ZH
RU
ES

pm10pm2.5 particle sampler

pm10pm2.5 particle sampler, Total:94 items.

In the international standard classification, pm10pm2.5 particle sampler involves: Particle size analysis. Sieving, TESTING, Air quality, Vocabularies, Occupational safety. Industrial hygiene, Wastes, Construction materials, Measurement of fluid flow, Environmental protection, Microbiology, Welding, brazing and soldering, Analytical chemistry.

National Metrological Verification Regulations of the People's Republic of China, pm10pm2.5 particle sampler

JJG 943-1998 Verification Regulation of Total Suspended Particulate Sampler
JJG 943-2011 Verification Regulation of Total Suspended Particulates Sampler

国家市场监督管理总局、中国国家标准化管理委员会, pm10pm2.5 particle sampler

GB/T 39990-2021 Particulate─Bioaerosol sampler─Technical specification

National Metrological Technical Specifications of the People's Republic of China, pm10pm2.5 particle sampler

JJF 1736-2018 Program of Pattern Evaluation of Total Suspended Particulates Samplers

Standard Association of Australia （SAA）, pm10pm2.5 particle sampler

AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
AS/NZS 3580.9.7:2009
AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
AS/NZS 3580.9.15:2014
AS 1141.32:2008 Methods for sampling and testing aggregates - Weak particles (including clay lumps, soft and friable particles) in coarse aggregates
AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
AS/NZS 3580.9.6:2015
AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
AS 4323.2:2023 Stationary source emissions, Method 2: Determination of total particulate matter — Isokinetic manual sampling — Gravimetric method
AS 4323.2:1995 Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
AS/NZS 3580.9.12:2022 Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter — PM2.5 beta attenuation monitors
AS/NZS 3580.9.17:2018 Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods
AS/NZS 3580.9.11:2022 Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter — PM10 beta attenuation monitors
AS 3853.2:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of gases
AS/NZS 3580.9.12:2013
AS 3580.13.3:1993 Methods for sampling and analysis of ambient air Method 13.3: Determination of fluorides-Total gaseous and acid-soluble airborne particulate fluoride-Sodium acetate coated tube absorption
AS/NZS 3580.9.13:2022 Methods for sampling and analysis of ambient air, Method 9.13: Determination of suspended particulate matter — PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor
AS/NZS 3580.9.14:2013

Professional Standard - Environmental Protection, pm10pm2.5 particle sampler

HJ/T 374-2007 Technical requirement and test procedures for total suspended particulates sampler
HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
HJ/T 368-2007 Technical requirement for environmental protection products. Special orifice flowmeters for total suspended particulate sampler calibration
HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"

Association of German Mechanical Engineers, pm10pm2.5 particle sampler

VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
VDI 3868 Blatt 1-1994 Determination of total emission of metals, metalloids, and their compounds - Manual measurement in flowing, emitted gases - Sampling system for particulate and filter-passing matter
VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration
VDI 3497 Blatt 3-1988 Determination of particulate anions in ambient air; analysis of chloride, nitrate, and sulfate by ion chromatography using suppressor technique after aerosol sampling on PTFE-filters

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pm10pm2.5 particle sampler

GB/T 38517-2020 Particulate—Bioaerosols sampling and analysis—General principles
GB/T 38517-2020(英文版) Particulate—Bioaerosols sampling and analysis—General principles
GB/T 16157-1996 The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source

Professional Standard - Agriculture, pm10pm2.5 particle sampler

空气和废气监测分析方法 5.1.3-2003 Part Five Pollution Source Monitoring Chapter One Sampling Three Particle Sampling Methods
空气和废气监测分析方法 7.2.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources Three-source Sample Collection Methods
空气和废气监测分析方法 7.2.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources—Classification of Particulate Matter Pollutio
GB/T 16157-1996(XG1-2018) "Determination of Particulate Matter in Exhaust from Stationary Pollution Sources and Sampling Methods of Gaseous Pollutants" Amendment No. 1
空气和废气监测分析方法 7.3.4-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 4 Sampling Time Sampling Period and Sampling Requirements
空气和废气监测分析方法 7.2.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter Two Atmospheric Particulate Matter Emission Source Sample Collection Four-source Sample Processing Methods
空气和废气监测分析方法 7.3.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 2 Sampling Instrument Selection
空气和废气监测分析方法 7.2.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources 2 Other Classification Methods

TH-TISI, pm10pm2.5 particle sampler

TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

American Society for Testing and Materials (ASTM), pm10pm2.5 particle sampler

ASTM D8208-19 Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler
ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM D8358-21 Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
ASTM D3267-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D7650-21 Standard Practice for Sampling of Particulate Matter in High Pressure Gaseous Fuels with an In-Stream Filter
ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D7650-13 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter

European Committee for Standardization (CEN), pm10pm2.5 particle sampler

CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
PD CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests

AWS - American Welding Society, pm10pm2.5 particle sampler

F1.1-1985 METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES

Association Francaise de Normalisation, pm10pm2.5 particle sampler

NF EN 13205-5:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 5 : essais de performances des échantillonneurs d'aérosols, réa...
NF EN 13205-4:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 4 : essai de performances en laboratoire par comparaison des concen...

German Institute for Standardization, pm10pm2.5 particle sampler

DIN EN 13205-5:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces; German version EN 13205-5:2014
DIN EN 13205-2:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version EN 13205-2:2014
DIN EN 13205-1:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
DIN ISO 2889 Beiblatt 2:2012-08 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 2: Assessment of the changes in the concentration of aerosol particles due to non-isokinetic sampling
DIN EN ISO 23861:2023-02 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022); German version EN ISO 23861:2022
DIN EN 13205-6:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version EN 13205-6:2014
DIN EN ISO 23861:2023 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
DIN ISO 2889 Beiblatt 1:2012-10 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 1: Distribution of activity via the diameter of aerosol particles

CEN - European Committee for Standardization, pm10pm2.5 particle sampler

PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations

Society of Automotive Engineers (SAE), pm10pm2.5 particle sampler

SAE ARP6320A-2021 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particulate Matter Emissions from Aircraft Turbine Engines
SAE AIR6504-2022 Procedure for the Calculation of non-volatile Particulate Matter Sampling and Measurement System Penetration Functions and System Loss Correction Factors

AENOR, pm10pm2.5 particle sampler

UNE-EN 13205-5:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
UNE-CEN/TR 13205-3:2015 IN Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
UNE-EN 13205-2:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
UNE-EN 13205-1:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
UNE-EN 13205-6:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests

British Standards Institution (BSI), pm10pm2.5 particle sampler

BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
BS EN ISO 23861:2022 Tracked Changes. Workplace air. Chemical agent present as a mixture of airborne particles and vapour. Requirements for evaluation of measuring procedures using samplers
21/30394853 DC BS EN ISO 23861. Workplace air. Chemical agent present as a mixture of airborne particles and vapours. Requirements for evaluation of measuring procedures using samplers
BS ISO 15202-1:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling

ES-UNE, pm10pm2.5 particle sampler

UNE-EN ISO 23861:2023 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)

SAE - SAE International, pm10pm2.5 particle sampler

SAE ARP6320-2018 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particulate Matter Emissions from Aircraft Turbine Engines (Includes Access to Additional Content)
SAE ARP6481-2019 Procedure for the Calculation of Non-Volatile Particulate Matter Sampling and Measurement System Losses and System Loss Correction Factors (Includes Access to Additional Content)

International Organization for Standardization (ISO), pm10pm2.5 particle sampler

ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling

Korean Agency for Technology and Standards (KATS), pm10pm2.5 particle sampler

KS I ISO 15202-1:2006 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 1:Sampling
KS I ISO 15202-1:2014 Workplace air — Determination of metals and metalloids in Workplace air — Determination of metals and metalloids in emission spectrometry — Part 1: Sampling