ZH

RU

ES

low temperature dielectric constant

low temperature dielectric constant, Total:319 items.

In the international standard classification, low temperature dielectric constant involves: Insulating fluids, Components and accessories for telecommunications equipment, Non-metalliferous minerals, Piezoelectric and dielectric devices, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Electronic components in general, Printed circuits and boards, Rubber, Pipeline components and pipelines, Resistors, Fuels, Products of the textile industry, Capacitors, Insulation, Magnetic materials, Electrical and electronic testing, Organic chemicals, Analytical chemistry, Conducting materials, Plastics, Lubricants, industrial oils and related products, Iron and steel products, Components for electrical equipment, Electrical engineering in general, Rubber and plastics products, Electrical wires and cables, Applications of information technology, TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING, Protection against crime, Radiocommunications.


Korean Agency for Technology and Standards (KATS), low temperature dielectric constant

  • KS C 2136-1996(2021) Testing methods for complex permittivity (Dielectric constant) of solid electrical insulating materials at high frequencies and high temperatures
  • KS C 2136-1996(2016) Testing methods for complex permittivity (Dielectric constant) of solid electrical insulating materials at high frequencies and high temperatures
  • KS C 2135-1996(2021) Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
  • KS C 2150-2008(2018) Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
  • KS C 2134-1996 Testing method for dissipation factor and permittivity parallel with laminations of laminated sheet and plate materials
  • KS C 2150-2008 Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
  • KS C 2117-1996 Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
  • KS C 2117-1996(2021) Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
  • KS C 2135-1996(2016) Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
  • KS C IEC 62631-2-1:2020 Dielectric and resistive properties of solid insulating materials —Part 2-1: Relative permittivity and dissipation factor —Technical frequencies(0.1 Hz ~ 10 MHz) — AC methods
  • KS C 2135-1996 Testing methods for AC loss characteristics and permittivity(Dielectric constant) of solid electrical insulation
  • KS C 2117-1996(2016) Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
  • KS C IEC 60250:2003 Recommended methodRecommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengthss for the determination of the permittivi
  • KS C IEC 60811-5-1-2006(2016) Insulatinig and sheathing materials of electric and optical cables-Common test methods-Part 5-1:Methods specific to filling compounds-Drop-point-Separation of oil-Lower temperature brittleness-Total a
  • KS C 2134-1996(2016) Testing method for dissipation factor and permittivity parallel with laminations of laminated sheet and plate materials
  • KS C IEC 60811-5-1:2021 Insulating and sheathing materials of electric and optical cables —Common test methods — Part 5-1: Methods specific to filling compounds — Drop-point — Separation of oil — Lower temperature brittlenes
  • KS C 2136-1996 Testing methods for complex permittivity (Dielectric constant) of solid electrical insulating materials at high frequencies and high temperatures
  • KS C IEC 61338-1-4:2018 Waveguide type dielectric resonators ─ Part 1-4: General information and test conditions ─ Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave fre
  • KS C IEC 61338-1-3:2018 Waveguide type dielectric resonators ― Part 1-3: General information and test conditions ― Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • KS C IEC 61338-1-4-2023 Waveguide type dielectric resonators Part 1-4: General information and test conditions Method for measurement of complex relative permittivity of dielectric resonator materials at millimeter-wave frequencies
  • KS C IEC 61338-1-3-2023 Waveguide type dielectric resonators Part 1-3: General information and test conditions Method for measurement of complex relative permittivity of dielectric resonator materials at microwave frequencies
  • KS C IEC 60811-301:2016 Electric and optical fibre cables — Test methods for non-metallic materials — Part 301: Electrical tests — Measurement of the permittivity at 23℃ of filling compounds
  • KS C 2134-1996(2021) Testing method for dissipation factor and permittivity parallel with laminations of laminated sheet and plate materials

Association Francaise de Normalisation, low temperature dielectric constant

  • NF EN 62562:2011 Méthode de la cavité résonante pour mesurer la permittivité complexe des plaques diélectriques à faibles pertes
  • NF C26-232*NF EN 62810:2018 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • NF EN 62810:2018 Mesure de la permitivité complexe des barreaux diélectriques à faibles pertes par la méthode de la cavité cylindrique
  • NF C26-296*NF EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates.
  • NF EN IEC 63185:2021 Méthode au résonateur à disque circulaire de type symétrique pour mesurer la permittivité complexe des substrats diélectriques à faible perte
  • NF EN 60247:2004 Liquides isolants - Mesure de la permittivité relative, du facteur de dissipation diélectrique (tan delta) et de la résistivité en courant continu
  • UTE C27-251:1987 Diélectriques liquides - Appréciation conventionnelle de la corrosivité des fumées par mesure de pH et de résistivité - Méthode d'essai
  • NF EN IEC 62631-2-2:2022 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 2-2 : Permittivité relative et facteur de dissipation - Hautes fréquences (1 MHz à 300 MHz) - Méthodes en courant alternatif
  • NF C26-631-2-1*NF EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1 : relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods
  • NF EN IEC 62631-2-1:2018 Propriétés diélectriques et résistives des matériaux isolants solides Partie 2-1 : permittivité relative et facteur de dissipation - Fréquences techniques (0,1 Hz à 10 MHz) - Méthodes en courant alternatif
  • NF EN 61338-1-3:2000 Résonateurs diélectriques à modes guidés - Partie 1-3 : informations générales et conditions d'essais - Méthode de mesure de la permittivité relative complexe des matériaux diélectriques pour les résonateurs diélectriques fonctionnant aux ...
  • NF EN 60811-301:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 301 : essais électriques - Mesure de la permittivité à 23 oC des matières de remplissage
  • NF C32-033/A1:2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1 : methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive componen

European Committee for Electrotechnical Standardization(CENELEC), low temperature dielectric constant

  • EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0@1 Hz to 10 MHz) - AC Methods
  • EN 61338-1-3:2000 Waveguide Type Dielectric Resonators - Part 1-3: General Information and Test Conditions - Measurement Method of Complex Relative Permittivity for Dielectric Resonator Materials at Microwave Frequency test conditions - Measurement Method of Complex Relati
  • EN 61338-1-4:2006 Waveguide type dielectric resonators Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency (Incorporating corrigendum November 2006)

ES-UNE, low temperature dielectric constant

  • UNE-EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (Endorsed by AENOR in July of 2015.)
  • UNE-EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (Endorsed by AENOR in June of 2011.)
  • UNE-EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • UNE-EN 60247:2004 ERRATUM:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
  • UNE-EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods (Endorsed by Asociación Española de Normalización in July of 2022.)
  • UNE-EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods (Endorsed by Asociación Española de Normalización in June of 2018.)
  • UNE-EN 61338-1-3:2000 Waveguide type dielectric resonators -- Part 1-3: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency (Endorsed by AENOR in August of 2000.)
  • UNE-EN 61338-1-4:2006 Waveguide type dielectric resonators -- Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency (Endorsed by AENOR in April of 2006.)

German Institute for Standardization, low temperature dielectric constant

  • DIN EN 62810:2015-12 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (IEC 62810:2015); German version EN 62810:2015
  • DIN EN 62562:2011-10 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 62562:2010); German version EN 62562:2011
  • DIN EN IEC 63185:2022-10 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method (IEC 63185:2020); German version EN IEC 63185:2021
  • DIN EN 63185:2018 Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates (IEC 46F/415/CD:2018); Text in German and English
  • DIN EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 62562:2010); German version EN 62562:2011
  • DIN EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (IEC 62810:2015); German version EN 62810:2015
  • DIN EN 61338-1-3:2000 Waveguide type dielectric resonators - Part 1-3: General information and test conditions; Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency (IEC 61338-1-3:1999); German version EN 61338-1-3:2000
  • DIN EN 61338-1-4 Berichtigung 1:2007 Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency (IEC 61338-1-4:2005); German version EN 61338-1-
  • DIN 51111:2023-04 Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (<epsilon><(Index)r>) and the dielectric dissipation factor (tan <delta>) /...
  • DIN EN IEC 62631-2-1:2018-12 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods (IEC 62631-2-1:2018); German version EN IEC 62631-2-1:2018
  • DIN EN 61338-1-4:2006 Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency (IEC 61338-1-4:2005); German version EN 61338-1-
  • DIN EN 61338-1-4:2006-06 Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency (IEC 61338-1-4:2005); German version EN 61338...
  • DIN EN 61338-1-4 Berichtigung 1:2007-02 Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency (IEC 61338-1-4:2005); German version EN 61338...

American Society for Testing and Materials (ASTM), low temperature dielectric constant

  • ASTM D1082-17 Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
  • ASTM D2520-21 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650 °C
  • ASTM D2149-13 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C
  • ASTM D2149-97(2004) Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500&176C
  • ASTM D2149-97 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500176C
  • ASTM D150-18 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D150-87 Standard Test Methods for A-C Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials
  • ASTM D2149-13(2021) Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 °C
  • ASTM D3380-22 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
  • ASTM A671/A671M-13 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  • ASTM A671/A671M-13e1 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  • ASTM A671/A671M-14 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  • ASTM D3380-90(1995)e1 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
  • ASTM A671-06 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  • ASTM A671-04 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  • ASTM A671-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  • ASTM A671-96 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  • ASTM A671/A671M-10 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  • ASTM D1082-00(2011) Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
  • ASTM D1082-00 Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
  • ASTM D1082-00(2005) Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
  • ASTM D4491/D4491M-20e1 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D4491/D4491M-20 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D4491/D4491M-21 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D4491/D4491M-17 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D3380-14 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
  • ASTM D5493-06(2011) Standard Test Method for Permittivity of Geotextiles Under Load
  • ASTM D5493-93(2003) Standard Test Method for Permittivity of Geotextiles Under Load
  • ASTM D150-98(2004) Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D150-98 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D924-99e1 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-99e2 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-08 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-15 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D5493-06 Standard Test Method for Permittivity of Geotextiles Under Load
  • ASTM D1531-01 Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
  • ASTM D1531-01e1 Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
  • ASTM D1531-95 Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
  • ASTM D7416-09(2020) Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Coun
  • ASTM D3380-90(2003) Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
  • ASTM D8153-22 Standard Test Method for Determination of Soil Water Contents Using a Dielectric Permittivity Probe
  • ASTM D5493-06(2016) Standard Test Method for Permittivity of Geotextiles Under Load
  • ASTM D924-04 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-03 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D924-03a Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • ASTM D4491/D4491M-22 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D4491/D4491M-16 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D1531-06 Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
  • ASTM D7416-08 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Coun
  • ASTM D1673-94(1998) Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
  • ASTM D1673-94(2004) Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
  • ASTM D4491-99a Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D4491-99a(2004)e1 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D4491-99a(2004) Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM B114-90(2001) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
  • ASTM B114-90(1995)e1 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
  • ASTM A893/A893M-03 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
  • ASTM A893/A893M-03(2022) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
  • ASTM B84-07 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
  • ASTM B84-07(2013) Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
  • ASTM D7416-09 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome
  • ASTM D150-11 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D669-92(2002) Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
  • ASTM B84-90(2001) Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
  • ASTM B84-90(1995)e1 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
  • ASTM B84-07(2019) Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
  • ASTM A893-97 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
  • ASTM A893/A893M-03(2008) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
  • ASTM A893/A893M-03(2015) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
  • ASTM D2520-13 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC
  • ASTM D4491-99a(2009) Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D4491-99a(2014)e1 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D4491/D4491M-15 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D2520-95 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC
  • ASTM D2520-01 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC
  • ASTM D7416-09(2015) Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Vis
  • ASTM D5568-01 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
  • ASTM D5568-95 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
  • ASTM D5568-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
  • ASTM D5568-08 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
  • ASTM B114-07(2018) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
  • ASTM D669-03 Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
  • ASTM D3380-10 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
  • ASTM D669-92(1997) Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
  • ASTM B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
  • ASTM B114-07(2013) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors

Danish Standards Foundation, low temperature dielectric constant

  • DS/EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • DS/EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • DS/EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity
  • DS/IEC 247:1979 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
  • DS/ETSI EN 319 412-1 V1.4.4:2021 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures
  • DS/EN 61338-1-3:2000 Waveguide type dielectric resonators - Part 1-3: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • DS/EN 61338-1-4:2006 Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency

IPC - Association Connecting Electronics Industries, low temperature dielectric constant

  • IPC TM-650 2.5.5.2A-1987 Dielectric Constant and Dissipation Factor of Printed Wiring Board Material - Clip Method
  • IPC TM-650 2.5.5.3C-1987 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method)
  • IPC TM-650 2.5.5.5C-1998 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
  • IPC TM-650 2.5.5.5B-1995 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
  • IPC TM-650 2.5.5A-1975 Dielectric Constant of Printed Wiring Materials
  • IPC TM-650 2.5.5.1B-1986 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Insulating Material at 1 MHz (Contacting Electrode Systems)

British Standards Institution (BSI), low temperature dielectric constant

  • BS EN 62562:2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • BS EN 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • BS EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • 18/30373795 DC BS EN 63185. Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates
  • BS IEC 61196-1-125:2022 Coaxial communication cable - Electrical test methods. Test for equivalent permittivity and equivalent dissipation factor of dielectric
  • BS EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Relative permittivity and dissipation factor. High frequencies (1 MHz to 300 MHz). AC methods
  • BS 7663:1993 Methods of test for determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form
  • BS EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials. Relative permittivity and dissipation factor. Technical frequencies (0,1 Hz to 10 MHz). AC Methods
  • 20/30425177 DC BS IEC 62631-2-2. Dielectric and resistive properties of solid insulating materials. Part 2-2. Relative permittivity and dielectric dissipation factor. High frequencies (1 MHz to 300 MHz). AC Methods
  • BS PD IEC TR 63307:2020 Measurement methods of the complex relative permeability and permittivity of noise suppression sheet
  • PD IEC TR 63307:2020 Measurement methods of the complex relative permeability and permittivity of noise suppression sheet
  • BS 4618 Sec.2.1:1970 Recommendations for the presentation of plastics design data. Electrical properties. Permittivity
  • BS 4542:1970 Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method)
  • 21/30435996 DC BS IEC 61196-1-125. Coaxial communication cable. Part 1-125. Electrical test methods. Test for equivalent permittivity and equivalent dissipation loss of dielectric
  • BS EN 61338-1-3:2000 Waveguide type dielectric resonators.. General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • BS EN 61338-1-4:2006 Waveguide type dielectric resonators — Part 1-4: General information and test conditions — Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency
  • BS EN 60811-301:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Electrical tests. Measurement of the permittivity at 23 °C of filling compounds
  • BS 903 Pt.C3:1982 Methods of testing vulcanized rubber. Determination of loss tangent and permittivity at power and audio frequencies

International Electrotechnical Commission (IEC), low temperature dielectric constant

  • IEC PAS 62562:2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • IEC 62810:2015 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods
  • IEC 63185:2020 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
  • IEC 61196-1-125:2022

    Coaxial communication cable - Part 1-125: Electrical test methods - Test for equivalent permittivity and equivalent dissipation factor of dielectric

  • IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods
  • IEC TR 63307:2020 Measurement methods of the complex relative permeability and permittivity of noise suppression sheet
  • IEC 61338-1-3:1999 Waveguide type dielectric resonators - Part 1-3: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC methods
  • IEC 61338-1-4:2005 Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency
  • IEC 60811-301:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 C of filling compounds

Institute of Interconnecting and Packaging Electronic Circuits (IPC), low temperature dielectric constant

  • IPC TM-650 2.5.5.8-1995 Low Frequency Dielectric Constant and Loss Tangent, Polymer Films
  • IPC TM-650.2.5.7.2-2009 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method); Revision C - December 1987
  • IPC TM-650 2.5.5.3-1987 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method); Revision C - December 1987
  • IPC TM-650-2015 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method); Revision C - December 1987
  • IPC TM-650 2.5.5.5-1998 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band Revision C
  • IPC TM-650 2.5.5.1-1986 Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Insulating Material at 1 MHz (Contacting Electrode Systems); Revision B - May 1986
  • IPC TM-650 2.5.5.2-1987 Dielectric Constant and Dissipation Factor of Printed Wiring Board Material - Clip Method
  • IPC TM-650 2.5.5.4-1985 Dielectric Constant and Dissipation Factor of Printed Wiring Board Material-Micrometer Method
  • IPC TM-650 2.5.5-1975 Dielectric Constant of Printed Wiring Materials; Revision A - July 1975
  • IPC TM-650 2.5.5.9-1998 Permittivity and Loss Tangent, Parallel Plate, 1 MHz to 1.5 GHz
  • IPC TM-650 2.5.5.5.1-1998 Stripline Test for Complex Relative Permittivity of Circuit Board Materials to 14 GHz
  • IPC TM-650 2.5.5.13-2007 Relative Permittivity and Loss Tangent Using a Split-Cylinder Resonator
  • IPC TM-650 2.5.5.10-2005 High Frequency Testing to Determine Permittivity and Loss Tangent of Embedded Passive Materials

IEC - International Electrotechnical Commission, low temperature dielectric constant

  • PAS 62562-2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (Edition 1.0)

Lithuanian Standards Office , low temperature dielectric constant

  • LST EN 62562-2011 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 62562:2010)
  • LST EN IEC 63185:2021 Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method (IEC 63185:2020)
  • LST EN 60247-2004 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004)
  • LST ETSI EN 319 412-1 V1.4.4-2021 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures

未注明发布机构, low temperature dielectric constant

  • DIN EN IEC 63185:2022 Measurement of the complex dielectric constant for low-loss dielectric substrates using the symmetrical circular disk resonator method
  • BS 7663:1993(2000) Methods of test for Determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form
  • BS EN 61338-1-4:2006(2007) Waveguide type dielectric resonators — Part 1 - 4 : General information and test conditions — Measurement method of complex relative permittivity for dielectric resonator materials at millimetre - wave frequency

Group Standards of the People's Republic of China, low temperature dielectric constant

  • T/CSTM 00985-2023 Test method for the complex permittivity of low-loss dielectric plates-Split-cylinder resonator method
  • T/CSTM 00986-2023 Test method for the complex permittivity of high-frequency dielectric substrates -Balanced-type circular disk resonator method
  • T/CSTM 00990-2023 Test method for dielectric constant and dielectric loss tangent in millimeter wave frequency range — Quasi-optical cavity method
  • T/CNEA 101.31-2021 PWR pressure boundary components—Material— Part 31:Electric-fusion welded pipe for atmospheric and lower temperatures

American National Standards Institute (ANSI), low temperature dielectric constant

  • ANSI/ASTM D150:2018 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ANSI/ASTM D2520:2013 New Standard Test Methods for Complex Permittivity Dielectric Constant of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures of 1650 C
  • ANSI/ASTM D150:2011 Test Methods for AC Loss Characteristics and Permittivity Dielectric Constant of Solid Electrical Insulation
  • ANSI/ASTM B84:2001 Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
  • ANSI/ASTM D3380:2010 Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Plastic-based Microwave Circuit Substrates
  • ANSI/ASTM A893:1997 Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
  • ANSI/ASTM B114:2001 Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors

Professional Standard - Petroleum, low temperature dielectric constant

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, low temperature dielectric constant

  • GB/T 5597-1999 Test method for complex permittivity of solid dielectric materials at microwave frequencies
  • GB/T 11297.11-2015 Test method for dielectric constant of pyroelectric materials
  • GB/T 11297.11-1989 Test method for the dielectric constant of pyroelectric materials
  • GB 7265.1-87 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
  • GB/T 7265.1-1987 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
  • GB 7265.1-1987 Test Method for Microwave Complex Permittivity of Solid Dielectric Perturbation Method
  • GB/T 12636-1990 Stripline test method for complex permittivity of microwave dielectric substrates
  • GB/T 7265.2-1987 Test method for the complex permittivity of solid dielectric materials at microwave frequencies--
  • GB 7265.2-1987 Test method of microwave complex permittivity of solid dielectric "open cavity" method
  • GB/T 11310-1989 Test methods for the properties of piezoelectric ceramics--Test methods for temperature characteristics of relative free dielectric constants
  • GB 11310-1989 Piezoelectric Ceramic Material Performance Test Method Relative Free Permittivity Temperature Characteristics Test
  • GB/T 18339-2001 Test method for motor gasoline octane number (dielectric constant method)
  • GB/T 1693-2007 Rubber, vulcanized Determination of dielectric constant and dielectric loss tangent
  • GB/T 5654-1985 Measurement of relative permittivity,dielectric dissipation factor at power frequency and volume resistivity of insulating liquids
  • GB/T 1693-1981 Vulcanized rubber--Determination of dielectric constant and dielectric loss angular tangent value
  • GB/T 1694-1981 Vulcanized rubber--Test method for HF dielectric constant and dielectric loss angular tangent value
  • GB/T 1409-1988 Methods for the determination of the permittivity and dielectric dissipation factor of solid electrical insulating materials at power,audio and radio frequencies including metre wavelengths
  • GB/T 2951.10-1997 Common test methods for insulating and sheathing materials of electric cables. Part 5: Methods specific to filling compounds. Section one: Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive components--
  • GB/T 2951.51-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part51:Methods specific to filling compounds.Drop point.Separation of oil.Lower temperature brittleness.Total acid number.Absence of corrosive components.Permittivit
  • GB/T 5594.4-2015 Test methods for properties of structure ceramic used in electronic component and device.Part 4:Test method for permittivity and dielectric loss angle tangent value
  • GB/T 5170.10-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Combined high and low temperature/low air pressure testing equipment

PL-PKN, low temperature dielectric constant

  • PN-EN IEC 63185-2021-08 E Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method (IEC 63185:2020)
  • PN E04403-1986 Solide electric insulating materials Measurements of the permittivity and dielectric dissipation factor
  • PN E04410-22-1986 Electroinsulating varnishes Test methods Testing of dissipation factor and permittivity

RO-ASRO, low temperature dielectric constant

  • STAS 2740-1969
  • STAS 12969-1991 Solid electroinsulating materials. Method for permitivity and lossangle tangent detemination at temperature of 77 K

Professional Standard - Electron, low temperature dielectric constant

  • SJ/T 10143-1991 Detail specification for electronic components--Semiconductor integrated circuits--CT54LS112/CT74LS112 dual J-K negative-edge flip-flop
  • SJ/T 11043-1996 Test method for high frequency dielectric losses and permittivity of electronic glass
  • SJ/T 10142-1991 Detail specification for electronic components--Semiconductor integrated circuits--CT54LS00/CT74LS00 Quad 2-input positive-NAND gate
  • SJ/T 1147-1993 Test method for dielectric loss angle tangent and dielectric canstant of organic film for use in capacitors
  • SJ 20512-1995 Test methods for permittivity and permeability of microwave high loss solid materials
  • SJ/T 11457.1.3-2021 Waveguide type dielectric resonators Part1-3:General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • SJ/T 11457.1.4-2021 Waveguide type dielectric resonators Part1-4:General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimeter-wave frequency

Institute of Electrical and Electronics Engineers (IEEE), low temperature dielectric constant

  • IEEE Std 178-1958*ANSI C83.23-1960 IEEE Standards on Piezoelectric Crystals:Determination of The Elastic. Piezoelectric and Dielectric Constants- The Electro mechanical Coupling Factor, 1958

RU-GOST R, low temperature dielectric constant

  • GOST 22372-1977 Dielectric materials. Methods of determination of permittivity and powerfactor with in a frequency range of 100 to 5·10 in 6 degree Hz
  • GOST R IEC 62562-2012 State system for ensuring the uniformity of measurements. Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
  • GOST 6433.4-1971 Solid electrical insulating materials. Methods for evaluation of dielectric power factor and permittivity at power (50 Hz) frequency
  • GOST 8.358-1979 State system for ensuring the uniformity of measurements. Method of making measurements of relative permittivity and dielectric loss tangent in the fregnency range of 0,2 to 1 GHz
  • GOST R 8.623-2015 State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedure of measurements at microwave frequencies
  • GOST 8.544-1986 State system for ensuring the uniformity of measurements. Relative dielectric permittivity the loss tangent of solid dielectrics. Procedure of measure from 10 in 9 degree to 10 in 10 degree Hz

Japanese Industrial Standards Committee (JISC), low temperature dielectric constant

  • JIS C 2138:2007 Electrical insulating materials -- Methods for the determination of the relative permittivity and dielectric dissipation factor

AENOR, low temperature dielectric constant

  • UNE-EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
  • UNE 21322:1977 METHODS FOR THE DETERMINATION OF THE PERMITIVITY AND DIELECTRIC DISSIPATION FACTOR OF ELECTRICAL INSULATING MATERIALS AT POWER, AUDIO AND RADIO FREQUENCIES.

CZ-CSN, low temperature dielectric constant

  • CSN 72 5041-1973 Testing oí fired ceramic materials. Determination of the permitivity and dielectric dissipation factor
  • CSN ETS 300 175-3-1994 Radio Equipment and Systems (RES). Digital European Cordless Telecommunications (DECT). Common interface. Part 3: Medium access control layer

Defense Logistics Agency, low temperature dielectric constant

  • DLA MIL-PRF-81 E-2005 CAPACITORS, VARIABLE, CERAMIC DIELECTRIC, GENERAL SPECIFICATION FOR
  • DLA MIL-PRF-20 K SUPP 1-2003 CAPACITOR, FIXED, CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
  • DLA MIL-PRF-20 K-2003 CAPACITOR, FIXED, CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

Indonesia Standards, low temperature dielectric constant

  • SNI 04-6542-2001 Measuremert of relative permitivity, dielectric dissipation factor and d.c. resistivity of insulating liquid

IN-BIS, low temperature dielectric constant

KR-KS, low temperature dielectric constant

  • KS C 2150-2008(2023) Measuring method of dielectric constant and dielectric loss of dielectric thin film at the high frequency ranges(500 MHz∼10 GHz)
  • KS C IEC 62631-2-1-2020 Dielectric and resistive properties of solid insulating materials —Part 2-1: Relative permittivity and dissipation factor —Technical frequencies(0.1 Hz ~ 10 MHz) — AC methods
  • KS C IEC 60811-5-1-2021 Insulating and sheathing materials of electric and optical cables —Common test methods — Part 5-1: Methods specific to filling compounds — Drop-point — Separation of oil — Lower temperature brittlenes
  • KS C IEC 61338-1-3-2018 Waveguide type dielectric resonators ― Part 1-3: General information and test conditions ― Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • KS C IEC 61338-1-4-2018 Waveguide type dielectric resonators ─ Part 1-4: General information and test conditions ─ Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave fre
  • KS C IEC 61338-1-4-2018(2023) Waveguide type dielectric resonators ─ Part 1-4: General information and test conditions ─ Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave fre
  • KS C IEC 61338-1-3-2018(2023) Waveguide type dielectric resonators ― Part 1-3: General information and test conditions ― Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • KS C IEC 60811-301-2016 Electric and optical fibre cables — Test methods for non-metallic materials — Part 301: Electrical tests — Measurement of the permittivity at 23℃ of filling compounds

国家市场监督管理总局、中国国家标准化管理委员会, low temperature dielectric constant

  • GB/T 31838.6-2021 Solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor (frequencies 0.1Hz~10MHz)
  • GB/T 41483-2022 General technical requirements for hazardous liquid chemicals security detectors based on dielectric constant

Professional Standard - Military and Civilian Products, low temperature dielectric constant

  • WJ 2642-2004 Standard material specification for dielectric constant of solid propellants and explosives

Hebei Provincial Standard of the People's Republic of China, low temperature dielectric constant

  • DB13/T 308-1997 Determination of Octane Number of Motor Gasoline by Dielectric Constant Method

AR-IRAM, low temperature dielectric constant

ES-AENOR, low temperature dielectric constant

Military Standard of the People's Republic of China-General Armament Department, low temperature dielectric constant

  • GJB 8680-2015 Calibration procedures for dielectric constant tester for solid explosives

IT-UNI, low temperature dielectric constant

Standard Association of Australia (SAA), low temperature dielectric constant

Taiwan Provincial Standard of the People's Republic of China, low temperature dielectric constant

  • CNS 8787-1988 Method for Determining Dielectric Constant and Dielectric Dissipation Factor of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 4860-1998 Fixed capacitors of ceramic dielectric for use in electronic equipment (class 2)
  • CNS 7634-1981 Method of Test for Complex Dielectric Constant of Noumetallic Magnetic Materials at Microwave Fequencies
  • CNS 7396-1981 Method of Test for Dielectric Constant and Dissipation Factor of Polyethylene by Liquid Displacement Procedure

HU-MSZT, low temperature dielectric constant

National Metrological Technical Specifications of the People's Republic of China, low temperature dielectric constant

  • JJF 1170-2007 Calibration Specification for Cryogenic Resistance Thermometers with Negative Sensitivity

BE-NBN, low temperature dielectric constant

  • NBN T 31-004-1976 Vulcanized rubbers - Determination of compression set under constant deflection at low temperatures

United States Navy, low temperature dielectric constant

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, low temperature dielectric constant

  • JEDEC JESD5-1982 Mesurement of Temperature Coefficient of Voltage Regulator Diodes

AT-OVE/ON, low temperature dielectric constant

  • OVE EN IEC 62631-2-2:2021 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dielectric dissipation factor - High frequencies (1 MHz to 300 MHz) - AC Methods (IEC 112/531/CDV) (english version)

Professional Standard - Aerospace, low temperature dielectric constant

  • QJ 2220.4-1994 Test method for coating electrical insulation performance Test method for relative dielectric constant at power frequency, audio frequency and high frequency

GOSTR, low temperature dielectric constant

  • GOST 8.015-1972 State system for ensuring the uniformity of measurements. Method of measurements of relative dielectric permittivity and tangent of dielectric dissipation angle of solid dielectrics made of thin leafed materials in the frequency band from 9 to 10 GHz

European Telecommunications Standards Institute (ETSI), low temperature dielectric constant

  • ETSI TS 119 412-1-2015 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures (V1.0.1)
  • ETSI EN 319 412-1-2021 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures (V1.4.4)

ETSI - European Telecommunications Standards Institute, low temperature dielectric constant

  • TS 119 412-1-2015 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures (V1.0.1)
  • ETSI EN 319 412-1:2015 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures (V1.1.0)
  • TS 119 412-1-2018 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures (V1.2.1)
  • ETSI EN 319 412-1:2016 Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures (V1.1.1)

CENELEC - European Committee for Electrotechnical Standardization, low temperature dielectric constant

  • EN 60811-1-4:1995 Insulating and Sheathing Materials of Electric Cables - Common Test Methods - Part 1-4: General Application - Tests at Low Temperature




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved