ZH
RU
ES
About the viscosity of pet
About the viscosity of pet, Total:377 items.
In the international standard classification, About the viscosity of pet involves: Measurement of volume, mass, density, viscosity, Plastics, Paints and varnishes, Glass, Vocabularies, Vacuum technology, Adhesives, Petroleum products in general, Fuels, Lubricants, industrial oils and related products, Welding, brazing and soldering, Waxes, bituminous materials and other petroleum products, Construction materials, Pulps, Office machines, Medical equipment, Road engineering, Road vehicle systems, Electromechanical components for electronic and telecommunications equipment, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, CHEMICAL TECHNOLOGY, Road vehicles in general, Internal combustion engines for road vehicles, Radiation measurements, Radiation protection, Electricity. Magnetism. Electrical and magnetic measurements, Mobile services, Electrical accessories, Materials for aerospace construction, Bearings, Cereals, pulses and derived products, Surface treatment and coating, Safety of machinery, Telecommunication systems, Applications of information technology, Document imaging applications, Products of the textile industry, Inks. Printing inks, Ergonomics, ROAD VEHICLE ENGINEERING, Structures of buildings, Cutting tools, Radiocommunications, Electrical engineering in general, Soil quality. Pedology, Measurement of fluid flow, FOOD TECHNOLOGY, Furniture, Quality, Analytical chemistry, SOCIOLOGY. SERVICES. COMPANY ORGANIZATION AND MANAGEMENT. ADMINISTRATION. TRANSPORT, Components for electrical equipment, Pipeline components and pipelines, Aerospace electric equipment and systems, Rubber and plastics products, Iron and steel products, Wood, sawlogs and sawn timber, Wood-based panels, Farming and forestry, Construction industry.
German Institute for Standardization, About the viscosity of pet
- DIN 53018-2:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Sources of Errors and Corrections concerning Cylinder; Rotation Viscometers
- DIN 51563:2011-04 Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m
- DIN EN 16896:2017-02 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter; German version EN 16896:2016 / Note: To be replaced by DIN EN ISO 23581 (2019-03).
- DIN EN ISO 18335:2023-06 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO/DIS 18335:2023); German and English version prEN ISO 18335:2023 ...
- DIN EN ISO 23581:2023-06 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscometer (ISO/DIS 23581:2023); German and English version prEN ISO 23581:2023 / Note: Date of issue 2023-04-28*Intended as replacement for DIN E...
- DIN 51563:2011 Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m
- DIN 51563:1976 Testing of Mineral Oils and Related Materials; Determination of Viscosity Temperature Relation; Slope m
- DIN CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode; German version CEN/TS 15324:2008
- DIN EN ISO 23581:2023 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscometer (ISO/DIS 23581:2023); German and English version prEN ISO 23581:2023
- DIN 53014-1:1994-02 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions / Note: To be replaced by DIN 53014-1 (2019-03).
- DIN 53014-2:1994-02 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
- DIN 55540-1 Beiblatt 1:1979 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
- DIN 4108-11:2018-11 Thermal insulation and energy economy in buildings - Part 11: Minimum requirements to the durability of bond strength with adhesive tapes and adhesive masses for the establishment of airtight layers
- DIN EN 16994:2018 Clay geosynthetic barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
- DIN EN 16994:2018-07 Clay geosynthetic barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures); German version EN 16994:2018
- DIN 55540-1 Beiblatt 1:1979-01 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
- DIN EN 999:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body; German version EN 999:1998+A1:2008
- DIN EN 12618-2:2004-11 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength; German version EN 12618-2:2004
- DIN 55350-13:1987 Concepts in quality and statistics; concepts relating to the accuracy of methods of determination and of results of determination
- DIN EN 17123:2019-07 Water quality - Guidance on determining the degree of modification of the hydromorphological features of transitional and coastal waters; German version EN 17123:2018
- DIN EN 50492:2014 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations; German version EN 50492:2008 + A1:2014
- DIN EN 17123:2019 Water quality - Guidance on determining the degree of modification of the hydromorphological features of transitional and coastal waters
- DIN EN 1542:1999-07 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off; German version EN 1542:1999
American Society for Testing and Materials (ASTM), About the viscosity of pet
- ASTM D4603-03(2011)e1 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
- ASTM D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
- ASTM D1200-10(2018) Standard Test Method for Viscosity by Ford Viscosity Cup
- ASTM C896-20 Standard Terminology Relating to Clay Products
- ASTM C896-21 Standard Terminology Relating to Clay Products
- ASTM C896-17a Standard Terminology Relating to Clay Products
- ASTM C896-17 Standard Terminology Relating to Clay Products
- ASTM C896-20e1 Standard Terminology Relating to Clay Products
- ASTM C896-04 Standard Terminology Relating to Clay Products
- ASTM D7110-21 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D7110-20 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D7110-05 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D7867-13(2020) Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
- ASTM D5125-10(2020)e1 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
- ASTM D5133-05(2011) Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-12 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D3381-09 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
- ASTM D7110-14 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM F1596-07 Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity
- ASTM E1671-95a(2012) Standard Classification for Serviceability of an Office Facility for Cleanliness
- ASTM D5125-10(2014) Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
- ASTM D5133-05 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D7110-05a(2011) Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM E1794-00 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200oF Elevated Humidity Service), Type II Panels
- ASTM E1794-03 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200176;F Elevated Humidity Service), Type II Panels
