ZH

RU

ES

Permeability test detection

Permeability test detection, Total:499 items.

In the international standard classification, Permeability test detection involves: Non-destructive testing, Sterilization and disinfection, Vocabularies, Construction materials, Products of the textile industry, Rubber and plastics products, Environmental testing, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Paper and board, Welding, brazing and soldering, Test conditions and procedures in general, Waxes, bituminous materials and other petroleum products, Elements of buildings, Road engineering, Protective equipment, Medical equipment, Testing of metals, Iron and steel products, Wastes, Road vehicle systems, Leather technology, Construction technology, Geology. Meteorology. Hydrology, Packaging materials and accessories, Analytical chemistry, Protection of and in buildings, Packaging and distribution of goods in general, Materials for the reinforcement of composites, Insulating materials, Powder metallurgy, Refractories, Magnetic materials, Footwear, Electrical and electronic testing, Fibre optic communications, Protection against fire, Agricultural machines, implements and equipment, Items of art and handicrafts, Structures of buildings, Paper products, Construction industry, Products of the chemical industry, Equipment for the chemical industry, Reinforced plastics, Components and accessories for telecommunications equipment, Water quality, Paint ingredients, Aerospace fluid systems and components, Internal combustion engines for road vehicles, Pipeline components and pipelines, Textile fibres.


International Organization for Standardization (ISO), Permeability test detection

  • ISO 3452-2:2000 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
  • ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
  • ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C
  • ISO 3453:1984 Non-destructive testing; Liquid penetrant inspection; Means of verification
  • ISO 3452-2:2013 Non-destructive testing.Penetrant testing.Part 2: Testing of penetrant materials
  • ISO 3452-2:2021 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
  • ISO 12706:2009 Non-destructive testing - Penetrant testing - Vocabulary
  • ISO 3452-3:2013 Non-destructive testing.Penetrant testing.Part 3: Reference test blocks
  • ISO 3452-3:1998 Essais non destructifs - Examen par ressuage - Partie 3: Pièces de référence (Deuxième édition)
  • ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C
  • ISO 3452:1984 Non-destructive testing; Penetrant inspection; General principles
  • ISO 3452-4:1998 Non-destructive testing - Penetrant testing - Part 4: Equipment
  • ISO 18695:2007 Textiles - Determination of resistance to water penetration - Impact penetration test
  • ISO 22476-3:2005 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test
  • ISO 3452-1:2008 Non-destructive testing - Penetrant testing - Part 1: General principles
  • ISO 3059:2012 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
  • ISO 17892-11:2019 Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests
  • ISO 8272:1985 Doorsets; Air permeability test
  • ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles
  • ISO 3452-1:2021 Non-destructive testing - Penetrant testing - Part 1: General principles
  • ISO 14268:2012 Leather - Physical and mechanical tests - Determination of water vapour permeability
  • ISO 14268:2002 Leather - Physical and mechanical tests - Determination of water vapour permeability
  • ISO 6613:2023 Windows and doors — Air permeability — Test method
  • ISO 6613:1980 Windows and door height windows; Air permeability test
  • ISO 14268:2023 Leather — Physical and mechanical tests — Determination of water vapour permeability
  • ISO 14268:2023 | IULTCS/IUP 15 Leather — Physical and mechanical tests — Determination of water vapour permeability
  • ISO 14268:2012 | IULTCS/IUP 15 Leather — Physical and mechanical tests — Determination of water vapour permeability
  • ISO 14268:2002 | IULTCS/IUP 15 Leather — Physical and mechanical tests — Determination of water vapour permeability
  • ISO 16532-1:2008 Paper and board - Determination of grease resistance - Part 1: Permeability test
  • ISO/TS 17892-11:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Determination of permeability by constant and falling head
  • ISO/TS 17892-11:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Determination of permeability by constant and falling head
  • ISO 17230:2006 Leather - Physical and mechanical tests - Determination of water penetration pressure

Korean Agency for Technology and Standards (KATS), Permeability test detection

British Standards Institution (BSI), Permeability test detection

  • BS EN 867-4:2001 Non-biological systems for use in sterilizers - Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration
  • BS EN ISO 3452-2:2000 Non-destructive testing - Penetrant testing - Testing of penetrant materials
  • BS EN ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Testing of penetrant materials
  • BS EN ISO 3452-2:2013 Non-destructive testing. Penetrant testing. Testing of penetrant materials
  • BS EN ISO 3452-6:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 degrees C
  • BS EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C
  • BS EN ISO 3452-5:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures higher than 50 degrees C
  • BS EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures higher than 50 degrees C
  • BS EN ISO 3452-3:1999 Non-destructive testing - Penetrant testing - Reference test blocks
  • BS EN ISO 12706:2010 Non-destructive testing. Penetrant testing. Vocabulary
  • BS EN ISO 12706:2009 Non-destructive testing - Penetrant testing - Vocabulary
  • 19/30376317 DC BS EN ISO 3452-2. Non-destructive testing. Penetrant testing. Part 2. Testing of penetrant materials
  • BS EN ISO 3452-3:2013 Non-destructive testing. Penetrant testing. Reference test blocks
  • BS EN ISO 3452-2:2021 Tracked Changes. Non-destructive testing. Penetrant testing. Testing of penetrant materials
  • BS EN 571-1:1997 Non-destructive testing - Penetrant testing - General principles
  • BS ISO 18695:2007 Textiles - Determination of resistance to water penetration - Impact penetration test
  • BS ISO 16532-1:2009 Paper and board. Determination of grease resistance. Permeability test
  • BS ISO 16532-1:2008 Paper and board - Determination of grease resistance - Permeability test
  • BS EN ISO 23277:2010 Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels
  • BS EN ISO 3059:2012 Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
  • BS EN ISO 3452-1:2021 Tracked Changes. Non-destructive testing. Penetrant testing. General principles
  • BS EN ISO 17892-11:2019 Geotechnical investigation and testing. Laboratory testing of soil - Permeability tests
  • BS EN 13087-3:2000 Protective helmets. Test methods. Resistance to penetration
  • BS EN 13087-3:2000(2002) Protective helmets. Test methods. Resistance to penetration
  • BS EN ISO 23277:2009 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels
  • BS EN ISO 22476-3:2005 Geotechnical investigation and testing - Field testing - Standard penetration test
  • BS EN ISO 22476-3+A1:2006 Geotechnical investigation and testing. Field testing. Standard penetration test
  • BS EN ISO 22476-3:2005+A1:2011 Geotechnical investigation and testing. Field testing. Standard penetration test
  • BS 4315-2:1970 Methods of test for resistance to air and water penetration - Permeable walling constructions (water penetration)
  • PD CEN/TS 17108:2017 Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice
  • BS EN 20811:1982 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test
  • BS EN ISO 14268:2012 Leather. Physical and mechanical tests. Determination of water vapour permeability
  • 19/30376314 DC BS EN ISO 3452-1. Non-destructive testing. Penetrant testing. Part 1. General principles
  • BS EN 2002-16:2019 Aerospace series. Metallic materials. Test methods - Non-destructive testing. Penetrant testing
  • BS EN 13880-3:2003 Hot applied joint sealants - Test method for the determination of penetration and recovery (resilience)
  • BS EN 15803:2010 Conservation of cultural property. Test methods. Determination of water vapour permeability ($Gdp)
  • BS EN 15803:2009 Conservation of cultural property - Test methods - Determination of water vapour permeability (p)
  • BS EN 50289-4-2:2001 Communication cables - Specifications for test methods - Environmental test methods - Water penetration
  • BS EN 539-1:2005 Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Impermeability test
  • BS EN 13274-7:2002 Respiratory protective devices - Methods of test - Determination of particle filter penetration
  • BS EN 13274-7:2008 Respiratory protective devices — Methods of test — Part 7: Determination of particle filter penetration
  • BS EN 993-4:1995 Methods of test for dense shaped refractory products. Determination of permeability to gases
  • BS EN 10246-11:2000 Non-destructive testing of steel tubes - Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections

Japanese Industrial Standards Committee (JISC), Permeability test detection

  • JIS Z 2343-2:2001 Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials
  • JIS Z 2343-3:2001 Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
  • JIS Z 2343-3:2017 Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
  • JIS Z 2343-1:2001 Non-destructive testing -- Penetrant testing -- Part 1: General principles -- Method for liquid penetrant testing and classification of the penetrant indication
  • JIS Z 2343-1:2017 Non-destructive testing -- Penetrant testing -- Part 1: General principles -- Method for liquid penetrant testing and classification of the penetrant indication
  • JIS Z 2343-2:2009 Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials
  • JIS Z 2343-2:2017 Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials
  • JIS Z 2343-6:2012 Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 degree C
  • JIS Z 2343-5:2012 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degree C
  • JIS Z 2343-4:2001 Non-destructive testing -- Penetrant testing -- Part 4: Equipment
  • JIS A 1219:2013 Method for standard penetration test
  • JIS Z 0221:1976 Method of water permeability test for packing material
  • JIS K 6549:1977 Testing method for water vapour permeability of leather
  • JIS R 2115:2022 Testing method for permeability to gases of refractory products
  • JIS A 1147:2001 Test method for time of setting of concrete mixtures by penetration resistance
  • JIS Z 0220:1960 Testing method for exudation resistance of tarpaulin paper for wrappings
  • JIS Z 0222:1959 Method of permeability test for moisture proof packing case

Association Francaise de Normalisation, Permeability test detection

  • NF A09-120-2*NF EN ISO 3452-2:2021 Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials
  • NF A09-120-2:2014 Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials
  • NF A09-120-2:2007 Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials.
  • NF A09-120-5*NF EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5 : penetrant testing at temperatures higher than 50 oC.
  • NF G07-055*NF ISO 18695:2008 Textiles - Determination of resistance to water penetration - Impact penetration test
  • NF A09-520:1989 NON DESTRUCTIVE TESTING. PENETRANT TESTING. CHECK OF PENETRANT PROPERTIES.
  • NF A09-020-6*NF EN ISO 12706:2010 Non-destructive testing - Penetrant testing - Vocabulary
  • NF A09-120-6*NF EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6 : penetrant testing at temperatures lower than 10 oC.
  • NF A09-120-3*NF EN ISO 3452-3:2014 Non-destructive testing - Penetrant testing - Part 3 : reference test blocks
  • NF ISO 16532-1:2009 Papier et carton - Détermination de l'imperméabilité aux graisses - Partie 1 : essai de perméabilité
  • NF A09-599:2001 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions.
  • NF A09-460*NF EN 1518:1998 Non-destructive testing. Leak testing. Characterization of mass spectrometer leak detectors.
  • NF P94-521-3*NF EN ISO 22476-3:2005 Geotechnical investigation and testing - Field testing - Part 3 : standard penetration test
  • NF A89-541*NF EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels
  • NF A09-599*NF EN ISO 3059:2013 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
  • NF EN ISO 23277:2015 Contrôle non destructif des assemblages soudés - Contrôle par ressuage - Niveaux d'acceptation
  • NF G52-016:1976 Determination of the permeability of leather to watervapour (static test).
  • NF A09-120-1:2013 Non-destructive testing - Penetrant testing - Part 1: general principles
  • NF A09-120-1*NF EN ISO 3452-1:2021 Non-destructive testing - Penetrant testing - Part 1 : general principles
  • NF P94-521-3/A1*NF EN ISO 22476-3/A1:2012 Geotechnical investigation and testing - Field testing - Part 3 : standard penetration test - Amendment 1
  • NF G07-057*NF EN ISO 811:2018 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test
  • NF EN ISO 811:2018 Textiles -Détermination de la résistance à la pénétration de l'eau - Essai sous pression hydrostatique
  • NF X30-424:2013 Déchets - Détermination du coefficient de perméabilité d'un terrain par essai d'infiltration à charge constante en forage
  • NF X30-442:2008 Déchets - Détermination au laboratoire du coefficient de perméabilité à saturation d'un matériau - Essais de perméabilité à l'oedomètre à charge hydraulique constante/variable
  • NF X30-441:2008 Déchets - Détermination en laboratoire du coefficient de perméabilité à saturation d'un matériau - Essais de perméabilité au perméamètre à paroi rigide à gradient hydraulique constant/variable
  • NF G52-013:1976 DETERMINATION OF THE PERMEABILITY OF LEATHER TO WATERVAPOUR (DYNAMIC TEST).
  • NF L10-023*NF EN 2002-16:2019 Aerospace series - Metallic materials - Test methods - Part 16 : non-destructive testing - Penetrant testing
  • NF EN 2002-16:2019 Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Partie 16 : essais non destructifs - Examen par ressuage
  • NF G52-013*NF EN ISO 14268:2012 Leather - Physical and mechanical tests - Determination of water vapour permeability
  • NF EN ISO 14268:2023 Cuir - Essais physiques et mécaniques - Détermination de la perméabilité à la vapeur d'eau
  • NF X30-465:2005 Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions).
  • NF P84-705:2008 Geosynthetic barriers - Determination of the swelling, flow and permeability characteristics of geosysnthetic clay liners (GCL) using an oedopermeameter - Characterisation test and performance test.
  • NF G62-003:1982 Footwear. Method of test for the dynamic wayer proofness of soling leather.
  • NF EN ISO 17892-11:2019 Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 11 : essais de perméabilité
  • NF Q03-081-1*NF ISO 16532-1:2009 Paper and board - Determination of grease resistance - Part 1 : permeability test
  • NF EN 13726:2023 Méthodes d'essai pour pansements en contact avec la plaie - Absorption, perméabilité à la vapeur d'eau, imperméabilité à l'eau et extensibilité
  • NF A09-521:1988 NON DESTRUCTIVE TESTING. PENETRANT TESTING. SENSITIVITY AND APPLICATION OF PRODUCTS.
  • NF A09-493:1990 Non destructive testing. Tightness testing. Recommended practices for testing by vacuum dye penetration by means of helium.
  • NF P94-512-11*NF EN ISO 17892-11:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 11 : permeability tests
  • NF X45-404:1996 Granular filter media. Test methods. Measurement of the permeability of a filter aid.
  • NF S72-509-3/A1*NF EN 13087-3/A1:2002 Protective helmets - Test methods - Part 3 : resistance to penetration
  • NF X30-443:2014 Déchets - Détermination en laboratoire du coefficient de perméabilité à saturation d'un matériau - Perméamètre à paroi flexible à gradient hydraulique constant

CEN - European Committee for Standardization, Permeability test detection

  • EN ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
  • EN ISO 17892-11:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests

European Committee for Standardization (CEN), Permeability test detection

  • EN ISO 3452-2:2000 Non-Destructive Testing - Penetrant Testing - Part 2: Testing of Penetrant Materials ISO 3452-2: 2000
  • EN ISO 3452-2:2021 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021)
  • EN ISO 3452-2:2013 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
  • EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)
  • EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
  • EN ISO 12706:2009 Non-destructive testing - Penetrant testing - Vocabulary (ISO 12706:2009)
  • EN ISO 22476-3:2005 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)
  • EN ISO 3452-3:1998 Non-Destructive Testing - Penetrant Testing - Part 3: Reference Test Blocks ISO 3452-3:1998
  • EN ISO 12706:2000 Non-Destructive Testing - Terminology - Terms Used in Penetrant Testing ISO 12706:2000
  • EN ISO 3452-1:2021 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2021)
  • EN ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles
  • EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
  • EN ISO 3452-3:2013 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks
  • EN 10228-2:2016 Non-destructive testing of steel forgings - Part 2: Penetrant testing
  • EN ISO 22476-3:2005/A1:2011 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1 (ISO 22476-3:2005/Amd 1:2011)
  • EN ISO 14268:2023 Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268:2023)
  • EN ISO 14268:2002 Leather - Physical and mechanical tests - Determination of water vapour permeability ISO 14268:2002
  • EN ISO 14268:2012 Leather - Physical and mechanical tests - Determination of water vapour permeability
  • EN 15803:2009 Conservation of cultural property - Test methods - Determination of water vapour permeability (δp)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Permeability test detection

  • GB/T 18851-2002 Non-destructive testing--Penetrant testing Reference Test blocks
  • GB/T 18851.2-2005 Non-destructive testing-Penetrant testing-Part 2:Testing of penetrant materials
  • GB/T 18851.2-2008 Non-destructive testing.Penetrant testing.Part 2:Testing of penetrant materials
  • GB/T 23911-2009 Non-destructive testing.Blocks for penetrant testing
  • GB/T 18851.5-2005 Non-destructive testing.Penetrant testing.Part 5:Means of verification
  • GB/T 26953-2011 Non-destructive testing of welds.Penetrant testing of welds.Acceptance levels
  • GB/T 18851.3-2008 Non-destructive testing.Penetrant testing.Part 3:Reference test blocks
  • GB/T 15226-1994 Test method of air permeability performance for building curtain walls
  • GB/T 5249-1985 Permeable sintered metal materials--Determination of bubble test pore size
  • GB/T 5249-2013 Permeable sintered metal materials.Determination of bubble test pore size
  • GB/T 13686-1992 Graduation and test methods of air permeability anf water penetration for building external doors

German Institute for Standardization, Permeability test detection

  • DIN EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C (ISO 3452-6:2008); English version of DIN EN ISO 3452-6:2009-04
  • DIN EN ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2006); English version of DIN EN ISO 3452-2:2006-11
  • DIN EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C (ISO 3452-5:2008); English version of DIN EN ISO 3452-5:2009-04
  • DIN EN ISO 3452-2:2022-02 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021); German version EN ISO 3452-2:2021
  • DIN EN ISO 23277:2015-06 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015); German version EN ISO 23277:2015
  • DIN EN ISO 22476-3:2012 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005 + Amd 1:2011); German version EN ISO 22476-3:2005 + A1:2011
  • DIN EN ISO 3452-2:2014 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013); German version EN ISO 3452-2:2013
  • DIN EN ISO 3452-3:2014-03 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013); German version EN ISO 3452-3:2013
  • DIN EN 10228-2:1998 Non-destructive testing of steel forgings - Part 2: Penetrant testing; German version EN 10228-2:1998
  • DIN 53116:2003-02 Testing of paper - Determination of grease permeability
  • DIN EN 20811:1992 Determination of resistance of textile fabrics to water penetration; hydrostatic pressure test (ISO 811:1981); german version EN 20811:1992
  • DIN EN ISO 811:2018-08 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test (ISO 811:2018); German version EN ISO 811:2018
  • DIN 19682-7:2015-08 Soil quality - Field tests - Part 7: Determination of infiltration rate by double ring infiltrometer
  • DIN EN 2002-16:2020-02 Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing; German and English version EN 2002-16:2019
  • DIN EN ISO 17892-11:2021-03 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019); German version EN ISO 17892-11:2019
  • DIN EN 14786:2007 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test; English version of DIN EN 14786:2007-03
  • DIN EN ISO 3452-3:2014 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013); German version EN ISO 3452-3:2013
  • DIN ISO 4003:1990 Permeable sintered metal materials; determination of bubble test pore size; identical with ISO 4003:1977
  • DIN EN ISO 3059:2013 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012); German version EN ISO 3059:2012
  • DIN EN 13087-3:2000 Protective helmets - Test methods - Part 3: Resistance to penetration; German version EN 13087-3:2000

ZA-SANS, Permeability test detection

  • SANS 3452-2:2009 Non-destructive testing - Penetrant testing Part 2: Testing of penetrant materials
  • SANS 3452-3:1998 Non-destructive testing - Penetrant testing Part 3: Reference test blocks
  • SANS 3452-1:2009 Non-destructive testing - Penetrant testing Part 1: General principles
  • SANS 5101:2004 Water resistance of textile fabrics: drop penetration test

ES-UNE, Permeability test detection

  • UNE-EN ISO 3452-2:2022 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021)
  • UNE-EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
  • UNE-EN ISO 17892-11:2020 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019)
  • UNE-EN 4703:2022 Aerospace series - Test specification for verification of the permeability of electrical insulation (Endorsed by Asociación Española de Normalización in February of 2023.)
  • UNE-EN ISO 811:2019 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test (ISO 811:2018)

BR-ABNT, Permeability test detection

GOSTR, Permeability test detection

SE-SIS, Permeability test detection

RO-ASRO, Permeability test detection

  • STAS 1913/6-1976 Foundation ground LABORATORY PERMEABILITY TEST
  • STAS SR ISO 9583:1995 Implants for surgery. Non-destructive testing. Liquid penetrant inspection of metailic surgical implants
  • STAS 9569-1982 WOVEN FABRICS Determination of the resistance to water penetration (Hydrostatic pressure test)

AT-ON, Permeability test detection

  • ONORM L 1066-1988 Physical investigations of soils; determination of the injiltration rate with a double ring infiltrometer
  • ONORM L 1065-1988 Physical investigations ofsoil; determination ofhydraulic conductivity ofsaturated soil samples

Professional Standard - Machinery, Permeability test detection

  • JB/T 6064-2006 Non-destructive testing Blocks for penetrant testing
  • JB/T 9213-1999 Non destructive testing.Penetrant testing.A type comparator block
  • JB/T 6064-2015 Non-destructive testing.General specification for penetrant blocks

Danish Standards Foundation, Permeability test detection

  • DS/ISO 3452:1987 Non-destructive testing. Penetrant inspection. General principles
  • DS/ISO 3453:1987 Non-destructive testing. Liquid penetrant inspection. Means of verification
  • DS/EN ISO 3452-3:1999 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks
  • DS/ISO 811:1982 Textile fabrics. Determination of resistance to water penetration. Hydrostatic pressure test
  • DS/EN ISO 23277:2010 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels
  • DS/EN 20811:1993 Textiles. Determination of resistance to water penetration. Hydrostatic pressure test
  • DS/ISO 4003:1994 Permeable sintered metal materials - Determination of bubble test pore size

Defense Logistics Agency, Permeability test detection

(U.S.) Ford Automotive Standards, Permeability test detection

CZ-CSN, Permeability test detection

Professional Standard - Civil Aviation, Permeability test detection

RU-GOST R, Permeability test detection

GM North America, Permeability test detection

American Society for Testing and Materials (ASTM), Permeability test detection

  • ASTM D5084-03 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM E2945-14 Standard Test Method for Film Permeability Determination Using Static Permeability Cells
  • ASTM E1418-98 Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process
  • ASTM E1418-16 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
  • ASTM E165-09 Standard Practice for Liquid Penetrant Examination for General Industry
  • ASTM E165-02 Standard Test Method for Liquid Penetrant Examination
  • ASTM E165-95 Standard Test Method for Liquid Penetrant Examination
  • ASTM E1418-04 Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process
  • ASTM E2945-14(2021) Standard Test Method for Film Permeability Determination Using Static Permeability Cells
  • ASTM D3385-09 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
  • ASTM F1407-11 Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method
  • ASTM D5084-00e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM D5084-00 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM F1407-99a Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method
  • ASTM C1781/C1781M-13 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM F1927-20 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
  • ASTM F1929-12 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
  • ASTM D4194-03 Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
  • ASTM D4194-03(2008) Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
  • ASTM D3385-94 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
  • ASTM F1927-07 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
  • ASTM D243-97 Standard Test Method for Residue of Specified Penetration
  • ASTM D243-02 Standard Test Method for Residue of Specified Penetration
  • ASTM D243-08 Standard Test Method for Residue of Specified Penetration
  • ASTM D5/D5M-13 Standard Test Method for Penetration of Bituminous Materials
  • ASTM F1407-12 Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeationmdash;Permeation Cup Method
  • ASTM F1927-98(2004) Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
  • ASTM F1927-98e1 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
  • ASTM F1407-99a(2006) Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method
  • ASTM F1407-12(2017) Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method
  • ASTM E1220-99 Standard Test Method for Visible Penetrant Examination Using the Solvent-Removable Process
  • ASTM E1220-16 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
  • ASTM D5-65 Standard Method Of Test For Penetration Of Bituminous Materials
  • ASTM D5-73(1978) Standard Test Method for Penetration Of Bituminous Materials
  • ASTM D5-06e1 Standard Test Method for Penetration of Bituminous Materials
  • ASTM D5-06 Standard Test Method for Penetration of Bituminous Materials
  • ASTM C577-07 Standard Test Method for Permeability of Refractories
  • ASTM E1417-05e1 Standard Practice for Liquid Penetrant Testing
  • ASTM E1417-05 Standard Practice for Liquid Penetrant Testing
  • ASTM D5-97 Standard Test Method for Penetration of Bituminous Materials
  • ASTM C577-99 Standard Test Method for Permeability of Refractories
  • ASTM D5/D5M-19a Standard Test Method for Penetration of Bituminous Materials
  • ASTM D5/D5M-19 Standard Test Method for Penetration of Bituminous Materials
  • ASTM A342/A342M-99 Standard Test Methods for Permeability of Feebly Magnetic Materials
  • ASTM C577-07e1 Standard Test Method for Permeability of Refractories
  • ASTM D5-05 Standard Test Method for Penetration of Bituminous Materials
  • ASTM D5-05a Standard Test Method for Penetration of Bituminous Materials
  • ASTM C577-07e2 Standard Test Method for Permeability of Refractories
  • ASTM E1417/E1417M-11e1 Standard Practice for Liquid Penetrant Testing
  • ASTM D5/D5M-20 Standard Test Method for Penetration of Bituminous Materials
  • ASTM C577-19 Standard Test Method for Permeability of Refractories
  • ASTM A342/A342M-21 Standard Test Methods for Permeability of Weakly Magnetic Materials
  • ASTM D243/D243M-14 Standard Test Method for Residue of Specified Penetration
  • ASTM C577-07(2014) Standard Test Method for Permeability of Refractories
  • ASTM E1417/E1417M-13 Standard Practice for Liquid Penetrant Testing
  • ASTM F1194-99 Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
  • ASTM F1194-99(2005) Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
  • ASTM E814-06 Standard Test Method for Fire Tests of Through-Penetration Fire Stops
  • ASTM D7100-04 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions that may Alter Hydraulic Conductivity
  • ASTM D5093-90(1997) Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
  • ASTM D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
  • ASTM D5093-15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
  • ASTM F1671-03 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
  • ASTM E96-00e1 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM E96-00 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM E514-05 Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514-05a Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514-05b Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E514-05c Standard Test Method for Water Penetration and Leakage Through Masonry
  • ASTM E96/E96M-05 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM D4525-90(1995)e1 Standard Test Method for Permeability of Rocks by Flowing Air
  • ASTM D4525-90(2001) Standard Test Method for Permeability of Rocks by Flowing Air
  • ASTM D4525-13 Standard Test Method for Permeability of Rocks by Flowing Air
  • ASTM D4525-13e1 Standard Test Method for Permeability of Rocks by Flowing Air
  • ASTM D6807-17 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 μS/cm
  • ASTM D780-95(1999) Standard Test Method for Printing Ink Permeation of Paper (Castor Oil Test)
  • ASTM D5093-02 Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
  • ASTM D5093-02(2008) Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
  • ASTM D8132/D8132M-17 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
  • ASTM E1209-99 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Water-Washable Process
  • ASTM E1219-99 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process
  • ASTM E1210-99 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Hydrophilic Post-Emulsification Process
  • ASTM E1210-21 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
  • ASTM E1219-16 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
  • ASTM C1781/C1781M-18e1 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM C1781/C1781M-18 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM D780-95(2003) Standard Test Method for Printing Ink Permeation of Paper (Castor Oil Test)
  • ASTM C803-79 Standard Test Method for Penetration Resistance Of Hardened Concrete
  • ASTM C803/C803M-03 Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM C803/C803M-03(2010) Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM C803/C803M-97e1 Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM D4194-95 Standard Test Methods for Operating Characteristics of Reverse Osmosis Devices
  • ASTM D5052-00 Standard Test Method for Permeability of Leather to Water Vapor
  • ASTM E96/E96M-13 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM E96/E96M-14 Standard Test Methods for Water Vapor Transmission of Materials
  • ASTM C803/C803M-18 Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM D5052-18(2023) Standard Test Method for Permeability of Leather to Water Vapor
  • ASTM D5052-18 Standard Test Method for Permeability of Leather to Water Vapor
  • ASTM C803/C803M-17 Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM D209-81(2003) Standard Specification for Lampblack Pigment
  • ASTM D209-81(1996)e1 Standard Specification for Lampblack Pigment
  • ASTM D2099-14(2023) Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
  • ASTM PS129-01 Standard Provisional Test Method for Measurement of Permeability of Bituminous Paving Mixtures Using a Flexible Wall Permeameter (Withdrawn 2003)
  • ASTM D3385-18 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
  • ASTM F303-78(1996) Standard Practices for Sampling Aerospace Fluids from Components
  • ASTM F3039-13 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
  • ASTM F3039-15 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
  • ASTM F303-08(2016) Standard Practices for Sampling for Particles in Aerospace Fluids and Components
  • ASTM D5084-10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM D4491-99a Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D4491-99a(2004)e1 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM D4491-99a(2004) Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • ASTM C1601-06 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
  • ASTM C1601-14a Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
  • ASTM E1418-05 Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process

KR-KS, Permeability test detection

  • KS K ISO 18695-2019 Textiles — Determination of resistance to water penetration — Impact penetration test
  • KS B ISO 23277-2023 Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels
  • KS B ISO 3452-3-2022 Non-destructive testing — Penetrant testing —Part 3: Reference test blocks
  • KS B ISO 3452-3-2016 Non-destructive testing-Penetrant testing-Part 3:Reference test blocks
  • KS K ISO 811-2021 Textiles — Determination of resistance to water penetration —Hydrostatic pressure test
  • KS K ISO 811-2015 Textile fabrics — Determination of resistance to water penetration — Hydrostatic pressure test
  • KS M ISO 16532-1-2020 Paper and board — Determination of grease resistance —Part 1: Permeability test
  • KS B ISO 10893-4-2018 Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
  • KS B ISO 3452-1-2017 Non-destructive testing — Penetrant testing — Part 1: General principles

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Permeability test detection

  • GB/T 33732-2017 Textiles—Determination of resistance to water penetration—Impact penetration test
  • GB/T 34243-2017 Test method for pervaporation dehydration membranes

SAE - SAE International, Permeability test detection

  • SAE AS3071A-1977 Acceptance Criteria-Magnetic Particle@ Fluorescent Penetrant@ and Contrast Dye Penetrant Inspection
  • SAE AS3071C-2018 Acceptance Criteria - Magnetic Particle@ Fluorescent Penetrant@ and Contrast Dye Penetrant Inspection
  • SAE J2663-2019 Test Procedure to Measure Permeation of Elastomeric Hose or Tube by Weight Loss

PT-IPQ, Permeability test detection

  • NP EN 571-1-2001 Non destructive testing-Penetrant testing Part 1:General principles
  • NP EN 10228-2-2000 Non-destructive testing of steel forgings Part 2:Penetrant testing
  • NP EN 1518-2000 Non-destructive testing Leak testing Characterization of mass spectrometer leak detectors

VN-TCVN, Permeability test detection

Society of Automotive Engineers (SAE), Permeability test detection

  • SAE AS5447-2018 Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination
  • SAE AS3071B-2012 Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection
  • SAE AS3071A-1995 ACCEPTANCE CRITERIA - MAGNETIC PARTICLE, FLUORESCENT PENETRANT, AND CONTRAST DYE PENETRANT INSPECTION
  • SAE AS3071-1971 ACCEPTANCE CRITERIA - MAGNETIC PARTICLE, FLUORESCENT PENETRANT, AND CONTRAST DYE PENETRANT INSPECTION
  • SAE J2663-2010 Test Procedure to Measure Permeation of Elastomeric Hose or Tube by Weight Loss

National Metrological Technical Specifications of the People's Republic of China, Permeability test detection

Military Standard of the People's Republic of China-General Armament Department, Permeability test detection

  • GJB 593.4-1988 Penetrant Inspection Specification for Nondestructive Testing Quality Control

未注明发布机构, Permeability test detection

Standard Association of Australia (SAA), Permeability test detection

工业和信息化部/国家能源局, Permeability test detection

  • JB/T 12727.5-2016 Non-destructive testing instrument specimens Part 5: Penetrant testing specimens

Lithuanian Standards Office , Permeability test detection

  • LST EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
  • LST EN 20811-1997 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test
  • LST EN ISO 3452-3+AC:2001 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998)
  • LST EN ISO 23277:2010 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006)
  • LST EN 15803-2010 Conservation of cultural property - Test methods - Determination of water vapour permeability (?p)
  • LST EN 24003-2002 Permeable sintered metal materials - Determination of bubble test pore size (ISO 4003:1977)

FI-SFS, Permeability test detection

PK-PSQCA, Permeability test detection

  • PS 144-1961 DETERMINATION OF RESISTANCE OF FABRICS TO PENETRATION BY WATER (HYDROSTATIC HEAD TEST)

IN-BIS, Permeability test detection

ES-AENOR, Permeability test detection

The American Road & Transportation Builders Association, Permeability test detection

  • AASHTO T 49-2007 Standard Method of Test for Penetration of Bituminous Materials

Professional Standard - Petroleum, Permeability test detection

  • SY 0064-2000 Water permeability test method for pipeline anticorrosion
  • SY/T 0064-2000 Test method for water permeability of pipeline anti-corrosion coating

Professional Standard - Ocean, Permeability test detection

  • HY/T 212-2016 Test method for surface hydrophilicity of reverse osmosis membrane

GM Daewoo, Permeability test detection

  • GMKOREA EDS-T-7409-2011 Permeability Test for Hose and Tubing
  • GMKOREA EDS-T-7655-2012 Test Method for Determining Water Vapour Permeability of Upholstery Trim Materials ??? ????? ??? ???? Version 3; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14140 [Re

API - American Petroleum Institute, Permeability test detection

IT-UNI, Permeability test detection

TR-TSE, Permeability test detection

  • TS 257-1978 METHOD OF TEST FOR RESISTANCE OF FABRICS TO PENETRATION BY WATER — HYDROSTAT1C HEAD TEST
  • TS 118-1964 STANDARD METHODS OF TEST FOR PENETRATION OF BITUMINOUS MATERIALS
  • TS 1079-1972 METHOD OP TEST FOR RESIDUE OF SPECTFIED PENETRATION FOR BITUMINOUS MATERIALS

CL-INN, Permeability test detection

GB-REG, Permeability test detection

Indonesia Standards, Permeability test detection

  • SNI ISO 811:2013 Textiles Fabrics - Determination of resistance water penetration - Hydrostatic pressure test
  • SNI ASTM C803:2012 Metode uji ketahanan beton keras terhadap penetrasi
  • SNI 04-3867-1995 Method for determination of permeability strength of insulating oils
  • SNI 03-3968-1995 Measurements method for water permeability on unsaturated zones earth by Auger holes

Professional Standard - Aviation, Permeability test detection

  • HB 5316-1993 Test method for permeability of anaerobic adhesives used in aviation

工业和信息化部, Permeability test detection

  • YB/T 5290-2017 Test method for molten iron permeability of blast furnace carbon blocks

能源部, Permeability test detection

  • SY 0064-1992 Test method for water permeability of pipeline anti-corrosion layer

YU-JUS, Permeability test detection

  • JUS C.A7.081-1992 Non-destructive testing. Penetrant materials. Characteristics and quality control
  • JUS C.A2.031-1978 Permeable sintered metal materiah - determination ofbubbk test pore si?e

Professional Standard - Commodity Inspection, Permeability test detection

  • SN/T 0400.13-2014 Rules for inspection of canned food for import and export.Part 13: Heat penetration testing

NO-SN, Permeability test detection

  • NS 3548-1987 Watertight flexible sheets - Tests for penetration by an increasing force

AENOR, Permeability test detection

  • UNE-EN ISO 3452-3:2014 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013)
  • UNE-EN 15803:2010 Conservation of cultural property - Test methods - Determination of water vapour permeability (dp)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Permeability test detection

  • PREN 2002-16-1999 Aerospace Series Metallic Materials Test Methods Non-Destructive Testing Part 16: Penetrant Testing (Edition P1)
  • PREN 2002-16-2000 Aerospace Series Metallic Materials Test Methods Part 16: Non-Destructive Testing Penetrant Testing (Edition P 1)

PL-PKN, Permeability test detection

  • PN M70052-1974 Non-destructive testing Penetrant flaw detection Terms and definitions
  • PN B04492-1955 Building soils -- Testing of physical properties -- Determination of water permeability index

TH-TISI, Permeability test detection

  • TIS 1201-1993 Standard test method for penetration of bituminous materials
  • TIS 121.23-2009 Standard test methods of textiles.part 23: determination for resistance to water penetration-hydrostatic pressure test

Canadian General Standards Board (CGSB), Permeability test detection

Taiwan Provincial Standard of the People's Republic of China, Permeability test detection

  • CNS 12087-1987 Method of Test for Fiber Optic Devices (FOPT-55 Fluid Penetration Test for Filled Fiber Optic Cable)

Professional Standard - Textile, Permeability test detection

  • FZ/T 01038-1994 Test method for water resistance of textiles and rain permeability
  • FZ/T 01124-2014 Textiles.Test method for resistance of fabric to penetration by acids or alkalis solution

HU-MSZT, Permeability test detection

BELST, Permeability test detection

  • STB 1172-99 Non-destructive testing. Penetrating testing (capillary). General requirements

Group Standards of the People's Republic of China, Permeability test detection

  • T/CECS 10272-2023 In situ test method for surface concrete permeability
  • T/ZHCA 007-2019 Method of eye irritation test in vitro for hair dye cosmetic products-Bovine cornel opacity and permeability test

American Society of Mechanical Engineers (ASME), Permeability test detection

国家市场监督管理总局、中国国家标准化管理委员会, Permeability test detection

  • GB/T 40938-2021 Leather—Physical and mechanical tests—Determination of water penetration pressure

Guangdong Provincial Standard of the People's Republic of China, Permeability test detection

NZ-SNZ, Permeability test detection

  • NZS 4402.6.5.1:1988 Methods of Testing Soils for Civil Engineering Purposes Part 6.5: Soil Strength Tests - Determination of the Penetration Resistance of Soil Test 6.5.1: Standard Penetration Test (SPT)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved