans les distillats moyens de petrole, par chromatographie en fluide supercritique
CGSB 4.2 NO. 59.1-M88-CAN/CGSB-1988 Textiles Test Methods Appearance After Repeated Domestic Launderings - Smoothness of Fabrics
CGSB 1-GP-71 METH 109.2-1979 Methods of Testing Paints and Pigments Oil Resistance Lacquers on Primed Aluminum Amended September 1980; Re-Edited September 1982
CGSB 4.2 NO. 27.7-M89-CAN/CGSB-1989 Textile Test Methods Combustion Resistance of Mattresses - Cigarette Test Amendment 1: April 2002

ZA-SANS, Current correction method

SANS 5115:2005 Fluidity of cotton and certain cellulosic man-made fibres in cuprammonium solution (modified method)

IX-IX-IEC, Current correction method

IEC 62751-2:2014/AMD2:2023 Amendment 2 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters

Taiwan Provincial Standard of the People's Republic of China, Current correction method

CNS 3629-1989 Basic Environmental Testing Procedures Part 2: Tests, Test Fc and Guidance : Vibration (Sinusoidal)

European Committee for Electrotechnical Standardization（CENELEC）, Current correction method

EN 61628-2:1999 Corrugated pressboard and presspaper for electrical purposes Part 2: Methods of test (Incorporates Amendment A1: 2007)
EN 60350-2:2013 Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance (Incorporates Amendment A11: 2014; Remains Current)
EN 60990:2016 Methods of measurement of touch current and protective conductor current
EN 50294:1998 Measurement Method of Total Input Power of Ballast-Lamp Circuits Includes Amendments A1:2001 and A2:2003
EN 60990:1999 Methods of Measurement of Touch Current and Protective Conductor Current

Lithuanian Standards Office , Current correction method

LST ISO 696:1997 Surface active agents. Measurement of foaming power. Modified Ross-Miles method
LST EN ISO 19110:2006/A1:2011 Geographic information - Methodology for feature cataloguing - Amendment 1 (ISO 19110:2005/Amd.1:2011)
LST EN ISO 20471:2013 High visibility clothing - Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01)
LST HD 60364-4-43-2010 Low-voltage electrical installations -- Part 4-43: Protection for safety - Protection against overcurrent (IEC 60364-4-43:2008, modified + corrigendum Oct. 2008)
LST EN 60990-2002 Methods of measurement of touch current and protective conductor current (IEC 60990:1999)
LST EN 62552-2013 Household refrigerating appliances - Characteristics and test methods (IEC 62552:2007, modified + corrigendum Mar. 2008)
LST EN 61243-2+A1-2000 Live working - Voltage detectors -- Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. (IEC 61243-2:1995 + corrigendum Jun. 1996 (Modified)
LST EN ISO 12402-9:2006/A1:2011 Personal flotation devices - Part 9: Test methods - Amendment 1 (ISO 12402-9:2006/Amd.1:2011)

American National Standards Institute （ANSI), Current correction method

ANSI/SCTE 46-2007 Test Method for AC to DC Power Supplies
ANSI/SCTE 166-2010 Flexure Method for Drop Cable Conditioning
ANSI/ASTM A966:1996 Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current

Society of Automotive Engineers (SAE), Current correction method

SAE J425-1991 Electromagnetic Testing by Eddy Current Methods

ANSI - American National Standards Institute, Current correction method

INCITS/ISO/IEC 10373-6 AMD 1:2007 Identification cards — Test methods — Part 6: Proximity cards — Amendment 1: Protocol test methods for proximity
INCITS/ISO/IEC 10373-6 AMD 4:2006 Identification cards — Test methods — Part 6: Proximity cards — Amendment 4: Additional test methods for PCD RF
INCITS/ISO/IEC 10373-6 AMD 2:2003 Identification cards - Test methods - Part 6: Proximity cards AMENDMENT 2: Improved RF test methods (Adopted by INCITS)

AGMA - American Gear Manufacturers Association, Current correction method

04FTM3-2004 A Method to Define Profile Modification of Spur Gear and Minimize the Transmission Error

TH-TISI, Current correction method

TIS 2525-2011 Methods of measurement of touch current and protective conductor current

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Current correction method

GB/T 35715-2017 Calculation methods for short-circuit current of DC electrical system on ship
GB/T 33339-2016 Vanadium flow battery system─Test method

RO-ASRO, Current correction method

STAS SR CEI 990-1995 Methods of measurement of touch-current and protective conductor current

Standard Association of Australia （SAA）, Current correction method

AS IEC 60990:2018 Methods of measurement of touch current and protective conductor current
IEC 60840:2020/AMD1:2023 Amendment 1 — Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) — Test methods and requirements
AS/NZS 4268/AMD 1:2005 Amendment No.1 to AS/NZS 4268-2003 Radio equipment and systems--Short range devices--limits and methods of measurement
IEC 63086-1:2020/AMD1:2023 Amendment 1 — Household and similar electrical air cleaning appliances — Methods for measuring the performance — Part 1: General requirements
IEC 62333-2/AMD1:2015 Amendment 1 — Noise suppression sheet for digital devices and equipment — Part 2: Measuring methods

Electronic Components, Assemblies and Materials Association, Current correction method

ECA EIA-364-04A-2002 TP-04A Normal Force Test Procedure for Electrical Connectors

NZ-SNZ, Current correction method

NZS 3112.1:1986 Methods of Test for Concrete Part 1: Tests Relating to Fresh Concrete (Incorporating Amendment 1: 05/1986 ; Amendment 2: 06/2007)
NZS 3112.2:1986 Methods of Test for Concrete Part 2: Tests Relating to the Determination of Strength of Concrete (Incorporating Amendment 1: 03/1988 and Amendment 2: 07/2000)
AS/NZS 1660.2.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 2.4: Insulation, Extruded Semi-Conductive Screens and Non-Metallic Sheaths - Methods Specific to Polyethylene and Polypropylene Materials (Incorporating Amendment 1: 07/2001)
AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)
AS/NZS 4665.1:2005 Performance of external power supplies Part 1: Test method and energy performance mark (Incorporating Amendment No. 1: February 2009)
NZS 3112.3:1986 Methods of Test for Concrete Other Than Strength (Incorporating Amendment No. 1: May 1986)

SE-SIS, Current correction method

SIS SS-IEC 676:1992 Test methodsfor direct arcfurnaces
SIS 20 03 09

International Telecommunication Union (ITU), Current correction method

ITU-T A.7 AMD 1-2006 Focus groups: Working methods and procedures Amendment 1: Single type of input contribution
ITU-T G.806 AMD 1-2011 (Pre-Published) Characteristics of Transport Equipment ?Description Methodology and Generic Functionality Amendment 1
ITU-T G.663 AMD 1-2003 Application related aspects of optical amplifier devices and subsystems Amendment 1: Amendments to Appendix II Study Group 15
ITU-T E.123 AMD 1 CHINESE-2008 Notation for national and international telephone numbers, e-mail addresses and Web addresses Amendment 1
ITU-T M.3020 AMD 1-2014 Management interface specification methodology - Amdentment 1: Indication of naming attribute in analysis template

KR-KS, Current correction method

KS C IEC 60990-2020 Method of measurement of touch current and protective conductor current

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Current correction method

IPC TM-650 2.5-1998 Electrical Test Methods Revision Q
IPC 2581-2004 Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology Incorporates Amendment 1: 5/2007

IPC - Association Connecting Electronics Industries, Current correction method

IPC TM-650 2.5-2007 Electrical Test Methods (Revision X)
IPC TM-650 2.5.5.3C-1987 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method)

AENOR, Current correction method

UNE-EN ISO 14460/A1:2002 Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods. Amendment 1: Modified flexion test. (ISO 14460:1999/Amd 1:2002)
UNE-EN ISO 20471:2013/A1:2017 High visibility clothing - Test methods and requirements - Amendment 1 (ISO 20471:2013/Amd 1:2016)
UNE-EN ISO 12402-9:2007/A1:2011 Personal flotation devices - Part 9: Test methods - Amendment 1 (ISO 12402-9:2006/Amd 1:2011)

Professional Standard - Railway, Current correction method

TB/T 1704-2001 Test methods for locomotive motors DC motors
TB/T 2525-1995 Test method for active current of electric locomotive
TB/T 2524-1995 Test method for electric locomotive power supply current characteristics

国家能源局, Current correction method

NB/T 42082-2016 All-vanadium redox flow battery electrode testing method
NB/T 10460-2020 Test method for zinc-nickel flow battery stack
NB/T 42132-2017 All-vanadium redox flow battery stack testing method
NB/T 10288-2019 Highly accelerated life test method for AC-DC switching power supply

工业和信息化部, Current correction method

JB/T 14257-2022 Test method for zinc-bromine flow battery stack
SJ/T 11794-2022 Test method for free lithium in lithium-ion battery cathode materials

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Current correction method

ITU-T K.44 AMD 2-2015 Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents – Basic Recommendation Amendment 2 (Study Group 5)
ITU-T P.501 AMD 1-2018 Test signals for use in telephonometry Amendment 1 (Study Group 12)
ITU-T Y.1366 AMD 1-2018 Time and phase synchronization aspects of telecommunication networks Amendment 1 (Study Group 15)
ITU-T G.8271 AMD 1-2018 Time and phase synchronization aspects of telecommunication networks Amendment 1 (Study Group 15)
ITU-T E.802 AMD 2-2018 Framework and methodologies for the determination and application of QoS parameters Amendment 2 (Study Group 12)
ITU-T E.802 AMD 1-2017 Framework and methodologies for the determination and application of QoS parameters Amendment 1 (Study Group 12)

National Metrological Technical Specifications of the People's Republic of China, Current correction method

JJF(航空) 037-1988 Verification method of DC temperature measuring bridge
JJF(电子) 02-1982 Verification method of DC digital voltmeter

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Current correction method

GJB 3196.40A-2005 Test methods of cartridge.Part 40:Correction factor measurement of powder,temperature to chamber pressure
GJB 3196.39A-2005 Test methods of cartridge.Part 39:Correction factor measurement of powder temperayure to velocity

BE-NBN, Current correction method

NBN-EN 28325-1992 Dentistry. Dental rotary instruments. Test methods (ISO 8325:1985)
NBN-EN 29283-1993 Manipulating industrial robots. Performance criteria and related test methods (ISO 9283: 1990 including Amendment 1: 1991)

未注明发布机构, Current correction method

DIN EN ISO 10133 A100:2017 Small vessels – Electrical systems – Low voltage direct current (DC) systems (ISO 10133:2012); German version EN ISO 10133:2017; Amendment A100
ISO/TS 16281:2008 Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings

国家市场监督管理总局、中国国家标准化管理委员会, Current correction method

GB/T 20114-2019 Specific test methods for d.c. machines on conventional and rectifier-fed supplies
GB/T 37617-2019 Test methods for Zeta potential of nanofiltration membrane surface—Streaming potential measurement

AR-IRAM, Current correction method

IRAM 2128-1956

European Association of Aerospace Industries, Current correction method

AECMA PREN 2591-D28-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D28 - Sinusoidal Vibrations with Passage of Current for Lugs and in-Line Splices
AECMA PREN 2591-428-1995 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 428: Sinusoidal Vibrations with Passage of Current for Crimped Terminal Lugs Edition P 1

Professional Standard - Electricity, Current correction method

DL/T 2038-2019 Measurement method of DC magnetic field in HVDC transmission project

IET - Institution of Engineering and Technology, Current correction method

ANLG IC DES-1993 Analogue IC Design: The Current-Mode Approach

AIA/NAS - Aerospace Industries Association of America Inc., Current correction method

NAS728-1981 Test Methods for Electromagnetic Relays (Rev 1)

Professional Standard - Chemical Industry, Current correction method

HG/T 4293-2012 Determination of color motion picture positive film sensitivity speed and gamma

机械电子工业部, Current correction method

JB 5856-1991 Current relay test procedures and test methods

SG-SPRING SG, Current correction method

SS 492 AMD 1-2014 Specification for performance requirements for strength and robustness (including methods of test) for partition walls (Amendment No.1)

Group Standards of the People's Republic of China, Current correction method

T/CAS 529-2021 Test methods of conductor DC resistance for short samples of electric cables and wires
T/CSEE 0213-2021 Test methods for low-voltage three-level AC/DC, DC/DC bidirectional converters

Beijing Provincial Standard of the People's Republic of China, Current correction method

DB11/T 175-2003 Measurement and calculation methods of electricituy balance for electrical commutate installation

ECIA - Electronic Components Industry Association, Current correction method

214-1958 Calculation of Current Ratings on Hookup Wire@ Method for

Sichuan Provincial Standard of the People's Republic of China, Current correction method

DB51/T 1762-2014 General detection method of AC and DC resistance box
DB51/T 2191-2016 General testing method for vanadium redox flow battery

CEN - European Committee for Standardization, Current correction method

EN 471:2003/A1:2003 High-visibility warning clothing for professional use - Test methods and requirements (Incorporates Amendment A1: 2007)