- ASTM D5125-97 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
- ASTM D5125-97(2005) Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
- ASTM D7110-05a Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM C882/C882M-20 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
- ASTM D7110-15 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM G126-00(2008) Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
- ASTM G126-00 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
- ASTM G126-94 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
- ASTM G126-16 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
- ASTM F1596-15 Standard Test Method for Exposure of a Membrane Switch or Printed Electronic Device to Temperature and Relative Humidity
- ASTM D7867-13 Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
- ASTM F1995-00(2005) Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
- ASTM F1995-00 Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
- ASTM D7643-16 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
- ASTM D7247-16 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
- ASTM D4684-14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D6467-13e1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
- ASTM D7857-16 Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures
- ASTM D6896-14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
- ASTM D3658-01 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM A981/A981M-23 Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Seven-Wire Steel Strand, Grade 270 [1860], Used in Prestressed Ground Anchors
- ASTM D5883-96e1 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
- ASTM D5883-18 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
- ASTM D5883-12e1 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
- ASTM A981/A981M-11(2016) Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
British Standards Institution (BSI), About the viscosity of pet
- BS 7034-1:1988 Viscosity and viscometric fixed points of glass. Recommendations for use in the determination of viscosity and viscometric fixed points
- BS ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
- 23/30463813 DC BS EN ISO 18335. Petroleum products and related products. Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density. Method by constant pressure viscometer
- BS ISO 14615:1997 Adhesives. Durability of structural adhesive joints. Exposure to humidity and temperature under load
- 19/30385422 DC BS EN ISO 23581. Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter
- BS ISO 14615:1998 Adhesives - Durability of structural adhesive joints - Exposure to humidity and temperature under load
- BS DD CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
- DD CEN/TS 15324:2008 Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
- PD ISO/TS 21219-19:2016 Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
- BS ISO 19210:2017 Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
- BS EN 14258:2004 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
- BS EN 17618:2021 Adhesives. Wood-to-wood adhesive bonds for non-structural applications. Determination of shear strength by compressive loading
- BS EN 17668:2022 Adhesives for floor coverings. Preparation of adhesive application. Test methods for the determination of corresponding humidity of mineral substrates
- BS EN 205:2016 Tracked Changes. Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
- 20/30425667 DC BS EN 17618. Adhesives. Wood-to-wood adhesive bonds for non-structural applications. Determination of shear strength by compressive loading
- BS EN 50492:2008 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations
- BS EN 302-1:2023 Adhesives for load-bearing timber structures. Test methods - Determination of longitudinal tensile shear strength
- BS EN 12961:2001 Adhesives for leather and footwear materials - Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives
- BS EN 12961:2001(2005) Adhesives for leather and footwear materials - Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives
- BS EN 302-3:2023 Adhesives for load-bearing timber structures. Test methods - Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
- BS ISO 4386-1:2019 Tracked Changes. Plain bearings. Metallic multilayer plain bearings. Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
- BS IEC 61624:1997 Guidance on the development of lists of maximum allowable temperatures for polymeric compounds used in electrotechnical equipment
- PD ISO/TR 15801:2017 Document management. Electronically stored information. Recommendations for trustworthiness and reliability
- BS ISO 4386-2:2019 Tracked Changes. Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
- BS EN 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial appli...
- BS EN IEC 61326-3-2:2018 Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applica...
- BS EN 17123:2018 Water quality. Guidance on determining the degree of modification of the hydromorphological features of transitional and coastal waters
- BS EN 302-4:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength
- BS EN 4708-301:2018 Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification - Adhesive lined polyolefin sleevings. Operating temperature - 55 °C to 105 °C. Product Standard
- BS ISO 4586-3:2018 High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
- 21/30439574 DC BS EN 302-1. Adhesives for load-bearing timber structures. Test methods. Part 1. Determination of longitudinal tensile shear strength
- BS EN 438-3:2016 Tracked Changes. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
- PD IEC TR 63170:2018 Measurement procedure for the evaluation of power density related to human exposure to radio frequency fields from wireless communication devices operating between 6 GHz and 100 GHz
- BS EN 1193:1998 Timber structures - Structural timber and glued laminated timber - Determination of shear strength and mechanical properties perpendicular to the grain
- BS ISO 4586-5:2018 High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- BS 8449:2005 Building and construction sealants with movement accommodation factors greater than 25% - Method of test for determination of adhesion/cohesion properties at variable temperatures
- BS EN 438-5:2016 Tracked Changes. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- 21/30443370 DC BS EN 302-3. Adhesives for load-bearing timber structures. Test methods. Part 3. Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
ESDU - Engineering Sciences Data Unit, About the viscosity of pet
- ESDU 68036-1968 Introductory memorandum on the viscosity of liquids and the classification of lubricating oils.
- ESDU 78021 C-1990 Guide to Items on the strength and stability of struts.
- FAT E.07.02-1965 Notes supplementary to E.07.01 on the fatigue strength of aluminium alloys.
- ESDU 95012 A-1997 NON-NEWTONIAN FLUIDS: OBTAINING VISCOMETRIC DATA FOR FRICTIONAL PRESSURE LOSS ESTIMATION FOR PIPEFLOW
- ESDU 95012 B-2004 Non-Newtonian fluids: obtaining viscometric data for frictional pressure loss estimation for pipeflow.
Association Francaise de Normalisation, About the viscosity of pet
- NF EN 16896:2018 Produits pétroliers et produits connexes - Détermination de la viscosité cinématique - Méthode avec le viscosimètre Stabinger
- NF M07-163*NF EN 16896:2018 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
- NF B30-010:1967 Glass. Vocabulary of characteristic temperatures related to glass viscosities.
- NF EN 14258:2005 Adhésifs - Comportement mécanique des assemblages collés soumis à une exposition à court et long termes à des conditions de température spécifiées
- FD CEN/TR 16417:2016 Chaussures - Lignes directrices pour l'industrie de la chaussure relative aux substances extrêmement préoccupantes (Annexe XIV du REACH)
- NF ISO 8003:1986 Produits carbonés utilisés pour la production de l'aluminium - Brai pour électrodes - Détermination de la viscosité dynamique.
- NF T76-053*NF EN 14258:2005 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
- NF EN 14263:2004 Produits dérivés de la pyrolyse du charbon - Liants à base de goudron et de brais issus de la houille et produits connexes : brai liant pour pièces carbonées - Caractéristiques et méthodes d'essai
- NF C99-124:2009 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations.
- NF EN 61326-3-1:2017 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 3-1 : exigences d'immunité pour les systèmes relatifs à la sécurité et pour les matériels destinés à réaliser des fonctions relatives à l...
- NF EN ISO 13426-2:2005 Géotextiles et produits apparentés - Résistance des liaisons de structures internes - Partie 2 : géocomposites
- NF EN 419251-3:2013 Produits isolants thermiques pour le bâtiment - produits à base de granulats légers d'argile expansée formés en place destinés aux applications du bâtiment - Partie 2 : spécification relative aux produits installés
- NF EN 14424:2013 Produits isolants thermiques pour le bâtiment - produits à base de granulats légers d'argile expansée formés en place destinés aux applications du bâtiment - Partie 2 : spécification relative aux produits installés
- NF EN 14063-2:2013 Produits isolants thermiques pour le bâtiment - produits à base de granulats légers d'argile expansée formés en place destinés aux applications du bâtiment - Partie 2 : spécification relative aux produits installés
- NF EN 419251-1:2013 Produits isolants thermiques pour le bâtiment - produits à base de granulats légers d'argile expansée formés en place destinés aux applications du bâtiment - Partie 2 : spécification relative aux produits installés
- NF G38-205*NF EN 16994:2018 Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
- NF EN ISO 13426-1:2019 Géotextiles et produits apparentés - Résistance des liaisons de structures internes - Partie 1 : géosynthétiques alvéolaires
- UTE C93-524U*UTE C93-524:1980 Components for electronic equipment. Wires for high temperatures up to 150 degrees C. Relevant article sheets.
- NF EN 302-1:2023 Adhésifs pour structures portantes en bois - Méthodes d'essais - Partie 1 : détermination de la résistance au cisaillement en traction longitudinale
- NF P18-807:1989 Produits spéciaux destinés aux constructions en béton hydraulique - Produits à base de liants hydrauliques ou de résines synthétiques - Perte au feu à + 450 degrés Celsius et teneur en cendres à + 950 degrés Celsius.
- NF E09-052*NF EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body
- NF C93-182-2:2020 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2 : ring-cores
- NF T54-046:1978 Low density polyethylene (pe-bd) pipes and fittings. Chemical resistance with respect to fluids to be conveyed.
- NF EN 14264:2004 Produits dérivés de la pyrolyse du charbon - Liants à base de goudron et de brais issus de la houille et produits connexes : brai d'imprégnation - Caractéristiques et méthodes d'essai
- NF EN IEC 61326-3-2:2018 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 3-2 : exigences d'immunité pour les systèmes relatifs à la sécurité et pour les matériels destinés à réaliser des fonctions relatives à la ...
- NF EN 14265:2004 Produits dérivés de la pyrolyse du charbon - Liants à base de goudron et de brais issus de la houille et produits connexes : goudron pour peinture - Caractéristiques et méthodes d'essai
- NF T54-301-3*NF EN 438-3:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3 : classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
- NF L53-152-301*NF EN 4708-301:2018 Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 301 : adhesive lined polyolefin sleevings - Operating temperature - 55 oC to 105 oC - Product Standard
- NF T90-872*NF EN 17123:2018 Water quality - Guidance on determining the degree of modification of the hydromorphological features of transitional and coastal waters
- NF T54-301-5*NF EN 438-5:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5 : classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- NF T76-152-3/A1:2006 Adhesives for load-bearing timber structures - Test methods - Part 3 : determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength.
- NF EN 17418:2021 Adhésifs bicomposants polyuréthanes et époxydiques pour la réparation sur site de structures en bois fissurées - Essais, exigences et vérification de la résistance des réparations
- FD E23-008-3*FD ISO/TR 10064-3:2001 Cylindrical gears - Code of inspection practice - Part 3 : recommendations relative to gear blanks, shaft centre distance and parallelism of axes
Korean Agency for Technology and Standards (KATS), About the viscosity of pet
- KS A 0506-3-2002(2012) Methods of calibration for viscosity gauge
- KS M ISO 23581:2022 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
- KS M 3725-2003 TESTING METHODS FOR PEEL STRENGTH OF ADHESIVES
- KS M 3725-1987 TESTING METHODS FOR PEEL STRENGTH OF ADHESIVES
- KS M 3725-1982 TESTING METHODS FOR PEEL STRENGTH OF ADHESIVES
- KS M ISO 14615-2007(2022) Adhesives－Durability of structural adhesive joints－Exposure to humidity and temperature under load
- KS M 2208-2007(2022) Viscosity－Graded asphalt cement for use pavement construction
- KS F 2386-2013(2018) Standard test method for adhesive strength between pavement layers
- KS M 2013-2007(2017) Testing method for saybolt viscosity of crude oils and petroleum products
- KS F 2902-2008(2018) Test methods for bond strength of sprayed fire resistive material applied to structural members
- KS B ISO 4386-1:2021 Plain bearings — Metallic multilayer plain bearings —Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0.5 mm
- KS H ISO 4112:2009 Cereals and pulses－Guidance on measurement of the temperature of grain stored in bulk
- KS R 1104-1991(2011) Shear strength test procedure for drum brake shoe assemblies and pads of automobiles
- KS L ISO 603-14-2014(2019) Bonded abrasive products — Dimensions — Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
- KS B ISO 7066-2:2014 Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships
- KS B ISO 7066-2:2004 Assessment of uncertainty in the calibration and use of flow measurement devices-Part2:Non-linear calibration relationships
- KS B ISO 4386-2:2022 Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
- KS B ISO 4386-2:2016 Plane bearings－Metallic multilayer plain bearings－Part 2：Destructive testing of bond for bearing metal layer thicknesses ≥ 2 mm
Standard Association of Australia （SAA）, About the viscosity of pet
- AS 3568:2020 Oils for reducing the viscosity of bituminous binders for pavements
- AS/NZS 2341.4:2015
- AS 2341.4:2023 Methods of testing bitumen and related roadmaking products, Method 4: Determination of dynamic viscosity by rotational viscometer
- AS 2341.4:1994 Methods of testing bitumen and related roadmaking products - Determination of dynamic viscosity by rotational viscometer
- AS/NZS ISO 15801:2014
- AS 2341.3:2020 Methods of testing bitumen and related roadmaking products, Method 3: Determination of kinematic viscosity by flow through a capillary tube
- AS 1580.481.3:2002(R2013)
- AS 1580.481.3:2002 Paints and related materials - Methods of test - Exposed to weathering - Degree of corrosion of coated metal substrates
International Organization for Standardization (ISO), About the viscosity of pet
- ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
- ISO/DIS 23581 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
- ISO 23581:2020 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
- ISO/DIS 18335 Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer
- ISO/TR 21900:2018 Guidance for uncertainty analysis regarding the application of ISO/TS 10974
- ISO 4112:1990 Cereals and pulses; guidance on measurement of the temperature of grain stored in bulk
- ISO 4386-1:2019 Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
- ISO 4386-1:1982 Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond for bearing metal layer thicknesses equal to or greater than 2 mm
- ISO 16531:2020 Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
- ISO/DIS 4586-5 High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- ISO/DIS 4586-3 High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
KR-KS, About the viscosity of pet
- KS M ISO 23581-2022 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
- KS B ISO 4386-1-2021 Plain bearings — Metallic multilayer plain bearings —Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0.5 mm
- KS B ISO 4386-2-2022 Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
AENOR, About the viscosity of pet
- UNE-EN 16896:2017 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
- UNE 40261-5:1975 SUGGESTIONS ON AN ACCEPTABLE DEGREE OF STRENGTH AGAINST THE ATTACKS BY MOTH.
- UNE-EN ISO 8510-2:2011 Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. Part 2: 180 degree peel (ISO 8510-2:2006)
- UNE-EN 12618-2:2006 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength
- UNE-EN ISO 2064:2001 Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness. (ISO 2064:1996)
- UNE-EN ISO 13855:2011 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
- UNE-EN 1542:2000 Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off.
European Committee for Standardization (CEN), About the viscosity of pet
- EN 16896:2016 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
- EN 16994:2018 Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
- CEN/TR 17292:2018 Technical report regarding precision data for standards EN 12720, EN 12721, EN 12722, EN 15185 and EN 15186
Society of Automotive Engineers (SAE), About the viscosity of pet
- SAE TS65-2-2004 TS65 Recommendation on the Adhesive Bonding of Rubbers to other Substrates
- SAE J2338-1996 Recommendations of the SAE Task Force on Headlamp Mounting Height
- SAE J2338-2010 Recommendations of the SAE Task Force on Headlamp Mounting Height
- SAE J1523-2012 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
- SAE AMS3687B-1993 (Noncurrent)Adhesive Film, Humidity-Resistant, Epoxy for Sandwich Panels, -55 to +95 Degrees C (65 to +200 Degrees F)
- SAE J1523-1993 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives, Recommended Practice
- SAE AIR1380A-1997 Recommended Practice for Measurement of Static Mechanical Stiffness Properties of Aircraft Tires R(1993)
- SAE AMS3698B-1993 (Noncurrent)Adhesive Film, Hot-Melt, Addition-Type Polyimide for Foam Sandwich Structure, -55 to +230 Degrees C (-65 to +450 Degrees F)
International Telecommunication Union (ITU), About the viscosity of pet
- ITU-T G.225-1993 RECOMMENDATIONS RELATING TO THE ACCURACY OF CARRIER FREQUENCIES
- ITU-T G.225 FRENCH-1993 RECOMMENDATIONS RELATING TO THE ACCURACY OF CARRIER FREQUENCIES
- ITU-T G.225 SPANISH-1993 RECOMMENDATIONS RELATING TO THE ACCURACY OF CARRIER FREQUENCIES
- ITU-T G.225-1989 Recommendations Relating to the Accuracy of Carrier Frequencies - International Analogue Carrier Systems (Study Group XV) 3 pp
- ITU-T R.103 SPANISH-1988 CODE AND SPEED-DEPENDANT TDM 600 BIT/S SYSTEM FOR USE IN POINT-TO-POINT OR BRANCH-LINE MULDEX CONFIGURATIONS
Institute of Interconnecting and Packaging Electronic Circuits (IPC), About the viscosity of pet
Canadian General Standards Board （CGSB), About the viscosity of pet
SG-SPRING SG, About the viscosity of pet
- SS 5 Pt.B16-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B16: Determination Of Viscosity By The Brookfield Viscometer
- SS 5 Pt.B11-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B11: Determination Of Viscosity By Ford Viscosity Cup
- SS 5 Pt.B12-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B12: Consistency Of Paints Using The Stormer Viscometer
BE-NBN, About the viscosity of pet
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., About the viscosity of pet
NZ-SNZ, About the viscosity of pet
- AS/NZS 2341.5:1997 Methods of Testing Bitumen and Related Roadmaking Products Method 5: Determination of Apparent Viscosity by 'Shell' Sliding Plate Micro-Viscometer
Institute of Electrical and Electronics Engineers (IEEE), About the viscosity of pet
IN-BIS, About the viscosity of pet
CZ-CSN, About the viscosity of pet
BR-ABNT, About the viscosity of pet
- ABNT NBR ISO 5351:2012 Pulps - Determination of the number of viscosity limit in a solution of cupric ethylenediamine (CED)
RO-ASRO, About the viscosity of pet
- STAS 9019-1985 DETERMINING OF THE CONVENTIONAL BOND STRENGHT OF THE METAL DEPOSITED FOR BRAZE WELDING
- STAS 11496-1981 MINERAL OILS FOR MOTOR VEHICLES TRANSMISSION GEAR Determination of apparent viscosity at low temperatures -with Brook field viscosimeter
IT-UNI, About the viscosity of pet
NL-NEN, About the viscosity of pet
- NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value
(U.S.) Ford Automotive Standards, About the viscosity of pet
- FORD ESS-M11P24-A1-1983 ADHESIVE, MALE THREADED FASTENER, FOR SERVICE TEMPERATURES BELOW 135 C
- FORD ESS-M11P24-A2-1983 ADHESIVE, MALE THREADED FASTENER, FOR SERVICE TEMPERATURES BELOW 65 C Shown on ESS-M11P24-A1
- FORD ESB-M2G113-A-2003 ADHESIVE, NITRILE BASE - FAST TACK - SOLVENT RELEASE TYPE - LOW VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M2G112-A
- FORD FLTM BJ 127-1-2001 SCANNING BROOKFIELD VISCOMETER TEST FOR LOW TEMPERATURE ENGINE OIL PUMPABILITY (Replaces FLTM BJ 027-01)
- FORD SK-M3G9512-AB-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF ADHESIVE, APPROVED MINIMUM THICKNESS FOR FLAMMABILITY 2,0MM Shown on SK-M3G9512-A
- FORD SK-M3G9512-BB-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF ADHESIVE, APPROVED MINIMUM THICKNESS FOR FLAMMABILITY 2,0MM Shown on SK-M3G9512-A
American National Standards Institute （ANSI), About the viscosity of pet
- ANSI/ASTM E1671:1995 Classification for Serviceability of an Office Facility for Cleanliness (04.11)
- ANSI/ASTM E1671-1995A Classification for Serviceability of an Office Facility for Cleanliness
- DS/EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body
- ANSI/ATIS 0100524-2004 Reliability-related Metrics and Terminology for Network Elements in Evolving Communications Networks
- ANSI T1.524-2004 Reliability-related Metrics and Terminology for Network Elements in Evolving Communications Networks
ES-UNE, About the viscosity of pet
- UNE-CEN/TR 16417:2016 Footwear - Footwear industry guideline for substances of very high concern (Annex XIV of REACH) (Endorsed by AENOR in April of 2016.)
- UNE-EN 16994:2020 Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
- UNE-EN 438-5:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- UNE-EN 438-3:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
API - American Petroleum Institute, About the viscosity of pet
- API REPORT 84-39-1986 Rheological Evaluation of Cement Slurries - Correlation of Concentric Cylinder and Tube Viscometers
- API BULL 5-A-1-1947 INFORMATION on MINIMUM PERFORMANCE PROPERTIES PROPOSED API HIGH-STRENGTH CASING JOINTS (First Edition)
- API 4175-1972 THIRD ANNUAL REPORT ON GASOLINE COMPOSITION AND VEHICLE EXHAUST GAS POLYNUCLEAR AROMATIC CONTENT
- API 4241-1974 FIRST ANNUAL REPORT ON POLYNUCLEAR AROMATIC CONTENT OF HEAVY DUTY DIESEL ENGINE EXHAUST GASES
- API 4223-1973 FOURTH ANNUAL (FINAL) REPORT ON GASOLINE COMPOSITION AND VEHICLE EXHAUST GAS POLYNUCLEAR AROMATIC CONTENT
- API TR 10TR3-1999 Technical Report on Temperatures for API Cement Operating Thickening Time Tests; 1993 Report from the API Task Group on Cementing Temperature Schedules (First Edition)
SAE - SAE International, About the viscosity of pet
- SAE J2338-2011 Recommendations of the SAE Task Force on Headlamp Mounting Height
- SAE J1523-2021 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
- SAE J1523-1985 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives@ Recommended Practice
- SAE AMS3698C-2016 Adhesive Film@ Hot-Melt@ Addition-Type Polyimide for Foam Sandwich Structure@ -55 to +230 Degrees C (-65 to +450 Degrees F)
VE-FONDONORMA, About the viscosity of pet
GM North America, About the viscosity of pet
- GM GM9207P-2012 Fastening Strengths of Hook and Loop Tapes (Issue 3; Do Not Use on New Programs; No Replacement)
- GM GM9013P-2010 Test for Viscosity of Adhesives and Sealers (Issue 6; Do Not Use on New Programs; Replaced by SAE J1524)
IX-EU/EC, About the viscosity of pet
- 73/362/EEC-1973 Council Directive on the Approximation of the Laws of the Member States Relating to Material Measures of Length
- 76/766/EEC-1976 Council Directive on the Approximation of the Laws of the Member States Relating to Alcohol Tables
- COM(2013) 566 FINAL-2013 REPORT FROM THE COMMISSION ANNUAL REPORT 2012 ON SUBSIDIARITY AND PROPORTIONALITY
- 87/344/EEC-1987 Council Directive on the Coordination of Laws, Regulations and Administrative Provisions Relating to Legal Expenses Insurance
- COM(2003) 18 FINAL-2003 COUNCIL DIRECTIVE on the control of high activity sealed radioactive sources
- COM(86) 764-1987 Proposal for a Council Directive on the Annual Accounts and Consolidated Accounts of Insurance Undertakings
- NO 129/2003-2003 COMMISSION REGULATION laying down detailed rules for determining the mesh size and thickness of twine of fishing nets
- 91/674/EEC-1991 Council Directive on the Annual Accounts and Consolidated Accounts of Insurance Undertakings
- 74/148/EEC-1974 Council Directive on the Approximation of the Laws of the Member States Relating to Weights of from 1 mg to 50 kg of Above-Medium Accuracy
- 75/443/EEC-1975 Council Directive on the Approximation of the Laws of the Member States Relating to the Reverse and Speedometer Equipment of Motor Vehicles
- COM(2007) 220 FINAL-2007 COMMISSION WORKING DOCUMENT LeaderSHIP 2015 Progress Report
- COM(2001) 122 FINAL-2001 Report from the Commission European Charter for Small Enterprises - Annual Implementation Report
- NO 2325/2002-2002 COMMISION REGULATION (EC) fixing the export refunds on products processed from cereals and rice
- 95/45/EC-1995 Commission Directive Laying Down Specific Purity Criteria Concerning Colours for Use in Foodstuffs
- 95/31/EC-1995 Commission Directive Laying down Specific Criteria of Purity Concerning Sweeteners for Use in Foodstuffs
- 89/459/EEC-1989 Council Directive on the Approximation of the Laws of the Member States Relating to the Tread Depth of Tyres of Certain Categories of Motor Vehicles and Their Trailers
- 1999/22/EC-1998 Council Decision Adopting a Multiannual Programme of Studies, Analyses, Forecasts and Other Related Work in the Energy Sector
- 2010/81/EU-2010 COMMISSION DECISION establishing the classes of reaction-to-fire performance for certain construction products as regards adhesives for ceramic tiles
- 76/223/EEC-1976 Commission Recommendation to the Member States Concerning Units of Measurement Referred to in Patent Conventions
- 93/465/EEC-1993 Council Decision Concerning the Modules for the Various Phases of the Conformity Assessment Procedures and the Rules for the Affixing and Use of the CE Conformity Marking, Which are Intended to Be Used in the Technical Harmonization Directives
- 97/C 248/06-1997 Amended Proposal for a Council Regulation on Speeding up and Clarifying the Implementation of the Excessive Deficit Procedure
- 86/635/EEC-1986 Council Directive on the Annual Accounts and Consolidated Accounts of Banks and Other Financial Institutions
- COM(2001) 807 FINAL-2001 Proposal for a Regulation of the European Parliament and of the Council Establishing an Ecopoint System Applicable to Heavy Goods Vehicles Travelling Through Austria for the Year 2004
- COM(2008) 8 FINAL-2008 Proposal for a COUNCIL REGULATION Amending Regulation (EC) No 866/2004 on a regime under Article 2 of Protocol 10 to the Act of Accession concerning rules on goods, services and persons crossing the Green Line in Cyprus
- COM(88) 846-1989 Proposal for a Council Directive Supplementing the Common System of Value-Added Tax and Amending Articles 32 and 28 of Directive 77/388/ EEC - Special Arrangements for Second- Hand Goods, Works of Art, Antiques and Collectors' Items
- 2008/C 29/06-2008 NOTICES FROM MEMBER STATES Commission communication in the framework of the implementation of the Directive 2004/22/EC of the European Parliament and of the Council on measuring instruments
- COM(96) 114-1996 Progress Report 1995 on the Approximation of the Laws of the Member States Concerning Telecommunications Terminal Equipment, Including the Mutual Recognition of Their Conformity Supplemented in Respect of Satellite Earth Station Equipment
The American Road & Transportation Builders Association, About the viscosity of pet
- AASHTO LDRL-1997 A Report on State Programs for Light Density Rail Lines Revision 1
RU-GOST R, About the viscosity of pet
- GOST R 41.66-1999 Uniform provisions concerning the approval of large passenger vehicles with regard to the strength of their superstructure
- GOST R 41.68-1999 Uniform provisions concerning the approval of power-driven vehicles with regard to the measurement of the maximum speed
- GOST R 41.39-1999 Uniform provisions concerning the approval of vehicles with regard to the speedometer equipment including its installation
- PNST 85-2016 Automobile roads of general use. Binding materials petroleum bituminous. Technical requirements based on temperature range of exploitation
- GOST R 57707-2017 Polymer composites. Test method for durability of adhesive joints by exposure to humidity and temperature under load
- GOST R 41.80-1999 Uniform provisions concerning the approval of seats of large passenger vehicles and of these vehicles with regard to the strength of the seats and their anchorages
- PNST 86-2016 Automobile roads of general use. Binding materials petroleum bituminous. The procedure for determination of the brand based on temperature range of exploitation
US-FCR, About the viscosity of pet
- FCR COE ER 25-2-1-1997 ANNUAL REPORT OF THE SECRETARY OF THE ARMY ON CIVIL WORKS ACTIVITIES (RCS: CONG-1006)
- FCR COE CRD-C 653-95-1995 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR DETERMINATION OF MOISTURE-DENSITY RELATION OF SOILS
AASHTO - American Association of State Highway and Transportation Officials, About the viscosity of pet
- LDRL-1997 A Report on State Programs for Light Density Rail Lines (Revision 1)
European Committee for Electrotechnical Standardization（CENELEC）, About the viscosity of pet
- EN 50492:2008 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations (Incorporates Amendment A1: 2014)
CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, About the viscosity of pet
- ERC/REC/ 01-07 E-2000 ERC Recommendation on Harmonised Regime for Exemption From Individual Licensing of Radio Equipment
Danish Standards Foundation, About the viscosity of pet
- DS/EN ISO 2064:2000 Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness
- DS/EN ISO 13855:2011 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body
- DS/ISO/TR 15801:2009 Document management - Information stored electronically - Recommendations for trustworthiness and reliability
- DS/EN 12618-2:2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength
- DS/EN 438-3:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
- DS/EN 438-5:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- DS/EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
AT-ON, About the viscosity of pet
- ONORM B 3683-1991 Technical asphalts for road construction and related purposes — Determination of bulk density
- ONORM B 3682-1991 Technical asphalts jor road constructions and related purposes — Testing of adhesion properties between bitumen and aggregate by stripping
- ONORM B 3685 Teil.2-1988 Technical aspbalts for road construction and related purposes; determination of void content of asphalts with high porosity
GOSTR, About the viscosity of pet
- GOST R 58400.1-2019 Automobile roads of general use. Petroleum-based bitumen binder. Specifications based on operational temperature range
- GOST R ISO 12505-2-2019 Skin barrier for ostomy aids. Test methods. Part 2. Wet integrity and adhesive strength
- PNST 316-2018 Pliable-costume cotton-polyester and viscose-polyester fabrics with the content of polyurethane fibers and air permeability of more than 80 dm3/m2·s. Specifications
PH-BPS, About the viscosity of pet
- PNS ISO 13855:2021 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body
- PNS ISO 4386-2:2021 Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
UY-UNIT, About the viscosity of pet
NO-SN, About the viscosity of pet
- NS 1196-1983 Metallic and other non-organic coatings - Definitions and conventions concerning the measurement of thickness
Lithuanian Standards Office , About the viscosity of pet
- LST EN 12618-2-2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength
- LST EN ISO 2064:2001 Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996)
- LST EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
- LST EN 438-3-2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
- LST EN 438-5-2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- LST EN 1542-2000 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
American Concrete Institute, About the viscosity of pet
- ACI 523.3R-1993 Guide for Cellular Concretes Above 50 pcf, and for Aggregate Concretes Above 50 pcf with Compressive Strengths Less Than 2500 psi
International Electrotechnical Commission (IEC), About the viscosity of pet
- IEC TR 60943:2009 Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
未注明发布机构, About the viscosity of pet
- NF T54-070:1978 High density polyethelene (pe-hd) pipes and fittings. Chemical resistance with respect to fluids to be conveyed.
- BS IEC 61624:1997(1999) Guidance on the development of lists of maximum allowable temperatures for polymeric compounds usedinelectrotechnical equipment —
- BS 8449:2005(2011) Building and construction sealants with movement accommodation factors greater than 25 % — Method of test for determination of adhesion / cohesion properties at variable temperatures
YU-JUS, About the viscosity of pet
- JUS C.A6.005-1987 Metallic and other non-organic coatings. Definitior.s and conventions conceming the measurement of thickness
CEN - European Committee for Standardization, About the viscosity of pet
- PD CEN/TR 17292:2018 Technical report regarding precision data for standards EN 12720@ EN 12721@ EN 12722@ EN 15185 and EN 15186
- EN 17123:2018 Water quality - Guidance on determining the degree of modification of the hydromorphological features of transitional and coastal waters
PT-IPQ, About the viscosity of pet
- NP EN 757-2000 Welding consumables Covered electrodes for manual metal arc welding of high strength steels Classification
- NP 3298-1986
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, About the viscosity of pet
- GB/T 12334-2001 Metallic and other inorganic coatings--Definitions and conventions concerning the measurement of thickness
Professional Standard - Post and Telecommunication, About the viscosity of pet
Indonesia Standards, About the viscosity of pet
- SNI 03-6827-2002 Test method for first binding time of portland cement using a vicat apparatus for civil engineering
IECQ - IEC: Quality Assessment System for Electronic Components, About the viscosity of pet
- PQC 30/US 0006-1984 Switches for Use in Electrotechnical Equipment: Detail Specification: Rotary Switch (Low-Current Rating) with Central Mounting@ Maximum 12 Positions@ 33 mm Maximum Width
- ICC (INDIA)1-1990 Inspectorate Co-Ordination Committee (ICC) Proposal by the Indian National Supervising Inspectorate for a Supplement to the Indian National Statement of Surveillance Arrangements (NSSA)
US-CFR-file, About the viscosity of pet
- CFR 49-369.4-2014 Transportation. Part369:Reports of motor carriers. Section369.4:Annual reports of Class I carriers of passengers.
ABS - American Bureau of Shipping, About the viscosity of pet
- ABS 148 CORR-2014 GUIDANCE NOTES ON STRENGTH ASSESSMENT OF MEMBRANE-TYPE LNG CONTAINMENT SYSTEMS UNDER SLOSHING LOADS APRIL 2006
CO-ICONTEC, About the viscosity of pet