ZH
RU
ES

DC contactor design

DC contactor design, Total:204 items.

In the international standard classification, DC contactor design involves: Switchgear and controlgear, Electrical accessories, Shipbuilding and marine structures in general, Electric traction equipment, Components for electrical equipment, Body care equipment, Components and accessories for telecommunications equipment, Power transmission and distribution networks, Electrical engineering in general, Aerospace electric equipment and systems, Rectifiers. Convertors. Stabilized power supply, Fluid storage devices, Iron and steel products, Printed circuits and boards, Medical equipment, Electricity. Magnetism. Electrical and magnetic measurements, Electric filters, Electric road vehicles, Electromechanical components for electronic and telecommunications equipment, Aircraft and space vehicles in general, Road vehicle systems, Linear and angular measurements.


Group Standards of the People's Republic of China, DC contactor design

ES-UNE, DC contactor design

  • IEEE 1833-2023 IEEE Guide for Design of Direct Current Overhead Contact Systems for Transit Systems
  • UNE-EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (Endorsed by Asociación Española de Normalización in July of 2021.)
  • UNE-EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c. (Endorsed by AENOR in March of 2007.)
  • UNE-EN IEC 62196-3:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
  • UNE-EN IEC 62196-6:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where p...

Professional Standard - Railway, DC contactor design

国家能源局, DC contactor design

Professional Standard - Machinery, DC contactor design

  • JB/T 11309-2013 Technical condition of traction D.C. electro-pneumatic contactor & electromagnetic contactor

United States Navy, DC contactor design

Institute of Electrical and Electronics Engineers (IEEE), DC contactor design

  • IEEE P1833 IEEE Approved Draft Guidelines for the Design of Direct Current Overhead Contact Systems for Transit Systems
  • IEEE P1833/D2, December 2022 IEEE Approved Draft Guidelines for the Design of Direct Current Overhead Contact Systems for Transit Systems
  • IEEE P1833/D1, November 2022 IEEE Draft Guidelines for the Design of Direct Current Overhead Contact Systems for Transit Systems
  • IEEE P1627/D1.5, March 2012 IEEE Draft Standard for Grounding Practices for dc Electrification Overhead Contact Systems, Including Application of Lightning Arresters, for Transit Systems

Association Francaise de Normalisation, DC contactor design

  • NF L54-555:1979 Connecteurs d'aérodrome avec contacts mâles de diamètres 11 mm - 28 volts - Tension continue
  • NF ISO 3533:2022 Sex toys - Exigences relatives à la conception et à la sécurité des produits destinés à être mis en contact direct avec les organes génitaux, l'anus ou les deux
  • NF S58-001*NF ISO 3533:2022 Sex toys - Design and safety requirements for products in direct contact with genitalia, the anus, or both
  • NF EN IEC 62271-106:2021 Appareillage à haute tension - Partie 106 : contacteurs, combinés de démarrage à contacteurs et démarreurs de moteurs, pour courant alternatif
  • NF C64-471-106*NF EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106 : alternating current contactors, contactor-based controllers and motor-starters
  • NF C64-120:1991 Appareillage à haute tension pour courant alternatif - Déclencheurs directs à maximum de courant - Règles.
  • NF C64-471-106*NF EN 62271-106:2012 High-voltage switchgear and controlgear - Part 106 : alternating current contactors, contactor-based controllers and motor-starters.
  • NF C64-150:1985 A.C. high-voltage switchgear and controlgear. High-voltage alternating current contactors.
  • NF E86-200-3:2009 Unfired pressure vessels - Part 3 : design.
  • NF E86-200-3:2014 Unfired pressure vessels - Part 3 : design
  • NF L58-100-306*NF EN 2349-306:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 306 : overload d.c. and a.c.
  • NF EN 2349-306:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 306 : surcharges courant continu et alternatif
  • NF EN 60947-4-3:2014 Appareillage à basse tension - Partie 4-3 : contacteurs et démarreurs de moteurs - Gradateurs et contacteurs à semiconducteurs pour charges, autres que des moteurs, à courant alternatif
  • NF F41-020-4/A1*NF EN 50123-4/A1:2014 Railway applications - Fixed installations - D.C. switchgear - Part 4 : outdoor d.c. disconnectors, switch-disconnectors and earthing switches
  • NF S93-123-14*NF EN ISO 8536-14:2018 Infusion equipment for medical use - Part 14 : clamps and flow regulators for transfusion and infusion equipment without fluid contact
  • NF C63-396-3*NF EN 62196-3:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3 : dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
  • NF C63-113:2000 Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads.
  • NF S93-123-13*NF EN ISO 8536-13:2016 Infusion equipment for medical use - Part 13 : graduated flow regulators for single use with fluid contact
  • NF F41-020-3/A1*NF EN 50123-3/A1:2014 Railway applications - Fixed installations - D.C. switchgear - Part 3 : indoor d.c. disconnectors, switch-disconnectors and earthing switches
  • NF F41-020-3*NF EN 50123-3:2004 Railway applications - Fixed installations - D.C. switchgear - Part 3 : indoor d.c. disconnectors, switch-disconnectors and earthing switches
  • NF EN ISO 8536-13:2016 Matériel de perfusion à usage médical - Partie 13 : régulateurs de débit gradués non réutilisables avec contact à fluide
  • NF C93-400-2-2*NF EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2 : electrical continuity and contact resistance tests - Test 2b : contact resistance - Specified test current method.
  • NF C99-133-1*NF EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1 : requirements for measuring instruments
  • NF EN 60947-4-2:2012 Appareillage à basse tension - Partie 4-2 : contacteurs et démarreurs de moteurs - Gradateurs et démarreurs à semiconducteurs de moteurs à courant alternatif

Aerospace Industries Association/ANSI Aerospace Standards, DC contactor design

  • AIA/NAS NAS 405-1961 Receptacle - External Power Connection Direct Current, Design and Installation of (for Aircraft) (Rev. 2)

U.S. Air Force, DC contactor design

National Metrological Technical Specifications of the People's Republic of China, DC contactor design

  • JJF 1261.18-2017 Measurement and testing rules for energy efficiency of AC contactors
  • JJF 1261.18-2015 Rules of Metrology Testing for Energy Efficiency Label of AC Contactors

British Standards Institution (BSI), DC contactor design

  • BS EN 62271-106:2011 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
  • PD IEC TR 63127:2019 Guideline for the system design of HVDC converter stations with line-commutated converters
  • 21/30404480 DC BS ISO 3533. Sex toys. Design and safety requirements for products in direct contact with genitalia, the anus, or both
  • BS 5424-3:1988 Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c.. Additional requirements for contactors subject to certification
  • BS EN IEC 62271-213:2021 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
  • BS EN IEC 62271-106:2021 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
  • BS 2G 202:1988 Specification for design and performance requirements for airframe-fit electrical connectors for d.c. and low frequency a.c. applications
  • BS PD IEC/TR 62001-4:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Equipment
  • PD IEC TR 62001-4:2021 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Equipment
  • PD IEC TS 62344:2022 Tracked Changes. Design of earth electrode stations for high-voltage direct current (HVDC) links. General guidelines
  • BS EN 60947-4-3:2000+A2:2011 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
  • BS EN 60947-4-3:2014 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
  • BS EN 2349-306:2007 Aerospace series - Requirements and test procedures for relays and contactors - Overload d.c and a.c
  • BS EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
  • BS EN ISO 8536-14:2018 Infusion equipment for medical use - Clamps and flow regulators for transfusion and infusion equipment without fluid contact
  • BS PD IEC TR 62001-1:2021 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Overview
  • BS EN 50123-4:1999 Railway applications - Fixed installations - d.c. switchgear - Outdoor d.c. in-line switch-disconnectors, disconnectors and d.c. earthing switches
  • BS PD IEC/TR 62001-1:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Overview
  • BS PD IEC/TR 62001-2:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Performance
  • BS PD IEC/TR 62001-3:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Modelling
  • PD IEC TR 62001-1:2021 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Overview
  • PD IEC/TR 62001-2:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Performance
  • PD IEC/TR 62001-3:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Modelling
  • BS EN IEC 62196-6:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles - Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where…
  • BS PD IEC TR 62001-4:2021 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Equipment
  • 18/30378901 DC BS EN 62271-106. High-voltage switchgear and controlgear. Part 106. Alternating current contactors; contactor-based controllers and motor-starters
  • BS EN 60947-5-6:2001 Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. DC interface for proximity sensors and switching amplifiers (NAMUR). DC interface for proximity sensors and switching amplifiers (NAMUR)
  • BS EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2b - Contact resistance - Specified test current method
  • BS EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings. Requirements for measuring instruments
  • 18/30356862 DC BS EN 62196-3. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 3. Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
  • 19/30395303 DC BS EN 62196-3. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 3. Dimensional compatibility and interchangeability requirements for DC and AC/DC pin and contact-tube vehicle couplers
  • 19/30377490 DC BS EN 62196-6. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 6. Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers for DC EV supply equipment where protecti...
  • BS EN 60947-4-2:2012 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor motor controllers and starters
  • BS EN 61076-3-120:2016 Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A

Standard Association of Australia （SAA）, DC contactor design

International Organization for Standardization (ISO), DC contactor design

  • ISO 3533:2021 Sex toys — Design and safety requirements for products in direct contact with genitalia, the anus, or both
  • ISO 8536-14:2016 Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
  • ISO 8536-13:2016 Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact
  • ISO/DIS 25178-601:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Design and characteristics of contact (stylus) instruments

AR-IRAM, DC contactor design

American National Standards Institute （ANSI), DC contactor design

  • ANSI/SCTE 103-2012 Test Method for DC Contact Resistance, Drop cable to ôF connectors and F 81 Barrels
  • ANSI/IEEE 1204:1997 Guide for Planning DC Links Terminating at AC Locations Having Low Short-Circuit Capacities, Part I: AC/DC Interaction Phenomena, Part II: Planning Guide

Korean Agency for Technology and Standards (KATS), DC contactor design

  • KS C IEC TR 63127:2022 Guideline for the system design of HVDC converter stations with line-commutated converters
  • KS C IEC 60947-4-3-2012(2022) Low-voltage switchgear and controlgear－Part 4-3：Contactors and motor-starters－AC semiconductor controllers and contactors for non-motor loads
  • KS C IEC 60947-4-3-2012(2017) Low-voltage switchgear and controlgear－Part 4-3：Contactors and motor-starters－AC semiconductor controllers and contactors for non-motor loads
  • KS C IEC 62019:2003 Electrical accessories－Circuit－breakers and similar equipment for household use－Auxiliary contact units
  • KS R IEC 62196-3-2017(2022) Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. p
  • KS P ISO 8536-13:2018 Infusion equipment for medical use ─ Part 13: Graduated flow regulators for single use with fluid contact
  • KS C IEC 60512-2-2:2009 Connectors for electronic equipment-Tests and measurements-Part 2-2:Electrical continuity and contact resistance tests-Test 2b:Contact resistance-Specified test current method
  • KS C IEC 60512-2-2:2014 Connectors for electronic equipment－Tests and measurements－Part 2-2：Electrical continuity and contact resistance tests－Test 2b：Contact resistance－Specified test current method

KR-KS, DC contactor design

  • KS C IEC TR 63127-2022 Guideline for the system design of HVDC converter stations with line-commutated converters
  • KS P ISO 8536-13-2018 Infusion equipment for medical use ─ Part 13: Graduated flow regulators for single use with fluid contact
  • KS C IEC 60512-2-2-2009 Connectors for electronic equipment－Tests and measurements－Part 2-2：Electrical continuity and contact resistance tests－Test 2b：Contact resistance－Specified test current method

PL-PKN, DC contactor design

  • PN E06077-1991 Power convertors for electric traction. Direct d.c. convertors (d.c. chopper convertors) for rolling stock
  • PN-EN IEC 62271-106-2021-09 E High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2021)

Professional Standard - Electricity, DC contactor design

  • DL/T 5393-2007 Design regdadon of content and profundity for high voltage direct current converter station connecting to the system

Professional Standard - Energy, DC contactor design

  • DL/T 5393-2023 In-depth regulations on design content of HVDC converter station access system

European Committee for Electrotechnical Standardization（CENELEC）, DC contactor design

  • EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
  • EN 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
  • EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
  • EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
  • EN 50123-4:2003 Railway applications - Fixed installations - D.C. switchgear Part 4: Outdoor d.c. disconnectors, switch-disconnectors and earthing switches (Incorporates Amendment A1: 2013)
  • EN 60947-4-3:2000 Low-Voltage Switchgear and Controlgear Part 4.3: Contactors and Motor-Starters AC Semiconductor Controllers and Contactors for Non-Motor Loads Incorproates Amendment A1: December 2006 [: CENELEC HD 419.2 S1]

Danish Standards Foundation, DC contactor design

  • DS/EN IEC 62271-106:2021 High-voltage switchgear and controlgear – Part 106: Alternating current contactors, contactor-based controllers and motor-starters
  • DS/EN 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
  • DS/EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
  • DS/EN 60947-4-3/A2:2011 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
  • DS/EN 60947-4-3/A1:2007 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
  • DS/EN 60947-4-3:2001 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

AENOR, DC contactor design

  • UNE-EN 62271-106:2012 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
  • UNE-EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
  • UNE-EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers

International Electrotechnical Commission (IEC), DC contactor design

  • IEC 60947-4-3:2007 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
  • IEC 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
  • IEC TS 62344:2013 Design of earth electrode stations for high-voltage direct current (HVDC) links - General guidelines
  • IEC 62271-106:2011/COR1:2014 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters; Corrigendum 1
  • IEC TS 62344:2022 Design of earth electrode stations for high-voltage direct current (HVDC) links - General guidelines
  • IEC 60947-4-3:2011 Low-voltage switchgear and controlgear. Part 4-3: Contactors and motor-starters.AC semiconductor controllers and contactors for non-motor loads
  • IEC TR 62001-4:2016 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 4: Equipment
  • IEC TR 62001-4:2021 RLV High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 4: Equipment
  • IEC TR 62001-4:2021 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 4: Equipment
  • IEC 60947-4-3:1999 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
  • IEC 60947-4-3/COR1:2000 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads; Corrigendum 1
  • IEC TR 62001:2009 High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of AC filters
  • IEC 62196-3:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle c
  • IEC PAS 62344:2007 General guidelines for the design of ground electrodes for high-voltage direct current (HVDC) links (NPPAS)
  • IEC TR 62001-1:2021 RLV High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 1: Overview
  • IEC 115/53/DTS:2012 IEC/TS 62344, Ed. 1: General guidelines for the design of earth electrode stations for high-voltage direct current (HVDC) links
  • IEC 60947-4-2:2007 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
  • IEC TR 62001-1:2016 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 1: Overview
  • IEC TR 62001-3:2016 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 3: Modelling
  • IEC TR 62001-2:2016 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 2: Performance
  • IEC TR 62001-1:2021 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 1: Overview
  • IEC 61557-17:2021 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 17: Non-contact AC voltage indicato
  • IEC 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests; Test 2b: Contact resistance; Specified test current method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, DC contactor design

  • GB/T 24975.4-2010 Guide of environmental design for low-voltage apparatus-Part 4:Contact
  • GB/T 14048.12-2006 Low voltage switchgear and controlgear Part 4-3: Contactors and motor starters AC semiconductor controllers and contactors for non motor loads
  • GB/T 14048.12-2016 Low-voltage switchgear and controlgear Part 4-3: Contactors and motor starters for AC semiconductor controllers and contactors for non-motor loads

US-UFC, DC contactor design

未注明发布机构, DC contactor design

  • BS 2G 202:1988(1999) Specification for Design and performance requirements for airframe - fit electrical connectors for D.C. and low frequency A.C. applications

Lithuanian Standards Office , DC contactor design

  • LST EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2021)
  • LST EN 62271-106-2012 High-voltage switchgear and controlgear -- Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2011)
  • LST EN 2349-306-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
  • LST EN 60947-4-3-2000/A1-2007 Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999/A1:2006)
  • LST EN 60947-4-3-2000/A2-2011 Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999/A2:2011)
  • LST EN 60947-4-3-2000 Low-voltage swichgear and controlgear. Part 4: Contactors and motor-starters. Section 3: AC semiconductor controllers and contactors for non-motor load (IEC 60947-4-3:1999)

European Committee for Standardization (CEN), DC contactor design

  • EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
  • EN ISO 8536-14:2018 Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
  • EN ISO 8536-13:2016 Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016)

SE-SIS, DC contactor design

  • SIS SS EN 50 012-1989 Low-voltage switchgear and controlgear for industrial use — Terminal marking and distinctive number for auxiliary contacts ofparticular contactors
  • SIS SS IEC 485:1981 Electronic measuring equipment — Digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital converters
  • SIS SS 428 91 06-1982 Portable two-pole voltage testers for 110-440 V a.c. and de. - Design and testing

NEMA - National Electrical Manufacturers Association, DC contactor design

  • NEMA ICS 2-1993 Industrial Control and Systems Controllers@ Contactors@ and Overload Relays Rated Not More Than 2000 Volts AC or 750 Volts DC
  • NEMA ICS 2.8-1996 CONTROLLERS@ CONTACTORS@ AND OVERLOAD RELAYS RATED NOT MORE THAN 2000 VOLTS AC OR 750 VOLTS DC@ PART 8: DISCONNECT DEVICES FOR USE IN INDUSTRIAL CONTROL EQUIPMENT (***ICS 2.8 was Incorporated into ICS 2***)

German Institute for Standardization, DC contactor design

  • DIN EN 2349-306:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006
  • DIN EN 2349-306:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006
  • DIN 89266:1993 Double-pole cable couplings with earthing contact, 10 A d.c., 16 A a.c., 250 V, degree of protection provided by enclosure IP 56
  • DIN IEC/TR 62001-4:2022-12 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 4: Equipment (IEC TR 62001-4:2021)
  • DIN EN ISO 8536-14:2018-04 Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact (ISO 8536-14:2016); German version EN ISO 8536-14:2018
  • DIN EN 62271-106:2012 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2011); German version EN 62271-106:2011
  • DIN EN 60947-4-3:2007 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999 + A1:2006); German version EN 60947-4-3:2000 + A1:2006
  • DIN EN 62196-3:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers (IEC 62196-3:2014)
  • DIN EN 60512-2-2:2004 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method (IEC 60512-2-2:2003); German version EN 60512-2-2:2003
  • DIN EN 60947-4-3:2015 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:2014); German version EN 60947-4-3:2014

RU-GOST R, DC contactor design

  • GOST IEC 60947-4-3-2014 Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor starters. AC semiconductor controllers and contactors for non-motor loads
  • GOST R 56130-2014 Integrated logistic support of exporting military products. Calculation of direct maintenance cost at the product design stage

GOSTR, DC contactor design

  • GOST IEC 60947-4-3-2017 Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
  • GOST R 59032.4-2020 High-voltage direct current power transmission. Guidance to the specification and design evaluation of AC filters. Part 4. Equipment
  • GOST R 59032.1-2020 High-voltage direct current power transmission. Guidance to the specification and design of AC filters. Part 1. Overview
  • GOST R 59032.3-2020 High-voltage direct current power transmission. Guidance to the specification and design evaluation of AC filters. Part 3. Modelling
  • GOST IEC 60947-4-2-2017 Low-voltage switchgear and controlgear. Part 4-2. Contactors and motor-starters. AC semiconductor motor controllers and starters for AC electric motors

National Electrical Manufacturers Association（NEMA), DC contactor design

  • NEMA ICS 2 PART 8-1996 CONTROLLERS, CONTACTORS, AND OVERLOAD RELAYS RATED NOT MORE THAN 2000 VOLTS AC OR 750 VOLTS DC, PART 8: DISCONNECT DEVICES FOR USE IN INDUSTRIAL CONTROL EQUIPMENT

IT-UNI, DC contactor design

IEC - International Electrotechnical Commission, DC contactor design

  • PAS 62344-2007 General guidelines for the design of ground electrodes for high-voltage direct current (HVDC) links (NPPAS) (Edition 1.0)
  • TS 62344-2013 Design of earth electrode stations for high-voltage direct current (HVDC) links – General guidelines (Edition 1.0)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, DC contactor design

  • PREN 2349-306-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 306: Overload D.C. and A.C. (Edition P 1)

CENELEC - European Committee for Electrotechnical Standardization, DC contactor design

  • EN 50123-4:1999 Railway Applications - Fixed Installations - D.C. Switchgear - Part 4: Outdoor d.c.In-Line Switch-Disconnectors@ Disconnectors and d.c. Earthing Switches

AIA/NAS - Aerospace Industries Association of America Inc., DC contactor design

  • NAS405-1961 Receptacle - External Power Connection Direct Current@ Design and Installation of (for Aircraft) (Rev 2)

PT-IPQ, DC contactor design

Japanese Industrial Standards Committee (JISC), DC contactor design

  • JIS C 5402-2-2:2005 Connectors for electrical equipment -- Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests -- Test 2b: Contact resistance -- Specified test current method

American Gear Manufacturers Association, DC contactor design

  • AGMA 04FTM9-2004 Design of a High Ratio, Ultra Safe, High Contact Ratio, Double Helical Compound Planetary Transmission for Helicopter Applications

  DC contactor standard, DC contactor standard, DC contactor, DC contactor test, DC contactor brazing, HVDC contactor, DC contactor test, DC contactor test, DC Contactor Specifications, Locomotive DC contactor, DC contactor brazing, Vacuum DC contactor, Vacuum DC contactor, DC contactor quality, DC vacuum contactor, Standard DC Contactor, DC contactor design, DC contactor detection, DC contactor technology, DC contactor inspection.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved