ZH
RU
ES

Thickness Uniformity

Thickness Uniformity, Total:500 items.

In the international standard classification, Thickness Uniformity involves: Aerospace engines and propulsion systems, Electronic display devices, Heat treatment, Textile machinery, Optoelectronics. Laser equipment, Construction materials, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Fibre optic communications, Tobacco, tobacco products and related equipment, Fertilizers, Television and radio broadcasting, Textile fibres, Tyres, Graphic technology, Paints and varnishes, Animal feeding stuffs, Quality, Rubber, Cinematography, Non-ferrous metals, Special measuring equipment for use in telecommunications, Road vehicle systems, Materials for the reinforcement of composites, Burners. Boilers, Lubricants, industrial oils and related products, Testing of metals, Glass, Kitchen equipment, Rubber and plastics products, Metalliferous minerals, Products of the textile industry, Radiation measurements, Electronic tubes, Acoustics and acoustic measurements, Semiconducting materials, Processes of the textile industry, Resistors, Linear and angular measurements, Photography, Protection against fire, Plastics, Non-destructive testing, Nuclear energy engineering, Analytical chemistry, Optics and optical measurements, Flexible drives and transmissions, Cereals, pulses and derived products, Ceramics, Medical equipment, Elements of buildings, Road engineering, Construction of airports, Protection of and in buildings, Conducting materials, Corrosion of metals, Thermodynamics and temperature measurements, Optical equipment, Pharmaceutics, Metrology and measurement in general, Fasteners, Non-textile floor coverings, Packaging materials and accessories, Electrical accessories, Agricultural machines, implements and equipment, Internal combustion engines, Ferrous metals, Reinforced plastics, Surface treatment and coating, Aerospace electric equipment and systems, On-board equipment and instruments, Ergonomics, Standardization. General rules, Solar energy engineering, Powder metallurgy, Iron and steel products, Technical drawings, Waxes, bituminous materials and other petroleum products.


CZ-CSN, Thickness Uniformity

  • CSN 03 8555-1966 Hot-dip galvanizing. Non-destructive methods of determination of thickness, compositiqn and uniformity oi coatings
  • CSN 35 8586 Cast.2-1986 Camera Tubes. Measurement of white and black background nonuniformity
  • CSN 35 8586 Cast.1-1986 Camera Tubes. Measurement of output signal nonuniformity
  • CSN 35 8572-1982 Television picture tubes. Measuring method of sereen luminance and non-uniformity of sereen luminance
  • CSN 35 8586 Cast.4-1987 Camera Tubes. Measurement of dark current and determination and its inhomogeneity

FI-SFS, Thickness Uniformity

NO-SN, Thickness Uniformity

  • NS 1184-1964 Metal plating - Testing of the uniform thickness by the copper sulphate method

VN-TCVN, Thickness Uniformity

  • TCVN 2372-1987 Raw silk.Method for determination of mean uniformity and minimum uniformity
  • TCVN 5364-1991 Textiles.Method for determination of unevenness by the USTER equipment

Society of Automotive Engineers (SAE), Thickness Uniformity

  • SAE MA4036-1988 Rings, Retaining - Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric FSC 5365
  • SAE MA4036-2012 Rings, Retaining - Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric
  • SAE MA4036A-2021 Rings, Retaining - Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric

ESDU - Engineering Sciences Data Unit, Thickness Uniformity

  • ESDU 67017-1967 Elastic stresses in the torispherical head of a pressure vessel of uniform thickness.
  • ESDU 70001 B-1995 Elastic stresses and deflections for flat square plates under uniformly distributed normal pressure.
  • ESDU 71013 C-1995 Elastic direct stresses and deflections for flat rectangular plates under uniformly distributed normal pressure.
  • ESDU 03012 B-2010 Computer program for calculation of mean value properties for non-uniform compressible flows
  • ESDU 03012 A-2007 Computer program for calculation of mean value properties for non-uniform compressible flows.
  • ESDU 03012-2004 Computer program for calculation of mean value properties for non-uniform compressible flows
  • ESDU 81017 A-1987 Mean forces@ pressures@ and moments for circular cylindrical structures: finite-length cylinders in uniform and shear flow.
  • ESDU 69018 B-1995 Elastic stresses and deflections for long flat rectangular plates under uniformly distributed and linearly varying normal pressure.
  • ESDU 65002-1965 Elastic stresses and deflections for flat circular plates with D/t greater than or equal to 4 under uniform pressure.
  • ESDU 65003-1965 Elastic stresses and deflections for flat circular plates with D/t greater than or equal to 20 under uniform pressure.
  • ESDU 66010-1966 Elastic stresses in a long circular cylindrical shell with a flat head closure under uniform pressure.
  • ESDU 87036 B-1996 Elastic stresses and deflections for square plates with small initial curvature under uniform pressure on the concave or convex face.
  • ESDU 69019-1969 Elastic stresses and deflections for long rectangular plates with small initial curvature under uniformly distributed normal pressure on the concave face.
  • ESDU 93011-1994 Flat rectangular orthotropic plates under uniformly distributed normal pressure. Elastic stresses and deflections for various forms of edge restraint.

RU-GOST R, Thickness Uniformity

  • GOST 25024.4-1985 Character displays. Methods measuring brightness, luminous intensity, irregularity of brightness and irregularity of luminous intensity
  • GOST 21316.4-1975 Photocells. Method of measurement of sensitivity nenuniformity
  • GOST 19536-1974 Nitron fibre. Method for determination of unevening dyeing
  • GOST 6943.14-1994 Textile glass. Yarns. Method for determination of twist balance index
  • GOST 21059.1-1975 Picture tubes for TV. Methods for measurement of screen brightness and uniformity of screen brilliancy
  • GOST R ISO 13326-2003 Pneumatic tyres. Test methods for measuring uniformity
  • GOST 21342.2-1975 Resistors variables. Test method for flexibility of resistance changing
  • GOST 11612.3-1975 Photomultipliers. Measuring method of non-uniformity of light anode sensitivity over the photocatode area
  • GOST 11583-1974 Polimer materials, building and finishing. Methods for the determination of light resistance and uniformity of painting and lightness
  • GOST 310.3-1976 Cements. Methods of tests consistency, times of settining and of soundness
  • GOST 16755-1971 Cathode-ray receiver devices. Method for measurement of irregularity fluorescent screen brightness
  • GOST 19109-1984 Plastics. Method for determination of Izod impact strength
  • GOST 22091.7-1984 X-ray devices. The methods of the measuring of the uniformity of the distribution of the energe flyx density of the X-ray over the X-ray coverage
  • GOST 34208-2017 Glassfiber. Mats. Determination of average thickness, thickness under load and recovery after compression
  • GOST 21815.16-1986 Image intensifier and image converter tubes. Method of measuring the output brightness non- uniformity ratio
  • GOST 21059.5-1976 Kinescopes for black-white and colour television. Measurement methods of chromacity and non-uniformity of screen glow chromacity
  • GOST 18720.10-1976 Television camera tubes. Methods of measurement for black and white background nonuniformity
  • GOST R 51233-1998 State system for the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. General requirements
  • GOST R 8.568-2017 State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
  • GOST IEC 61262-3-2011 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3. Determination of the luminance distribution and luminance non-uniformity
  • GOST 18720.9-1976 Television camera tubes. Methods of measurement for dark current and dark current nonuniformity
  • GOST R 56741-2015 Composites. Method of measuring the uniformity of absorbing electrochromic coating on a glazing surface
  • GOST ISO 7749-2-2004 Agricultural irrigation equipment. Rotating sprinklers. Part 2. Uniformity of distribution and test methods
  • GOST 25698-1998 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness
  • GOST 25698-1983 Powder articles. Methods of determination of hardness

German Institute for Standardization, Thickness Uniformity

  • DIN 17052-1:2000 Heat treatment furnaces - Part 1: Requirements for temperature uniformity
  • DIN-Fachbericht 84:2001 Solid fertilizers - Study on homogeneity; CEN-Report 13960
  • DIN 17052-1:2013-09 Heat treatment furnaces - Part 1: Requirements for temperature uniformity
  • DIN 53944:1993 Testing of textiles; determination of gauge length and eveness of cotton
  • DIN EN 1294:2000-07 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates; German version EN 1294:2000
  • DIN EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified); German version EN 13187:1998
  • DIN 50905-2:1987 Corrosion of metals; corrosion testing; corrosion characteristics under uniform corrosion attack
  • DIN 17052-2:2018-08 Heat treatment furnaces - Part 2: Requirements for the uniformity of the result after heat treatment
  • DIN 6174:2007 Colorimetric evaluation of colour coordinates and colour differences according to the approximately uniform CIELAB colour space
  • DIN EN 61262-3:1995 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994); German version EN 61262-3:1994
  • DIN EN 61262-3:1995-09 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994); German version EN 61262-3:1994
  • DIN EN 15466-1:2009-10 Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity; German version EN 15466-1:2009
  • DIN EN ISO 16424:2018-01 Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd<(Index)2>O<(Index)3> content in gadolinium fuel pellets by measurements of uranium and gadolinium elements (ISO 16424:2012);...
  • DIN EN 15466-1:2023-07 Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity; German and English version prEN 15466-1:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN 15466-1 (2009-10).
  • DIN 53829-1:2014-12 Testing of textiles - Determination of the evenness of filament yarns - Part 1: Testing of the force and extension on the running yarn, principles

CH-SNV, Thickness Uniformity

Professional Standard - Textile, Thickness Uniformity

Society of Motion Picture and Television Engineers (SMPTE), Thickness Uniformity

  • SMPTE ST 431-1-2006 D-Cinema Quality - Screen Luminance Level, Chromaticity and Uniformity
  • SMPTE 431-1-2006 D-Cinema Quality - Screen Luminance Level, Chromaticity and Uniformity
  • SMPTE RP 81-2004 Specifications for Scanning-Beam Uniformity Test Film for 16-mm Motion-Picture Photographic Audio Reproducers
  • SMPTE RP 69-2002 Specifications for Scanning-Beam Uniformity Test Film for 35-mm Motion-Picture Audio Reproducers

Standard Association of Australia （SAA）, Thickness Uniformity

  • AS 3974:1991 Evaluation of uniformity of cement strength from a single source
  • AS 2806.4:2004 Aluminium ores - Sampling - Determination of heterogeneity of constitution
  • AS 2806.4:1994 Aluminium ores - Sampling Part 4: Determination of the heterogeneity of constitution
  • AS/NZS 4356.3:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the luminance distribution and luminance non-uniformity

Professional Standard - Chemical Industry, Thickness Uniformity

American National Standards Institute （ANSI), Thickness Uniformity

ZA-SANS, Thickness Uniformity

  • SANS 62033:2000 Attenuation uniformity in optical fibres
  • SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

Professional Standard - Tobacco, Thickness Uniformity

National Metrological Technical Specifications of the People's Republic of China, Thickness Uniformity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thickness Uniformity

  • GB/T 30824-2014 Testing method for temperature uniformity of gas heat treatment furnace
  • GB 6996.10-1986 Quality of distributiontest chart of transparencies for television
  • GB/T 5918-1997 Determination of mixing homogeneity for formula feed
  • GB/T 13732-2009 General rules for sampling inspection of bulk materials with uniform size
  • GB/T 13732-1992 Genral rules for sampling inspection of bulk materials with uniform size
  • GB/T 5918-2008 Determination of mixing uniformity of feed products
  • GB/T 18506-2001 Uniformity test method for motor vehicle tyres
  • GB/T 6996.10-1986 Quality of distribution test chart of transparencies for television
  • GB/T 18506-2013 Uniformity test method for motor vehicle tyres
  • GB/T 6508-2001 Test method for dyeing uniformity of polyester filament yarns
  • GB/T 6508-2015 Test method for dyeing uniformity of polyester filament yarns
  • GB/T 14979-1994 Eutectic carbide of steel-Micrographic method using standard diagrams
  • GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)
  • GB/T 12792-1991 Methods of measurement of impedance uniformity for radio-frequency cables
  • GB/T 25944-2010 Aluminium ores.Experimental determination of the heterogeneity of distribution of a lot
  • GB/T 25950-2010 Aluminium ores.Experimental determination of the heterogeneity of constitution
  • GB/T 10649-1989 Determination for mixing homogeneity of mineral premix
  • GB/T 10649-2008 Determination of mixing homogeneity for mineral premix
  • GB/T 42222-2022 Laboratory glassware—Testing method and classification of optical uniformity
  • GB/T 32561.1-2016 Measuring method for chalcogenide infrared optical glass.Part 1:Homogeneity
  • GB/T 13490-1992 V-belts--Uniformity of belts--Centre distance variation--Specification and test method
  • GB/T 13490-2006 V-belts. Uniformity of belts. Test method for determination of centre distance variation
  • GB/T 41640-2022 Critical current measurement—Measurement of critical current and its uniformity along the length of 2G-HTS long tapes
  • GB/T 7962.2-1987 Colourless optical glass test methods--Test method by collimator for optical homogeneity
  • GB/T 7962.3-1987 Colourless optical glass test methods--Test method by holographic interference for optical homogeneity
  • GB/T 7962.3-2010 Test methods of colourless optical glass.Part 3:Optical homogeity.Holographic interferometry
  • GB/T 15000.3-2023 Standard sample working guidelines part 3: Standard sample determination and homogeneity and stability evaluation
  • GB/T 5313-1985 Steel plate with through-thickness characteristics
  • GB/T 5313-2023 Thickness direction performance steel plate
  • GB/T 5313-2010 Steel plates with through-thickness characteristics
  • GB/T 19797-2005 Agricultural irrigation equipment.Centre-pivot and moving lateral irrigation machines.Determination of uniformity of water distribution
  • GB/T 19797-2012 Agricultural irrigation equipment.Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles.Determination of uniformity of water distribution
  • GB/T 7962.4-1987 Colourless optical glass test methods--Test method by multiple beam spherical interference for optical homogeneity
  • GB/T 7962.2-2010 Test methods of colourless optical glass.Part 2:Optical homogeneity.Fizeau plano-interferometry
  • GB/T 20176-2006 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of boron atomic concentration in silicon using uniformly doped materials

IT-UNI, Thickness Uniformity

Professional Standard - Agriculture, Thickness Uniformity

  • 119药典 四部-2020 0900 Characteristic Inspection Method 0941 Content Uniformity Inspection Method
  • 138药典 四部-2015 0900 Characteristic Inspection Method 0941 Content Uniformity Inspection Method
  • GB/T 5918-1993 Determination of Mixing Uniformity of Compound Feed
  • 2364药典 二部-2010 Appendix Ⅹ E Content Uniformity Inspection Method
  • 842兽药典 一部-2015 Appendix Contents 0900 Characteristic Inspection Method 0941 Content Uniformity Inspection Method
  • NY/T 247-2009 Determination of the fineness uniformity for sisal yarn Segment length weighing method
  • NY/T 247-1995 Determination of Uniformity of Fineness of Sisal Yarns Fragment Length Weighing Method

TR-TSE, Thickness Uniformity

  • TS 628-1968 TEST METHODS FOR IRREGULARITY OF YAKN
  • TS 2394-1976 WOOL - DETERM?NATION OF SHORT - TERM IRREGULARITY OF LINEAR DENSITY OF SLIVERS, ROVINGS AND YARNS, BY BEANS OF AN ELECTRONIC EVENNESS TESTER

ECIA - Electronic Components Industry Association, Thickness Uniformity

Danish Standards Foundation, Thickness Uniformity

  • DS/CEN/CR 13960:2001 Solid fertilizers - Study on homogeneity
  • DS 423.43:2002 Testing of concrete - Hardened Concrete - Paste homogeneity
  • DS 1114-4:1989 Corrugated sheets for roofing. Testing of resistance to uniformly distributed load (snow and wind)
  • DS/EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
  • DS 423.43/Bil.1:2002 Testing of concrete - Hardened concrete - Reference atlas on paste homogeneity
  • DS/EN 61262-3:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity
  • DS/EN 15466-1:2009 Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity

Association Francaise de Normalisation, Thickness Uniformity

  • FD U42-409*FD CR 13960:2002 Solid fertilizers - Homogeneity analysis
  • FD CR 13960:2002 Engrais solides - Étude de l'homogénéité
  • NF EN ISO 12625-3:2014 Papier en tissue et produits tissue - Partie 3 : détermination de l'épaisseur, de l'épaisseur moyenne d'une feuille en liasse et de la masse volumique moyenne et de la main
  • NF G07-309*NF ISO 4913:2019 Textiles- Cotton fibres- Determination of length (span length) and uniformity index
  • NF EN ISO 105-Z11:2000 Textiles - Essais de solidité des teintures - Partie Z11 : évaluation de l'uniformité des dispersions de colorants
  • NF A04-194:1996 Foundry products. Guideline for acceptance criteria of discontinuities on machined surfaces.
  • NF ISO 4913:2019 Textiles - Fibres de coton - Détermination de la longueur pincée (span length) et de l'indice d'uniformité
  • NF X10-023*NF EN 13187:1999 Thermal performance of buildings. Qualitative detection of thermal irregularities in building envelopes. Infrared method.
  • FD X07-035*FD ISO GUIDE 35:2018 Reference materials - Guidance for characterization and assessment of homogeneity and stability
  • FD ISO GUIDE 35:2018 Matériaux de référence - Lignes directrices pour la caractérisation et l'évaluation de l'homogénéité et la stabilité
  • NF EN 1294:2000 Vantaux de portes - Détermination du comportement aux variations d'humidité entre des climats successifs uniformes
  • NF EN 13036-8:2008 Caractéristiques de surface des routes et aérodromes - Méthodes d'essais - Partie 8 : détermination des indices d'uni transversal
  • NF EN 61262-3:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 3 : détermination de la distribution de luminance et de la non-uniformité de luminance
  • NF E24-208:1989 V-belts. Uniformity of belts. Centre distance variation. Specifications and test method.
  • NF EN 15466-1:2010 Primaires pour produits de scellement de joints appliqués à froid et à chaud - Partie 1 : détermination de l'homogénéité
  • NF C74-223*NF EN 61262-3:1994 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3 : determination of the luminance distribution and luminance non-uniformity.
  • NF B38-303:2002 Textile glass - Chopped-stand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression.
  • NF EN ISO 11664-5:2016 Colorimétrie - Partie 5 : espace chromatique L*u*v* et diagramme de chromaticité uniforme u', v' CIE 1976
  • NF T36-007-5:2011 Colorimetry - Part 5 : CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram.
  • NF T36-007-5*NF EN ISO 11664-5:2016 Colorimetry - Part 5 : CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram
  • NF L76-001:1995 Aerospace. Visual display units. Visual performance criterias for symbology on a uniform background.
  • NF EN 13036-5:2019 Caractéristiques de surface des routes et aérodromes - Méthodes d'essais - Partie 5 : détermination des indices d'uni longitudinal
  • NF P98-275-1:1992 TEST RELATING TO PAVEMENTS. DETERMINATION OF THE RATE OF BINDER SPRAY. PART 1 : MEASUREMENT OF THE MEAN VALUE OF SPRAY RATE AND TRANSVERSAL HOMOGENEITY.
  • NF X21-070*NF ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials.

International Electrotechnical Commission (IEC), Thickness Uniformity

  • IEC TS 62033:2000 Attenuation uniformity in optical fibres
  • IEC TR 62977-3-2:2016 Electronic display devices - Part 3-2: Evaluation of optical characteristics - Mura
  • IEC 61262-3:1994 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity
  • IEC TS 62607-6-6:2021 Nanomanufacturing - Key control characteristics - Part 6-6: Graphene - Strain uniformity: Raman spectroscopy

British Standards Institution (BSI), Thickness Uniformity

  • PD IEC TS 62033:2000 Attenuation uniformity in optical fibres
  • BS ISO 26431-1:2009 Digital cinema (D-cinema) quality. Screen luminance level, chromaticity and uniformity
  • BS ISO 26431-1:2008 Digital cinema (D-cinema) quality - Screen luminance level, chromaticity and uniformity
  • BS 3712-1:1991 Building and construction sealants - Methods of test for homogeneity, relative density and penetration
  • PD ISO GUIDE 35:2017 Reference materials. Guidance for characterization and assessment of homogeneity and stability
  • BS ISO 15625:2014 Silk. Electronic test method for defects and evenness of raw silk
  • BS ISO 3616:2001 Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression
  • 23/30473103 DC BS ISO 33405. Reference materials. Guidance for characterization and assessment of homogeneity and stability
  • BS EN ISO 11664-5:2016 Colorimetry. CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram
  • BS ISO 19056-1:2015 Microscopes. Definition and measurement of illumination properties. Image brightness and uniformity in bright field microscopy
  • BS EN 61262-3:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.. Determination of the luminance distribution and luminance non-uniformity
  • 21/30434147 DC BS EN IEC 62977-2-11. Electronic displays - Part 2-11. Measurement method of local luminance and uniformity
  • BS AU 50-1.0.1:1999 Tyres and wheels. Tyres. General. Method of test for measuring tyre uniformity
  • BS EN ISO 10582:2012 Resilient floor coverings. Heterogeneous poly(vinyl chloride) floor coverings. Specification
  • 22/30448655 DC BS ISO 3616. Textile glass. Chopped-strand and continuous-filament mats. Determination of average thickness, thickness under load and recovery after compression
  • BS ISO 3616:2022 Tracked Changes. Textile glass. Chopped-strand and continuous-filament mats. Determination of average thickness, thickness under load and recovery after compression
  • BS ISO 9608:2022 V-belts and V-ribbed belts. Uniformity of belts. Test method for determination of centre distance variation
  • BS 7459-2:1991 Rotating sprinklers for irrigation equipment - Methods of test for uniformity of distribution
  • BS PD ISO/TS 18621-21:2020 Graphic technology. Image quality evaluation methods for printed matter. Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
  • PD ISO/TS 18621-21:2023 Graphic technology. Image quality evaluation methods for printed matter. Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
  • BS ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials

AENOR, Thickness Uniformity

  • UNE-CR 13960:2001 Solid fertilizers - Study on homogeneity.
  • UNE 40460:1995 TEXTILES. COTTON FIBRES. DETERMINATION OF LENGTH (SPAN LENGTH) AND UNIFORMITY INDEX.
  • UNE 40225-2:1974 IN PERIODICAL CONTROLS OF THE ELECTRONIC EVENESS TESTER.
  • UNE-ISO 4591:2010 Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
  • UNE 40607:2017 Agrotextiles. Determination of the geometric uniformity of the woven fabrics with monofilaments
  • UNE-EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
  • UNE 40225-1:1974 IN WOOL. DETERMINATION OF SHORT TERM IRREGULARITY OF LINEAR DENSITY OF SILVERS, ROVING AND YARNS, BY MEANS OF AN ELECTRONIC EVENESS TESTER.
  • UNE 43506:1985 TEXTILE GLASS. MATS OF TEXTILE GLASS. DETERMINATION OF AVERAGE THICKNESS, THICKNESS UNDER LOAD AND RECOVERY AFTER COMPRESSION
  • UNE-EN 61262-3:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 3: DETERMINATION OF THE LUMINANCE DISTRIBUTION AND LUMINANCE NON-UNIFORMITY.
  • UNE-EN 15466-1:2010 Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Thickness Uniformity

  • GB/T 32991-2016 Test method for density uniformity of mineral wool for thermal insulation
  • GB/T 33779.1-2017 Guidance for special characteristics of optical fibre—Part 1: Attenuation uniformity
  • GB/T 33876-2017 Method for measuring gloss uniformity of image on colour copied pages

工业和信息化部, Thickness Uniformity

  • YB/T 4772-2019 Determination and calculation method of billet heating temperature uniformity
  • YB/T 4143-2019 Inspection method for uniformity determination of solid metals using spark source atomic emission spectrometry

VE-FONDONORMA, Thickness Uniformity

PL-PKN, Thickness Uniformity

  • PN P04672-1989 Filament yarns Determination of unevenness of colour
  • PN T04840-09-1986 Camera tubes Methods of measuring of dark current and determining of its non-uniformity

Korean Agency for Technology and Standards (KATS), Thickness Uniformity

  • KS K ISO 4913:2021 Textiles — Cotton fibres —Determination of length(span length) and uniformity index
  • KS X ISO/IEC 19799-2010(2020) Information technology－Method of measuring gloss uniformity on printed pages
  • KS M ISO 13226:2007 Rubber－Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers
  • KS D 0259-2012(2017) Methods of measurement of thickness,thickness variation and bow for silicon wafer
  • KS M ISO 13326:2007 Test methods for measuring tyre uniformity
  • KS M ISO 13326-2007(2022) Test methods for measuring tyre uniformity
  • KS M ISO 13326-2007(2017) Test methods for measuring tyre uniformity
  • KS A ISO 26431-1-2012(2017) Digital cinema(D-cinema) quality－Part 1：Screen luminance level, chromaticity and uniformity
  • KS L 2106-2009 Measuring method for the homogeneity of glasses by laser interferometry
  • KS E ISO 6138-2003(2019)
  • KS A ISO 26431-1-2012(2022) Digital cinema(D-cinema) quality－Part 1：Screen luminance level, chromaticity and uniformity
  • KS E ISO 6138:2003 Aluminium ores－Experimental determination of the heterogeneity of constitution
  • KS K ISO 16549:2010 Textiles-Unevenness of textile strands-Capacitance method
  • KS K ISO 16549:2021 Textiles — Unevenness of textile strands — Capacitance method
  • KS K 0525-2015 Test method for abrasion resistance of textile fabrics－Uniform abrasion method
  • KS K 0525-2021 Test method for abrasion resistance of textile fabrics — Uniform abrasion method
  • KS E ISO 6139-2003(2019)
  • KS K ISO 16549:2015 Textiles-Unevenness of textile strands-Capacitance method
  • KS M ISO 4591-2007(2022) Plastics－Film and sheeting－Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
  • KS K ISO 4913:2008 Textiles-Cotton fibres-Determination of length(span length) and uniformity index
  • KS K ISO 4913:2014 Textiles — Cotton fibres — Determination of length(span length) and uniformity index
  • KS M ISO 4591:2007 Plastics-Film and sheeting-Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
  • KS M ISO 4591-2007(2017) Plastics－Film and sheeting－Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
  • KS L 2106-1994 Measuring method for the homogeneity of glasses by laser interferometry
  • KS L 2106-2009(2019) Measuring method for the homogeneity of glasses by laser interferometry
  • KS K ISO 2649:2009 Wool－Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester
  • KS K 0525-1995 Testing method for abrasion resistance of textile fabrics:uniform abrasion method
  • KS A ISO GUIDE 35:2018 Reference materials — Guidance for characterization and assessment of homogeneity and stability
  • KS A ISO 26431-1:2012 Digital cinema(D-cinema) quality－Part 1：Screen luminance level, chromaticity and uniformity
  • KS C 6111-4-2007(2017) Homogeneity in the surface resistance of large high-Tc superconductor films at microwave frequencies
  • KS C 6111-4-2007(2022) Homogeneity in the surface resistance of large high-Tc superconductor films at microwave frequencies
  • KS C 6111-4-2007 Homogeneity in the surface resistance of large high-Tc superconductor films at microwave frequencies
  • KS C IEC 61262-3-2003(2018)
  • KS C IEC 61262-3:2003 Medical electrical equipment－Characteristics of electro－optical X－ray image intensifiers－Part 3：Determination of the luminance distribution and luminance non－uniformity
  • KS F 2294-2000(2021) Test method for structural performance of exterior windows,curtain walls and doors by uniform static air pressure difference
  • KS F 2829-2005(2020) Thermal performance of buildings－Quantitative detection of thermal irregularities in building envelopes－Infrared method
  • KS K ISO 2649-2009(2014) Wool－Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester

KR-KS, Thickness Uniformity

  • KS K ISO 4913-2021 Textiles — Cotton fibres —Determination of length(span length) and uniformity index
  • KS K ISO 4913-2014 Textiles — Cotton fibres — Determination of length(span length) and uniformity index
  • KS K ISO 16549-2021 Textiles — Unevenness of textile strands — Capacitance method
  • KS A ISO GUIDE 35-2018 Reference materials — Guidance for characterization and assessment of homogeneity and stability
  • KS A ISO GUIDE 35-2018(2023) Reference materials — Guidance for characterization and assessment of homogeneity and stability

Japanese Industrial Standards Committee (JISC), Thickness Uniformity

  • JIS D 4233:2001 Test procedures for automobile tire uniformity
  • JIS Q 0035:2022 Reference materials -- Guidance for characterization and assessment of homogeneity and stability
  • JIS R 1666:2005 Testing method for macro-heterogeneity in microstructure of fine ceramics
  • JIS B 7206:1972 35 mm motion picture scanning-beam illumination uniformity test films, laboratory type
  • JIS Z 8781-5:2013 Colorimetry.Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram
  • JIS B 0090-4:2001 Preparation of drawings for optical elements and systems -- Part 4: Material imperfections -- Inhomogeneity and striae
  • JIS K 0143:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials

Professional Standard - Machinery, Thickness Uniformity

  • JB/T 8261-2015 Test chart (A3) for screen and density inhomogeneity of electrostatic copy
  • JB/T 8261-1999 The screening and non-uniformity of image density test chart for electrostatic copying process A3
  • JB/T 9495.7-1999 Measuring method for optical homogeneity of optical crystals
  • JB/T 8248.3-1999 Method for measuring the coefficient of vignetting and uniformity of image plane illuminance

American Society for Testing and Materials (ASTM), Thickness Uniformity

  • ASTM D3928-00a Standard Test Method for Evaluation of Gloss or Sheen Uniformity
  • ASTM D823-95(2001) Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
  • ASTM D823-95(2012) Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
  • ASTM D823-95(2012)e1 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
  • ASTM D3928-00a(2005) Standard Test Method for Evaluation of Gloss or Sheen Uniformity
  • ASTM D3928-00a(2014) Standard Test Method for Evaluation of Gloss or Sheen Uniformity
  • ASTM D823-17 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
  • ASTM D823-95 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
  • ASTM D823-18(2022) Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
  • ASTM D823-95(2007) Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
  • ASTM C917-05 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
  • ASTM C917-05(2011) Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
  • ASTM D4158-08(2020) Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
  • ASTM D823-18 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
  • ASTM C917-98 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
  • ASTM A991/A991M-22 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM F1618-96 Standard Practice for Determination of Uniformity of Thin Films on Silicon Wafers
  • ASTM D1447-89(1994)e1 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
  • ASTM D1447-07(2021) Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • ASTM E2749-15a(2019) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
  • ASTM A991/A991M-10 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM A991/A991M-17 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM D1447-07(2012)e1 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • ASTM D1447-07 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • ASTM D1447-07e1 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • ASTM D3928-89 Standard Test Method for Evaluation of Gloss or Sheen Uniformity
  • ASTM D3928-00a(2010) Standard Test Method for Evaluation of Gloss or Sheen Uniformity
  • ASTM D3928-00a(2018) Standard Test Method for Evaluation of Gloss or Sheen Uniformity
  • ASTM A991/A991M-98 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM A991/A991M-08 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM A991/A991M-98(2004) Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM C1164-92(2003) Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
  • ASTM C1164-92(1997)e1 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
  • ASTM E2749-10(2014) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
  • ASTM E2749-15 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
  • ASTM E2749-15a Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
  • ASTM D4158-08 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
  • ASTM D4158-08(2012) Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
  • ASTM E2749-23 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
  • ASTM A991/A991M-10(2015) Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM E2749-10 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
  • ASTM E2810-11(2017) Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units
  • ASTM E2810-19 Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units
  • ASTM D6922-03 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
  • ASTM D6922-13(2018) Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
  • ASTM F2964-12 Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device
  • ASTM D4158-92 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
  • ASTM D4158-01 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
  • ASTM F812/F812M-97 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
  • ASTM F812/F812M-02 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
  • ASTM F812/F812M-07 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
  • ASTM D5414-95(2020) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
  • ASTM D4158-08(2016) Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
  • ASTM D1447-00 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
  • ASTM D1425/D1425M-14(2020) Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
  • ASTM D1425/D1425M-14 Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
  • ASTM F2964-12(2020) Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device
  • ASTM C1164-22 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
  • ASTM E2355-04 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
  • ASTM E1089-86(2001) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
  • ASTM E1089-86(1995) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
  • ASTM E108-10 Standard Test Methods for Fire Tests of Roof Coverings
  • ASTM E998-19 Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads
  • ASTM C1164-14 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
  • ASTM E108-16 Standard Test Methods for Fire Tests of Roof Coverings
  • ASTM E1089-86(2007) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
  • ASTM C1164-92(2009) Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
  • ASTM F788/F788M-05 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
  • ASTM F788/F788M-02 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

ANSI - American National Standards Institute, Thickness Uniformity

国家市场监督管理总局、中国国家标准化管理委员会, Thickness Uniformity

  • GB/T 36617-2018 Digital cinema (D-cinema) quality—Screen luminance level,chromaticity and uniformity
  • GB/T 40150-2021 Grain and oil storage—Evaluation of uniformity of grain mechanical ventilation

RO-ASRO, Thickness Uniformity

  • STAS 12677-1988 OPTICAL GLASS Optical homogeneity checking up
  • SR ISO 4591:1996 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
  • STAS 9139/11-1980 MAN-MADE YARNS Determination of evenness of dye of polyamidic yarns

Taiwan Provincial Standard of the People's Republic of China, Thickness Uniformity

JSAE - Society of Automotive Engineers of Japan@ Inc., Thickness Uniformity

National Aeronautics and Space Administration (NASA), Thickness Uniformity

  • NASA NACA-RM-A51D25-1951 Low-speed characteristics of a wing having 63 degrees sweepback and uniform camber
  • NASA-TR-R-358-1971 Stress-intensity factor for a cracked sheet with riveted and uniformly spaced stringers

HU-MSZT, Thickness Uniformity

National Metrological Verification Regulations of the People's Republic of China, Thickness Uniformity

International Organization for Standardization (ISO), Thickness Uniformity

  • ISO 13326:1998 Test methods for measuring tyre uniformity
  • ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
  • ISO 3616:2001 Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression
  • ISO 3616:1977 Textile glass; Mats; Determination of average thickness, thickness under load and recovery after compression
  • ISO 16549:2004 Textiles - Unevenness of textile strands - Capacitance method
  • ISO 4591:1979 Plastics — Film and sheeting — Determination of average thickness of a sample and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
  • ISO 6138:1991 Aluminium ores; experimental determination of the heterogeneity of constitution
  • ISO 2649:1974 Wool; Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester
  • ISO 11597:1995 Verification of samples of uranyl or plutonium nitrate solutions by density measurements
  • ISO/DIS 33405:2023 Reference materials — Guidance for characterization and assessment of homogeneity and stability
  • ISO/CIE 11664-5:2016 Colorimetry- Part 5:CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram
  • ISO 9608:1994 V-belts - Uniformity of belts - Test method for determination of centre distance variation
  • ISO 16549:2021 Textiles — Unevenness of textile strands — Capacitance method
  • ISO 15625:2014 Silk - Electronic test method for defects and evenness of raw silk
  • ISO 26431-1:2008 Digital cinema (D-cinema) quality - Part 1: Screen luminance level, chromaticity and uniformity
  • ISO/CIE DIS 11664-5 | prEN ISO/CIE 11664-5 Colorimetry — Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram
  • ISO 11638:2012 Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification
  • ISO 7749-2:1990 Irrigation equipment; rotating sprinklers; part 2: uniformity of distribution and test methods
  • ISO 19056-1:2015 Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
  • ISO 11664-5:2009 Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram
  • ISO 9608:1988 V-belts; uniformity of belts; centre distance variation; specifications and test method
  • ISO 9608:2022 V-belts and V-ribbed belts — Uniformity of belts — Test method for determination of centre distance variation
  • ISO/TS 23973:2020 Liquid chromatography at critical conditions (LCCC) — Chemical heterogeneity of polyethylene oxides
  • ISO 3616:2022 Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression
  • ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
  • ISO 14237:2000 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials

TIA - Telecommunications Industry Association, Thickness Uniformity

  • TSB62-5-1995 ITM-5 Characterization of Attenuation Uniformity of Optical Fiber

Shanxi Provincial Standard of the People's Republic of China, Thickness Uniformity

  • DB14/T 2532-2022 Test method for furnace temperature uniformity of annular furnace

Professional Standard - Petrochemical Industry, Thickness Uniformity

  • SH/T 0801-2007 Standard test method for determination of homogeneity and miscibility in automotive engine oils

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Thickness Uniformity

  • ASHRAE TO-98-9-1-1998 Effect of Airflow Nonuniformity on Evaporation Performance
  • ASHRAE SE-99-7-2-1999 Influence of Heat and Contaminant Source Nonuniformity on the Performance of Three Different Room Air Distribution Methods
  • ASHRAE 4445-2001 Spatial Homogeneity of Air in a Mushroom Tunnel: Single VS. Boost Duct Air Distribution Systems

Professional Standard - Electron, Thickness Uniformity

  • SJ/Z 3206.9-1989 Methods for inspection of standard samples or sample uniformity
  • SJ 20844-2002 Test method for microzone homogeneity of semi-insulating monocrystal gallium arsenide

PT-IPQ, Thickness Uniformity

  • NP 3792-1988 Paper Determination of bulking thickness and apparent density
  • NP 525-1988 Zinc-coated products Determination of the mass per unit área and of the coating mean thickness

Group Standards of the People's Republic of China, Thickness Uniformity

  • T/GDC 193-2022 Evaluation and classification of heating temperature uniformity of household gas stoves and integrated stoves
  • T/CIESC 0013-2021 Standard for heating uniformity of industrial microwave equipment
  • T/QGCML 1432-2023 Technical specification for forming high uniformity coated fabrics
  • T/CAB 0133-2022 Household electromagnetic cooking appliance-Methods for measuring the heating uniformity grade
  • T/CAS 473-2021 Baking uniformity requirements for household and similar electric ovens
  • T/ZFB 0014-2022 Determination of dyeing uniformity of core-spun yarn Parallel dyeing
  • T/SZAS 4-2018 Power lithium-ion battery application—Biaxial stretched separator Part1：Thickness uniformity
  • T/SZAS 1-2018 Power lithium-ion battery application—Uniaxial stretched separator Part1：Thickness uniformity
  • T/CTES 1030-2020 Measurement of diameter and their distribution of glass fibers of electronic filaments
  • T/CIS 11001-2020 On-line detection of powder mixing uniformity in traditional Chinese medicine production process by near-infrared spectroscopy
  • T/CES 067-2021 Magnetic circuit test method for magnetization critical current uniformity of high temperature superconducting tapes
  • T/CMA HG026-2021 Tires for calibration of car tire uniformity testing machine and dynamic balancing testing machine
  • T/CMA 026-2021 Tires for calibration of car tire uniformity testing machine and dynamic balancing testing machine
  • T/CIRA 42-2022
  • T/CICEIA /CAMS4-2020 Diesel engine - Test method of ammonia uniformity for SCR converter
  • T/CAS 567-2022 Technical specification for evaluating the baking uniformity of household oven based on image segmentation algorithm
  • T/CES 046-2020 Specification of magnetic circuit test system for magnetization critical current uniformity of high temperature superconducting tapes
  • T/CMA HG027-2021 Tires for truck tire uniformity testing machine and dynamic balancing testing machine calibration
  • T/CMA 027-2021 Tires for truck tire uniformity testing machine and dynamic balancing testing machine calibration

US-FCR, Thickness Uniformity

YU-JUS, Thickness Uniformity

  • JUS N.C6.010-1982 Radio-frequency cables. Measuring methods of uniformity oflocal characteristic impedance
  • JUS N.C6.009-1982 Radio-frequency cables. Maasuring methods of unifomtity of effective characteristic impedance

Professional Standard - Commodity Inspection, Thickness Uniformity

  • SN/T 0803.5-1999 Oil bearing materials for import and export.Method for the inspection of grade and uniformity
  • SN/T 0471-1995 Test method for dyeing uniformity of importexport polyester textured yarn
  • SN/T 0471-2010 Test method of dying uniformity for import and export polyester textured yarn

International Commission on Illumination (CIE), Thickness Uniformity

  • CIE 31-1976 Glare and Uniformity in Road Lighting Installations (E)
  • CIE S 014-5/E-2009 Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram (First Edtion)

Institute of Electrical and Electronics Engineers (IEEE), Thickness Uniformity

  • SMPTE ST 431-1:2006 ST 431-1:2006 - SMPTE Standard - D-Cinema Quality — Screen Luminance Level, Chromaticity and Uniformity
  • ST 431-1:2006 ST 431-1:2006 - SMPTE Standard - D-Cinema Quality — Screen Luminance Level, Chromaticity and Uniformity
  • IEEE/ANSI N42.27-1999 American National Standard for Determination of Uniformity of Solid Gamma-Emitting Flood Sources

IN-BIS, Thickness Uniformity

American Society of Mechanical Engineers (ASME), Thickness Uniformity

  • ASME B27.6-1972(R2017) General Purpose Uniform Cross Section Spiral Retaining Rings
  • ASME 2210-2001 Weld Joints Between Materials of Unequal Thickness for Steam Drums and Mud Drums Section I; ANNULLED; SUPP 7

Military Standard of the People's Republic of China-General Armament Department, Thickness Uniformity

  • GJB 1912-1994 Test method for uniformity of magnetic field on surface of permanent magnet
  • GJB 1912A-2021 Test method for uniformity of magnetic field on surface of permanent magnet
  • GJB 94-1986 Adhesives—Test Method for Uneven Peel Strength (Metal to Metal)
  • GJB 9247-2017 Optical glass optical non-uniformity detection method Plane interference multi-surface method
  • GJB 5183-2003 Evaluation method for bullet scattering radius, scattering blind zone radius and scattering uniformity of submunition projectiles

European Committee for Standardization (CEN), Thickness Uniformity

  • prEN 26781-1992 Thermal insulation; qualitative detection of thermal irregularities in building envelopes; infrared method (ISO 6781:1983)
  • CEN EN 13036-8-2008 Road and airfield surface characteristics — Test methods — Part 8: Determination of transverse unevenness indices
  • EN 3475-506:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity
  • EN 3475-506:2002 Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 506: Plating Continuity
  • EN 13187:1998 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified)
  • CEN EN 13036-6-2008 Road and airfield surface characteristics — Test methods — Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
  • prEN ISO/CIE 11664-5 Colorimetry - Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram (ISO/CIE DIS 11664-5:2023)

Indonesia Standards, Thickness Uniformity

  • SNI ISO 4913:2010 Textiles - Cotton fibres - Determination of length (span length) and uniformity index

未注明发布机构, Thickness Uniformity

  • BS 3712-1:1991(2011) Building and construction sealants — Part 1 : Methods of test for homogeneity, relative density and penetration
  • YY 0457.3-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 3: Determination of brightness distribution and non-uniformity

ES-AENOR, Thickness Uniformity

Professional Standard - Building Materials, Thickness Uniformity

  • JC/T 338-1983 Test Method for Uniformity of Glass Balls—Oil Immersion Projection Method
  • JC/T 578-1995 Test method of measuring uniformity of cement strength

Henan Provincial Standard of the People's Republic of China, Thickness Uniformity

  • DB41/T 1001-2014 Determination of Mixing Uniformity of Feed Products by Ion Chromatography

NEMA - National Electrical Manufacturers Association, Thickness Uniformity

  • NEMA MS 3-1989 Determination of Image Uniformity in Diagnostic Magnetic Resonance Images
  • NEMA XR 17-1993 Test Standard for the Measurement of the Image Signal Uniformity of an X-Ray Image Intensifier System

National Electrical Manufacturers Association（NEMA), Thickness Uniformity

  • NEMA MS 3-2003 Determination of Image Uniformity in Diagnostic Magnetic Resonance Images
  • NEMA MS 3-2008 Determination of Image Uniformity in Diagnostic Magnetic Resonance Images

BR-ABNT, Thickness Uniformity

  • ABNT ISO GUIA 35:2020 Reference materials - Guidance for characterization and assessment of homogeneity and stability

PH-BPS, Thickness Uniformity

  • PNS ISO Guide 35:2021 Reference materials - Guidance for characterization and assessment of homogeneity and stability

Canadian General Standards Board （CGSB), Thickness Uniformity

GM North America, Thickness Uniformity

  • GM GMJ130-1988 Metric Uniform Cross Section Rectangular Retaining Rings General Specifications
  • GM GMJ131-1988 Metric Uniform Cross Section Spiral Retaining Rings General Specifications

Professional Standard - Nuclear Industry, Thickness Uniformity

  • EJ/T 781-1993 Research on detection method of uranium homogeneity in stacked fuel elements

AT-ON, Thickness Uniformity

BELST, Thickness Uniformity

  • STB 1501-2013 Highways. Мethod of determination elastic modulus and uniformity consolidation of materials of layers of road designs
  • STB GOST R 8.585-2004 State system for ensuring the uniformity of measurements.Thermocouples. Nominal static characteristics of conversion

Professional Standard - Ferrous Metallurgy, Thickness Uniformity

  • YB/T 4143-2006 Rules for checking the homogeneity of materials used in the preparation of reference samples

Lithuanian Standards Office , Thickness Uniformity

  • LST EN 1294-2002 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
  • LST EN 15466-1-2009 Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity
  • LST EN 61262-3-2001 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994)
  • LST EN ISO 11664-5:2011 Colorimetry - Part 5: CIE 1976 L*u*v*Colour space and u', v' uniform chromaticity scale diagram (ISO 11664-5:2009)

American Society of Civil Engineers (ASCE), Thickness Uniformity

  • ASCE 54-10-2010 Standard Guideline for the Geostatistical Estimation and Block-Averaging of Homogeneous and Isotropic Saturated Hydraulic Conductivity

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Thickness Uniformity

  • IEEE N42.27-1999 American National Standard for Determination of Uniformity of Solid Gamma-Emitting Flood Sources

Professional Standard - Railway, Thickness Uniformity

  • TB/T 2539-1995 Test method for current distribution unevenness of diesel locomotive traction motor

International Federation of Trucks and Engines, Thickness Uniformity

Professional Standard - Medicine, Thickness Uniformity

  • YY/T 0457.3-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 3:Determination of the luminance distribution and luminance non-uniformity

Professional Standard - Press and Publication, Thickness Uniformity

  • CY/T 104.4-2014 Graphic technology-Test methods for printability of paper and board Part 4: Printing uniformity

CEN - European Committee for Standardization, Thickness Uniformity

  • EN ISO 11664-5:2011 Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u'@ v' uniform chromaticity scale diagram
  • EN ISO 11664-5:2016 Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u'@ v' uniform chromaticity scale diagram

ES-UNE, Thickness Uniformity

  • UNE-EN ISO 11664-5:2017 Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram (ISO/CIE 11664-5:2016)

BE-NBN, Thickness Uniformity

  • NBN-ISO 9608:1989 V-belts - Uniformity of belts - Centre distance variation - Spécifications and test method

Yunnan Provincial Standard of the People's Republic of China, Thickness Uniformity

  • DB53/T 512-2013 Determination of Blending Uniformity of Secondary Re-cut Microwave Expanded Shredded Stems by Near Infrared Spectroscopy

European Committee for Electrotechnical Standardization（CENELEC）, Thickness Uniformity

  • EN 61262-3:1994 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 3: Determination of the Luminance Distribution and Luminance Non-Uniformity

American Welding Society (AWS), Thickness Uniformity

  • WRC 180:1973 Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern)

  Uniformity detection, Uniformity detection, Uniformity, Attenuation Uniformity, Uniformity detection, Uniformity experiment, Light Uniformity, Quality Uniformity, field uniformity, temperature uniformity, Uniformity Test, Light Uniformity, Uniformity calculation, Uniformity Test, Thickness Uniformity, Capacity Uniformity, optical uniformity, Uniformity Test, optical uniformity, Thickness Uniformity.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved