ZH

RU

ES

Detection of Bulk Density

Detection of Bulk Density, Total:499 items.

In the international standard classification, Detection of Bulk Density involves: Fertilizers, Measurement of volume, mass, density, viscosity, Cutting tools, Products of the chemical industry, Powder metallurgy, Construction materials, Fuels, Analytical chemistry, Nuclear energy engineering, Refractories, Soil quality. Pedology, Inorganic chemicals, Milk and milk products, Air quality, Metalliferous minerals, Paint ingredients, Paper and board, Paper products, Ceramics, Tea. Coffee. Cocoa, Plastics, Cereals, pulses and derived products, Coals, Pesticides and other agrochemicals, Wastes, Raw materials for rubber and plastics, Road vehicles in general, Non-destructive testing, Waxes, bituminous materials and other petroleum products, Road engineering, Tobacco, tobacco products and related equipment, Cork and cork products, Rubber and plastics products, Mining and quarrying, Document imaging applications, Chipless working equipment, Magnetic materials, Particle size analysis. Sieving, Wood, sawlogs and sawn timber, Rubber, Electricity. Magnetism. Electrical and magnetic measurements, Measurement of fluid flow, Non-ferrous metals, Cellular materials, Paint coating equipment, Materials for the reinforcement of composites, Organic chemicals, Aids for disabled or handicapped persons.


VN-TCVN, Detection of Bulk Density

  • TCVN 4778-2009 Coal.Determination of bulk density
  • TCVN 4778-2015 Coal - Determination of bulk density for the use in charging of coke ovens
  • TCVN 5088-1990 Instant tea.Determination of free-flow and compacted bulk densities
  • TCVN 7034-2002 Instant coffee.Determination of free-flow and compacted bulk densities
  • TCVN 6842-2007 Dried milk and dried milk products.Determination of bulk density
  • TCVN 6355-5-2009 Bricks.Test methods.Part 5: Determination of bulk density.

Danish Standards Foundation, Detection of Bulk Density

  • DS/EN 1237:1996 Fertilizers - Determination of bulk density (tapped)
  • DS/EN ISO 7837:2000 Fertilizeres - Determination of bulk density (loose) of fine-grained fertilizers
  • DS/EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
  • DS/EN 1015-6/A1:2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • DS/EN 1015-6:1999 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • DS/EN 1015-10/A1:2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • DS/EN 1015-10:2002 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • DS/EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method
  • DS/EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method
  • DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • DS/EN 1236:1996 Fertilizers - Determination of bulk density (loose)
  • DS/EN 725-8:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
  • DS/EN 772-4:1999 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • DS/EN 15761:2010 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
  • DS/EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
  • DS/CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
  • DS/EN 15103:2010 Solid biofuels - Determination of bulk density
  • DS/EN 60404-13:2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • DS/EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens

National Metrological Verification Regulations of the People's Republic of China, Detection of Bulk Density

AENOR, Detection of Bulk Density

  • UNE 32205:1984 COKE. DETERMINATION OF BULK DENSITY.
  • UNE-EN 1236:1996 FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE).
  • UNE-EN 1237:1996 FERTILIZERS. DETERMINATION OF BULK DENSITY (TAPPED).
  • UNE-EN ISO 7837:2001 FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE) OF FINE-GRAINED FERTILIZERS. (ISO 7837:1992)
  • UNE 53137:1977 PLASTICS. PVC RESINS. DETERMINATION OF THE COMPACTED APPARENT BULK DENSITY
  • UNE-EN ISO 12625-3:2015 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
  • UNE-EN 1015-6:1999 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 6: DETERMINATION OF BULK DENSITY OF FRESH MORTAR
  • UNE-EN 1015-6:1999/A1:2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • UNE-EN 1015-10:2000/A1:2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • UNE-EN 1097-3:1999 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS.
  • UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
  • UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
  • UNE-EN 993-1:1996 METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 1: DETERMINATION OF BULK DENSITY, APPARENT POROSITY AND TRUE POSORITY.
  • UNE-EN 15761:2010 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
  • UNE-EN ISO 7971-3:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
  • UNE-EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
  • UNE-EN ISO 10545-3:1997 CERAMIC TILES. PART 3: DETERMINATION OF WATER ABSORPTION, APPARENT POROSITY, APPARENT RELATIVE DENSITY AND BULK DENSITY. (ISO 10545-3:1995), INCLUDING TECHNICAL CORRIGENDUM 1:1997).
  • UNE-EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens

American Society for Testing and Materials (ASTM), Detection of Bulk Density

  • ASTM UOP563-14 Packed Apparent Bulk Density of Molecular Sieves
  • ASTM UOP294-14 Apparent Bulk Density of Catalyst Particles
  • ASTM UOP778-81 Apparent Bulk Density of Extruded Catalyst
  • ASTM D6347/D6347M-99 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM UOP762-76 Apparent Bulk Density of Solid Phosphoric Acid Catalyst
  • ASTM D5057-90(1996) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D4292-23 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • ASTM D6347/D6347M-05(2010) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM D4531-86(1996) Standard Test Methods for Bulk Density of Peat and Peat Products
  • ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM D7481-18 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
  • ASTM D5057-90(2006) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D5057-90(2001) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D7454-19 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
  • ASTM C134-95(2023) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
  • ASTM C29/C29M-07 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
  • ASTM D5057-10 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D5057-17 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D8167/D8167M-18a Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D8167/D8167M-18 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D6111-19 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-18 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-13 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-13a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-09 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D8167/D8167M-23 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D8167/D8167M-23e1 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D2726/D2726M-21 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
  • ASTM D2726-08 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2726-09 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2726/D2726M-19 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
  • ASTM D2726/D2726M-17 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
  • ASTM D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
  • ASTM D4164-13(2018) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM D4164-13 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM D4699-03(2013) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
  • ASTM D4781-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM D4781-03(2013) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM C830-00(2023) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
  • ASTM D5959-96(2003) Standard Test Method for Bulk Density of Level Paintbrush Filaments
  • ASTM D5959-12(2017) Standard Test Method for Bulk Density of Level Paintbrush Filaments
  • ASTM D4512-22 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM D4512-03(2018)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM D7481-09 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
  • ASTM C914-95(1999) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
  • ASTM D6737-12(2017) Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
  • ASTM D4512-03(2013) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM D4512-03(2013)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder

Universal Oil Products Company (UOP), Detection of Bulk Density

  • UOP 563-2014 Packed Apparent Bulk Density of Molecular Sieves
  • UOP 778-2007 Packed Apparent Bulk Density (ABD) of Extruded Catalyst
  • UOP 294-2014 Apparent Bulk Density of Catalyst Particles

Lithuanian Standards Office , Detection of Bulk Density

  • LST EN 1237-2002 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
  • LST ISO 6782:1995 Aggregates for concrete. Determination of bulk density
  • LST EN ISO 12625-3:2005 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density (ISO 12625-3:2005)
  • LST EN 1236-2002 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified)
  • LST EN 725-9-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
  • LST ISO 8967:2006 Dried milk and dried milk products - Determination of bulk density (identical ISO 8967:2005)
  • LST EN ISO 7837:2001 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992)
  • LST EN 1015-6-2002 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • LST EN 1015-6-2002/A1-2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • LST EN 1015-10-2002 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • LST EN 1015-10-2002/A1-2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • LST EN 725-8-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
  • LST EN 772-4-2000 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • LST EN 15761-2010 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
  • LST EN 1097-3-2002 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
  • LST EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
  • LST EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
  • LST EN 15103-2010 Solid biofuels - Determination of bulk density
  • LST EN 12697-6-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
  • LST 1361.7-1995 Mineral aggregates for road construction. Testing methods. Determination of absolute density, dry bulk density, compactness and porosity
  • LST EN 60404-13-2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip (IEC 60404-13:1995)

CZ-CSN, Detection of Bulk Density

  • CSN 44 1367-1963 Determination of the bulk density of coke
  • CSN 44 1324-1985 Determination of the bulk density of coal for special purposes
  • CSN 44 1324-1963 Determination of ?he bulk density of coal for special purposes
  • CSN 66 8102 Cast.3-1978 Smokeless powders. Methods of testing. Determination of bulk density
  • CSN 50 0311-1983 Paper testing. Determination of thiokness, pparent density and speciíic volume
  • CSN 42 0895 Cast.18-1988 Testing of granulated aluminium powder, powder and paste. Determination of apparent density
  • CSN 44 1822-1989 Iron ores and manganese ores, agglomerates and pellets. Methods for determination of specific, apparent and bulk density

International Organization for Standardization (ISO), Detection of Bulk Density

  • ISO 9136:1989 Abrasive macrograins; determination of bulk density
  • ISO 5311:1983 Fertilizers — Determination of bulk density (tapped)
  • ISO 6782:1982 Aggregates for concrete; Determination of bulk density
  • ISO/CD 18708:2023 Solid recovered fuels — Determination of bulk density
  • ISO 9161:2004 Uranium dioxide powder - Determination of apparent density and tap density
  • ISO 8967:2005 | IDF 134:2005 Dried milk and dried milk products — Determination of bulk density
  • ISO 9136-1:2004 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
  • ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2: Microgrits
  • ISO 3944:1992 Fertilizers; determination of bulk density (loose)
  • ISO 23499:2008 Coal - Determination of bulk density
  • ISO 7971-3:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 3: Routine method
  • ISO 3852:1988 Iron ores; determination of bulk density
  • ISO 2031:1991 Granulated cork; determination of bulk density
  • ISO 2031:2015 Granulated cork - Determination of apparent bulk density
  • ISO 1013:2020 Coke — Determination of bulk density in a large container
  • ISO 17828:2015 Solid biofuels - Determination of bulk density
  • ISO 23499:2013 Coal.Determination of bulk density for the use in charging of coke ovens
  • ISO 2189:1986 Expanded pure agglomerated cork; Determination of bulk density
  • ISO 6770:1982 Instant tea; Determination of free-flow and compacted bulk densities
  • ISO 534:1988 Paper and board; determination of thickness and apparent bulk density or apparent sheet density
  • ISO/CD 6640 Determination of concentration or density of Suspended and deposited sediment in water bodies by Radiometric Methods
  • ISO 7971:1986 Cereals; Determination of bulk density, called "mass per hectolitre" (Reference method)
  • ISO 8460:1987 Instant coffee; Determination of free-flow and compacted bulk densities
  • ISO 2189:1972 Cork — Expanded pure agglomerated cork — Determination of bulk density
  • ISO 15100:2000 Plastics - Reinforcement fibres - Chopped strands; Determination of bulk density
  • ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
  • ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
  • ISO 7971-2:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

YU-JUS, Detection of Bulk Density

  • JUS U.M1.009-1993 Concrete - Determination of bulk density of concrete
  • JUS B.C8.023-1997 Cement - Determination of bulk density
  • JUS B.B8.032-1980 Testing of natural stone. Determination of bulk density, density, coefficient of density, and porosity
  • JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content

Standard Association of Australia (SAA), Detection of Bulk Density

Association Francaise de Normalisation, Detection of Bulk Density

  • NF ISO 3852:1989 Minerais de fer - Détermination de la masse volumique apparente
  • NF ISO 2031:2015 Granulés de liège - Détermination de la masse volumique apparente
  • NF EN ISO 10545-3:2018 Carreaux et dalles céramiques - Partie 3 : détermination de l'absorption d'eau, de la porosité ouverte, de la densité relative apparente et de la masse volumique globale
  • NF EN ISO 17828:2016 Biocombustibles solides - Détermination de la masse volumique apparente
  • NF EN ISO 9161:2021 Poudre de dioxyde d'uranium - Détermination de la masse volumique apparente et de la masse volumique après tassement
  • NF X31-502:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Densitomètre à membrane.
  • NF EN ISO 845:2009 Caoutchoucs et plastiques alvéolaires - Détermination de la masse volumique apparente
  • NF EN 15761:2010 Supports de culture préformés - Détermination de la longueur, de la largeur, de la hauteur, du volume et de la masse volumique apparente
  • NF EN ISO 29470:2020 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la masse volumique apparente
  • NF EN 1602:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la masse volumique apparente
  • NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
  • NF E75-231-1*NF ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Part 1 : macrogrits.
  • NF ISO 1306:2005 Ingrédients de mélange du caoutchouc - Noir de carbone (en granules) - Détermination de la masse volumique apparente
  • NF ISO 15100:2001 Plastiques - Fibres de renfort - Fils coupés - Détermination de la masse volumique apparente
  • NF EN ISO 23145-1:2016 Céramiques techniques - Détermination de la masse volumique en vrac des poudres céramiques - Partie 1 : masse volumique après tassement
  • NF EN ISO 23145-2:2016 Céramiques techniques - Détermination de la masse volumique en vrac des poudres céramiques - Partie 2 : Masse volumique sans tassement
  • NF EN ISO 3923-1:2018 Poudres métalliques - Détermination de la masse volumique apparente - Partie 1 : méthode de l'entonnoir
  • NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
  • NF ISO 5017:2013 Produits réfractaires façonnés denses - Détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale
  • NF EN ISO 61:1999 Matières plastiques - Détermination de la masse volumique apparente des matières à mouler non susceptibles de s'écouler à travers un entonnoir donné
  • NF A20-200*NF ISO 3852:1989 Iron ores. Determination of bulk density.
  • NF EN 14617-1:2013 Pierre agglomérée - Méthodes d'essai - Partie 1 : détermination de la masse volumique apparente et du coefficient d'absorption d'eau
  • NF EN ISO 60:1999 Plastiques - Détermination de la masse volumique apparente des matières susceptibles de s'écouler à travers un entonnoir donné
  • NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
  • NF B42-009:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 9 : determination of untamped bulk density.
  • NF EN 993-1:2018 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 1 : détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale
  • NF EN 993-18:2002 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 18 : détermination de la masse volumique apparente des matériaux en grains par la méthode à l'eau sous vide
  • NF B42-008:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 8 : determination of tapped bulk density.
  • NF B57-012*NF ISO 2031:2015 Granulated cork - Determination of apparent bulk density
  • NF EN 12697-7:2022 Mélanges bitumineux - Méthodes d'essai - Partie 7 : détermination de la masse volumique apparente des éprouvettes bitumineuses par les rayons gamma
  • NF EN 1097-3:1998 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 3 : méthode pour la détermination de la masse volumique en vrac et de la porosité intergranulaire
  • NF X34-105*NF EN ISO 17828:2016 Solid biofuels - Determination of bulk density
  • NF C28-901-13*NF EN IEC 60404-13:2018 Magnetic materials - Part 13 : methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
  • NF Q03-016:1993 Paper and board. Determination of thickness and apparent bulk density or apparent sheet density.
  • NF U42-402:1985 Fertilizers. Determination of bulk density (loose) of fine-grained fertilizers.
  • NF U44-314*NF EN 15761:2010 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
  • NF B10-503:1973 QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF POROSITY, OF THE TRUE WEIGHT PER UNIT VOLUME, AND OF THE APPARENT WEIGHT PER UNIT VOLUME.

RU-GOST R, Detection of Bulk Density

  • GOST 27801-1993 Alumina. Method for the determination of bulk density
  • GOST R 55450-2013 Organic fertilizers. Method for determination of bulk density
  • GOST ISO 8460-2015 IInstant coffee. Determination of free-flow and compacted bulk densities
  • GOST ISO 7971-3-2021 Cereals. Determination of bulk density, called mass per hectolitre. Part 3. Routine method
  • GOST ISO 7971-3-2013 Determination of bulk density, called mass per hektolitre. Part 3. Routine method
  • GOST 32558-2013 Coal. Determination of bulk density
  • GOST 25732-1988 Iron and manganese ores, concentrates, agglomerates and pellets. Methods for determination of real, middle, bulk density and porosity
  • PNST 106-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density
  • GOST 31977-2012 Dried milk products. Method for determination of bulk density
  • GOST 13673-2013 Milling peat. Method for determination of bulk density
  • GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
  • GOST EN 1237-2013 Fertilizers. Method for determination of bulk density (tapped)
  • GOST R 54191-2010 Solid biofuels. Determination of bulk density
  • GOST R 54225-2010 Solid recovered fuels. Determination of bulk density
  • GOST R 54251-2010 Coke. Method for determination of bulk density in a small container
  • GOST R ISO 6770-2012 Instant tea. Determination of free flow and compacted bulk densities
  • GOST R 54225-2010(2019) Solid recovered fuels. Determination of bulk density
  • GOST R 54251-2010(2019) Coke. Method for determination of bulk density in a small container
  • GOST ISO 5017-2014 Dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
  • GOST 25699.14-1993 Rubber compounding ingredients. Carbon black (pelletized). Determination of pour density
  • GOST EN 1236-2013 Fertilizers. Method of determination of bulk density without loose

IN-BIS, Detection of Bulk Density

Japanese Industrial Standards Committee (JISC), Detection of Bulk Density

未注明发布机构, Detection of Bulk Density

  • BS EN 1236:1995(2010) Fertilizers — Determination of bulk density (loose)
  • BS EN 1237:1995(2010) Fertilizers — Determination of bulk density (tapped)
  • BS ISO 8967:2005(2006) Dried milk and dried milk products — Determination of bulk density
  • BS EN ISO 7837:2001(2010) Fertilizers — Determination of bulk density (loose) of fine - grained fertilizers
  • BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
  • DIN EN 384:2004 Timber for load-bearing purposes – determination of characteristic values for mechanical properties and bulk density
  • BS ISO 3852:2007(2008) Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
  • BS 3482-10:1991(1999) Methods of test for Desiccants — Part 10 : Determination of bulk density (dry basis)
  • DIN EN 12390-7:2019 Testing of hardened concrete – Part 7: Bulk density of hardened concrete
  • BS EN 1094-4:1995(1999) Insulating refractory products — Part 4 : Determination of bulk density and true porosity
  • BS 1902-3.17:1990(2011) Methods of testing Refractory materials — Part 3 : General and textural properties — Section 3.17 Determination of volume and bulk density of dense shaped products (methods 1902 - 317)
  • DIN EN ISO 7971-3:2019 Cereals – Determination of bulk density, so-called mass per hectoliter – Part 3: Routine procedures (ISO 7971-3:2019)
  • BS 6404-13:1996(1999) Magnetic materials — Part 13 : Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip

RO-ASRO, Detection of Bulk Density

Professional Standard - Chemical Industry, Detection of Bulk Density

  • HG/T 4680-2014 Test method for single pellet crush strength of fertilizer catalysts

British Standards Institution (BSI), Detection of Bulk Density

  • BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
  • DD CEN/TS 15401:2010 Solid recovered fuels. Determination of bulk density
  • BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
  • BS ISO 8967:2005 Dried milk and dried milk products. Determination of bulk density
  • BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
  • BS ISO 1013:2020 Coke. Determination of bulk density in a large container
  • DD CEN/TS 15401:2006 Solid recovered fuels — Methods for the determination of bulk density
  • 21/30397451 DC BS ISO 567. Coke. Determination of bulk density in a small container
  • BS EN ISO 11272:2017 Tracked Changes. Soil quality. Determination of dry bulk density
  • 21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
  • BS ISO 567:2021 Tracked Changes. Coke. Determination of bulk density in a small container
  • BS ISO 15100:2000 Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
  • BS 2782-6 Method 621D:1978 Methods of testing plastics. Dimensional properties. Determination of compacted apparent bulk density of PVC resins
  • BS ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks. Determination of bulk density
  • BS EN ISO 10545-3:2018 Tracked Changes. Ceramic tiles. Determination of water absorption, apparent porosity, apparent relative density and bulk density
  • BS 6986-2:1988 Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
  • BS EN ISO 23145-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Tap density
  • 21/30436585 DC BS EN 15761. Pre-shaped growing media. Determination of the dimensions measured and bulk density
  • BS 3762-4.2:1986 Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
  • BS EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders - Untapped density
  • BS EN ISO 7971-3:2019 Tracked Changes. Cereals. Determination of bulk density, called mass per hectolitre. Routine method
  • BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • 19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • BS EN 12697-7:2022 Tracked Changes. Bituminous mixtures. Test methods. Determination of the bulk density of bituminous specimens by gamma rays
  • 18/30382725 DC BS EN 12697-6. Bituminous mixtures. Test methods. Part 6. Determination of bulk density of bituminous specimens
  • BS 5752-11:1987 Methods of test for coffee and coffee products. Instant coffee: determination of free-flow and compacted bulk densities
  • BS EN 1236:1995 Fertilizers - Determination of bulk density (loose)
  • BS EN 993-1:2018 Tracked Changes. Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
  • BS EN IEC 60404-13:2018 Tracked Changes. Magnetic materials. Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
  • BS EN ISO 17828:2015 Solid biofuels. Determination of bulk density
  • BS EN 1237:1995 Fertilizers - Determination of bulk density (tapped)
  • BS EN 15103:2010 Solid biofuels. Determination of bulk density
  • BS ISO 2031:2015 Granulated cork. Determination of apparent bulk density
  • BS EN 15103:2009 Solid biofuels - Determination of bulk density
  • BS ISO 23499:2013 Coal. Determination of bulk density for the use in charging of coke ovens
  • BS 1902 Sec.3.17:1990 Methods of testing refractory materials. General and textural properties. Determination of volume and bulk density of dense shaped products (methods 1902-317)
  • BS 6043-2.13:1996 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of tapped bulk density of green and calcined coke
  • 20/30426156 DC BS EN 12697-7. Bituminous mixtures. Test methods. Part 7. Determination of the bulk density of bituminous specimens by gamma rays
  • BS 1902-3.17:1990 Methods of testing refractory materials - General and textural properties - Determination of volume and bulk density of dense shaped products (methods 1902-317)
  • BS 5752-16:1996 Methods of test for coffee and coffee products. Green and roasted coffee. Determination of free-flow bulk density of whole beans (routine method)
  • BS EN 15761:2010 Pre-shaped growing media. Determination of length, width height, volume and bulk density
  • BS EN 15761:2009 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
  • BS 7755-5.6:1999 Soil quality - Physical methods - Determination of dry bulk density
  • BS EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Routine method
  • BS EN ISO 7971-2:2019 Tracked Changes. Cereals. Determination of bulk density, called mass per hectolitre. Method of traceability for measuring instruments through reference to the international standard instrument
  • BS ISO 17190-9:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for gravimetric determination of flow rate and bulk density

German Institute for Standardization, Detection of Bulk Density

  • DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
  • DIN EN ISO 17828:2016-05 Solid biofuels - Determination of bulk density (ISO 17828:2015); German version EN ISO 17828:2015
  • DIN CEN/TS 15401:2010-09*DIN SPEC 1122:2010-09 Solid recovered fuels - Determination of bulk density; German version CEN/TS 15401:2010
  • DIN EN 15761:2010-04 Pre-shaped growing media - Determination of length, width, height, volume and bulk density; German version EN 15761:2009 / Note: To be replaced by DIN EN 15761 (2022-01).
  • DIN ISO 9136-1:2006 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004);English version of DIN ISO 9136-1:2006-03
  • DIN 51705:2001-06 Testing of solid fuels - Determination of the bulk density of solid fuels
  • DIN 51918:2018-07 Testing of carbonaceous materials - Determination of bulk density and the open porosity
  • DIN EN 1237:1995-08 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified); German version EN 1237:1995
  • DIN EN 1236:1995-08 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified); German version EN 1236:1995
  • DIN 52102:2013-10 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
  • DIN 51932:2010-06 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
  • DIN EN ISO 7837:2000-06 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000
  • DIN ISO 9136-2:2000-07 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
  • DIN EN 15761:2022-01 Pre-shaped growing media - Determination of the dimensions measured and bulk density; German and English version prEN 15761:2021 / Note: Date of issue 2021-12-10*Intended as replacement for DIN EN 15761 (2010-04).
  • DIN ISO 9136-1:2006-03 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
  • DIN EN ISO 10545-3:2018-06 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018); German version EN ISO 10545-3:2018
  • DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
  • DIN EN ISO 12625-3:2014-09 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014); German version EN ISO 12625-3:2014
  • DIN EN 12697-6:2020 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
  • DIN EN 12697-6:2020-05 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2020
  • DIN EN ISO 7971-3:2020-02 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019); German version EN ISO 7971-3:2019
  • DIN EN ISO 17892-2:2015-03 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014); German version EN ISO 17892-2:2014
  • DIN 51705:2001 Testing of solid fuels - Determination of the bulk density of solid fuels
  • DIN 52170-1:2023-02 Determination of composition of hardened concrete - Part 1: General, terms, sampling and dry-bulk density
  • DIN EN 1094-4:1995-09 Insulating refractory products - Part 4: Determination of bulk density and true porosity of shaped products; German version EN 1094-4:1995
  • DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
  • DIN EN 1097-3:1998-06 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
  • DIN EN 772-4:1998-10 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units; German version EN 772-4:1998
  • DIN EN ISO 23145-1:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007); German version EN ISO 23145-1:2016
  • DIN EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
  • DIN EN ISO 23145-2:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012); German version EN ISO 23145-2:2016
  • DIN EN IEC 60404-13:2020-06 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (IEC 60404-13:2018); German version EN IEC 60404-13:2018 / Note: DIN EN 60404-13 (2008-05) remains valid alongside this...
  • DIN EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
  • DIN EN 12697-7:2020 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays; German and English version prEN 12697-7:2020
  • DIN EN 12697-7:2022-04 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays; German version EN 12697-7:2022
  • DIN 18555-3:1982 Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density
  • DIN 52182:1976 Testing of wood; determination of density
  • DIN EN 993-1:2019-03 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity; German version EN 993-1:2018
  • DIN EN 993-18:2002-11 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
  • DIN EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units; German version EN 772-4:1998
  • DIN 51918:2012 Testing of carbonaceous materials - Determination of bulk density and the open porosity
  • DIN 51918:2018 Testing of carbonaceous materials - Determination of bulk density and the open porosity
  • DIN EN 15761:2022 Pre-shaped growing media - Determination of the dimensions measured and bulk density; German and English version prEN 15761:2021
  • DIN 1996-7:1992 Testing of asphalt; determination of bulk density, compacted density, void content and degree of compaction
  • DIN 54410:1985 Testing of ion exchangers; determination of density

HU-MSZT, Detection of Bulk Density

European Committee for Standardization (CEN), Detection of Bulk Density

  • CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
  • EN ISO 17828:2015 Solid biofuels - Determination of bulk density (ISO 17828:2015)
  • EN 1237:1995 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
  • EN 20534:1993 Paper and Board - Determination of Thickness and Apparent Bulk Density or Apparent Sheet Density (ISO 534 : 1988)
  • EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • prEN ISO 23145-1 rev Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007)
  • FprEN 12697-7-2021 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
  • EN 15103:2009 Solid biofuels - Determination of bulk density
  • EN 1236:1995 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified)
  • PD CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
  • EN 15761:2009 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
  • EN ISO 7837:2000 Fertilizers - Determination of Bulk Density (Loose) of Fine-Grained Fertilizers ISO 7837:1992

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Detection of Bulk Density

  • GB 6286-1986 Method for Determination of Bulk Density of Molecular Sieve
  • GB/T 6286-1986 Determination of bulk density for molecular sieve
  • GB/T 23771-2009 Determination of bulk density for inorganic chemical products
  • GB/T 16913.3-1997 Methods of dust character test--Part 3: Determination of bulk density--Natural bulk method
  • GB/T 21877-2015 Dyestuffs and intermediate of dyes.Determination of tapping density
  • GB/T 21877-2008 Dyestuffs and intermediate of dyes.Determination of tapping density
  • GB/T 8331-2008(英文版) Determination of bulk density of ion exchange resins in wet state
  • GB/T 20316.2-2006 Abrasive grains. Determination of bulk density. Part 2: Microgrits
  • GB/T 20316.1-2009 Abrasive grains.Determiantaion of bulk density.Part 1:Macrogrits
  • GB/T 13566.1-2008 Fertilizers.Determination of bulk density.Part 1:Loose density
  • GB/T 18798.5-2013 Instant tea.Part 5:Methods for determination of free-flow and compacted bulk densities
  • GB/T 13566-1992 Determination of bulk density for fertilizers
  • GB/T 14853.4-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of mass strength
  • GB/T 14853.4-2013 Rubber compounding ingredients.Pelletized carbon black.Part 4:Determination of mass strength
  • GB 5211.4-1985 Determination of Apparent Density of Packed Volume of Pigments
  • GB/T 5211.4-1985 Determination of tamped volume and apparent density of pigments
  • GB/T 6343-1995 Cellular plastics and rubbers--Determination of apparent (bulk) density

国家市场监督管理总局、中国国家标准化管理委员会, Detection of Bulk Density

  • GB/T 6286-2021 Determination of bulk density for molecular sieve
  • GB/T 40549-2021 Determination of bulk density of coke in a small container
  • GB/T 40401-2021 Determination of density by volumetric displacement—Skeleton density by gas pycnometry

Korean Agency for Technology and Standards (KATS), Detection of Bulk Density

  • KS A ISO 9161:2009 Uranium dioxide powder-Determination of apparent density and tap density
  • KS L 6509-2001 Testing method for bulk density of artificial abrasives
  • KS L 6509-1974 Testing method for bulk density of artificial abrasives
  • KS E ISO 567-2002(2017) Metallic and other non-organic coatings-Measurement of coating thicknesses-Fizeau multiple-beam interferometry method
  • KS L 6529-2013 Test method for bulk density of artificial abrasive microgrits
  • KS L ISO 5017-2013(2018) Dense shaped refractory products?Determination of bulk density, apparent porosity and true porosity
  • KS F 2505-2017(2022) Methods of test for bulk density of aggregates and solid content in aggregates
  • KS M ISO 3944:2006 Fertilizers-Determination of bulk density(loose)
  • KS M ISO 3944:2013 Fertilizers-Determination of bulk density(loose)
  • KS X ISO 6342-2007(2022) Micrographics-Aperture cards-Method of measuring thickness of buildup area
  • KS M ISO 2031:2004 Granulated cork-Determination of bulk density
  • KS E ISO 567:2022 Coke — Determination of bulk density in a small container
  • KS M ISO 17828:2021 Solid biofuels — Determination of bulk density
  • KS C IEC 60404-13-2002(2022) Magnetic materials-Part 13:Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • KS C IEC 60404-13-2002(2017) Magnetic materials-Part 13:Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • KS X ISO 6342-2007(2017) Micrographics-Aperture cards-Method of measuring thickness of buildup area
  • KS H ISO 8967:2021 Dried milk and dried milk products — Determination of bulk density
  • KS M ISO 2189:2004 Expanded pure agglomerated cork-Determination of bulk density
  • KS M ISO 2189:2008 Expanded pure agglomerated cork-Determination of bulk density
  • KS F 2446-2020 Standard test method for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
  • KS L 1618-2-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test methods of properties of ceramic granules-Part 2:Bulk density
  • KS H ISO 8460:2007 Instant coffee-Determination of free-flow and compacted bulk densities
  • KS M ISO 12625-3:2022 Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
  • KS L 6529-2003 Test method for bulk density of artificial abrasive microgrits
  • KS L 6528-2003 Test method for bulk density of artificial abrasive macrogrits
  • KS M 1983-2007 Furfural for industrial use-Determination of acidity to phenolphthalein-Volumetric method

Professional Standard - Machinery, Detection of Bulk Density

International Dairy Federation (IDF), Detection of Bulk Density

  • IDF 134-2005 Dried milk and dried milk products - Determination of bulk density

GOSTR, Detection of Bulk Density

  • GOST 34260-2017 Glass fiber. Chopped strands. Determination of bulk density
  • GOST R 58401.10-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Methods for determining of bulk density
  • GOST R 58402.5-2019 Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Volumetric-functional design system. Method for determination of bulk density and emptiness of coarse aggregate after compaction

Group Standards of the People's Republic of China, Detection of Bulk Density

  • T/CISA 099-2021 Determination of apparent density,bulk density and porosity for iron tailings

CEN - European Committee for Standardization, Detection of Bulk Density

  • PD CEN/TS 15103:2005 Solid biofuels - Methods for the determination of bulk density
  • PD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density
  • PREN 12697-6-2018 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens

National Metrological Technical Specifications of the People's Republic of China, Detection of Bulk Density

CH-SNV, Detection of Bulk Density

ES-UNE, Detection of Bulk Density

  • UNE-EN ISO 17828:2016 Solid biofuels - Determination of bulk density (ISO 17828:2015)
  • UNE-EN ISO 10545-3:2018 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018)
  • UNE-EN 12697-6:2022 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
  • UNE-EN ISO 7971-3:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019)
  • UNE-EN ISO 17892-2:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)
  • UNE-EN ISO 23145-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007) (Endorsed by AENOR in June of 2016.)
  • UNE-EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012) (Endorsed by AENOR in June of 2016.)
  • UNE-EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity (Endorsed by Asociación Española de Normalización in January of 2019.)
  • UNE-EN 772-4:1999 METHODS OF TEST FOR MASONRY UNITS - PART 4: DETERMINATION OF REAL AND BULK DENSITY AND OF TOTAL AND OPEN POROSITY FOR NATURAL STONE MASONRY UNITS
  • UNE-EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
  • UNE-EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in December of 2018.)

Military Standard of the People's Republic of China-General Armament Department, Detection of Bulk Density

  • GJB 772.113-1994 Test methods for explosives - Wet method for determination of bulk density
  • GJB 772.114-1994 Test methods for explosives - Dry method for determination of bulk density
  • GJB 771.101-1989 Gunpowder Performance Test Methods Determination of Bulk Density
  • GJB 8683.5-2015 Test methods for physical parameters of pyrotechnics Part 5: Determination of bulk density using glass measuring cylinder method
  • GJB 8683.4-2015 Test methods for physical parameters of pyrotechnics Part 4: Standard graduated cylinder method for determination of bulk density

Professional Standard - Commodity Inspection, Detection of Bulk Density

  • SN/T 2712-2010 General method for import and export chemicals.Determination of bulk density
  • SN/T 0481.6-1995 Methods for inspection of bauxite for export.Rapid determination of bulk density of alumina1995-09-06

Professional Standard - Agriculture, Detection of Bulk Density

  • 128药典 四部-2020 0900 Property Inspection Method 0993 Bulk Density and Tap Density Determination Method

The American Road & Transportation Builders Association, Detection of Bulk Density

  • AASHTO T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
  • AASHTO T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
  • AASHTO T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
  • AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

AASHTO - American Association of State Highway and Transportation Officials, Detection of Bulk Density

  • T 19M/T 19-2009 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
  • T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
  • T19/T19M-2000 "Standard Method of Test for Bulk Density (""Unit Weight"") and Voids in Aggregate (Twentieth Edition; ASTM C29/C29M-97)"

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Detection of Bulk Density

  • GJB 5891.2-2006 Test method of loading material for initiating explosive device Part 2: Measurement of bulk density
  • GJB 5382.4-2005 Test methods of physical parameter for pyrotechnic. Part 4: Determination of bulk density. Standard measuring cylinder method
  • GJB 5382.5-2005 Test methods of physical parameter for pyrotechnic. Part 5: Determination of bulk density. Glass measuring cylinder method

国家能源局, Detection of Bulk Density

  • SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst carriers by mechanical tapping

AT-ON, Detection of Bulk Density

  • ONORM S 7021-1983 Testing of leather; determination of bulk density Essai de cuir; determination de la masse volumique apparente
  • OENORM EN 12697-7-2021 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
  • ONORM M 9440-1996 Dispersion of pollutants in the atmosphere - Calculation of ambient air concentrations and determination of Stack heights

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Detection of Bulk Density

  • GB/T 33207-2016 Non-destructive testing—Test method for the accumulation of oxide scale in the metal tube in service by magnetic testing
  • GB/T 35463-2017 Test method for bulk density of wood-plastic composites and products

Professional Standard - Tobacco, Detection of Bulk Density

  • YC/T 473-2013 Determination of apparent density,true density and inner pore volume of cut tobacco

CL-INN, Detection of Bulk Density

Professional Standard - Forestry, Detection of Bulk Density

  • LY/T 1405-1999 Laminated wood plastics.Compreg Determination of density

PL-PKN, Detection of Bulk Density

BE-NBN, Detection of Bulk Density

NL-NEN, Detection of Bulk Density

  • NEN 5927-1990 Aggregates for concrete - Determination of bulk density
  • NEN 2619-1981 Shaped insulating refractory products - Determination of bulk density

KR-KS, Detection of Bulk Density

Professional Standard - Non-ferrous Metal, Detection of Bulk Density

  • YS/T 587.10-2006 Calcined coke for prebaked blocks. Testing methods. Part 10: Determination of bulk density (tapped)

American National Standards Institute (ANSI), Detection of Bulk Density

CENELEC - European Committee for Electrotechnical Standardization, Detection of Bulk Density

  • EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity@ density and stacking factor of electrical steel strip and sheet

SE-SIS, Detection of Bulk Density

  • SIS SS 16 11 43-1982 Plastics - Determination of apparent bulk density of compacted moulding material
  • SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio

ES-AENOR, Detection of Bulk Density

(U.S.) Ford Automotive Standards, Detection of Bulk Density

  • FORD FLTM EU-BS 050-2-2000 DETERMINATION OF DENSITY AND THICKNESS OF BOARDS AND WEIGHT PER UNIT AREA OF COATED BOARDS
  • FORD FLTM BQ 103-06-2000 MEASUREMENT OF CRACK DENSITY OF MICRO-CRACKED OR PORE DENSITY OF MICRO-POROUS ELECTRODEPOSITED CHROMIUM (Replaces FLTM BQ 003-06)
  • FORD FLTM EU-BS 050-02-2000 DETERMINATION OF DENSITY AND THICKNESS OF BOARDS AND WEIGHT PER UNIT AREA OF COATED BOARDS

PH-BPS, Detection of Bulk Density





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved