ZH
RU
ES
Ester and Amino
Ester and Amino, Total:109 items.
In the international standard classification, Ester and Amino involves: Terminology (principles and coordination), Aircraft and space vehicles in general, Analytical chemistry, Construction materials, Products of the chemical industry, Paint ingredients, Plastics, Footwear, Cellular materials, Protective equipment, Products of the textile industry, Inorganic chemicals, Photography, Protection of and in buildings, Road engineering, Wood, sawlogs and sawn timber, Adhesives, Furniture, Organic chemicals, Raw materials for rubber and plastics.
(U.S.) Ford Automotive Standards, Ester and Amino
- FORD ESA-M2D213-A-2004 POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESA-M4D347-A-2005 POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2G222-A-2003 ADHESIVE, URETHANE - ONE COMPONENT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESW-M2D234-A-2004 POLYURETHANE MOLDING COMPOUND, MODIFIED- POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESW-M2D234-C-2004 POLYURETHANE MOLDING COMPOUND, MODIFIED- POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESK-M2G367-A1-2015 ADHESIVE, POLYURETHANE, TWO COMPONENT, WATER BORNE, BASE MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M2G361-A-2003 ADHESIVE, MOISTURE CURE URETHANE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2G224-A-2006 ADHESION PRIMER, GLASS, FOR ONE COMPONENT URETHANE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D243-A6-2010 POLYURETHANE (POLYETHER BASED) FOAM, FLAME BONDABLE, 24 ?26 kg/m3 density ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2G189-A-2003 ADHESIVE, URETHANE - TWO COMPONENT - ROOM TEMPERATURE CURING - STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M2G316-B-2007 ADHESIVE, FAST MOISTURE CURING URETHANE, ONE COMPONENT, HIGH VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M2G382-A-2002 ADHESIVE, URETHANE, TWO COMPONENT, HEAT CURING, PLASTIC BONDING ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M99J291-A-2005 TAPE, URETHANE, PRESSURE SENSITIVE, CHIP RESISTANT, EXTERIOR - 0.36 MM (14 MIL) NOMINAL THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D243-A7-2010 POLYURETHANE (POLYETHER BASED) FOAM, FLAME BONDABLE, 27 ?36 kg/m3 density ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2D243-A6
- FORD WSS-M2G316-B2-2007 ADHESIVE, MOISTURE CURING URETHANE, ONE COMPONENT, PRIMERLESS TO SILANE BASED CLEARCOAT PAINT, DIRECT FIRED OVENS ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2G316-B4-2008 ADHESIVE, MOISTURE CURING URETHANE, ONE COMPONENT, PRIMERLESS CLEARCOAT, INCREASED UV-STABILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M99J291-A2-2005 TAPE, URETHANE, PRESSURE SENSITIVE, CHIP RESISTANT, EXTERIOR - 0.20 MM (8 MIL) NOMINAL THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M99J291-A
- FORD WSB-M2G358-A-2003 ADHESIVE, TWO COMPONENT, URETHANE, WATER BASE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M5H21-A-1995 FABRIC, POLYESTER, NONWOVEN, EMBOSSED, URETHANE COATED
- FORD ESB-M99J291-A3-2005 TAPE, URETHANE, PRESSURE SENSITIVE, CHIP RESISTANT, NON-VISIBLE APPLICATIONS - 0.36 MM (14 MIL) NOMINAL THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M99J291-A
- FORD ESB-M99J291-A4-2005 TAPE, URETHANE, PRESSURE SENSITIVE, CHIP RESISTANT, NON-VISIBLE APPLICATIONS - 0.20 MM (8 MIL) NOMINAL THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M99J291-A
- FORD ESW-M2D234-A-2010 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESW-M2D234-C-2010 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESK-M62J32-A-1994 PRIMER SURFACER, WATER BASED PU-MODIFIED, COLOURED
- FORD WSK-M2G322-B1-2015 ADHESIVE, POLYURETHANE, TWO COMPONENT, SOLVENT BORNE, BASE MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2G316-B5-2009 ADHESIVE, MOISTURE CURING URETHANE, ONE COMPONENT, PRIMERLESS CLEARCOAT PAINT, STANDARD FIX, PUMPABLE, AMBIENT APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M9H101-A-2000 FABRIC, BACKING - NON-WOVEN POLYESTER FIBER/URETHANE FOAM
- FORD WSB-M4G340-A-2014 SEALER, URETHANE BASED, HEAT CURING, PAINTABLE, ANTI-CRACKING ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2G190-A-2003 PRIMER, ADHESION - URETHANE STRUCTURAL ADHESIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M6J123-C-2008 PRIMER SURFACER, MICROCELLULAR URETHANE ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M9H95-A-2000 FABRIC, BACKING - NONWOVEN POLYESTER FIBER/URETHANE FOAM
- FORD ESF-M4G321-A-1990 SEALANT, URETHANE, TWO COMPONENT, ROOM TEMPERATURE CURING
- FORD ESK-M2G367-A1-1992 ADHESIVE, POLYURETHANE, TWO COMPONENT, WATER BORNE, BASE MATERIAL
- FORD ESA-M2D287-A-2004 POLYURETHANE ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M2G377-A1-2003 ADHESION PROMOTER, POLYURETHANE ***TO BE USED WITH FORD WSS=M99P1111-A***
- FORD ESA-M2D213-A-2009 POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESA-M4D347-A-2009 POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4G340-A-1991 SEALER, URETHANE BASED, HEAT CURING, PAINTABLE, ANTI-CRACKING
- FORD WSS-M5D21-A-2006 ISOCYANATE FOR PUR FOAM, MOLDED ***TO USED WITH FORD WSS-M99P1111-A***
Japanese Industrial Standards Committee (JISC), Ester and Amino
Group Standards of the People's Republic of China, Ester and Amino
Military Standards (MIL-STD), Ester and Amino
GM Holden Ltd, Ester and Amino
ZA-SANS, Ester and Amino
- SANS 1383:1983 Rigid urethane and isocyanurate foams for use in thermal insulation
- SANS 1383:2008 Rigid urethane and isocyanurate foams for use in thermal insulation
- SANS 1349:2006 Phenolic, aminoplastic and one-part polyurethane resin adhesives for the laminating and finger-jointing of timber, and for furniture and joinery
- SANS 1077:2009 Sealing compounds for the building and construction industry, two-component, polyurethane-base
Professional Standard - Chemical Industry, Ester and Amino
- HG/T 2409-1992 Determination of isoamyl ester group content in polyurethane prepolymer
- HG/T 5845～5848-2021 N-ethyl para-ester [4-N-ethylaminophenyl (β-hydroxyethyl sulfone sulfate)], N-ethyl meta-ester [3-N-ethylaminophenyl (β-ethyl sulfone], acetylated amino oil [4-amino-N-[3-(ethylhydroxyethyl)sulfone]phenylbenzamide] and 2,4-dimethylacetoacetanilide (2021)
- HG/T 5303～5305-2018 Photosensitive materials Polytetramethylene glycol 250-bis(4-benzoylphenoxyacetic acid) ester, 4-(dimethylamino)benzoic acid-(2-ethyl)hexyl ester and 4-dimethylaminobenzoic acid ethyl ester ( 2018)
- HG/T 5803～5806-2021 Plexiglass recycled methyl methacrylate, D-p-hydroxyphenylglycine, D-dihydrophenylglycine methyl Deng sodium salt and tert-butyl acetoacetate for industrial use (2021)
Professional Standard - Light Industry, Ester and Amino
工业和信息化部, Ester and Amino
- HG/T 5846-2021 N-ethyl meta ester [3-N-ethylaminophenyl (β-ethyl sulfate) sulfone]
- HG/T 5845-2021 N-ethyl para ester [4-N-ethylaminophenyl (β-hydroxyethyl sulfone sulfate)]
- YS/T 1215-2018 N-allyl-O-isobutylthiocarbamate
- HG/T 5304-2018 Photosensitive material 4-(dimethylamino)-benzoic acid-(2-ethyl)hexyl ester
- HG/T 5305-2018 Photosensitive material 4-dimethylaminoethyl benzoate
- QB/T 5105-2017 Cosmetic raw material iodopropynol butylcarbamate
Korean Agency for Technology and Standards (KATS), Ester and Amino
British Standards Institution (BSI), Ester and Amino
- BS ISO 16365-3:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Distinction between ether and ester polyurethanes by determination of the ester group content
未注明发布机构, Ester and Amino
Association Francaise de Normalisation, Ester and Amino
- NF T52-113:1985 Plastics. Basic materials for polyurethanes. Polyesters. Determination of the hydroxyl value.
- NF T52-115:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of water.
- NF T52-111:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of the density.
- NF T52-112:1985 Plastics. Basics materiels for polyurethanes. Polyethers. Determination of the hydroxyl value.
International Organization for Standardization (ISO), Ester and Amino
- ISO 16365-3:2014 Plastics - Thermoplastic polyurethanes for moulding and extrusion - Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content
- ISO 14900:2001/Cor 1:2005 Plastics - Polyols for use in the production of polyurethane - Determination of hydroxyl number; Technical Corrigendum 1
American Society for Testing and Materials (ASTM), Ester and Amino
- ASTM D3851-97(2003)e1 Standard Specification for Urethane Microcellular Shoe Soling Materials
- ASTM D3851-97 Standard Specification for Urethane Microcellular Shoe Soling Materials
- ASTM D2572-97 Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
- ASTM D2572-19 Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
- ASTM D5932-08 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
- ASTM D5629-05 Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
- ASTM D5629-99 Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
- ASTM D2572-97(2010) Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
Indonesia Standards, Ester and Amino
RU-GOST R, Ester and Amino
CZ-CSN, Ester and Amino
- CSN 64 0354-1982 Polyurethane products polyethers nd polyesters raw materials. Deter- ination of hydroxyl number
GM Daewoo, Ester and Amino
- GMKOREA EDS-M-6707-2012 Polyurethane Foam Laminated with Woven or Knitted Fabric ?? ?? ??? ??? ????? ? Version 4; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW15058 [Replaced: GMKOREA EDS-M-6
American National Standards Institute （ANSI), Ester and Amino
- ANSI/ASTM D5629:1999 Test Method for Polyurethane Raw Materials: Determination of Acidity in Low Acidity Aromatic Isocyanates and Polyurethane Prepolymers (08.03)
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Ester and Amino
- GB/T 35453-2017 Rigid polyurethane foam board for frozen soil subgrade (DLPU)
The Society for Protective Coatings (SSPC), Ester and Amino
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ester and Amino
- GB/T 35453-2017(英文版) Rigid polyurethane foam board for frozen soil subgrade (DLPU)
- GB 29944-2013 Food Additive N-[N-(3,3-Dimethylbutyl)]-L-α-Aspartic Acid-L-Phenylalanine 1-Methyl Ester (Neutame)
Anhui Provincial Standard of the People's Republic of China, Ester and Amino
Association of Official Analytical Chemists (AOAC), Ester and Amino
General Motors Corporation (GM), Ester and Amino
SSPC - The Society for Protective Coatings, Ester and Amino
- PS 28.02-2010 Three-Coat Moisture-Cured Polyurethane Coating System@ Performance-Based