ZH
RU
ES

Thermogravimetric correction

Thermogravimetric correction, Total:70 items.

In the international standard classification, Thermogravimetric correction involves: Lifting equipment, Equipment for the rubber and plastics industries, Heat treatment, Protection of and in buildings, Metalliferous minerals, Thermodynamics and temperature measurements, Analytical chemistry, Audio, video and audiovisual engineering, Bearings, Heat recovery. Thermal insulation, Plastics, Test conditions and procedures in general, Earthworks. Excavations. Foundation construction. Underground works, Road engineering, Radiation measurements, Construction equipment, Rubber.

ZA-SANS, Thermogravimetric correction

SANS 11630:2007 Cranes - Measurement of wheel alignment

British Standards Institution (BSI), Thermogravimetric correction

BS 7825-3.1:1997 Calibration of rubber and plastics test equipment - Calibration schedules - Thermal properties
BS 6521:1984 Guide for proper use and maintenance of calibrated round steel link lifting chains
BS EN ISO 8990:1996 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box
BS ISO 15568:1998 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
BS ISO 15568:1999 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations

Professional Standard - Machinery, Thermogravimetric correction

JB/T 4390-2008 High and medium tempereture salt bath rectifier
JB/T 4390-1999 High and medium tempereture salt bath rectifier

American Society for Testing and Materials (ASTM), Thermogravimetric correction

ASTM D347-04 Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar
ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E2551-07 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E1860-97a Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E1860-07 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E220-02 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM C1130-07 Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM E1860-02 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E2113-04 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2113-00 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1582-04 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1582-14 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1582-10 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1582-00 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1622-94(1999)e1 Standard Practice for Correction of Spectral Line Overlap in Wavelength-Dispersive X-Ray Spectrometry (Withdrawn 2006)
ASTM D4718/D4718M-15(2023) Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM E2551-18 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2294-21 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

API - American Petroleum Institute, Thermogravimetric correction

API MPMS 11.1 VOL XIII-1982 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume XIII Table 5D-Generalized Lubricating Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6D-Generalized Lubricating Oils Correction of Volu
API MPMS 11.1 VOL I-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume I Table 5A - Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6A - Generalized Crude Oils and JP-4 Correction
API MPMS 11.1 VOL II-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume II Table 5B - Generalized Products Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6B - Generalized Products Correction of Volume to 60 Degre
API MPMS 11.1 VOL VI-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume VI Table 24C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degre
API MPMS 11.1 VOL III-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume III Table 6C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degre
API MPMS 11.1 VOL IX-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IX Table 54C - Volume Correction Factors for Individual and Special Applications Volume Correction to 15 Degrees C Against Thermal Expansion Coefficients at 15 Degre

International Organization for Standardization (ISO), Thermogravimetric correction

ISO 6142:1981 Gas analysis; Preparation of calibration gas mixtures; Weighing methods
ISO 7592:1983 Calibrated round steel link lifting chains; Guidelines to proper use and maintenance
ISO 15568:1998 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations

German Institute for Standardization, Thermogravimetric correction

DIN EN ISO 8990:1996 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994); German version EN ISO 8990:1996
DIN 732:2010 Rolling bearings - Thermally safe operating speed - Calculation and correction values
DIN EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004

AENOR, Thermogravimetric correction

UNE 58523:1988 CALIBRATED ROUND STEEL LINK LIFTING CHAINS. GUIDELINES TO PROPER USE AND MAINTENANCE

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thermogravimetric correction

GB/T 6730.83-2022 Iron ores—Determination of loss on ignition—Gravimetric method corrected by hygroscopic water
GB/T 20305-2006 Calibrated round steel link lifting chains. Guidelines to proper use and maintenance
GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers

International Electrotechnical Commission (IEC), Thermogravimetric correction

IEC 60094-2:1994/COR1:1995 Magnetic tape recording and reproducing systems - Part 2: Calibration tapes; Corrigendum 1

AT-ON, Thermogravimetric correction

ONORM EN ISO 8990:1996 Thermal insulation-Determination of steady-state thermal transmission properties-Calibrated and guarded hot box

European Committee for Standardization (CEN), Thermogravimetric correction

EN ISO 8990:1996 Thermal Insulation - Determination of Steady-State Thermal Transmission Properties - Calibrated and Guarded Hot Box ISO 8990: 1994
EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration

Association Francaise de Normalisation, Thermogravimetric correction

NF P50-748*NF EN ISO 8990:1996 Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hot box.
NF P98-818-38*NF EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38 : common equipment and calibration
NF P98-744-5:1996 Road construction and maintenance equipment. On-site calibration and verification of the settings of the continuous dosing apparatus of material production plants. Part 5 : dry bulk weighing dosing machine. Substance weighing test.
NF T46-043-1/A1:2013 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: testing at constant temperature - Amendment 1 : revised calibration schedule
NF P98-744-2:1996 Road construction and maintenance equipment. On-site calibration and verification of the settings of the continuous dosing apparatus of material production plants. Part 2 : aggregate weighing dosing machine.

International Telecommunication Union (ITU), Thermogravimetric correction

ITU-T U.22 FRENCH-1988 SIGNALS INDICATING DELAY IN TRANSMISSION ON CALLS SET UP BY MEANS OF SYNCHRONOUS SYSTEMS WITH AUTOMATIC ERROR CORRECTION BY REPETITION
ITU-T U.22 SPANISH-1988 SIGNALS INDICATING DELAY IN TRANSMISSION ON CALLS SET UP BY MEANS OF SYNCHRONOUS SYSTEMS WITH AUTOMATIC ERROR CORRECTION BY REPETITION

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Thermogravimetric correction

REPORT BT.2018-1998 Study of the System C Ghost Cancelling Reference Signal for the Evaluation and Correction of Linear Distortion in the Television Chain (15 pp)

ANSI - American National Standards Institute, Thermogravimetric correction

N15.22-1975 CALIBRATION TECHNIQUES FOR THE CALORIMETRIC ASSAY OF PLUTONIUM- BEARING SOLIDS APPLIED TO NUCLEAR MATERIALS CONTROL; CORRECTION - FEBRUARY 1977 (INMM)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Thermogravimetric correction

ASHRAE SE-99-20-04-1999 Comparing Maintenance Costs of Geothermal Heat Pump Systems with Other HVAC Systems in Lincoln Public Schools: Repair@ Service@ and Corrective Actions

RU-GOST R, Thermogravimetric correction

GOST 28947-1991 Glass Hydrometers. Conventional value for tne thermal cubic expasion coefficient (for use in tne preparation of measurement table for liquids)

Institute of Electrical and Electronics Engineers (IEEE), Thermogravimetric correction

IEEE Std P1205-Corrigendum1, Dec 2006 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
IEEE Std 1205-2000/COR 1-2006 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
IEEE 1205-2000/Cor 1-2006 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections

(U.S.) Parachute Industry Association, Thermogravimetric correction

PIA-H-6875-1997 Heat Treatment of Steel, Process for Amendment 1, Renamed from MIL-H-6875H 1 March 1989 and MIL-6875H Amendment 1 16 July 1993