ZH
RU
ES
temperature analysis
temperature analysis, Total:498 items.
In the international standard classification, temperature analysis involves: Plastics, Environmental protection, Thermodynamics and temperature measurements, Nuclear energy engineering, Products of the textile industry, Rubber and plastics products, Paints and varnishes, Materials for the reinforcement of composites, Integrated circuits. Microelectronics, Environmental testing, Analytical chemistry, Aids for disabled or handicapped persons, Electrical and electronic testing, Protection against fire, Products of the chemical industry, Medical equipment, Non-ferrous metals, Fertilizers, Metalliferous minerals, Reinforced plastics, Sensory analysis, Particle size analysis. Sieving, Glass, Testing of metals, Plant and equipment for the food industry, Fluid storage devices, Pesticides and other agrochemicals, Measurement of volume, mass, density, viscosity, Ceramics, Sugar. Sugar products. Starch, Refrigerating technology, Water quality, Measurement of fluid flow, Lighting, Packaging and distribution of goods in general, Farming and forestry, Fuels, Electricity. Magnetism. Electrical and magnetic measurements, Solar energy engineering, Lubricants, industrial oils and related products, Tea. Coffee. Cocoa, Coals, Cutting tools, Conducting materials, Heat treatment, Electrical wires and cables, Physics. Chemistry, Shop fittings, Vocabularies, Electrical equipment for working in special conditions, Milk and milk products, Adhesives, General methods of tests and analysis for food products, On-board equipment and instruments, Printed circuits and boards, Wood-based panels, Shipbuilding and marine structures in general, Installations in buildings, Soil quality. Pedology, Magnetic materials, Protection against dangerous goods, Inorganic chemicals, Optics and optical measurements.
British Standards Institution (BSI), temperature analysis
- BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Temperature wave analysis method
- BS ISO 11359-3:2002 Plastics - Thermomechanical analysis (TMA) - Determination of penetration temperature
- BS ISO 11359-2:1999 Plastics - Thermomechanical analysis (TMA) - Determination of coefficient of linear thermal expansion and glass transition temperature
- BS EN 61207-6:2015 Tracked Changes. Expression of performance of gas analyzers. Photometric analyzers
- BS ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
- BS ISO 11359-3:2019 Tracked Changes. Plastics. Thermomechanical analysis (TMA). Determination of penetration temperature
- BS ISO 19229:2015 Gas analysis. Purity analysis and the treatment of purity data
- 22/30454351 DC BS EN 13485. Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
- BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
- BS ISO 13322-2:2006 Particle size analysis - Image analysis methods - Dynamic image analysis methods
- BS ISO 11359-2:2021 Tracked Changes. Plastics. Thermomechanical analysis (TMA). Determination of coefficient of linear thermal expansion and glass transition temperature
- BS EN ISO 21028-2:2018 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature - Temperatures between -80 degrees C and -20 degrees C
- 20/30379723 DC BS ISO 23381. Determination of Salt Out (Crystallization) Temperature of Liquid Fertilizers
- BS ISO 13322-1:2005 Particle size analysis - Image analysis methods - Static image analysis methods
- BS ISO 13322-1:2014 Particle size analysis. Image analysis methods. Static image analysis methods
- 20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
- BS 7908:1999 Packaging - Temperature and time-temperature indicators - Performance specification and reference testing
- BS ISO 15900:2009 Determination of particle size distribution - Differential electrical mobility analysis for aerosol particles
- BS ISO 19229:2019 Tracked Changes. Gas analysis. Purity analysis and the treatment of purity data
- BS ISO 728:2021 Coke. Size analysis by sieving
- BS ISO 6344-1:1998 Coated abrasives. Grain size analysis. Grain size distribution test
- BS 2782-7 Method 740C:1996 Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
- BS ISO 8196-1:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Analytical attributes of alternative methods
- BS ISO 13322-2:2021 Tracked Changes. Particle size analysis. Image analysis methods. Dynamic image analysis methods
- BS 1041-2.2:1989 Code for temperature measurement - Expansion thermometers - Guide to selection and use of dial-type expansion thermometers
- BS 1041-2.2:1990 Code for temperature measurement. Expansion thermometers. Guide to selection and use of dial-type expansion thermometers
- BS 6404-20:1996 Magnetic materials - Resistance and temperature classification of insulation coatings
AT-ON, temperature analysis
Professional Standard - Geology, temperature analysis
- DZ/T 0064.3-2021 Groundwater Quality Analysis Methods Part 3: Determination of Temperature Thermometer (Pyrometer) Method
WRC - Welding Research Council, temperature analysis
American Welding Society (AWS), temperature analysis
- WRC 510:2006 Analysis of the Effects of Temperature on Bolted Joints
- WRC 575:2019 Revisiting the Bree Diagram: Derivation with Temperature Dependent Properties
- WRC 564:2020 The MPC Lot-Centered Analysis Method for Determining High Temperature Strength Parameters
Professional Standard - Railway, temperature analysis
American National Standards Institute （ANSI), temperature analysis
American Society for Testing and Materials (ASTM), temperature analysis
- ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
- ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E2038-99 Standard Test Method for Temperature Calibration of Dielectric Analyzers
- ASTM E2038-99(2004) Standard Test Method for Temperature Calibration of Dielectric Analyzers
- ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1363-03 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- ASTM E1363-18 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-23 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1867-97 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E1867-01 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E1867-18 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E2347-11 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E1867-22 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E1867-16 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM F2004-17 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM F2004-16 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
- ASTM E1867-06 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM D3450-00(2010) Standard Test Method for Washability Properties of Interior Architectural Coatings
- ASTM E1867-11 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E1867-13 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E1867-12 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E1545-11 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM E1545-00 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM E794-06 Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
- ASTM E794-01 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
- ASTM E1545-05 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM F2004-05(2010) Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM D3418-82(1988)e1 Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis
- ASTM E794-98 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
- ASTM E2995-15a(2020) Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
- ASTM E794-06(2018) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
- ASTM E1824-08 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis
- ASTM E794-06(2012) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
- ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1824-02 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
- ASTM E1824-96 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
- ASTM E1640-13(2018) Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM E1640-18 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM E1640-13 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM F2004-05 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM E2347-05 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E2347-04 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E1640-04 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM F2004-00 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM D5540-94a(1999) Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM F2004-03 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM E2347-16 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E2347-21 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E1640-09 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM D5540-94a(2003) Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM D5540-08 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM E1545-22 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM E1545-11(2016) Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM D5133-01 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-13 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
- ASTM E1640-99 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1824-18 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM E1824-19 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1640-23 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E1824-13 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM E1824-09 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM E1824-09e1 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM E3301-22 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
- ASTM D5540-13(2021) Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM D5540-13 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM D4178-82(2005) Standard Practice for Calibrating Moisture Analyzers
API - American Petroleum Institute, temperature analysis
Professional Standard - Nuclear Industry, temperature analysis
- EJ/T 924-1995 Transient Analysis of Light Water Reactor Compartment Pressure and Temperature
- EJ/T 1013-1996 Transient Analysis of Light Water Reactor Containment Pressure and Temperature
European Committee for Standardization (CEN), temperature analysis
- PD CEN/TR 16422:2012 Classification of thermoregulatory properties
- prEN ISO 21028-1 rev Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
- EN 12830:2018 Temperature recorders for the transport@ storage and distribution of temperature sensitive goods - Tests@ performance@ suitability
- EN 12470-5:2003 Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device)
- EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
- EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
- EN 12470-2:2000+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
- EN 12470-4:2000 Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement Incorporates Amendment A1: 2009
ANS - American Nuclear Society, temperature analysis
- 56.10-1982 Subcompartment Pressure and Temperature Transient Analysis in Light Water Reactors
- 56.4-1983 Pressure and Temperature Transient Analysis for Light Water Reactor Containments
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., temperature analysis
- ASHRAE 3752-1994 Design Sensitivity Analysis for Optimal Temperature Control of a Radiant Electric Slab
- ASHRAE 3823-1994 Unsteady-State Thermal Analysis of a Large Space with Vertical Temperature Distribution
- ASHRAE PH-97-6-3-1997 Investigations of the EPA Refrigerator Analysis (ERA) Software: Compressor Map and Ambient Temperature Effects
- ASHRAE QC-06-008-2006 Transient Temperature Measurements and Characteristics for Temperature Sensors and Energy Wheels
- ASHRAE AT-01-5-1-2001 Night Ventilation Cooling of Office Buildings: Parametric Analyses of Conceptual Energy Impacts
- ASHRAE 4216-1998 Identification of Mixing Effects in Stratified Chilled-Water Storage Tanks by Analysis of Time Series Temperature Data
Korean Agency for Technology and Standards (KATS), temperature analysis
- KS M 3005-2002(2022) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
- KS M 3005-2002(2017) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
- KS A 7260-2021 An emotion evaluation method based on skin temperature analysis
- KS M ISO 11359-3:2008 Plastics－Thermomechanical analysis(TMA)－Part 3：Determination of penetration temperature
- KS M ISO 11359-3-2008(2018) Plastics－Thermomechanical analysis(TMA)－Part 3：Determination of penetration temperature
- KS C IEC 61207-6-2014(2019) Expression of performance of gas analyzers — Part 6: Photometric analyzers
- KS C 0076-1990 Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
- KS E ISO 6606-2003(2019)
- KS M ISO 11359-2:2002 Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass transition temperature
- KS M ISO 11359-2-2002(2017) Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass transition temperature
- KS M ISO 11359-2-2002(2022) Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass transition temperature
- KS Q ISO 3972:2003 Sensory analysis-Methodology-Method of investigating sensitivity of taste
- KS Q ISO 3972:2014 Sensory analysis — Methodology — Method of investigating sensitivity of taste
- KS I ISO 19229-2017(2022) Gas analysis — Purity analysis and the treatment of purity data
- KS B ISO 21028-1:2006 Cryogenic vessels-Toughness requirements for material at cryogenic temperature-Part 1:Temperatures below-80 ℃
- KS B ISO 21028-2:2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
- KS B ISO 21028-1:2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
- KS I ISO 19229:2017 Gas analysis — Purity analysis and the treatment of purity data
- KS B ISO 21028-1-2017(2022) Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
- KS L 1560-2010 Porcelain combustion boats for chemical analysis
- KS B ISO 21028-2-2006(2016) Cryogenic vessels－Toughness requirements for materials at cryogenic temperature－Part 2：Temperatures between －80 ℃ and －20℃
- KS C 0076-1990(2017) Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
- KS H ISO 11286-2007(2012) Tea－Classification of grades by particle size analysis
- KS E ISO 728:2022 Coke — Size analysis by sieving
- KS B ISO 21028-2:2006 Cryogenic vessels-Toughness requirements for materials at cryogenic temperature-Part 2:Temperatures between -80 ℃ and -20℃
- KS C IEC 60079-4-2007(2017) Explosive atmospheres－Part 4：Method of test for ignition temperature
- KS C IEC 60079-4-2007(2022) Explosive atmospheres－Part 4：Method of test for ignition temperature
- KS K ISO 105-E14:2018 Textiles — Tests for colour fastness — Part E14: Colour fastness to acid-felting: Mild
- KS M ISO 19212:2010 dhesives--Determination of temperature dependence of shear strength
- KS M ISO 19212-2014(2019) Adhesives — Determination of temperature dependence of shear strength
- KS M ISO 19212:2014 Adhesives — Determination of temperature dependence of shear strength
- KS K 0757-2011 Test method for effects of temperature on stability of geotextiles
- KS M ISO 974:2022 Plastics — Determination of the brittleness temperature by impact
- KS V ISO 15016-2005(2020) Guidelines for the assessment of speed and power performance by analysis of speed trial data
- KS K ISO 7211-6:2019 Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric
- KS H ISO 7532:2002 Instant coffee－Size analysis
- KS H ISO 7532:2007 Instant coffee－Size analysis
CZ-CSN, temperature analysis
Association Francaise de Normalisation, temperature analysis
- NF T30-603:1978 Paints. Fillers for interior use. Differential thermal analysis.
- NF EN ISO 11357-6:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 6 : détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique)
- NF EN 61207-6:2015 Expression des performances des analyseurs de gaz - Partie 6 : analyseurs photométriques
- NF T70-302:1995 Energetic materials for defense. Physical-chemical analysis and properties. Tnt solidifcation temperature. Automatized method.
- NF ISO 24087:2023 Caoutchouc vulcanisé - Détermination de la température de transition vitreuse et de l'enthalpie par analyse calorimétrique différentielle
- NF C46-251-6*NF EN 61207-6:2015 Expression of performance of gas analyzers - Part 6 : photometric analyzers
- NF C46-256:1994 Expression of performance of gas analysers. Part 6 : photometric analyzers.
- NF U42-681:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
- NF ISO 21870:2005 Ingrédients de mélange du caoutchouc - Noir de carbone - Détermination de la perte à la chaleur à haute température par thermogravimétrie
- NF X20-104:2015 Gas analysis - Purity analysis and the treatment of purity data
- NF ISO 19229:2019 Analyse des gaz - Analyse de pureté et traitement des données de pureté
- NF EN ISO 21028-1:2016 Récipients cryogéniques - Exigences de ténacité pour les matériaux à température cryogénique - Partie 1 : températures inférieures à - 80 oC
- NF X20-104*NF ISO 19229:2019 Gas analysis - Purity analysis and the treatment of purity data
- NF EN 12830:2018 Enregistreurs de température pour le transport, le stockage et la distribution des marchandises thermosensibles - Essais, performance, aptitude à l'emploi
- NF EN ISO 22007-3:2012 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 3 : méthode par analyse de l'oscillation de la température
- NF E86-506-1*NF EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1 : temperatures below - 80 oC
- NF EN ISO 21028-2:2018 Récipients cryogéniques - Exigences de ténacité pour les matériaux à température cryogénique - Partie 2 : températures comprises entre -80 oC et -20 oC
- NF EN 12470-2+A1:2009 Thermomètres médicaux - Partie 2 : thermomètres à changement de phase (matrice à points)
- NF EN 12470-2/IN1:2009 Thermomètres médicaux - Partie 2 : thermomètres à changement de phase (matrice à points)
- NF M03-021:1967 Analyse granulométrique du coke
- NF E18-010:1986 Industrial thermometers. Steam-pressure or liquid expansion metallic indicator thermometers. Characteristics.
- NF X11-681:1982 Particle size analysis. Particle size analysis by gravity sedimentation. Pipette method.
- NF T51-227-3*NF EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3 : temperature wave analysis method
- NF EN ISO 11357-3:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 3 : détermination de la température et de l'enthalpie de fusion et de cristallisation
- NF C31-888-10*NF EN 61788-10:2006 Superconductivity - Part 10 : critical temperature measurement - Critical temperature of composite superconductors by a resistance method
- NF E18-100:2013 Time-temperature indicators and integrators - Tests and performance
- NF E18-150*NF EN 12830:2018 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
- NF X11-630:2001 Particle size analysis - Vocabulary.
- NF E86-506-2*NF EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2 : temperatures between -80 oC and -20 oC
- NF E86-506-2:2001 Cryogenic vessels - Materials - Part 2 : toughness requirements for temperatures between -80 oC and -20 oC.
- NF T30-053-5:2007 Paints and varnishes - Determination of resistance to liquids - Part 5 : temperature-gradient oven method.
- NF V05-223:1986 Instant coffee. Size analysis.
International Organization for Standardization (ISO), temperature analysis
- ISO 7111:1987 Plastics; Thermogravimetry of polymers; Temperature scanning method
- ISO 11359-3:2002 Plastics - Thermomechanical analysis (TMA) - Part 3: Determination of penetration temperature
- ISO 11359-3:2019 Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
- ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
- ISO 11359-2:1999 Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
- ISO 11359-2:2021 Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
- ISO 3972:2011 Sensory analysis - Methodology - Method of investigating sensitivity of taste
- ISO 19229:2015 Gas analysis - Purity analysis and the treatment of purity data
- ISO 19229:2019 Gas analysis — Purity analysis and the treatment of purity data
- ISO 21028-2:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between - 80 °C and - 20 °C
- ISO 21028-1:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C
- ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
- ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C
- ISO/CD 21028-1:2011 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C
- ISO/TR 15969:2021 Surface chemical analysis — Depth profiling — Measurement of sputtered depth
- ISO 1953:1972 Hard coals; Size analysis
- ISO 13322-1:2004 Particle size analysis - Image analysis methods - Part 1: Static image analysis methods
- ISO 13322-2:2006 Particle size analysis - Image analysis methods - Part 2: Dynamic image analysis methods
- ISO 13322-1:2014 Particle size analysis - Image analysis methods - Part 1: Static image analysis methods
- ISO/DIS 1953:2022 Hard coal — Size analysis by sieving
- ISO 22007-3:2008 Plastics — Determination of thermal
conductivity and thermal diffusivity —
Part 3:
Temperature wave analysis method
- ISO 13322-2:2021 Particle size analysis — Image analysis methods — Part 2: Dynamic image analysis methods
- ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 7532:1985 Instant coffee - Size analysis
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, temperature analysis
- GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
- GB/T 11606.5-1989 The method of environmental test for analytical instruments--Change of temperature test
- GB/T 18403.6-2013 Expression of performance of gas analyzers.Part 6:Photometric analyzers
- GB/T 11998-1989 Determination of glass transition temperature of plastics--Thermomechanical analysis
- GB/T 29174-2012 Thermal analysis test method for constant-temperature stability of materials
- GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
- GB/T 38521-2020 Gas analysis—Purity analysis and the treatment of purity data
- GB/T 42348-2023 Particle Size Analysis Particle Tracking Analysis (PTA)
- GB/T 6609.27-2004 Chemical analysis methods and determination of physical performance of alumina Particle size analysis-Sieving method
- GB/T 42919.3-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 3: Temperature wave analysis
- GB/T 21649.1-2008 Particle size analysis.Image analysis methods.Part 1: Static image analysis method
- GB/T 1425-1996 Determination of melting temperature range for precious metals and their alloys--Testing method of thermal analysis
- GB/T 29557-2013 Surface chemical analysis.Depth Profiling.Measurment of sputtered depth
- GB/T 30103.1-2013 Methods of testing for thermal performance on cold store.Part 1: Temperature and humidity testing
- GB/T 6609.27-2023 Methods of chemical analysis and determination of physical properties of alumina Part 27: Particle size analysis and sieving method
- GB/T 6609.27-2009 Chemical analysis methods and determination of physical performance of alumina.Part 27:Partical size analysis.Method using electriformed sieves
- GB/T 29025-2012 Determination of particle size distributions.Electrical sensing zone method
- GB/T 9343-2008 Test method for flammability of plastics.Determination of flash-ignition temperature and self-ignition temperature
- GB/T 31536-2015 Analytical method of chemical composition for copper series arsenic removal agent at room temperature
- GB/T 21780-2008 ParticaI size analysis.Sedimentation analysis in the gravitational field.Pipette method
German Institute for Standardization, temperature analysis
- DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
- DIN EN 61207-6:1995 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994
- DIN EN 61207-6:2016-03 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015 / Note: DIN EN 61207-6 (1995-02) remains valid alongside this standard until 2017-12-30.
- DIN EN 13485:2022-08 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability; German and English version prEN 13485:2022 / Note: Date of issue 2022-07-15*Int...
- DIN 66165-2:1987 Particle size analysis; sieve analysis; procedure
- DIN 66111:1989 Particle size analysis; sedimentation analysis; principles
- DIN 66111:1989-02 Particle size analysis; sedimentation analysis; principles
- DIN 66118:1984 Particle size analysis; size analysis by air classification; fundamentals
- DIN 10751-1:2010 Analysis of honey - Determination of hydroxymethylfurfural - Part 1: Winkler photometric method
- DIN 10751-1:2021-06 Analysis of honey - Determination of content of hydroxymethylfurfural - Part 1: Winkler photometric method
- DIN 66165-2:2016 Particle size analysis - Sieving analysis - Part 2: Procedure
- DIN 66165-2:2016-08 Particle size analysis - Sieving analysis - Part 2: Procedure
- DIN EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
- DIN 66165-1:1987 Particle size analysis; sieve analysis; general principles
- DIN 66119:2016-10 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
- DIN EN ISO 21028-2:2018-07 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018); German version EN ISO 21028-2:2018
- DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
- DIN 58960-3:1988 Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers
- DIN EN 12470-2:2009-11 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers; German version EN 12470-2:2000+A1:2009 / Note: DIN EN 12470-2 (2001-02) remains valid alongside this standard until 2010-03-21.
- DIN 66165-1:2022 Particle size analysis - Sieving analysis - Part 1: Fundamentals
- DIN 66165-1:2022-06 Particle size analysis - Sieving analysis - Part 1: Fundamentals
- DIN 17052-1:2013-09 Heat treatment furnaces - Part 1: Requirements for temperature uniformity
- DIN CEN/TR 16422:2013 Classification of thermoregulatory properties; German version CEN/TR 16422:2012
- DIN 66165-1:2016 Particle size analysis - Sieving analysis - Part 1: Fundamentals
- DIN EN 1252-1:1998 Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below - 80°C; German version EN 1252-1:1998
- DIN 66120:1983 Particle size analysis; size analysis by air classification with centrifugal counterflow classifier
- DIN 66120:2016 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
- DIN EN ISO 21028-1:2017-01 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016); German version EN ISO 21028-1:2016
- DIN EN 12830:2018 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
- DIN 10751-1:1992 Analysis of honey; determination of hydroxymethylfurfural; Winkler photometric method
- DIN ISO 718:1993 Laboratory glassware; thermal shock and thermal shock endurance; test methods; identical with ISO 718:1990
- DIN 66119:2016 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
- DIN 66119:1983 Particle size analysis; size analysis by air classification with gravitation-counterflow elutriator
- DIN 66115:1983-02 Particle size analysis; sedimentation analysis in the gravitational field; pipette method
- DIN 66116-1:1973-11 Particle size analysis; sedimentation analysis in the gravitational field, sedimentation balance
- DIN EN 12830:2018-10 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability; German version EN 12830:2018
- DIN 66120:2016-10 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
- DIN EN 13486:2022-08 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification; German and English version prEN 13486:2022 / Note: Date of issu...
- DIN EN 61207-6:2016 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015
Group Standards of the People's Republic of China, temperature analysis
- T/CSTM 00537-2021 Phase transition temperature measurement of micro-nano thin film -Optical power analysis
- T/CSTM 00961-2022 Chemical composition quantitative analytical methods - General rules for evaluation of accuracy （trueness and precision）compliance
- T/JLA 005-2023 Performance evaluation method for the surface temperature source
- T/WHAS 0004-2020 High Precision Color Analyzer
International Electrotechnical Commission (IEC), temperature analysis
- IEC 61207-6:2014 Expression of Performance of Gas Analyzers - Part 6: Photometric analyzers
- IEC 61207-6:1994 Expression of performance of gas analyzers; part 6: photometric analyzers
- IEC 65B/622/DTS:2007 IEC 62492-1: Radiation thermometers - Part 1: Specifications for radiation thermometers
- IEC 60737:2010 Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary cooling circuit) - Characteristics and test methods
- IEC 61788-10:2006 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
- IEC 62059-31-1:2008/COR1:2008 Electricity metering equipment - Dependability - Part 31-1: Accelerated reliability testing - Elevated temperature and humidity
- IEC 62059-31-1:2008 Electricity metering equipment - Dependability - Part 31-1: Accelerated reliability testing - Elevated temperature and humidity
- IEC 60068-3-6:2018 RLV Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers
CENELEC - European Committee for Electrotechnical Standardization, temperature analysis
- EN 61207-6:1994 Expression of Performance of Gas Analyzers Part 6: Photometric Analyzers
- EN 61788-10:2002 Superconductivity Part 10: Critical temperature measurement - Critical temperature of Nb-Ti@ Nb3Sn@ and Bi-system oxide composite superconductors by a resistance method
ES-UNE, temperature analysis
- UNE-EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers (Endorsed by AENOR in February of 2015.)
- UNE-EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
PL-PKN, temperature analysis
- PN C89431-1993 Plastics. Thermogravimetry of polymers. Temperature scanning method
- PN M53854-00-1992 Electric thermometers Thermometric characteristics for thermocouples Classification and designations of thermocouples
- PN H04300-1987 Steel etermination of nil-dictility emperature
- PN A75052-10-1990 Fruits, vegetables and vegetable meat products Methods of microbiological analyses Enumeration and determination of titre of anaerobic sporeforming bacterias, mesophilic and thermophilic
- PN C89415-1990 Plastics A?ueous dispersions of polymers and copolymers Determination of white point temperatur? and minimum film-forming temperatur?
Professional Standard - Aviation, temperature analysis
- HB 6623.1-1992 Method for Determination of β Transition Temperature of Titanium Alloy Differential Thermal Analysis
- HB 5220.35-1995 Method for Chemical Analysis of Superalloys-Pyrogallic Acid Absorption Spectrophotometry for Determination of Tantalum Content
- HB 5220.35-2008 Methods for chemical analysis of superalloys. Part 35: Determination of tantalum content by pyrogallic acid photometric method
- HB 5220.10-1995 Method for Chemical Analysis of Superalloys Silicon Molybdenum Blue Absorption Spectrophotometry for Determination of Silicon Content
- HB 5220.44-1995 Method for chemical analysis of superalloys Distillation and separation-Molybdenum blue absorptiophotometry for determination of arsenic content
- HB 5220.13-1995 Method for chemical analysis of superalloys Potassium periodate absorptiometry for determination of manganese content
- HB 5220.20-1995 Chemical Analysis Method of Superalloys Chromoazurin S Absorption Spectrophotometry Determination of Aluminum Content
- HB 5220.22-1995 Determination of molybdenum content by thiocyanate absorptiophotometry for chemical analysis of superalloys
- HB 5220.24-1995 Method for chemical analysis of superalloys Diacetyl-oxime absorptiometry for determination of nickel content
- HB 5220.4-1995 Chemical Analysis Methods of Superalloys - Determination of Sulfur Content by Reduction Distillation Absorbance Photometry
- HB 5220.42-1995 Determination of Cerium Content by DBC-Arsenazo Absorption Spectrophotometry Method for Chemical Analysis of Superalloys
- HB 5220.30-1995 Superalloy chemical analysis method o-phenanthroline absorptiophotometry determination of iron content
- HB 5220.32-1995 Method for chemical analysis of superalloys-thiocyanate absorptiometry for determination of tungsten content
- HB 5220.43-1995 Determination of Lanthanum Content by DBC-Arsenazo Absorption Spectrophotometry Method for Chemical Analysis of Superalloys
- HB 5220.10-2008 Methods for chemical analysis of superalloys. Part 10: Determination of silicon content by silicon molybdenum blue photometric method
- HB 5220.26-1995 Determination of Cobalt Content by Nitroso R Salt Absorption Spectrophotometry Method for Chemical Analysis of Superalloys
- HB 5220.46-1995 Determination of bismuth content by semi-xylenol orange absorptiophotometry method for chemical analysis of superalloys
- HB 5220.34-1995 Chlorosulfonol C absorptiophotometric method for chemical analysis of superalloys Determination of niobium content
- HB 5220.4-2008 Methods for chemical analysis of superalloys.Part 4: Determination of sulfur content by reducing distillation photometric method
- HB 5220.13-2008 Methods for chemical analysis of superalloys. Part 13: Determination of manganese content by potassium periodate photometric method
- HB 5220.20-2008 Methods for chemical analysis of superalloys. Part 20: Determination of aluminum content by chrome azurol S photometric method
- HB 5220.22-2008 Methods for chemical analysis of superalloys. Part 22: Determination of molybdenum content by thiocyanate photometric method
- HB 5220.24-2008 Methods for chemical analysis of superalloys. Part 24: Determination of nickel content by dimethylglyoxime photometric method
- HB 5220.30-2008 Methods for chemical analysis of superalloys. Part 30: Determination of iron content by phenanthroline photometric method
- HB 5220.32-2008 Methods for chemical analysis of superalloys. Part 32: Determination of tungsten content by thiocyanate photometric method
- HB 5220.42-2008 Methods for chemical analysis of superalloys. Part 42: Determination of cerium content by DBC-arsenazo photometric method
- HB 5220.43-2008 Methods for chemical analysis of superalloys. Part 43: Determination of lanthanum content by DBC-arsenazo photometric method
- HB 5220.38-1995 Extraction and Separation by Chemical Analysis Method of Superalloy - Determination of Cerium Content by ArsenazoⅢ Absorbance Spectrophotometry
- HB 5220.44-2008 Methods for chemical analysis of superalloys. Part 44: Determination of arsenic content by distillation separation-molybdenum blue photometric method
Professional Standard - Energy, temperature analysis
- NB/T 20403-2017RK Transient analysis of pressure and temperature in pressurized water reactor nuclear power plant compartment
- NB/T 20404-2017RK Transient Analysis of Containment Pressure and Temperature in PWR Nuclear Power Plant
国家能源局, temperature analysis
- NB/T 20403-2017 Transient analysis of pressure and temperature in compartments of pressurized water reactor nuclear power plants
- NB/T 20404-2017 Transient analysis of pressure and temperature of containment of pressurized water reactor nuclear power plant
European Committee for Electrotechnical Standardization（CENELEC）, temperature analysis
- EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers
Professional Standard - Public Safety Standards, temperature analysis
- GA/T 76-1994 Test method for thermal analysis of the constant temperature stability of substances
RU-GOST R, temperature analysis
- GOST R 56723-2015 Plastics. Thermomechanical analysis (TMA). Part 3. Determination of penetration temperature
- GOST 29127-1991 Plastics. Thermogravimetry of polymers. Temperature scanning method
- GOST R IEC 61207-6-2010 Gas analyzers. Expression of performance. Part 6. Photometric gas analyzers
- GOST 32618.2-2014 Plastics. Thermomechanical analysis (TMA). Part 2. Determination of coefficient of linear thermal expansion and glass transition temperature
- GOST 27981.5-1988 Copper of high purity. Methods of photometric analysis
- GOST R IEC 61853-1-2013 Photovoltaic modules. Determination of performance testing and energy rating. Part 1. Irradiance and temperature performance measurement according to irradiance and temperature. Power rating
- GOST 27981.5-2015 Copper of high purity. Methods of photometric analysis
- GOST 16782-2015 Plastics. Determination of the brittleness temperature by impact
- GOST R 57739-2017 Polymer composites. Method for determination of glass transition temperature by dynamic mechanical analysis
- GOST 27753.0-1988 Greenhouse grounds. General requirements to methods for analysis
Professional Standard - Medicine, temperature analysis
- YY/T 0641-2008 Standard Test Method for Transformation Temperature Of nickel.Titanium Alloys by Thermal analysis
GOSTR, temperature analysis
- GOST R 57931-2017 Composites. Determination of melting and crystallization temperatures by thermal analysis
American Society of Mechanical Engineers (ASME), temperature analysis
BE-NBN, temperature analysis
- NBN T 63-123-1980 Surface active agents - Analysis of soaps - Determination of low contents of free glycerol - Spectrophotometric method
- NBN M 02-011-1988 Hard coal - Size analysis
National Metrological Technical Specifications of the People's Republic of China, temperature analysis
- JJF 1821-2020 Calibration Specification for Temperature Calibration Devices for Polymerase Chain Reaction Analyzers
- JJF 2019-2022 Specification for temperature performance test of liquid constant temperature test equipment
Japanese Industrial Standards Committee (JISC), temperature analysis
- JIS K 7095:2012 Testing method for glass transition temperatures of carbon fibre reinforced plastics by thermal analysis
- JIS K 7196:1991 Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis
- JIS K 0152:2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Repeatability and constancy of intensity scale
- JIS K 7196 AMD 1:2012 Testing method for softening temperature of thermoplastic film and sheeting by thermomechanical analysis (Amendment 1)
- JIS Z 8829:2021 Particle size analysis -- Particle tracking analysis (PTA) method
- JIS H 7851:2005 Testing method for heat resistance under temperature gradient
- JIS Z 8827-1:2008 Particle size analysis -- Image analysis methods -- Part 1: Static image analysis methods
- JIS Z 8827-2:2010 Particle size analysis -- Image analysis methods -- Part 2: Dynamic image analysis methods
- JIS Z 8827-1:2018 Particle size analysis -- Image analysis methods -- Part 1: Static image analysis methods
- JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
- JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
- JIS H 7309:2012 Superconductivity -- Critical temperature measurement -- Critical temperature of composite superconductors by a resistance method
Professional Standard - Petroleum, temperature analysis
YU-JUS, temperature analysis
- JUS Z.C8.030-1986 Determination of fjammability of plastics. Determination ofthe temperature of evolution of flammable gases (decompositin temperature)
Lithuanian Standards Office , temperature analysis
- LST EN 12470-4-2002+A1-2009 Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement
- LST EN 61207-6-2001 Expression of performance of gas analyzers. Part 6: Photometric analyzers (IEC 61207-6:1994)
- LST EN 1252-1+AC-2001 Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C
- LST EN 12470-2-2002+A1-2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
- LST EN 12470-5-2004 Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device)
- LST EN 1252-2-2002 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80°C and -20°C
国家市场监督管理总局、中国国家标准化管理委员会, temperature analysis
- GB/T 36800.2-2018 Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
- GB/T 38879-2020 Particle—Size analysis—Color image analysis methods
- GB/T 1425-2021 Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis
- GB/T 38359-2019 Data-analysis methods of strength properties for structural wood and wood-based products
工业和信息化部, temperature analysis
- YS/T 1258-2018 Thermal Analysis Methods for Testing Melting and Crystallization Temperatures of Nonferrous Metal Materials
- HG/T 5200-2017 Analysis method of chemical composition of activated carbon catalyst for removal of inorganic sulfur at room temperature
KR-KS, temperature analysis
Professional Standard - Chemical Industry, temperature analysis
Standard Association of Australia （SAA）, temperature analysis
- AS EN 12470.4:2004 Clinical thermometers - Performance of electrical thermometers for continuous measurement
- AS 1038.18:2006 Coal and coke - Analysis and testing - Coke - Size analysis
CEN - European Committee for Standardization, temperature analysis
- EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C
CL-INN, temperature analysis
European Association of Aerospace Industries, temperature analysis
- AECMA PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys Edition P 1
- AECMA PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis
National Metrological Verification Regulations of the People's Republic of China, temperature analysis
- JJG 2030-1989 Verification Scheme of Measuring Instruments for Colour Temperature (Distribution Temperature)
ESDU - Engineering Sciences Data Unit, temperature analysis
- ESDU 89023-1989 Temperatures in plates subjected to a recovery temperature varying linearly with time.
- ESDU 84007 A-1991 The treatment of calibrations of total air temperature probes for use in flight-test analysis work.
Danish Standards Foundation, temperature analysis
- DS/EN 1252-1/AC:2001 Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C
- DS/EN 1252-1:1998 Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C
- DS/EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method
- DS/EN 12470-2+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
- DS/EN 61788-10:2007 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
- DS/EN 1252-2:2001 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C
- DS/ISO 1953:1994 Hard coal - Size analysis by sieving
North Atlantic Treaty Organization Standards Agency, temperature analysis
- STANAG 4540-2002 EXPLOSIVES, PROCEDURES FOR DYNAMIC MECHANICAL ANALYSIS (DMA) AND DETERMINATION OF GLASS TRANSITION TEMPERATURE
IN-BIS, temperature analysis
Indonesia Standards, temperature analysis
- SNI 16-7061-2004 The measurement of work climates (hot) by wet bulb globe temperature index parameters
RO-ASRO, temperature analysis
ES-AENOR, temperature analysis
ZA-SANS, temperature analysis
ET-QSAE, temperature analysis
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, temperature analysis
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, temperature analysis
- GB/T 17215.9311-2017 Electricity metering equipment—Dependability—Part 311:Accelerated reliability testing—Elevated temperature and humidity
- GB/T 21649.2-2017 Particle size analysis—Image analysis methods—Part2：Dynamic image analysis methods
- GB/T 33067-2016 Analysis method of chemical composition for Pd deoxidant catalyst at the middle temperature
HU-MSZT, temperature analysis
VN-TCVN, temperature analysis
AENOR, temperature analysis
- UNE-EN 12470-2:2001+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
- UNE-EN ISO 21028-1:2017 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
- UNE-EN 1252-2:2002 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperature between -80 oC and -20 oC.
BR-ABNT, temperature analysis
SE-SIS, temperature analysis
Institute of Interconnecting and Packaging Electronic Circuits (IPC), temperature analysis
Society of Automotive Engineers (SAE), temperature analysis
IPC - Association Connecting Electronics Industries, temperature analysis
Military Standard of the People's Republic of China-General Armament Department, temperature analysis
未注明发布机构, temperature analysis
- DIN EN 933-1:1997 Test for geometrical properties of aggregates — Part 1: Determination of particle size distribution — Granulometric analysis, Sieving method
- BS 1041-2.2:1989(2000) Temperature measurement — Part 2 : Expansion thermometers — Section 2.2 Guide to selection and use of dial - type expansion thermometers
Henan Provincial Standard of the People's Republic of China, temperature analysis
- DB41/T 693-2011 Temperature change method for evaluating the temperature-adjusting performance of textile fabrics
United States Navy, temperature analysis
Defense Logistics Agency, temperature analysis
Professional Standard - Customs, temperature analysis
- HS/T 7-2006 Qualitative analysis of 1,4-dihydroxyanthraquinone in diesel fuel spectrophotometric method
FI-SFS, temperature analysis
Professional Standard - Ferrous Metallurgy, temperature analysis
- YB/T 5244-1993 Positive temperature coefficient constant elastic alloy 3J63
ACI - American Concrete Institute, temperature analysis
- ACI SP-129-1991 Computer Analysis of the Effects of Creep@ Shrinkage@ and Temperature Changes on Concrete Structures (Out of Print)
Professional Standard - Coal, temperature analysis
IT-UNI, temperature analysis
Taiwan Provincial Standard of the People's Republic of China, temperature analysis