ZH
RU
ES

How to test and analyze polymers

How to test and analyze polymers, Total:360 items.

In the international standard classification, How to test and analyze polymers involves: Plastics, Mechanical testing, Protection of and in buildings, Textile fibres, PAINT AND COLOUR INDUSTRIES, Soil quality. Pedology, Agricultural machines, implements and equipment, Reinforced plastics, Hydraulic fluids, Organic chemicals, Analytical chemistry, Road engineering, Construction materials, Insulating fluids, Rubber, Raw materials for rubber and plastics, Non-ferrous metals, Aids for disabled or handicapped persons, Structures of buildings, Adhesives, Microbiology, Veterinary medicine, Farming and forestry, Inorganic chemicals, Products of the chemical industry, Rubber and plastics products, Materials for aerospace construction, Bearings, Electrical wires and cables, Materials and articles in contact with foodstuffs, Surface treatment and coating, General methods of tests and analysis for food products, Insulating materials, Paints and varnishes, Electrical engineering in general, Fuel cells, Water quality, Solar energy engineering, Materials for the reinforcement of composites, Environmental protection, Powder metallurgy.

American National Standards Institute （ANSI), How to test and analyze polymers

ANSI/ASTM D3418:1999 Test Method for Transition Temperatures of Polymers by Thermal Analysis
ANSI/ASTM D3417:1999 Test Method for Heats of Fusion and Crystallization of Polymers by Thermal Analysis

American Society for Testing and Materials (ASTM), How to test and analyze polymers

ASTM D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-82(1988)e1 Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis
ASTM D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D7646-23 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D7028-07 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D7028-07e1 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM UOP1015-17 Determination of Trace Oxygenates in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry
ASTM D7028-07(2015) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D6482-06 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering
ASTM D6482-99 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-01 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2016) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6827-02 Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
ASTM D6827-02(2008) Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
ASTM D6827-02(2016) Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
ASTM D6827-02(2023) Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
ASTM UOP1023-18 Determination of Trace Arsine and Phosphine in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry
ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM D4443-12 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
ASTM UOP1021-17 Determination of Trace Methyl and Ethyl Mercaptan in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry
ASTM D7675-11 Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer
ASTM D4443-07 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
ASTM D4443-13 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
ASTM F2778-09 Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM D3410/D3410M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM F2778-09(2015) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM F2778-09(2020) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM F1632-02 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM F1632-03(2018) Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM D6212-99 Standard Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Rateometric Colorimetry
ASTM B761-02e1 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM E3290-21 Standard Test Method for Establishing Performance of Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds

CZ-CSN, How to test and analyze polymers

CSN 64 9008-1986 Aqueous dispersions of homopolyntors nd copolymers. Detormination of oagulum and rough admixtures- ontent by sievo analysis
CSN 64 9005-1985 Aqueous dispursions of polymers ind copolymers ensile test
CSN 64 0751-1981 Testing of plastics. Determination of hermal stability of póly (vinylchloride) nd of its mixtures by the continuous otentiometric method
CSN 64 9001-1984 Aqueous disperslons of polymers and opolymers. reparation of test coatings and free ilms

PL-PKN, How to test and analyze polymers

PN C89421-1991 Aqueous dispersions of polymers and copolymers. Determination of gross particle content by sieve analysis
PN-EN IEC 62788-6-2-2020-12 E Measurement procedures for materials used in photovoltaic modules - Part 6-2: General tests - Moisture permeation testing with polymeric materials (IEC 62788-6-2:2020)

RU-GOST R, How to test and analyze polymers

GOST R 57754-2017 Polymer composites. Test method for determination of linear thermal expansion by thermomechanical analysis
GOST 29127-1991 Plastics. Thermogravimetry of polymers. Temperature scanning method
GOST R 56722-2015 Plastics. Thermogravimetry of polymers. Part 2. Determination of activation energy
GOST R 57697-2017 Polymer composites. Method for determination of curing properties of pultrusion resins by thermal analysis
GOST R 57739-2017 Polymer composites. Method for determination of glass transition temperature by dynamic mechanical analysis
GOST 21979-1976 Reagents. Zinc compounds. Polarographic method for the determination of copper, lead and cadmium as impurities
GOST R 57206-2016 Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
GOST IEC 60811-605-2016 Electric and optical fibre cables. Test methods for non-metallic materials. Part 605. Physical tests. Measurement of carbon black and/or mineral filler in polyethylene compounds
GOST R ISO 17190-10-2015 Urine-absorbing aids for incontinence. Test methods for characterizing polymer-based absorbent materials. Part 10. Determination of extractable polymer content by potentiometric titration
GOST R ISO 1833-3-2008 Textiles. Quantitative chemical analysis. Part 3. Mixtures of acetate and certain other fibres (method using acetone)
GOST IEC/TS 62282-7-1-2016 Fuel cell technologies. Part 7-1. Single cell test methods for polymer electrolyte fuel cell
GOST IEC 60811-407-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 407. Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds
GOST 30351-2001 Polyamides, polyamide fibres, fabrics, films. Determination of mass fraction of residual caprolactam and low-molecular compounds and their concentration of migration in water. Methods of liquid and gas-liquid chromatography
GOST 33402-2015 Testing of chemicals of environmental hazard. Determination of the low molecular weight content of a polymer using gel permeation chromatography
GOST 33418-2015 Testing of chemicals of environmental hazard. Determination of the Number-Average Molecular Weight and the Molecular Weight Distribution of Polymers using Gel Permeation Chromatography

