ZH
RU
ES

solid specific surface energy

solid specific surface energy, Total:371 items.

In the international standard classification, solid specific surface energy involves: Particle size analysis. Sieving, Powder metallurgy, Rubber and plastics products, Linear and angular measurements, Adhesives, Measurement of volume, mass, density, viscosity, Waxes, bituminous materials and other petroleum products, Graphic technology, Ceramics, Radiation protection, Mining and quarrying, Products of the chemical industry, Paints and varnishes, Sports equipment and facilities, Vocabularies, Furniture, Analytical chemistry, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Measurement of fluid flow, Insulating fluids, Optics and optical measurements, Road vehicle systems, Capacitors, Surface treatment and coating, Water quality, Lubrication systems, Wastes, TESTING, Non-textile floor coverings, Domestic, commercial and industrial heating appliances, Metrology and measurement in general, Radiation measurements, Measurement of force, weight and pressure, Protection of and in buildings, Non-ferrous metals, Piezoelectric and dielectric devices, Coatings and related processes used in aerospace industry, Conducting materials, Bearings, Construction materials.

International Organization for Standardization (ISO), solid specific surface energy

ISO 9277:2022 Determination of the specific surface area of solids by gas adsorption — BET method
ISO 19712-3:2022 Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes
ISO 9277:1995 Determination of the specific surface area of solids by gas adsorption using the BET method
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
ISO 19403-2:2017 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO/CD 19403-2:2023 Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO/DIS 19403-2:2023 Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO 19403-5:2017 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO 19712-2:2007 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
ISO 4319:1977 Surface active agents; Detergents for washing fabrics; Guide for comparative testing of performance
ISO 4211:1979 Furniture; Assessment of surface resistance to cold liquids
ISO 4198:1984 Surface active agents; Detergents for hand dishwashing; Guide for comparative testing of performance
ISO 7535:1984 Surface active agents; Detergents for domestic machine dishwashing; Guide for comparative testing of performance
ISO/CD 19403-5:2023 Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO/DIS 19403-5:2023 Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO 19712-1:2008 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
ISO/TS 24137:2023 Plain bearings — Surface modification by press fitting solid lubricants combined with micro dimple processing
ISO 7503-1:1988 Evaluation of surface contamination; part 1: beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters
ISO 7503-3:1996 Evaluation of surface contamination - Part 3: Isomeric transition and electron capture emitters, low energy beta-emitters (<(Index)max> 0,15 MeV)

German Institute for Standardization, solid specific surface energy

DIN ISO 9277:2014-01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN 66126:2015-08 Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
DIN EN ISO 19712-3:2022-07 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022); German version EN ISO 19712-3:2022
DIN 66132:1975 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Duembgen
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN EN 828:2013-04 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface; German version EN 828:2013
DIN 66132:1975-07 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Dümbgen
DIN EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface; German version EN 828:2013
DIN 55660-2:2011 Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle
DIN 66134:1998 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN EN ISO 19712-2:2013-04 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007); German version EN ISO 19712-2:2013
DIN EN 12720:1997 Furniture - Assessment of surface resistance to cold liquids (ISO 4211:1979, modified); German version EN 12720:1997
DIN 66134:1998-02 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
DIN EN ISO 19403-2:2020-04 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017); German version EN ISO 19403-2:2020
DIN 66126:2015 Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
DIN ISO 9277:2014 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN CEN/TS 15862:2012-11*DIN SPEC 91233:2012-11 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions; German version CEN/TS 15862:2012
DIN 19529:2009 Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic substances at a liquid to solid ratio of 2 l/kg
DIN EN 1557:1997-03 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission; German version EN 1557:1996
DIN EN ISO 13565-2:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996); German version EN ISO 13565-2:1997
DIN EN 60384-18:2017-03 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<(Index)2>) and non-solid electrolyte (IEC 60384-18:2016); German version EN 60384-18:2016 ...
DIN 19529:2015 Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic and organic substances at a liquid to solid ratio of 2 l/kg
DIN 55660-5:2012 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
DIN EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
DIN EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
DIN ISO 7503-1:1990 Evaluation of surface contamination; beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters; identical with ISO 7503-1:1988
DIN EN ISO 19403-5:2020-04 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017); G...
DIN EN ISO 19403-5:2023-10 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO/DIS 19403-5:2023...
DIN EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN EN 60384-18:2007 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<(Index)2>) and non-solid electrolyte (IEC 60384-18:2007); German version EN 60384-18:2007
DIN EN 16845-1:2017-05 Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1: Dyes on porous surfaces; German version EN 16845-1:2017
DIN EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
DIN IEC 60093:1993 Methods of test for insulating materials for electrical purposes; volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980); German version HD 429 S1:1983
DIN EN 12720:2014 Furniture - Assessment of surface resistance to cold liquids; German version EN 12720:2009+A1:2013

Korean Agency for Technology and Standards (KATS), solid specific surface energy

KS A 0094-2014(2019) Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS M ISO 4319:2007 Surface active agents－Detergents for washing fabrics－Guide for comparative testing of performance
KS M ISO 4198:2003 Surface active agents-Detergents for hand dishwashing-Guide for comparative testing of performance
KS M ISO 4198-2014(2019) Surface active agents — Detergents for hand dishwashing — Guide for comparative testing of performance
KS M ISO 4198:2014 Surface active agents — Detergents for hand dishwashing — Guide for comparative testing of performance
KS G ISO 4211:2009 Test method of surface resistance to cold liquids for furniture
KS G ISO 4211-2:2009 Furniture-Tests for surfaces-Part 2:Assessment of resistance to wet heat
KS G ISO 4211-2:2014 Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat
KS M ISO 4319-2007(2017) Surface active agents－Detergents for washing fabrics－Guide for comparative testing of performance
KS M ISO 4319-2007(2022) Surface active agents－Detergents for washing fabrics－Guide for comparative testing of performance
KS M ISO 7535-2007(2018) Surface active agents－Detergents for domestic machine dishwashing－Guide for comparative testing of performance
KS C IEC 62631-3-2:2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS M ISO 7535:2007 Surface active agents－Detergents for domestic machine dishwashing－Guide for comparative testing of performance
KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS L ISO 18757-2012(2017) Fine ceramics－Determination of specific surface area of ceramic powders by gas adsorption using the BET method
KS L ISO 18757-2012(2022) Fine ceramics－Determination of specific surface area of ceramic powders by gas adsorption using the BET method
KS M ISO 8503-1-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 1：Specifications and definitions for ISO surf
KS C IEC 60093:2004 Methods of test for volume resistivity and surface resistivity of solid electric insulating materials
KS B ISO 10774-2005(2010) Solid fuelled heaters－Test method for determining allowable clearances from combustible surfaces
KS M ISO 8503-4-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface p
KS M ISO 8503-3-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 3：Method for the calibration of ISO surface p
KS B ISO 13565-2-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve
KS C IEC 60384-18:2018 Fixed capacitors for use in electronic equipment — Part 18: Sectional specification — Fixed aluminium electrolytic surface mount capacitors with solid(MnO 2 ) and non-solid electrolyte
KS C IEC 60384-18-2023 Fixed capacitors for use in electronic equipment Part 18: Fixed aluminum electrolytic surface mount capacitors with solid (Mno2) and non-solid electrolytes in segmented specifications
KS C IEC 60384-3:2018 Fixed capacitors for use in electronic equipment — Part 3: Sectional specification — Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
KS C IEC 62631-3-2-2017(2022) Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS C IEC 60384-24-2009(2015) Fixed capacitors for use in electronic equipment－Part 24：Sectional specification－Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
KS C IEC 60384-25-2009(2015) Fixed capacitors for use in electronic equipment－Part 25：Sectional specification－Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
KS M ISO 8503-2-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 2：Method for the grading of surface profile o
KS A ISO 7503-1-2003(2018) Evaluation of surface contamination－Part 1：Beta-emitters(maximum beta energy greater than 0.15 MeV) and alpha-emitters
KS M ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface profile comparators and for the determination of surface

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, solid specific surface energy

GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 2922-1982 Chemical reagents--Determination of specific surface area of solid supports used in chromatography
GB/T 42303-2023 Guidelines for comparative tests of the performance of surfactant-based detergents for fabric washing
GB/T 22689-2008 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
GB/T 1410-2006 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
GB/T 1410-1989 Methods of test for volume resistivity and surface resistivity of solid insulating materials
GB/T 24692-2009 Surface active agents.Detergents for domestic machine dishwashing.Guider for comparative testing of performance
GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
GB/T 6346.3-2015 Fixed capacitors for use in electronic equipment.Part 3:Sectional specification.Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
GB/T 20170.2-2006 Test method of physical characters of rare earth metals and compounds.Determination on specific surface area of rare earth compounds
GB/T 11312-1989 Test methods for SAW properties of piezoelectric ceramics and crystals
GB/T 14056-1993 Evaluation of surface contamination.Part 1:Beta-emitters(maximum beta energy greater than 0.15MeV)and alpha-emitters
GB/T 6346.25-2018 Fixed capacitors for use in electronic equipment.Part 25:Sectional specification.Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte

American National Standards Institute （ANSI), solid specific surface energy

ANSI/ICPA SS-1-2001 Performance Standard for Solid Surface Materials
ANSI/ASTM F2569:2011 Test Method For Evaluating The Force Reduction Properties Of Surfaces For Athletic Use
ANSI/ASTM D2275:2001 Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface (10.01)

Association Francaise de Normalisation, solid specific surface energy

NF X11-620:1996 Determination of the specific surface area of solids by gas adsorption using the bet method.
NF T54-370-3*NF EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3 : determination of properties - Solid surface shapes
NF EN ISO 105-Z01:1996 Textiles - Essais de solidité des teintures - Partie Z01 : solidité des teintures aux métaux dans les bains de teinture : sels de chrome.
NF EN 828:2013 Adhésifs - Mouillabilité - Détermination par mesurage de l'angle de contact et de l'énergie superficielle libre de la surface solide
NF T76-150*NF EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
NF T30-131-2*NF EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2 : determination of the surface free energy of solid surfaces by measuring the contact angle
NF EN ISO 19403-2:2020 Peintures et vernis - Mouillabilité - Partie 2 : détermination de l'énergie libre de surface des surfaces solides par la mesure de l'angle de contact
NF T54-370-2*NF EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2 : determination of properties - Sheet goods
E25-032:1986 Fasteners. Coatings (and surface treatments) for protection against corrosion. Comparative presentment.
NF C26-631-3-2*NF EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2 : determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
NF E25-032:1986 Éléments de fixation - Revêtements (et traitements de surface) destinés à la protection contre la corrosion - Présentation comparative.
NF T73-801:1979 Surface active agents. Detergents for washing fabrics. Guide for comparative testing of performance.
NF EN ISO 19712-3:2022 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 3 : détermination des propriétés - Produits mis en forme
NF EN ISO 19712-2:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 2 : détermination des propriétés - Produits en feuilles
UTE C26-141U*UTE C26-141:1976 Solid insulating materials. Varnished fabrics. Relevant article sheets.
XP X30-475*XP CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
NF D60-051-1:2009 Furniture - Assessment of surface resistance to cold liquids.
NF D60-051-1:1997 Furniture. Assessment of surface resistance to cold liquids.
NF EN ISO 105-X07:1997 Textiles - Essais de solidité des teintures - Partie X07 : solidité des teintures à la surteinture : laine.
XP CEN/TS 15862:2012 Caractérisation des déchets - Essai de lixiviation de conformité - Essai de lixiviation en bâchée unique pour des monolithes avec un rapport liquide/ surface (L/A) fixe, pour des prises d'essai de dimensions minimales fixes
T73-803:1985 Surface active agents. Detergents for domestic machine dishwashing. Guide for comparative testing of performance.
T73-802:1985 Surface active agents. Detergents for hand dishwashing. Guide for comparative testing of performance.
NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
NF T30-131-5*NF EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5 : determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
NF C93-112-18:2008 Fixed capacitors for use in electronic equipment - Part 18 : sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte.
NF EN 60384-18:2016 Condensateurs fixes utilisés dans les équipements électroniques - Partie 18 : spécification intermédiaire - Condensateurs fixes électrolytiques à l'aluminium pour montage en surface à électrolyte solide (MnO2) et non solide
NF EN ISO 19403-5:2020 Peintures et vernis - Mouillabilité - Partie 5 : détermination des fractions polaire et dispersive de la tension superficielle des liquides à partir de l'angle de contact avec un solide n'ayant qu'une contribution de dispersion à son énergie de...
NF C93-112-18*NF EN 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18 : sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
XP ISO/TS 24137:2023 Paliers lisses - Modification de la surface par fixation par pression de lubrifiants solides combinée à un traitement par micro-cavités
NF C93-112-25*NF EN 60384-25:2006 Fixed capacitors for use in electronic equipment - Part 25 : sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
NF EN ISO 105-J01:2000 Textiles - Essais de solidité des teintures - Partie J01 : principes généraux du mesurage de la couleur de surface
NF EN 1557:1996 Agents de surface - Caractérisation colorimétrique des liquides (produits) colorés optiquement clairs par composantes trichromatiques X, y et Z en transmittance
NF B44-411-1*NF EN 16845-1:2017 Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1 : dyes on porous surfaces
NF EN 16845-1:2017 Photocatalyse - Activité chimique anti-salissures à l'aide de matières organiques adsorbées dans des conditions solide/solide - Partie 1 : colorants sur des surfaces poreuses
NF T73-421*NF EN 1557:1996 Surface active agents. Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission.
NF E05-022:1998 Geometrical Product Specifications (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 2 : height characterization using the linear material ratio curve.
NF C93-112-24*NF EN 60384-24:2006 Fixed capacitors for use in electronic equipment - Part 24 : sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
NF C93-112-24*NF EN 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24 : Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
NF EN 62631-3-2:2016 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-2 : détermination des propriétés résistives (Méthodes en courant continu) - Résistance superficielle et résistivité superficielle
NF EN 15330-4:2022 Sols sportifs - Surfaces en gazon synthétique et surfaces en textile aiguilleté principalement destinées à l'usage en extérieur - Partie 4 : spécifications relatives aux couches de souplesse utilisées avec les sols sportifs en gazon synthétiqu...

AENOR, solid specific surface energy

UNE-ISO 9277:2009 Determination of the specific surface area of solids by gas adsorption using the BET method
UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
UNE-EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
UNE-EN 12720:2009+A1:2014 Furniture - Assessment of surface resistance to cold liquids
UNE 55800:1985 SURFACE ACTIVE AGENTS. DETERGENTS FOR WASHING FABRICS. GUIDE FOR COMPARATIVE TESTING OF PERFORMANCE
UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
UNE 55829:1986 SURFACE ACTIVE AGENTS. DETERGENTS FOR HAND DISHWASHING. GUIDE FOR COMPARATIVE TESTING OF PERFORMANCE
UNE 55828:1986 SURFACE ACTIVE AGENTS. DETERGENTS FOR DOMESTIC MACHINE DISHWASHING. GUIDE FOR COMPARATIVE TESTING OF PERFORMANCE
UNE-EN ISO 13565-2:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO CURVE (ISO 13565-2:1996).
UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.
UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.
UNE-EN 1557:1997 SURFACE ACTIVE AGENTS. COLORIMETRIC CHARACTERIZATION OF OPTICALLY CLEAR COLOURED LIQUIDS (PRODUCTS) AS X, Y, Z TRISTIMULUS VALUES IN TRANSMISSION.
UNE-EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)

Japanese Industrial Standards Committee (JISC), solid specific surface energy

JIS Z 8830:2013 Determination of the specific surface area of powders (solids) by gas adsorption -- BET method
JIS Z 8830 ERRATUM 1:2002 Determination of the specific surface area of powders (solids) by gas adsorption method (Erratum 1)
JIS Z 8830:1990 Determination of the specific surface area of powders by gas adsorption methods
JIS Z 8830:2001 Determination of the specific surface area of powders (solids) by gas adsorption method
JIS C 2139-3-2:2018 Dielectric and resistive properties of solid insulating materials -- Part 3-2: Determination of resistive properties (DC methods) -- Surface resistance and surface resistivity
JIS C 2139:2008 Solid electrical insulating materials -- Methods for the determination of volume resistivity and surface resistivity
JIS B 0671-2:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve
JIS C 5101-18:2010 Fixed capacitors for use in electronic equipment -- Part 18: Sectional specification -- Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
JIS C 5101-18:2019 Fixed capacitors for use in electronic equipment -- Part 18: Sectional specification -- Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte

European Committee for Standardization (CEN), solid specific surface energy

EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
prEN 828-1992 Adhesives; wettability; determination by measurement of contact angle and critical surface tension of solid surface
EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
EN 1569:1999 Surfaces for sports areas - Determination of the behaviour under a rolling load
CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
EN 828:1997 Adhesives - Wettability - Determination by Measurement of Contact Angle and Critical Surface Tension of Solid Surface
EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
PD CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
EN 16845-1:2017 Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1: Dyes on porous surfaces
EN ISO 13565-2:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part 2: Height Characterization Using the Linear Material Ratio Curve
EN ISO 8503-1:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abr
EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced

ES-UNE, solid specific surface energy

UNE-EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
UNE-EN ISO 19403-2:2021 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
UNE-EN ISO 19403-5:2021 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
UNE-EN 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte (Endorsed by AENOR in October of 2016.)
UNE-EN 16845-1:2019 Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1: Dyes on porous surfaces
UNE-EN 60384-18-1:2007 Fixed capacitors for use in electronic equipment -- Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) electrolyte - Assessment level EZ (IEC 60384-18-1:2007). (Endorsed by AENOR in September...
UNE-EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (Endorsed by AENOR in April of 2016.)
UNE-EN 60384-3:2016 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte (Endorsed by AENOR in November of 2016.)

Danish Standards Foundation, solid specific surface energy

DS/EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
DS/EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
DS/EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
DS/ISO 4211:1981 Furniture. Assessment of surface resistance to cold liquids
DS/ISO 7535:2011 Surface active agents - Detergents for domestic machine dishwashing - Guide for comparative testing of performance
DS/EN ISO 13565-2/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
DS/EN ISO 13565-2:1998 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
DS/EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
DS/EN 1557:1997 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission
DS/IEC 93:1982 Methods of test for volume resistivity of solid electrical insulating materials
DS/EN 60384-18:2007 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
DS/CECC 30801-802:2005 Detail specification: Fixed tantalum surface mount capacitors with solid electrolyte and porous anode: Extended range
DS/EN 933-5:1998 Tests for geometrical properties of aggregates - Part 5:Determination of percentage of crushed and broken surfaces in coarse aggregate particles
DS/EN 60384-3:2007 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte

British Standards Institution (BSI), solid specific surface energy

BS ISO 9277:2022 Tracked Changes. Determination of the specific surface area of solids by gas adsorption. BET method
21/30419294 DC BS ISO 9277. Determination of the specific surface area of solids by gas adsorption. BET method.
BS EN 828:2013 Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface
BS EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Sheet goods
BS EN ISO 19403-2:2020 Paints and varnishes. Wettability - Determination of the surface free energy of solid surfaces by measuring the contact angle
BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
BS EN 1569:1999 Surfaces for sports areas - Determination of the behaviour under a rolling load
BS EN 828:1998 Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface
BS 4359-1:1996 Determination of the specific surface area of powders. BET method of gas adsorption for solids (including porous materials)
BS EN ISO 19712-3:2022 Tracked Changes. Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
BS ISO 19712-1:2009 Plastics. Decorative solid surfacing materials. Classification and specifications
BS EN ISO 19712-1:2013 Plastics. Decorative solid surfacing materials. Classification and specifications
BS EN ISO 19403-5:2020 Paints and varnishes. Wettability - Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
BS EN 60384-18:2007 Fixed capacitors for use in electronic equipment — Part 18: Sectional specification — Fixed aluminium electrolytic surface mount capacitors with solid (Mn02) and non-solid electrolyte
BS EN 60384-18:2016 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
BS EN 1517:2000 Surfaces for sports areas - Determination of resistance to impact
BS EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
BS EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS EN 16845-1:2017 Photocatalysis. Anti-soiling chemical activity using adsorbed organics under solid/solid conditions. Dyes on porous surfaces
BS EN ISO 13565-2:1998 Geometric Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Height characterization using the linear material ration curve
BS EN ISO 13565-2:1997 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the linear material ration curve
BS EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials. Determination of resistive properties (DC Methods). Surface resistance and surface resistivity
BS EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure
BS EN IEC 60384-25:2021 Tracked Changes. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
BS EN IEC 60384-24:2021 Tracked Changes. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
PD ISO/TS 24137:2023 Plain bearings. Surface modification by press fitting solid lubricants combined with micro dimple processing
BS EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS EN 60384-3:2016 Tracked Changes. Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed tantalum electrolytic capacitors with solid (MnO<sub>2</sub>) electrolyte
BS EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast
BS EN 60384-24:2006 Fixed capacitors for use in electronic equipment - Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
BS EN 60384-24:2015 Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
BS EN 60384-25:2015 Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
BS EN 60384-25:2006 Fixed capacitors for use in electronic equipment - Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
BS EN 61788-15:2011 Superconductivity. Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies
BS EN 60384-18-1:2007 Fixed capacitors for use in electronic equipment — Part 18-1: Blank detail specification — Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) electrolyte — Assessment level EZ
BS EN 60384-3:2007 Fixed capacitors for use in electronic equipment - Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte

U.S. Military Regulations and Norms, solid specific surface energy

ARMY UFGS-06 61 16-2010 SOLID POLYMER (SOLID SURFACING) FABRICATIONS

US-FCR, solid specific surface energy

FCR COE CEGS 06650-2000 SOLID POLYMER (SOLID SURFACING) FABRICATIONS

AT-ON, solid specific surface energy

ONORM B 2606-1-1997 Surfaces for sports areas -Lawns
ONORM S 1407-1976 Textile floor coverings; determination of surface pile density and pile fibre volume ratio of pile carpets

RO-ASRO, solid specific surface energy

STAS 11289-1987 VALUES OF SUPERFICIAL TENSION OF HYDROMETRICAL LIQUIDS
STAS 6107-1981 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for volume and sur- face resistivity and of insution resistance
STAS 10369-1975 SOLID ELECTRICAL INSULATING MATERIALS Test methods for determining the relative resistance to breakdown by surface discharges
STAS 11654-1980 High capacity belt conveyers for surface raining FIXED BELT AND FLITTING TRANSOMST ypification

RU-GOST R, solid specific surface energy

GOST 8.428-1981 State system for ensuring the uniformity of measurements. Areometers. The values of coefficients of surface tension of liquids
GOST ISO 4211-2012 Furniture. Assessment of surface resistance to cold liquids
GOST 33096-2014 Goods of household chemistry. Method for determination of efficiency of rust removal from solid surface
GOST R ISO 5904-1995 Gymnastic equipment. Landing mats and surfaces for floor exercises. Determination of resistance to slipping
GOST R 8.667-2009 State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion, specific energy of combustion and volumetric energy of combustion (combustion calorimeters)
GOST R 50499-1993 Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity
GOST R ISO 5903-1995 Gymnastic equipment. Landing mats and surfaces for floor exercises. Determination of hardness and impact damping
GOST R 54963-2012 Reinforcing alkali-resistant glass fibre meshes for building faces. Method for determination of the mechanical properties

American Society for Testing and Materials (ASTM), solid specific surface energy

ASTM D2320-98(2003) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D2320-98 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM G204-21 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
ASTM C1127/C1127M-15(2023) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM G204-15 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
ASTM C1127-01 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM C1471/C1471M-05(2021) Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM C1471/C1471M-22 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM D2275-22 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
ASTM F2569-07 Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
ASTM F2569-11 Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use

CZ-CSN, solid specific surface energy

CSN 72 2623 Cast.1-1977 Solid facing bricks - C1P Material specification
CSN 01 5185-1972 Determination of specífic suríace areas of solids. Sorption methods
CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities
CSN IEC 93:1993 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

Professional Standard - Machinery, solid specific surface energy

JB/T 8271-2015 Comparison scale for surface defect of photoconductor of electrostatic copying process
JB/T 3282-1999 Test methods for determining the relative resistance of insulating meterials to breardown by surface discharges

SE-SIS, solid specific surface energy

SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio
SIS SS IEC 93:1983 Methods of test for volume résistivity and surface resistivityof solid electrical insulating materials
SIS 83 91 18-1973 Furniture and fittings for housing. Estimation of surface resistance to liquids

Professional Standard - Building Materials, solid specific surface energy

JC/T 995-2006 Zirconia powder with low specific surface area and better sinter ability

Taiwan Provincial Standard of the People's Republic of China, solid specific surface energy

CNS 14389-1999 Methods of measuring for specific surface area of fine ceramic powders by gas adsorption

Professional Standard - Nuclear Industry, solid specific surface energy

EJ/T 709-1992 Stationary Low Energy X and Gamma Emitter Personal Surface Contamination Monitor

Indonesia Standards, solid specific surface energy

SNI 13-6661-2002 Specific surface area measurement for mineral powder by nitrogen gas adsorption
SNI ISO 4211:2015 Furniture – Assessment of surface resistance to cold liquids

国家市场监督管理总局、中国国家标准化管理委员会, solid specific surface energy

GB/T 39713-2020 Testing mothed for specific surface area of ceramic powders—BET gas adsorption operation
GB/T 31838.3-2019 Solid insulating materials—Dielectric and resistive properties—Part 3: Resistive properties (DC methods)—Surface resistance and surface resistivity
GB/T 6346.24-2021 Fixed capacitors for use in electronic equipment—Part 24: Sectional specification—Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte

BE-NBN, solid specific surface energy

NBN M 02-010-1979 Determination of the gross calorific value of a solid fuel and cal-culation of its net calorific value
NBN T 63-303-1980 Surface active agents - Detergents for washing fabrics - Guide for comparative testing of performance
NBN T 63-304-1986 Surface active agents - Detergents for hand dishwashing - Guide for comparative testing of performance
NBN T 63-109-1982 Surface active agents - Washing powders - Determination of apparent density-Method by measuring the mass of a given volume
NBN T 63-305-1986 Surface active agents - Detergents for domestic machine dishwashing-Guide for comparative testing of performance

Professional Standard - Agriculture, solid specific surface energy

GB 2922-1982 Test method for specific surface area of chromatographic carrier for chemical reagents
GB 1410-1978 Test methods for insulation resistance, volume resistivity and surface resistivity of solid electrical insulating materials

Standard Association of Australia （SAA）, solid specific surface energy

IEC 62631-3-2:2023 Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
IEC 62631-3-2:2023 CMV Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
AS 2360.8.1:2007 Hydrometry - Measurement of free surface flow in closed conduits - Methods
AS 2148:2004 Milk and liquid milk products - Density hyrometers for use in products with a surface tension of approximately 45 mN/m

International Electrotechnical Commission (IEC), solid specific surface energy

IEC 62631-3-2:2015 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity
IEC 61137:1992 Radiation protection instrumentation; installed personnel surface contamination monitoring assemblies; low energy X and gamma emitters
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
IEC 60384-18:2007 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<(Index)2>) and non-solid electrolyte
IEC 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO₂) and non-solid electrolyte
IEC 60384-24:2015/COR1:2016 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte; Corrigendum 1

Professional Standard - Energy, solid specific surface energy

NB/SH/T 0571-2021 Determination of Specific Surface Area and Micropore Volume of Zeolite in Catalyst

Professional Standard - Non-ferrous Metal, solid specific surface energy

YS/T 438.4-2001 Methods for physical performance determination of sandy alumina.Determination of specific surface area.B.E.T. method
YS/T 438.4-2013 Methods for physical performance determination of sandy alumina.Part 4:B.E.T method for determination of specific surface area

Lithuanian Standards Office , solid specific surface energy

LST ISO 4198:1997 Surface active agents. Detergents for hand dishwashing; Guide for comparative testing of performance
LST EN 12720-2009 Furniture - Assessment of surface resistance to cold liquids
LST EN 828-2000 Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surface
LST ISO 7535:1997 Surface active agents. Detergents for domestic machine dishwashing. Guide for comparative testing of performance
LST EN 1557-2002 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission
LST HD 429 S1-2002 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980)
LST EN ISO 13565-2:2001 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996)
LST EN 60384-18-2007 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte (IEC 60384-18:2007)

European Standard for Electrical and Electronic Components, solid specific surface energy

CECC 30 801- 801 ISSUE 2-1992 Fixed Tantalum Surface Mounting Capacitors with Solid Electrolyte, Porous Anode (En)

IN-BIS, solid specific surface energy

KR-KS, solid specific surface energy

KS M ISO 7535-2007(2023) Surface active agents－Detergents for domestic machine dishwashing－Guide for comparative testing of performance
KS C IEC 62631-3-2-2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS C IEC 60384-18-2018(2023) Fixed capacitors for use in electronic equipment — Part 18: Sectional specification — Fixed aluminium electrolytic surface mount capacitors with solid(MnO 2 ) and non-solid electrolyte
KS C IEC 60384-18-2018 Fixed capacitors for use in electronic equipment — Part 18: Sectional specification — Fixed aluminium electrolytic surface mount capacitors with solid(MnO 2 ) and non-solid electrolyte
KS C IEC 60384-3-2018 Fixed capacitors for use in electronic equipment — Part 3: Sectional specification — Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
KS C IEC 60384-3-2018(2023) Fixed capacitors for use in electronic equipment — Part 3: Sectional specification — Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., solid specific surface energy

ASHRAE 105-2014 Standard Methods of Measuring@ Expressing and Comparing Building Energy Performance and Greenhouse Gas Emissions
ASHRAE 105 ERTA-2014 Standard Method of Determining@ Expressing@ and Comparing Building Energy Performance and Greenhouse Gas Emissions
ASHRAE 105 SPANISH-2014 Métodos Estándar para Determinar@ Expresar y Comparar la Performance Energética en Construcciones y las Emisiones de los Gases de Efecto Invernadero

DE-VDA, solid specific surface energy

VDA 280-3-2001 Colorimetry for motor vehicles - Colour measurement of automotive paint finishes - Solid paints

Group Standards of the People's Republic of China, solid specific surface energy

T/CPCIF 0140-2021 Catalyst carrier— Determination of surface area and pore volume for quasi-thin-water aluminit— Nitrogen adsorption method

未注明发布机构, solid specific surface energy

BS EN ISO 13565-2:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Surfaces having stratified functional properties — Part 2 : Height characterization using linear material ratio curve
DIN EN 933-5:1998 Tests for geometrical properties of aggregates — Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles

Society of Automotive Engineers (SAE), solid specific surface energy

SAE AMS1531C-2001 Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids
SAE AMS1531-1978 CLEANER FOR AIRCRAFT EXTERIOR SURFACES Wipe-on, Wipe-off, Containing Suspended Abrasive Solids
SAE AMS1531B-2000 CLEANER FOR AIRCRAFT EXTERIOR SURFACES Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids
SAE AMS1531A-1981 CLEANER FOR AIRCRAFT EXTERIOR SURFACES Wipe-on, Wipe-off, Containing Suspended Abrasive Solids
SAE AMS1531D-2020 Cleaner for Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids
SAE AMS1531D-2008 Cleaner for Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids

SAE - SAE International, solid specific surface energy

SAE AMS1531B-1990 Cleaner for Aircraft Exterior Surfaces@ Wipe-On@ Wipe-Off@ Containing Suspended Abrasive Solids

Defense Logistics Agency, solid specific surface energy

DLA DESC-DWG-87016 REV N-2012 RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, 20 PIN, LEADLESS CHIP CARRIER
DLA DSCC-DWG-87015 REV F-2012 RESISTOR NETWORKS, FIXED, FILM, SURFACE MOUNT, 28 PIN, LEADLESS CHIP CARRIER
DLA DESC-DWG-87014 REV K-2013 RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, 16 PIN, LEADLESS CHIP CARRIER

European Committee for Electrotechnical Standardization（CENELEC）, solid specific surface energy

EN 60384-18:2007 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
EN 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
HD 429 S1-1983 Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials
EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity

Electronic Components, Assemblies and Materials Association, solid specific surface energy

ECA EIA-60384-18-2014 Fixed Capacitors for Use in Electronic Equipment - Part 18: Sectional Specification - Fixed Aluminium Electrolytic Surface Mount Capacitors with Solid (MnO2) and Non-Solid Electrolyte

ECIA - Electronic Components Industry Association, solid specific surface energy

EIA-60384-18-2014 Fixed Capacitors for Use in Electronic Equipment – Part 18: Sectional Specification – Fixed Aluminium Electrolytic Surface Mount Capacitors with Solid (MnO2) and Non-Solid Electrolyte
EIA-60384-18-2017 Fixed Capacitors for Use in Electronic Equipment - Part 18: Sectional Specification - Fixed Aluminium Electrolytic Surface Mount Capacitors with Solid (MnO2) and Non-solid Electrolyte
EIA-60384-3-2014 Fixed Capacitors for Use in Electronic Equipment – Part 3: Sectional Specification – Surface Mount Fixed Tantalum Electrolytic Capacitors with Manganese Dioxide Solid Electrolyte

Hebei Provincial Standard of the People's Republic of China, solid specific surface energy

DB13/T 2768.4-2018 Graphene powder material detection method part 4: specific surface area, pore volume and pore diameter BET method

AASHTO - American Association of State Highway and Transportation Officials, solid specific surface energy

T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-1993 Standard Specification for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Eighteenth Edition)

Professional Standard - Aerospace, solid specific surface energy

QJ 3279-2006 Test method for constant load performance of solid rocket motor liner interface bonding

The American Road & Transportation Builders Association, solid specific surface energy

AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens

Guangdong Provincial Standard of the People's Republic of China, solid specific surface energy

DB44/T 1232-2013 Test Method for Determination of Surface Tension of Solid Coatings, Substrates, and Pigments Contact Angle Method

工业和信息化部, solid specific surface energy

SJ/T 11613-2016 Detailed Specification for Electronic Components Type CA45 Surface Mount MNO2 Solid Electrolyte Tantalum Fixed Capacitor Evaluation Level EZ