ZH
RU
ES

Gas phase volume

Gas phase volume, Total:500 items.

In the international standard classification, Gas phase volume involves: Particle size analysis. Sieving, Testing of metals, Fluid power systems, Ceramics, Mining and quarrying, Products of the chemical industry, Powder metallurgy, Linear and angular measurements, Surface treatment and coating, Horology, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Fuels, Construction materials, Equipment for the metallurgical industry, Products of non-ferrous metals, Equipment for petroleum and natural gas industries, Electrical wires and cables, Packaging and distribution of goods in general, Measurement of volume, mass, density, viscosity, Coatings and related processes used in aerospace industry, Beverages, Welding, brazing and soldering, Dentistry, Inorganic chemicals, Fibre optic communications, Semiconducting materials, Installations in buildings, Analytical chemistry, Measurement of fluid flow, Metalliferous minerals, Glass, Earthworks. Excavations. Foundation construction. Underground works, Wastes, Soil quality. Pedology, Refractories, Petroleum products in general, Buildings, Electromechanical components for electronic and telecommunications equipment, Paints and varnishes, Mechanical testing, Air quality, Nuclear energy engineering, Natural gas, Cellular materials, Structures of buildings, Equipment for the chemical industry, Paint coating processes, Insulating fluids, Valves, Burners. Boilers, Quantities and units, Coals, Raw materials for rubber and plastics, Petroleum, petroleum products and natural gas handling equipment, Transformers. Reactors, Power stations in general, Road engineering, Vocabularies, Edible oils and fats. Oilseeds, Earth-moving machinery, Photography.

International Organization for Standardization (ISO), Gas phase volume

ISO 9277:2022 Determination of the specific surface area of solids by gas adsorption — BET method
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
ISO 12154:2014 Determination of density by volumetric displacement - Skeleton density by gas pycnometry
ISO 6421:2012 Hydrometry - Methods for assessment of reservoir sedimentation
ISO 16253:2007 Watch-cases and accessories - Vapour phase deposited coatings
ISO 16253:2017 Watch-cases and accessories - Vapour phase deposited coatings
ISO 13317-3:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 3: X-ray gravitational technique
ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
ISO 11461:2001 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
ISO 9277:1995 Determination of the specific surface area of solids by gas adsorption using the BET method
ISO 6711:1981 Gas analysis — Checking of calibration gas mixtures by a comparison method
ISO 5024:1976 Petroleum liquids and gases; Measurement; Standard reference conditions
ISO 6143:1981 Gas analysis; Determination of composition of calibration gas mixtures; Comparison methods
ISO 8130-2:1992 Coating powders; part 2: determination of density by gas comparison pyknometer (referee method)
ISO 8130-2:2021 Coating powders - Part 2: Determination of density by gas comparison pycnometer (referee method)
ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
ISO 1399:1976 Title missing - Legacy paper document
ISO 1399:1982 Rubber, vulcanized; Determination of permeability to gases; Constant volume method
ISO 13317-2:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method
ISO 7589:2002 Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer
ISO 6143:2001 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
ISO/CD 6143 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO/DIS 6143:2023 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO 18757:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method
ISO 22553-4:2019 Paints and varnishes — Electro-deposition coatings — Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials

German Institute for Standardization, Gas phase volume

DIN ISO 9277:2014-01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN 66126:2015-08 Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
DIN 1871:1999 Gaseous fuels and other gases - Density and other volumetric quantities
DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN 51913:2013 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN 18124:2011 Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer, gas pycnometer
DIN EN 61788-12:2014 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013); German version EN 61788-12:2013
DIN 51851:1980 Testing of gaseous fuels and other gases; calculation of reduced gas volume
DIN 51851:1980-04 Testing of gaseous fuels and other gases; calculation of reduced gas volume
DIN EN 61788-5:2014 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC 61788-5:2013); German version EN 61788-5:2013
DIN 277-3:2005 Areas and volumes of building - Part 3: Quantities and reference units
DIN 53219:2005 Paints and varnishes - Determination of percentage volume of non-volatile matter
DIN EN 772-9:2005-05 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling; German version EN 772-9:1998 + A1:2005
DIN EN ISO 4590:2016-12 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016); German version EN ISO 4590:2016
DIN 51899:2010-09 Gas analysis - Measurement programs and data evaluation procedures for gas chromatography and other comparison methods; only on CD-ROM / Note: To be amended by DIN 51899/A1 (2022-01).
DIN EN 14702-1:2006-06 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index); German version EN 14702-1:2006
DIN EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003); English version of DIN EN ISO 6144:2006-11
DIN 19683-13:2007-07 Soil quality - Physical laboratory tests - Part 13: Determination of soil volume percentage, total pore volume and pore number of mineral soils
DIN 66137-2:2004 Determination of solid state density - Part 2: Gaspycnometry
DIN 51898-1:2014 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM
DIN 51894:2012 Gas analysis - Gas chromatographic method for fuel gases/natural gas and other gas mixtures
DIN EN ISO 22553-4:2021-03 Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials (ISO 22553-4:2019); German version EN ISO 22553-4:2020
DIN 51899:2010 Gas analysis - Measurement programs and data evaluation procedures for gas chromatography and other comparison methods; only on CD-ROM
DIN EN ISO 18757:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003); English version of DIN EN ISO 18757:2006
DIN EN ISO 6143:2006-11 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006
DIN 19683-14:2007-07 Soil quality - Physical laboratory tests - Part 14: Determination of soild volume percentage of bog soils
DIN 66132:1975 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Duembgen
DIN EN ISO 18757:2006-01 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003); German version EN ISO 18757:2005
DIN EN 12405-1:2006 Gas meters - Conversion devices - Part 1: Volume conversion; English version of DIN EN 12405-1:2006-04
DIN EN 12405-1:2007 Gas meters - Conversion devices - Part 1: Volume conversion (includes Amendment A1:2006); English version of DIN EN 12405-1:2007-08
DIN EN 12405-1:2022 Gas meters - Conversion devices - Part 1: Volume conversion
DIN EN 12405-1:2018 Gas meters - Conversion devices - Part 1: Volume conversion
DIN EN 12405-1:2019 Gas meters - Conversion devices - Part 1: Volume conversion; German and English version prEN 12405-1:2019
DIN EN 12405-1:2022-02 Gas meters - Conversion devices - Part 1: Volume conversion; German version EN 12405-1:2021 / Note: This standard is part of the DVGW body of rules.
DIN 51894:2012-09 Gas analysis - Gas chromatographic method for fuel gases/natural gas and other gas mixtures

YU-JUS, Gas phase volume

JUS L.N1.046-1991 Ey?raulic fluid pofter. CylJoders. Bore and rod area ratios
JUS H.F8.125-1986 Gases. Determination of oxygen content Colorimetric method
JUS H.G8.210-1985 Reagents. Methanct. Determination of free acidcontent (as HCOOH). Volumetric method
JUS H.F8.211-1986 Gases. Acetylene. Determination ofcontent ofhy
JUS H.F8.221-1986 Gases. Acetylene. Determination of pbosphor-hydrogene content. Vohmetric method
JUS H.B8.239-1988 Ethanot for industrial use. Determination of methanol content (methanol contents between 0,10 and 1J50% (V/V)). Visualcolorimetricmethod
JUS H.F8.402-1990 Gas analysis. Deteralnation of composition of calibration gas mixtures. Comparlstm methods
JUS H.B8.314-1977 Sodium and potassium silicates for industrial use. Determination of density at 20 °C of products in solution. Method using density hidrometar and method using pyknometer
JUS H.F8.602-1991 Natural gas. Determination of potencial hydrocarbon liquid content. Volumetric metbod
JUS H.F8.122-1986 Gases. Determination of oxygen content. Gas chromatographic method
JUS H.F8.231-1986 Gases. Determination of hydrocarbons content Gas chromatographic metbod

Japanese Industrial Standards Committee (JISC), Gas phase volume

JIS Z 8830:1990 Determination of the specific surface area of powders by gas adsorption methods
JIS Z 8830:2013 Determination of the specific surface area of powders (solids) by gas adsorption -- BET method
JIS Z 8830 ERRATUM 1:2002 Determination of the specific surface area of powders (solids) by gas adsorption method (Erratum 1)
JIS Z 8837:2018 Determination of density by volumetric displacement -- Skeleton density by gas pycnometry
JIS H 7308:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
JIS H 7304:2002 Superconductivity -- Part 5: Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
JIS H 7304:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
JIS H 7308:2006 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
JIS B 7525-3:2013 Hydrometer-type relative density meters
JIS H 7503:2003 Method for measurement of cavity volume fraction of superplastically deformed metallic materials
JIS Z 8830:2001 Determination of the specific surface area of powders (solids) by gas adsorption method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas phase volume

GB/T 31522-2015 Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<下标3>Sn composite superconducting wires
GB/T 22587-2008 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 32484-2016 Watch-cases and accessories.Vapour phase deposited coatings
GB/T 32484-2022 Watch case and its accessories vapor deposition coating
GB/T 22587-2017 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
GB/T 10322.9-2023 Determination of specific surface area of iron ore by Breton gas permeability method
GB/T 5275.2-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 2:Volumetric pumps
GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
GB/T 6401-1986 Micrographic method for determining area fraction of the alpha-phases using charts in ferritic-austenitic stainless steels
GB/T 2922-1982 Chemical reagents--Determination of specific surface area of solid supports used in chromatography
GB/T 18682-2002 Specifications of physical vapour deposition TiN films
GB/T 10248-1988 Gas analysis--Preparation of calibration gas mixtures--Static volumetric methods
GB/T 10248-2005 Gas analysis.Preparation of calibration gas mixtures.Static volumetric methods
GB/T 13305-1991 Austenitic stainless steels.Determination of area content of the alpha-phase.Micrographic method using standard diagrams
GB 10628-1989 Gas analysis－Determination of composition of calibration gas mixtures－Comparison methods
GB/T 10628-1989 Gas analysis--Determination of composition of calibration gas mixtures—Comparison methods
GB/T 5831-1986 Determination of trace oxygen in the gases--Colorimetric method
GB/T 5831-2011 Determination of trace oxygen in the gases. Colorimetric method
GB/T 17291-1998 Petroleum liquid and gas measurement--Standard reference conditions
GB/T 10627-1989 Gas analysis--Preparation of calibration gas mixtures--Static volumetric methods
GB/T 5275.10-2009 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 10:Permeation method
GB/T 5275.8-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 8:Diffusion method
GB/T 5275.9-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 9:Saturation method
GB/T 5275.1-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 1:Methods of calibration
GB/T 5275.6-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 6:Gritical orifices
GB/T 11107-1989 Metallic and its compound powder--Determination of specific surface and particle size by air permeating method
GB/T 5275.4-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 4:Continuous syringe injection method
GB/T 5275.5-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 5:Capillary calibration devices
GB/T 5275.11-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 11:Electrochemical generation

Korean Agency for Technology and Standards (KATS), Gas phase volume

KS A 0094-2014(2019) Determination of the specific surface area of powders(solids) by gas adsorption method
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS D 8346-2013 Aluminium vapor deposition
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS L 4008-2006 Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS L 4008-1981 Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS C IEC 61788-5-2016(2021) Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS C IEC 61788-5:2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS T 1303-2022 Determination of ratio of spatial volume to total packaging volume for commercial packaging(consumer packaging)
KS B 8300-2007 Gas meters－Conversion devices－Part 1：Volume conversion
KS B ISO 7181-2006(2011) Hydraulic fluid power－Cylinders－Bore and rod area ratios
KS L ISO 18757-2012(2017) Fine ceramics－Determination of specific surface area of ceramic powders by gas adsorption using the BET method
KS L ISO 18757-2012(2022) Fine ceramics－Determination of specific surface area of ceramic powders by gas adsorption using the BET method
KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS B 50006-2005(2020) Gas volume meters－Part 1：General provisions
KS I ISO 11461:2005 Soil quality－Determination of soil water content calculatedon a volume basis(Gravimetric method)
KS M ISO 21687:2011 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
KS M ISO 21687:2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS L 4008-2006(2016) Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS A 0082-2008 Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS A 0082-1993 Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS M 1011-1994 Nitrogen monoxide(standard reference gas)
KS M 1015-1994 Sulfur dioxide(standard reference gas)
KS C 2375-2006(2021) Analytical method of polychlorinated biphenyls(PCBs)by gas chromatography peak pattern comparison
KS F 2549-1997 Testing method for potential volume change of cement-aggregate combinations
KS M 1429-2004 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS L 3519-2017(2022) Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS M ISO 4590:2018 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS L 3519-1987 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS L 3519-1982 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS M ISO 8130-2:2008 Coating powders－Part 2：Determination of density by gas comparison pyknometer(referee method)
KS M ISO 4652:2014 Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures
KS C 2375-2006(2016) Analytical method of polychlorinated biphenyls(PCBs)by gas chromatography peak pattern comparison
KS M ISO 3993:2003 Liquefied petroleum products gas and light hydrocarbons－Determination of density or relative density－Pressure hydrometer method
KS I ISO 6145-10:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS A ISO 7589:2007 Photography－Illuminants for sensitometry－Specifications for daylight, incandescent tungsten and printer
KS I ISO 6143:2008 Gas analysis-Comparison methods for determining and checking the composition of calibration gas mixtures
KS I ISO 6143-2015(2020) Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
KS I ISO 6143:2015 Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
KS L 3519-2017 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS B 8300-2017 Gas meters — Conversion devices — Part 1: Volume conversion
KS B 8300-2018 Gas meters — Conversion devices — Part 1: Volume conversion
KS D ISO 22779:2009 Metallic coatings-Physical vapour-deposited coatings of aluminium-Specification and test methods
KS D ISO 22779:2013 Metallic coatings－Physical vapour-deposited coatings of aluminium－Specification and test methods

British Standards Institution (BSI), Gas phase volume

BS ISO 7181:1997 Hydraulic fluid power. Cylinders. Bore and rod area ratios
BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
BS EN 61788-12:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-12:2002 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-12:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-5:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2001 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
BS ISO 9277:2022 Tracked Changes. Determination of the specific surface area of solids by gas adsorption. BET method
21/30419294 DC BS ISO 9277. Determination of the specific surface area of solids by gas adsorption. BET method.
BS 6169-2:1984 Methods for volumetric measurement of liquid hydrocarbons - Turbine meter systems
BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
BS EN 12405:2002 Gas meters - Gas-volume electronic conversion devices
BS ISO 6421:2012 Hydrometry. Methods for assessment of reservoir sedimentation
BS EN 14702-1:2006(2007) Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
BS ISO 16253:2007 Watch-cases and accessories - Vapour phase deposited coatings
BS ISO 16253:2017 Watch-cases and accessories. Vapour phase deposited coatings
BS 4359-2:1982 Determination of the specific surface area of powders - Recommended air permeability methods
BS EN 12405-1:2005 Gas meters - Conversion devices - Volume conversion
BS EN 12405-1:2005+A2:2010 Gas meters. Conversion devices. Volume conversion
BS EN 12618-3:2004 Products and systems for the protection and repair of concrete structures-Test methods-Part 3:Determination of the adhesion of injection products,with or without thermal cycling-Slant shear method
BS EN 12618-2:2004 Products and systems for the protection and repair of concrete structures-Test methods-Part 2:Determination of the adhesion of injection products,with or without thermal cycling-Adhesion by tensile bond strength
BS EN 12405-1:2018 Gas meters. Conversion devices. Volume conversion
BS EN ISO 6144:2003 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
BS EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
BS EN 14702-1:2006 Characterization of Sludges. Settling Properties. Part 1: Determination of Settleability (Determination of the Proportion of Sludge Volume and Sludge Volume Index)
BS EN 14702-1:2007 Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
BS 4359-1:1996 Determination of the specific surface area of powders. BET method of gas adsorption for solids (including porous materials)
BS ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption
BS EN ISO 8130-2:2010 Coating powders. Determination of density by gas comparison pyknometer (referee method)
BS EN ISO 18757:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of specific surface area of ceramic powders by gas adsorption using the BET method
BS EN ISO 22553-4:2020 Paints and varnishes. Electro-deposition coatings - Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials
BS ISO 4652:2020 Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS EN ISO 6145-8:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Diffusion method
BS EN ISO 6145-9:2009 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
BS EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Diffusion method
BS EN ISO 6145-9:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
BS 5355:1976 Specification for filling ratios and developed pressures for liquefiable and permanent gases
BS DD ISO/TS 3716:2006 Hydrometry - Functional requirements and characteristics of suspended-sediment samplers
BS EN ISO 4590:2016 Tracked Changes. Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
BS EN ISO 6145-10:2002 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Permeation method
BS EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Permeation method
BS EN ISO 6143:2001 Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
BS EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
BS ISO 6145-2:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Volumetric pumps
BS EN ISO 8130-2:2021 Tracked Changes. Coating powders. Determination of density by gas comparison pyknometer (referee method)
BS EN ISO 18757:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method
BS EN 12405-1:2021 Tracked Changes. Gas meters. Conversion devices. Volume conversion

Taiwan Provincial Standard of the People's Republic of China, Gas phase volume

CNS 14389-1999 Methods of measuring for specific surface area of fine ceramic powders by gas adsorption
CNS 11151-1984 Method of Test for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete
CNS 2705-1971 Method for Determination of Specific Gravity of Gas Fuels
CNS 12706-1990 Method of Test for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
CNS 11027-1984 Definitions of Terms Relating to Density and Specific Gravity of Solids Liquids and Gases
CNS 8759-1987 Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens
CNS 8757-1987 Method of Test for Bulk Specific Gravity and Density of Compacted Bituminous Mixtyres Using Paraffin- Coated Specimens

Indonesia Standards, Gas phase volume

SNI 13-6661-2002 Specific surface area measurement for mineral powder by nitrogen gas adsorption
SNI 7656-2012 Tata cara pemilihan campuran untuk beton normal, beton berat dan beton massa

Association Francaise de Normalisation, Gas phase volume

NF X11-620:1996 Determination of the specific surface area of solids by gas adsorption using the bet method.
NF EN 61788-12:2014 Supraconductivité - Partie 12 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/non-cuivre des fils en composite supraconducteur Nb3Sn
NF EN 61788-5:2014 Supraconductivité - Partie 5 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/supraconducteur des fils en composite supraconducteur Cu/Nb-Ti
NF C31-888-5*NF EN 61788-5:2014 Superconductivity - Part 5 : matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
NF C31-888-12:2003 Supraconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires.
NF C31-888-12*NF EN 61788-12:2014 Superconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
NF X20-307:1977 Gas analysis by colorimetry.
NF X20-203*NF EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method.
NF EN ISO 4590:2016 Plastiques alvéolaires rigides - Détermination du pourcentage volumique de cellules ouvertes et de cellules fermées
NF E17-304-1*NF EN 12405-1:2021 Gas meters - Conversion devices - Part 1 : volume conversion
NF X20-304:1974 GAS ANALYSIS BY A CONTINUOUS COULOMETRIC METHOD.
NF X20-207:1982 Gas analysis. Determination of composition of calibration gas mixtures. Comparison methods.
NF EN 13041:2012 Amendements du sol et supports de culture - Détermination des propriétés physiques - Masse volumique apparente sèche, volume d'air, volume d'eau, valeur de rétraction et porosité totale
NF X20-220:1981 Analysis of gases. Checking of calibration gas mixtures by a comparison method.
NF EN 772-9/A1:2005 Méthodes d'essai des éléments de maçonnerie - Partie 9 : détermination du volume et du pourcentage de vides et du volume net absolu des éléments de maçonnerie en terre cuite et en silico-calcaire par remplissage de sable
NF X20-207*NF EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
NF E17-304-1:2010 Gas meters - Conversion devices - Part 1 : volume conversion.
NF E17-304-1/IN2:2010 Gas meters - Conversion devices - Part 1 : volume conversion.
NF EN 12405-1:2021 Compteurs de gaz - Dispositifs de conversion - Partie 1 : conversion de volume
NF T30-312-4*NF EN ISO 22553-4:2020 Paints and varnishes - Electro-deposition coatings - Part 4 : compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials

AENOR, Gas phase volume

UNE-ISO 9277:2009 Determination of the specific surface area of solids by gas adsorption using the BET method
UNE 77243-2:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 2: Volumetric pumps
UNE-EN ISO 6144:2007 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
UNE-EN 14702-1:2007 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
UNE-EN 12405-1:2006+A2:2011 Gas meters - Conversion devices - Part 1: Volume conversion

Natural Gas Processor's Association (NGPA), Gas phase volume

GPA RR-148-1995 Volume Correction Factors for Natural Gas Liquids Phase II
GPA STD 8173-1994 Method for Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes
GPA RR-133-1991 Volume Correction Factors for Natural Gas Liquids - Phase I

国家市场监督管理总局、中国国家标准化管理委员会, Gas phase volume

GB/T 39713-2020 Testing mothed for specific surface area of ceramic powders—BET gas adsorption operation
GB/T 36242-2018 Volume conversion device for gas meter
GB/T 40401-2021 Determination of density by volumetric displacement—Skeleton density by gas pycnometry
GB/T 11107-2018 Metallic and its compound powder—Determination of specific surface and particle size—Air permeating method

NL-NEN, Gas phase volume

NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density
NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density
NEN 6681-1981 Waste water - Volumetric determination of carbon dioxide and oxygen in gases

International Electrotechnical Commission (IEC), Gas phase volume

IEC 61788-5:2013 Superconductivity.Part 5: Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
IEC 61788-12:2013 Superconductivity.Part 12: Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<(Index)3>Sn composite superconducting wires

CENELEC - European Committee for Electrotechnical Standardization, Gas phase volume

EN 61788-12:2002 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires

KR-KS, Gas phase volume

KS C IEC 61788-5-2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS M ISO 21687-2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS M ISO 4590-2018 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS I ISO 6145-10-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS B 8300-2018(2023) Gas meters — Conversion devices — Part 1: Volume conversion

GOSTR, Gas phase volume

GOST R 57844-2017 Composites. Determination of density by volumetric displacement - skeleton density by gas pycnometry

ES-UNE, Gas phase volume

UNE-EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (Endorsed by AENOR in November of 2013.)
UNE-EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (Endorsed by AENOR in October of 2013.)
UNE-EN 772-9:1999 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
UNE-EN 772-9:1999/A1:2008 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
UNE-EN ISO 4590:2017 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
UNE 43312:1982 ERRATUM:2011 Glass hydrometers. Conventional value for the thermal cubic-expansion coefficient (for use in the preparation of measurement tables for liquids)
UNE-EN ISO 22553-4:2021 Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials (ISO 22553-4:2019)
UNE-EN 12405-1:2023 Gas meters - Conversion devices - Part 1: Volume conversion
UNE-EN 12405-1:2019 Gas meters - Conversion devices - Part 1: Volume conversion

Danish Standards Foundation, Gas phase volume

DS/EN 61788-5:2001 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
DS/EN 61788-12:2002 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
DS/EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
DS/EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
DS/EN ISO 4590:2003 Rigid cellular plastics - Determination of thevolume percentage of open cells and of closed cells
DS/EN 772-9/A1:2005 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling
DS/EN 772-9:1999 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling
DS/EN 14702-1:2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
DS/EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
DS/EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
DS/EN ISO 18757:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method
DS/EN 12405-1+A2:2011 Gas meters - Conversion devices - Part 1: Volume conversion
DS/EN 12405-1:2021 Gas meters – Conversion devices – Part 1: Volume conversion

工业和信息化部, Gas phase volume

YS/T 1031-2015 chemical vapor deposition furnace
HG/T 5997-2022 Gas phase cyclone-liquid phase jet gas purifier

European Committee for Electrotechnical Standardization（CENELEC）, Gas phase volume

EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
EN 61788-5:2001 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors

SAE - SAE International, Gas phase volume

SAE AMS03-28/1A-2017 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Aluminum for Protection Against Corrosion
SAE AMS03-28/1-2015 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Aluminum for Protection Against Corrosion
SAE AMS03-28/2A-2017 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Cadmium for Protection Against Corrosion
SAE AMS03-28/2-2015 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Cadmium for Protection Against Corrosion
SAE AMS2427B-1995 Aluminum Coating Ion Vapor Deposition
SAE AMS03-28/3A-2017 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Titanium Nitride for Surface Protection
SAE AMS03-28/3-2015 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Titanium Nitride for Surface Protection
SAE AS7109/2A-2005 Nadcap Requirements for Vapor Deposited Coatings
SAE AS7109/2B-2017 Nadcap Requirements for Vapor Deposited Coatings
SAE AMS2444-1992 Coating@ Titanium Nitride Physical Vapor Deposition

Society of Automotive Engineers (SAE), Gas phase volume

SAE AMS03/28PT1A-2017 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Aluminum for Protection Against Corrosion
SAE AMS03/28PT1-2015 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Aluminum for Protection Against Corrosion
SAE AMS2427-2011 ALUMINUM PLATING Ion Vapor Deposition
SAE AMS03/28PT2A-2017 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Cadmium for Protection Against Corrosion
SAE AMS03/28PT2-2015 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Cadmium for Protection Against Corrosion
SAE AMS2427C-2001 Aluminum Coating Ion Vapor Deposition
SAE AMS2427A-1993 ALUMINUM COATING Ion Vapor Deposition
SAE AMS2427D-2018 Aluminum Coating Ion Vapor Deposition
SAE AMS03/28PT3-2015 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Titanium Nitride for Surface Protection
SAE AMS03/28PT3A-2017 Physical Vapor Deposition of Metals: Physical Vapor Deposition of Titanium Nitride for Surface Protection
SAE AMS2444A-2019 Coating, Titanium Nitride Physical Vapor Deposition
SAE AMS2535-1984 COATING, VAPOR DEPOSITED POLY-MONOCHLORO-PARA-XYLYLENE For Microcircuits
SAE AMS2535A-1994 COATING, VAPOR DEPOSITED POLY-MONOCHLORO-PARA-XYLYLENE For Microcircuits
SAE J/ISO 6483-2003 Earth-moving machinery Dumper bodies Volumetric rating Identical to ISO 6483:1980; Superseding SAE J1364

The American Road & Transportation Builders Association, Gas phase volume

AASHTO M 323-2013 Standard Specification for Superpave Volumetric Mix Design
AASHTO T 354-2015 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
AASHTO TP 77-2014 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
AASHTO TP 77-2009 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method

AASHTO - American Association of State Highway and Transportation Officials, Gas phase volume

M 323-2007 Standard Specification for Superpave Volumetric Mix Design
M 323-2012 Standard Specification for Superpave Volumetric Mix Design
M 323-2004 Standard Specification for Superpave Volumetric Mix Design
M 323-2013 Standard Specification for Superpave Volumetric Mix Design
MP2-1999 Standard Specification for Superpave (TM) Volumetric Mix Design
MP2-1997 Standard Specification for Superpave (TM) Volumetric Mix Design
MP2-2000 Standard Specification for Superpave Volumetric Mix Design (2000 Edition)
M132-1987 Standard Specification for Terms Relating to Density and Specific Gravity of Solids@ Liquids@ and Gases (Twentieth Edition; ASTM E12-70 (1991)E1)
T 354-2015 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
TP 77-2009 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
TP 77-2014 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
MP2-2001 Standard Specification for Superpave Volumetric Mix Design (2000 Edition; Interim Edition 4/2001)

Lithuanian Standards Office , Gas phase volume

LST EN 61788-5-2002 Superconductivity. Part 5: Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors (IEC 61788-5:2000)
LST EN 61788-12-2014 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013)
LST EN 61788-12-2003 Superconductivity. Part 12: Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2002)
LST IEC 62089:2008 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters (IEC 62089:2001, identical)
LST EN ISO 6144:2007 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
LST EN 14702-1-2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
LST EN 772-9-2000 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
LST EN 772-9-2002/A1-2005 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
LST ISO 14164:2001 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method (identical ISO 14164:1999)
LST EN ISO 4590:2004 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002)
LST ISO 6883:2007 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2007, identical)
LST EN 12405-1-2005+A2-2011 Gas meters - Conversion devices - Part 1: Volume conversion

National Metrological Verification Regulations of the People's Republic of China, Gas phase volume

JJG(建材) 107-1999 Verification regulation for determination specific surface area of air permeability apparatus
JJG 633-2005 Gas Displacement Meters
JJG 184-2012 Volume of Rail Tankers for Liquefied Gases
JJG 184-1993 Verification Regulation for the Volume of Liquefied Gass Railway Tank Car

Professional Standard - Energy, Gas phase volume

NB/SH/T 0571-2021 Determination of Specific Surface Area and Micropore Volume of Zeolite in Catalyst

ES-AENOR, Gas phase volume

UNE 60-520-1988

RU-GOST R, Gas phase volume

GOST 2939-1963 Gases. Conditions for the determination of volume
GOST 33833-2016 Spirits. Gas-chromatographic method for determination of volume fraction of methanol
GOST R ISO 21687-2014 Carbonaceous materials for the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
GOST 17310-2002 Gases. Picknometric method for determination of density
GOST 17310-1986 Gases. Picknometric method for determination of density
GOST 28947-1991 Glass Hydrometers. Conventional value for tne thermal cubic expasion coefficient (for use in tne preparation of measurement table for liquids)
GOST 31596-2012 Gas tightness of equipment and apparatus for gas welding, cutting and allied processes. Permissible rates of external gas leakage and measuring procedures
GOST ISO 8130.2-2002 Coating powders. Determination of density by gas comparison pyknometer (referee method)
GOST R ISO 6144-2008 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
GOST ISO 3993-2013 Liquefied petroleum gases and light hydrocarbons. Determination of density or relative density. Pressure hydrometer method
GOST 33364-2015 Crude petroleum and liquid petroleum products. Determination of density, relative density and API gravity by hydrometer
GOST 10062-1975 Natural combustible gases. Method for determination of specific heat of combustion

American Society for Testing and Materials (ASTM), Gas phase volume

ASTM D3588-98 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D3588-98(2003) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D347-04 Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar
ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM D6093-97 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6093-97(2003) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6093-97(2011) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6093-97(2022) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D5550-94 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D5550-00 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D2421-19 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D2421-18 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D5550-23 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM UOP425-86 Surface Area, Pore Volume and Pore Diameter of Porous Substances by Nitrogen Adsorption
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D1217-93(1998) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D5550-14 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM C604-18 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D1071-83(2003) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1217-93(2003)e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM C604-18(2023) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D2799-99 Standard Test Method for Microscopical Determination of Volume Percent of Physical Components of Coal
ASTM D2799-09 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM D2421-02(2007) Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D2421-95 Standard Practice for Interconversion of Analysis of C₅ and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
ASTM D2421-01 Standard Practice for Interconversion of Analysis of C₅ and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
ASTM D2421-02 Standard Practice for Interconversion of Analysis of C₅ and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
ASTM D2421-21 Standard Practice for Interconversion of Analysis of C
ASTM D2421-21e1 Standard Practice for Interconversion of Analysis of C
ASTM D2421-13 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM C1039-85(2000) Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
ASTM D3305-94(1999)e1 Standard Practice for Sampling Small Gas Volume in a Transformer
ASTM E344-07 Terminology Relating to Thermometry and Hydrometry
ASTM D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D347-97 Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar
ASTM D1071-83(2008) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM E344-06 Terminology Relating to Thermometry and Hydrometry
ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM UOP964-11 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption

Professional Standard - Machinery, Gas phase volume

JB/T 8554-1997 Scratch test method for adhesion between vapor plating film and the base
JB/T 8806-1998 Mixer for mixed gas intended to be used in gas shielded arc welding. Technical specification

GM Europe, Gas phase volume

GME 8742-2007 Testing the Specific Volume Resistance of Elastomers, Plastics and Adhesives (English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14711.)

Association of German Mechanical Engineers, Gas phase volume

DVS 0801-1973 "Volume measurement of industrial gases for welding, cutting and allied working methods"
DVS 0801-2002 "Volume measurement of industrial gases for welding, cutting and allied working methods"
VDI 3490 Blatt 5-1980 Measurement of gases; determination of the composition of calibration gas mixtures by comparison methods
VDI 3490 Blatt 14-1994 Measurement of gases - Calibration gas mixtures - Preparation of calibration gas mixtures by volumetric static method using glass vessels

ZA-SANS, Gas phase volume

SANS 6109:1988 Volume of gas in a cartridge
SANS 5906:1978 Bulk density, bulk volume, apparent porosity, and apparent relative density of dense refractory bricks (evacuation method)

Group Standards of the People's Republic of China, Gas phase volume

T/QGCML 892-2023 Plasma Chemical Vapor Deposition Optical Fiber Preform Preparation Equipment
T/CNIA 0011-2019 SiC Coating by Vapor Deposition
T/ZJATA 0017-2023 Chemical vapor deposition (CVD) epitaxy equipment for preparing silicon carbide semiconductor materials
T/NAIA 0191-2023 Determination of pyridine in soil and sediment by gas chromatography-mass spectrometry
T/CPCIF 0140-2021 Catalyst carrier— Determination of surface area and pore volume for quasi-thin-water aluminit— Nitrogen adsorption method

IN-BIS, Gas phase volume

Standard Association of Australia （SAA）, Gas phase volume

AS 1580.301.2:1990(R2013)
AS 1580.202.3:2005 Paints and related materials - Methods of test - Determination of specific gravity of liquids by hydrometer

SE-SIS, Gas phase volume

SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio

Professional Standard - Building Materials, Gas phase volume

JC/T 995-2006 Zirconia powder with low specific surface area and better sinter ability
JC/T 2243-2014 Quartz tube covered in a film for PECVD

CZ-CSN, Gas phase volume

CSN 38 5549-1973 Determination of the odour capacity of fuel gases
CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities
CSN ISO 6144:1993 Gas analysis. Preparation of calibration gas mixtures. Static volumetric methods
CSN 38 5553-1988 Checking of calibration gas mixture proportion by a comparative method
CSN 38 5552-1987 Gaseous fuels Determination of composition of calibration gas mixture by comparison method

International Federation of Trucks and Engines, Gas phase volume

NAVISTAR CEMS D-32-2013 Decorative Pressure Vapor Deposition (PVD) - Plastics

Professional Standard - Agriculture, Gas phase volume

GB 2922-1982 Test method for specific surface area of chromatographic carrier for chemical reagents

PL-PKN, Gas phase volume

PN C04003-1973 Determination ol densi?y (specific grayi?y) of gases
PN M73208-1987 Hydraulic fluid power Cylinders φ values for piston working area ratios
PN-EN ISO 22553-3-2021-06 E Paints and varnishes--Electro-deposition coatings--Part 3: Compatibility of electro-deposition coating materials with a reference oil (ISO 22553-3:2019)
PN BN 6110-23-1967

Professional Standard - Electron, Gas phase volume

SJ 20984-2008 General specification for chemical vapor deposition (CVD) equipment
SJ 20897-2003 Specification for coating process of poly-para-xylylene vapour deposition
SJ/T 10311-1992 Generic specification of low Pressure Chemical vapor Deposition system
SJ/T 11829.1-2022 Plasma enhanced chemical vapor deposition (PECVD) equipment for crystalline silicon photovoltaic cells Part 1: Tubular PECVD equipment
SJ/T 11829.2-2022 Plasma enhanced chemical vapor deposition (PECVD) equipment for crystalline silicon photovoltaic cells Part 2: Plate PECVD equipment

US-FCR, Gas phase volume

FCR COE SL-96-15 REPORT 2-1996 WORKABLITY OF MASS CONCRETE REPORT 2, SUPPLEMENTAL PROPORTIONING PARAMETERS

(U.S.) Ford Automotive Standards, Gas phase volume

FORD FLTM BP 010-1-2001 DETERMINATION OF PERCENT VOLUME CHANGE IN BUNA "N" RUBBER AFTER OIL IMMERSION
FORD FLTM BP 010-01-2001 DETERMINATION OF PERCENT VOLUME CHANGE IN BUNA"N" RUBBER AFTER OIL IMMERSION

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Gas phase volume

ASHRAE 4406-2000 Computer Analysis and Comparison of Experimental Data for Moisture Accumulation in Concrete Masonry Walls

未注明发布机构, Gas phase volume

BS EN 772-9:1998(2005) Methods of test for masonry units — Part 9 : Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
BS EN ISO 6143:2006(2007) Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures

HU-MSZT, Gas phase volume

European Committee for Standardization (CEN), Gas phase volume

EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
EN ISO 22553-4:2020 Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials (ISO 22553-4:2019)

CU-NC, Gas phase volume

NC 82-11-1985 Fermentatlon Industry. "Torula" Dried Fodder Yeast. Determination of Bulk Specific Gravity
NC 54-279-1984 Construction Materials and Producis. Calcium Oxide and Calcium Hydrale Volumetric Determination of their Useful Percentage

CN-STDBOOK, Gas phase volume

图书 A-4762 Gas flowmeter volume corrector and gas precession vortex flowmeter

Professional Standard - Light Industry, Gas phase volume

QB/T 1642-2012 Test method for apparent porosity and bulk density of ceramic body
QB/T 1642-1992 Test method for apparent porosity and bulk density of ceramic body

PT-IPQ, Gas phase volume

E 209-1967
NP EN 12078-2000 Zero governors for gas burners and gas burning appliances

API - American Petroleum Institute, Gas phase volume

API MPMS 11.1 VOL V-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume V Table 23B - Generalized Products Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24B - Generalized Products Correction of Volume
API PUBL 4540-1992 Area and Volume Source Air Quality Model Performance Evaluation Phase II Final Report

BE-NBN, Gas phase volume

NBN T 97-110-1983 Gas analysis - Preparation of calibration gas mixtures - Static volumetric methods
NBN I-1008-1969
NBN-EN 318-1994
NBN T 97-109-1984 Gas analysis - Determination of composition of calibration gas mixtures -Comparison methods
NBN D 51-003-1977
NBN D 51-003-1997
NBN D 51-003-1993

American National Standards Institute （ANSI), Gas phase volume

ANSI/ASTM C1039:2000 Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

国家能源局, Gas phase volume

SY/T 7359-2017 Method for determination of rare gas isotope ratios
SY/T 6660-2021 Measuring natural gas flow with a rotary positive displacement gas flow meter

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Gas phase volume

ASHRAE LO-09-080-2009 VFD Application for Constant Volume Air-Handling Units

National Metrological Technical Specifications of the People's Republic of China, Gas phase volume

JJF(京) 53-2018 Calibration specification for gas flowmeter volume corrector
JJF(京)53-2018 Calibration specification for gas flowmeter volume corrector

Professional Standard - Electricity, Gas phase volume

DL/T 1985-2019 Detection method of mixing ratio of sulfur hexafluoride mixed insulating gas

Professional Standard - Petroleum, Gas phase volume

SY/T 6660-2006 Measurement of natural gas flow by rotary displacement gas meters
SY 6660-2006 Measuring Natural Gas Flow with Rotary Positive Displacement Gas Flow Meters
SY/T 5779-2008 Analytical method of hydrocarbons in petroleum and sediment by gas chromatography
SY 5779-2008 Gas Chromatographic Analysis Method for Petroleum and Sedimentary Organic Matter Hydrocarbons

ACI - American Concrete Institute, Gas phase volume

ACI 211.1-1991 Standard Practice for Selecting Proportions for Normal@ Heavyweight@ and Mass Concrete

IT-UNI, Gas phase volume

UNI EN ISO 22553-4:2021 Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials

Professional Standard - Environmental Protection, Gas phase volume

HJ 922-2017 Determination of polychlorinated biphenyls in soil and sediment by gas chromatography
HJ 703-2014 Soil and sediment.Determination of phenolic compounds.Gas chromatography
HJ 921-2017 Determination of organochlorine pesticides in soil and sediment by gas chromatography

Compressed Gas Association (U.S.), Gas phase volume

CGA E-16-2008 Compressed gas check valves up to 3000 PSIG

ESDU - Engineering Sciences Data Unit, Gas phase volume

AERO 00.01.08 A-1982 Specific heat capacities and their ratio as functions of temperature for several common gases.

CEN - European Committee for Standardization, Gas phase volume

PREN 12405-1-2019 Gas meters - Conversion devices - Part 1: Volume conversion
PREN 12045-1-2017 Gas meters - Conversion devices - Part 1: Volume conversion

Universal Oil Products Company (UOP), Gas phase volume

UOP 964-2011 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption