ZH
RU
ES

Internal bond strength test method

Internal bond strength test method, Total:500 items.

In the international standard classification, Internal bond strength test method involves: Paper and board, Mechanical testing, Footwear, Ceramics, Wood-based panels, Testing of metals, Surface treatment and coating, Dentistry, Electrical wires and cables, Shipbuilding and marine structures in general, Electrical accessories, Rubber, Adhesives, Construction materials, Products of the textile industry, Elements of buildings, Structures of buildings, Non-destructive testing, Rubber and plastics products, Test conditions and procedures in general, Passenger and cabin equipment, Road engineering, Sacks. Bags, Particle size analysis. Sieving, Soil quality. Pedology, Insulating materials, Bearings, Reinforced plastics, Medical equipment, Plastics, Protection of and in buildings, Earthworks. Excavations. Foundation construction. Underground works, Road vehicles in general, Earth-moving machinery, Waxes, bituminous materials and other petroleum products, Road vehicle systems, Pulps, Packaging and distribution of goods in general, Protective equipment, Vacuum technology, Glass, Bottles. Pots. Jars, Leather technology, Metalliferous minerals, Products of the chemical industry, Analytical chemistry, Powder metallurgy, Printed circuits and boards, Materials for aerospace construction, Installations in buildings, Optoelectronics. Laser equipment, Non-metalliferous minerals, Refractories, Textile machinery, Aircraft and space vehicles in general, Continuous handling equipment, Pipeline components and pipelines, Electronic tubes, Furniture, Construction industry, Welding, brazing and soldering, Inks. Printing inks, Packaging materials and accessories.

Korean Agency for Technology and Standards (KATS), Internal bond strength test method

KS T 1329-2012 Testing method for inter bond strength of paper and paperboard as measured by z-directional tensile test
KS F 2902-2008 Test methods for bond strength of sprayed fire resistive material applied to structural members
KS F 2218-2009 Testing methods for bonding strength of wall boards adhesives
KS F 2217-2009 Testing methods for bonding strength of ceiling board adhesives
KS F 2732-2018 Standard test method for pull-out strength to conclude compressive strength of concrete
KS F 2732-2023 Standard test method for pull-out strength to conclude compressive strength of concrete
KS K 0741-2021 Standard test method for determining the bond strength of geocomposites
KS M 3723-2003(2013) Testing methods for flexural strength of adhesives
KS M 3723-1987 Testing methods for flexural strength of adhesives
KS F 2217-2020 Testing methods for bonding strength of ceiling board adhesives
KS F 2218-2020 Testing methods for bonding strength of wall boards adhesives
KS F 2218-1985 Testing methods for bonding strength of wall boards adhesives
KS F 2217-1985 Testing methods for bonding strength of ceiling board adhesives
KS T 1308-2015 Testing method of sew-up strength for 1arge-sized paper bag
KS L 1206-1997(2017) Testing method for bond strength of ceramic tile to portland cement
KS M ISO 9653:2007 Adhesives－Test method for shear impact strength of adhesive bonds
KS F 2351-2005 Testing method for the compressive strength of asphalt mixtures
KS A 1016-1995 Testing method of sew-up strength for large-sized paper bag
KS M ISO 9653-2007(2017) Adhesives－Test method for shear impact strength of adhesive bonds
KS K 0742-2021 Standard test method for individual geogrid junction strength
KS F 2903-2008 Test methods for air erosion of sprayed fire resistive material applied to structural members
KS R 1146-2002(2007) Roof crush resistance test method
KS M 3718-2002(2012) General rules for testing methods of bonding strength of adhesives
KS L 5506-2006 Testing method for modulus of rupture of unfired clays
KS L 5506-1981 Testing method for modulus of rupture of unfired clays
KS F 2902-2008(2018) Test methods for bond strength of sprayed fire resistive material applied to structural members
KS F 2382-2008 Testing method for indirect tension test of bituminous mixtures
KS F 2382-2013 Standard test method for indirect tension of asphalt mixtures
KS R 1070-2003 SHEAR STRENGTH TEST PROCEDURE FOR BRAKE SHOE ASSEMBLY AND PAD
KS M ISO 20867:2012 Footwear－Test methods for insoles－Heel pin holding strength
KS K 0741-2015 Standard test method for determining the bond strength(ply adhesion) of geocomposites
KS K 0741-2011 Test method for adhesion and bonding strength of geocomposites
KS T 1308-2000 Testing method of sew-up strength for 1arge-sized paper bag
KS T 1312-2016 Testing method for adhesive strength of gummed tape
KS M 3718-2002 General rules for testing methods of bonding strength of adhesives
KS M 3718-1987 General rules for testing methods of bonding strength of adhesives
KS M 3723-2003 Testing methods for flexural strength of adhesives
KS M 6402-2018 Testing methods of wet gel strength for compounded latex
KS M 1424-2009 Testing method for compressive properties of media for water treatment
KS L ISO 679:2006 Methods of testing cements－Determination of strength
KS M 7050-2020 Testing method for surface strength of paper by wax
KS M 7050-1969 Testing method for surface strength of paper by wax
KS M 3722-2008(2013) Testing methods for tensile strength of adhesives
KS T 1308-2021 Testing method of sew-up strength for large-sized paper bag
KS T 1312-2022 Testing method for adhesive strength of gummed tape
KS F 2731-2008(2018) Testing method for velocity of ultrasonic pulses to conclude compressive strength of concrete
KS F 2730-2008(2018) Testing method for rebound number to conclude compressive strength of concrete
KS K 0536-2014 Test method for tearing strength of cloth: Tongue method
KS K 0536-1986 Test method for tearing strength of cloth: Tongue method
KS F 2405-2010 Standard test method for compressive strength of concrete
KS F 2408-2000 Method of test for flexural strength of concrete
KS L ISO 679-2006(2016) Methods of testing cements－Determination of strength
KS L ISO 679-2006(2021) Methods of testing cements－Determination of strength
KS F 2405-1997 Standard test method for compressive strength of concrete
KS F 2405-2001 Standard test method for compressive strength of concrete
KS F 2405-1982 Standard test method for compressive strength of concrete
KS K 0745-2002 Test method for seam strength of sewn geotextiles
KS M ISO 17697:2019 Footwear — Test methods for uppers, lining and insocks — Seam strength
KS M ISO 17696-2005(2020) Footwear ― Test methods for uppers, linings and insocks ― tear strength
KS K 0537-2019 Test method for tearing strength of cloth: Trapezoid method
KS L 1206-1997(2022) Testing method for bond strength of ceramic tile to portland cement
KS L 1203-2002(2022) Testing method for compressive(crushing)strength of fired whiteware materials
KS F 2413-2000 Method of test for compressive strength of concrete using portions of beams broken in flexure

国家市场监督管理总局、中国国家标准化管理委员会, Internal bond strength test method

GB/T 39163-2020 Test methods of the bonding strength for target-backing plate assemblies
GB/T 39685-2020 Test method for determining bonding strength of ceramic coatings
GB/T 3903.25-2021 Footwear—Test methods for whole shoe—Heel attachment
GB/T 38898-2020 Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave
GB/T 3903.43-2019 Footwear—Test methods for uppers，lining and insocks—Seam strength
GB/T 1457-2022 Test method for climbing drum peel strength of sandwich constructions
GB/T 38035-2019 Footwear—Test method for slide fasteners—Attachment strength of end stops
GB/T 39487-2020 Test method of tube shear strength for structural foaming adhesives
GB/T 9966.17-2021 Test methods for natural stone—Part 17: Determination of resistance to salt crystallization

Taiwan Provincial Standard of the People's Republic of China, Internal bond strength test method

CNS 13144-1993 Method of Test for Internal Bonding Strength of Paper and Paperboard ( Using Tensile Strength Tester )
CNS 13143-1993 Method of Test for Internal Bonding Strength Paperboard ( Using Z- direction Tensile / Compression Tester)

Standard Association of Australia （SAA）, Internal bond strength test method

AS/NZS 4266.6(Int):2001 Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel (Internal bond strength)
AS/NZS 4266.6:2004 Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel (internal bond strength)
AS/NZS 1462.21:1997 Methods of test for plastics pipes and fittings - Method for determination of bond strength
AS/NZS 4266.28:2004 Reconstituted wood-based panels - Methods of test - Bond strength of PVC films
AS/NZS 1301.458:2020 Methods of test for pulp and paper, Method 458: In-plane glue bond strength of wetted corrugated fibreboard
AS 4143.2:1993 Methods of test for fibre ropes - Knotability and knot breaking force
AS 1289.6.6.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the one-dimensional consolidation properties of a soil - Standard method
AS 1289.6.9.1:2000(R2013)
AS 1289.6.2.1:2001(R2013)
AS 1289.6.2.1:2001 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the shear strength of a soil
AS 1289.6.6.1:2020 Methods of testing soils for engineering purposes, Method 6.6.1: Soil strength and consolidation tests — Determination of the one-dimensional consolidation properties of a soil — Standard method
AS 4133.4.2.1:2022 Methods of testing rocks for engineering purposes, Method 4.2.1: Rock strength tests — Determination of uniaxial compressive strength — Rock strength greater than 50 MPa
AS 1289.6.2.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of shear strength of a soil - Direct shear test using a shear box
AS 1289.6.9.1:2000 Methods of testing soils for engineering purposes - Soil strength and consolidation test Determination of stiffness of soil
AS 1289.6.2.2:2020 Methods of testing soils for engineering purposes, Method 6.2.2: Soil strength and consolidation tests — Determination of shear strength of a soil — Direct shear test using a shear box
AS/NZS 2512.5.1:2008 Methods of testing protective helmets - Determination of strength of retention system - Static strength
AS/NZS 2098.3:2006 Methods of test for veneer and plywood - Bond quality and strength of scarf joints in plywood
AS/NZS 1462.21:1997 Methods of test for plastics pipes and fittings - Method for determination of bond strength
AS 1733:1976 Methods for the determination of grain size in metals
AS 1334.7:1982 Methods of testing conveyor and elevator belting - Determination of ply adhesion of conveyor belting

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Internal bond strength test method

GB/T 11413-1989 Test method for bond strength of leather shoe heels
GB/T 10430-1989 Standard test method for binding strength of sintered metal friction elements
GB/T 3903.25-2008 Footwear.Test methods for whole shoe.Heel attachment
GB/T 26203-2023 Determination of internal bond strength of paper and paperboard (Scott type)
GB/T 26203-2010 Paper and board.Determination of internal bond strength(Scott type)
GB/T 36509-2018 Requirements and testing methods of structure strength for parag lider
GB/T 3903.43-2008 Footwear.Test methods for uppers,lining and insocks.Seam strength
GB/T 12948-1991 Plain bearings--Metallic multilayer plain bearings--Destructive testing of bond for bearing metals
GB/T 14725-1993 Structural testing of lower limb prostheses
GB/T 1452-2005 Test method for flatwise tension strength of sandwich constructions
GB/T 9141-1988 Hydraulic excavators--Testing method of structure strength
GB/T 3903.8-2022 Footwear—Test methods for insoles—Delamination resistance
GB/T 3903.8-2005 Footwear-Test method for insoles Delamination resistance
GB/T 1457-2005 Test method for climbing drum peel strength of sandwich constructions
GB/T 28786-2012 Vacuum technology.Methods of bouding strength measurement for vacuum coating film.Measuring adhesion by tape test
GB/T 15615-1995 Test method for measuring flexture strength of silicon slices
GB/T 43091-2023 Powder compressive strength test method
GB/T 1452-1987 Test method for flatwise tension strength of nonmetal sandwich constructions
GB 17578-2013 Requirements and test methods of strength for the superstructure of bus
GB/T 31333-2014 Dipped cords.Test methods adhesion strength
GB/T 3688-1998 V-belt--Cord adhesion test method
GB/T 11028-1999 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
GB/T 20451-2006 Test method for ball-pan hardness of activated carbon
GB/T 6759-2013 Conveyor belts.Adhesion between constitutive elements.Test methods
GB/T 13096.3-1991 Test method for inplane shear strength of pultruded glass fiber reinforced plastic rods
GB/T 3789.17-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of electrical intensity
GB/T 6760-1986 Flat belts--Determination of ply adhesion
GB/T 3687-1989 V-belts--Determination of ply adhesion

未注明发布机构, Internal bond strength test method

BS ISO 16260:2016(2018) Paper and board — Determination of internal bond strength
DIN EN 594:1996 Timber structures, Test methods — Racking strength and stiffness of timber frame wall panels
DIN EN 302-1:2004 Adhesives for load-bearing timber structures – Test methods – Part 1: Determination of bond strength in longitudinal tensile shear

Professional Standard - Aviation, Internal bond strength test method

HB 5476-1991 Test method for bonding strength of thermal spray coatings
HB 7751-2004 Testing method for the bonding strength for the coating made by detonation-gun spraying
HB 7070-1994 Test method for extrusion strength of fiber reinforced plastic laminates

Professional Standard - Aerospace, Internal bond strength test method

QJ 479-1990 Test method for bonding strength of metal coatings
QJ 1844-1990 Magnetic test method of soft magnetic alloy with high saturation magnetic induction

American National Standards Institute （ANSI), Internal bond strength test method

ANSI/ASTM E1450:1992 Test Method for Tension Testing of Structural Alloys in Liquid Helium
PD ISO/TS 4640:2023 Dentistry. Test methods for tensile bond strength to tooth structure (British Standard)
ANSI/ASTM D4882:2005 Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted Coil Test
ANSI/ASTM D2519:2007 Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

Professional Standard - Light Industry, Internal bond strength test method

QB/T 3821-1999 Adhesion testing method of the metal deposits for the light industrial products
QB/T 4872-2015 Test method of artificial leather and synthetic leather.Test method of seam strength

International Organization for Standardization (ISO), Internal bond strength test method

ISO/TS 4640:2023 Dentistry — Test methods for tensile bond strength to tooth structure
ISO 12579:2007 Timber structures - Glued laminated timber - Method of test for shear strength of glue lines
ISO 20867:2001 Footwear - Test methods for insoles - Heel pin holding strength
ISO 20867:2018 Footwear - Test methods for insoles - Heel pin holding strength
ISO/TS 4640 Dentistry — Test methods for tensile bond strength to tooth structure
ISO 13910:2014 Timber structures - Strength graded timber - Test methods for structural properties
ISO 679:2009 Cement - Test methods - Determination of strength
ISO 17754:2014 Timber structures - Test methods - Torsional resistance of driving in screws
ISO 679:1989 Methods of testing cements; determination of strength

PL-PKN, Internal bond strength test method

PN E04410-25-1986 Electroinsulating varnishes Test methods Bond strength
PN C45301-08-1993 Caprolactam. Method of test. Determination of crystalizing point
PN P50141-1966 Tes?ing methods for products o? paper industry De?ermination of gluing strength
PN E04160 ArkusZ20-1973 Elec?ric cables Me?hods ot ?es?ing Determination ot tear strenght
PN E04410-20-1986 Electroinsulating varnishes Test methods Testing of electric strength

RU-GOST R, Internal bond strength test method

GOST 14340.5-1978 Enamelled round wires. Method of bonding strength test
GOST 29007-1991 Rubber. Method for defermination of adhesion elements in the chamber of pneumatic tyres
GOST 14863-1969 Rubber. Method for determination of rubber to cord adhesion
GOST 33120-2014 Glued timber structures. Methods for determining strength of glue joints
GOST 24992-1981 Masonry structures. Method of estimating bonding strength in masonry
GOST R 57339-2016 Masonry. Method for determination of bond strength
GOST R 56783-2015 Polymer composites. Method for determination of flatwise tensile strength of sandwich constructions
GOST R 57264-2016 Fittings for horizontal joints of masonry. Method for adhesive strength determining
GOST 34349-2017 Glued timber structures. Methods for determining of glue joints long-term strength
GOST R 57867-2017 Polymer composites. Test methods for determination of pull-through resistance
GOST 33081-2014 Wooden glued bearing structures. Strength classes of structures elements and methods for its determination
GOST 12.4.106-1981 Safety standards system. Safety leather shoes. Method for the determination of attachment strength of external protective toes
GOST 28832-1990 Materials for interlinings with thermoplastic coating. Method for determination of bonding strength
GOST 17317-1988 Artifical leather. Method for determination of interlayer bonding strength
GOST R 56786-2015 Polymer composites. Method for determination of shear strength in the plane of the reinforcement
GOST 14760-1969 Adhesives. Method of determination of tensile strength
GOST R 57067-2016 Polymer composites system for external reinforcement. Test method for determining interlayer shear strength
GOST 27034-1986 Sintered hard metals. Method of compression and yield strength determination
GOST 11262-1980 Plastics. Tensile strength test method
GOST 17302-1971 Plastics. Method of test for shear strength
GOST 33080-2014 Timber structures. Strength classes of structural sawn timber and methods of its determination
GOST R 56809-2015 Polymer composites. Method for determination of compressive strength parallel to the plane of sandwich constructions
GOST 24157-1980 Plastic pipes. Method of determination of the resistance to constant internal pressure
GOST 19194-1973 Furniture. Method for determination of detachable legs fixing strength
GOST 25884-1983 Glue laminated wood structures. Method of determination of the interlayer strength of the glue joints
GOST R 57159-2016 Timber structures. Test method for pull-through resistance of timber fasteners

Professional Standard-Ships, Internal bond strength test method

CB/T 3794-2014 Test methods for the properties of piezoelectric ceramics.Test for electrode joint strength
CB/T 3794-1997 Test methods for piezoelectric ceramics electrode joint strength

工业和信息化部, Internal bond strength test method

HG/T 5307-2018 Test method for bonding strength of children's rubber shoe decorative fasteners
QB/T 5655-2021 Test method for bonding strength of decorative accessories for footwear
QB/T 5488-2020 Method for determination of composite strength of liquid ink

GM Daewoo, Internal bond strength test method

GMKOREA EDS-T-7713-2012 Method of Testing the Adhesion Strength of Adhesives ???? ???? ???? Version 3; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW3371 [Replaced: GMKOREA EDS-T-7713]
GMKOREA EDS-T-7904-2011

VN-TCVN, Internal bond strength test method

TCVN 4646-1988 Sintered materials.Method for testing impact strength
TCVN 6016-2011 Cement.Test methods.Determination of strength
TCVN 3121-12-2003 Mortar for masonry.Test methods.Part 12: Determination of adhesive strength of hardened mortars on substrates

American Society for Testing and Materials (ASTM), Internal bond strength test method

ASTM C1072-10 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM D6004-96 Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives
ASTM D6004-04 Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives
ASTM D6004-03 Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives
ASTM D6004-21 Standard Test Method for Determining Adhesive Shear Strength of Resilient Flooring and Carpet Adhesives
ASTM D6004-04(2011) Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives
ASTM D7005/D7005M-16 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D5884-04a(2010) Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5884-04a Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5884-04 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5884/D5884M-04A(2015)e1 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D4882-01 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D7005-03 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D7005-03(2008) Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM C1072-00a Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1072-19 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-12 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-22 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-13e1 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-11 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-13 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM D6636-01(2018) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM D7913/D7913M-14(2020) Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM C1072-05 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1072-05b Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1072-05a Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM E1803-14(2022) Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels
ASTM E229-97 Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003)
ASTM D3786/D3786M-18(2023) Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
ASTM D952-15(2021) Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D1074-96 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM D1074-02 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM D6636-01(2023) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM D4884-96(2003) Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
ASTM D4884-96 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
ASTM D4884-09 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
ASTM D4884-12 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
ASTM C147-86(1995) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C147-86(2000) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C147-86(2020) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM E518/E518M-10 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D6644-01 Standard Test Method for Tension Strength of Sew-Through Flange Buttons
ASTM D7857-16 Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures
ASTM C297-94(1999) Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM E518-09 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E72-80 Standard Methods of Conducting Strength Tests of Panels for Building Construction
ASTM E518/E518M-21 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E72-77 Standard Methods of Conducting Strength Tests Of Panels For Building Construction
ASTM E518/E518M-22 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E518/E518M-15 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D3931-93a(2005) Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D3931-93a(1999)e1 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM C1823/C1823M-20 Standard Test Method for Shear Bond Strength of Adhered Dimension Stone
ASTM C952-91(1997)e1 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM C952-12 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM C297/C297M-15 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM C297/C297M-16 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM E72-22 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
ASTM D4882-05 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D6243-06 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D6243-09 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D6243-13 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D7616/D7616M-11 Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
ASTM D1337-96 Standard Test Method for Storage Life of Adhesives by Consistency and Bond Strength
ASTM D7913/D7913M-14 Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM D4501-01e1 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D4501-01(2009)e1 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D906-98(2004) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D906-98(2011) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D906-98 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D4501-01 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D4501-95 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D4501-01(2014) Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D1062-02 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM C882-99 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM C882-05 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM C882/C882M-05e1 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM C882/C882M-12 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM C882/C882M-13 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM C882/C882M-13a Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM D2519-01 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
ASTM D2519-96 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
ASTM D2519-02 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
ASTM F692-97(2002) Standard Test Method for Measuring Adhesion Strength of Solderable Films to Substrates
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-06a(2013) Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6243/D6243M-16 Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D7105-06(2013) Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
ASTM C1860-19a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-21 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-19 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-18 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-20 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-22 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM D3654/D3654M-06 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM C952-02e1 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM C952-02 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM D1062-96e1 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM C364/C364M-06 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM C952-02(2009) Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM D8454/D8454M-22 Standard Test Method for Open-Hole Compressive Strength of Sandwich Constructions
ASTM D1062-08(2015) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM C364/C364M-16 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D1062-08 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D4501-01(2023) Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D906-20 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D2095-96(2023) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

British Standards Institution (BSI), Internal bond strength test method

BS EN 1052-5:2005 Methods of test for masonry - Determination of bond strength by the bond wrench method
BS EN 14617-15:2005 Agglomerated stone - Test methods - Determination of compressive strength
BS 5350-C6:1990 Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of bond strength in direct tension in sandwich panels
BS EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
BS 5350-C5:2002 Methods of test for adhesives - Determination of bond strength in longitudinal shear for rigid adherends
12/30237063 DC BS ISO 13910. Timber structures. Strength graded timber. Test methods for structural properties
BS EN 13286-41:2021 Tracked Changes. Unbound and hydraulically bound mixtures. Test method for the determination of the compressive strength of hydraulically bound mixtures
BS EN 14617-2:2004 Agglomerated stone-Test methods-Part 2:Determination of flexural strength(bending)
BS EN 13892-8:2002 Methods of test for screed materials - Determination of bond strength
BS EN 15737:2009 Timber structures - Test methods - Torsional resistance of driving in screws
BS 5350-C1:1986 Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of cleavage strength of adhesive bonds
BS 1932-2:1989 Testing the strength of yarns and threads from packages - Methods for determination of knot strength and loop strength
BS EN 302-1:2004 Adhesives for load bearing timber structures - Test methods - Determination of bond strength in longitudinal tensile shear strength
BS EN 196-1:2005 Methods of testing cement - Determination of strength
20/30410965 DC BS EN 13286-41. Unbound and hydraulically bound mixtures. Part 41. Test method for the determination of the compressive strength of hydraulically bound mixtures
BS EN 302-1:2023 Adhesives for load-bearing timber structures. Test methods - Determination of longitudinal tensile shear strength
BS EN IEC 61189-2-501:2022 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Test methods for materials for interconnection structures. Measurement of resilience strength and resilience strength retention factor…
BS EN 595:1995 Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour
BS AU 180-2:1982 Brake linings. Method for measurement of internal shear strength of lining material
BS 5350-C15:1990 Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of bond strength in compressive shear
BS EN 61033:2007 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
BS EN 61033:2006 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
BS EN 14617-2:2016 Tracked Changes. Agglomerated stone. Test methods. Determination of flexural strength (bending)
BS EN 13408:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength
BS ISO 19207:2016 Thermal spraying. Classification method of adhesive strength by indentation
PD ISO/TR 18124:2006 Plastics piping systems. Multilayer M (metal) pipes. Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
BS EN 13572:2002 Footwear - Test methods for uppers, lining and insocks - Seam strength
BS EN 13571:2002 Footwear - Test methods for uppers, lining and insocks - Tear strength
BS EN 13571:2002(2004) Footwear - Test methods for uppers, lining and insocks - Tear strength
BS EN ISO 17697:2016 Footwear. Test methods for uppers, lining and insocks. Seam strength
DD 86-1-1983 Damp-proof courses. Methods of test for flexural bond strength and short term shear strength

ES-UNE, Internal bond strength test method

UNE-ISO 19594:2022 Graphic technology. Test method for the determination of the binding strength for perfect-bound products. Page- pull test working upwards
UNE-EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
UNE-EN 1052-2:2018 Methods of test for masonry - Part 2: Determination of flexural strength. (Consolidated versión)

Professional Standard - Civil Aviation, Internal bond strength test method

MH/T 3027-2013 Test method for adhesion or cohesion strength of thermal spray coatings

AENOR, Internal bond strength test method

UNE-EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
UNE-EN 13286-40:2003 Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
UNE-EN 13286-42:2003 Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
UNE-EN 1052-5:2006 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
UNE-EN ISO 9653:2001 ADHESIVES. TEST METHOD FOR SHEAR IMPACT STRENGTH OF ADHESIVE BONDS. (ISO 9653:1998)
UNE 11014:1989 TEST METHODS FOR DETERMINATION OF STRENGHT OF TABLES.
UNE 11012:1989 TEST METHODS FOR DETERMINATION OF STRENGTH OF SETTEES.
UNE-EN 302-1:2013 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
UNE-EN 13286-48:2006 Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation
UNE-EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels

Danish Standards Foundation, Internal bond strength test method

DS/EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
DS/EN 13286-40:2003 Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
DS/EN 13286-42:2003 Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
DS/EN 1052-5:2005 Methods of test for masonry - Part 5: Determinaton of bond strength by the bond wrench method
DS/IEC 1033:1994 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
DS/EN 302-1:1994 Adhesives for load-bearing timber structures. Test methods. Part 1: Determination of bond strength in longitudinal tensile shear
DS/EN 302-1:2013 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
DS/EN 13286-48:2006 Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverization
DS/EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
DS/EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels

Lithuanian Standards Office , Internal bond strength test method

LST EN 13286-41-2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
LST EN 302-1-2004 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of bond strength in longitudinal tensile shear strength
LST EN 13286-40-2003 Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
LST EN 13286-42-2003 Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
LST EN 1052-5-2005 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
LST EN ISO 9653:2000 Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998)
LST EN 13286-48-2005 Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation
LST EN 1542-2000 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
LST EN 594-2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels

AT-ON, Internal bond strength test method

OENORM EN 13286-41-2021 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
ONORM EN 302-1-1992 Adhesives for load bearing timber structures - Test methods - Determination of bond strenght in longitudinal tensile shear
OENORM EN 302-1-2021 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength

European Committee for Standardization (CEN), Internal bond strength test method

EN 13286-43-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-4-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-3-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-41-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 1052-5:2005 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
EN 13892-8:2002 Methods of test for screed materials - Part 8: Determination of bond strength
EN 14617-15:2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN 6031:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test)
EN 205:1991 Test methods for wood adhesives for non-structural applications; determination of tensile shear strength of lap joints
EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
prEN 302-1-2021 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
EN 302-1:2023 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
EN 13572:2001 Footwear - Test Methods for Uppers, Lining and Insocks - Seam Strength

German Institute for Standardization, Internal bond strength test method

DIN EN 13286-41:2022 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
DIN EN 13286-41:2020 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures; German and English version prEN 13286-41:2020
DIN EN 1052-5:2005-06 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method; German version EN 1052-5:2005
DIN EN 1052-5:2005 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method; German version EN 1052-5:2005
DIN EN 13892-8:2003 Methods of test for screed materials - Part 8: Determination of bond strength; German version EN 13892-8:2002
DIN EN 14617-15:2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength; German version EN 14617-15:2005
DIN EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2008
DIN EN 61033:2007 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate (IEC 61033:1991 + A1:2006); German version EN 61033:2006
DIN EN 14617-2:2016-09 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2016
DIN 13990:2017-04 Dentistry - Test methods for shear bond strength of adhesives for orthodontic attachments
DIN EN ISO 9653:2000-10 Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998); German version EN ISO 9653:2000
DIN EN 13892-8:2003-02 Methods of test for screed materials - Part 8: Determination of bond strength; German version EN 13892-8:2002
DIN 13990:2017 Dentistry - Test methods for shear bond strength of adhesives for orthodontic attachments
DIN EN 302-1:2023-05 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength; German version EN 302-1:2023
DIN EN 302-1:2023 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
DIN EN 594:2011-09 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels; German version EN 594:2011

Professional Standard - Commodity Inspection, Internal bond strength test method

SN/T 1665-2005 Test method for peeling strength of sole adhesive bonds of shoes

Association Francaise de Normalisation, Internal bond strength test method

NF EN 595:1995 Structures en bois - Méthodes d'essais - Essais des fermes pour la détermination de la résistance et de la rigidité.
NF P12-705*NF EN 1052-5:2005 Methods of test for masonry - Part 5 : determination of bond strength by the bond wrentch method
NF P21-382:1996 Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels.
NF EN 14617-2:2016 Pierre agglomérée - Méthodes d'essai - Partie 2 : détermination de la résistance à la flexion (traction)
NF EN 13892-8:2003 Méthodes d'essai des matériaux pour chapes - Partie 8 : détermination de la force d'adhérence
NF T76-152-1:1992 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES. TEST METHODS. PART 1 : DETERMINATION OF BOND STRENGTH IN LONGITUDINAL TENSILE SHEAR. (EUROPEAN STANDARD EN 302-1).
NF P21-381*NF EN 595:1995 Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour.
NF B10-602-15:2005 Agglomerated stone - Test methods - Part 15 : determination of compressive strength.
NF P14-204-8*NF EN 13892-8:2003 Methods of test for screed materials - Part 8 : determination of bond strength.
NF EN 12773:2000 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance du point de couture
NF EN 13868:2003 Cathéters - Méthodes d'essai de résistance à la plicature pour cathéters à simple voie et tubes à usage médical
NF P18-511-4/IN1*NF EN 14488-4/IN1:2008 Testing sprayed concrete - Part 4 : bond strength of cores by direct tension
NF P21-389*NF EN 15737:2009 Timber structures - Test methods - Torsional resistance of driving in screws
NF B10-602-2:2008 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending).
NF C26-285*NF EN 61033:2007 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF G62-108:2002 Footwear - Test methods for uppers, lining and insocks - Tear strength.
NF G62-207*NF EN 12745:2000 Footwear - Test methods for insoles - Heel pin holding strength
NF T76-152-3:1992 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES. TEST METHODS. PART 3 : DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH. (EUROPEAN STANDARD EN 302-3).
NF P21-303*NF EN 383:2007 Timber structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners

GOSTR, Internal bond strength test method

GOST R 57790-2017 Timber bearing structures. Methods of strength and deformability testing
GOST R 57953-2017 Ceramics composites. Test Method for bond strength of ceramic materials
GOST R 56783-2019 Polymer composites. Method for determination of flatwise tensile strength of sandwich constructions
GOST R 58336-2018 Anchor angular emphasis. Test methods

SAE - SAE International, Internal bond strength test method

SAE J1882-1994 METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)
SAE J1882-1987 METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)

Japanese Industrial Standards Committee (JISC), Internal bond strength test method

JIS Z 8841:1993 Granules and agglomerates -- Test methods for strength
JIS P 8210:1994 Testing method for strength of paper pulp
JIS M 8711:1993 Iron ore sinter -- Determination of shatter strength
JIS M 8711:2011 Iron ore sinter -- Determination of shatter strength
JIS A 1709:1994 Method of test for strength and durability of equipment unit for dwellings
JIS P 8136:1994 Testing method of abrasion resistance of paperboard
JIS P 8139:1994 Testing method for ply adhesion of paperboard
JIS K 6849:1994 Testing methods for tensile strength of adhesive bonds

AASHTO - American Association of State Highway and Transportation Officials, Internal bond strength test method

TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
TP 91-2011 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Asphalt Bond Strength (ABS) Test
T 317-2004 Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures
T 220-1966 Standard Method of Test for Determination of the Strength of Soil-Lime Mixtures

The American Road & Transportation Builders Association, Internal bond strength test method

AASHTO TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
AASHTO TP 91-2011 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Asphalt Bond Strength (ABS) Test

US-ACEI, Internal bond strength test method

IPC TM-650 2.4.21-1997 Land Bond Strength, Unsupported Component Hole Revision D(Test Methods Manual)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Internal bond strength test method

GB/T 1452-2018 Test method for flatwise tension strength of sandwich constructions

Professional Standard - Pharmaceutical Packaging, Internal bond strength test method

YBB 0012(03)-2003 Heat Seal Strength Determination Method (Trial)

Indonesia Standards, Internal bond strength test method

SNI 2813-2008
SNI 0566-2009
SNI 03-6429-2000 Test methods for compressive strength of concrete cylinders cast in place in cylindrical mold
SNI 08-6329-2000 Test methods for adhesive strength of backing of textile floor covering
SNI 13-3606-1994 Methods for identification of crystalline compounds by x-raydiffraction
SNI 13-6168-1999 Test methods of in situ uniaxial compressive strength for determining deformability and strength of weak rock
SNI 19-0363-1989 Test method for sewing strength of gunny sacks
SNI 03-6758-2002 Test method for compressive strength of asphalt mixture

Group Standards of the People's Republic of China, Internal bond strength test method

T/CBCSA 33-2020 Method for determination of bond strength of ceramic tiles
T/YH 1005-2020 Test method for static strength of launch vehicle cone structure

International Electrotechnical Commission (IEC), Internal bond strength test method

IEC 61033:1991/AMD1:2006 Amendment 1 - Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
IEC 61033:1991 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate

Professional Standard - Textile, Internal bond strength test method

FZ/T 80007.1-1999 Test method for peel strength of garments using fusible interlinings
FZ/T 90080.2-1995 Test method for impact strength of plastic pick knots for looms
FZ/T 90079.2-1995 Test method for impact strength of nitrile pick knots for cotton looms
FZ/T 90079.3-1995 Test method for tensile strength of nitrile pick knots for cotton looms

中国轻工总会, Internal bond strength test method

ZBY 75015-1989 Test method for peel strength of garments using adhesive linings

US-FCR, Internal bond strength test method

FCR FED SSBA 1-1969 SHEAR STRENGTH OF BONDING AGENTS FOR BONDED CONSTRUCTION JOINTS IN CONCRETE, METHOD OF TEST AND TEST REQUIREMENTS FOR

SE-SIS, Internal bond strength test method

SIS SS 13 42 33-1989 Methods of testing cement — Determination of strength

NZ-SNZ, Internal bond strength test method

AS/NZS 4266.32:2004 Reconstituted Wood-Based Panels - Methods of Test Method 32: Veneer Bond Strength
AS/NZS 3572.20:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 20: Method for the Determination of the Peel Strength of the Bond between Laminate Layers

KR-KS, Internal bond strength test method

KS F 2760-2018(2023) Standard test method for the slant shear strength of structural bonding agents of concrete structures
KS F 2732-2018(2023) Standard test method for pull-out strength to conclude compressive strength of concrete
KS L ISO 679-2022 Cement — Test methods — Determination of strength
KS F 2902-2008(2023) Test methods for bond strength of sprayed fire resistive material applied to structural members
KS M ISO 17697-2019 Footwear — Test methods for uppers, lining and insocks — Seam strength

Shandong Provincial Standard of the People's Republic of China, Internal bond strength test method

DB37/T 3589-2019 Preparation method of test sample for bonding strength between remanufactured laser cladding layer and substrate
DB37/T 3590-2019 Test method and evaluation of bonding strength between remanufactured laser cladding layer and substrate

Professional Standard - Automobile, Internal bond strength test method

QC/T 558-1999 Destructive test method for bimetal bond strength of automobile engine bearing

国家质量监督检验检疫总局, Internal bond strength test method

SN/T 4706-2016 Test method for tensile strength of joints in fiberboard box manufacturing for transportation packaging

CZ-CSN, Internal bond strength test method

CSN EN 196-1-1993 Methods of testing cement. Determination of strength
CSN 42 0892 Cast.5-1980 Testing of sintered carbides. Determination of transverse rupture strength

Professional Standard - Railway, Internal bond strength test method

TB/T 2541-1995 Test method for static strength of diesel and electric locomotive body
TB/T 2368-1993 Test method for static strength of diesel and electric locomotive bogies

(U.S.) Ford Automotive Standards, Internal bond strength test method

FORD FLTM BN 121-1-2001 BOND STRENGTH TEST - INTERIOR TRIM DECORATIONS (Replaces FLTM BN 021-01)

BE-NBN, Internal bond strength test method

NBN-EN 302-4-1994
NBN-EN 302-1-1994
NBN-EN 196-1-1991 Methods of testing cement - Determination of strength

TR-TSE, Internal bond strength test method

TS 3443-1980 TEST METHOD FOR BOND STRENGTH OF MORTAR TO MASONRY UNITS

Professional Standard - Electron, Internal bond strength test method

SJ/T 11112-1996 Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings Part 2 Adhesion strength tests
SJ 2355.5-1983 Method of measurement for luminous intensity and half-intensity angle of light-emitting devices
SJ/T 11109-1996 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 5 Adhesion strength tests

Professional Standard - Chemical Industry, Internal bond strength test method

HGB 4045-1960 Determination of Bonding Strength of Rubber and Metal by Shear Method
HG/T 3864-2008 V-belts.Adhesive strength between constitutive elements.Test methods
HG/T 3864-2006 Method for Determination of Interlaminar Adhesion Strength of V-belts

AIA/NAS - Aerospace Industries Association of America Inc., Internal bond strength test method

NASM1312-8-1997 Fastener Test Methods; Method 8 Tensile Strength

IN-BIS, Internal bond strength test method

Professional Standard - Ferrous Metallurgy, Internal bond strength test method

YB/T 5123-1993 Test method for cold rupture bonding strength of refractory mortar
YB/T 5163-1993 Test method for hot rupture bonding strength of refractory mortar
YB/T 5124-1993 Test method for cold shear bond strength of refractory mud

CEN - European Committee for Standardization, Internal bond strength test method

EN 14617-2:2004 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

Malaysia Standards, Internal bond strength test method

MS 1505-2000 Method of test for determination of bond strength for flexible plastics laminates

Association of German Mechanical Engineers, Internal bond strength test method

DVS 2304-1973 Testing of the adhesive strength of thermally sprayed layers by means of destructive methods

YU-JUS, Internal bond strength test method

JUS H.N8.216-1989 Testing of paper and paperboard. Determination of tenxile properties. Internal bond strength in "z" direction

Professional Standard - Agriculture, Internal bond strength test method

309药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4008 Determination of heat seal strength
GB 10024-1988 Test method for knot fastness of synthetic fiber fishing nets

Professional Standard - Non-ferrous Metal, Internal bond strength test method

YS/T 485-2005 Sintered bimetal material-Determination of shear strength

Canadian General Standards Board （CGSB), Internal bond strength test method

CAN/CGSB-4.2 NO.65-M91-1991 Textile test methods Determination of strength of bonds of bonded@ laminated and fused fabrics

Professional Standard - Aquaculture, Internal bond strength test method

SC/T 5019-1988 Test method for knot fastness of synthetic fiber fishing nets