ZH

RU

ES

Determining the density of particulate matter

Determining the density of particulate matter, Total:499 items.

In the international standard classification, Determining the density of particulate matter involves: Refractories, Construction materials, Cutting tools, Fuels, Soil quality. Pedology, Particle size analysis. Sieving, Cork and cork products, Measurement of volume, mass, density, viscosity, Packaging and distribution of goods in general, Air quality, Pesticides and other agrochemicals, Continuous handling equipment, Paint ingredients, Fertilizers, Ceramics, Adhesives, Road engineering, Vocabularies, Non-ferrous metals, Domestic, commercial and industrial heating appliances, Products of the chemical industry, Environmental protection, Metalliferous minerals, Nuclear energy engineering, Raw materials for rubber and plastics, Earthworks. Excavations. Foundation construction. Underground works, Paints and varnishes, Mining and quarrying, Inorganic chemicals, Analytical chemistry, Wastes, Measurement of fluid flow, Tobacco, tobacco products and related equipment, Natural gas, Fluid power systems, Aerospace electric equipment and systems, Chipless working equipment, Petroleum products in general, Lubricants, industrial oils and related products, Water quality, Leather technology, Tyres, Protection against fire, Farming and forestry, Clothes, Products of the textile industry, Animal feeding stuffs, Magnetic materials, Plastics, Conducting materials, Rubber, Cereals, pulses and derived products.


European Committee for Standardization (CEN), Determining the density of particulate matter

  • EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • prEN ISO 18847 rev Solid biofuels — Determination of particle density of pellets and briquettes
  • EN 15150:2011 Solid biofuels - Determination of particle density
  • EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
  • CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
  • FprEN 1097-6-2021 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
  • EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
  • EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
  • EN ISO 5370:2023 Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)
  • EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
  • PREN 1097-7-2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
  • EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
  • EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
  • PD CEN/TR 12333:2021 Fertilizers - Crushing strength determination on fertilizers grains
  • EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
  • EN ISO 11508:2017 Soil quality - Determination of particle density
  • EN 993-17:1998 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • EN 12039:2016 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
  • PD CEN/TS 17189:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry
  • EN ISO 17831-1:2015 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
  • FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN ISO 11508:2014 Soil quality - Determination of particle density
  • EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements

Association Francaise de Normalisation, Determining the density of particulate matter

  • NF P18-650-7*NF EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7 : determination of the particle density of filler - Pyknometer method.
  • NF X34-112*NF EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
  • NF X31-554:2014 Soil quality - Determination of particle density
  • NF X31-554:1998 Soil quality. Determination of particle density.
  • NF X31-554*NF EN ISO 11508:2017 Soil quality - Determination of particle density
  • NF ISO 2031:2015 Granulés de liège - Détermination de la masse volumique apparente
  • NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
  • NF EN ISO 18847:2016 Biocombustibles solides - Détermination de la masse volumique unitaire des granulés et des briquettes
  • NF ISO 1306:2005 Ingrédients de mélange du caoutchouc - Noir de carbone (en granules) - Détermination de la masse volumique apparente
  • NF EN ISO 17830:2016 Biocombustibles solides - Détermination de la distribution granulométrique des granulés désintégrés
  • NF EN ISO 17831-1:2016 Biocombustibles solides - Détermination de la résistance mécanique des granulés et des briquettes - Partie 1 : granulés
  • NF EN 543:2003 Adhésifs - Détermination de la masse volumique apparente des adhésifs en poudre et en granules
  • NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
  • NF X34-111*NF EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets
  • NF EN ISO 17829:2016 Biocombustibles solides - Détermination de la longueur et du diamètre des granulés
  • NF P18-650-6:2014 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
  • NF P18-650-6*NF EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
  • NF T30-044:1968 Paints. Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method.
  • FD U42-413*FD CEN/TR 12333:2021 Fertilizers - Crushing strength determination on fertilizer grains
  • NF X11-634:1988 Granulométrie - Caractérisation de la taille et de la forme des éléments d'une population granulaire
  • NF T51-003:1977 DETERMINATION OF APPARENT DENSITY OF MOULDING MATERIALS.
  • NF ISO 9278:2009 Énergie nucléaire - Pastilles de dioxyde d'uranium - Détermination de la masse volumique et de la fraction volumique de pores ouverts et fermés
  • NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
  • NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
  • NF P94-512-3*NF EN ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3 : determination of particle density
  • NF E75-231:1993 Abrasive macrograins. Determination of bulk density.
  • NF X34-114-1*NF EN ISO 17831-1:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1 : pellets
  • NF B57-012*NF ISO 2031:2015 Granulated cork - Determination of apparent bulk density
  • NF ISO 9136-2:1999 Grains abrasifs - Détermination de la masse volumique apparente - Partie 2 : micrograins
  • NF V37-001*NF ISO 4387:2020 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
  • NF E75-231-1*NF ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Part 1 : macrogrits.
  • NF EN ISO 5370:2023 Biocombustibles solides - Détermination de la teneur en fines des granulés
  • NF EN 15415-2:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Méthode (manuelle) de projection de la longueur maximale des particules de grande dimension
  • NF U42-620*NF EN ISO 7837:2000 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers
  • NF EN ISO 17892-3:2015 Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 3 : détermination de la masse volumique des particules solides
  • NF ISO 4387:2020 Cigarettes - Détermination de la teneur en matière particulaire totale et en matière particulaire anhydre et exempte de nicotine au moyen d'une machine à fumer analytique de routine
  • NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • NF B40-340*NF EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum
  • NF T45-155:2005 Rubber compounding ingredients - Carbon black - Determination of individual pellet crushing strength.
  • NF EN ISO 21483:2018 Détermination de la solubilité dans l'acide nitrique du plutonium des pastilles (U, Pu) O2 de combustibles d'oxydes mixtes non irradiés
  • NF B57-012:1973 Cork. Granulated unprocessed cork. Determination of density.
  • NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
  • NF EN ISO 18846:2016 Biocombustibles solides - Détermination de la teneur en fines dans les quantités de granulés
  • NF EN 15415-1:2011 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 1 : méthode de criblage pour des particules de petites dimensions
  • NF ISO 6344-2:2022 Abrasifs appliqués - Détermination et désignation de la distribution granulométrique - Partie 2 : macrograins P12 à P220
  • NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
  • NF U42-402:1985 Fertilizers. Determination of bulk density (loose) of fine-grained fertilizers.
  • NF EN 15415-3:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 3 : méthode par analyse d'images des particules de grande dimension
  • NF EN 12341:2014 Air ambiant - Méthode normalisée de mesurage gravimétrique pour la détermination de la concentration massique MP10 ou MP2,5 de matière particulaire en suspension
  • NF EN ISO 20049-1:2020 Biocombustibles solides - Détermination de l'auto-échauffement des granulés de biocombustibles - Partie 1 : détermination calorimétrique isotherme

Korean Agency for Technology and Standards (KATS), Determining the density of particulate matter

  • KS M ISO 18847:2022 Solid biofuels — Determination of particle density of pellets and briquettes
  • KS I ISO 11508-2009(2014) Soil quality-Determination of particle density
  • KS M ISO 2031:2020 Granulated cork — Determination of apparent bulk density
  • KS I ISO 9096:2009 Stationary source emissions-Manual determination of mass concentration of particulate matter
  • KS M ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
  • KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
  • KS E ISO 4700:2010 Iron ore pellets for blast furnace and direct reduction feedstocks-Determination of the crushing strength
  • KS E ISO 4700:2017 Iron ore pellets for blast furnace and direct reduction feedstocks-Determination of the crushing strength
  • KS M ISO 8511-2007(2022) Rubber compounding ingredients-Carbon black-Determination of pellet size distribution
  • KS M ISO 8511-2007(2017) Rubber compounding ingredients-Carbon black-Determination of pellet size distribution
  • KS I ISO 12141:2017 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method
  • KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • KS L ISO 14703:2001 Fine ceramics(advanced ceramics, advanced technical ceramics)-Sample preparation for the determination of particle size distribution of ceramic powders
  • KS L 6523-2016 Coated abrasives-Determination of grain size distribution of microgrits P12 to P220
  • KS L ISO 14703:2016 Fine ceramics(advanced ceramics, advanced technical ceramics)-Sample preparation for the determination of particle size distribution of ceramic powders
  • KS A ISO 9278-2014(2019) Nuclear energy — Uranium dioxide pellets — Determination of density and volume fraction of open and closed porosity
  • KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
  • KS M ISO 17831-1:2021 Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets
  • KS I ISO 11508:2009 Soil quality-Determination of particle density
  • KS M ISO 7837:2007 Fertilizers-Determination of bulk density (loose) of fine-grained fertilizers
  • KS M ISO 2031:2004 Granulated cork-Determination of bulk density
  • KS M ISO 7837:2013 Fertilizers-Determination of bulk density (loose) of fine-grained fertilizers
  • KS H ISO 15593:2009 Environmental tobacco smoke-Estimation of its contribution to respirable suspended particles-Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • KS M ISO 3379-2016(2021) Leather-Determination of distension and strength of grain-Ball burst test
  • KS K 0511-2009 Measuring method for thread per unit length in woven cloth
  • KS K 0511-1999 Measuring method for thread per unit length in woven cloth
  • KS H ISO 15593-2009(2019) Environmental tobacco smoke-Estimation of its contribution to respirable suspended particles-Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • KS I ISO 12141:2007 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method

KR-KS, Determining the density of particulate matter

  • KS M ISO 18847-2022 Solid biofuels — Determination of particle density of pellets and briquettes
  • KS M ISO 2031-2020 Granulated cork — Determination of apparent bulk density
  • KS M ISO 17829-2021 Solid Biofuels — Determination of length and diameter of pellets
  • KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
  • KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • KS M ISO 18846-2021 Solid biofuels — Determination of fines content in samples of pellets
  • KS I ISO 12141-2017 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method
  • KS M ISO 17831-1-2021 Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets

German Institute for Standardization, Determining the density of particulate matter

  • DIN EN ISO 18847:2016-12 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
  • DIN EN ISO 18847:2023-07 Solid biofuels - Determination of particle density of pellets and briquettes (ISO/DIS 18847:2023); German and English version prEN ISO 18847:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN ISO 18847 (2016-12).
  • DIN EN ISO 11508:2018-04 Soil quality - Determination of particle density (ISO 11508:2017); German version EN ISO 11508:2017
  • DIN EN 15150:2012 Solid biofuels - Determination of particle density; German version EN 15150:2011
  • DIN CEN/TS 15405:2010-11*DIN SPEC 1152:2010-11 Solid recovered fuels - Determination of density of pellets and briquettes; German version CEN/TS 15405:2010
  • DIN ISO 9136-1:2006-03 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
  • DIN EN 543:2003-08 Adhesives - Determination of apparent density of powder and granule adhesives; German version EN 543:2003
  • DIN EN ISO 17829:2016-03 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015); German version EN ISO 17829:2015
  • DIN EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
  • DIN 18124:2019-02 Soil, investigation and testing - Determination of density of solid particles - Wide mouth pycnometer
  • DIN EN 1097-6:2022-05 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2022
  • DIN EN 1097-6:2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005
  • DIN EN 1097-6:2020 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German and English version prEN 1097-6:2020
  • DIN 54408:1998 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
  • DIN 54408:2007 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
  • DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
  • DIN 25495:1991 Determination of density and total porosity of uranium dioxide pellets by the mercury displacement method
  • DIN EN 1097-7:2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German and English version prEN 1097-7:2020
  • DIN EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; English version of DIN EN 1097-7:2008-06
  • DIN EN 1097-7:2022-12 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2022
  • DIN EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
  • DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
  • DIN EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
  • DIN EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
  • DIN 25494:1991-04 Determination of density and open and closed porosity of uranium dioxide pellets; boiling water and immersion method
  • DIN EN ISO 17892-3:2016-07 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15); German version EN ISO 17892-3:2015
  • DIN EN ISO 17831-1:2016-05 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015); German version EN ISO 17831-1:2015
  • DIN CEN/TS 17189:2018-08*DIN SPEC 78003:2018-08 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry; German version CEN/TS 17189:2018
  • DIN EN ISO 11508:2014 Soil quality - Determination of particle density (ISO 11508:1998); German version EN ISO 11508:2014
  • DIN ISO 4387:2021-03 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine (ISO 4387:2019)
  • DIN EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
  • DIN ISO 9136-1:2006 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004);English version of DIN ISO 9136-1:2006-03
  • DIN EN ISO 18846:2016 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
  • DIN EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2013
  • DIN EN ISO 17831-1:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
  • DIN ISO 11508:2002 Soil quality - Determination of particle density (ISO 11508:1998)
  • DIN 18124:1997 Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer
  • DIN EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
  • DIN EN ISO 18846:2016-12 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016); German version EN ISO 18846:2016 / Note: To be replaced by DIN EN ISO 5370 (2022-03).
  • DIN EN 1097-6 Berichtigung 1:2008 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005, Corrigendum to DIN EN 1097-6:2005-12
  • DIN ISO 4576:2001-03 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
  • DIN EN 1097-7 Berichtigung 1:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2008, Corrigendum to DIN EN 1097-7:2008-06
  • DIN EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements; German version EN 14530:2004
  • DIN 51813:1989 Determination of solid matter content of lubricating greases (particle sizes above 25 m)
  • DIN EN 14530:2004-06 Workplace atmospheres - Determination of diesel particulate matter - General requirements; German version EN 14530:2004
  • DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
  • DIN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density, Pycnometer method (ISO/TS 17892-3:2004); German version CEN ISO/TS 17892-3:2004
  • DIN EN 15415-1:2011-11 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles; German version EN 15415-1:2011

ES-UNE, Determining the density of particulate matter

  • ISO/DIS 18847:2023 Solid biofuels — Determination of particle density of pellets and briquettes
  • UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
  • UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
  • UNE-CEN/TR 12333:2021 Fertilizers - Crushing strength determination on fertilizers grains (Endorsed by Asociación Española de Normalización in July of 2021.)
  • UNE-EN ISO 17892-3:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15)
  • UNE-EN ISO 17831-1:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
  • UNE-CEN/TS 17189:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry (Endorsed by Asociación Española de Normalización in May of 2020.)
  • UNE-ISO 4387:2008/Amd 2:2018 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-ISO 4387:2008/Amd.1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol (Endorsed by Asociación Española de Normalización in January of 2021.)
  • UNE-EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • UNE-EN 61788-9:2005 Superconductivity -- Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors (Endorsed by AENOR in November of 2005.)
  • UNE-EN ISO 5370:2023 Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)

British Standards Institution (BSI), Determining the density of particulate matter

  • BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
  • BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
  • BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
  • 21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
  • BS ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Macrogrits
  • BS DD CEN/TS 15150:2005 Solid biofuels — Methods for the determination of particle density
  • BS DD CEN/TS 15150:2006 Solid biofuels. Methods for the determination of particle density
  • BS ISO 18747-1:2018 Determination of particle density by sedimentation methods - Isopycnic interpolation approach
  • BS ISO 18747-2:2019 Determination of particle density by sedimentation methods - Multi-velocity approach
  • BS EN ISO 18847:2016 Solid biofuels. Determination of particle density of pellets and briquettes
  • BS EN ISO 11508:2017 Tracked Changes. Soil quality. Determination of particle density
  • BS DD CEN/TS 15405:2010 Solid recovered fuels. Determination of density of pellets and briquettes
  • BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • 23/30464630 DC BS EN ISO 18847. Solid biofuels. Determination of particle density of pellets and briquettes
  • BS EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Determination of particle density and water absorption
  • BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
  • 19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • BS DD CEN/TS 15405:2006 Solid recovered fuels. Methods for the determination of density of pellets and briquettes
  • DD CEN/TS 15405:2006 Solid recovered fuels — Methods for the determination of density of pellets and briquettes
  • BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
  • BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
  • BS EN 1097-6:2022 Tracked Changes. Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
  • BS EN ISO 18846:2016 Solid biofuels. Determination of fines content in quantities of pellets
  • BS EN 1097-7:2022 Tracked Changes. Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler. Pyknometer method
  • BS EN 15150:2011 Solid biofuels. Determination of particle density
  • BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
  • BS EN ISO 17892-3:2015 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle density
  • 20/30392580 DC BS EN 1097-6. Tests for mechanical and physical properties of aggregates. Part 6. Determination of particle density and water absorption
  • BS PD CEN/TR 12333:2021 Fertilizers. Crushing strength determination on fertilizers grains
  • 20/30424361 DC BS EN 1097-7. Tests for mechanical and physical properties of aggregates - Part 7. Determination of the particle density of filler. Pyknometer method
  • BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
  • BS EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler — Pyknometer method
  • BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
  • BS ISO 15900:2020 Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
  • BS ISO 4387:2019 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • BS ISO 4387:2000+A2:2017 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • BS EN ISO 5370:2023 Solid biofuels. Determination of fines content in pellets
  • BS ISO 17175:2017 Bidis. Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine
  • BS ISO 2031:2015 Granulated cork. Determination of apparent bulk density
  • BS ISO 8942:2010 Rubber compounding ingredients. Carbon black. Determination of individual pellet crushing strength
  • BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • 19/30370177 DC BS ISO 15900. Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
  • BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
  • 17/30337552 DC BS ISO 17175. Bidis. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
  • BS EN 14530:2004(2009) Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • BS EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • PD CEN ISO/TS 20049-2:2022 Solid biofuels. Determination of self-heating of pelletized biofuels. Basket heating tests

RU-GOST R, Determining the density of particulate matter

  • GOST 33507-2015 Solid biofuel. Determination of particle density
  • GOST R 55124-2012 Solid biofuels. Determination of particle density
  • GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
  • GOST 21560.2-1982 Mineral fertilizers. Method for determination of granules static strength
  • GOST R 55550-2013 Solid biofuels. Determination of particle size distribution of disintegrated pellets
  • GOST 21073.2-1975 Non-ferrous metals. Determination of grain size bu grain calculation method
  • GOST R ISO 9096-2006 Stationary source emissions. Manual determination of mass concentration of particulate matter
  • GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
  • GOST R ISO 12984-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
  • GOST R 55110-2012 Solid biofuels. Determination of mechanical durability of pellets and briquettes. Part 1. Pellets
  • GOST 28512.3-1990 Mineral fertilizers. Method for determination of bulk density (loose) of fine-grained fertilizers
  • GOST 25699.16-1990 Carbon black for rubber industry. Method for determination of individual pellet crushing strength
  • GOST 26312.4-1984 Groats. Methods for determination of grain size, admixture content and sound kernels

Danish Standards Foundation, Determining the density of particulate matter

  • DS/EN 15150:2012 Solid biofuels - Determination of particle density
  • DS/ISO 11508:1999 Soil quality - Determination of particle density
  • DS/CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
  • DS/EN 16126:2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
  • DS 406.2:1987 Lightweight aggregates for concrete. Determination of grain density and water absorption
  • DS/EN 543:2003 Adhesives - Determination of apparent density of powder and granule adhesives
  • DS/EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
  • DS/EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
  • DS/EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
  • DS/CEN/CR 12333:2006 Fertilizers - Crushing strength determination on fertilizer grains
  • DS/CEN/TR 12333:2021 Fertilizers – Crushing strength determination on fertilizers grains
  • DS/EN 15210-1:2010 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
  • DS/ISO 4387/Amd. 1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • DS/ISO 4387:2000 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • DS/EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • DS/EN ISO 7837:2000 Fertilizeres - Determination of bulk density (loose) of fine-grained fertilizers
  • DS/EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
  • DS/ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • DS/EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles

Lithuanian Standards Office , Determining the density of particulate matter

  • LST EN 15150-2012 Solid biofuels - Determination of particle density
  • LST CEN/TS 15405-2010 Solid recovered fuels - Determination of density of pellets and briquettes
  • LST EN 16126-2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
  • LST EN 543-2003 Adhesives - Determination of apparent density of powder and granule adhesives
  • LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
  • LST EN 16127-2012 Solid biofuels - Determination of length and diameter of pellets
  • LST EN 1097-6+AC-2003 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
  • LST EN 1097-6+AC-2003/A1-2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
  • LST EN 1097-6-2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
  • LST EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
  • LST EN 15210-1-2010 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
  • LST ISO 4387:2000 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • LST EN 14530-2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • LST EN 15415-1-2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles

VN-TCVN, Determining the density of particulate matter

  • TCVN 6863-2001 Soil quality.Determination of particle density
  • TCVN 4852-1989 Mineral fertilizers.Determination of grain static strength
  • TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
  • TCVN 6530-12-2007 Refractories.Method of test.Part 12: Determination of bulk density of granular materials

ES-AENOR, Determining the density of particulate matter

AENOR, Determining the density of particulate matter

  • UNE-EN ISO 18847:2017 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016)
  • UNE 103302:1994 DETERMINATION OF THE RELATIVE DENSITY OF THE PARTICLES OF A SOIL.
  • UNE-EN 543:2003 Adhesives - Determination of apparent density of powder and granule adhesives
  • UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
  • UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
  • UNE-EN 1097-7:2009 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
  • UNE 103900:2013 In situ determination of density and moisture content of soil and granular materials by nuclear methods: low depths.
  • UNE-ISO 4387:2008 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-ISO 4387:2008/A1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
  • UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
  • UNE-EN ISO 18846:2017 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
  • UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
  • UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • UNE-ISO 15593:2010 Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • UNE-EN 15415-1:2012 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles

CEN - European Committee for Standardization, Determining the density of particulate matter

  • PD CEN/TS 15150:2005 Solid biofuels - Methods for the determination of particle density
  • PD CEN/TS 15405:2006 Solid recovered fuels - Methods for the determination of density of pellets and briquettes
  • EN 12039:1999 Flexible Sheets for Waterproofing - Bitumen Sheets for Roof Waterproofing - Determination of Adhesion of Granules
  • PD CEN/TS 15210-1:2005 Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets
  • EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2@5)

International Organization for Standardization (ISO), Determining the density of particulate matter

  • ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
  • ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
  • ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
  • ISO 18747-1:2018 Determination of particle density by sedimentation methods - Part 1: Isopycnic interpolation approach
  • ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
  • ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
  • ISO 18747-2:2019 Determination of particle density by sedimentation methods — Part 2: Multi-velocity approach
  • ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
  • ISO 4700:1983 Iron ore pellets; Determination of crushing strength
  • ISO 5370:2023 Solid biofuels — Determination of fines content in pellets
  • ISO 6783:1982 Coarse aggregates for concrete; Determination of particle density and water absorption; Hydrostatic balance method
  • ISO 9096:2003/cor 1:2006 Stationary source emissions - Manual determination of mass concentration of particulate matter; Technical Corrigendum 1
  • ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • ISO 4365:2005 Liquid flow in open channels - Sediment in streams and canals - Determination of concentration, particle size distribution and relative density
  • ISO 4365:1985 Liquid flow in open channels; Sediment in streams and canals; Determination of concentration, particle size distribution and relative density
  • ISO 11508:2017 Soil quality - Determination of particle density
  • ISO 2031:1991 Granulated cork; determination of bulk density
  • ISO 2031:2015 Granulated cork - Determination of apparent bulk density
  • ISO 9136-1:2004 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
  • ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
  • ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • ISO 7837:1983 Fertilizers — Determination of bulk density (loose) of fine-grained fertilizers
  • ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
  • ISO/TS 17892-3:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
  • ISO/TR 8942:1988 Rubber compounding ingredients; carbon black; determination of individual pellet crushing strength
  • ISO/TS 17892-3:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
  • ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
  • ISO 6276:1982 Concrete, compacted fresh; Determination of density

未注明发布机构, Determining the density of particulate matter

  • BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
  • BS EN 543:2003(2007) Adhesives — Determination of apparent density of powder and granule adhesives
  • DIN EN 1097-6:2001 Tests for mechanical and physical properties of aggregates — Part 6: Determination of particle density and water absorption
  • JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
  • DIN EN 1097-7:1999 Tests for mechanical and physical properties of aggregates — Part 7: Determination of the particle density of filler — Pycnometer method
  • BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • BS EN ISO 7837:2001(2010) Fertilizers — Determination of bulk density (loose) of fine - grained fertilizers

CU-NC, Determining the density of particulate matter

  • NC 43-09-1968 Particle boards and fibre boards Determinatipn of density
  • NC 43-08-1-1987 Artificial and Natural Wood Induistry. Partiole and Fibre Boards. Determination of Density

NL-NEN, Determining the density of particulate matter

  • NEN 5926-1990 Aggregates for concrete - Determination of partiele density
  • NEN 5932-1990 Aggregates for concrete - Determination of partiele strength

American National Standards Institute (ANSI), Determining the density of particulate matter

RO-ASRO, Determining the density of particulate matter

AT-ON, Determining the density of particulate matter

  • ONORM A 5561-2001 Determination of settled and compacted apparent densities of powders and granulated materials

Canadian Standards Association (CSA), Determining the density of particulate matter

  • CSA ISO 18847:2021 Solid biofuels - Determination of particle density of pellets and briquettes (Adopted ISO 18847:2016, first edition, 2016-09-01)

American Society of Mechanical Engineers (ASME), Determining the density of particulate matter

American Society for Testing and Materials (ASTM), Determining the density of particulate matter

  • ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
  • ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
  • ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
  • ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
  • ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM E382-07 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
  • ASTM E2558-13 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
  • ASTM D3685/D3685M-13(2021) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
  • ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM D5644-96 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Vulcanized Particulate Rubber
  • ASTM D4699-03(2018)e1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
  • ASTM D4699-03(2018) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

YU-JUS, Determining the density of particulate matter

  • JUS H.P5.011-1991 Testing of pesticides.Dusts,granules,microgranules and water-dispersible powder.Determination of bulk density
  • JUS B.B8.031-1982 Crushed aggregate. Determination of particle density and water absorption
  • JUS B.D8.311-1984 Refractories. Methods of physical testing. Determ inati on of the bulk density of granular refractory materials and raws
  • JUS K.F0.006-1988 Grains of fused alumininm oxfdo and silJcon carbide for abrasivo products. DeterminatIon of the buJk densfty of tbe abraslve grains
  • JUS H.B8.817-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Determination of the particle size (granulometry)
  • JUS K.F0.005-1989 Gralns of fused alumiuium oxide and silicon carbide for boodod abrasivc products. Particle si?e measurement of microgrfts by Eppendorf - photosedimentometer
  • JUS B.B8.105-1984 Testing of mineral filher. The deter,omatopm of grain sin distribution

BE-NBN, Determining the density of particulate matter

Institute of Environmental Sciences and Technology, Determining the density of particulate matter

CZ-CSN, Determining the density of particulate matter

  • CSN 72 1011-1980 Laboratory determination of apparent density of solid particles of soils
  • CSN ISO 8840:1992 Rfractory materials. Determination of bulk density of granular materials (grain density)
  • CSN 65 4824-1982 Fertilizers. Method for the determination of static strongth o? granules
  • CSN 65 4823-1982 Minerál fertilizers Method for the determination of granulometric composilion
  • CSN 46 1011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)
  • CSN 65 4812-1969 Determination of size and mechanical strength of granules in fertilizers
  • CSN 65 6220-1984 Oils. Determination of particulate contaminant on membrane filter
  • CSN 83 4611-1982 Measurement of solid particulate emissions from stationary sources
  • CSN 46 7092-38-1998 Testing methods for feeding stuffs - Part 38: Determination of granules strength when pressed

IT-UNI, Determining the density of particulate matter

Professional Standard - Machinery, Determining the density of particulate matter

  • JB/T 9014.3-1999 Continuous handling equipment.Loose bulk material.Determination of composition of size and pellet
  • JB/T 9014.4-1999 Continuous handling equipment.Loose bulk material.Determination of density
  • JB/T 7984.2-1999 Conventional abrasive.Determination of bulk density of macrogrits

PH-BPS, Determining the density of particulate matter

  • PNS ISO 9136-1:2021 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
  • PNS ISO 17892-3:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density

SAE - SAE International, Determining the density of particulate matter

  • SAE ARP598A-1969 The Determination of Particulate Contamination in Liquids by the Particle Count Method
  • SAE ARP598B-1986 Determination of Particulate Contamination in Liquids by the Particle Count Method

Professional Standard - Chemical Industry, Determining the density of particulate matter

  • HG/T 3400-2001 Determination of granule fineness of dyes
  • HG/T 2224-1991 Determination of granular average compressive strength of granular double superphosphate

Association of German Mechanical Engineers, Determining the density of particulate matter

  • VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
  • VDI 3491 Blatt 1-1980 Particulate matter measurement; characteristics of suspended particulate matter in gases; terms and definitions
  • VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
  • VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
  • VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
  • VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
  • VDI 2268 Blatt 3-1988 Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry
  • VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
  • VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
  • VDI 2268 Blatt 1-1987 Chemical analysis of particulate matter; determination of Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in particulate emissions by atomic spectrometric methods
  • VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
  • VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)

Society of Automotive Engineers (SAE), Determining the density of particulate matter

  • SAE ARP598B-1991 THE DETERMINATION OF PARTICULATE CONTAMINATION IN LIQUIDS BY THE PARTICLE COUNT METHOD

Japanese Industrial Standards Committee (JISC), Determining the density of particulate matter

  • JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
  • JIS M 8718:2000 Iron ore pellets -- Determination of crushing strength
  • JIS M 8718:2009 Iron ore pellets -- Determination of crushing strength
  • JIS K 6219-4:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 4: Determination of pellet size distribution
  • JIS K 6219-2:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 2: Determination of pour density
  • JIS R 6001-2:2017 Bonded abrasives -- Determination and designation of grain size distribution -- Part 2: Microgrits
  • JIS K 6219-3:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 3: Determination of individual pellet crushing strength
  • JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determining the density of particulate matter

  • GB/T 7702.4-1997 Standard test method for granular activated carbon from coal--Determination of apparent density
  • GB/T 31057.1-2014 Granular materials.The physical properties.Part 1:Determination of apparent density
  • GB/T 12030-1989 Determination of particle size of podered detergents
  • GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
  • GB/T 25266-2010 Paints.Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method
  • GB/T 9984.8-1988 Determination of particle size for industrial use--Sodium tripotyphosphate
  • GB/T 9984.8-2004 Sodium tripolyphosphate for industrial use-Determination of particle size
  • GB/T 27596-2011 Dyestuffs.Determination of particle fineness.Microscope method
  • GB/T 3780.13-1983 Carbon black(pelletized)--Determination of pour density
  • GB/T 27893-2011 Natural gas.Determination of particles content.Gravimetric method
  • GB/T 7702.3-1997 Standard test method for granular activated carbon from coal--Determination of hardness
  • GB/T 7702.3-2008 Test method for granular activated carbon from coal-Determination of hardness
  • GB/T 15432-1995 Ambient Air--Determination of total suspended particulates--Gravimetric method
  • GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
  • GB/T 14853.6-2013 Rubber compounding ingredients.Pelletized carbon black.Part 6:Determination of individual pellet crushing strength
  • GB/T 4668-1995 Textiles--Woven fabrics--Determination of number of threads per unit length
  • GB/T 14853.1-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of pour density
  • GB/T 10664-2003 Pigment printing ink-Determination of printing shade、relative strength and granule fineness

国家市场监督管理总局、中国国家标准化管理委员会, Determining the density of particulate matter

  • GB/T 31057.2-2018 Granular materials—Physical properties—Part 2: Determination of tap density
  • GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
  • GB/T 37163-2018 Hydraulic fluid power—Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle

PL-PKN, Determining the density of particulate matter

  • PN C87006-21-1991 Calcium-magnesium fertilizers Determination of grainsize
  • PN B06714-43-1987 Mineral aggregates Testings Determination of compressive strength of particles contents

SE-SIS, Determining the density of particulate matter

  • SIS SS 18 71 80-1990 Biofuels and peat — Determination of mechanical strength for pellets
  • SIS SS-ISO 9279:1992 Uranium dioxide pellets — Determination of density and total porosity — Mercury displacement method

GOSTR, Determining the density of particulate matter

  • GOST 34089-2017 Solid biofuel. Determination of length and diameter of pellets

Professional Standard - Agriculture, Determining the density of particulate matter

Standard Association of Australia (SAA), Determining the density of particulate matter

  • AS 1774.2:2001(R2013)
  • AS 1141.7:1995 Methods for sampling and testing aggregates - Apparent particle density of filler
  • AS 1774.2:2001 Refractories and refractory materials - Physical test methods - Determination of bulk density of granular materials
  • AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
  • AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate
  • AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method

未注明发布机构, Determining the density of particulate matter

  • BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
  • BS EN 543:2003(2007) Adhesives — Determination of apparent density of powder and granule adhesives
  • DIN EN 1097-6:2001 Tests for mechanical and physical properties of aggregates — Part 6: Determination of particle density and water absorption
  • JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
  • DIN EN 1097-7:1999 Tests for mechanical and physical properties of aggregates — Part 7: Determination of the particle density of filler — Pycnometer method
  • BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • BS EN ISO 7837:2001(2010) Fertilizers — Determination of bulk density (loose) of fine - grained fertilizers

Hebei Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources
  • DB13/T 2376-2016 Determination of particulate matter in exhaust gas from stationary pollution sources β-ray method

North Atlantic Treaty Organization Standards Agency, Determining the density of particulate matter

  • STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

Qinghai Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB63/T 1873-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Liaoning Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB21/T 3270-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Shandong Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB37/T 3785-2019 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
  • DB37/T 2537-2014 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources in Shandong Province
  • DB37/T 4378-2021 Portable beta-ray method for the determination of particulate matter in ambient air

Jiangxi Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB36/T 1386-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Inner Mongolia Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB15/T 2362-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Jilin Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB22/T 3426-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Group Standards of the People's Republic of China, Determining the density of particulate matter

  • T/XZFW 004-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
  • T/XZFW 006-2023 Digital processor for monitoring results of low-concentration particulate matter in exhaust gas from fixed pollution sources
  • T/XZFW 010-2023 Stationary source emission —data processor for monitoring of particulate matter at low concentration

NATO - North Atlantic Treaty Organization, Determining the density of particulate matter

  • STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +
  • AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (

Indonesia Standards, Determining the density of particulate matter

TH-TISI, Determining the density of particulate matter

  • TIS 1743-1999 Coarse aggregates for concrete.determination of particle density and water absorption.hydrostatic balance method
  • TIS 1850-1999 Rubber compounding ingredients.carbon black.determination of individual pellet crushing strength

化学工业部, Determining the density of particulate matter

  • HG 2224-1991 Determination of the granular average compressive temperature of granular heavy superphosphate

Beijing Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB11/T 1485-2017 Determination of Particulate Matter in Catering Industry Manual Weighing Method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Determining the density of particulate matter

  • GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size

Professional Standard - Forestry, Determining the density of particulate matter

Hubei Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB42/T 1904-2022 Portable β-ray method for the determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

Professional Standard - Electron, Determining the density of particulate matter

  • SJ 2253-1982 Method of measurement of granularity of cathode carbonate
  • SJ/T 10216-1991 Determination of density for magnetic oxide powders.Determination of tap density

Professional Standard - Aviation, Determining the density of particulate matter

  • HB 8581-2020 Hydraulic fluid power- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light- extinction principle

HU-MSZT, Determining the density of particulate matter

Professional Standard - Environmental Protection, Determining the density of particulate matter

  • HJ 1263-2022 Ambient air—Determination of total suspended particle —Gravimetric method

Heilongjiang Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB23/T 2482-2019 Laser Scattering Method for Determination of Exhaust Gas Particles from Stationary Pollution Sources

Taiwan Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • CNS 4682-1978 Method of Test for Bulk Density and Porosity of Granular Refractory Materials by Mercury Displacement

Gansu Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB62/T 4391-2021 Determination of Exhaust Gas Particulates from Stationary Pollution Sources β-ray Absorption Method

Professional Standard - Commodity Inspection, Determining the density of particulate matter

  • SN/T 4059-2014 Determination of magnetic metal particles in paprika condiment for export

Jiangsu Provincial Standard of the People's Republic of China, Determining the density of particulate matter

  • DB32/T 4343-2022 Portable Oscillating Balance Method for Determination of Exhaust Gas Particulates from Stationary Pollution Sources

BR-ABNT, Determining the density of particulate matter

TR-TSE, Determining the density of particulate matter

  • TS 3425-1979 PLASTICS-AQUEOUS DISPERSIONS OF HOMOPOLYMERS AND COPOLYMERS-DETERMINATION OF GROSS PARTICLE CONTENT BY SIEVE ANALYSIS

The American Road & Transportation Builders Association, Determining the density of particulate matter

  • AASHTO T 195-1967(R2007) Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
  • AASHTO T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures

AASHTO - American Association of State Highway and Transportation Officials, Determining the density of particulate matter

  • T 195-2018 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
  • T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved