ZH
RU
ES

Tensile testing machine standard sheet

Tensile testing machine standard sheet, Total:494 items.

In the international standard classification, Tensile testing machine standard sheet involves: Products of the textile industry, Plastics, Earthworks. Excavations. Foundation construction. Underground works, Semiconductor devices, Electromechanical components for electronic and telecommunications equipment, Pipeline components and pipelines, Testing of metals, Wood-based panels, Inorganic chemicals, Headgear. Clothing accessories. Fastening of clothing, Mechanical testing, Agricultural machines, implements and equipment, Glass, Elements of buildings, Surface treatment and coating, Adhesives, Ceramics, Sports equipment and facilities, Structures of buildings, Medical sciences and health care facilities in general, Measurement of force, weight and pressure, Construction materials, Road vehicles in general, Analytical chemistry, Fasteners, Soil quality. Pedology, Packaging materials and accessories, Paints and varnishes, Hydraulic fluids, Rubber and plastics products, Protection of and in buildings, Iron and steel products, Lubricants, industrial oils and related products, Lubrication systems, Aerospace electric equipment and systems, Vocabularies, Aerosol containers, Air quality, Protection against crime, Switchgear and controlgear, Aircraft and space vehicles in general, Non-destructive testing, Packaging and distribution of goods in general, Office machines, Paint ingredients, Materials for aerospace construction, Accident and disaster control, Rubber, Reinforced plastics, Rotating machinery, Footwear, Occupational safety. Industrial hygiene, Paint coating processes, Sterilization and disinfection, Products of the chemical industry, Storing. Warehousing, Non-ferrous metals, Internal combustion engines for road vehicles, Measurement of volume, mass, density, viscosity, Industrial automation systems, Protective equipment, Structure and structure elements, Hospital equipment, Water quality, Photography, Electricity. Magnetism. Electrical and magnetic measurements, Hinges, eyelets and other articulated joints.

IT-UNI, Tensile testing machine standard sheet

American Society for Testing and Materials (ASTM), Tensile testing machine standard sheet

ASTM D4964-96(2012) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D4964-96(2012)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D4964-96(2004) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D3107-07e1 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D3107-07(2011) Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D3107-07(2015) Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D5026-06(2014)e1 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM D4435-04 Standard Test Method for Rock Bolt Anchor Pull Test
ASTM D4435-84(1998) Standard Test Method for Rock Bolt Anchor Pull Test
ASTM D4435-08 Standard Test Method for Rock Bolt Anchor Pull Test
ASTM D4435-13 Standard Test Method for Rock Bolt Anchor Pull Test
ASTM D4435-13e1 Standard Test Method for Rock Bolt Anchor Pull Test
ASTM D4964-96(2008)e2 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D2731-07(2012) Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D2731-07 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D2731-15 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D3107-07 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM F1588-96(2007) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
ASTM F1588-96(2019) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
ASTM D3500-90(2003) Standard Test Methods for Structural Panels in Tension
ASTM C749-92(1996) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-92(2002) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D5344-22 Standard Test Method for Extension Force of Partially Oriented Yarn
ASTM C749-08 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-08(2010)e1 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D2059/D2059M-03(2014) Standard Test Method for Resistance of Zippers to Salt Spray 40;Fog41;
ASTM C749-13 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D2653-07(2018) Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D76/D76M-21 Standard Specification for Tensile Testing Machines for Textiles
ASTM D76/D76M-11(2016) Standard Specification for Tensile Testing Machines for Textiles
ASTM E1824-09 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM D2653-01 Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D2653-07(2012) Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM E519-07 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM D2653-07 Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D5179-02 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
ASTM E519/E519M-15 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM E1824-09e1 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM D5179-16(2021) Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D897-01 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D897-00 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D897-01e1 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D897-08 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM C749-15(2020) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-15 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D2731-01 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM C565-93(1998) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM C565-15(2021) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM C565-15 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM D5179-98 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
ASTM D5179-02(2008) Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
ASTM E4-02 Standard Practices for Force Verification of Testing Machines
ASTM E4-20 Standard Practices for Force Verification of Testing Machines
ASTM E4-21 Standard Practices for Force Verification of Testing Machines
ASTM E4-10 Standard Practices for Force Verification of Testing Machines
ASTM D2370-98(2010) Standard Test Method for Tensile Properties of Organic Coatings
ASTM D2370-98(2002)e1 Standard Test Method for Tensile Properties of Organic Coatings
ASTM D76/D76M-11 Standard Specification for Tensile Testing Machines for Textiles
ASTM D2370-16(2021) Standard Test Method for Tensile Properties of Organic Coatings
ASTM D2370-16 Standard Test Method for Tensile Properties of Organic Coatings
ASTM C1273-05 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM C1273-05(2010) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM E1824-02 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
ASTM E1824-96 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D7401-08 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
ASTM D1708-06 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D1708-06a Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D7234-21 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM E4-16 Standard Practices for Force Verification of Testing Machines
ASTM C1568-08(2020) Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
ASTM D2261-11 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D2261-13 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM E74-04 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E4-15 Standard Practices for Force Verification of Testing Machines
ASTM E4-14 Standard Practices for Force Verification of Testing Machines
ASTM E4-13 Standard Practices for Force Verification of Testing Machines
ASTM D2731-21 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM C496-96 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
ASTM C496/C496M-11 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
ASTM E2206-06 Standard Test Method for Force Calibration Of Thermomechnical Analyzers
ASTM E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E74-00a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM D5034-09(2013) Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D5648-01 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D5648-94 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D5648-01(2008) Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D6706-01(2013) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
ASTM C565-93(2010)e1 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM D5397-07 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM D5397-99 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM D5397-07(2012) Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM F2634-10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D4998-95 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
ASTM D4998-11 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
ASTM D4998-13(2021) Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
ASTM D3107-03 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D2919-01(2007) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D6706-01(2007) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
ASTM D6706-01 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
ASTM D2919-00 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D2919-01e1 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D2919-01 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D8363-20 Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
ASTM D2919-01(2014) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D5591-04 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D4541-17 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM F2634-07 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM E2359/E2359M-13(2023) Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
ASTM D8106-17 Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
ASTM D5591-98a Standard Test Method for Thermal Shrinkage Force of Yarn and Cord Using the Testrite Thermal Shrinkage Force Tester
ASTM D5591-02 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-04(2016) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-04(2011) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D2838-18 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
ASTM A1032-04 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
ASTM A1032-04(2010) Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
ASTM A1032-15(2019) Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
ASTM A1032-15 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
ASTM D5279-99 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
ASTM D5279-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
ASTM D5279-08 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
ASTM D7234-12 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D7755-11(2017) Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D4964-96(2008)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D6295/D6295M-98 Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
ASTM D6295/D6295M-98(2019) Standard Test Method for Dispensability of Light–Duty Pressure–Sensitive Film Tape
ASTM F1225-99(2008) Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
ASTM D7217-05 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7217-11 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM E74-01 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E74-02 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E74-06 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E74-13a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM D7556-10 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
ASTM E1012-14e1 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM E1012-19 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D5648-01(2014) Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners 40;Lubricity41;
ASTM B905-00(2021) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
ASTM D5397-19a Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM D5397-99(2005) Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM D5397-19 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM D5397-99e1 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM D5397-20 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM B905-00(2005) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
ASTM B905-00(2010) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
ASTM D6534-00 Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
ASTM D7036-16 Standard Practice for Competence of Air Emission Testing Bodies
ASTM E3278-21 Standard Test Method for Bubble Point Pressure of Woven Wire Filter Cloth
ASTM D5279-13 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
ASTM E1012-05 Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D5735-95 Standard Test Method for Tearing Strength on Nonwoven Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D3807-98(2012) Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
ASTM F842-04 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
ASTM D2294-96(2002) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D2294-96 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D2919-01(2023) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D2294-96(2008) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D6381-00 Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance
ASTM D6381-00a Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance
ASTM D4473-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM D4473-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM D4473-03 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM D6381-03 Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance
ASTM D4473-08 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM D6381-03a Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance
ASTM D6381/D6381M-15(2020) Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance
ASTM F2242-05(2018) Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft
ASTM D4473-08(2016) Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM D2261-96 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D2261-96(2002) Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D2261-07ae1 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D5179-16 Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM E1012-12 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM E1012-12e1 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM E1012-14 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM E2428-08 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
ASTM D4335-99(2006) Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
ASTM D4440-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology
ASTM D4335-99 Standard Test Method for the Determination of the Component Retention of a Mechanical Pump Dispenser
ASTM D6534-05 Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
ASTM D6534-05(2010) Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
ASTM F1050-87(2000)e1 Standard Test Method for Determining Winding Torque and Tension of Typewriter Ribbons
ASTM F1050/F1050M-87(2010)e1 Standard Test Method for Determining Winding Torque and Tension of Typewriter Ribbons
ASTM D4440-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology
ASTM D4335-99(2010) Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
ASTM D2197-10 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D2197-98 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D2197-16(2022) Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D2197-16 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D4440-15 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
ASTM C1028-07 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM F606-10 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F606-10a Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F606-11 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM D5459-95(2007) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D1002-10 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D5735-95(2001) Standard Test Method for Tearing Strength on Nonwoven Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D2261-13(2017) Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D5459-95 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D5459-95(2001) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D5459-95(2020) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D4334-99 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
ASTM D4334-05 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
ASTM D6991-17(2022) Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM D2261-13(2017)e1 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D3528-96(2008) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D3022-84(2011) Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
ASTM E3408/E3408M-23 Standard Test Method for Evaluating Ground Response Robot Capabilities: Dexterity: Linear Inspection
ASTM D3518/D3518M-94(2007) Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a 177;45176; Laminate
ASTM D6991-17 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM E2853-12(2021) Standard Test Method for Evaluating Emergency Response Robot Capabilities: Human-System Interaction (HSI): Search Tasks: Random Mazes with Complex Terrain
ASTM E2853/E2853M-22 Standard Test Method for Evaluating Ground Response Robot Capabilities: Search Tasks
ASTM D6991-05 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM D6991-17e1 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM D945-06(2012) Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D945-16 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D906-98(2004) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D7332/D7332M-09 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D906-98(2011) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D906-98 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D7853-13 Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
ASTM D7093-04 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
ASTM E1824-13 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM D4684-99e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-20 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-18 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-07e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-17a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-17 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D3518/D3518M-13 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a plusmn;45deg; Laminate
ASTM C1291-00a Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM C1291-00 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM C1291-00a(2005) Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM C1291-00a(2010) Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM D2261-07 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D2261-07a Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D5706-97(2002)e1 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D5706-97 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D5859-96 Standard Test Method for Determining the Traction of Footwear on Painted Surfaces Using the Variable Incidence Tester
ASTM D7421-08 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7217-05(2010)e1 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D5706-05(2011)e1 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D5706-11 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7421-11 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7234-22 Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D7563-10(2016) Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
ASTM C1860-23b Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23ce1 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM D7853-13(2020) Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
ASTM C1404/C1404M-98(2003) Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
ASTM D5418-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM D5418-99 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM D4684-07 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM F945-06 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM F945-98 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM F945-01 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM E1153-03(2010)e1 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate Non-Food Contact Surfaces
ASTM F945-12(2019) Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM D6991-05(2010) Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM F945-22 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM D7563-10 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
ASTM D7563-23 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
ASTM D5331-03 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
ASTM F2824-10 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM F2824-10e1 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM D1002-05 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002-99 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002-01 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM C1028-96 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM D3983-98(2011) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM C1568-05 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C1568-04 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
ASTM E3097-17 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
ASTM D6896-03(2007) Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM F945-12 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM D3003-01(2022) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM D2272-22 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D2272-11 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D6896-20 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-17 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-18 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D7217-22 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM C1581-04 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1581/C1581M-09a Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM D6894-03 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D6894-13 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D8047-19e1 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM F2106-02 Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
ASTM C1568-03 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
ASTM D3003-94 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM D3003-01 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM C501-84(2002) Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
ASTM F2106-03 Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
ASTM D3003-01(2006) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM F2106-01 Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
ASTM F2106-12 Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
ASTM D3702-94(1999) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
ASTM D3702-94(2019) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
ASTM D6618-10a Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
ASTM D5862-99a Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine
ASTM E2829-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Maneuvering Tasks: Sustained Speed
ASTM E2830-11 Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks: Grasped Sleds
ASTM D3003-01(2012) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM E2854-12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Line-of-Sight Range
ASTM D4684-14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D8047-16 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM E3349/E3349M-22 Standard Test Method for Evaluating Ground Robot Capabilities and Remote Operator Proficiency: Terrains: K-Rails
ASTM F1819-07(2013) Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
ASTM C1581/C1581M-18 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1581/C1581M-18a Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1581/C1581M-09 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1581/C1581M-16 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM D5656-10(2017) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM E2853-12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Human-System Interaction (HSI): Search Tasks: Random Mazes with Complex Terrain
ASTM D6894-11 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D6896-03 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM E2170-01 Standard Test Method for Determining Anaerobic Biodegradation Potential of Organic Chemicals Under Methanogenic Conditions
ASTM F1819-03 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
ASTM F1819-04 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
ASTM F1819-98 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
ASTM C1568-08 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
ASTM E1625-94(2001) Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)
ASTM D6896-12 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6896-03e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM E1625-94(2008) Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)
ASTM C1568-08(2013) Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
ASTM D5656-10 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM F2296-04 Standard Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress: Four Different Test Methods-Score/Tape, Cross Hatch, X-Cut, and Crease-Folding
ASTM F2296-03 Standard Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress: Four Different Test Methods-Score/Tape, Cross Hatch, X-Cut, and Crease-Folding
ASTM D4970-05(2007)e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester)
ASTM D4970-07 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
ASTM D7594-16 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7594-19 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D8047-23 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D5656-04 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D5656-04e1 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM E2828-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Symmetric Stepfields
ASTM A932/A932M-01(2006) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
ASTM A932/A932M-01(2012) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
ASTM D4970-02 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textiles Fabrics (Martindale Pressure Tester Method)
ASTM D4970-05 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textiles Fabrics (Martindale Pressure Tester Method)
ASTM D4970-99 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textiles Fabrics (Martindale Pressure Tester Method)
ASTM E1720-95 Standard Test Method for Determining Ready, Ultimate, Biodegradability of Organic Chemicals in a Sealed Vessel CO₂ Production Test
ASTM E1720-01 Standard Test Method for Determining Ready, Ultimate, Biodegradability of Organic Chemicals in a Sealed Vessel CO₂ Production Test
ASTM D7420-18 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7420-17 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7594-10 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7594-11 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

European Committee for Electrotechnical Standardization（CENELEC）, Tensile testing machine standard sheet

EN 62047-3:2006 Semiconductor devices - Micro-electromechanical devices Part 3: Thin film standard test piece for tensile testing

Association Francaise de Normalisation, Tensile testing machine standard sheet

NF C96-050-3*NF EN 62047-3:2006 Semiconductor devices - Micro-electromechanical devices - Part 3 : thin film standard test piece for tensile testing
NF U02-211*NF EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria.
NF U02-211:2007 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria.
NF EN ISO 5674:2009 Tracteurs et matériels agricoles et forestiers - Protecteurs d'arbres de transmission à cardans de prise de force - Essais de résistance mécanique et d'usure et critères d'acceptation
NF P85-508:1991 Building construction. Jointing products. Sealants. Determination of tensile properties at maintained extension.
NF P18-165*NF EN 524-5:1997 Steel strip sheaths for prestressing tendons. Test methods. Part 5 : determination of tensile load resistance.
NF U02-083-2*NF ISO 5721-2:2014 Agricultural tractors - Requirements, test procedures and acceptance criteria for the operator's field of vision - Part 2 : Field of vision to the side and to the rear
NF ISO 5721-1:2013 Tracteurs agricoles - Exigences, modes opératoires d'essai et critères d'acceptation relatifs au champ de visibilité du conducteur - Partie 1 : champ de visibilité vers l'avant
NF ISO 5721-2:2014 Tracteurs agricoles - Exigences, modes opératoires d'essai et critères d'acceptation relatifs au champ de visibilité du conducteur - Partie 2 : Champ de vision latéral et vers l'arrière

International Electrotechnical Commission (IEC), Tensile testing machine standard sheet

IEC 62047-3:2006 Semiconductor devices - Micro electromechanical devices - Part 3: Thin film standard test piece for tensile-testing

German Institute for Standardization, Tensile testing machine standard sheet

DIN EN 62047-3:2007 Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile-testing (IEC 62047-3:2006); German version EN 62047-3:2006
DIN EN ISO 5674:2007 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01); German version EN ISO 5674:2006
DIN EN ISO 7500-1:2018-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018); German version EN ISO 7500-1:2018
DIN EN ISO 7500-1 Beiblatt 4:2013-03 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system; Supplement 4: Information for taking the uncertainty into account regardi...
DIN EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
DIN EN ISO 7500-1 Bb.3:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing mac
DIN EN ISO 7500-1 Bb.2:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing mach
DIN EN ISO 7500-1 Beiblatt 1:2022-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 1: General for requirements, calibration and ...
DIN EN 62047-3:2007-02 Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile-testing (IEC 62047-3:2006); German version EN 62047-3:2006
DIN EN ISO 7500-1 Beiblatt 2:2021 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 2: General for requirements, verification and calibration of spr
DIN EN ISO 7500-1 Bb.3:2012 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 3: General information for requirements, verification and calibr
DIN EN ISO 7500-1 Beiblatt 3:2023-03 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 3: General information for requirements, veri...
DIN EN ISO 7500-1 Beiblatt 2:2022-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 2: General for requirements, verification and...
DIN EN ISO 7500-1:2016 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2015); German version EN ISO 7500-1:2015
DIN EN ISO 7500-1 Beiblatt 4:2013 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system; Supplement 4: Information for taking the uncertainty into account regarding
DIN EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011); German version EN ISO 376:2011
DIN EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004); English version of DIN EN ISO 5674:2009-06
DIN EN ISO 16276-1:2007-08 Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007); German version EN ISO 16276-1:2007

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tensile testing machine standard sheet

GB/T 16825.1-2002 Verification of static uniaxial testing machines--Part 1: Tension/compression testing machines--Verification and calibration of the force-measuring system
GB/T 16825.1-2008 Inspection of static uniaxial testing machines - Part 1: Inspection and calibration of force measuring systems of tensile and/or compressive testing machines
GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part1:Tension/compression testing machines—Calibration and verification of the force-measuring system
GB/T 13634-2008 Calibration of force-proving instruments used for the verification of uniaxial testing machines

International Organization for Standardization (ISO), Tensile testing machine standard sheet

ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
ISO 5674:2004 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria
ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
ISO 7500-1:2015 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
ISO/DIS 5674:2023 Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria
ISO/PRF 5674:2023 Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria
ISO/FDIS 5674:2023 Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria
ISO 4965:1979 Axial load fatigue testing machines; Dynamic force calibration; Strain gauge technique

AASHTO - American Association of State Highway and Transportation Officials, Tensile testing machine standard sheet

T 67-2008 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
T 67-2005 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
T 67-2004 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (ASTM Designation: E 4-02)
T 67-2003 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (ASTM Designation: E 4-01)
T 67-2000 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (Twentieth Edition; ASTM E4-98a)
TP10-1993 Standard Test Method for Thermal Stress Restrained Specimen Tensile Strength (2000 Edition)
T 67-1996 Standard Specification for Standard Practices for Force Verification of Testing Machines (Eighteenth Edition; ASTM E4-94)
T 67-1997 Standard Specification for Standard Practices for Force Verification of Testing Machines (Nineteenth Edition; ASTM E4-96)

Japanese Industrial Standards Committee (JISC), Tensile testing machine standard sheet

JIS B 7721:2002 Verification and calibration of the force measuring system of the tension/compression testing machines

American National Standards Institute （ANSI), Tensile testing machine standard sheet

ANSI/ASAE S522.1-2005 Tractors and machinery for agricultural and forestry - Guards for power take-off (PTO) drive shafts - Strength and wear tests and acceptance criteria
ANSI/ASAE S522.1 (ISO 5674:2004):2005 Tractors and machinery for agricultural and forest - Guards for power take-off (PTO) drive shafts - Strength and wear tests and acceptance criteria
ANSI/ASTM C749:2015 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ANSI/ASTM D7542:2009 Test Method For Standard Test Method For Air Oxidation Of Carbon And Graphite In The Kinetic Regime
ANSI/SPRI IA-1-2010 Standard Field Test Procedure for Determining the Mechanical Uplift Resistance of Insulation Adhesive over Various Substrates

Korean Agency for Technology and Standards (KATS), Tensile testing machine standard sheet

KS B ISO 5674:2007 Tractors and machinery for agriculture and forestry－Guards for power take-off(PTO) drive-shafts－Strength and wear tests and acceptance criteria
KS B ISO 5674-2007(2017) Tractors and machinery for agriculture and forestry－Guards for power take-off(PTO) drive-shafts－Strength and wear tests and acceptance criteria
KS B ISO 7500-1-2003(2008) Metallic materials－Verification of static uniaxial testing machines－Part 1：Tension/compression testing machines－Verification and calibration of the force-measuring system
KS B ISO 5721-1:2018 Agricultural tractors — Requirements, test procedures and acceptance criteria for the operator’s field of vision — Part 1: Field of vision to the front
KS M ISO 16276-1-2013(2018) Corrosion protection of steel structures by protective paint systems ㅡ Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating ㅡ Part 1: Pull-off testing
KS B ISO 5721-2:2018 Agricultural tractors — Requirements, test procedures and acceptance criteria for the operator’s field of vision — Part 2: Field of vision to the side and to the rear

Group Standards of the People's Republic of China, Tensile testing machine standard sheet

T/CGCPU 003-2019 Clinical Trial Institution Capacity Evaluation Standards

RU-GOST R, Tensile testing machine standard sheet

GOST ISO 5674-2012 Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive shafts. Strength and wear tests and acceptance criteria
GOST 12.2.002.1-1991 Occupational safety standards system. Agricultural and forest wheel tractors. Method of dynamic testing of safety structures
GOST R 12.4.255-2011 Occupation safety standards system. Personal hearing protective equipment. General technical requirements. Mechanical test methods

Danish Standards Foundation, Tensile testing machine standard sheet

DS/EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria
DS/EN ISO 7500-1/AC:2009 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
DS/EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
DS/EN 62047-3:2007 Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile testing
DS/ISO 5721-1:2013 Agricultural tractors - Requirements, test procedures and acceptance criteria for the operator's field of vision - Part 1: Field of vision to the front
DS/EN ISO 16276-1:2007 Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing

The American Road & Transportation Builders Association, Tensile testing machine standard sheet

AASHTO T 322-2007 Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) Using the Indirect Tensile Test Device
AASHTO T67-2000 Standard Method of Test for Standard Practices for Force Verification of Testing Machine Twentieth Edition; ASTM E4-98a
AASHTO TP10-1993 Standard Test Method for Thermal Stress Restrained Specimen Tensile Strength 2000 Edition; Interim Edition 4/2001 R(1996)
AASHTO TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension 2000 Edition; Interim Edition 4/2001

未注明发布机构, Tensile testing machine standard sheet

DIN EN ISO 7500-1 Beiblatt 1:1999 Testing of testing machines for static uniaxial loading Part 1: Tensile and compression testing machines Testing and calibration of the force measuring device General information on requirements and the testing and calibration of tensile, compression and
ISO 5674:2004/Amd 1:2005 Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria
DIN EN 10002-3 Beiblatt 1:1994 Metallic materials tensile test Part 3: Calibration of force gauge data for testing testing machines with uniaxial loading Notes on application

European Committee for Standardization (CEN), Tensile testing machine standard sheet

EN 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
EN 10002-3:1994 Metallic Materials - Tensile Test - Part 3: Calibration of Force Proving Instruments Used for the Verification of Uniaxial Testing Machines
prEN ISO 5674 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO/DIS 5674:2022)
EN ISO 5674:2004 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria ISO 5674:2004
EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

British Standards Institution (BSI), Tensile testing machine standard sheet

BS EN ISO 7500-1:2018 Tracked Changes. Metallic materials. Calibration and verification of static uniaxial testing machines. Tension/compression testing machines. Calibration and verification of the force-measuring system
BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS EN ISO 7500-1:2015 Metallic materials. Calibration and verification of static uniaxial testing machines. Tension/compression testing machines. Calibration and verification of the force-measuring system
BS EN ISO 7500-1:2004 Metallic materials. Verification of static uniaxial testing machines. Tension/compression testing machines. Verification and calibration of the force-measuring system
BS EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria
BS ISO 5721-2:2014 Agricultural tractors. Requirements, test procedures and acceptance criteria for the operator’s field of vision. Field of vision to the side and to the rear
22/30409841 DC BS EN ISO 5674. Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria

ES-UNE, Tensile testing machine standard sheet

UNE-EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)

SG-SPRING SG, Tensile testing machine standard sheet

SS 323-C1-2013 Methods of test for flexible plastic packaging materials.Part C1: Standard test method for tensile properties of thin plastic sheeting

TH-TISI, Tensile testing machine standard sheet

TIS 285.50-2006 Standard test methods for paints, varnishes and related materials.part 50: adhesion-pull-off test
TIS 121.16-2010 Standard test methods for textiles.part 16: tensile properties of fabrics.determination of maximum force using the grab method
TIS 121.9-2009 Standard test methods for tex tiles.part 9: tensile properties of fabrics.determination of maximum force and elongation at maximum force using the strip method
TIS 121.17-2010 Standard test methods for textiles.part 17: determination of tear force of fabrics using constant rate of extension testing machine

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Tensile testing machine standard sheet

PREN 2002-3-1975 Test Methods for Metallic Materials Part 3 Load Calibration of Tensile Testing Machines Aerospace Series (Edition 1)

国家市场监督管理总局、中国国家标准化管理委员会, Tensile testing machine standard sheet

GB/T 13634-2019 Metallic materials—Calibration of force-proving instruments used for the verification of uniaxial testing machines

KR-KS, Tensile testing machine standard sheet

KS B ISO 5674-2022 Tractors and machinery for agriculture and forestry — Guards for power take-off(PTO) drive-shafts — Strength and wear tests and acceptance criteria
KS B 5544-2003(2023)
KS B ISO 5721-1-2018 Agricultural tractors — Requirements, test procedures and acceptance criteria for the operator’s field of vision — Part 1: Field of vision to the front
KS B ISO 5721-1-2018(2023) Agricultural tractors — Requirements, test procedures and acceptance criteria for the operator’s field of vision — Part 1: Field of vision to the front
KS B ISO 5721-2-2018 Agricultural tractors — Requirements, test procedures and acceptance criteria for the operator’s field of vision — Part 2: Field of vision to the side and to the rear
KS B ISO 5721-2-2018(2023) Agricultural tractors — Requirements, test procedures and acceptance criteria for the operator’s field of vision — Part 2: Field of vision to the side and to the rear

ZA-SANS, Tensile testing machine standard sheet

SANS 7500-1:2009 Metallic materials - Verification of static uniaxial testing machines Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system

AENOR, Tensile testing machine standard sheet

UNE 68005-1:1986 AGRICULTURAL TRACTORS. POWER TAKE-OFF POWER AND STANDARDIZED TEST FOR FUEL CONSUMPTION. TEST METHODS
UNE-EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

Standard Association of Australia （SAA）, Tensile testing machine standard sheet

AS 1121.4:2007 Agricultural tractor power take-offs - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria

SAE - SAE International, Tensile testing machine standard sheet

SAE J1041-1983 Brake Test Procedure and Brake Performance Criteria for Agricultural Equipment
SAE J1041-1991 Braking System Test Procedures and Braking Performance Criteria for Agricultural Tractors
SAE AS5900C-2016 Standard Test Method for Aerodynamic Acceptance of AMS1424 and AMS1428 Aircraft Deicing/Anti-Icing Fluids
SAE AS5900-2003 Standard Test Method for Aerodynamic Acceptance of SAE AMS 1424 and SAE AMS 1428 Aircraft Deicing/anti-Icing Fluids

IN-BIS, Tensile testing machine standard sheet

IS 10792-1984

Society of Automotive Engineers (SAE), Tensile testing machine standard sheet

SAE J1041-1992 Braking System Test Procedures and Braking Performance Criteria for Agricultural Tractors
SAE AS5900D-2020 Standard Test Method for Aerodynamic Acceptance of AMS1424 and AMS1428 Aircraft Deicing/Anti-Icing Fluids
SAE AS5900E-2021 Standard Test Method for Aerodynamic Acceptance of AMS1424 and AMS1428 Aircraft Deicing/Anti-Icing Fluids
SAE AS5900A-2003 Standard Test Method for Aerodynamic Acceptance of SAE AMS 1424 and SAE AMS 1428 Aircraft Deicing/Anti-Icing Fluids
SAE AS5900B-2007 (R) Standard Test Method for Aerodynamic Acceptance of SAE AMS 1424 and SAE AMS 1428 Aircraft Deicing/Anti-icing Fluids

Lithuanian Standards Office , Tensile testing machine standard sheet

LST EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004)
LST EN ISO 7500-1:2004/AC:2009 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004/Cor 1:2008)
LST EN 62047-3-2007 Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile testing (IEC 62047-3:2006)
LST EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

European Association of Aerospace Industries, Tensile testing machine standard sheet

AECMA PREN 2002-3-1975 Test Methods for Metallic Materials Part 3 Load Calibration of Tensile Testing Machines Aerospace Series Edition 1

Electronic Components, Assemblies and Materials Association, Tensile testing machine standard sheet

ECA 448-4-1980 Standard Test Methods for Electromechanical Switches (Test Methods for Logic (TTL) Level Endurance and Low Level Endurance)

CEN - European Committee for Standardization, Tensile testing machine standard sheet

EN ISO 5674:2006 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (Corrected 2005-07-01)

Institute of Electrical and Electronics Engineers (IEEE), Tensile testing machine standard sheet

IEEE 421.3-1997 Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines

ES-AENOR, Tensile testing machine standard sheet

UNE 68-005 Pt.1-1986

Professional Standard - Railway, Tensile testing machine standard sheet

TB/T 2360-1993 Appraisal method and evaluation standard for dynamic performance test of railway locomotive

Xinjiang Provincial Standard of the People's Republic of China, Tensile testing machine standard sheet

DB65/T 2220.1-2005 Installation test check and acceptance standard of grid connected stall regylation wind turbine generator system Part1:cheeck and factory test
DB65/T 2220.2-2005 Installation test check and acceptance standard of grid connected stall regylation wind turbine generator system Part2:500 hours cimmissioning regulation

GOSTR, Tensile testing machine standard sheet

GOST ISO 5721-1-2016 Agricultural tractors. Requirements, test procedures and acceptance criteria for the operator's field of vision. Part 1. Field of vision to the front
GOST ISO 5721-2-2016 Agricultural tractors. Requirements, test procedures and acceptance criteria for the operator's field of vision. Part 2. Field of vision to the side and to the rear

(U.S.) Ford Automotive Standards, Tensile testing machine standard sheet

FORD ESE-M4C91-A-2004 GASOLINE, UNLEADED, REGULAR GRADE, DYNAMOMETER AND ENGINE PLANT HOT TESTING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESE-M4C90-A
FORD ESE-M4C91-A-2008 GASOLINE, UNLEADED, REGULAR GRADE, DYNAMOMETER AND ENGINE PLANT HOT TESTING ***TO BE USED WITH FORD WSS-M99P1111-A***