ZH
RU
ES

Three-point bending of pipe fittings

Three-point bending of pipe fittings, Total:307 items.

In the international standard classification, Three-point bending of pipe fittings involves: Materials for aerospace construction, Glass, Plastics, Farming and forestry, Reinforced plastics, Paper and board, Adhesives, Medical equipment, Valves, Pipeline components and pipelines, Iron and steel products, Rubber and plastics products, Inorganic chemicals, Refractories, Products of the textile industry, Testing of metals, Paints and varnishes, Aerospace fluid systems and components, Ceramics, Road vehicle systems, Insulating materials, Construction materials, Installations in buildings, Fluid power systems, Waxes, bituminous materials and other petroleum products, Products of the chemical industry, Fruits. Vegetables, Semiconductor devices, Products of non-ferrous metals, Raw materials for rubber and plastics, Aerospace electric equipment and systems, Aerosol containers.

British Standards Institution (BSI), Three-point bending of pipe fittings

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS ISO 5628:2019 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
DD ENV 1966-1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS ISO 21751:2011 Plastics pipes and fittings. Decohesion test of electrofusion assemblies. Strip-bend test
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
23/30449747 DC BS EN ISO 899-2. Plastics. Determination of creep behaviour - Part 2. Flexural creep by three-point loading
BS EN ISO 6802:2018 Rubber or plastics hoses and hose assemblies. Hydraulic impulse test with flexing
BS EN 1966:2002 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method
BS EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
BS EN ISO 6803:2017 Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
BS EN ISO 10619-1:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS EN ISO 10619-2:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
BS ISO 9538:2017 Aerospace series. Hydraulic tubing joints and fittings. Planar flexure test
BS M 55:1984 Method for rotary flexure testing of hydraulic tubing joints and fittings for aerospace use
BS IEC 62047-31:2019 Semiconductor devices. Micro-electromechanical devices - Four-point bending test method for interfacial adhesion energy of layered MEMS materials
BS EN ISO 6802:2015 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
BS EN ISO 6802:2008 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
BS EN ISO 8032:1999 Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)
BS EN ISO 8032:1998 Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)
BS ISO 10154:1995 Light gauge metal containers. Three-piece necked-in tinplate aerosol cans. Dimensions of the top end
19/30402782 DC BS EN 10374. Welded fittings for the food and chemical industries. Tees, bends and reducers for welding
BS EN 10374:2021 Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN ISO 3503:2015 Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending

FI-SFS, Three-point bending of pipe fittings

SFS-ISO 6602 E:1986 This standard is approved in English

German Institute for Standardization, Three-point bending of pipe fittings

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003); German version EN ISO 899-2:2003
DIN EN ISO 899-2:2015-06 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015 / Note: To be replaced by DIN EN ISO 899-2 (2023-03) (in preparation).
DIN EN 1966:2009-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2009
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN ISO 8032:1999 Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999
DIN 16841:2012-08 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
DIN EN ISO 899-2:2023-03 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO/DIS 899-2:2023); German and English version prEN ISO 899-2:2023 / Note: Date of issue 2023-02-03*Intended as replacement for DIN EN ISO 899-2 (2015-06).
DIN EN ISO 6802:2018-12 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018); German version EN ISO 6802:2018
DIN EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; English version of DIN EN 1966:2009-07
DIN EN ISO 6803:1997 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997
DIN EN ISO 6802:2018 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018)
DIN 16967-2:1982 Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions
DIN EN ISO 6802:2010 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005); German version EN ISO 6802:2008
DIN EN ISO 6803:2017-07 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017); German version EN ISO 6803:2017
DIN EN 12100:2023-11 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports; German and English version prEN 12100:2023 / Note: Date of issue 2023-10-13*Intended as replacement for DIN EN 12100 (1997-11).
DIN EN 10374:2021-10 Welded fittings for the food and chemical industries - Tees, bends and reducers for welding; German version EN 10374:2021
DIN 55502-3:1987 Metal packages; three-piece tin-plate or black-plate, cylindrical, necked-in aerosol cans
DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010
DIN EN 10374:2019 Welded fittings for the food and chemical industries - Tees, bends and reducers for welding; German and English version prEN 10374:2019
DIN 16967-2:1982-07 Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions
DIN EN ISO 3503:2015-06 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
DIN EN 524-3:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test; German version EN 524-3:1997
DIN EN ISO 899-2:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three-point bending of pipe fittings

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method
GB/T 33099-2016 Test methods of stiffness for dipped reinforcing material—Three-point bending

American Society for Testing and Materials (ASTM), Three-point bending of pipe fittings

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM F2606-08 Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM F2606-08(2014) Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM F2606-08(2021) Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C947-99 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM C947-03(2016) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
ASTM C947-03(2023) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending

AENOR, Three-point bending of pipe fittings

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
UNE-EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)
UNE-EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
UNE-EN ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
UNE-EN ISO 6802:2009 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005)

American National Standards Institute （ANSI), Three-point bending of pipe fittings

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)
ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending

RU-GOST R, Three-point bending of pipe fittings

GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST 6942.9-1980 Cast iron waste pipes and fittings. Bends. Construction and dimensions

Association Francaise de Normalisation, Three-point bending of pipe fittings

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF A49-858:1988 Steel tubes. Bend test on test pieces taken from tubes.
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF T30-010:1992 Paints and varnishes. Evaluation of adhesion or cohesion. Three point bending method.
NF EN ISO 899-2:2003 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points
NF EN 1966:2009 Adhésifs structuraux - Caractérisation d'une surface par mesure de l'adhérence au moyen de la méthode de la flexion en trois points
NF T76-143*NF EN 1966:2009 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method.
NF T51-103-2/A1*NF EN ISO 899-2/A1:2015 Plastics - Determination of creep behaviour - Part 2 : flexural creep by three-point loading - Amendment 1
NF EN ISO 899-2/A1:2015 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points - Amendement 1
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
NF L41-230:1985 Aircraft. Hydraulic tubing joints and fittings. Rotary flexure test.
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF EN 2746:1998 Série aérospatiale - Plastiques renforcés au verre textile - Essai de flexion. Méthode des trois pannes.
NF T47-286*NF EN ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
NF E48-088:1999 Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test).
NF L54-002-059*NF EN 2591-416:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 416 : contact bending strength
NF EN ISO 3503:2015 Systèmes de canalisations en plastique - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression interne de montages soumis à une courbure
NF EN 10374:2021 Raccords soudés pour l'industrie alimentaire et chimique - Tés, coudes et réductions à souder
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)
NF A49-261*NF EN 10374:2021 Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
NF EN 12100:1997 Systèmes de canalisations en plastiques - Robinets en polyéthylène (PE) - Méthode d'essai de la résistance à la flexion entre supports.
NF A49-281:1992 Steel tubes,tubular accessories,bends,tee,reduction for welding made from seamless tube with quality specifications - Dimensions - Technical delivery conditions

European Committee for Standardization (CEN), Three-point bending of pipe fittings

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
EN ISO 899-2:1996 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 1993
EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
EN ISO 899-2:2003 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 2003
prEN ISO 899-2 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO/DIS 899-2:2023)
EN 1966:2002 Structural adhesives Characterisation of a surface by measuring adhesion by means of the three point bending method Supersedes ENV 1966: 1995
EN ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulicpressure impulse test without flexing
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN 2591-416:2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength
EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)
EN ISO 6802:2008 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
EN 10374:2021 Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)
EN ISO 1746:2000 Rubber or Plastics Hoses and Tubing - Bending Tests Supersedes EN 21746:1993; ISO 1746:1998, Including Technical Corrigendum 1:1999
EN ISO 8032:1999 Rubber and Plastics Hose Assemblies - Flexing Combined with Hydraulic Impulse Test (Half-Omega Test)
EN 713:1993 Plastics Piping Systems - Mechanical Joints Between Fittings and Polyolefin Pressure Pipes - Test Method for Leaktightness Under Internal Pressure of Assemblies Subjected to Bending

Danish Standards Foundation, Three-point bending of pipe fittings

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
DS/EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
DS/ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
DS/EN 10374:2021 Welded fittings for the food and chemical industries – Tees, bends and reducers for welding
DS/EN ISO 6802:2009 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
DS/EN 12100:1998 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

Lithuanian Standards Office , Three-point bending of pipe fittings

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1966-2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
LST EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)
LST EN ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2008)
LST EN ISO 6802:2009 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005)
LST EN 12100-2002 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

International Organization for Standardization (ISO), Three-point bending of pipe fittings

ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO 1746:1998 Rubber or plastics hoses and tubing - Bending tests
ISO/DIS 899-2:1968 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO 899-2:2003/Amd 1:2015 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1
ISO 13924:2000 Plastics pipes and fittings - Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
ISO 1746:1998/Cor 1:1999 Rubber or plastics hoses and tubing - Bending tests
ISO/DIS 9538:1990 Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test
ISO 6803:1994 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
ISO 6803:1984 Rubber or plastics hoses and hose assemblies — Hydraulic pressure impulse test without flexing
ISO 6802:1982 Rubber and plastics hose and hose assemblies — Wire reinforced — Hydraulic impulse test with flexing
ISO 6802:2018 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing
ISO 6802:1991 Rubber and plastics hose and hose assemblies with wire reinforcements; hydraulic impulse test with flexing
ISO 6802:2005 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
ISO 8032:1987 Rubber and plastics hose assemblies — Flexing combined with hydraulic impulse test (Half omega test)
ISO 3503:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under internal pressure when subjected to bending
ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending

AT-ON, Three-point bending of pipe fittings

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.
ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

Korean Agency for Technology and Standards (KATS), Three-point bending of pipe fittings

KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 899-2-2016(2021) Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
KS R ISO 13216-1-2015(2020) Road vehicles－Anchorages in vehicles and attachments to anchorages for child restraint systems－Part 1：Seat bight anchorages and attachements
KS M ISO 6802:2021 Rubber or plastics hoses and hose assemblies —Hydraulic impulse test with flexing
KS M ISO 6803:2018 Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing
KS M ISO 12986-1-2004(2009) Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method
KS M ISO 6802:2010 Rubber and plastics hoses and hose assemblies with wire reinforcements-Hydraulic impulse test with flexing
KS M ISO 8032:2009 Rubber and plastics hose assemblies－Flexing combined with hydraulic impulse test(half-omega test)

Professional Standard - Medicine, Three-point bending of pipe fittings

YY/T 0858-2011 Standard guide for three-piont bending of balloon expandable vascular stents and stent systems

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Three-point bending of pipe fittings

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

Group Standards of the People's Republic of China, Three-point bending of pipe fittings

T/ZZB 2342-2021 Exposed curved steel pipe element
T/CSTM 00820-2022 Rotary flexure test method of hydraulic tubing joints and fittings for civil aircraft

国家市场监督管理总局、中国国家标准化管理委员会, Three-point bending of pipe fittings

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-point bending of pipe fittings

GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading
GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method

Society of Automotive Engineers (SAE), Three-point bending of pipe fittings

SAE ARP1185-1973 FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS
SAE ARP1185A-2011 FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS
SAE AIR1418A-2013 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418-2011 FLEXURE FATIGUE STRENGTH OF TUBE FITTING JOINTS
SAE AIR1418B-2020 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418A-1996 Flexure Fatigue Strength of Tube Fitting Joints
SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE ARP1185B-2013 Flexure Testing of Hydraulic Tubing Joints and Fittings
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE AS4265-1992 Impulse Testing of Hydraulic Tubing and Fittings, S-N Curve
SAE MA2003-1981 Rotary Flexure Testing of Hydraulic Tubing Joints and Fittings
SAE MA2003-2015 Rotary Flexure Testing of Hydraulic Tubing Joints and Fittings
SAE AIR1529-2011 FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS BY PLANAR RESONANT VIBRATION (FREE-FREE BEAM)
SAE AIR1529A-1989 Flexure Testing of Hydraulic Tubing Joints and Fittings by Planar Resonant Vibration (Free-Free Beam)
SAE AIR1529A-2013 Flexure Testing of Hydraulic Tubing Joints and Fittings by Planar Resonant Vibration (Free-Free Beam)
SAE AIR1529B-2020 Flexure Testing of Hydraulic Tubing Joints and Fittings by Planar Resonant Vibration (Free-Free Beam)

CZ-CSN, Three-point bending of pipe fittings

CSN 13 2604-2001 Pipe bends - Technical delivery code

Malaysia Standards, Three-point bending of pipe fittings

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

KR-KS, Three-point bending of pipe fittings

KS M ISO 899-2-2016 Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 6802-2021 Rubber or plastics hoses and hose assemblies —Hydraulic impulse test with flexing
KS M ISO 6803-2018 Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing

CEN - European Committee for Standardization, Three-point bending of pipe fittings

DD ENV 1966-1995 Structural Adhesives - Characterization of a Surface by a Measuring Adhesion by Means of the Three Point Bending Method
EN ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulicpressure impulse test without flexing
EN ISO 6802:2018 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing

未注明发布机构, Three-point bending of pipe fittings

DIN EN 1966:2003 Structural adhesives — Characterization of a surface by measuring adhesion by means of the three point bending method
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

Defense Logistics Agency, Three-point bending of pipe fittings

DLA MIL-DTL-52525/42 B-2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 Degrees BENT
DLA MS14311 REV C-2009 FITTINGS, PIPE, BRASS OR BRONZE, THREADED (90-DEG. ELBOWS, TEES, CROSSES, 45-DEG. ELBOWS, AND COUPLING), CLASS 250
DLA MIL-DTL-52618/1 E-2012 FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, 90-DEGREE ELBOWS, TEES, CROSSES, 45-DEGREE ELBOWS AND COUPLINGS (STRAIGHT SIZES)
DLA MS14305 REV C-2009 FITTINGS, PIPE, BRASS OR BRONZE, THREADED (TEES, CROSSES, 45-DEG. ELBOWS, AND COUPLINGS), CLASS 125

TH-TISI, Three-point bending of pipe fittings

TIS 2246.2-2005 Plastics.determination of creep behaviour.part 2: flexural creep by three.point loading

European Association of Aerospace Industries, Three-point bending of pipe fittings

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1
AECMA PREN 2591-D16-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D16 - Contact Bending Strength Issue P 1
AECMA PREN 4191-1994 Aerospace Series Pipe Coupling 8 Degrees 30' in Titanium Alloy Tees, Reduced, Bulkhead Branch, Long Edition P 1
AECMA PREN 4192-1994 Aerospace Series Pipe Coupling 8 Degrees 30' in Titanium Alloy Tees, Reduced, Bulkhead Branch Edition P 1
AECMA PREN 4193-1994 Aerospace Series Pipe Coupling 8 Degrees 30' in Titanium Alloy Tees, Reduced, Bulkhead Long Edition P 1
AECMA PREN 4194-1994 Aerospace Series Pipe Coupling 8 Degrees 30' in Titanium Alloy Tees, Reduced, Bulkhead Edition P 1

SAE - SAE International, Three-point bending of pipe fittings

SAE ARP1185C-2019 Flexure Testing of Hydraulic Tubing Joints and Fittings

NL-NEN, Three-point bending of pipe fittings

NEN-ISO 1746:1993 Rubber or plastics hoses and tubing. Bending tests (ISO 1746: 1983)
NEN-ISO 6802:1993 Rubber and plastics hose and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing (ISO 6802:1991)

NO-SN, Three-point bending of pipe fittings

NS 5598-1977 Butt welding fittings, bent saddle joints, nominal pressure 16

Professional Standard - Aviation, Three-point bending of pipe fittings

HB 6442-1990 Bending fatigue test of aircraft hydraulic conduits and connectors

The American Road & Transportation Builders Association, Three-point bending of pipe fittings

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
AASHTO LRFDFRP-2012 LRFD GUIDE SPECIFICATIONS FOR DESIGN OF CONCRETE-FILLED FRP TUBES FOR FLEXURAL AND AXIAL MEMBERS (First Edition)

AASHTO - American Association of State Highway and Transportation Officials, Three-point bending of pipe fittings

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
LRFDFRP-2012 LRFD GUIDE SPECIFICATIONS FOR DESIGN OF CONCRETE-FILLED FRP TUBES FOR FLEXURAL AND AXIAL MEMBERS (First Edition)

HU-MSZT, Three-point bending of pipe fittings

ES-UNE, Three-point bending of pipe fittings

UNE-EN ISO 6802:2019 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018)
UNE-EN 10374:2022 Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
UNE-EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)

Aerospace, Security and Defence Industries Association of Europe (ASD), Three-point bending of pipe fittings

ASD-STAN PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

Japanese Industrial Standards Committee (JISC), Three-point bending of pipe fittings

JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS K 6330-9:2003 Testing methods for rubber and plastics hoses -- Part 9: Bending properties of hoses and tubing

SE-SIS, Three-point bending of pipe fittings

SIS SS-ISO 7257:1985 Aircraft - Hydraulic tubing joints and fittings - Rotary flexure test

RO-ASRO, Three-point bending of pipe fittings

STAS SR ISO 7257:1996 Aircraft - Hidraulyc tubing joints and fittings - Rotary flexure test
STAS 11160/2-1978 CONNECTING PIECES FOR IPY AND IPEY INSULATING TUBES Straight and curved boxes a I 90°Dimensions
STAS 827-1975 Fittings for petroleum industry FLANGED 45° ELBOWS AND TEES
STAS 1303-1971 Forged steel threaded fittings NP 100 ELBOWS, TEES, CROSSES Dimensions
STAS 9985-1974 Cast iron pressure pipcs and fittings [DOUBLE SOCKET 1/4 BEND NP 10 Dimensions
STAS 825-1981 Fittings for petroleum industry ELBOWS, TEES AND CROSSES NP 140... NP 1050
SR 827-1997 Petroleum and natural gas industries - Fittings - Flanged 45° albows and tees
SR 825-1998 Petroleum and natural gas industries - Fittings - Elbows, tees and crosses PN 140 ... PN 1050
STAS SR ISO 3503:1995 Assembled joints between fittings and polyethylene (PE) pressure pipes-Test of leakproofness under internai pressure when subjected to bending

Professional Standard - Aerospace, Three-point bending of pipe fittings

QJ 1445-1988 Rotary bend test method for hydraulic conduit fittings and fittings

AR-IRAM, Three-point bending of pipe fittings

IRAM 2550-1967

IN-BIS, Three-point bending of pipe fittings

IS 1879 Pt.5-1975

International Electrotechnical Commission (IEC), Three-point bending of pipe fittings

IEC 62047-31:2019 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials

WRC - Welding Research Council, Three-point bending of pipe fittings

BULLETIN 299-1984 ENGINEERING ASPECTS OF CTOD FRACTURE TOUGHNESS TESTING ; THREE-DIMENSIONAL ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF THREE-POINT BEND SPECIMEN ; FAILURE PREDICTION OF NOTCHED PRESSURE VESSELS USING T

BELST, Three-point bending of pipe fittings

STB 2109-2010 Steel welded and bent pipe fittings for PN(Py) up to 10 MPa and DN up to 500 mm. General specifications

IEC - International Electrotechnical Commission, Three-point bending of pipe fittings

IEC 62047-31:2017 Semiconductor devices – Micro-electromechanical devices – Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials (Edition 1.0)

IT-UNI, Three-point bending of pipe fittings

UNI EN 10374-2021 Welded fittings for the food and chemical industries - Tees, bends and reducers for welding

American Welding Society (AWS), Three-point bending of pipe fittings

WRC 299:1984 Part 1: Engineering Aspects of CTOD Fracture Toughness Testing; Part 2: Three-Dimensional Elastic-Plastic Finite Element Analysis of Three-Point Bend Specimen; Part 3: Failure Prediction of Notched Pressure Vessels Using The CTOD Approach