ZH
RU
ES

Surface Analysis and Testing Technology

Surface Analysis and Testing Technology, Total:372 items.

In the international standard classification, Surface Analysis and Testing Technology involves: Vocabularies, Linear and angular measurements, Vacuum technology, Quality, Road vehicle systems, Acoustics and acoustic measurements, Road engineering, Products of the chemical industry, Applications of information technology, Information technology (IT) in general, Construction materials, Electricity. Magnetism. Electrical and magnetic measurements, Protection against fire, Hydraulic energy engineering, Electronic component assemblies, Powder metallurgy, Nuclear energy engineering, Electronic components in general, Alarm and warning systems, Air quality, Radiation measurements, Waxes, bituminous materials and other petroleum products, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Surface treatment and coating, Lubricants, industrial oils and related products, Ceramics, Shipbuilding and marine structures in general, Software development and system documentation, Laboratory medicine, Analytical chemistry, Geology. Meteorology. Hydrology, Construction of airports, Medical equipment, Particle size analysis. Sieving, Cereals, pulses and derived products, Equipment for petroleum and natural gas industries, Integrated circuits. Microelectronics, Biology. Botany. Zoology, Ferrous metals, Water quality, Petroleum products in general, Microbiology, Processes in the food industry, Environmental testing, General methods of tests and analysis for food products, Measurement of volume, mass, density, viscosity, Paper and board, Paper products, Iron and steel products, Testing of metals, Physics. Chemistry, Industrial automation systems, Character sets and information coding, Adhesives, Open systems interconnection (OSI), Paints and varnishes, Freight distribution of goods, Radiocommunications, Electromagnetic compatibility (EMC), Bearings, Non-ferrous metals, Products of non-ferrous metals, Materials for the reinforcement of composites, Semiconductor devices, Farming and forestry, Protection against dangerous goods, Test conditions and procedures in general, Wastes.

AT-ON, Surface Analysis and Testing Technology

ONORM M 1113-1982 Technical surfaces; methods of surjace analyzing Surjaces techniqu.es; methodes de essai des surfaces
ONORM M 6253 Teil.2-1986 Water analysis; determination ofnonionic Surfactants using Dragendorff reagent

American Society for Testing and Materials (ASTM), Surface Analysis and Testing Technology

ASTM E673-98E1 Standard Terminology Relating to Surface Analysis
ASTM E673-01 Standard Terminology Relating to Surface Analysis
ASTM E673-03 Standard Terminology Relating to Surface Analysis
ASTM E673-02 Standard Terminology Relating to Surface Analysis
ASTM E673-02b Standard Terminology Relating to Surface Analysis
ASTM E673-02a Standard Terminology Relating to Surface Analysis
ASTM D452-91(1997)e1 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM D452-91(2008) Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM D452/D452M-19 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM E408-71(1996)e1 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E408-71(2002) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM F3417-20 Standard Test Method for Gas Chromatography Analysis of Petroleum Waxes Used in Equestrian Synthetic Surfaces
ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E408-71(2008) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E408-13 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM C715-90(2006) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM C715-90(2011)e1 Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM D3825-09 Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
ASTM E950/E950M-09(2018) Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer-Established Inertial Profiling Reference
ASTM C715-90(2000) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM C715-90(2016) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM E485-94(1999)e1 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique
ASTM E485-94(2005) Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique
ASTM E1086-08 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
ASTM E1086-94(2005) Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
ASTM E1086-94(2000) Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
ASTM E2340/E2340M-11 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E2340/E2340M-11(2021) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E227-90(1996) Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique (Withdrawn 2002)
ASTM E503/E503M-88(2000) Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique
ASTM E503/E503M-88(2004) Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique
ASTM E2340/E2340M-11e1 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E2340/E2340M-11(2015) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E607-90(1996) Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique, Nitrogen Atmosphere
ASTM E607-02 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
ASTM E2340-06 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM D6480-19 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
ASTM F1438-93(2005) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM D6299-17b Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D6299-20a Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D6299-21 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D6299-18 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D6299-19 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D6299-17 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D6299-23 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

German Institute for Standardization, Surface Analysis and Testing Technology

DIN 28400-6:1980-10 Vacuum technology; terms and definitions, surface analysis techniques
DIN 28400-6:1980 Vacuum technology; terms and definitions, surface analysis techniques
DIN ISO 13473-2:2004 Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis (ISO 13473-2:2002)
DIN ISO 13473-2:2004-07 Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis (ISO 13473-2:2002)
DIN EN 62137-1-1:2008-02 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test (IEC 62137-1-1:2007); German version EN 62137-1-1:2007
DIN EN 62137-1-2:2008-02 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test (IEC 62137-1-2:2007); German version EN 62137-1-2:2007
DIN EN 62137-1-3:2009-07 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test (IEC 62137-1-3:2008); German version EN 62137-1-3:2009
DIN EN 62137-1-4:2009-08 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test (IEC 62137-1-4:2009); German version EN 62137-1-4:2009
DIN EN 62137-1-5:2010-01 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-5: Mechanical shear fatigue test (IEC 62137-1-5:2009); German version EN 62137-1-5:2009
DIN 58960-3:1988-05 Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers
DIN 51456:2013-10 Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)
DIN EN 62137-4:2015-07 Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices (IEC 62137-4:2014); German version EN 62137-4:2014 + AC:2015 / Note: DIN EN 62137 (2005-04) remains valid alongside this ...
DIN 66126:2015 Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
DIN EN 13036-1:2010-10 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique; German version EN 13036-1:2010
DIN 51456:2013 Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)
DIN EN 62137-1-1:2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test (IEC 62137-1-1:2007); German version EN 62137-1-1:2007
DIN EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010); German version EN ISO 25178-6:2010
DIN EN 62137-1-2:2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test (IEC 62137-1-2:2007); German version EN 62137-1-2:2007
DIN 66126:2015-08 Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
DIN 58960-2:1997-05 Photometer for analytical tests - Part 2: Technical design; classification, components, concepts
DIN EN ISO 10545-2:1997 Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:1995, including Technical Corrigendum 1:1997); German version EN ISO 10545-2:1997
DIN EN 62137-1-3:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test (IEC 62137-1-3:2008); German version EN 62137-1-3:2009
DIN 19051-3:2013-03 Test charts for micrography - Part 3: Test table for microfilming with planetary camera of technical drawings
DIN 19051-3 Beiblatt 1:2013-03 Test charts for micrography - Part 3: Test table for microfilming with planetary camera of technical drawings; Supplement 1: Neutral density cards for practical use
DIN CEN/TS 15862:2012-11*DIN SPEC 91233:2012-11 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions; German version CEN/TS 15862:2012
DIN 50452-1:1995-11 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
DIN 58960-4:1991-01 Photometer for analytical tests; requirements for the description of technical data for the user
DIN EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test (IEC 62137-1-4:2009); German version EN 62137-1-4:2009
DIN EN 12740:1999-10 Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste; German version EN 12740:1999

未注明发布机构, Surface Analysis and Testing Technology

VDI VDE 2602 Blatt 3-2012 Surface testing Specification of surface conditions in technical product documentation Surface measurement Specification of surface conditions in technical product documentation
VDI VDE 2602 Blatt 3-2018 Surface testing, specification of surface conditions in technical product documentation, Surface measurement, Specification of surface conditions in technical product documentation
ISO 14976:1998/Cor 1:1999 Surface Chemical Analysis Data Transfer Format Technical Corrigendum 1
ISO 6344-1:1998/Cor 1:1999 Coated abrasives — Grain size analysis — Part 1 : Grain size distribution test
BS EN 62137-4:2014(2015) Electronics assembly technology Part 4 : Endurance test methods for solder joint of area array type package surface mount devices
NF P98-831-1*NF EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Part 1 : measurement of pavement surface macrotexture depth using a volumetric patch technique.
BS EN 725-6:1996(1999) Advanced technical ceramics — Methods of test for ceramic powders — Part 6 : Determination of the specific surface area
BS 1715-1:1991(2008) Analysis of soaps — Part 1 : General introduction, sampling, and test for presence of synthetic anionic - active surface active agents
BS EN 1967:2002(2005) Structural adhesives — Evaluation ofthe effectiveness ofsurface treatment techniques for aluminium using a wet peel test in association with the floating roller method
DIN EN 1967 Berichtigung 1:2004 Assessment of the effectiveness of surface treatment techniques for aluminum using the wet peeling test in conjunction with the roller peeling test; German version EN 1967:2002
DIN IEC 1342:1996 Nuclear instrumentation — Multichannel! pulse height analyzers — Main characteristics, technical requirements and test methods
ISO 7530-1:1990/Cor 1:1992 Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: General requirements and sample dissolution
ISO 1391-2:1976/Cor 1:1977 Test methods for industrial paraformaldehyde Part 2: Determination of ash content Corrigendum 1

CN-STDBOOK, Surface Analysis and Testing Technology

图书 A-4619 Material quality inspection and analysis technology
图书 3-9090 Review of Analytical Testing Instruments--Viewing the Progress of Analytical Technology from BCEIA2017 Instrument Exhibition

International Organization for Standardization (ISO), Surface Analysis and Testing Technology

ISO/TR 29901:2007/cor 1:2009 Selected illustrations of full factorial experiments with four factors; Technical Corrigendum 1
ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis
ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture
ISO 25178-73:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
ISO 22743:2006/Cor 1:2007 Water quality - Determination of sulfates - Method by continuous flow analysis (CFA)
ISO/CD 15016 Ships and marine technology — Specifications for the assessment of speed and power performance by analysis of speed trial data
ISO/IEC/IEEE 29119-4:2015 Software and systems engineering — Software testing — Part 4: Test techniques
ISO 10418:2003/cor 1:2008 Petroleum and natural gas industries - Offshore production installations - Analysis, design, installation and testing of basic surface process safety systems; Technical Corrigendum 1
ISO 23033:2021 Biotechnology — Analytical methods — General requirements and considerations for the testing and characterization of cellular therapeutic products
ISO 25178-71:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards
ISO 25178-71:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards
ISO 7875-1:1996/cor 1:2003 Water quality - Determination of surfactants - Part 1: Determination of anionic surfactants by measurement of the methylene blue index (MBAS); Technical Corrigendum 1
ISO 13565-1:1996/cor 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions; Technical Corrigendum 1
ISO 8655-6:2002/cor 1:2008 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error; Technical Corrigendum 1
ISO 11093-8:2012/cor 1:2013 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis; Technical Corrigendum 1
ISO/DIS 7392 Fine bubble technology — Evaluation method for determining surface tension of ultrafine bubble dispersions
ISO/PRF 5618-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for GaN crystal surface defects — Part 1: Classification of defects
ISO 21256-3:2021 Fine bubble technology - Cleaning applications - Part 3: Test method for cleaning hard flooring surfaces
ISO 13565-1:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surface having stratified functional properties - Part 1: Filtering and general measurement conditions
ISO 22987:2020 Ships and marine technology — Laboratory test method for skin friction of antifouling paints by rotating drum
ISO 5436-2:2001/Cor 1:2006 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards; Technical Corrigendum 1
ISO 1496-2:1996/Cor 1:1997 Series 1 freight containers - Specification and testing - Part 2: Thermal containers; Technical Corrigendum 1
ISO/TS 21256-1:2020 Fine bubble technology — Cleaning applications — Part 1: Test method for cleaning salt (NaCl)-stained surfaces
ISO 15242-3:2006/cor 1:2010 Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface; Technical Corrigendum 1
ISO/DIS 5618-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for GaN crystal surface defects — Part 1: Part 1: Classification of defects
ISO/IEC 30107-3:2023 Information technology — Biometric presentation attack detection — Part 3: Testing and reporting
ISO 5436-2:2001/Cor 2:2008 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards; Technical Corrigendum 2
ISO/IEC 23003-1:2007/Amd 1:2008/Cor 1:2011 Information technology - MPEG audio technologies - Part 1: MPEG Surround - Amendment 1: Conformance testing; Technical Corrigendum 1
ISO 5436-1:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures
ISO 10418:1993 Petroleum and natural gas industries; offshore production platforms; analysis, design, installation and testing of basic surface safety systems
ISO/IEC 10729-1:1993 Information technology; Open Systems Interconnection; conformance test suite for the presentation layer; part 1: test suite structure and test purposes for the presentation protocol
ISO 5436-2:2012 Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards
ISO/CD 5618-2:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for GaN crystal surface defects — Part 2: Method of determining the etch pit density
ISO/DIS 5618-2:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for GaN crystal surface defects — Part 2: Method of determining the etch pit density
ISO 8655-7:2005/cor 1:2008 Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance; Technical Corrigendum 1
ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
ISO/IEC 19795-6:2012 Information technology - Biometric performance testing and reporting - Part 6: Testing methodologies for operational evaluation
ISO 5436-2:2001 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards
ISO 10418:2003 Petroleum and natural gas industries - Offshore production installations - Analysis, design, installation and testing of basic surface process safety systems
ISO 15242-2:2004/cor 1:2010 Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface; Technical Corrigendum 1
ISO/IEC 14496-4:2004/Amd 38:2010/Cor 1:2012 Information technology - Coding of audio-visual objects - Part 4: Conformance testing - Amendment 38: Conformance testing for Multiview Video Coding; Technical Corrigendum 1

RU-GOST R, Surface Analysis and Testing Technology

GOST R 52031-2003 Passenger cars. Defrosting and demisting systems for glazed surfaces. Technical requirements. Tests methods
GOST R 53702-2009 Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods
GOST 17225-1985 Radiometres for metering covers on alfa and beta activity dirt. General technical requirements and test methods
GOST R ISO 8637-1999 Haemodialysers, haemofilters and haemoconcentrators. Technical requirements and test methods
GOST R ISO 8638-1999 Extracorporeal blood circuit for haemodialysers, haemofilters and haemoconcentrators. Technical requirements and test methods
GOST R ISO/IEC 9646-4-1993 Information technology. Open systems interconnection. Conformance testing methodology and framewark. Part 4. Test realization

YU-JUS, Surface Analysis and Testing Technology

JUS H.G3.120-1987 Reagents. Oxalic acid dihydrate. Technical reguirements

SAE - SAE International, Surface Analysis and Testing Technology

SAE AS6171/2-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by External Visual Inspection@ Remarking and Resurfacing@ and Surface Texture Analysis Test Methods
SAE AS6171/2A-2017 Techniques for Suspect/Counterfeit EEE Parts Detection by External Visual Inspection@ Remarking and Resurfacing@ and Surface Texture Analysis Test Methods
SAE AS6171/10-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Thermogravimetric Analysis (TGA) Test Methods
SAE AS6171/4-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Delid/Decapsulation Physical Analysis Test Methods

IN-BIS, Surface Analysis and Testing Technology

American Gear Manufacturers Association, Surface Analysis and Testing Technology

AGMA 99FTM5-1999 Analysis of Micropitting on Prototype Surface Fatigue Test Gears

TR-TSE, Surface Analysis and Testing Technology

TS 2310-1976 Non- Destructive Testing- Metallographic Replica Technigues of Surface examination

Korean Agency for Technology and Standards (KATS), Surface Analysis and Testing Technology

KS M ISO 6384:2007 Surface active agents－Technical ethoxylated fatty amines－Methods of analysis
KS C IEC 60469-2-2013(2018) Pulse techniques and apparatus－Part 2：Pulse measurement and analysis, general considerations
KS C IEC 62137-1-1-2009(2020) Surface mounting technology－Environmental and endurance test methods for surface mount solder joint－Part 1－1：Pull strength test
KS X ISO/IEC/IEEE 29119-4:2018 Software and systems engineering ㅡ Software testing ㅡ Part 4: Test Techniques
KS C IEC 62137-1-2-2009(2020) Surface mounting technology－Environmental and endurance test methods for surface mount solder joint－Part 1-2: Shear strength test
KS C IEC 62137-1-1:2009 Surface mounting technology－Environmental and endurance test methods for surface mount solder joint－Part 1－1：Pull strength test
KS C IEC 62137-1-2:2009 Surface mounting technology－Environmental and endurance test methods for surface mount solder joint－Part 1-2: Shear strength test
KS X ISO/IEC 19795-1-2014(2019) Information technology — Biometric performance testing and reporting — Part 1: Principles and framework
KS C 9610-4-8-2017 Electromagnetic compatibility(EMC) — Part 4-8: Testing and measurement techniques — Power frequency magnetic field immunity test
KS B ISO 5436-1:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method;Measurement standards-Part 1:Material measures
KS B ISO 5436-1:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures
KS X ISO/IEC 10729-1:2008 Information technology－Open Systems Interconnection－Conformance test suite for the presentation layer－Part 1：Test suite structure and test purposes for the presentation protocol
KS X ISO/IEC 10729-1:2013 Information technology－Open Systems Interconnection－Conformance test suite for the presentation layer－Part 1：Test suite structure and test purposes for the presentation protocol
KS B ISO 13565-1:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 1: Filtering and general measurement conditions
KS B ISO 13565-1:2011 Geometrical Product Specifications(GPS)-Surface texture:Profile method; Surfaces having stratified functional properties-Part 1:Filtering and general measurement conditions
KS X ISO/IEC 9646-4-2008(2018) Information technology－Open Systems Interconnection－Conformance testing methodology and framework－Part 4：Test realization
KS B ISO 5436-2:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method;Measurement standards-Part 2:Software measurement standards
KS B ISO 5436-2:2014 Geometrical Product Specifications(GPS)-Surface texture:Profile method;Measurement standards-Part 2:Software measurement standards
KS B ISO 5436-2:2015 Geometrical Product Specifications(GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software meastureme standards
KS P 1019-2012(2017) The technology for gene expression analysis using DNA microarrays－Experimental procedures for DNA microarrays with direct labelling and measurement of gene expression
KS X ISO/IEC 30107-3:2021 Information technology — Biometric presentation attack detection —Part 3: Testing and reporting

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Surface Analysis and Testing Technology

GB/T 41818-2022 Information technology—Big data—Technical requirements for analysis-oriented data storage and retrieval
GB/T 4833.1-2007 Multichannel analyzers- Part 1: Main technical requirements and test methods
GB/T 33523.6-2017/ISO 25178-6-2 Product Geometric Specification (GPS) Surface Structure Area Method Part 6: Classification of Surface Structure Measurement Methods
GB/T 33523.6-2017 Product Geometric Specification (GPS) Surface Structure Area Method Part 6: Classification of Surface Structure Measurement Methods
GB/T 33523.6-2017/ISO 25178-6:2 Product Geometric Specification (GPS) Surface Structure Area Method Part 6: Classification of Surface Structure Measurement Methods
GB/T 15471-1995 General specification and test method for logic analyzers
GB/T 42543-2023 Determination of the Normal Elastic Constant of a Cantilever Beam by Surface Chemical Analysis Scanning Probe Microscopy
GB/T 29268.2-2012 Information technology.Biometric performance testing and reporting.Part 2:Testing methodologies for technology and scenario evaluation
GB/T 42659-2023 Surface Chemical Analysis Scanning Probe Microscopy Determination of Geometric Quantities Using Scanning Probe Microscopy: Measurement System Calibration
GB/T 18138.1-2000 Information technology-Open systems interconnection-Conformance test suite for the presentation layer-Part 1:Test suite structure and test purposes for the presentation protocol
GB/T 34899-2017 Micro-electromechanical system technology—Measuring method of microstructure surface stress based on Raman spectroscopy
GB/T 13859-1992 Performance and test methods of 30-channel pulse code modulation drop/insert equipment at 2048 kbit/s
GB/T 4833-1997 Multichannel pulse height analyzers--Main characteristics, technical requirements and test methods
GB/T 18778.1-2002 Geometrical product specifications(GPS)--Surface texture:Profile method;Surfaces having stratified functional properties--Part 1: Filtering and general measurement conditions
GB/T 41815.3-2023 Information Technology Biometric Presentation Attack Detection Part 3: Testing and Reporting
GB/T 19067.2-2004 Geometrical product Specifications(GPS)-Surface texture:Profile method Measurement standards-Part 2:Software measurement standards
GB/T 19067.1-2003 Geometrical product specifications(GPS)--Surface texture: Profile method measurement standards--Part 1: Material measures
GB/Z 42842.1-2023 Microbubble Technology Cleaning Applications Part 1: Test Method for Surface Salt (Sodium Chloride) Stain Cleaning

工业和信息化部, Surface Analysis and Testing Technology

YD/T 3774-2020 Big data distributed analytical database technical requirements and testing methods
YD/T 3759-2020 Big data business intelligence (BI) analysis tool technical requirements and testing methods
YD/T 3775-2020 Big data distributed transaction database technical requirements and testing methods
YD/T 3773-2020 Big data distributed batch processing platform technical requirements and testing methods

Jiangsu Provincial Standard of the People's Republic of China, Surface Analysis and Testing Technology

DB32/T 3762.8-2020 Novel Coronavirus Detection Technical Specifications Part 8: Object Surface Detection and Evaluation

Danish Standards Foundation, Surface Analysis and Testing Technology

DS/ISO/TR 9705-2:2002 Reaction-to-fire tests - Full-scale room test for surface products - Part 2: Technical background and guidance
DS/EN 62137-1-1:2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
DS/EN 62137-1-3:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test
DS/EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test
DS/EN 62137-1-2:2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test
DS/EN 13036-1:2011 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
DS/EN 62137-1-5:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test
DS/ISO 23033:2021 Biotechnology – Analytical methods – General requirements and considerations for the testing and characterization of cellular therapeutic products
DS/ISO 2854:1980 Statistical interpretation of data. Techniques of estimation and tests relating to means and variances
DS/EN 12740:2000 Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste

Association Francaise de Normalisation, Surface Analysis and Testing Technology

NF EN 62137-1-4:2009 Technologie de montage en surface - Méthodes d'essais d'environnement et d'endurance des joints brasés montés en surface - Partie 1-4 : essai de flexion cyclique
NF EN 62137-1-3:2009 Technique de montage en surface - Méthodes d'essai d'environnement et d'endurance des joints brasés montés en surface - Partie 1-3 : essai de chute cyclique
NF EN 62137-1-1:2014 Technologie de montage en surface - Méthodes d'essai d'environnement et d'endurance des joints brasés montés en surface - Partie 1-1 : essai de résistance à la traction
NF EN 62137-1-2:2014 Technologie de montage en surface - Méthodes d'essai d'environnement et d'endurance des joints brasés montés en surface - Partie 1-2 : essai de résistance au cisaillement
NF E05-031-6*NF EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture : Areal - Part 6 : classification of methods for measuring surface texture
NF C93-704-1-5*NF EN 62137-1-5:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-5 : mechanical shear fatigue test.
NF B42-006:1996 Advanced technical ceramics. Methods of test for ceramic powders. Part 6 : determination of the specific surface area.
NF C93-704-1-3*NF EN 62137-1-3:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3 : cyclic drop test
NF C93-704-1-4*NF EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4 : cyclic bending test.
NF EN 13036-1:2010 Caractéristiques de surface des routes et aérodromes - Méthodes d'essai - Partie 1 : mesurage de la profondeur de macrotexture de la surface d'un revêtement à l'aide d'une technique volumétrique à la tâche
NF EN IEC 62057-1:2023 Compteurs d'énergie électrique - Équipements, techniques et procédures d'essai - Partie 1 : bancs d'essai stationnaires des compteurs d'énergie électrique (MTU)
NF C93-704-1-1*NF EN 62137-1-1:2014 Surface-mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1 : pull strength test
NF C93-704-1-2*NF EN 62137-1-2:2014 Surface-mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2 : shear strength test
NF E05-031-71:2013 Geometrical product specifications (GPS) - Surface texture : areal - Part 71: software measurement standards
NF C90-901-406-1*NF EN IEC 63203-406-1:2022 Wearable electronic devices and technologies - Part 406-1 : test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin
NF C20-769:1998 Environmental testing. Part 2 : tests. Test Te : solderability testing of electronic components for surface mount technology by the wetting balance method.
NF EN IEC 60695-9-2:2021 Essais relatifs aux risques du feu - Partie 9-2 : propagation des flammes en surface - Résumé et pertinence des méthodes d'essai
NF EN IEC 63203-406-1:2022 Technologies et dispositifs électroniques prêts-à-porter - Partie 406-1 : méthode d'essai pour le mesurage de la température de surface des dispositifs électroniques prêts-à-porter placés au poignet au contact de la peau humaine
NF C93-704-4*NF EN 62137-4:2015 Electronics assembly technology - Part 4 : endurance test methods for solder joint of area array type package surface mount devices
XP CEN/TS 15862:2012 Caractérisation des déchets - Essai de lixiviation de conformité - Essai de lixiviation en bâchée unique pour des monolithes avec un rapport liquide/ surface (L/A) fixe, pour des prises d'essai de dimensions minimales fixes
FD CEN/TR 15175:2006 Caractérisation des boues - Protocole d'exécution d'essais interlaboratoires portant sur des méthodes d'analyses chimiques et microbiologiques des boues
NF EN ISO 10418:2004 Industries du pétrole et du gaz naturel - Plates-formes de production en mer - Analyse, conception, installation et essais des systèmes essentiels de sécurité de surface
NF E05-031-701*NF EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture : areal - Part 701 : calibration and measurement standards for contact (stylus) instruments.
NF E05-053-2*NF EN ISO 5436-2:2012 Geometrical Product Specifications (GPS) - Surface texture : profile method - Measurement standards - Part 2 : software measurement standards
NF Z70-020-3:1994 INFORMATION TECHNOLOGY. OPEN SYSTEMS INTERCONNECTION. CONFORMANCE TESTING METHODOLOGY AND FRAMEWORK. PART 3 : THE TREE AND TABULAR COMBINED NOTATION (TTCN). (EUROPEAN STANDARD EN 29646-3).

ES-UNE, Surface Analysis and Testing Technology

UNE-EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-4: Cyclic bending test (Endorsed by AENOR in May of 2009.)
UNE-EN 62137-1-3:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-3: Cyclic drop test (Endorsed by AENOR in May of 2009.)
UNE-EN 62137-1-5:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joints -- Part 1-5: Mechanical shear fatigue test (Endorsed by AENOR in August of 2009.)
UNE-EN 62137-1-1:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-1: Pull strength test (IEC 62137-1-1:2007). (Endorsed by AENOR in December of 2007.)
UNE-EN 62137-1-2:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-2: Shear strength test (IEC 62137-1-2:2007). (Endorsed by AENOR in December of 2007.)
UNE-EN 62137-4:2014/AC:2015 Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices (Endorsed by AENOR in March of 2015.)
UNE-EN 62137-4:2014 Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices (Endorsed by AENOR in February of 2015.)
UNE-EN IEC 62057-1:2023 Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs) (Endorsed by Asociación Española de Normalización in June of 2023.)
UNE-EN IEC 63203-406-1:2022 Wearable electronic devices and technologies - Part 406-1: Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN 725-12:2001 Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia (Endorsed by AENOR in June of 2001.)

Professional Standard - Water Conservancy, Surface Analysis and Testing Technology

SL/Z 572-2014 Technical guidelines on hydrological monitoring and evaluation in urban areas

水利部, Surface Analysis and Testing Technology

SL/T 572-2014 Technical Guidelines for Urban Hydrological Monitoring, Analysis and Evaluation

European Committee for Standardization (CEN), Surface Analysis and Testing Technology

EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
prEN 725-6-1992 Advanced technical ceramics; methods of test for ceramic powders; part 6: determination of the specific surface area
EN 725-6:1996 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 6: Determination of the Specific Surface Area
EN ISO 13565-1:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties Part 1: Filtering and General Measurement Conditions
EN 13036-1:2001 Road and Airfield Surface Characteristics - Test Methods - Part 1: Measurement of Pavement Surface Macrotexture Depth Using a Volumetric Patch Technique
EN 1971-2:2011 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
DD ENV 843-4-1994 Advanced Technical Ceramics - Monolithic Ceramics - Mechanical Properties at Room Temperature Part 4: Vickers, Knoop and Rockwell Superficial Hardness Tests
DD ENV 843-5-1996 Advanced Technical Ceramics - Monolithic Ceramics - Mechanical Tests at Room Temperature - Part 5: Statistical Analysis
EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)

BE-NBN, Surface Analysis and Testing Technology

NBN T 63-128-1980 Surface active agents - Analysis of technical alkane sulphonates - Deermination of alkane monosulphonates content

HU-MSZT, Surface Analysis and Testing Technology

MSZ 229/17-1983

CZ-CSN, Surface Analysis and Testing Technology

CSN 68 1148-1994 Testing methods for surfactans and detergents. Surface active agents. Analysis of soaps. Determination of free caustic lkali
CSN CEN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
CSN 68 1145-1994 Testing methods for surfactans and detergents. Analysis of soaps — Determination of total alkali content and total fatty atter content
CSN 35 6566-1988 Instruments for measurement of surface contamination from alpha, beta and alpha-beta emitting radionuclides. Classification, generál technical requirements and testing methods

British Standards Institution (BSI), Surface Analysis and Testing Technology

BS EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Classification of methods for measuring surface texture
BS 4359-4:1995 Determination of the specific surface area of powders - Recommendations for methods of determination of metal surface area using gas adsorption techniques
20/30369896 DC BS ISO 23033. Biotechnology. Analytical methods. General guidelines for the characterization and testing of cellular therapeutic products
BS EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Measurement of pavement surface macrotexture depth using a volumetric patch technique
BS EN 13036-1:2002 Road and airfield surface characteristics - Test methods - Measurement of pavement surface macrotexture depth using a volumetric patch technique
BS EN 62137-1-5:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5:Mechanical shear fatigue test
BS ISO 23033:2021 Biotechnology. Analytical methods. General requirements and considerations for the testing and characterization of cellular therapeutic products
PD ISO/TS 21256-1:2020 Fine bubble technology. Cleaning applications. Test method for cleaning salt (NaCl)-stained surfaces
21/30427990 DC BS EN 62057-3. Test equipment, techniques and procedures for electrical energy meter. Part 3. Automatic Meter Testing System (AMTS)
20/30392780 DC BS ISO 21256-3. Fine bubble technology. Cleaning applications - Part 3. Test method for cleaning hard flooring surfaces
20/30337815 DC BS EN IEC 62057-1. Test equipment, techniques and procedures for electrical energy meters. Part 1. Stationary Meter Test Units (MTU)
BS EN 1967:2002 Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method
BS EN IEC 63203-406-1:2022 Wearable electronic devices and technologies - Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin (IEC 63203-406-1:2021)
PD ISO/TR 23463:2022 Nanotechnologies. Characterization of carbon nanotube and carbon nanofiber aerosols in relation to inhalation toxicity tests
BS ISO/IEC 20543:2019 Information technology. Security techniques. Test and analysis methods for random bit generators within ISO/IEC 19790 and ISO/IEC 15408
23/30457111 DC BS ISO 7392. Fine bubble technology. Evaluation method for determining surface tension of ultrafine bubble dispersions
23/30438675 DC BS ISO 5618-1. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for GaN crystal surface defects - Part 1. Classification of defects
BS EN ISO 10418:2003 Petroleum and natural gas industries. Offshore production Installations. Analysis, design, installation and testing of basic surface process safety systems

Lithuanian Standards Office , Surface Analysis and Testing Technology

LST EN 62137-1-1-2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test (IEC 62137-1-1:2007)
LST EN 62137-1-2-2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test (IEC 62137-1-2:2007)
LST EN 62137-1-3-2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test (IEC 62137-1-3:2008)
LST EN 62137-1-5-2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test (IEC 62137-1-5:2009)
LST EN 13036-1-2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
LST EN 62137-1-4-2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test (IEC 62137-1-4:2009)
LST EN ISO 10545-2:1997 Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:1995, including Technical Corrigendum 1:1997)
LST EN 12740-2000 Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste

Professional Standard - Earthquake, Surface Analysis and Testing Technology

DB/T 21-2007 Technical requirements of instruments in network for earthquake monitoring.The description of common technical parmneter and test method

Group Standards of the People's Republic of China, Surface Analysis and Testing Technology

T/SDIE 17-2023 Technical specification for big data monitoring and analysis of Internet of commercial vehicles
T/CI 085-2022 Technical standards for acquisition, processing, transmission, storage and analysis of portable nanopore sequencing data

ECIA - Electronic Components Industry Association, Surface Analysis and Testing Technology

IS-46-1987 Test Procedure for Resistance to Soldering (Vapor Phase Technique) for Surface Mount Devices

US-ACEI, Surface Analysis and Testing Technology

IPC TM-650 2.3.39-1997 Surface Organic Contaminant Identification Test (Infrared Analytical Method) Revision B(Test Methods Manual)

CEN - European Committee for Standardization, Surface Analysis and Testing Technology

EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures
EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique

Professional Standard - Construction Industry, Surface Analysis and Testing Technology

JGJ/T 302-2013 Technical code for construction process analyzing and monitoring of building engineering
JGJ 302-2013 Technical Specifications for Structural Analysis and Monitoring in the Construction Process of Construction Engineering

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Surface Analysis and Testing Technology

GB/T 36066-2018 Cleanrooms and associated controlled environments—Analysis and application of test technology
GB/T 33559-2017 Technical requirement and method of measurement for signal analyzer of digital terrestrial television
GB/T 33523.701-2017 Geometrical product specifications (GPS)—Surface texture: Areal— Part 701: Calibration and measurement standards for contact (stylus) instruments
GB/T 34916-2017 Nanotechnologies—Multi-walled carbon nanotubes—Determination of amorphous carbon content by thermogravimetric analysis

KR-KS, Surface Analysis and Testing Technology

KS X ISO/IEC/IEEE 29119-4-2018 Software and systems engineering ㅡ Software testing ㅡ Part 4: Test Techniques
KS X IEC 63203-406-1-2023 Wearable electronic devices and technologies — Part 406-1: Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin
KS X ISO/IEC 10729-1-2008 Information technology－Open Systems Interconnection－Conformance test suite for the presentation layer－Part 1：Test suite structure and test purposes for the presentation protocol
KS P 1019-2012(2022) The technology for gene expression analysis using DNA microarrays－Experimental procedures for DNA microarrays with direct labelling and measurement of gene expression
KS X ISO/IEC 30107-3-2021 Information technology — Biometric presentation attack detection —Part 3: Testing and reporting

国家市场监督管理总局、中国国家标准化管理委员会, Surface Analysis and Testing Technology

GB/T 38634.4-2020 Systems and software engineering—Software testing—Part 4：Test techniques
GB/T 38114-2019 Nanotechnologies—Quantitative analysis of the surface oxygen functional groups on graphene materials—Chemical titration method
GB/T 38643-2020 Information technology—Big data—Functional testing requirements for analytic system
GB/T 40128-2021 Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets
GB/Z 38062-2019 Nanotechnologies—Determination of specific surface area of graphene materials—Methylene blue adsorption method
GB/T 40810.1-2021 Geometrical product specifications (GPS)—Online measurement in process—Part 1:Online verification of geometric features (size and surface texture)
GB/T 33523.71-2020 Geometrical product specifications (GPS)—Surface texture: Areal—Part 71: Software measurement standards
GB/T 33523.70-2020 Geometrical product specification (GPS)—Surface texture: Areal—Part 70: Material measures

Professional Standard - Medicine, Surface Analysis and Testing Technology

YY/T 1248-2014 Hepatitis B virus surface antibody (HBsAb) detection reagent (kit) (Chemiluminescent immunoassay)
YY/T 1247-2014 Hepatitis B virus surface antigen (HBsAg) detection reagent(kit) (Chemiluminescent immunoassay)

International Electrotechnical Commission (IEC), Surface Analysis and Testing Technology

IEC 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface-mount solder joints - Part 1-4: Cyclic bending test
IEC 62137-1-3:2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test
IEC 62057-1:2023 Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs)
IEC 62137-1-2:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test
IEC 62137-1-1:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
IEC 63203-406-1:2021 Wearable electronic devices and technologies - Part 406-1: Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin
ISO/IEC 30107-3:2017 Information technology - Biometric presentation attack detection - Part 3: Testing and reporting

Japanese Industrial Standards Committee (JISC), Surface Analysis and Testing Technology

JIS C 62137-1-3:2011 Surface mounting technology -- Environmental and endurance test methods for surface mount solder joint -- Part 1-3: Cyclic drop test
JIS C 62137-1-4:2011 Surface mounting technology -- Environmental and endurance test methods for surface mount solder joint -- Part 1-4: Cyclic bending test
JIS C 62137-1-1:2010 Surface mounting technology -- Environmental and endurance test methods for surface mount solder joint -- Part 1-1: Pull strength test
JIS C 62137-1-2:2010 Surface mounting technology -- Environmental and endurance test methods for surface mount solder joint -- Part 1-2: Shear strength test
JIS C 62137-1-5:2011 Surface mounting technology -- Environmental and endurance test methods for surface mount solder joints -- Part 1-5: Mechanical shear fatigue test
JIS B 0671-1:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions
JIS B 0659-1:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures
JIS X 9305-2:2021 Information technology -- User interfaces -- Voice commands -- Part 2: Constructing and testing

European Committee for Electrotechnical Standardization（CENELEC）, Surface Analysis and Testing Technology

EN 62137-1-3:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test
FprEN IEC 62057-1:2022 Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs)
EN 62137-1-1:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
EN 62137-1-2:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test
EN 62137-1-5:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test
EN 60068-2-69:2007 Environmental testing - Part 2-69: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method
EN 60068-2-69:2017 Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method

CENELEC - European Committee for Electrotechnical Standardization, Surface Analysis and Testing Technology

EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test
EN 62137-4:2014 Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices
EN 60068-2-69:1996 Environmental Testing Part 2: Tests Test Te: Solderability Testing of Electronic Components for Surface Mount Technology by the Wetting Balance Method

PL-PKN, Surface Analysis and Testing Technology

PN P01714-1992 Knitted fabrics and articles. List of technological and utilization indexes and test methods

Guizhou Provincial Standard of the People's Republic of China, Surface Analysis and Testing Technology

DB52/T 1395-2018 Technical Specifications for Meteorological Observation and Analysis of Meteorological Conditions at the Proposed Airport Site

AENOR, Surface Analysis and Testing Technology

UNE-EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
UNE 55827:1992 SURFACE ACTIVE AGENTS. EVALUATION OF CERTAIN EFFECTS OF LAUNDERING. METHODS OF ANALYSIS AND TEST FOR UNSOILED COTTON CONTROL CLOTH.
UNE-EN ISO 10545-2:1998 CERAMIC TILES. PART 2: DETERMINATION OF DIMENSIONS AND SURFACE QUALITY (ISO 10545-2:1995, INCLUDING TECHNICAL CORRIGENDUM 1:1997).
UNE-EN 12740:2000 Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste

Professional Standard - Grain, Surface Analysis and Testing Technology

LS/T 3706-2012 Test instrument of grain and oils.Technical requirements and test method for automatic titration analyzer
LS/T 3705-2010 Technical requirements and test method for quick moisture conten tester of waterlogged suspend

ESDU - Engineering Sciences Data Unit, Surface Analysis and Testing Technology

TM 189-2018 Techmical Memorandum Analysis of Tests on a Convergent Nozzle in an Altitude Test Facility

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Surface Analysis and Testing Technology

JEDEC JEP150-2005 Stress-Test-Driven Qualification of and Failure Mechanisms Associated with Assembled Solid State Surface- Mount Components
JEDEC JEP179-2006 Stress-Test-Driven Qualification of and Failure Mechanisms Associated with Assembled Solid State Surface- Mount Components

Professional Standard - Post and Telecommunication, Surface Analysis and Testing Technology

YD/T 4280-2023 5G mobile communication network N4 (core network control plane and user plane) interface technical requirements and test methods
YD/T 4244-2023 Technical requirements and test methods for telecommunication network and Internet data classification and classification

Henan Provincial Standard of the People's Republic of China, Surface Analysis and Testing Technology

DB41/T 1979-2020 Technical specifications for the construction and acceptance of bedrock marks and layered marks for land subsidence monitoring

Professional Standard - Petrochemical Industry, Surface Analysis and Testing Technology

NB/SH/T 0843-2010 Standard practice for evaluating analytical measurement system performance of petrochemical industry(Statistical techniques)

Standard Association of Australia （SAA）, Surface Analysis and Testing Technology

AS 1766.1.4:1991 Food microbiology - General procedures and techniques - Colony count - Surface spread method
AS 1289.5.8.9:1998(R2013)

Indonesia Standards, Surface Analysis and Testing Technology

SNI 2332.8-2010 Microbiology test methods - Part 8: Determination of the number of bacteria on the surface of fish and fish processing equipment (the swab technique)

American Society of Mechanical Engineers (ASME), Surface Analysis and Testing Technology

ASME B89.7.4.1-2005 Measurement Uncertainty and Conformance Testing: Risk Analysis

Society of Automotive Engineers (SAE), Surface Analysis and Testing Technology

SAE AS6171/10-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Thermogravimetric Analysis (TGA) Test Methods

Canadian Standards Association (CSA), Surface Analysis and Testing Technology

CSA ISO/IEC 14496-4-06-CAN/CSA CORR 2:2008 Information technology ?Coding of audio-visual objects ?Part 4: Conformance testing TECHNICAL CORRIGENDUM 2
CSA IEC 61000-4-5-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 5: Surge Immunity Test First Edition

Professional Standard - Machinery, Surface Analysis and Testing Technology

JB/T 11939-2014 The technical conditions and test evaluation method for crude oil water analytical instrument by RF

SE-SIS, Surface Analysis and Testing Technology

SIS SS-ISO 3334:1990 Micrographics — ISO resolution test chart No. 2 — Description and use

Institute of Electrical and Electronics Engineers (IEEE), Surface Analysis and Testing Technology

IEEE/ISO/IEC 29119-4-2015 ISO/IEC/IEEE International Standard - Software and systems engineering--Software testing--Part 4: Test techniques

Professional Standard - Electricity, Surface Analysis and Testing Technology

DL/T 698.51-2016 Electric Energy Information Collection and Management System Part 5-1: Test Specifications—Functional Test

API - American Petroleum Institute, Surface Analysis and Testing Technology

API RP 42-1962 RECOMMENDED PRACTICE FOR LABORATORY TESTING AND FIELD DATA ANALYSIS OF SURFACE-ACTIVE AGENTS FOR WELL STIMULATION (First Edition)
API RP 14C ERTA-1984 RECOMMENDED PRACTICE FOR ANALYSIS@ DESIGN@ INSTALLATION AND TESTING OF BASIC SURFACE SAFETY SYSTEMS FOR OFFSHORE PRODUCTION PLATFORMS (Third Edition)
API RP 14C-1986 RECOMMENDED PRACTICE FOR ANALYSIS@ DESIGN@ INSTALLATION AND TESTING OF BASIC SURFACE SAFETY SYSTEMS FOR OFFSHORE PRODUCTION PLATFORMS FOURTH EDITION; ERRATA - NOVEMBER 1986

American National Standards Institute （ANSI), Surface Analysis and Testing Technology

ANSI/ASSE TR-A1264.3-2007 Technical Report: Using Variable Angle Tribometers (VAT) for Measurement of the Slip Resistance of Walkway Surfaces
ANSI/ASTM D6299:2021 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ANSI/ASTM D6299:2013 Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

AT-OVE/ON, Surface Analysis and Testing Technology

OVE EN IEC 63203-406-1:2021 Wearable electronic devices and technologies - Part 406-1: Test method for measuring surface temperature of wrist worn wearable electronic devices while in contact with human skin (IEC 124/125/CDV) (english version)

IX-ISO/IEC, Surface Analysis and Testing Technology

ISO/IEC 10373-2:2006/Cor 1:2010 Identification cards — Test methods — Part 2: Cards with magnetic stripes — Technical Corrigendum 1
ISO/IEC 10164-14:1996/Cor 2:2002 Corrigendum 2 - Information technology -- Open Systems Interconnection -- Systems Management: Confidence and diagnostic test categories -
ISO/IEC 8882-3:1995/Cor 1:1997 Information technology — Telecommunications and information exchange between systems — X.25 DTE conformance testing — Part 3: Packet layer conformance test suite — Technical Corrigendum 1

Shandong Provincial Standard of the People's Republic of China, Surface Analysis and Testing Technology

DB37/T 3827-2019 Technical regulations for field testing of nutrient release rate and release period of slow and controlled release fertilizers

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Surface Analysis and Testing Technology

ITU-T Z.141-2003 Testing and Test Control Notation version 3 (TTCN-3): Tabular presentation format SERIES Z: LANGUAGES AND GENERAL SOFTWARE ASPECTS FOR TELECOMMUNICATION SYSTEMS Formal description techniques (FDT) – Testing and Test Control Notation (TTCN) (Study Group 17