ZH
RU
ES

Petroleum Operations Analysis

Petroleum Operations Analysis, Total:500 items.

In the international standard classification, Petroleum Operations Analysis involves: Materials for aerospace construction, Petroleum products in general, Fuels, Equipment for petroleum and natural gas industries, Lubricants, industrial oils and related products, Measurement of volume, mass, density, viscosity, Petroleum, petroleum products and natural gas handling equipment, Metalliferous minerals, Occupational safety. Industrial hygiene, Water quality, Company organization and management, Sugar. Sugar products. Starch, Accident and disaster control, Extraction and processing of petroleum and natural gas, Valves, Non-destructive testing, Road engineering, Quality, Testing of metals, Pipeline components and pipelines, Welding, brazing and soldering, Thermodynamics and temperature measurements, Analytical chemistry, Plastics, Environmental protection, Wastes, Fluid power systems, Fluid storage devices, Waxes, bituminous materials and other petroleum products, Optics and optical measurements, Metrology and measurement in general, Crude petroleum, Buildings, Mechanical testing, Coals, Medical sciences and health care facilities in general, Protection against dangerous goods, Rubber and plastics products, Industrial automation systems, Applications of information technology, Production in the chemical industry, Construction materials, Construction industry, Domestic safety, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Education, Geology. Meteorology. Hydrology, Protection against crime, Air quality, Hydraulic energy engineering, Internal combustion engines for road vehicles, Pesticides and other agrochemicals, Nuclear energy engineering.

United States Navy, Petroleum Operations Analysis

NAVY MIL-HDBK-201 B CHG NOTICE 1-1992 PETROLEUM OPERATIONS

American Society for Testing and Materials (ASTM), Petroleum Operations Analysis

ASTM D7453-18 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
ASTM D7453-17 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
ASTM D4057-06(2011) Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D4057-12 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D1265-11 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D7152-11 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
ASTM E60-11 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
ASTM UOP1033-19 Total Mercury Analysis in Liquefied Petroleum Gases
ASTM F1788-08 Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
ASTM D5172-91(2004) Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
ASTM E1953-98 Standard Practice for Description of Thermal Analysis Apparatus
ASTM D7740-11 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
ASTM D570-95 Standard Test Method for Water Absorption of Plastics
ASTM D5709-95(2000)e1 Standard Test Method for Sieve Analysis of Petroleum Coke
ASTM D5709-95(2005) Standard Test Method for Sieve Analysis of Petroleum Coke
ASTM D5709-09 Standard Test Method for Sieve Analysis of Petroleum Coke
ASTM D4174-89(1999) Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
ASTM D4174-89(2010) Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
ASTM D4174-15 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
ASTM D4178-82(2017) Standard Practice for Calibrating Moisture Analyzers
ASTM D3172-13 Standard Practice for Proximate Analysis of Coal and Coke
ASTM D5709-22 Standard Test Method for Sieve Analysis of Petroleum Coke
ASTM D5442-93(2003)e1 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
ASTM D5442-93(2008) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
ASTM E1880-97(2002) Standard Practice for Tissue Cryosection Analysis with SIMS
ASTM D2548-69 Method of Analysis of Oil Soluble Petroleum Sulfonates by Liquid Chromatography
ASTM E1049-85(2011)e1 Standard Practices for Cycle Counting in Fatigue Analysis
ASTM D2013/D2013M-11 Standard Practice for Preparing Coal Samples for Analysis
ASTM D4422-19 Standard Test Method for Ash in Analysis of Petroleum Coke
ASTM D4422-13 Standard Test Method for Ash in Analysis of Petroleum Coke
ASTM D7717-11 Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis
ASTM D3650-93(2006) Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
ASTM UOP741-86 Paraffin and Naphthene Distribution by Carbon Number of Saturated Petroleum Distillates by GC
ASTM D7343-18 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-12(2017) Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D4422-94(1998) Standard Test Method for Ash In Analysis of Petroleum Coke
ASTM D4422-03 Standard Test Method for Ash in Analysis of Petroleum Coke
ASTM D4422-03(2008) Standard Test Method for Ash in Analysis of Petroleum Coke
ASTM D5709-09(2015) Standard Test Method for Sieve Analysis of Petroleum Coke
ASTM G210-13(2018) Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
ASTM E50-11 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM D4307-99(2004) Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D4307-99 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM UOP986-08 Arsenic in Heavy Petroleum Fractions using Microwave Digestion and Graphite Furnace-AAS
ASTM D5442-93(1998) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
ASTM D5442-93(2013) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
ASTM D6362-98 Standard Practice for Certificates of Reference Materials for Water Analysis
ASTM D6362-98(2003) Standard Practice for Certificates of Reference Materials for Water Analysis
ASTM D1946-90(2011) Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM E1970-06 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM D6969-17 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM D8244-20 Standard Guide for Analytical Laboratory Operations Supporting the Cannabis Industry
ASTM E1699-00(2005) Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems
ASTM E1699-00 Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems
ASTM D3976-92(2010) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM D5058-12 Standard Practices for Compatibility of Screening Analysis of Waste
ASTM E2013-99 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
ASTM E2013-06 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
ASTM E2013-12 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
ASTM D6969-03 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM UOP779-08 Chloride in Petroleum Distillates by Microcoulometry
ASTM D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM D2332-84(2003) Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM D2332-13 Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM D3712-05 Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
ASTM D3712-05(2011) Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
ASTM D3650-93(2011) Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
ASTM E168-99 Standard Practices for General Techniques of Infrared Quantitative Analysis
ASTM E334-01 Standard Practice for General Techniques of Infrared Microanalysis
ASTM A751-08 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM D5172-91(2010)e1 Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
ASTM E168-06 Standard Practices for General Techniques of Infrared Quantitative Analysis
ASTM G210-13 Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
ASTM D5702-07(2012) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
ASTM G210-13(2023) Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
ASTM E334-01(2007) Standard Practice for General Techniques of Infrared Microanalysis
ASTM D5443-23 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography
ASTM D6970-03 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
ASTM D6970-03(2019) Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
ASTM D5442-17(2021) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
ASTM C1411-14 Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis

API - American Petroleum Institute, Petroleum Operations Analysis

API PUBL 1625-1979 Analysis of Temperature Effects on Gasoline Marketing Operations
API RP 2201-2003 Safe Hot Tapping Practices in the Petroleum & Petrochemical Industries (Fifth Edition)
API PUBL 2219-1986 Safe Operation of Vacuum Trucks in Petroleum Service (First Edition)
API PUBL 2219-1999 Safe Operation of Vacuum Trucks in Petroleum Service (Second Edition)
API PUBL 28-30724-1980 Comprehensive Analysis of Petroleum Coke Products
API RP 2219-2005 Safe Operation of Vacuum Trucks in Petroleum Service (THIRD EDITION)
API MPMS 4.8-2013 Manual of Petroleum Measurement Standards Chapter 4.8 Operation of Proving Systems (Second Edition)
API PUBL 2557-1993 Vapor Collection and Control Options for Storage and Transfer Operations in the Petroleum Industry
API MPMS TR 2570-2010 Continuous On-line Measurement of Water Content in Petroleum (Crude Oil and Condensate) (First Edition)
API PUBL 4750-2008 Cyanide Discharges in the Petroleum Industry: Sources and Analysis
API PUBL 4694-1999 Laboratory Analysis of Petroleum Industry Wastewaters Arranging for Analysis and Understanding Laboratory Reports
API MPMS 4.8-1995 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems
API PUBL 4635-1996 Compilation of Field Analytical Methods for Assessing Petroleum Product Releases
API PUBL 4599-1994 Interlaboratory Study of Three Methods for Analyzing Petroleum Hydrocarbons in Soils

U.S. Military Regulations and Norms, Petroleum Operations Analysis

ARMY QPL-6083-2012 Hydraulic Fluid, Petroleum Base, for Preservation and Operation
ARMY QPL-6083-2013 Hydraulic Fluid, Petroleum Base, for Preservation and Operation

Professional Standard - Petroleum, Petroleum Operations Analysis

SY/T 5526-1992 Oil Rig Installation Operation and Maintenance
SY/T 6560-2003 Rules on electric safety operations of offshore oil facilities
SY/T 5048-1994 Specifications for installation, operation and maintenance of 190 series diesel engines for oil drilling rigs
SY/T 6945-2013 Guidelines on the failure analysis for petroleum tubular goods
SY 6945-2013 Guidelines for Failure Analysis of Petroleum Pipelines
SY/T 6240-2016 Recommended practice for chemical analysis of barite
SY/T 6240-2008 Recommended practice for chemical analysis of barite
SY 6240-2016 Recommended Practice for Chemical Analysis of Barite
SY/T 6232-1996 Classification of experimental equipment for petroleum core analysis
SY/T 5119-1995 Tomographic Analysis Method of Rock Soluble Organisms and Crude Group Components
SY/T 5119-2008 Analysis method for fractions of rock extract and crude oil
SY/T 6358-2008 Classification on intensity of physical work for petroleum fieldwork
SY/T 6358-1998 Classification on intensity of physical work for petroleun fieldwork
SY 6358-2008 Classification of Physical Labor Intensity for Petroleum Field Operations
SY/T 5121-1986 Infrared spectroscopic analysis method of rock organic matter and crude oil
SY/T 5779-2008 Analytical method of hydrocarbons in petroleum and sediment by gas chromatography
SY 5779-2008 Gas Chromatographic Analysis Method for Petroleum and Sedimentary Organic Matter Hydrocarbons
SY/T 5239-1991 Methods for Hydrogen and Carbon Isotope Analysis of Petroleum and Sedimentary Organic Matter

RU-GOST R, Petroleum Operations Analysis

GOST R 54982-2012 Gas distribution systems. Objects of liquid petroleum gases. General requirements for operation. Operational documentation
GOST R 54983-2012 Gas distribution systems. Natural gas distribution networks. General requirements for operation. Operational documentation
GOST R 54982-2022 Gas distribution systems. Objects of liquid petroleum gases. General requirements for operation. Operational documentation
GOST R 55435-2013 Oil and oil products trunk pipeline transportation. Operation and maintenance. General principles
GOST 34182-2017 Oil and oil products trunk pipeline transportation. Operation and maintenance. General principles
GOST R EN 12177-2008 Liquid petroleum products. Petroleum. Determination of benzene content by method of gas chromatography
GOST R ISO 13628-4-2016 Petroleum and natural gas industries. Design and operation of subsea production systems. Part 4. Subsea wellhead and tree equipment
GOST 31953-2012 Water. Determination of oil products using gas chromatography method
GOST R ISO 13628-3-2013 Petroleum and natural gas industries. Design and operation of subsea production systems. Part 3. Through flowline (TFL) systems
GOST R 59305-2021 Petroleum and natural gas industry. Design and operation of subsea production systems. Part 1. General requirements and recommendations
GOST R 59306-2021 Petroleum and natural gas industry. Design and operation of subsea production systems. Part 10. Specification for bonded flexible pipe
GOST R 56000-2014 Petroleum and natural gas industry. Offshore production units. Operations in arctic conditions. General requirements
GOST R 59299-2021 Petroleum and natural gas industry. Design and operation of subsea production systems. Part 3. Through flowline (TFL) systems
GOST R 56400-2015 Petroleum and natural gas industries. Design and operation of offshore terminals of liquefied natural gas. General requirements

YU-JUS, Petroleum Operations Analysis

JUS B.H0.531-1988 Petroleum andpetroleum products. Storage and manipulation allowance for evaporation losses

Group Standards of the People's Republic of China, Petroleum Operations Analysis

T/JMJLXH 001-2022 Liquefied Petroleum Gas Filling Operation Procedures (YSP35.5 Liquefied Petroleum Gas Cylinders)
T/JMJLXH 002-2022 Liquefied Petroleum Gas Filling Operation Procedures (YSP118 Liquefied Petroleum Gas Cylinders)
T/CAGDE 209-2022 Specifications for inspection and maintenance of on-line analytical instruments in petrochemical industry
T/CAGDE 208-2022 Specifications for Maintenance and Operation of On-line Analytical Instruments in Petrochemical Industry
T/GDASE 0024-2021 Specifications for practical skills test for filling liquefied petroleum gas cylinders
T/CMA 035-2021 Calibration method for coulomb analysis of petroleum products
T/AHEMA 13-2022 Operation Specification in Chemical Titration Analysis?For Inspection and Testing Organization
T/CACM 015.7-2017 Technical specifications for statistical analysis of clinical research of traditional Chinese medicine
T/LZZLXH 059-2021 Operating procedures for chemical analysis and titration of inspection and testing institutions
T/LZZLXH 062-2021 Operating procedures for chemical analysis pipetting of inspection and testing institutions
T/SHMHZQ 030-2022 Specification of big data mining and analysis system for petrochemical Industry
T/CPCIF 0241-2023 Guidelines for process hazard analysis in petroleum and chemical enterprises
T/SHST 000011-2021 Practical Operation Assessment Requirements for Stone Construction Part 1: Stone Back Bolt Dry Hanging
T/SHST 000012-2021 Practical Operation Assessment Requirements for Stone Construction Part 2: Dry Hanging of Stone Grooves
T/SHST 000014-2021 Practical operation assessment requirements for stone construction Part 4: Wet paste of stone floors
T/SHST 000016-2021 Practical operation assessment requirements for stone construction Part 6: Wet paste of stone walls
T/SHST 000015-2021 Practical operation assessment requirements for stone construction Part 5: Dry paste of stone floors
T/SHST 000013-2021 Practical Operation Assessment Requirements for Stone Construction Part 3: Stone Short Groove Dry Hanging
T/CCSAS 001-2018 Guidelines for Quality Control and Review for HAZOP Studies
T/GXAS 003-2017 Gas chromatography analysis method of caryophyllene in heavy turpentine
T/SDNY 025-2021 Code of practice for safe production of pesticide dispersible oil suspension concentrate
T/SDNY 021-2021 Pesticide dispersible oil suspension concentrate production process operating procedures

US-FCR, Petroleum Operations Analysis

FCR NAV MO-230-1990 MAINTENANCE AND OPERATION OF PETROLEUM FUEL FACILITIES
FCR DOE-DP-STD-3016-99-1999 HAZARD ANALYSIS REPORTS FOR NUCLEAR EXPOLSIVE OPERATIONS

U.S. Air Force, Petroleum Operations Analysis

AIR FORCE AF I21-124-2003 OIL ANALYSIS PROGRAM

IN-BIS, Petroleum Operations Analysis

Association Francaise de Normalisation, Petroleum Operations Analysis

NF EN 13952:2017 Équipements pour gaz de pétrole liquéfiés et leurs accessoires - Opérations de remplissage des bouteilles de GPL
NF M88-736*NF EN 13952:2017 LPG equipment and accessories - Filling operations for LPG cylinders
NF M87-208-9*NF EN ISO 13628-9:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9 : remotely Operated tool (ROT) intervention systems.
NF EN 16652-1:2016 Équipements GPL et leurs accessoires - Ateliers pour véhicules automobiles fonctionnant au GPL - Partie 1 : zones de travail et modes opératoires
NF EN 15522-2:2023 Identification des pollutions pétrolières - Pétrole et produits pétroliers - Partie 2 : méthode d'analyse et interprétation des résultats sur la base des analyses par CPG DIF et CPG-SM faible résolution
NF M87-208-5*NF EN ISO 13628-5:2013 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5 : subsea umbilicals
NF M87-208-8*NF EN ISO 13628-8:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8 : remotely Operated Vehicle (ROV) interfaces on subsea production systems
NF M87-208-4:2012 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4 : subsea wellhead and tree equipment.
NF EN 732:1999 Spécifications pour les appareils fonctionnant exclusivement aux gaz de pétrole liquéfiés - Réfrigérateurs à absorption.
NF M87-208-3*NF EN ISO 13628-3:2001 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3 : through flowline (TFL) systems
NF EN ISO 7278-2:2022 Systèmes de mesurage des produits pétroliers - Partie 2 : conception, étalonnage et fonctionnement des tubes étalons
NF EN ISO 13628-9:2009 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 9 : systèmes d'intervention utilisant des dispositifs à commande à distance (ROT)
NF M88-730:2011 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated.
NF M88-730*NF EN ISO 15995:2021 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated
NF EN 521+AC:2019 Spécifications pour les appareils fonctionnant exclusivement aux gaz de pétrole liquéfiés - Appareils portatifs alimentés à la pression de vapeur des gaz de pétrole liquéfiés
NF EN ISO 13628-8:2009 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 8 : véhicules commandés à distance pour l'interface avec les matériels immergés
NF M87-208-7*NF EN ISO 13628-7:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7 : completion/workover riser systems.
NF M88-757:2013 LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
NF M87-208-1*NF EN ISO 13628-1:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1 : general requirements and recommendations
NF M87-243-4*NF EN ISO 14692-4:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4 : fabrication, installation and operation
NF EN ISO 13628-5:2013 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 5 : faisceaux de câbles immergés
NF M87-248*NF EN ISO 10417:2004 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
NF M87-242*NF EN ISO 10418:2004 Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems
NF EN ISO 13628-3:2001 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production sous-marins - Partie 3 : systèmes d'injection TFL
NF UTE C15-150-22:2001 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production sous-marins - Partie 3 : systèmes d'injection TFL
NF ISO 4389:2001 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production sous-marins - Partie 3 : systèmes d'injection TFL
NF ISO 15593:2001 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production sous-marins - Partie 3 : systèmes d'injection TFL
NF EN ISO 13628-15:2015 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 15 : structures et manifolds
NF EN 13277-4:2001 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production sous-marins - Partie 3 : systèmes d'injection TFL
NF EN 15202:2019 Équipements pour GPL et leurs accessoires - Dimensions opérationnelles essentielles des connexions des robinets et valves de bouteilles de GPL et des équipements associés
NF C46-225*NF EN 61115:1994 Expression of performance of sample handling systems for process analyzers.
NF EN 61115:1994 Expression des qualités de fonctionnement des systèmes de manipulation d'échantillon pour analyseurs de processus
NF EN ISO 13628-10:2010 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 10 : spécification pour canalisations flexibles composites
NF M87-215*NF EN ISO 20312:2013 Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components
NF EN ISO 10417:2004 Industries du pétrole et du gaz naturel - Systèmes de vannes de protection de fond de puits - Étude, installation, fonctionnement et réparation
NF M87-256-4:2013 Petroleum and natural gas industries - Drilling and production equipment - Part 4: practices for side-pocket mandrels and related equipment
NF EN ISO 13628-1:2006 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 1 : exigences générales et recommandations
NF EN ISO 13628-6:2010 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 6 : commandes pour équipements immergés
NF EN ISO 13624-1:2010 Industries du pétrole et du gaz naturel - Équipements de forage et de production - Partie 1 : conception et exploitation des tubes prolongateurs pour les forages en mer
NF M07-119-3:2008 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3 : crude oil.
NF M07-119-3*NF EN 15199-3:2020 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3 : crude oil
NF M87-208-6*NF EN ISO 13628-6:2010 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6 : subsea production control systems
NF M87-264-1*NF EN ISO 19901-1:2016 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1 : metocean design and operating considerations

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Petroleum Operations Analysis

GB/Z 42520-2023 Guidelines for X-ray fluorescence spectrometric laboratory practice for the analysis of iron ores
GB/T 41066.3-2022 Petroleum drilling and production equipment—Offshore semisubmersible drilling unit—Part 3：Operations and surveys
GB/T 24956-2010 Recommended practice for petroleum and natural gas industries.Drill stem design and operating limits
GB/T 21412.9-2009 Petroleum and natural gas industries.Design and operation of subsea production systems.Part 9:Remotely Operated Tool(ROT) intervention systems
GB/T 17923-1999 Analysis method for oil-bearing waste water from marine petroleum development industry
GB/T 21412.3-2009 Petroleum and natural gas industries.Design and operation of subsea production systems.Part 3:Through flowline(TFL)systems
GB/T 10410.3-1989 Analysis of liquefied petroleum gas composition by gas chromatography
GB/T 8423.4-2022 Petroleum and natural gas industries terminology — Part 4: Measurement and analysis of petroleum and natural gas
GB/T 30217.1-2013 Petroleum and natural gas industries.Drilling and production equipment.Part 1:Design and operation of marine drilling riser equipment
GB/T 22342-2008 Petroleum and natural gas industries.Subsurface safety valve systems.Design,installation,operation and redress
GB/T 21412.5-2010 Petroleum and natural gas industries.Design and operation of subsea production systems.Part 5:Subsea umbilicals
GB/T 33464-2016 Guidelines for preparing and using standard operation procedures for chemical analysis
GB/T 21412.4-2008 Petroleum and natural gas industries.Design and operation of subsea production system.Part 4:Subsea wellhead and tree equipment
GB/T 21412.4-2013 Petroleum and natural gas industries.Design and operation of subsea production systems.Part 4: Subsea wellhead and tree equipment
GB/T 21412.2-2022 Petroleum and natural gas industries—Design and operation of subsea production systems—Part 2:Unbonded flexible pipe systems for subsea and marine applications
GB/T 21412.6-2009 Petroleum and natural gas industries.Design and operation of subsea production systems.Part 6:Subsea production control systems
GB/T 21412.1-2010 Petroleum and natural gas industries.Design and operation of subsea production systems.Part 1:General requirements and recommendations
GB/T 32492-2016 Content of dimethyl ether in liquefied petroleum gas by gas chromatography

ES-AENOR, Petroleum Operations Analysis

UNE 30 149

AENOR, Petroleum Operations Analysis

UNE 30149:1960 ANALYSIS REAGENTS. PETROLEUM ETHER.
UNE-EN 13952:2017 LPG equipment and accessories - Filling operations for LPG cylinders

German Institute for Standardization, Petroleum Operations Analysis

DIN EN 13952:2017-09 LPG equipment and accessories - Filling operations for LPG cylinders; German version EN 13952:2017
DIN EN ISO 7278-2:2023-03 Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022); German version EN ISO 7278-2:2022
DIN EN ISO 13628-9:2008-01 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-9:2000); English version EN ISO 13628-9:2006
DIN EN ISO 13628-5:2010 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009); English version EN ISO 13628-5:2009, only on CD-ROM
DIN EN ISO 13628-3:2003 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000); German and English version EN ISO 13628-3:2000
DIN EN 15522-2:2022 Oil spill identification - Petroleum and Petroleum related products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-low resolution-MS analyses; German and English version prEN 15522-2:2022
DIN EN 15522-2:2023-07 Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses; German version EN 15522-2:2023
DIN EN 15522-2:2021 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses; German and English version prEN 15522-2:2020
DIN 51451:2020-02 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN EN ISO 15995:2021-09 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2021); German version EN ISO 15995:2021
DIN EN ISO 7278-2:2023 Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022)
DIN 51451:2004 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN EN ISO 13628-9:2008 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-9:2000); English version EN ISO 13628-9:2006
DIN EN ISO 13628-7:2007 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005); English version EN ISO 13628-7:2006
DIN EN 15202:2020-04 LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections; German version EN 15202:2019
DIN EN ISO 20312:2012-01 Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011); English version EN ISO 20312:2011
DIN EN ISO 14692-4:2018-02 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017); English version EN ISO 14692-4:2017
DIN EN ISO 13628-4:2011-09 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:2010 + Cor. 1:2011); English version EN ISO 13628-4:2010 + AC:2011, only on CD-ROM
DIN EN ISO 10418:2005 Petroleum and natural gas industries - Offshore production installations - Analysis, design, installation and testing of basic surface process safety systems (ISO 10418:2003); English version EN ISO 10418:2003
DIN EN ISO 10417:2005-07 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004); English version EN ISO 10417:2004
DIN EN ISO 10417:2005 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004); English version EN ISO 10417:2004
DIN EN ISO 14692-4:2005 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002); English version EN ISO 14692-4:2002
DIN EN ISO 13628-5:2010-05 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009); English version EN ISO 13628-5:2009, only on CD-ROM
DIN CEN/TR 15522-2:2012 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses; English version CEN/TR 15522-2:2012
DIN EN ISO 13628-8:2008 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems (ISO 13628-8:2002); English version EN ISO 13628-8:2006
DIN EN ISO 13624-1:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment (ISO 13624-1:2009); English version EN ISO 13624-1:2009
DIN EN ISO 13628-10:2007 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2005); English version EN ISO 13628-10:2006
DIN EN ISO 13628-15:2012-01 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011); English version EN ISO 13628-15:2011
DIN EN ISO 13628-10:2007-01 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2005); English version EN ISO 13628-10:2006
DIN EN ISO 13628-3:2003-09 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000); German and English version EN ISO 13628-3:2000
DIN EN ISO 13628-7:2007-02 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005); English version EN ISO 13628-7:2006
DIN EN ISO 13628-6:2008-01 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006); English version EN ISO 13628-6:2006 / Note: To be replaced by DIN EN ISO 13628-6 (2011-10).

Standard Association of Australia （SAA）, Petroleum Operations Analysis

AS 2885.3:2012
AS 2885.3:2001 Pipelines - Gas and liquid petroleum - Operation and maintenance
AS 2134.2:1999 Recommended practice for chemical analysis by atomic absorption spectrometry - Graphite furnace spectrometry
AS ISO 14692.4:2022 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping, Part 4: Fabrication, installation and operation
AS 3741:1990 Recommended practice for chemical analysis by ion chromatography
AS ISO 16100.2:2004(R2015)
AS 3641.1:1999 Recommended practice for atomic emission spectrometric analysis - Principles and techniques
AS 3844:1998 Recommended practice for metal analysis by electrochemical stripping techniques

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Petroleum Operations Analysis

GB/T 30217.2-2016 Petroleum and natural gas industries—Drilling and production equipment—Part 2: Deepwater drilling riser analysis methodologies, operations and integrity
GB/T 35320-2017 Hazard and operability studies (HAZOP studies)—Application guide
GB/T 21412.5-2017 Petroleum and natural gas industries—Design and operation of subsea production systems—Part 5: Subsea umbilicals
GB/T 17923-2017 Analytical method for oily sewage from marine petroleum development industry—Infrared spectrophotometry
GB/T 21412.6-2018 Petroleum and natural gas industries—Design and operation of subsea production systems—Part 6：Subsea production control systems
GB/T 21412.15-2017 Petroleum and natural gas industries—Design and operation of subsea production systems—Part15：Subsea structures and manifolds

Tianjin Provincial Standard of the People's Republic of China, Petroleum Operations Analysis

DB12/T 732-2017 Tianjin Municipal Administrative Licensing Items Operating Procedures for Petroleum Refined Oil

VN-TCVN, Petroleum Operations Analysis

TCVN 7567-2006 Liquefied Petroleum Gas (LPG).Handling Principles, Measurement and Calculation
TCVN 7441-2004 Liquefied petroleum gas (LPG) compounds at consumption ends.Requirements in design, installation and operation
TCVN 5141-2008 Guidelines on good laboratory practice in residue analysis

American Petroleum Institute (API), Petroleum Operations Analysis

API RP 70I-2004(2012) Security for Worldwide Offshore Oil and Natural Gas Operations
API RP 51R-2009(2015) Environmental Protection for Onshore Oil and Gas Production Operations and Leases
API RP 76-2007(2013) Contractor Safety Management for Oil and Gas Drilling and Production Operations
API MPMS 4.8-2021 Manual of Petroleum Measurement Standards Chapter 4.8 Operation of Proving Systems (Third Edition)
API RP 45-1998(2012) Recommended Practice for Analysis of Oilfield Waters
API RP 55-1995(2013) Recommended Practice for Oil and Gas Producing and Gas Processing Plant Operations Involving Hydrogen Sulfide

CU-NC, Petroleum Operations Analysis

NC 33-41-1985 Oil and Oil Derivatives. LP-Gas Storage and Bottling Plants General Gperation Requirements
NC 33-42-1985 Oil and Oil Derivatives. Determination of Hydrocarbon Composition Method of Physico-Chemical Analysis
NC 90-13-33-1986 Reference Standard Samples. Sulfidic Quartz Rock AA MPR of the Composition for Chemical Analysis

American National Standards Institute （ANSI), Petroleum Operations Analysis

ANSI/AWWA C670-2009 Online Chlorine Analyzer Operation & Maintenance
ANSI/AWWA C670-2020 Online Chlorine Analyzer Operation and Maintenance
ANSI/ASTM D6300:2013 Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

British Standards Institution (BSI), Petroleum Operations Analysis

BS PD CEN ISO/TS 17969:2017 Petroleum, petrochemical and natural gas industries. Guidelines on competency management for well operations personnel
BS EN 13952:2017 Tracked Changes. LPG equipment and accessories. Filling operations for LPG cylinders
BS EN 13153:2002 Specification and testing of LPG cylinder valves - Manually operated
BS EN 13153:2002(2003) Specification and testing of LPG cylinder valves - Manually operated
BS EN ISO 7278-2:2022 Petroleum measurement systems - Pipe prover design, calibration and operation
BS EN ISO 10418:2003 Petroleum and natural gas industries. Offshore production Installations. Analysis, design, installation and testing of basic surface process safety systems
BS EN ISO 13628-5:2010 Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea umbilicals
BS EN ISO 13628-5:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea umbilicals
BS PD CEN/TR 15522-2:2006 Oil spill identification — Waterborne petroleum and petroleum products — Part 2: Analytical methodology and interpretation of results
BS EN ISO 15995:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated
BS EN ISO 13628-4:2012 Petroleum and natural gas Industries. Design and operation of subsea production systems. Subsea wellhead and tree equipment
BS EN ISO 13628-4:2010 Petroleum and natural gas Industries. Design and operation of subsea production systems. Subsea wellhead and tree equipment
BS EN 15522-2:2023 Tracked Changes. Oil spill identification. Petroleum and petroleum related products. Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses
BS EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subseaprod uction systems - Specification for bonded flexible pipe
21/30430328 DC BS EN ISO 7278-2. Petroleum measurement systems. Part 2. Pipe prover design, calibration and operation
21/30425149 DC BS EN 15522-2. Oil spill identification. Waterborne petroleum and petroleum products. Part 2. Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
15/30291972 DC BS EN ISO 14692-4. Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Part 4. Fabrication, installation and operation
BS EN ISO 13628-1:2005+A1:2010 Petroleum and natural gas industries. Design and operation of subsea production systems. Part 1: General requirements and recommendations
BS EN ISO 13628-9:2001 Petroleum and natural gas industries. Design and operation of subsea production systems. Remotely operated tool (ROT) intervention systems
BS EN ISO 13628-7:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Completion/workover riser systems
BS EN ISO 13628-9:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated tool (ROT) intervention systems
BS EN ISO 13628-6:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea production control systems
BS EN 15202:2019 LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
BS EN ISO 10417:2004 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
PD ISO/IEC TS 20748-3:2020 Information technology for learning, education and training. Learning analytics interoperability. Guidelines for data interoperability
BS EN ISO 13628-8:2002 Petroleum and natural gas industries. Design and operation of subsea production systems. Remotely operated vehicle (ROV) interfaces on subsea production systems
BS EN ISO 13628-8:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems
17/30362705 DC BS EN 15202. LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
BS EN ISO 15995:2021 Tracked Changes. Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated
BS EN ISO 16591:2011 Petroleum products. Determination of sulfur content. Oxidative microcoulometry method
BS EN ISO 16664:2004 Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
BS EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
PD ISO/TS 18101-1:2019 Automation systems and integration. Oil and gas interoperability. Overview and fundamental principles
BS EN ISO 20312:2011 Petroleum and natural gas industries. Design and operating limits of drill strings with aluminium alloy components
BS ISO 16258-2:2015 Workplace air. Analysis of respirable crystalline silica by X-ray diffraction. Method by indirect analysis
BS EN ISO 13628-3:2001 Petroleum and natural gas industries. Design and operation of subsea production systems. Through flowline (TFL) systems

International Organization for Standardization (ISO), Petroleum Operations Analysis

ISO/TS 17969:2017 Petroleum, petrochemical and natural gas industries - Guidelines on competency management for well operations personnel
ISO 10418:2003 Petroleum and natural gas industries - Offshore production installations - Analysis, design, installation and testing of basic surface process safety systems
ISO 7278-2:2022 Petroleum measurement systems — Part 2: Pipe prover design, calibration and operation
ISO 14692-4:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
ISO 13628-4:2010 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment
ISO 13628-4:1999 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment
ISO 13628-3:2000 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowtime (TFL) systems
ISO 15995:2006 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated
ISO 13628-1:2005 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations
ISO 13628-10:2005 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe
ISO 13628-5:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals
ISO 13628-5:2002 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals
ISO 13628-1:1999 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations
ISO 10418:2003/cor 1:2008 Petroleum and natural gas industries - Offshore production installations - Analysis, design, installation and testing of basic surface process safety systems; Technical Corrigendum 1
ISO 13628-9:2000 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tools (ROT) intervention systems
ISO 13628-6:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems
ISO 13628-6:2000 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems
ISO/TS 15338:2020 Surface chemical analysis — Glow discharge mass spectrometry — Operating procedures
ISO 14692-4:2002/cor 1:2006 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation; Technical Corrigendum 1
ISO 17078-4:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment
ISO 13628-7:2005 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems
ISO 14692-4:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
ISO/IEC TS 20748-3:2020 Information technology for learning, education and training — Learning analytics interoperability — Part 3: Guidelines for data interoperability
ISO 10417:2004 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
ISO 10417:1993 Petroleum and natural gas industries; subsurface safety valve systems; design, installation, operation and repair
ISO 10407:1993 Petroleum and natural gas industries; drilling and production equipment; drill stem design and operating limits
ISO 19901-6:2009/cor 1:2011 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations; Technical Corrigendum 1
ISO/CD 19901-1 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 1: Metocean design and operating considerations
ISO 16591:2010 Petroleum products - Determination of sulfur content - Oxidative microcoulometry method
ISO 13624-1:2009 Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment
ISO 13628-15:2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds
ISO 13628-2:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications
ISO 13628-4:2010/cor 1:2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment; Technical Corrigendum 1
ISO/TS 18101-1:2019 Automation systems and integration — Oil and gas interoperability — Part 1: Overview and fundamental principles

BE-NBN, Petroleum Operations Analysis

NBN 52.012-1958
NBN 52.040
NBN 52.085-1961
NBN 52.013-1955
NBN T 52-131-1985 Petroleum products - Determination of boiling range distribution -Gas chromatography method

RO-ASRO, Petroleum Operations Analysis

SR 110-6-1995 Sugar. Methods of analysls. Potential floc
STAS 8160/0-1981 CALCINATED PETROLEUM COKE General specifications for chemical analysis carrying cut

AR-IRAM, Petroleum Operations Analysis

Professional Standard-Safe Production, Petroleum Operations Analysis

AQ/T 3049-2013 Hazard and operability studies (HAZOP studies).Application guide

NZ-SNZ, Petroleum Operations Analysis

NZS/AS 2885.3-1997 Pipelines - Gas and Liquid Petroleum Part 3: Operation and Maintenance (AS 2885.3: 1997)

中国石油天然气总公司, Petroleum Operations Analysis

SY/T 6015-1994 Oil and gas display analyzer rock pyrolysis analysis method

Korean Agency for Technology and Standards (KATS), Petroleum Operations Analysis

KS B 5646-2008(2018) Automatic analysers for sulphur in crude oil and petroleum products
KS B 5646-2008 Automatic analysers for sulphur in crude oil and petroleum products
KS A IEC 61882:2006 Hazard and operability studies(HAZOP studies)－Application guide
KS M ISO 3830-2007(2012) Petroleum products－Determination of lead content of gasoline－Iodine monochloride method
KS E 3717-2015(2020) Analysis methods for contents of petroleum coke used fuel-grade
KS X ISO/IEC TS 20748-3:2022 Information technology for learning, education and training — Learning analytics interoperability — Part 3: Guidelines for data interoperability
KS B ISO 10407:2007 Petroleum and natural gas industries－Drilling and production equipment－Drill stem design and operating limits
KS B ISO 10407-2007(2022) Petroleum and natural gas industries－Drilling and production equipment－Drill stem design and operating limits
KS B ISO 10407-2007(2017) Petroleum and natural gas industries－Drilling and production equipment－Drill stem design and operating limits
KS M 2078-2013 Test method for the determination of hydrocarbons and dimethyl ether(DME) in liquefied petroleum gases(LPG) and LPG — DME mixtures by gas chromatography(GC)

AT-ON, Petroleum Operations Analysis

ONORM C 1160-1957
OENORM EN 15522-2-2021 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses

GOSTR, Petroleum Operations Analysis

GOST R 58623-2019 Trunk pipeline transport of oil and oil products. Vertical cylindrical steel tanks. Rules of technical operation
GOST R 58213-2018 Petroleum and natural gas industries. Arctic operations. Shore logistics operations

Professional Standard - Traffic, Petroleum Operations Analysis

JTJ 056-1984 Operating rules for water-quality analysis of highway engineering

American Water Works Association (AWWA), Petroleum Operations Analysis

AWWA C670-2015 Online Chlorine Analyzer Operation and Maintenance
AWWA C670-2020 Online Chlorine Analyzer Operation and Maintenance
AWWA C670-2009 Online Chlorine Analyzer Operation and Maintenance (First Edition)

Danish Standards Foundation, Petroleum Operations Analysis

DS/EN ISO 13628-9:2007 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems
DS/ISO 15995:2021 Gas cylinders – Specifications and testing of LPG cylinder valves – Manually operated
DS/CEN/TR 15522-2:2013 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
DS/EN ISO 15995:2021 Gas cylinders – Specifications and testing of LPG cylinder valves – Manually operated (ISO 15995:2021)
DS/EN ISO 20312:2012 Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components
DS/EN ISO 13628-5:2010 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals
DS/EN ISO 14692-4/AC:2007 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
DS/EN ISO 14692-4:2003 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
DS/EN ISO 10417:2004 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
DS/EN ISO 19901-1:2006 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations
DS/EN ISO 13628-10:2007 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe
DS/EN ISO 13628-1:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations
DS/EN ISO 13628-15:2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds
DS/EN ISO 13628-7:2007 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems
DS/EN ISO 13628-3:2001 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems

未注明发布机构, Petroleum Operations Analysis

BS EN ISO 13628-9:2006(2007) Petroleum and natural gas industries — Design and operation of subsea production systems — Part 9 : Remotely operated tool (ROT) intervention systems
BS EN ISO 13628-4:1999 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4 : Subseawellhead and tree equipment
BS EN ISO 10417:2004(2009) Petroleum and natural gas industries — Subsurface safety valve systems — Design, installation, operation and redress
BS EN ISO 13628-3:2001(2003) Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3 : Through flowline (TFL) systems
BS EN ISO 13628-7:2006(2007) Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7 : Completion / workover riser systems

ES-UNE, Petroleum Operations Analysis

UNE-EN ISO 13628-9:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-9:2000) (Endorsed by AENOR in March of 2007.)
UNE-CEN/TR 15522-2:2006 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results (Endorsed by AENOR in April of 2007.)
UNE-EN ISO 15995:2021 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2021)
UNE-EN ISO 7278-2:2022 Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022) (Endorsed by Asociación Española de Normalización in January of 2023.)
UNE-EN 15202:2020 LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
UNE-EN ISO 20312:2011 Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011) (Endorsed by AENOR in November of 2011.)
UNE-EN ISO 14692-4:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)
UNE-EN ISO 13628-4:2010 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:2010) (Endorsed by AENOR in February of 2011.)
UNE-EN ISO 10417:2004 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004) (Endorsed by AENOR in October of 2004.)
UNE-EN ISO 13628-5:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009) (Endorsed by AENOR in February of 2010.)
UNE-EN ISO 13628-15:2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) (Endorsed by AENOR in October of 2011.)
UNE-EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2005) (Endorsed by AENOR in January of 2007.)
UNE-EN ISO 13628-1:2005 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:2005) (Endorsed by AENOR in January of 2006.)
UNE-EN ISO 13628-3:2000 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems. (ISO 13628-3:2000) (Endorsed by AENOR in October of 2001.)
UNE-EN ISO 13628-6:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) (Endorsed by AENOR in July of 2006.)
UNE-EN ISO 13628-7:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) (Endorsed by AENOR in March of 2007.)

European Committee for Standardization (CEN), Petroleum Operations Analysis

EN ISO 13628-5:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009)
prEN 15522-2-2020 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
EN 15522-2:2023 Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses
EN ISO 15995:2021 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2021)
EN ISO 13628-1:1999 Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 1: General Requirements and Recommendations ISO 13628-1:1999
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe
EN ISO 13628-9:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems
EN ISO 17078-4:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010)
EN ISO 13628-7:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems
EN ISO 13628-3:2000 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems
EN ISO 10418:2019 Petroleum and natural gas industries - Offshore production installations - Process safety systems (ISO 10418:2019)
prEN ISO 19901-1 rev Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations
EN ISO 13628-4:2010 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (Incorporating corrigendum June 2011)
EN ISO 13628-1:2005 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:2005)
EN ISO 13628-8:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
EN 13856:2002 Minimum requirements for the content of the user manual for automotive LPG systems
EN ISO 13628-6:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control
EN ISO 16591:2010 Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010)
EN ISO 13628-1:2005/A1:2010 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations - Amendment 1: Revised Clause 6 (ISO 13628-1:2005/Amd 1:2010)
EN ISO 13624-1:2009 Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment (ISO 13624-1:2009)
EN ISO 15995:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006)

KR-KS, Petroleum Operations Analysis

KS B 5646-2008(2023) Automatic analysers for sulphur in crude oil and petroleum products
KS X ISO/IEC TS 20748-3-2022 Information technology for learning, education and training — Learning analytics interoperability — Part 3: Guidelines for data interoperability

Hebei Provincial Standard of the People's Republic of China, Petroleum Operations Analysis

DB13/T 2105-2014 Laboratory chemical analysis pipetting operating procedures
DB13/T 2104-2014 Laboratory chemical analysis titration operating procedures

CEN - European Committee for Standardization, Petroleum Operations Analysis

PD CEN/TR 15522-2:2006 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results
PREN ISO 13628-8:2010 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely operated tools and interfaces on subsea production systems
PREN ISO 13628-6:2012 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems

国家能源局, Petroleum Operations Analysis

SY/T 5777-2022 Nuclear magnetic resonance analysis method of oil and water in crude oil and rocks
SY/T 5119-2016 Analysis of soluble organic matter and crude oil components in rocks
SY/T 6915.4-2020 Oil and gas drilling equipment eccentric cylinder flow control system Part 4: Eccentric cylinder and related equipment operating procedures
SY/T 5121-2021 Infrared spectroscopic analysis method of organic matter and crude oil in rocks

ESDU - Engineering Sciences Data Unit, Petroleum Operations Analysis

SPA-M12-1-2010 Sept.09: Characterisation of petroleum fouling with respect to operational parameters: an experimental study

National Metrological Verification Regulations of the People's Republic of China, Petroleum Operations Analysis

JJG 899-1995 Verification Regulation of Analyzer of Low Water Content in Petroleum

Professional Standard - Customs, Petroleum Operations Analysis

HS/T 31-2010 Quantitative analysis of the content of the mineral oil in petroleum lubricant

Japanese Industrial Standards Committee (JISC), Petroleum Operations Analysis

JIS B 7995:1994 Automatic analysers for sulphur in crude oil and petroleum products

American Gas Association, Petroleum Operations Analysis

AGA ILPG-1996 Introduction to LPG Safety for Propane-Air Plant Operators

Taiwan Provincial Standard of the People's Republic of China, Petroleum Operations Analysis

CNS 12862-1991 Handling and use for coupling of liquefied petroleum gas
CNS 14717-2003 Method for calculation of certain physical properties of liquefied petroleum (LP) gases from compositional analysis

Lithuanian Standards Office , Petroleum Operations Analysis

LST EN ISO 13628-9:2007 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-9:2000)
LST EN ISO 14692-4:2003 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002)
LST EN ISO 20312:2012 Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011)
LST EN ISO 13628-4:2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:2010)

Beijing Provincial Standard of the People's Republic of China, Petroleum Operations Analysis

DB11/T 889.1-2012 Operating procedures for cultural relic building repair engineering part 1: tile and stone work
DB11/T 889.3-2014 Operational Regulations for Renovation of Cultural Heritage Buildings Part 3: Oil Work

Professional Standard - Commodity Inspection, Petroleum Operations Analysis

SN/T 4040-2014 Guidelines on good laboratory pratictice in reside analysis

海关总署, Petroleum Operations Analysis

HS/T 45-2014 Quantitative analysis method of mineral oil content in petroleum lubricants

ZA-SANS, Petroleum Operations Analysis

SANS 10087-4:1979 The handling, storage, and distribution of liquefied petroleum gas in domestic, commercial, and industrial installations Part 4: Transportation of LPG in bulk by road
SANS 10087-8:1976 The handling, storage, and distribution of liquefied petroleum gas in domestic, commercial, and industrial installations Part 8: The fuelling of fork lift trucks and other LP gas operated vehicles
SANS 14692-4:2009 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping Part 4: Fabrication, installation and operation
SANS 10087-6:2006 The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial, and industrial installations Part 6: The application of liquefied petroleum and compressed natural gases as engine fuels for internal combustion engine

国家市场监督管理总局、中国国家标准化管理委员会, Petroleum Operations Analysis

GB/T 21412.11-2019 Petroleum and natural gas industries—Design and operation of subsea production systems—Part 11:Recommended practice for flexible pipe
GB/T 37265-2018 Petroleum and natural gas industries－Design and operating limits of drill strings with aluminium alloy drill pipes
GB/T 21412.10-2019 Petroleum and natural gas industries—Design and operation of subsea production systems—Part 10: Specification for bonded flexible pipe

Indonesia Standards, Petroleum Operations Analysis

SNI 03-1732-1989 Thickness of flexible hardening of highways by component analysis method, Code of practice

Universal Oil Products Company (UOP), Petroleum Operations Analysis

UOP 986-2008 Arsenic in Heavy Petroleum Fractions using Microwave Digestion and Graphite Furnace-AAS
UOP 549-2009 Sodium in Petroleum Distillates by ICP-OES or AAS

Professional Standard - Petrochemical Industry, Petroleum Operations Analysis

SH/T 3174-2013 Design specification for on-line analyzer systems in petrochemical industry
SH/T 3213-2020 Guidelines for Safety Analysis of Power Supply and Distribution System in Petrochemical Enterprises
SH 3006-1999 Code for the design of control room and analyzer room for petrochemical industry

TH-TISI, Petroleum Operations Analysis

TIS 202.2-2004 Lime.part 2: standard practice for sampling and sample preparation of lime and limestone products

US-Unspecified Preparing Activity, Petroleum Operations Analysis

DI-SAFT-81841 B-2011 Operating, Support, Health, and Safety (OSH&S) Hazard Analysis Report

Fujian Provincial Standard of the People's Republic of China, Petroleum Operations Analysis

DB35/T 2016-2021 Operating rules for the analysis of benzene series in burning incense products
DB35/T 2014-2021 Operating procedures for the analysis of drugs and their metabolites in biological samples
DB35/T 2062-2022 Operating procedures for the analysis of total tritium in the ambient air around nuclear power plants

Professional Standard - Medicine, Petroleum Operations Analysis

YY/T 0188.5-1995 Operating methods for the tests and assays of drugs.Part 5:Instrumental determinations of drugs

CZ-CSN, Petroleum Operations Analysis

CSN 83 0520 Cast.27-1977 Physico-chemical analysis of drinking water Determinatíon of crude oil and oil products

EEMUA - Engineering Equipment and Materials Users Association, Petroleum Operations Analysis

PUB NO 175-2013 EEMUA Code of Practice Calibration and validation of process analysers (Edition 2)

Engineering Equipment and Materials Users Association （EEMUA), Petroleum Operations Analysis

EEMUA PUB NO 175-2013 EEMUA Code of Practice Calibration and validation of process analysers (Edition 2)

Professional Standard - Electricity, Petroleum Operations Analysis

DL/T 1886-2018 Safety operation rules for sand and gravel screening machinery in hydropower and water conservancy projects

National Metrological Technical Specifications of the People's Republic of China, Petroleum Operations Analysis

JJF 1526-2015 Calibration Specification for Petroleum Products Colorimeters & Filters

PL-PKN, Petroleum Operations Analysis

PN Z04211-02-1989 Air purity protection Tests for 1,1,1-trichloroethane, freon 11 and white spirit in mixtures Determination of 1,1,1-trichloroethane, freon 11 and- white spirit in work places by gas chromatography