European Committee for Standardization (CEN), How to test and analyze polymers

prEN 17888-2 Thermal performance of buildings - In situ testing of building test structures - Part 2: Steady-state data analysis for aggregate heat loss test
prEN 17887-2 Thermal performance of buildings - In situ testing of completed buildings - Part 2: Steady-state data analysis for aggregate heat loss test
EN 1744-7:2012 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
EN ISO 182-3:2000 Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 3: Conductometric Method
EN ISO 182-2:1999 Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and any Other Acidic Products at Elevated Temperatures - Part 2: pH Method
EN ISO 182-4:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993)
EN 12697-11:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen
EN 12697-11:2003 Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and bitumen
EN 12192-2:1999 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents
PD CEN/TS 16707:2014 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Polymerase chain reaction (PCR) based screening strategies
CEN/TS 16707:2014 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Polymerase chain reaction (PCR) based screening strategies
EN ISO 24025-2:2020 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020)
EN ISO 12086-2:1999 Plastics - Fluoropolymer Dispersions and Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 12086-2: 1995
EN ISO 20568-2:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

German Institute for Standardization, How to test and analyze polymers

DIN EN 17888-2:2022 Thermal performance of buildings - In situ testing of building test structures - Part 2: Steady-state data analysis for aggregate heat loss test; German and English version prEN 17888-2:2022
DIN EN 17887-2:2022 Thermal performance of buildings - In situ testing of completed buildings - Part 2: Steady-state data analysis for aggregate heat loss test; German and English version prEN 17887-2:2022
DIN EN 17887-2:2022-10 Thermal performance of buildings - In situ testing of completed buildings - Part 2: Steady-state data analysis for aggregate heat loss test; German and English version prEN 17887-2:2022 / Note: Date of issue 2022-09-02
DIN 19683-16:2009 Soil quality - Physical laboratory tests - Part 16: Determination of aggregate stability using the method of wet sieving
DIN 19683-16:2015 Soil quality - Physical laboratory tests - Part 16: Determination of aggregate stability using the method of wet sieving
DIN 54221:1975-08 Testing of textiles; quantitative analysis of binary mixtures, polyamide 6 6 or polyamide 6 fibres with other fibres, hydrochloric acid method
DIN EN 12274-4:2018 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
DIN EN 12192-2:1999-07 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents; German version EN 12192-2:1999
DIN EN ISO 182-2:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990); German version
DIN 51350-6:1996-08 Testing of lubricants - Testing in the Shell four-ball tester - Part 6: Determination of shear stability of lubricating oils containing polymers
DIN CEN/TS 14577:2004-03 Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons; German version CEN/TS 14577:2003
DIN EN 17887-1:2022-10 Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data collection for aggregate heat loss test; German and English version prEN 17887-1:2022 / Note: Date of issue 2022-09-02
DIN EN ISO 182-3:2001 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993); Ger
DIN EN ISO 182-4:2001 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993); Ger
DIN 19683-16:1998 Methods of soil investigations for agricultural engineering - Physical laboratory tests - Part 16: Determination of aggregate stability using the method of wet sieving
DIN 16780-2:1990 Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties
DIN EN ISO 24025-2:2020-08 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020); German version EN ISO 24025-2:2020
DIN ISO 7148-2:2014-07 Plain bearings - Testing of the tribological behaviour of bearing materials - Part 2: Testing of polymer-based plain bearing materials (ISO 7148-2:2012)
DIN 54205:1975 Testing of textiles; quantitative analysis of binary mixtures, natural or regenerated cellulose fibres with polyester fibres, sulphuric acid method
DIN EN ISO 12086-2:2006 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006); English version of DIN EN ISO 12086-2:2006-05
DIN CEN/TS 16707:2014-12*DIN SPEC 10707:2014-12 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Polymerase chain reaction (PCR) based screening strategies; German version CEN/TS 16707:2014
DIN 54204:1975-08 Testing of textiles; quantitative analysis of binary mixtures, wool with other fibres, potassium hydroxide solution method
DIN EN ISO 10707:1998 Water quality - Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds - Method by analysis of biochemical oxygen demand (closed bottle test) (ISO 10707:1994); German version EN ISO 10707:1997
DIN EN ISO 20568-2:2017-10 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017); German version EN ISO 20568-2:2017
DIN EN ISO 14530-2:2000 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
DIN EN ISO/ASTM 52936-1:2023-04 Additive manufacturing of polymers - Qualification principles - Part 1: General principles and preparation of test specimens for PBF-LB (ISO/ASTM 52936-1:2023); German version EN ISO/ASTM 52936-1:2023
DIN 51405:2004-01 Testing of mineral oil hydrocarbons, similar liquids and solvents for paints and varnishes - Analysis by gas chromatography - General working principles
DIN 54802-1:2015-07 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1: Planetary mixer method

Japanese Industrial Standards Committee (JISC), How to test and analyze polymers

JIS L 1030-2:1998 Testing methods for quantitative analysis of fibre mixtures of textiles -- Part 2: Testing methods for quantitative analysis of fibre mixtures
JIS L 1030-3-1:2023 Testing methods for quantitative analysis of fibre mixtures of textiles -- Part 3-1: Instrumental analysis of some animal hair fibres -- Using MALDI-TOF MS testing methods for quantitative analysis of fibre mixtures
JIS L 1030-1:2006 Testing methods for quantitative analysis of fibre mixtures -- Part 1: Testing methods for fibre identification
JIS L 1030-1:2012 Testing methods for quantitative analysis of fibre mixtures -- Part 1: Testing methods for fibre identification
JIS L 1030-1:1998 Testing methods for quantitative analysis of fiber mixtures -- Part 1: Testing methods for fiber identification
JIS K 7315-2:2006 Plastics -- Polyphenylene Sulfide (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7315-2:2012 Plastics -- Polyphenylene Sulfide (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 5601-4-2:2008 Testing methods for paint components -- Part 4 : Analysis for components emitted from film -- Section 2 : Volatile organic compounds
JIS C 3660-4-1:2011 Insulating and sheathing materials of electric and optical cables -- Common test methods -- Part 4-1: Methods specific to polyethylene and polypropylene compounds -- Resistance to environmental stress cracking -- Measurement of the melt flow index -- Car
JIS K 6226-1:2003 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers

Korean Agency for Technology and Standards (KATS), How to test and analyze polymers

KS M ISO 11358-2-2017(2022) Plastics - Thermogravimetry(TG) of polymers - Part2: Determination of activation energy
KS M ISO 11358-2:2017 Plastics - Thermogravimetry(TG) of polymers - Part2: Determination of activation energy
KS M ISO 11358-3-2017(2022) Plastics - Thermogravimetry(TG) of polymers - Part3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
KS M ISO 2898-2:2012 Plastics-Plasticized poly(vinyl chloride)(PVC-P) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS P ISO 17190-8-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 8：Gravimetric determination of flowrate
KS C IEC 60811-605:2018 Electric and optical fibre cables — Test methods for non-metallic materials — Part 605: Physical tests — Measurement of carbon black and/or mineral filler in polyethylene compounds
KS P ISO 17190-10-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 10：Determination of extractable polymer content by potentiometric titration
KS C IEC 60811-406:2018 Electric and optical fibre cables — Test methods for non-metallic materials — Part 406: Miscellaneous tests — Resistance to stress cracking of polyethylene and polypropylene compounds
KS M ISO 14530-2-2006(2016) Plastics－Unsaturated－polyester powder moulding compounds(UP－PMCs)－Part 2：Preparation of test specimens and determination of properties
KS C IEC 60811-407-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
KS M ISO 12086-2-2016(2021) Plastics－Fluoropolymer dispersions and moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 14528-2-2008(2018) Plastics－Melamine-formaldehyde powder moulding compounds(MF-PMCs)－Part 2：Preparation of test specimens and determination of properties
KS C IEC 60811-407:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
KS P ISO 17190-10:2011 Urine-absorbing aids for incontinence-Test methods for characterizing polymer-based absorbent materials-Part 10:Determination of extractable polymer content by potentiometric titration
KS M ISO 14530-2-2006(2021) Plastics－Unsaturated－polyester powder moulding compounds(UP－PMCs)－Part 2：Preparation of test specimens and determination of properties
KS P ISO 17190-5-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 5：Gravimetric determination of free swell capacity in saline solution
KS M ISO 12086-2:2011 Plastics-Fluoropolymer dispersions and moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 12086-2:2016 Plastics－Fluoropolymer dispersions and moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS P ISO 17190-3-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 3：Determination of particle size distribution by sieve fractionation
KS C IEC 60811-511:2018 Electric and optical fibre cables — Test methods for non-metallic materials — Part 511: Mechanical tests — Measurement of the melt flow index of polyethylene compounds
KS M ISO 14529-2-2006(2021) Plastics－Melamine/phenolic powder moulding compounds(MP－PMCs)－Part 2：Preparation of test specimens and determination of properties
KS M ISO 14529-2-2006(2016) Plastics－Melamine/phenolic powder moulding compounds(MP－PMCs)－Part 2：Preparation of test specimens and determination of properties
KS C IEC 60455-2-2:2019 Specification for solventless polymerisable resinous compounds used for electrical insulation — Part 2-2: Methods of test —Test methods for coating powders for electrical purposes
KS P ISO 17190-11-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 11：Determination of content of respirable particles
KS M ISO 9924-1-2017(2022) Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isop
KS M ISO 14530-2:2006 Plastics-Unsaturated-polyester powder moulding compounds(UP-PMCs)-Part 2:Preparation of test specimens and determination of properties

AT-ON, How to test and analyze polymers

ONORM S 1820-2001 Testing of textiles - Quantitative analysis of binary mixtures - Polyamide 6.6 or polyamide 6 with other fibres - Formic acid method
ONORM S 1818-2001 Testing of textiles - Quantitative analysis of binary mixtures - Acetat fibres with polyvinyl chloride fibres - Acetic acid method
ONORM S 1801-2001 Testing of textiles - Quantitative analysis of fibre mixtures - General working rules
ONORM S 1805-2001 Testing of textiles - Quantitative analysis of binary mixtures - Natural or regenerated cellulose fibres with polyester fibres - Sulphuric acid method
ONORM S 1815-2001 Testing of textiles - Quantitative analysis of binary mixtures - Polypropylene fibres with other fibres - Xylen (Xylol) method
ONORM S 1816-1982 Testing of textiles; quantitative analysis of binary mixtures, polyvinyl chloride fibres with other fibres; carbon disulphidel acetone method
ONORM S 1821-1982 Testing of textlies; quantitative ana/ysis of binary mixtures; Polyamide 6 6 or Polyamide 6 fibres with other fibres; bydrochloric acid method
ONORM S 1800-2001 Testing of textiles - Quantitative analysis by means of solvent methods - Basis survey
ONORM S 1809-2001 Testing of textiles - Quantitative analysis of binary mixtures - Degummed mulberry silk with wool - Formic acid/zinc chloride method
ONORM S 1817-2001 Testing of textiles - Quantitative analysis of binary mixtures - Acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres - Dimethyl formamide method
ONORM S 1806-2001 Testing of textiles - Quantitative analysis of binary mixtures - Protein fibres with other fibres - Hypochlorite method
ONORM S 1804-1982 Testing of textiles; quantitative analysis of binary mixtures; woolwith other fihres; potassium hydroxide Solution method
ONORM S 1810-2001 Testing of textiles - Quantitative analysis of binary mixtures - Acetate fibres with other fibres - Propane-2-on (Acetone) method
ONORM S 1812-1982 Testing ojtextiles; quantitative analysis oj binary mixtures; casein fihres with other jibres; trypsin method

RO-ASRO, How to test and analyze polymers

STAS SR ISO 7143:1995 Binders for paints and varnishes Aqueous dipersions of polymers and copolymers - General methods of test
STAS SR CEI 455-2+A1-1995 Specification for solventless polymerisable resinous com-pounds used for electrical insulation. Part 2: Methods of test
STAS SR EN 60811-3-1-1995 Insulating and sheathing materials of electric cables Common test methods Part 3: Methods specific to PVC compounds Section 1: Pressure test at high temperature - Tests for resistance to cracking

GM Daewoo, How to test and analyze polymers

GMKOREA EDS-T-7301-2011

国家市场监督管理总局、中国国家标准化管理委员会, How to test and analyze polymers

GB/T 40396-2021 Test method for glass transition temperature of polymer matrix composites—Dynamic mechanical analysis（DMA）
GB/T 35465.5-2020 Test method for fatigue properties of polymer matrix composite materials—Part 5: Flexural fatigue
GB/T 33047.3-2021 Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
GB/T 35465.4-2020 Test method for fatigue properties of polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue
GB/T 12967.3-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 3 : Salt spray test
GB/T 35465.6-2020 Test method for fatigue properties of polymer matrix composite materials—Part 6:Fatige properties of adhesives in shear by tension

British Standards Institution (BSI), How to test and analyze polymers

20/30406596 DC BS ISO 11358-2. Plastics. Thermogravimetry (TG) of polymers. Part 2. Determination of activation energy
BS ISO 11358-3:2013 Plastics. Thermogravimetry (TG) of polymers. Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
BS ISO 11358-3:2021 Plastics. Thermogravimetry (TG) of polymers. Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
BS 2782-4 Methods 452D to 452F:1978 Methods of testing plastics - Chemical properties - Determination of pH of water extract of polyolefin compound - Determination of water-soluble sulphates in polyolefin compound - Determination of water-soluble chlorides in polyolefin compound
BS ISO 4765:2022 Chemically-induced ultraweak photon emission (UPE). Measurement as an analysis method of degradation of polymeric material
BS 2782-4 Method 454G:1996 Methods of testing plastics. Chemical properties. Polymer dispersions. Determination of sieve residue (gross particle and coagulum content)
20/30430827 DC BS EN 12697-15. Bituminous mixtures. Test methods - Part 15. Determination of the segregation sensitivity
DD CEN/TS 14577:2003 Materials and articles in contact with foodstuffs. Plastics. Polymeric additives. Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons
BS EN 12192-2:1999 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Test method for fillers for polymer bonding agents
21/30423455 DC BS ISO 4765. Chemically Induced UPE (ultra-weak photon emission). Measurement as an analysis method of degradation of polymeric material
BS 6829-4.2:1989 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of polyethylene glycols and non-ionic active matter contents
BS ISO 12000:2000 Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Definitions and review of test methods
BS ISO 12000:2014 Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods
21/30437727 DC BS EN 6042. Aerospace series. Organic compounds. Test method. Analysis by infrared spectroscopy
BS 2782-7 Method 740B:1996 Methods of testing plastics. Rheological properties. Polymer dispersions and synthetic rubber latices. Freeze-thaw cycle stability test
BS ISO 22863-5:2021 Fireworks. Test methods for determination of specific chemical substances. Analysis of lead and lead compounds by inductively coupled plasma spectrometry (ICP)
BS ISO 22863-4:2021 Fireworks. Test methods for determination of specific chemical substances. Analysis of lead and lead compounds by X-ray fluorescence spectrometry (XRF)
BS 2782-7 Method 740C:1996 Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
BS PD CEN/TS 16707:2014 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Polymerase chain reaction (PCR) based screening strategies
22/30406868 DC BS ISO 7148-2. Plain bearings. Testing of the tribological behaviour of bearing materials. Part 2. Testing of polymer-based bearing materials
BS 6829 Sec.4.2:1989 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of polyethylene glycols and non-ionic active matter contents
BS EN ISO 12086-2:2006 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Preparation of test specimens and determination of properties
19/30356319 DC BS ISO 10406-3. Fibre-reinforced polymer (FRP) reinforcement of concrete. Test methods - Part 3. CFRP strips
13/30288731 DC BS ISO 10406-2. Fibre-reinforced polymer (FRP) reinforcement of concrete. Test methods. Part 2. FRP sheets
17/30352674 DC BS IEC 62788-6-2. Measurement procedures for materials used in photovoltaic modules. Part 6-2. General tests. Moisture permeation testing with polymeric films
15/30330755 DC BS EN 12697-53. Bituminous mixtures. Test methods. Part 53. Cohesion increase by spreadability-meter method
BS ISO 9924-1:2016 Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS ISO 9924-1:2000 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS ISO 9924-1:2001 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS 6392-3:1983 Testing of ethanol for industrial use - Method for determination of carbonyl compounds content present in moderate amounts (titrimetric method)
BS EN 60811-4-1:2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polypropylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/o
19/30401679 DC BS ISO 22863-5. Fireworks. Test methods for determination of specific chemical substances. Part 5. Analysis of lead and lead compounds by Inductively Coupled Plasma spectrometry (ICP)
BS 7164 Sec.7.1:1990 Chemical tests for raw and vulcanized rubber. Methods for determination of polymer content. Polyisoprene content
BS 2782-1 Method 151A:1984 Methods of testing plastics - Thermal properties - Determination of cold bend temperature of flexible polyvinyl chloride extrusion compound
BS 2782-1 Method 150B:1976 Methods of testing plastics - Thermal properties - Determination of cold flex temperature of flexible polyvinyl compound
BS 2782-2 Method 241A:1984 Methods of testing plastics - Electrical properties - Determination of effect of polyvinyl chloride compound on the loss tangent of polyethylene
19/30401682 DC BS ISO 22863-4. Fireworks. Test methods for determination of specific chemical substances. Part 4. Analysis of lead and lead compounds by X-ray Fluorescence spectrometry (XRF)
BS EN 17101:2018 Thermal insulation products for buildings. Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS)
BS EN ISO 20568-2:2017 Tracked Changes. Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Preparation of test specimens and determination of properties

KR-KS, How to test and analyze polymers

KS M ISO 11358-3-2017 Plastics - Thermogravimetry(TG) of polymers - Part3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
KS C IEC 60811-605-2018 Electric and optical fibre cables — Test methods for non-metallic materials — Part 605: Physical tests — Measurement of carbon black and/or mineral filler in polyethylene compounds
KS C IEC 60811-406-2018 Electric and optical fibre cables — Test methods for non-metallic materials — Part 406: Miscellaneous tests — Resistance to stress cracking of polyethylene and polypropylene compounds
KS C IEC 60811-605-2018(2023) Electric and optical fibre cables — Test methods for non-metallic materials — Part 605: Physical tests — Measurement of carbon black and/or mineral filler in polyethylene compounds
KS M ISO 12086-2-2016 Plastics－Fluoropolymer dispersions and moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS C IEC 60811-407-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
KS C IEC 60811-511-2018 Electric and optical fibre cables — Test methods for non-metallic materials — Part 511: Mechanical tests — Measurement of the melt flow index of polyethylene compounds
KS C IEC 60455-2-2-2019 Specification for solventless polymerisable resinous compounds used for electrical insulation — Part 2-2: Methods of test —Test methods for coating powders for electrical purposes

Association Francaise de Normalisation, How to test and analyze polymers

NF T51-785-3:1994 PLASTICS. DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES. PART 3 : CONDUCTOMETRIC METHOD.
NF P98-857-4*NF EN 12274-4:2018 Slurry surfacing - Test methods - Part 4 : determination of cohesion of the mix
NF U47-016:2021 Animal health analysis methods - Detection of antibodies against equine influenza by the complement fixation test
NF P98-818-15*NF EN 12697-15:2022 Bituminous mixtures - Test methods - Part 15 : determination of the segregation sensitivity
NF EN 12697-15:2022 Mélanges bitumineux - Méthodes d'essai - Partie 15 : détermination de la sensibilité à la ségrégation
NF V08-203*NF EN ISO 22118:2011 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens - Performance characteristics.
NF U47-004:2000 Animal health analysis methods - Detection of antibodies against Brucellosis by the Complement Fixation Test.
NF U47-008:2000 Animal health analysis methods - Detection of antibodies against Ovine epididymitis by the Complement Fixation Test.
NF U47-008:2012 Animal health analysis methods - Detection of antibodies against Ovine epididymitis by the Complement Fixation Test
NF EN 12274-4:2018 Matériaux bitumineux coulés à froid - Méthodes d'essai - Partie 4 : détermination de la cohésion du mélange
NF T51-785-4*NF EN ISO 182-4:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4 : potentiometric method
NF T51-785-3*NF EN ISO 182-3:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3 : conductometric method
XP D25-115*XP CEN/TS 14577:2004 Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons
NF T52-140:1980 Plastics-basic materials for polyurethanes. Determination of the free tolyylenediisocyanate content of prepolymers gas chromatography method.
NF P98-818-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15 : determination of the segregation sensitivity.
NF U47-007:2000 Animal health analysis methods - Detection of antibodies against Avian Chlamydiosis by the Complement Fixation Test.
NF U47-004:2009 Animal health analysis method - Detection of antibodies against Brucellosis by the Complement Fixation Test
XP CEN/TS 14577:2004 Matériaux et objets en contact avec les denrées alimentaires - Matières plastiques - Additifs polymériques - Méthode d'essai pour la détermination de la fraction massique d'un additif polymérique de masse moléculaire inférieure à 1000 daltons
NF T51-241:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
NF T51-785-2*NF EN ISO 182-2:1999 Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Part 2 : pH method.
XP V03-508*XP CEN/TS 16707:2014 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Polymerase chain reaction (PCR) based screening strategies
XP CEN/TS 16707:2014 Produits alimentaires - Méthodes d'analyse pour la détection des organismes génétiquement modifiés et des produits dérivés - Stratégies de criblage basées sur l'utilisation de la réaction de polymérisation en chaîne (PCR)
NF ISO 22863-5:2021 Artifices de divertissement - Méthodes d'essai pour la détermination de substances chimiques spécifiques - Partie 5 : analyse du plomb et de ses composés par spectrométrie à plasma à couplage inductif (ICP)
NF T30-711:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
NF S57-037-5*NF ISO 22863-5:2021 Fireworks - Test methods for determination of specific chemical substances - Part 5 : analysis of lead and lead compounds by inductively coupled plasma spectrometry (ICP)
NF U47-001:2000 Animal health analysis methods - Detection of antibodies against Contagious Agalactia by the Complement Fixation Test.
NF U47-007:2009 Animal health analysis methods - Detection of antibodies against Avian Chlamydiosis by the Complement Fixation Test.
NF T51-604-2*NF EN ISO 14530-2:2000 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2 : preparation of test specimens and determination of properties
NF C32-011-605*NF EN 60811-605:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605 : physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
NF C32-011-407*NF EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407 : miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
NF U47-006:2009 Animal health analysis methods - Detection of antibodies against Chlamydiosis and/or Q Fever in mammals by the Complement Fixation Test.
NF U47-006:2000 Animal health analysis methods - Detection of antibodies against Chlamydiosis and/or Q Fever in mammals by the Complement Fixation Test.
NF EN 62321-8:2017 Détermination de certaines substances dans les produits électrotechniques - Partie 8 : analyse des phtalates dans les polymères par chromatographie en phase gazeuse-spectrométrie de masse (GC-MS), chromatographie en phase gazeuse-spectrométrie de ...
NF T50-015-2*NF EN ISO 24025-2:2020 Plastics - Sulfone polymer moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF EN IEC 62788-6-2:2020 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 6-2 : essais génériques - Essais de perméation à l'humidité des matériaux polymères
NF S57-037-4*NF ISO 22863-4:2021 Fireworks - Test methods for determination of specific chemical substances - Part 4 : analysis of lead and lead compounds by X-ray fluorescence spectrometry (XRF)
NF ISO 22863-4:2021 Artifices de divertissement - Méthodes d'essai pour la détermination de substances chimiques spécifiques - Partie 4 : analyse du plomb et de ses composés par spectrométrie de fluorescence des rayons X (XRF)
NF C32-011-511*NF EN 60811-511:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: mechanical tests - Measurement of the melt flow index of polyethylene compounds
NF EN 62321-3-2:2014 Détermination de certaines substances dans les produits électrotechniques - Partie 3-2 : méthodes d'essais - Brome total dans les polymères et les produits électriques par Combustion - Chromatographie d'ionisation
NF T51-553-2*NF EN ISO 20568-2:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF EN ISO 20568-2:2017 Plastiques - Polymères fluorés : dispersions et matériaux pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF C32-011-511/A1*NF EN 60811-511/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511 : mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds
NF EN ISO 24025-2:2020 Plastiques - Matériaux à base de polymères sulfone pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés

Danish Standards Foundation, How to test and analyze polymers

DS/EN 12274-4:2003 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
DS/EN 12192-2:1999 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents
DS/EN 60811-605:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
DS/CEN/TS 14577:2004 Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons
DS/ISO 22863-5:2021 Fireworks – Test methods for determination of specific chemical substances – Part 5: Analysis of lead and lead compounds by inductively coupled plasma spectrometry (ICP)
DS/EN 60811-513:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
DS/ISO 22863-4:2021 Fireworks – Test methods for determination of specific chemical substances – Part 4: Analysis of lead and lead compounds by X-ray fluorescence spectrometry (XRF)
DS/ISO 17190-10:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 10: Determination of extractable polymer content by potentiometric titration
DS/EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
DS/IEC/TS 62282-7-1:2012 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
DS/EN ISO 12086-2/AC:2009 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 12086-2:2006 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/ISO 17190-10:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 10: Test method for determination of extractable polymer content by potentiometric titration

Lithuanian Standards Office , How to test and analyze polymers

LST EN 12274-4-2003 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
LST EN 12192-2-2000 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents
LST EN 60811-605-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds (IEC 60811-605:2012)
LST EN 60811-513-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning (IEC 60811-513:2012)
LST EN 60811-510-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air (IEC 60811-510:2012)

AENOR, How to test and analyze polymers

UNE-EN 12274-4:2003 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
UNE-EN 12192-2:1999 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. GRANULOMETRY ANALYSIS. PART 2: TEST METHOD FOR FILLERS FOR POLYMER BONDING AGENTS.
UNE-EN 60811-605:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
UNE-CEN/TS 14577:2005 EX Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1 000 Daltons
UNE-EN 60811-513:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
UNE 53413:1987 PLASTICS. FLEXIBLE COATINGS BASED ON POLYMERS IN AQUEOUS DISPERSION, UN REINFORCED FOR IMPERMEABILIZATIONS "IN SITU" OF THE BUILDINGS. CHARACTERISTICS AND TEST METHOD
UNE-EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds

ES-UNE, How to test and analyze polymers

UNE-EN 12274-4:2020 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
UNE-EN 12697-15:2022 Bituminous mixtures - Test methods - Part 15: Determination of the segregation sensitivity
UNE-EN IEC 62788-6-2:2020 Measurement procedures for materials used in photovoltaic modules - Part 6-2: General tests - Moisture permeation testing of polymeric materials (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN ISO 24025-2:2021 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020)
UNE-EN 12697-53:2022 Bituminous mixtures - Test methods - Part 53: Cohesion increase by spreadability-meter method
UNE-EN 60811-511:2012/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to test and analyze polymers

GB/T 35465.1-2017 Test method for fatigue properties of polymer matrix composite materials—Part 1：General principle
GB/T 35465.3-2017 Test method for fatigue properties of polymer matrix composite materials -Part 3: Tension-tension fatigue
GB/T 35465.2-2017 Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data
GB/T 31984-2015 Test method for determining the content of vinyl acetate in ethylene-vinyl acetate copolymer applied in photovoltaic modules—Thermal gravimetric analysis (TGA)

International Organization for Standardization (ISO), How to test and analyze polymers

ISO 182-3:1993 Plastics; determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures; part 3: conductometric method
ISO 182-4:1993 Plastics; determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures; part 4: potentiometric method
ISO 12000:1996 Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Definitions and review of test methods
ISO 4765:2022 Chemically-induced ultra-weak photon emission (UPE) — Measurement as an analysis method of degradation of polymeric material
ISO 182-1:1990 Plastics; determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures; part 1: Congo red method
ISO 182-2:1990 Plastics; determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures; part 2: pH method
ISO 16014-1:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles
ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
ISO 19699-1:2017 Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods
ISO/DIS 7148-2 Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials
ISO/TS 21569-2:2021 Molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 2: Construct-specific real-time PCR method for detection of event FP967 in linseed and linseed products
ISO 22863-5:2021 Fireworks - Test methods for determination of specific chemical substances - Part 5: Analysis of lead and lead compounds by inductively coupled plasma spectrometry (ICP)
ISO 16014-1:2003/Cor 1:2005 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles; Technical Corrigendum 1
ISO/TS 21569-2:2012 Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 2: Construct-specific real-time PCR method for detection of event FP967 in linseed and linseed produc
ISO 25137-2:2009 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 24025-2:2020 Plastics — Sulfone polymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 22863-4:2021 Fireworks - Test methods for determination of specific chemical substances - Part 4: Analysis of lead and lead compounds by X-ray fluorescence spectrometry (XRF)
ISO 17190-10:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 10: Determination of extractable polymer content by potentiometric titration
ISO 12086-2:2006 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 12086-2:1995 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 20568-2:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 9924-1:1993 Rubber and rubber products; determination of composition of vulcanizates and uncured compounds by thermogravimetry; part 1: butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 17190-1:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 1: Determination of pH
ISO 14530-2:1999 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties
ISO 17190-3:2001 Urine absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 3: Determination of particle size distribution by sieve fractionation

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to test and analyze polymers

PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)

Military Standard of the People's Republic of China-General Armament Department, How to test and analyze polymers

GJB 770.204-1994 Test methods for gunpowder analysis - Determination of content of metals and metal compounds - Complexometric titration method

GOSTR, How to test and analyze polymers

GOST 34404-2018 Furniture, timber and polymers. Method for determining the release of harmful volatile organic compounds in climatic chambers using chromatographic analysis
GOST R ISO 17190-3-2019 Urine-absorbing aids for incontinence. Test methods for characterizing polymer-based absorbent materials. Part 3. Determination of particle size distribution by fractionation
GOST R ISO 17190-1-2019 Urine-absorbing aids for incontinence. Test methods for characterizing polymer-based absorbent materials. Part 11. Determination of pH

未注明发布机构, How to test and analyze polymers

BS 6319-11:1993(1999) Testing of resin and polymer / cement compositions for use in construction — Part 11 : Methods for determination of creep in compression and in tension
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength
BS 6319-12:1992(1999) Testing of resin and polymer / cement compositions for use in construction — Part 12 : Methods for measurement of unrestrained linear shrinkage and coefficient of thermal expansion
BS 2782-4-Method 452B:1993 Methods of testing Plastics Part 4 . Chemical properties Method 452B.Determination of carbon black content of polyolefin compound
BS EN ISO 25137-2:2017 Plastics — Sulfone polymer moulding and extrusion materials Part 2 : Preparation oftest specimens and determination ofproperties
BS 598-102:2003(2004) Sampling and examination of bituminous mixtures for roads and other paved areas — Part 102 : Analytical test methods

Standard Association of Australia （SAA）, How to test and analyze polymers

AS 2001.7.10:1983 METHODS OF TEST FOR TEXTILES PART 7-QUANTITATIVE ANALYSIS OF FIBRE MIXTURES AS 2001.7.10 BINARY MIXTURES OF CERTAIN CELLULOSE FIBRES AND POLYESTER (METHOD USING SULPHURIC ACID 75 PERCENT m/m)
AS 2614:1998 Copper and copper alloys - Sampling for chemical and spectrochemical analysis, and physical testing
AS 4351.5:1996 Biodegradability - Organic compounds in an aqueous medium - Determination by analysis of biochemical oxygen demand (closed bottle test)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to test and analyze polymers

GB/T 12688.3-2011 Test method of styrene for industrial use—Part 3:Determination of content of polymer
GB/T 36374.2-2018 Plastics.Sulfone polymer moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties
GB/T 43084.2-2023 Plastic fluoropolymer dispersions, molding and extrusion materials Part 2: Specimen preparation and property determination
GB/T 20405.1-2006 Urine-absorbing aids for incontinence.Test methods for characterizing Polymer-based absorbent materials.Part 1:Determination of pH
GB/T 20405.3-2006 Urine-absorbing aids for incontinence. Test methods for characterizing Polymer-based absorbent materials. Part 3: Determination of particle size distribution by sieve fractionation

IT-UNI, How to test and analyze polymers

UNI 4818-P7-1974

CEN - European Committee for Standardization, How to test and analyze polymers

EN 12697-11:2005 Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and bitumen

YU-JUS, How to test and analyze polymers

JUS F.S3.145/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres. Sulphuric acid method. Amendments
JUS F.S3.145-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of chlorofibres (homopolymers of vinyl chloride) and cer ta in other fibres. Suplhuric acid method

CENELEC - European Committee for Electrotechnical Standardization, How to test and analyze polymers

EN 60811-605:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605 : Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds

Group Standards of the People's Republic of China, How to test and analyze polymers

T/CSRA 21-2022 Plastic composition test Polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), ethylene-vinyl acetate copolymer (EVA), polyethylene terephthalate in plastic products Esters (PET) Qualitative Analysis Method

IN-BIS, How to test and analyze polymers

AASHTO - American Association of State Highway and Transportation Officials, How to test and analyze polymers

T 37-2006 Standard Method of Test for Sieve Analysis of Mineral Filler for Hot-Mix Asphalt (ASTM Designation D 546-99(2005))
TP 63-2003 Standard Method of Test for Determining Rutting Susceptibility of Asphalt Paving Mixtures Using the Asphalt Pavement Analyzer (APA)

European Committee for Electrotechnical Standardization（CENELEC）, How to test and analyze polymers

EN 60811-513:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
HD 307.2.2 S1-1989 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test. Test Methods for Coating Powders for Electrical Purposes
EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds

International Electrotechnical Commission (IEC), How to test and analyze polymers

IEC 60811-511:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds
IEC 60811-605:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
IEC 62321-6:2015 Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)
IEC 105/241/DTS:2009 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
IEC 60811-511:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds; Amendment 1
IEC 60811-511:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds
IEC 60811-511:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds

农业农村部, How to test and analyze polymers

NY/T 1860.35-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 35: Determination of Polymer Molecular Weight and Molecular Weight Distribution (Gel Permeation Chromatography)
NY/T 1860.36-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 36: Determination of Low Molecular Weight Components of Polymers (Gel Permeation Chromatography)

ES-AENOR, How to test and analyze polymers

UNE 80-265-1988

IEC - International Electrotechnical Commission, How to test and analyze polymers

TS 62282-7-1-2010 Fuel cell technologies – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC) (Edition 1.0)