ZH
RU
ES

Compression Performance Standard Sample

Compression Performance Standard Sample, Total:170 items.

In the international standard classification, Compression Performance Standard Sample involves: Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Raw materials for rubber and plastics, Rubber, Plastics, Aerospace fluid systems and components, Seals, glands, Construction materials, Reinforced plastics, Cellular materials, Equipment for the metallurgical industry, Rubber and plastics products, Internal combustion engines for road vehicles, Farming and forestry, General methods of tests and analysis for food products, Air quality, Mechanical testing, Adhesives, Ceramics, Refractories, Wood, sawlogs and sawn timber, Metrology and measurement in general, Products of the textile industry, Protection against fire, Fuels, Cases. Boxes. Crates, Electricity. Magnetism. Electrical and magnetic measurements, Components for electrical equipment, Measurement of volume, mass, density, viscosity, Wood-based panels, Road engineering, Open systems interconnection (OSI), Tobacco, tobacco products and related equipment, Paper and board.

UY-UNIT, Compression Performance Standard Sample

NORMA 25-1948

American Society for Testing and Materials (ASTM), Compression Performance Standard Sample

ASTM D5520-94(2001) Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
ASTM D5520-94(2006)e1 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
ASTM D3148-02 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
ASTM D3148-96 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
ASTM D3493-20 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
ASTM D575-91(1996) Standard Test Methods for Rubber Properties in Compression
ASTM D575-91(2018) Standard Test Methods for Rubber Properties in Compression
ASTM D695-02a Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D5520-94 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
ASTM D5520-18 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
ASTM D5520-11 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
ASTM D3493-19 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
ASTM D3493-06e1 Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN)
ASTM D3493-06 Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN)
ASTM D3493-18 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
ASTM D3493-19a Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
ASTM D3493-01 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample
ASTM D3493-21 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
ASTM D3493-18a Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
ASTM F309-04(2018) Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
ASTM F309-70(1996) Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
ASTM F309-18 Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
ASTM D3493-14 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
ASTM D3493-16 Standard Test Method for Carbon Black&x2014;Oil Absorption Number of Compressed Sample (COAN)
ASTM D695-15 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D695-23 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM F2837-11(2018) Standard Test Method for Hot Compression Properties of Gasket Materials
ASTM C165-95 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM C365-03 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
ASTM D5024-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
ASTM D1621-94 Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM D1621-04 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics
ASTM D5024-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
ASTM D5024-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
ASTM C365/C365M-22 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
ASTM D1621-16(2023) Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM C165-07 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM D1621-16 Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM D5224-00 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM D5224-12(2019) Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM C1856/C1856M-17 Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
ASTM D1621-04a Standard Test Method for Compressive Properties Of Rigid Cellular Plastics
ASTM D395-16e1 Standard Test Methods for Rubber Property—Compression Set
ASTM D6108-18 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
ASTM D6108-19 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
ASTM D5407-95(2000) Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement
ASTM D4703-00 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D4703-93 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D4703-07 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D4703-02 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D4703-10a Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D4703-03 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM D1229-87(1997)e1 Standard Test Method for Rubber Property-Compression Set at Low Temperatures
ASTM D1229-03(2019) Standard Test Method for Rubber Property—Compression Set at Low Temperatures
ASTM D6454/D6454M-99(2021) Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
ASTM D945-22 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D6364-06(2018) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
ASTM D623-07 Standard Test Methods for Rubber Property8212;Heat Generation and Flexing Fatigue In Compression
ASTM D6061-01 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
ASTM D6061-96 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
ASTM D6061-01(2007)e1 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
ASTM D6061-01(2012)e1 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
ASTM D623-07(2019)e1 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
ASTM E1012-05 Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D6641/D6641M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D6641/D6641M-16e2 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D6641/D6641M-16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D623-99e1 Standard Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression
ASTM D623-99 Standard Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression
ASTM D905-08 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D905-08(2021) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM C1323-96(2001)e1 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM C1323-96(2001) Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM C1323-10 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM D623-07(2019) Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
ASTM D5449/D5449M-93(2000) Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5449/D5449M-93 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5449/D5449M-93(2006) Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5449/D5449M-16 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM C975-87(2004) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
ASTM C975-87(2009) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
ASTM D905-08e1 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D905-08(2013) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D6528-00 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
ASTM D5083-10e1 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM C973-87(2009) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
ASTM C1323-96 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM D7137/D7137M-05e1 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D5467-97 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D5449/D5449M-22 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D7137/D7137M-17 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D2293-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM C973-87(2015) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
ASTM D6571-01e1 Standard Test Method for Determination of Compression Resistance and Recovery Properties of Highloft Nonwoven Fabric Using Static Force Loading
ASTM D6571-22 Standard Test Method for Determination of Compression Resistance and Recovery Properties of Highloft Nonwoven Fabric Using Static Force Loading
ASTM D3410/D3410M-03 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3410/D3410M-95 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D5467/D5467M-97e1 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D5467/D5467M-97(2017) Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM D3410/D3410M-16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D6049-03(2008) Standard Test Method for Rubber Property-Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM D6049-96 Standard Test Method for Rubber Property--Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM D604-91(1996)e1 Standard test method for rubber properties - Measurement of viscous and elastic properties of unvulcanized raw rubber and rubber compounds by compression between parallel plates
ASTM D6818-21 Standard Test Method for Tensile Properties of Rolled Erosion Control Products
ASTM D6818-18 Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products
ASTM D6818-18a Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products
ASTM D6818-17 Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products
ASTM D6571-00 Standard Test Method for Determination of Compression Resistance and Recovery Properties of Highloft Nonwoven Fabric Using Static Force Loading
ASTM D6571-01 Standard Test Method for Determination of Compression Resistance and Recovery Properties of Highloft Nonwoven Fabric Using Static Force Loading
ASTM E3331-22 Standard Test Method for Measuring Target Modulus Using the Light Weight Deflectometer on Laboratory Compaction Characteristic Samples
ASTM E1412-07 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM D7448-09 Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
ASTM D5449/D5449M-11 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D7451-08 adjunct Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels
ASTM D7451-21 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels
ASTM D7451-08 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D7030-04(2022) Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
ASTM D6049-03(2013) Standard Test Method for Rubber Propertymdash;Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM A927/A927M-99 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM A697/A697M-13(2018) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
ASTM A927/A927M-18(2022) Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM D6035/D6035M-13 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
ASTM D7030-04 Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
ASTM D7030-04(2009) Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
ASTM D7030-04(2017) Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
ASTM E2977-15(2023) Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
ASTM D3410/D3410M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D6049-03(2017) Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM D7012-04 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM E2977-15 Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
ASTM E1412-00 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM D8131/D8131M-17 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
ASTM D3387-11 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
ASTM G223-23 Standard Test Method for Measuring Friction and Adhesive Wear Properties of Lubricated and Nonlubricated Materials Using the Twist Compression Test (TCT)
ASTM D2065-03(2017) Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
ASTM D6049-03(2022) Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM D7012-13 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM D6459-19 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
ASTM D6925-08 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D6925-15 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
ASTM D8009-15 Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
ASTM D7229-08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D722-93(2007) Standard Test Method for Grease Resistance of Paper

AASHTO - American Association of State Highway and Transportation Officials, Compression Performance Standard Sample

PP 95-2018 Standard Specification for Preparation of Indirect Tension Performance Test Specimens
PP 60-2014 Standard Practice for Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC)
PP 60-2013 Standard Practice for Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC)
PP 60-2009 Standard Practice for Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC)

Society of Automotive Engineers (SAE), Compression Performance Standard Sample

SAE J1312-1990 Procedure for Mapping Engine Performance - Spark Ignition and Compression Ignition Engines, Standard;

SAE - SAE International, Compression Performance Standard Sample

SAE J1312-1980 Procedure for Measuring Basic Highway Vehicle Engine Performance and Fuel Consumption-Spark Ignition and Diesel
SAE J1312-1987 Procedure for Mapping Engine Performance Diesel and Spark Ignition Engines
SAE J1312-1995 Procedure for Mapping Engine Performance - Spark Ignition and Compression Ignition Engines@ Standard;

European Committee for Standardization (CEN), Compression Performance Standard Sample

EN 13804:2002 Foodstuffs - Determination of Trace Elements - Performance Criteria, General Considerations and Sample Preparation

RU-GOST R, Compression Performance Standard Sample

GOST EN 13804-2013 Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation
GOST R 8.824-2013 State system for ensuring the uniformity of measurements. General requirements for the competence of reference material producers

Lithuanian Standards Office , Compression Performance Standard Sample

LST EN 13804-2002 Foodstuffs - Determination of trace elements - Performance criteria, general considerations and sample preparation

British Standards Institution (BSI), Compression Performance Standard Sample

BS ISO 13061-5:2020 Physical and mechanical properties of wood. Test methods for small clear wood specimens - Determination of strength in compression perpendicular to grain

ES-UNE, Compression Performance Standard Sample

UNE-EN 1894:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens (Endorsed by AENOR in June of 2005.)

The American Road & Transportation Builders Association, Compression Performance Standard Sample

AASHTO PP 60-2013 Standard Practice for Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC)
AASHTO PP 60-2014 Standard Practice for Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC)

US-CFR-file, Compression Performance Standard Sample

CFR 40-60.5380-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5380:What standards apply to centrifugal compressor affected facilities?

Association Francaise de Normalisation, Compression Performance Standard Sample

NF EN 658-4:2003 Céramiques techniques avancées - Propriétés techniques des céramiques composites à température ambiante - Partie 4 : détermination de la résistance au cisaillement interlaminaire par compression d'éprouvettes entaillées
NF B40-331*NF EN 993-9:1997 Methods of testing for dense shaped refractory products. Part 9 : determination of creep in compression.
NF P98-230-2:1993 Test relating to pavements. Preparation of materials bound with cementitious binders or aggregates mixtes. Part 2 : preparation by static compression of sands or fine grained soils specimens.
NF V37-021:2011 Tobacco and tobacco products - Draw resistance of cigarettes and pressure drop of filter rods - Standard conditions and measurement.

TH-TISI, Compression Performance Standard Sample

TIS 121.16-2010 Standard test methods for textiles.part 16: tensile properties of fabrics.determination of maximum force using the grab method

Japanese Industrial Standards Committee (JISC), Compression Performance Standard Sample

JIS X 5270-3:1997 Information technology -- High-Performance Parallel Interface -- Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Unit (HIPPI-LE)

(U.S.) Ford Automotive Standards, Compression Performance Standard Sample

FORD WSS-M2D463-A2-2009 HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) SUPERIOR COMPRESSION SET, REFRIGERANT AND OIL RESISTANT O-RINGS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSH-M2D463-A)