ZH
RU
ES

reversible specific capacity

reversible specific capacity, Total:317 items.

In the international standard classification, reversible specific capacity involves: Electrical engineering in general, Plastics, Data storage devices, Electrical accessories, Conducting materials, Packaging materials and accessories, Petroleum products in general, Environmental testing, Electrical and electronic testing, Semiconductor devices, Products of the textile industry, Nuclear energy engineering, Earth-moving machinery, Measurement of volume, mass, density, viscosity, Soil quality. Pedology, Water quality, Thermodynamics and temperature measurements, Fluid storage devices, Beverages, Testing of metals, Non-destructive testing, Applications of information technology, Power transmission and distribution networks, Protection against fire, Geology. Meteorology. Hydrology, Textile fibres, Acoustics and acoustic measurements, Laboratory medicine, Energy and heat transfer engineering in general, Audio, video and audiovisual engineering, Barrels. Drums. Canisters, Special purpose vehicles, Installations in buildings, Pharmaceutics, Linear and angular measurements, Powder metallurgy, Wastes, Tea. Coffee. Cocoa, Integrated circuits. Microelectronics, Reinforced plastics, Paper and board, Technical drawings, Ceramics, Construction materials, Quality, Analytical chemistry, Air quality, Measurement of fluid flow, Capacitors, Electricity. Magnetism. Electrical and magnetic measurements, Measurement of force, weight and pressure, Aerosol containers, Farming and forestry, Protection of and in buildings, Protection against dangerous goods, Non-ferrous metals, Refractories, Valves, Industrial automation systems, Inorganic chemicals, Cinematography, Particle size analysis. Sieving, Fibre optic communications, Agricultural machines, implements and equipment.

SE-SIS, reversible specific capacity

SIS 01 60 11-1967 Volume. Mass density. Specific volume

British Standards Institution (BSI), reversible specific capacity

BS IEC TR 63401-1:2022 Dynamic characteristics of inverter-based resources in bulk power systems - Interconnecting inverter-based resources to low short circuit ratio AC networks
PD IEC TR 63401-4:2022 Dynamic characteristics of inverter-based resources in bulk power systems. Behaviour of inverter-based resources in response to bulk grid faults
BS EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Determination of specific heat capacity
BS EN ISO 11357-4:2014 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
BS EN ISO 11357-4:2021 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
BS ISO 19935-2:2020 Plastics. Temperature modulated DSC. Measurement of specific heat capacity cp
BS 5045-6:1987 Transportable gas containers - Specification for seamless containers of less than 0.5 litre water capacity
BS 5045-2:1989 Transportable gas containers - Specification for steel containers of 0.5 L up to 450 L water capacity with welded seams
BS 7181:1990 Specification for storage cisterns up to 500 L actual capacity for water supply for domestic purposes
BS 7181:1989 Specification for storage cisterns up to 500 L actual capacity for water supply for domestic purposes
PD IEC TR 63401-2:2022 Dynamic characteristics of inverter-based resources in bulk power systems. Sub- and super-synchronous control interactions
BS EN 15132:2006 Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods
BS EN 15132:2007 Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods
BS ISO/IEC 14517:1997 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2,6 Gbytes per cartridge
BS EN 13025-3:2005 Packaging — Light gauge metal containers — Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 13025-3:2006 Packaging. Light gauge metal containers. Removable head (open head) round steel and tinplate containers with a no minal capacity of 20000 ml, 25000 ml and 30000 ml
BS ISO 21029-1:2018+A1:2019 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume - Design, fabrication, inspection and tests
BS EN ISO 2692:2014 Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN ISO 2692:2007 Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN ISO 2692:2006 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN 13025-2:2005 Packaging — Light gauge metal containers — Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 13025-2:2006 Packaging. Light gauge metal containers. Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
BS 5045-7:2000 Transportable gas containers - Specification for seamless steel gas containers of water capacity 0.5 L up to 15 L for special portable applications
BS ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
20/30406588 DC BS EN ISO 11357-4. Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
BS EN 13071-1:2019 Tracked Changes. Stationary waste containers up to 5 000 l, top lifted and bottom emptied. General requirements
BS 9090:1977 Variable capacitors of assessed quality: generic data and methods of test
BS 5597:1991 Specification for non-refillable plastics aerosol dispensers up to 1000 mL capacity
PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
BS EN ISO 20848-1:2007 Packaging. Plastics drums. Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l
BS EN ISO 20848-1:2008 Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l
BS EN 16842-5:2021 Powered industrial trucks. Visibility. Test methods and verification. Industrial variable-reach trucks greater than 10 000 kg capacity
BS EN 61280-2-4:1998 Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Bit-rate tolerance measurement
BS ISO 24144:2023 Thermal insulation. Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range. Differential scanning calorimetry (DSC) method

Japan Electronics and Information Technology Industries Association, reversible specific capacity

EIAJ RCR-2360A-2000 Reliability Reports of Aluminium Electrolytic Capacitors for General Inverters

International Electrotechnical Commission (IEC), reversible specific capacity

IEC TR 63401-1:2022 Dynamic characteristics of inverter-based resources in bulk power systems - Part 1: Interconnecting inverter-based resources to low short circuit ratio AC networks
IEC White Paper RE-EES:2012 Grid integration of large-capacity Renewable Energy sources and use of large-capacity Electrical Energy Storage
IEC TR 63401-4:2022 Dynamic characteristics of inverter-based resources in bulk power systems - Part 4: Behaviour of inverter-based resources in response to bulk grid faults
IEC TR 63401-2:2022 Dynamic characteristics of inverter-based resources in bulk power systems - Part 2: Sub- and Super-synchronous control Interactions

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., reversible specific capacity

ASHRAE 4149-1998 Effectiveness of a Municipal Ground-Coupled Reversible Heat Pump System Compared to an Air-Source System
ASHRAE 3735-1994 Relationships between Irreversibility@ Energy Destruction@ and Entropy Generation for Systems and Components
ASHRAE SE-99-19-03-1999 Alternative Approach to Measuring the Critical Flammability Ratio of R-125/R-32

Professional Standard - Electron, reversible specific capacity

SJ/T 31492-1995 Comparable unit output energy consumption quota for capacitor manufacturing products
SJ/T 31481-1995 Comparable unit output energy consumption quota for micromotor manufacturing products
SJ/T 31473-1995 Comparable unit output energy consumption quota for relay manufacturing products
SJ/T 31476-1995 Energy Consumption Quotas for Comparable Unit Output of Radar Machine Manufacturing Products
SJ/T 31488-1995 Comparable unit output energy consumption quota for integrated circuit manufacturing products
SJ/T 31491-1995 Comparable unit output energy consumption quota for electronic cable manufacturing products
SJ/T 31470-1995 Energy Consumption Quotas for Comparable Unit Output of Color Picture Tube Manufacturing Products
SJ/T 31475-1995 Energy consumption quota for comparable unit output of color TV manufacturing products
SJ/T 31486-1995 Comparable unit output energy consumption quota for alkaline storage battery manufacturing products
SJ/T 31471-1995 Comparable unit output energy consumption quota for electric vacuum device manufacturing products
SJ/T 31490-1995 Comparable unit output energy consumption quota for piezoelectric quartz crystal manufacturing products
SJ/T 31478-1995 Comparable unit output energy consumption quota for automobile radio and player manufacturing products
SJ/T 31484-1995 Comparable unit output energy consumption quota for electronic ceramic parts manufacturing products
SJ/T 31472-1995 Comparable unit output energy consumption quota for TV tuner manufacturing products
SJ/T 31489-1995 Comparable unit output energy consumption quota for semiconductor discrete device manufacturing products
SJ/T 9551.4-1993 Type C film dielectric preset variable capacitors--Quality grading standard
SJ/T 9551.1-1993 Type A film dielectric variable tuning capacitors--Quality grading standard
SJ/T 31483-1995 Energy Consumption Quotas for Comparable Unit Output of Electronic-Specific Tungsten and Molybdenum Material Manufacturing Products
SJ/T 31487-1995 Comparable unit output energy consumption quota for single- and double-sided printed circuit board manufacturing products
SJ/T 9551.3-1993 Disk style ceramic dielectric preset variable capacitors--Quality grading standard
SJ/T 31482-1995 Comparable unit output energy consumption quota for magnetic material components and device manufacturing products
SJ/T 9551.2-1993 Type C film dielectric variable preset capacitors--Quality grading standard
SJ/T 31480-1995 Comparable unit output energy consumption quota for plate modulation, pulse width, and FM broadcast transmitter manufacturing products

Korean Agency for Technology and Standards (KATS), reversible specific capacity

KS M 3049-2011(2013) Testing methods for specific heat capacity of plastics
KS X ISO/IEC 18093:2007 Information technology-Data interchange on 130 mm optical disk cartridges of type WORM(Write Once Read Many) using irreversible effects-Capacity:5.2 Gbytes per cartridge
KS X ISO/IEC 18093:2013 Information technology－Data interchange on 130 mm optical disk cartridges of type WORM(Write Once Read Many) using irreversible effects－Capacity：5.2 Gbytes per cartridge
KS X ISO/IEC 20162-1:2006 Information technology－Data interchange on 300 mm optical disk cartridges of Type WORM(Write Once Read Many) using irreversible effects－Capacity：30 Gbyte per cartridge
KS X ISO/IEC 20162-1:2005 Information technology－Data interchange on 300 mm optical disk cartridges of Type WORM(Write Once Read Many) using irreversible effects－Capacity：30 Gbyte per cartridge
KS X ISO/IEC 15486:2007 Information technology-Data interchange on 130 mm optical disk cartridges of type WORM(Write Once Read Many) using irreversible effects-Capacity:2.6 Gbytes per cartridge
KS X ISO/IEC 15486:2013 Information technology－Data interchange on 130 mm optical disk cartridges of type WORM(Write Once Read Many) using irreversible effects－Capacity：2.6 Gbytes per cartridge
KS C IEC 61788-5:2002 Superconductivity-Part 5:Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
KS X ISO/IEC 20162-2014(2020) Information technology — Data interchange on 300 mm optical disk cartridges of type WORM(Write Once Read Many) using irreversible effects — Capacity: 30 Gbytes per cartridge
KS X ISO/IEC 18093-2007(2012) Information technology－Data interchange on 130 mm optical disk cartridges of type WORM(Write Once Read Many) using irreversible effects－Capacity：5.2 Gbytes per cartridge
KS C IEC 61094-2:2003 Measurement microphones-Part 2:Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
KS C IEC 61094-3:2003 Measurement microphone-Part 3:Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
KS M ISO 11357-4-2016(2021) Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS T ISO 20848-1:2013 Packaging ― Plastics drums ― Part 1: Removable head (open head) drums with a nominal capacity of 113,6 L to 220 L
KS X ISO/IEC 15041:2007 Information technology-Data interchange on 90 mm optical disk cartridges-Capacity:640 Mbytes per cartridge
KS X ISO/IEC 15041:2013 Information technology－Data interchange on 90 mm optical disk cartridges－Capacity：640 Mbytes per cartridge
KS X ISO/IEC 15286:2007 Information technology-130 mm optical disk cartridges for information interchange-Capacity:5.2 Gbytes per cartridge
KS X ISO/IEC 15286:2013 Information technology－130 mm optical disk cartridges for information interchange－Capacity：5.2 Gbytes per cartridge
KS A IEC 61650:2003 Reliability data analysis techniques-Procedures for comparison of two constant failure rates and two constant failure(event) intensities
KS C IEC 61788-6:2002 Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors
KS L 3519-1997 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS A ISO 20848-1:2008 Packaging-Plastics drums-Part 1:Removable head (open head) drums with a nominal capacity of 113.6 L to 220 L
KS C IEC 61094-3A:2017 Electroacoustics — Measurement microphone — Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique

National Metrological Verification Regulations of the People's Republic of China, reversible specific capacity

JJG(交通) 022-2002 Regulations for the Verification of the Capacity of Ship's Liquid Cargo Measuring Tanks (Volume Comparison Method)

International Organization for Standardization (ISO), reversible specific capacity

ISO/IEC 18093:1999 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 5,2 Gbytes per cartridge
ISO 2172:1983 Fruit juice; Determination of soluble solids content; Pycnometric method
ISO 19935-2:2020 Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp
ISO 11357-4:2005 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 21029-2:2004 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements
ISO 21029-2:2015 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Operational requirements
ISO/TS 20460:2015 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
ISO 21029-1:2018 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 1: Design, fabrication, inspection and tests
ISO 21029-1:2004 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 1: Design, fabrication, inspection and tests
ISO 24144:2023 Thermal insulation — Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range — Differential scanning calorimetry (DSC) method
ISO/TR 22520:2005 Portable hand-held forestry machines - A-weighted emission sound pressure levels at the operator's station - Comparative data in 2002

KR-KS, reversible specific capacity

KS X ISO/IEC 20162-1-2005 Information technology－Data interchange on 300 mm optical disk cartridges of Type WORM(Write Once Read Many) using irreversible effects－Capacity：30 Gbyte per cartridge
KS X ISO/IEC 15486-2007 Information technology－Data interchange on 130 mm optical disk cartridges of type WORM(Write Once Read Many) using irreversible effects－Capacity：2.6 Gbytes per cartridge
KS M ISO 11357-4-2016 Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS A ISO 8687-2003(2023) Cinematography - Signal-to-noise ratio of 8mm type S, 16mm and 35mm variable-area photographic Sound records - Method of measurement
KS C IEC 61094-3A-2017 Electroacoustics — Measurement microphone — Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique

American National Standards Institute （ANSI), reversible specific capacity

ANSI/INCITS/ISO/IEC 18093:1999 Information Technology - Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 5,2 Gbytes per Cartridge
ANSI/INCITS/ISO/IEC 15486:1998 Information Technology - Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) using Irreversible Effects - Capacity: 2,6 Gbytes per Cartridge
ANSI/INCITS 18093-1999 Information technology - Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) using Irreversible Effects - Capacity: 5,2 Gbytes per Cartridge
ANSI/ISO/IEC 18093:1999 Information technology Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects Capacity: 5,2 Gbytes per cartridge Adopted by INCITS
ANSI/ISO/IEC 15486:1998 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 2,6 Gbytes per cartridge Adopted by INCITS
ANSI/ASTM D3801:2000 Method for Measuring the Comparative Extinguishing Characteristics of Solid Plastics in a Vertical Position

能源部, reversible specific capacity

SY 7517-1992 Adiabatic calorimetric method for determination of specific heat capacity of crude oil

Compressed Gas Association (U.S.), reversible specific capacity

CGA C-21-2015 Standard for Design, qualification, and testing of pressure vessels for portable, reversible metal hydride systems
CGA C-21-2008 Design, qualification, and testing of pressure vessels for portable, reversible metal hydride systems

IX-ECMA, reversible specific capacity

ECMA-317-2000 Data Interchange on 300 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 30 Gbytes per Cartridge
ECMA 238-1996 Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 2,6 Gbytes Per Cartridge -
ECMA 280-1998 Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 5,2 Gbytes per Cartridge
ECMA317-2000 Data Interchange on 300 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) Using Irreversible Effects - Capacity: 30 Gbytes per Cartridge

German Institute for Standardization, reversible specific capacity

DIN 41566-3:1977 Reversible tripping devices, 60 V, for telecommunication equipment; testholder and gauges for tests
DIN 19732:2011 Soil quality - Determination of the site specific potential for translocation of non-sorbable substances
DIN EN 13293:2003-01 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalised carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1...
DIN 10811-2:1997 Analysis of tea and tea products - Determination of theobromine and caffeine content of fluid tea drinks - Part 2: HPLC-reference method (for low theobromine contents also)
DIN EN 13530-2:2003 Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13530-2:2002
DIN EN ISO 21029-2:2016-02 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015); German version EN ISO 21029-2:2015
DIN EN 1251-1:2000-03 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; German version EN 1251-1:2000
DIN EN ISO 11357-4:2021-05 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021); German version EN ISO 11357-4:2021
DIN EN ISO 11357-4:2020 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO/DIS 11357-4:2020); German and English version prEN ISO 11357-4:2020
DIN ISO 12772:2007 Laboratory glassware - Disposable microhaematocrit capillary tubes (ISO 12772:1997)；English version of DIN ISO 12772:2007-06
DIN EN 13025-3:2006 Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; English version of DIN EN 13025-3:2006
DIN EN 13008:2000-03 Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l; German version EN 13008:1999
DIN EN 13007:2000-03 Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l; German version EN 13007:1999
DIN EN 12714:2009-10 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 l to 60 l; German version EN 12714:2009
DIN EN 1251-3:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements; German version EN 1251-3:2000
DIN EN 14638-3:2012-06 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods; German version EN 14638-3:2010 + AC:2012
DIN EN 13071-3:2019-12 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections; German version EN 13071-3:2019
DIN EN 12707:2009-12 Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l; German version EN 12707:2009
DIN EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; German version EN 1251-1:2000

Group Standards of the People's Republic of China, reversible specific capacity

T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
T/CSEE 0032-2017 Relative dielectric loss factor and capacitance ratio live test method of capacitive equipment

Professional Standard - Energy, reversible specific capacity

NB/SH/T 0632-2014 Standard test method for determining specific heat capacity by differential scanning calorimetry

Professional Standard - Petroleum, reversible specific capacity

SY/T 7517-1994 Determination method of crude oil specific heat capacity adiabatic calorimetry
SY/T 6154-1995 Static Nitrogen Adsorption Capacity Method for Determination of Rock Specific Surface and Pore Size Distribution

Canadian Standards Association (CSA), reversible specific capacity

CSA ISO/IEC 20162-04-CAN/CSA:2004 Information technology Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects Capacity: 30 Gbytes per cartridge ISO/IEC 20162:2001
CAN/CSA-ISO/IEC 20162:2004 Information technology - Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 30 Gbytes per cartridge

Taiwan Provincial Standard of the People's Republic of China, reversible specific capacity

CNS 5540-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Reverse Bias Test of Variable Capacitance Diodes Under High Temperature)
CNS 13374-1994 Tolerances, Allowable Deviations and Permissible Wears of Limit Gauges
CNS 13984-1997 Methods of test for thermal diffusivity,specific heat capacity,and thermal conductivity of fine ceramics by laser flash method

PL-PKN, reversible specific capacity

PN A86923-1970 Edible yege?able ?ats Testing me?hods De?ermlnation o? nlckel by colorime?rlc me?hod
PN-EN ISO 11357-4-2021-07 E Plastics--Differential scanning calorimetry (DSC)--Part 4: Determination of specific heat capacity (ISO 11357-4:2021)

Professional Standard - Aviation, reversible specific capacity

HB 5351.3-1986 Method for determination of specific gravity of investment casting coatings (volumetric method)

CZ-CSN, reversible specific capacity

CSN 38 5545-1971 Volumetric determination o? oxygen in fuel gases
CSN 72 1076-1983 Determination of exchange capacity and exchangeable cations of clay soils

U.S. Military Regulations and Norms, reversible specific capacity

ARMY MIL-C-43603 B (1)-1982 CANTEEN, WATER, COLLAPSIBLE, 2-QUART CAPACITY
ARMY MIL-C-43603 B-1980 CANTEEN, WATER, COLLAPSIBLE, 2-QUART CAPACITY
ARMY MIL-C-44216 A-1989 CANTEEN, WATER, COLLAPSIBLE, 5-QUART CAPACITY
ARMY MIL-C-44218-1986 CARRIER AND CANTEEN/COLLAPSIBLE, 5-QUART CAPACITY
ARMY MIL-C-44219-1986 CARRIER, CANTEEN, COLLAPSIBLE, 5-QUART CAPACITY
ARMY MIL-C-132 B-1957 CRATE, WOOD, OPEN; MAXIMUM CAPACITY 2,500 POUNDS
ARMY MIL-T-53066 B NOTICE 1-1998 TANK, FABRIC, COLLAPSIBLE, 5,000 BARREL, FUEL
ARMY MIL-T-53066 B-1994 TANK, FABRIC, COLLAPSIBLE, 5,000 BARREL, FUEL

RU-GOST R, reversible specific capacity

GOST 18986.18-1973 Variable capacitance diodes. Method of measuring temperature coefficient of capacitance
GOST 18986.19-1973 Variable capacitance diodes. Method for measuring the quality factor
GOST 24619-1981 Scale weighers of proportioning action, scales and scale weighers of continuous action. Capacity limits. Metrological parameters
GOST R 56754-2015 Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
GOST R 57969-2017 Polymer composites. Determination of specific heat capacity by differential scanning calorimetry with temperature modulation

Liaoning Provincial Standard of the People's Republic of China, reversible specific capacity

DB21/T 1816-2010 Comprehensive energy consumption quota for comparable unit output of boron products
DB21/T 610-1991 Determination of sulfate ions in soil soluble salts - EDTA volumetric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, reversible specific capacity

GB/T 11847-2008 Determination of specific surface area of uranium dioxide power by BET capacity method
GB/Z 22200-2008 Reliability test method for lower capacity alternating current contactors
GB/Z 22200-2016 Reliability test method of small capacity AC contactor
GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
GB/T 23366-2009 Electrochemical performance test of lithium cobalt oxide.Test method for discharge plateau capacity ratio and cycle life
GB/T 17213.10-2015 Industrial-process control valves.Part 2-4:Flow capacity.Inherent flow characteristics and rangeability
GB/T 17213.10-2005 Industrial-process control valves.Part 2-4: Flow capacity.Inherent flow characteristics and rangeability
GB/T 8158.5-1987 Methods for chemical analysis of sodium fluoride--The turbidimetric method for the determination of soluble sulphates content
GB/T 23365-2023 Lithium cobalt oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
GB/T 23365-2009 Electrochemical performance test of lithium cobalt oxide.Test method for specific capacity and charge.discharge efficiency of the first cycle

Japanese Industrial Standards Committee (JISC), reversible specific capacity

JIS D 0004-3:1998 Earth-moving machinery -- Scrapers -- Part 3: Bowl volumetric rating
JIS R 1611:1997 Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method
JIS R 1611:2010 Measurement methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by flash method

Military Standard of the People's Republic of China-General Armament Department, reversible specific capacity

GJB 772.309-1993 Test Methods for Explosives Specific Heat Capacity Determination Microcaloric Calorimetry
GJB 737.8-1993 Test methods for pyrotechnics. Determination of specific heat capacity. Microcalorimetric method.
GJB 8683.8-2015 Test methods for physical parameters of pyrotechnics Part 8: Continuous specific heat capacity determination Differential scanning calorimetry

Defense Logistics Agency, reversible specific capacity

DLA A-A-55228-1993 SHOWER PAIL, COLLAPSIBLE, COTTON DUCK, 5-GALLON CAPACITY
DLA SMD-5962-85127 REV J-2003 MICROCIRCUIT, LINEAR, MICROPROCESSOR COMPATIBLE, 12-BIT ANALOG-TO-DIGITAL CONVERTERS, MONOLITHIC SILICON
DLA DSCC-DWG-85078 REV D-2008 DELAY LINES, ACTIVE, PROGRAMMABLE 3 BIT, 16 PIN DIP COMPATIBLE, EMITTER-COUPLED LOGIC (ECL)
DLA DSCC-DWG-85019 REV E-2008 DELAY LINES, PROGRAMMABLE 16 PIN COMPATIBLE, 3 BIT, TTL COMPATIBLE
DLA SMD-5962-89793 REV C-2006 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 8-BIT IDENTITY COMPARATOR, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA A-A-50223 B-2012 SCALE, BEAM INDICATING: WEIGHING, SPECIFIC GRAVITY; CAPACITY 0.01 NOT LESS THAN 200 GRAMS, THREE OR FOUR WEIGHT BEAMS: 0.01 GRAM SENSITIVITY
DLA A-A-50223 A VALID NOTICE 1-2006 SCALE, BEAM INDICATING: WEIGHING, SPECIFIC GRAVITY; CAPACITY 0.01 NOT LESS THAN 200 GRAMS, THREE OR FOUR WEIGHT BEAMS: 0.01 GRAM SENSITIVITY
DLA A-A-50223 A-2001 SCALE, BEAM INDICATING: WEIGHING, SPECIFIC GRAVITY; CAPACITY 0.01 NOT LESS THAN 200 GRAMS, THREE OR FOUR WEIGHT BEAMS: 0.01 GRAM SENSITIVITY

American Society for Testing and Materials (ASTM), reversible specific capacity

ASTM F2682-07(2018) Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D4430-00(2006) Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM D4430-00 Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM D4430-00e1 Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM D4430-00(2023) Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM D4430-00(2015) Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D4430-00(2010) Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E734-80(2021) Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
ASTM D5472/D5472M-20 Standard Practice for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM E2716-23 Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
ASTM E734-80(2015) Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
ASTM D5472-93(1999)e1 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM D5101-01(2006) Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
ASTM D5101-01 Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
ASTM E2716-09(2014) Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM D5101-99 Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio

Association Francaise de Normalisation, reversible specific capacity

NF H96-119*NF EN 15132:2006 Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods
NF T51-507-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: determination of specific heat capacity
NF T51-507-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
NF T51-507-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
NF E04-555:2007 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement.
NF E86-500-3:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volumes - Part 3 : operational requirements.
NF E86-500-1*NF EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1 : fundamental requirements.
XP Q03-210-2016 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
XP Q03-210*XP ISO/TS 20460:2016 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
NF E04-555:2015 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
XP ISO/TS 20460:2016 Papiers et cartons - Essais en ligne automatisés - Comparabilité métrologique entre mesures normalisées et résultats de jauges en continu
NF C97-332:1994 Measurement microphones. Part 2 : primary method for pressure calibration of laboratory standard microphones by the reciprocity technique.
NF C93-629-4*NF EN 60368-4:2001 Piezoelectric filters of assessed quality - Part 4 : sectional specification - Capability approval
NF M88-250:1983 Petroleum industry. Calibration identification plate for tankers and removable tank cradles.
NF E86-500-2*NF EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2 : design, fabrication, inspection and testing
NF EN 1251-2:2000 Récipients cryogéniques - Récipients transportables, isolés sous vide, d'un volume n'excédant pas 1000 litres - Partie 2 : conception, fabrication, inspection et essai
NF H34-039*NF EN 12714:2009 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 l to 60 l
NF H31-400-3*NF EN 13025-3:2006 Packaging - Light gauge metal containers - Part 3 : removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml
NF F37-010:1984 Railway transport equipment. Tank wagons, removable tank wagons and tank container wagons. Gauging identification board.
NF H31-400-2*NF EN 13025-2:2006 Packaging - Light gauge metal containers - Part 2 : non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml
NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
NF C93-629-4-1*NF EN 60368-4-1:2001 Piezoelectric filters of assessed quality - Part 4-1 : blank detail specification - Capability approval
NF A95-115*NF EN 23923-2:1993 Metallic powders. Determination of apparent density. Part 2 : scott volumeter method.
NF H31-346*NF EN 13008:2000 Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l.

工业和信息化部, reversible specific capacity

YS/T 1256-2018 Differential scanning calorimetry for specific heat capacity test of non-ferrous metal materials

Association of German Mechanical Engineers, reversible specific capacity

VDI/VDE 2630 Blatt 1.4-2010 Computed tomography in dimensional metrology - Measurement procedure and comparability

Professional Standard - Electricity, reversible specific capacity

DL/T 2603-2023

ANSI - American National Standards Institute, reversible specific capacity

INCITS/ISO/IEC 18093:1999 Information technology Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects Capacity: 5@2 Gbytes per cartridge (Adopted by INCITS)
INCITS/ISO/IEC 20162:2001 Information technology Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects Capacity: 30 Gbytes per cartridge (Adopted by INCITS)
INCITS/ISO/IEC 15486:1998 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 2@6 Gbytes per cartridge (Adopted by INCITS)

United States Navy, reversible specific capacity

NAVY MIL-L-17490 D-1955 LIFEBOAT, CO2 INFLATABLE, MARK 3, 15-PERSON CAPACITY

Shanghai Provincial Standard of the People's Republic of China, reversible specific capacity

DB31/T 227-1999 Method for calculating intergrating energy consumption of standard unit production of viscose fibre

European Committee for Standardization (CEN), reversible specific capacity

EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
EN 15132:2006 Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods
EN ISO 21029-2:2015 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015)
EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
EN 13007:1999 Steel Drums - Non-Removable Head (Tight Head) Drums with a Nominal Capacity of 20 l to 60 l
EN 13025-2:2005 Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
EN 209:1999 Steel Drums - Removable Head (Open Head) Drums with a Minimum Total Capacity of 210 l
EN 210:1999 Steel Drums - Non-Removable Head (Tight Head) Drums with a Minimum Total Capacity of 216,5 l
EN 12714:2000 Plastics Drums - Removable Head (Open Head) Drums with a Nominal Capacity of 25 l to 220 l

CEN - European Committee for Standardization, reversible specific capacity

EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity

CU-NC, reversible specific capacity

NC 66-31-1986 Electronics. Ceramic Variable Capacitors. Quality Specifications

Professional Standard - Hygiene , reversible specific capacity

WS/T 407-2012 Guideline for comparability verification of quantitative results within one health care system

Zhejiang Provincial Standard of the People's Republic of China, reversible specific capacity

DB33/ 758-2015 Cotton yarn unit output comparable comprehensive power consumption limit and calculation method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, reversible specific capacity

GB/T 19466.4-2016 Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity

Danish Standards Foundation, reversible specific capacity

DS/EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
DS/ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity
DS/EN ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
DS/EN 209:1986 Steel drums. Open (removable) head drums with a total capacity of 213 litres
DS/EN 12714:2009 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L
DS/EN 14638-3:2010 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
DS/EN 14638-3/AC:2012 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods

IT-UNI, reversible specific capacity

UNI EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
UNI 5824-1979

ES-UNE, reversible specific capacity

UNE-EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
UNE-EN 13293:2002 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1...
UNE-EN ISO 21029-2:2016 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015)
UNE-EN 1251-2:2001/AC:2007 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
UNE-EN 13071-3:2020 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections

国家能源局, reversible specific capacity

SY/T 6154-2019 Static adsorption capacity method for determination of rock specific surface area and pore size distribution
SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts Static nitrogen adsorption capacity method

IN-BIS, reversible specific capacity

IS 8711-1978

U.S. Air Force, reversible specific capacity

AIR FORCE MIL-PRF-83817 A-1997 TRUCK, FORKLIFT, 4,000 POUND CAPACITY, VARIABLE REACH, ROUGH TERRAIN
AIR FORCE MIL-PRF-83817 B-2012 TRUCK, LIFT, FORK, 4,000 POUND CAPACITY, VARIABLE REACH, ROUGH TERRAIN

Professional Standard - Machinery, reversible specific capacity

JB/T 10522-2005 Reliability test method for lower capacity alternating current contactors

ZA-SANS, reversible specific capacity

SANS 5009:1987 Extractable volume of a pharmaceutical product in a container

NEMA - National Electrical Manufacturers Association, reversible specific capacity

NEMA WC 20-1976 Dimensions and Capacities of Returnable Reels for Wires and Cables
NEMA MITA WP 1-2017 Computed Tomography Image Quality (CTIQ): Low-Contrast Detectability (LCD) Assessment When Using Dose Reduction Technology

UY-UNIT, reversible specific capacity

NORMA 60-P-1947

Professional Standard - Military and Civilian Products, reversible specific capacity

WJ/T 9080-2013 Calculation method of comparable comprehensive energy consumption per unit output of civil explosives

Professional Standard - Non-ferrous Metal, reversible specific capacity

YS/T 484-2005 Method for measuring the discharge capacity of the hydrogen storage alloys as the negative electrode of the metal hydride-nickel battery

TR-TSE, reversible specific capacity

TS 755-1969 SODIUM CARBONATE FOR INDUSTRIAL USE DETERMINATION OF TOTAL SOLUDLE ALKALINITY VOLUMETRIC METHOD
TS 2363-1976 RULES POR MEASUREMET OF HORIZONTAL ANGLES ?N TRIANGULATION NETWORK AND ACCEPTABLE ERROR LIMITS

未注明发布机构, reversible specific capacity

BS 5045-2:1989(1999) Transportable gas containers — Part 2 : Specification for steel containers of 0.5 L up to 450 L water capacity with welded seams
BS EN 1251-2:2000(2006) Cryogenic vessels — Transportable vacuum insulated vessels ofnot more than 1000 litres volume — Part 2 : Design, fabrication, inspection and testing

FI-SFS, reversible specific capacity

SFS-EN 209-1986 In case of interpretation disputes the English text applies

VN-TCVN, reversible specific capacity

TCVN 6485-1999 Liquefied petrolium gas (LPG).The filling in transportable containers of up to 150 liter water capacity.Safety requirements

AT-ON, reversible specific capacity

ONORM EN 210-1986 Steel drums; tight head drums with a total capacity of 216,5 litres
OENORM EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
ONORM EN 209-1986 Steel drums; open (removable) head drums with a total capacity of 213 litres
ONORM M 7387 Teil.1-1990 Central gas distribution plants; gas stations with transportable pressure vessels up to 1000 liter capacity
OENORM M 7387-1-2021 Central gas distribution plants - Part 1: Gas stations with transportable pressure receptacles up to 3000 litre capacity

ES-AENOR, reversible specific capacity

UNE 53-401-1986

CH-SNV, reversible specific capacity

SN EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)

Lithuanian Standards Office , reversible specific capacity

LST EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
LST EN 12714-2009 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L
LST EN 14638-3-2010 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
LST EN 14638-3-2010/AC-2012 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods

AENOR, reversible specific capacity

UNE-EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
UNE-EN 12714:2010 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L
UNE-EN 14638-3:2011 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods

BE-NBN, reversible specific capacity

NBN T 03-467-1983 Sodium fluoride primarily used for the production of aluminium - Determination of soluble sulphates content - Turbidimetric method

US-HI, reversible specific capacity

HI 7.1-7.5-2006 Controlled-Volume Metering Pumps for Nomenclature, Definitions, Application, and Operation
HI 7.1-7.5-2013 Controlled-Volume Metering Pumps for Nomenclature, Definitions, Application, and Operation

Professional Standard - Agriculture, reversible specific capacity

药典05-2015 Letter on Corrigendum to the Quality Standards of "Xin Ke Ning Capsules"

国家市场监督管理总局、中国国家标准化管理委员会, reversible specific capacity

GB/T 39861-2021 Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life
GB/T 37207-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide— Test method for discharge plateau capacity ratio and cycle life
GB/T 39864-2021 Electrochemical performance test of lithium manganese oxide—Test method for the initial specific discharge capacity and the initial efficiency

RO-ASRO, reversible specific capacity

STAS 12123/4-1984 Semiconductor devices VARIABLE-CAPACITANCE DIODES Measuring methodes for electrical characteristics

Standard Association of Australia （SAA）, reversible specific capacity

AS 2800:1985 Ambient air - Determination of particulate lead - High volume sampler gravimetric collection - Flame atomic absorption spectrometric method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, reversible specific capacity

GJB 5382.8-2005 Test methods of physical parameter for pyrotechnic. Part 8: Determination of specific heat capacity. DSC method