ZH
RU
ES

Iron oxide surface

Iron oxide surface, Total:500 items.

In the international standard classification, Iron oxide surface involves: Powder metallurgy, Inorganic chemicals, Insulating fluids, Audio, video and audiovisual engineering, Paint ingredients, Surface treatment and coating, Products of the chemical industry, Conducting materials, Components for electrical equipment, Magnetic materials, Construction materials, Ferrous metals, Testing of metals, Iron and steel products, Glass, AIRCRAFT AND SPACE VEHICLE ENGINEERING, Ceramics, Analytical chemistry, Aircraft and space vehicles in general, Graphic technology, Non-ferrous metals, Pipeline components and pipelines, Nuclear energy engineering, Metalliferous minerals, Non-metalliferous minerals, Paints and varnishes, Manufacturing processes in the rubber and plastics industries, Linear and angular measurements, Rubber and plastics products, CONSTRUCTION MATERIALS AND BUILDING, Mechanical testing, Products of non-ferrous metals, Sterilization and disinfection, Road vehicle systems, Rubber, Lubricants, industrial oils and related products, Materials for aerospace construction.


IN-BIS, Iron oxide surface

(U.S.) Ford Automotive Standards, Iron oxide surface

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Iron oxide surface

  • GB/T 24244-2009 Iron oxide for ferrite
  • GB/T 24244-2009(英文版) lron oxide for ferrite
  • GB 1861-1980 Ferric oxide black
  • GB 6755-1986 Micaceous iron oxide
  • GB/T 1863-2008 Iron oxide pigments
  • GB/T 9634.1-2002 Ferrite cores-Guide on the limits of surface irregularities--Part 1: General specification
  • GB/T 1863-1989 Iron oxide red pigments
  • GB/T 9634.2-2002 Ferrite cores--Guide on the limits of surface irregularities--Part 2: RM-cores
  • GB/T 11847-2008 Determination of specific surface area of uranium dioxide power by BET capacity method
  • GB/T 11847-1989 Determination of specific surface area of uranium dioxide powder by multipoint BET method
  • GB/T 21836-2008 Manganous manganic oxide for soft magnetic ferrites
  • GB/T 9634.4-2007 Ferrite cores Guide on the limits of surface irregularities Part 4: Ring-cores
  • GB/T 20505-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • GB 9290-1988 Surface active agents－Technical ethoxylated fatty amines－Methods of analysis
  • GB/T 9290-1988 Surface active agents--Technical ethoxylated fatty amines--Methods of analysis
  • GB/T 29036-2012 Coloring of stainless steel by Oxidation.Specification and test methods
  • GB/T 9290-2008 Surface active agents.Technical ethoxylated fatty amines.Method of analysis
  • GB/T 9489.3-1988 Determinations of Fe2O3,CaO,MgO,Na2O and K2O in alundum powder by atomic absorption spectrophotometry
  • GB/T 9634.3-2002 Ferrite cores--Guide on the limits of surface irregularities--Part 3: ETD-cores and E-cores
  • GB/T 18683-2002 Laser surface hardening of iron and steel parts
  • GB/T 9489.2-1988 Determination of CaO,MgO,SiO2,Fe2O3,TiO2 in alundum powder by ICP-AES

Korean Agency for Technology and Standards (KATS), Iron oxide surface

  • KS M 1315-2017(2022) Ferric oxide for ferrite
  • KS D 0408-1999 General guide on limits of surface irregularities
  • KS M 1315-2012 Ferric oxide for ferrite
  • KS M 1315-2017 Ferric oxide for ferrite
  • KS M 1315-1982 Ferric oxide for ferrite
  • KS C 2210-1987(1997) MAGNETIC IRON OXIDE POWDER
  • KS C 2210-1987 MAGNETIC IRON OXIDE POWDER
  • KS D 0275-1993 Method of measuring surface hardness for nitrided iron and stee1
  • KS C 2210-2002 MAGNETIC IRON OXIDE POWDER
  • KS D 0275-1993(2018)
  • KS C IEC 60424-1:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
  • KS C IEC 60424-2:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
  • KS C IEC 60424-8:2019 Ferrite cores — Guidelines on the limits of surface irregularities — Part 8: PQ-cores
  • KS C IEC 60424-2:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
  • KS D 8304-2013(2018) Electroplated coatings of zinc on iron or steel
  • KS D 8310-2001 Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-destructive measurement by split-beam microscope)
  • KS D 8310-1986 Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-destructive measurement by split-beam microscope)
  • KS C IEC 60424-4:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
  • KS C IEC 60424-2-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
  • KS C IEC 60424-4:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
  • KS E 3016-1993 Determination of ferrous oxide in iron ores
  • KS E 3016-2003(2013) Determination of ferrous oxide in iron ores
  • KS B 0500-2018 Surface working standards of iron and steel
  • KS C IEC 60424-3:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
  • KS C IEC 60424-4-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
  • KS C IEC 60424-1:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
  • KS D 2588-1995 Method for chemical analysis of trimanganese tetroxide for ferrite
  • KS M ISO 6384:2007 Surface active agents－Technical ethoxylated fatty amines－Methods of analysis
  • KS M ISO 6384-2007(2022) Surface active agents－Technical ethoxylated fatty amines－Methods of analysis
  • KS M ISO 6384-2007(2017) Surface active agents－Technical ethoxylated fatty amines－Methods of analysis
  • KS C IEC 60424-1-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
  • KS B ISO 8512-1-2014(2019) Surface plates — Part 1: Cast iron
  • KS E 3016-2003 Determination of ferrous oxide in iron ores
  • KS M ISO 2270:2008 Non-ionic surface N agents-Polyethoxylated derivatives-Iodometric determination of oxyethylene groups
  • KS M ISO 2270-2008(2018) Non-ionic surface active agents－Polyethoxylated derivatives－Iodometric determination of oxyethylene groups
  • KS C IEC 60424-3:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
  • KS D 8310-2001(2016) Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
  • KS D 8310-2001(2021) Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
  • KS M ISO 8008:2003 Aluminium oxide primarily used for the production of aluminium-Determination of specific surface area by nitrogen adsorption-Single-point method
  • KS M ISO 8215-2007(2018) Surface active agents－Washing powders－Determination of total silica content－Gravimetric method

Electronic Components, Assemblies and Materials Association, Iron oxide surface

RO-ASRO, Iron oxide surface

Professional Standard - Electron, Iron oxide surface

Japanese Industrial Standards Committee (JISC), Iron oxide surface

ECIA - Electronic Components Industry Association, Iron oxide surface

  • EIA-944-2013 Surface Mount Ferrite Chip Bead Qualification Specification
  • EIA-944-2002 Surface Mount Ferrite Chip Bead Qualification Specification

United States Navy, Iron oxide surface

PK-PSQCA, Iron oxide surface

International Organization for Standardization (ISO), Iron oxide surface

  • ISO 1248:2006/Cor 1:2007 Iron oxide pigments — Specifications and methods of test — Technical Corrigendum 1
  • ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
  • ISO 2106:1982 Anodizing of aluminium and its alloys; Determination of mass per unit area (surface density) of anodic oxide coatings; Gravimetric method
  • ISO 2106:1982/Amd 1:1983 Anodizing of aluminium and its alloys; determination of surface density of anodic oxide coatings; gravimetric method; amendment 1
  • ISO 1248:1974 Iron oxide pigments for paints
  • ISO 6384:1981 Surface active agents; Technical ethoxylated fatty amines; Methods of analysis
  • ISO 21264:2019 Surface active agents — Detergents — Determination of alkylphenol ethoxylates
  • ISO 14701:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
  • ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption
  • ISO 14701:2011 Surface chemical analysis - X-ray photoelectron spectroscopy - Measurement of silicon oxide thickness
  • ISO 2270:1989 Non-ionic surface active agents; polyethoxylated derivatives; iodometric determination of oxyethylene groups
  • ISO/CD 20289:2017 Surface chemical analysis
  • ISO 8008:1986 Aluminium oxide primarily used for the production of aluminium; Determination of specific surface area by nitrogen adsorption; Single-point method
  • ISO/TS 25138:2019 Surface chemical analysis — Analysis of metal oxide films by glow-discharge optical-emission spectrometry
  • ISO 8215:1985 Surface active agents; Washing powders; Determination of total silica content; gravimetric method

工业和信息化部/国家能源局, Iron oxide surface

  • JB/T 12854-2016 Technical conditions for zirconium oxide conversion treatment on metal surfaces

PT-IPQ, Iron oxide surface

PL-PKN, Iron oxide surface

  • PN BN 6013-02-1966
  • PN C04550 ArkusZ04-1974 Water and waste water Tests for synthetic surface active agents and theirs biochemical oxidation Determination of nonionic poly- ethoxylic synthetic surface active agents by colorimetric method with phosphotungstic acid
  • PN C04550 ArkusZ10-1972 Water and waste water Tests for synthetic surface active agents and theirs biochemical oxidation
  • PN H04155-04-1986 Chemical analysis of silica raw materials and refractory products Determination of iron oxide
  • PN C04550 ArkusZ03-1972 Water and waste waterTests for synthetic surface active agents and theirs biochemical oxidation Determination of nonionic, polyethoxyHc synthetic surface active agents by colorimetric method with ammo- nium cobaltothiocyanate
  • PN-EN IEC 63093-9-2021-01 E Ferrite cores -- Guidelines on dimensions and the limits of surface irregularities -- Part 9: Planar cores (IEC 63093-9:2020)

Taiwan Provincial Standard of the People's Republic of China, Iron oxide surface

British Standards Institution (BSI), Iron oxide surface

  • BS EN 13268:2001 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene
  • BS EN 13268:2001(2004) Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene
  • BS EN 60424-1:2000 Guidance of the limits of surface irregularities of ferrite cores - General specification
  • BS EN 60424-1:2016 Ferrite cores. Guidelines on the limits of surface irregularities. General specification
  • BS EN 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5:Planar-cores
  • BS EN IEC 63093-9:2020 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - Planar cores
  • BS EN 60424-2:1998 Guidance of the limits of surface irregularities of ferrite cores - RM-cores
  • BS EN 60424-3:1999 Guidance of the limits of surface irregularities of ferrite cores - ETD-cores and E-cores
  • BS EN 60424-4:2001 Guidance of the limits of surface irregularities of ferrite cores - Ring cores
  • BS EN 60424-2:2016 Ferrite cores. Guidelines on the limits of surface irregularities. RM-cores
  • BS EN 60424-4:2016 Ferrite cores. Guidelines on the limits of surface irregularities. Ring-cores
  • BS EN 60424-8:2015 Ferrite cores. Guidelines on the limits of surface irregularities. PQ-cores
  • BS EN 1791:1997 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content
  • BS EN IEC 63093-7:2018 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - EER-cores
  • BS EN IEC 63093-4:2019 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - RM-cores
  • BS EN IEC 63093-12:2019 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - Ring-cores
  • BS EN IEC 63093-13:2019 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - PQ-cores
  • BS EN 12836:2002 Surface active agents - Determination of the water number of alkoxylated products
  • BS EN ISO 2106:2011 Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
  • BS EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
  • BS EN ISO 2106:2020 Tracked Changes. Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
  • BS EN IEC 63093-8:2018 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - E-cores
  • BS EN 60424-3:2016 Ferrite cores. Guidelines on the limits of surface irregularities. ETD-cores, EER-cores, EC-cores and E-cores
  • BS EN IEC 63093-1:2020 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - General specification
  • BS EN IEC 63093-3:2020 Ferrite cores. Guidelines on dimensions and the limits of surface irregularities - Half pot-cores made of ferrite for inductive proximity switches
  • BS DD ISO/TS 25138:2011 Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
  • 19/30355099 DC BS EN ISO 2106. Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
  • BS EN ISO 7599:2018 Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
  • BS ISO 14701:2011 Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
  • BS ISO 12800:2017 Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
  • BS 3981:1976 Specification - Iron oxide pigments for paints
  • BS ISO 28340:2013 Combined coatings on aluminium. General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
  • BS ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption
  • BS EN ISO 12800:2019 Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
  • BS 6829 Sec.4.3:1990 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of oxyethylene groups

Association Francaise de Normalisation, Iron oxide surface

  • NF T73-286*NF EN 13268:2001 Suface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts
  • NF C93-340-2*NF EN 60424-2:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2 : RM-cores
  • NF EN 17059:2018 Lignes de traitement de surface et d'anodisation - Prescription de sécurité
  • NF EN 1791:1997 Agents de surface - Oxydes d'alkyldiméthylamine grasses - Détermination de la teneur en oxyde d'amine.
  • NF C93-340-5*NF EN 60424-5:2015 Ferrite cores - Guide on the limits of surface irregularities - Part 5 : planar-cores
  • NF A91-480:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method.
  • NF C93-340-1:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 1 : general specification.
  • NF C93-340-1*NF EN 60424-1:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1 : general specification
  • NF A91-480*NF EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
  • NF T73-423*NF EN 12836:2002 Surface active agents - Determination of the water number of alkoxylated products
  • NF EN 12836:2002 Agents de surface - Détermination du nombre d'eau dans les produits alkoxylés
  • NF T73-242:1995 Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Determination of content of unsulfated matter.
  • NF A91-450:2011 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium.
  • NF A36-328:2005 Iron and steel - Determination of the conventional depth of hardening after surface heating.
  • NF C93-340-8*NF EN 60424-8:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8 : PQ-cores
  • NF C93-333:1987 Composants magnétiques et ferrites - Bobines de faible valeur d'inductance pour montage en surface - Prescriptions générales
  • NF C93-093-9*NF EN IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9 : planar cores
  • NF C93-340-4:2004 Ferrite cores - Guide on the limits of surface irregularities - Part 4 : ring cores.
  • NF C93-340-4*NF EN 60424-4:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4 : ring cores
  • NF T73-322*NF EN 1791:1997 Surface active agents. Fatty alkyl dimethyl amine oxides. Determination of the amine oxide content.
  • NF T31-002:1986 Pigments. Iron oxide pigments. Specifications.
  • NF A91-460:1977 SURFACE TREATMENTS. SHERARDIZED COATINGS ON IRON AND STEEL (SHERARDIZATION).
  • NF A20-404:1984 Chemical analysis of iron ores. Determination of carbon dioxyde.
  • NF EN IEC 63093-14:2019 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 14 : noyaux EFD
  • NF T73-203*NF ISO 2270:1989 Non-ionic surface active agents. Polyethoxylated derivatives. Iodometric determination of oxyethylene groups.
  • NF A91-451:1999 Traitements de surface - Aluminium et alliages d'aluminium anodisés - Qualification des produits de nettoyage.
  • NF C93-377-4*NF EN IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4 : RM-cores
  • NF C93-093-14*NF EN IEC 63093-14:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14 : EFD-cores
  • NF C93-093-7*NF EN IEC 63093-7:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7 : EER-cores
  • NF C93-093-13*NF EN IEC 63093-13:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13 : PQ-cores
  • NF EN IEC 63093-4:2019 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 4 : noyaux RM
  • NF EN IEC 63093-8:2022 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 8 : noyaux E
  • NF EN IEC 63093-7:2018 Noyaux de ferrite - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 7 : noyaux EER
  • NF EN IEC 63093-13:2019 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 13 : noyaux PQ
  • NF T73-278*NF EN 13320:2002 Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates
  • NF EN 13320:2002 Agents de surface - Détermination de traces d'oxyde d'éthylène libre dans les éthoxylats par chromatographie en phase gazeuse
  • NF T20-219:1987 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption. Single-point method.
  • NF M60-456*NF EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method

Professional Standard - Light Industry, Iron oxide surface

  • QB/T 1219-1991 Technical conditions for bicycle surface oxidation treatment

European Committee for Standardization (CEN), Iron oxide surface

  • EN 1791:1997 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content
  • EN 13268:2001 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts
  • DD ENV 12836-1999 Surface Active Agents - Determination of the Water Number of Alkoxylated Products
  • EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
  • EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)
  • EN 13320:2002 Surface Active Agents - Gas Chromatographic Trace Determination of Free Ethylene Oxide in Ethoxylates
  • CEN EN ISO 1248:2008 Iron oxide pigments - Specifications and methods of test (ISO 1248:2006 including Technical Corrigendum 1:2007)

German Institute for Standardization, Iron oxide surface

  • DIN EN 1791:1997 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content; German version EN 1791:1997
  • DIN 19279:2018-01 Photocatalytic activity of surfaces - Determination of the photocatalytic deposition velocity of nitrogen monoxide at photocatalytically active surfaces
  • DIN EN 1791:1997-03 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content; German version EN 1791:1997
  • DIN EN 60424-4:2001 Ferrit cores - Guide on the limits of surface irregularities - Part 4: Ring-cores (IEC 60424-4:2001); German version EN 60424-4:2001
  • DIN EN 13268:2001 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts; German version EN 13268:2001
  • DIN EN 12836:2002-06 Surface active agents - Determination of the water number of alkoxylated products; German version EN 12836:2002
  • DIN EN ISO 2106:2020-05 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019); German version EN ISO 2106:2020
  • DIN EN 60424-1:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification (IEC 60424-1:1999); German version EN 60424-1:1999
  • DIN EN IEC 63093-9:2021-03 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores (IEC 63093-9:2020); German version EN IEC 63093-9:2020 / Note: DIN EN 60424-5 (2009-12) and DIN EN 62317-9 (2008-01) remain valid alongside this st...
  • DIN EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
  • DIN EN 60424-2:1998 Guidance on the limits of surface irregularities of ferrite cores - Part 2: RM-cores (IEC 60424-2:1997); German version EN 60424-2:1997
  • DIN 876-2:1984-08 Surface plates; cast iron surface plates, requirements and testing / Note: To be replaced by DIN 876-2 (2009-11).
  • DIN EN IEC 63093-3:2021-03 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches (IEC 63093-3:2020); German version EN IEC 63093-3:2020 / Note: DIN EN 62323 (2006-01) remains va...
  • DIN EN 60424-3:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores (IEC 60424-3:1999); German version EN 60424-3:1999
  • DIN EN IEC 63093-14:2019-12 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores (IEC 63093-14:2019); German version EN IEC 63093-14:2019 / Note: DIN EN 62317-14 (2009-03) remains valid alongside this standard until 2022-05-09.
  • DIN EN IEC 63093-4:2019-11 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores (IEC 63093-4:2019); German version EN IEC 63093-4:2019 / Note: DIN EN 60424-2 (2016-10), DIN EN 62317-4 (2006-07) and DIN EN 62317-4 Berichtigung 1 (20...
  • DIN EN IEC 63093-13:2019-12 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores (IEC 63093-13:2019); German version EN IEC 63093-13:2019 / Note: DIN EN 60424-8 (2016-07) and DIN EN 62317-13 (2016-07) remain valid alongside this st...
  • DIN EN 13320:2002-09 Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates; German version EN 13320:2002

KR-KS, Iron oxide surface

  • KS D 0275-1993(2023) Method of measuring surface hardness for nitrided iron and steel
  • KS L 1676-2023 Test method for the fixing performance of nitrogen oxides and sulfur oxides on the surface of photocatalytic construction materials
  • KS C IEC 60424-8-2019 Ferrite cores — Guidelines on the limits of surface irregularities — Part 8: PQ-cores
  • KS C IEC 60424-2-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
  • KS C IEC 60424-1-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
  • KS C IEC 60424-4-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
  • KS M ISO 2270-2008(2023) Non-ionic surface active agents－Polyethoxylated derivatives－Iodometric determination of oxyethylene groups
  • KS C IEC 60424-3-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
  • KS M ISO 8215-2007(2023) Surface active agents－Washing powders－Determination of total silica content－Gravimetric method

CZ-CSN, Iron oxide surface

International Electrotechnical Commission (IEC), Iron oxide surface

  • IEC 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores
  • IEC 60424-2:1997 Guidance on the limits of surface irregularities of ferrite cores - Part 2: RM-cores
  • IEC 60424-1:1999 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification
  • IEC 60424-1:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification
  • IEC 60424-8:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8: PQ-cores
  • IEC 60424-2:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores
  • IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores
  • IEC 60424-4:2001 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores
  • IEC 60424-4:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores
  • IEC 63093-3:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches
  • IEC 60424-3:1999 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores
  • IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores
  • IEC 63093-14:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores
  • IEC 63093-1:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
  • IEC 63093-8:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores
  • IEC 63093-13:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores
  • IEC 63093-7:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores
  • IEC 63093-12:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores

AR-IRAM, Iron oxide surface

Professional Standard - Chemical Industry, Iron oxide surface

BE-NBN, Iron oxide surface

  • NBN T 63-121-1980 Surface active agents - Ethylene oxide adducts - Iodometric determi-nation of oxyethylene groups
  • NBN T 63-146-1981 Surface active agents - Technical ethoxylated fatty amines - Methods of analysis
  • NBN-ISO 2270:1990 Non-ionic surface active agents - Polyethoxylated derivatives - lodometric determination of oxyethylene groups

Danish Standards Foundation, Iron oxide surface

  • DS/EN 1791:1998 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content
  • DS/EN 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores
  • DS/EN 12836:2002 Surface active agents - Determination of the water number of alkoxylated products
  • DS/EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
  • DS/ISO 2106:1988 Anodizing of aluminium and its alloys. Determination of mass pr. unit area (surface density) of anodic oxide coatings. Gravimetric method
  • DS/EN 10328:2005 Iron and steel - Determination of the conventional depth and hardening after surface heating
  • DS/EN 60424-2:1998 Guidance of the limits of surface irregularities of ferrite cores - Part 2: RM-cores
  • DS/EN 60424-1:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification
  • DS/EN 60424-4:2001 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores
  • DS/EN 13320:2002 Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates
  • DS/EN ISO 8799:2009 Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter
  • DS/EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profiliometric method

Lithuanian Standards Office , Iron oxide surface

  • LST EN 1791-2002 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content
  • LST EN 12836-2002 Surface active agents - Determination of the water number of alkoxylated products
  • LST EN 10328-2005 Iron and steel - Determination of the conventional depth of hardening after surface heating
  • LST EN 60424-4-2002 Ferrite cores. Guide on the limits of surface irregularities. Part 4: Ring-cores (IEC 60424-4:2001)
  • LST EN 60424-5-2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores (IEC 60424-5:2009)
  • LST EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)
  • LST EN 13320-2002 Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates

AENOR, Iron oxide surface

  • UNE-EN 1791:1997 Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content
  • UNE-EN 12836:2002 Surface active agents- Determination of the water number of alkoxylated products.
  • UNE-EN 10328:2007 Iron and steel - Determination of the conventional depth of hardening after surface heating
  • UNE 55518:1991 NON-IONIC SURFACE ACTIVE AGENTS. POLYETHOXYLATED DERIVATIVES. IODOMETRIC DETERMINATION OF OXYETHYLENE GROUPS
  • UNE-EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)
  • UNE 55730:1982 SURFACE ACTIVE AGENTS. NON-IONIC SURFACE ACTIVE AGENTS. POLYETHOXYLATED DERIVATIVES. DETERMINATION OF HYDROXYL VALUE. ACETIC ANHYDRIDE METHOD
  • UNE 55731:1982 SURFACE ACTIVE AGENTS. NON-IONIC SURFACE ACTIVE AGENTS. POLYALKAXYLATED DERIVATIVES. DETEMINATION OF HYDROXYL VALUE. PHTALIC ANHYDRIDE METHOD
  • UNE 82309-1:1999 SURFACE PLATES. PART 1: CAST IRON.
  • UNE 55732:1984 SURFACE ACTIVE AGENTS. TECHNICAL ETHOXYLATED FATTY AMINES. METHODE OF ANALYSIS
  • UNE-EN 13320:2002 Surface active agents- Gas chromatographic trace determination of free ethylene oxide in ethoxylates.
  • UNE 55837:1987 SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF TOTAL SILICA CONTENT. GRAVIMETRIC METHOD

European Committee for Electrotechnical Standardization（CENELEC）, Iron oxide surface

  • EN 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores
  • EN IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores
  • EN 60424-8:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8: PQ-cores
  • EN 60424-2:1997 Guidance of the Limits of Surface Irregularities of Ferrite Cores - Part 2: RM-Cores
  • EN 60424-2:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores
  • EN 60424-4:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores
  • EN 60424-1:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification

HU-MSZT, Iron oxide surface

U.S. Military Regulations and Norms, Iron oxide surface

American Society for Testing and Materials (ASTM), Iron oxide surface

  • ASTM D3722-05 Standard Specification for Natural Red and Brown Iron Oxide Pigments
  • ASTM D3722-05(2011) Standard Specification for Natural Red and Brown Iron Oxide Pigments
  • ASTM D3872-05(2011) Standard Test Method for Ferrous Iron in Iron Oxides
  • ASTM B101-02 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
  • ASTM B101-01 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
  • ASTM B101-96 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
  • ASTM B1019-21 Standard Test Method for Determination of Surface Oxides on Copper Rod(for Electrical Purposes)
  • ASTM D3872-05 Standard Test Method for Ferrous Iron in Iron Oxides
  • ASTM D2959-95(2017) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
  • ASTM D4620-98 Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
  • ASTM D4620-02(2007) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
  • ASTM D4620-02(2021) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
  • ASTM D2959-95(2009) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
  • ASTM D3872-86(1999) Standard Test Method for Ferrous Iron in Iron Oxides
  • ASTM D4620-02 Standard Test Method for Evaluating the Effective Surface Area of Zinc-Oxide in Rubber
  • ASTM D4620-02(2012) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber

Professional Standard - Building Materials, Iron oxide surface

  • JC/T 995-2006 Zirconia powder with low specific surface area and better sinter ability

Professional Standard - Customs, Iron oxide surface

  • HS/T 4-2006 Identification of surface treatment of silicon dioxide with organic materials

海关总署, Iron oxide surface

  • HS/T 47-2014 Method for identification of organic surface-treated silica

Group Standards of the People's Republic of China, Iron oxide surface

ZA-SANS, Iron oxide surface

  • SANS 2106:1982 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxide coatings - Gravimetric method

AWS - American Welding Society, Iron oxide surface

  • C4.1 SET-1977 Oxygen Cutting Surface Roughness Gauge and Chart for Criteria Describing Oxygen Cut Surfaces
  • C4.1-1977 CRITERIA FOR DESCRIBING OXYGEN-CUT SURFACES

American Water Works Association (AWWA), Iron oxide surface

  • AWWA C116/A21.16-2009 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings Includes Erratum: January 2010
  • AWWA C116/A21.16 ERTA-2010 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings

American National Standards Institute （ANSI), Iron oxide surface

  • ANSI/AWWA C116/A21.16-2009 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings
  • ANSI/AWWA C116/A21.16-2003 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service

SE-SIS, Iron oxide surface

American Welding Society (AWS), Iron oxide surface

  • AWS PHB-4-2000 Everyday Pocket Handbook for Gas Metal Arc and Flux Cored Arc Welding
  • AWS C4.1-1977 Criteria for Describing Oxygen-Cut Surfaces

BR-ABNT, Iron oxide surface

Standard Association of Australia （SAA）, Iron oxide surface

  • AS 2879.4:2003 Alumina - Determination of specific surface area by nitrogen adsorption

Professional Standard - Commodity Inspection, Iron oxide surface

  • SN/T 3323.6-2013 Mill scale.Part 6:Method for manual sampling of mill scale in bulk
  • SN/T 0829-1999 Method for the determination of MgO,SiO&sub2;,CaO.Fe&sub2;O&sub3;,AlO&sub3;,MnO,TiO&sub2; contents in magnesite for export -X-ray fluorescence spectrometric method
  • SN/T 3323.1-2012 Mill scale.Part 1:Determination of ferrous oxide.Potassium dichromate titration
  • SN/T 1097-2002 Determination of phosphorus pentoxide,calcium oxide,ferric oxide,aluminum oxide.magnesium oxide,silicon dioxide and potassium oxide content for export phosphate rock by X-ray fluorescence spectrometry
  • SN/T 2949-2011 Determination of silicon dioxide, ferric oxide, aluminum oxide, calcium oxide and magnesium oxide in talc for export X-ray fluorescence spectrometry
  • SN/T 3102-2012 Rules for the identification of iron ores,return fines and millscale
  • SN/T 0481.10-2011 Examination methods for bauxite for export - Part 10: Determination of silicon dioxide, ferric oxide, aluminum oxide, calcium oxide, magnesium oxide, potassium oxide, phosphorus pentoxide and titanium dioxide by X-ray fluorescence spectrometry

RU-GOST R, Iron oxide surface

  • GOST 21138.7-1978 Chalk. Method for determination of ferric-aluminium sesquioxides mass fraction
  • GOST 18184.5-1979 Niobium pentoxide. Methods for the determination of oxides, aluminium, calcium and iron, of dioxides silicon and titanium
  • GOST 23201.1-1978 Alumina. Methods of spectral analysis. Determination of silicon dioxide, iron oxide, sodium oxide and magnium oxide
  • GOST 25702.18-1983 Raremetallic concentrates. Spectral methods of the determination of alumina, barium, iron, calcium, silicon, magnium, niobium, tantalium, titanium, zirconium and chromium oxide
  • GOST 23260.4-1978 Marble. Method for the determination of silicon dioxide, aluminium oxide and ferric oxide
  • GOST 18262.14-1988 Titanomagnetite ores, ironvanadium concentrates, agglomerates and pellets. Method for determination of potassium oxide and sodium oxide
  • GOST 18262.7-1988 Titanomagnetite ores, ironvanadium concentrates, agglomerates and pellets. Methods for determination of calcium oxide and magnesium oxide
  • GOST 21138.8-1978 Chalk. Method for determination of iron oxide mass fraction

Defense Logistics Agency, Iron oxide surface

工业和信息化部, Iron oxide surface

  • HG/T 5069-2016 Transparent iron oxide pigment
  • HG/T 5759-2020 Room temperature iron oxide desulfurizer
  • YB/T 4850-2020 Determination of direct reduced iron total iron, phosphorus, sulfur, silica, aluminum oxide, calcium oxide and magnesium oxide content by wavelength dispersive X-ray fluorescence spectrometry
  • XB/T 625-2020 Chemical analysis method of rare earth composite yttrium-zirconium ceramic materials. Determination of titanium oxide, aluminum oxide, sodium oxide and iron oxide content.
  • YB/T 4609-2017 Test methods for metallic chromium and chromium oxide on the surface of electroplated chromium steel plates and steel strips

ES-UNE, Iron oxide surface

  • UNE-EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
  • UNE-EN IEC 63093-9:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores (Endorsed by Asociación Española de Normalización in July of 2020.)
  • UNE-EN IEC 63093-3:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches (Endorsed by Asociación Española de Normalización in July of 2020.)
  • UNE-EN IEC 63093-13:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores (Endorsed by Asociación Española de Normalización in May of 2019.)
  • UNE-EN IEC 63093-8:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores (Endorsed by Asociación Española de Normalización in November of 2018.)
  • UNE-EN IEC 63093-7:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores (Endorsed by Asociación Española de Normalización in June of 2018.)
  • UNE-EN IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores (Endorsed by Asociación Española de Normalización in June of 2019.)
  • UNE-EN IEC 63093-14:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores (Endorsed by Asociación Española de Normalización in August of 2019.)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Iron oxide surface

  • GB/T 9634.8-2018 Ferrite cores—Guideline on the limits of surface irregularities—Part 8: PQ-cores
  • GB/T 34491-2017 Coatings for sintered neodymium iron boron permanent magnets
  • GB/T 32996-2016 Surface chemical analysis—Analysis of metal oxide films by glow-discharge optical emission spectrometry

ES-AENOR, Iron oxide surface

Professional Standard - Aviation, Iron oxide surface

SSPC - The Society for Protective Coatings, Iron oxide surface

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Iron oxide surface

  • GJB 5381.24-2005 Methods of chemical analysis for pyrotech. Part 24: Determination of ferriferous oxide and ironic oxide content. Oxidation reduction method

Military Standard of the People's Republic of China-General Armament Department, Iron oxide surface

  • GJB 8682.24-2015 Methods for chemical analysis of pyrotechnic powders Part 24: Determination of ferric oxide and ferric oxide content Oxidation-reduction method

TH-TISI, Iron oxide surface

  • TIS 2259-2006 Micaceous iron oxide paint
  • TIS 1756-1999 Non.ionic surface active agents.polyethoxylated derivatives.iodometric determination of oxyethylene groups

Indonesia Standards, Iron oxide surface

  • SNI 13-6668-2002 Determination of SiO2 total, Al2O3, Fe2O3, Cr2O3 and TiO2 contents for quartz sand
  • SNI 13-6620-2001 Determination for Al2O3, Fe2O3, CaO and MgO content of clay by volumetry

TR-TSE, Iron oxide surface

  • TS 3130-1978 METHODS FOR THE CHEMICAL ANALYSIS OF GLASS SAND DETERMINATION OF FERRIC OXIDE - TITANIUMDIOKSIDE - ALUMINIUM OXIDE AND ZIRKONIUM DIOKSIDE
  • TS 3080-1978 Methods For The Chemical Analysis Of Ceramic Whiteware Clays Determinat?on of Silicon Dioxi- de, Total R2 O3, Iron - 3 - Oxide, Titanium Dioxide, Aluminum - 3 - Ox?de, Calcium Ox?de And Magnesium Oxide Contents

YU-JUS, Iron oxide surface

  • JUS H.E8.053-1992 Surface active agents.Technical ethoxylated fatty amines. Methods of analysis
  • JUS C.T7.374-1979 Protection against corroston. Oilpaint with iron oxide. II coat

IT-UNI, Iron oxide surface

Professional Standard - Military and Civilian Products, Iron oxide surface

  • WJ 2607-2003 General specifications for surface chemical treatment and electrochemical oxidation films of ordination products

未注明发布机构, Iron oxide surface

  • DIN EN IEC 63093-8:2019 Ferrite cores – Guidelines on dimensions and limits of surface damage – Part 8: E cores
  • BS EN IEC 63093-7:2018(2019) Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 7 : EER - cores
  • BS ISO 8008:2005(2006) Aluminium oxide primarily used for the production of aluminium — Determination of specific surface area by nitrogen adsorption

国家市场监督管理总局、中国国家标准化管理委员会, Iron oxide surface

  • GB/T 40793-2021 Nonmetallic coatings for sintered neodymium iron boron permanent magnets

VN-TCVN, Iron oxide surface

  • TCVN 7891-2008 Spinel refractories.Test-methods for determination of silicon (Ⅳ) oxide, iron (Ⅲ) oxide, aluminium oxide, calcium oxide

Professional Standard - Non-ferrous Metal, Iron oxide surface

  • YS/T 1047.6-2015 Methods for chemical analysis of copper magnetite.Part 6:Determination of copper,total iorn,silicon dioxide, alumina oxide, calcium oxide, magnesium oxide, titanium dioxide, manganese oxide and phosphorus contents.Wavelength dispersive X-ray fluorescence
  • YS/T 438.4-2001 Methods for physical performance determination of sandy alumina.Determination of specific surface area.B.E.T. method

Professional Standard - Petroleum, Iron oxide surface

Professional Standard - Aerospace, Iron oxide surface

  • QJ 3095-1999 Specifications for permanent magnet oxide magnets

DE-VDA, Iron oxide surface

Professional Standard - Petrochemical Industry, Iron oxide surface

  • NB/SH/T 0832-2010 Determination of hot surface oxidation of lubricating oils by pressure differential scanning calorimetry

Sichuan Provincial Standard of the People's Republic of China, Iron oxide surface

CENELEC - European Committee for Electrotechnical Standardization, Iron oxide surface

  • EN IEC 63093-7:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores

International Federation of Trucks and Engines, Iron oxide surface

GM Europe, Iron oxide surface

Professional Standard - Machinery, Iron oxide surface

  • JB/T 5190.11-1991 Technical requirements for chemical oxide film on ferrous metal parts for surface treatment of photomechanical parts

SG-SPRING SG, Iron oxide surface

  • SS 6-1970 SPECIFICATION FOR Red Lead Based Primers for Iron and Steel Surfaces

U.S. Air Force, Iron oxide surface

  iron oxide, Iron oxide analysis, Iron oxide analysis, Iron oxide surface, Iron Oxide Spectrum, Iron Oxide Determination Components, Iron oxide peak, Iron oxide series, Iron oxide series, Iron oxide fluorescence, iron oxide black, Iron Tetroxide, Mica Iron Oxide, Synthetic Iron Oxide, iron oxide, Synthetic Iron Oxide, Solution Iron Oxide, Nano Iron Oxide, Iron Oxide Pigments, Iron oxide yellow.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved