iso design size

iso design size, Total:375 items.

In the international standard classification, iso design size involves: Installations in buildings, Shipbuilding and marine structures in general, Small craft, Buildings, Continuous handling equipment, Electromechanical components for electronic and telecommunications equipment, Linear and angular measurements, Road vehicle systems, Machine tool systems, Components for aerospace construction, Sports equipment and facilities, Pipeline components and pipelines, Mining equipment, Aerospace fluid systems and components, Cutting tools, Rails and railway components, Industrial trucks, Aerospace electric equipment and systems, Horology, Furniture, Road engineering, Chipless working equipment, Screw threads, Headgear. Clothing accessories. Fastening of clothing, Fasteners for aerospace construction, Fasteners, Power stations in general, Ventilators. Fans. Air-conditioners, Non-ferrous metals, External structures, Bearings, Welding, brazing and soldering, Rubber and plastics products, Electrical accessories, Clothes, Graphical symbols, Packaging and distribution of goods in general, Medical equipment, Technical drawings, Technical product documentation, Construction industry, Miscellaneous domestic and commercial equipment, Cinematography, Kitchen equipment, Mechanical structures for electronic equipment, Elements of buildings, Vocabularies, Photography, Wood-based panels, Ergonomics, Industrial automation systems, Measurement of volume, mass, density, viscosity, Integrated circuits. Microelectronics.

European Committee for Standardization (CEN), iso design size

EN ISO 11855-3:2015 Building environment design - Design@ dimensioning@ installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning
EN ISO 15236-1:2005 Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2005)
EN ISO 11855-3:2021/A1:2023 Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning - Amendment 1 (ISO 11855-3:2021/Amd 1:2023)
FprEN ISO 3611 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO/FDIS 3611:2023)
prEN ISO 5059-1 Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers - Part 1: Two-point inside micrometers - Design and metrological characteristics (ISO/DIS 5059-1:2023)
EN ISO 11855-3:2021 Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2021)
EN ISO 2009:2011 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
CEN EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
prEN ISO 13351 Fans - Dimensions (ISO/DIS 13351:2023)
EN 23661:1993 End-Suction Centrifugal Pumps - Baseplate and Installation Dimensions (ISO 3661 : 1977)
EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
EN ISO 11855-5:2015 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012)
EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
EN ISO 3611:2023 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
EN ISO 1089:2023 Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO 1089:2023)

AENOR, iso design size

UNE-EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
UNE-EN ISO 13385-1:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
UNE-EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
UNE-EN ISO 13385-2:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
UNE-EN ISO 3611:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
UNE-EN ISO 12215-5:2008/A1:2014 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination - Amendment 1 (ISO 12215-5:2008/Amd 1:2014)
UNE-EN ISO 13102:2013 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
UNE-EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
UNE-EN ISO 13351:2010 Fans - Dimensions (ISO 13351:2009)
UNE-EN ISO 9493:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
UNE-EN 3611:1996 AEROSPACE SERIES. SPIGOTS. DIMENSIONS AND FIT SELECTION. DESIGN STANDARD.
UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)

Lithuanian Standards Office , iso design size

LST EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
LST EN ISO 15236-1:2005 Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2005)
LST EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
LST EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
LST EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
LST EN ISO 3611:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
LST EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
LST EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
LST ISO 3055:1999 Kitchen equipment. Coordinating sizes (equivalent ISO 3055:1985)
LST EN ISO 13351:2010 Fans - Dimensions (ISO 13351:2009)
LST EN ISO 2624:2000 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
LST EN ISO 9493:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
LST EN 21089-2000 Electrode taper fits for spot welding equipment - Dimensions (ISO 1089:1980)
LST EN ISO 463:2006/AC:2009 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006/Cor 1:2007/Cor 2:2009)
LST EN 20693-2000 Dimensions of seam welding wheel blanks (ISO 693:1982)
LST EN ISO 14405-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
LST EN ISO 11064-4:2004 Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2004)
LST EN ISO 11064-4:2014 Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013)

German Institute for Standardization, iso design size

DIN EN ISO 12215-5:2020 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019)
DIN EN ISO 11855-3:2022-04 Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2021); German version EN ISO 11855-3:2021
DIN EN ISO 11855-3:2020 Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO/DIS 11855-3:2020); German and English version prEN ISO 11855-3:2020
DIN EN ISO 11855-3:2015 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012); German version EN ISO 11855-3:2015
DIN 20550:1990-07 Mine cars size small; components, main dimensions, design
DIN EN ISO 15236-1:2017 Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016); German version EN ISO 15236-1:2016
DIN 20570:1989-04 Mine cars; large size; dimensions, design and construction
DIN 20560:1989-07 Mine cars; middle size; dimensions, design and construction
DIN EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020); German and English version EN ISO 13385-2:2020
DIN EN ISO 13385-1:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
DIN EN ISO 13385-2:2013 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011); German version EN ISO 13385-2:2011
DIN EN ISO 3611:2022-06 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO/DIS 3611:2022); German and English version prEN ISO 3611:2022 / Note: Date of issue 2022-05...
DIN 7900:1997 Playing field equipment - Football goals - Design dimensions
DIN 21500:2001 Shaft sinking in mining - Design and dimensioning
DIN 21500:2017 Shaft sinking in mining - design and dimensioning
DIN EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011); German version EN ISO 13385-2:2011
DIN EN ISO 5059-1:2024-02 Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers - Part 1: Two-point inside micrometers - Design and metrological characteristics (ISO/DIS 5059-1:2024); German and English version prEN ISO 5059-1:2024 / Not...
DIN 20570:1989 Mine cars; large size; dimensions, design and construction
DIN 20560:1989 Mine cars; middle size; dimensions, design and construction
DIN EN ISO 12215-5:2020-03 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019); German version EN ISO 12215-5:2019
DIN EN ISO 3611:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010); German version EN ISO 3611:2010
DIN 3417:1998 Metallic slide fasteners - Design types, dimensions, materials
DIN 3418:1998 Plastic slide fasteners - Design types, dimensions, materials
DIN EN ISO 13102:2009 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial gauges (electronic digital) - Design and metrological characteristics (ISO/DIS 13102); German version prEN ISO 13102:2009
DIN EN ISO 1938-1:2016 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015
DIN EN ISO 12215-5:2014 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008 + Amd 1:2014); German version EN ISO 12215-5:2008 + A1:2014
DIN EN ISO 2624:1995-08 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990); German version EN ISO 2624:1995
DIN EN ISO 463 Berichtigung 1:2008 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006, Corrigenda to DIN EN ISO 463:2006-06; German version EN ISO 463:
DIN 20361:2010-04 Rock drilling - Chuck bushings - Connecting dimensions, material, design
DIN 20361:2010 Rock drilling - Chuck bushings - Connecting dimensions, material, design
DIN EN ISO 13385-1:2020-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019); German version EN ISO 13385-1:2019
DIN 20317:2014-02 Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design
DIN 103-9:1985-02 ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
DIN 21500:2017-05 Shaft sinking in mining - design and dimensioning
DIN 20351:2015 Rock drilling - Wedge-shaped shank connections for rotary drilling equipment - Dimensions, design
DIN 20351:2015-08 Rock drilling - Wedge-shaped shank connections for rotary drilling equipment - Dimensions, design
DIN EN ISO 13385-2:2020-09 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020); German and English version EN ISO 13385-2:2020
DIN EN ISO 3611:2023-09 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023); German and English version EN ISO 3611:2023 / Note: Date of issue 2023-08-18*...
DIN 20317:2014 Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design
DIN 20367:2010-04 Rock drilling - Round screw connections for rotary drilling equipment - Dimensions, design
DIN 20316:2012-11 Rock drilling - Thread connections for thin-walled rotary drilling equipment - Dimensions, design
DIN 20353:2016-03 Rock drilling - Trapezoidal thread connection for percussive drilling - Dimensions, design
DIN 84525:1999-12 Windlasses and anchor capstans - Cable lifters for anchor chains - Design dimensions
DIN 1829-1:1977-11 Pinion-type cutters for cylindrical gears; design, dimensions, definitions, marking
DIN 20316:2012 Rock drilling - Thread connections for thin-walled rotary drilling equipment - Dimensions, design
DIN 43802-3:1991-01 Line scales and pointers for indicating electrical measuring instruments; designs and dimensions
DIN EN 3611:1995 Aerospace series - Spigots - Dimensions and fit selection; design standard; German version EN 3611:1995
DIN EN ISO 9493:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010); German version EN ISO 9493:2010
DIN 2258:1986 Graphical symbols for dimensional metrology

未注明发布机构, iso design size

DIN EN ISO 11064-4:2004 Ergonomic design of control centers – Part 4: Design and dimensions of workstations (ISO 11064-4:2004); German version EN ISO 11064-4:2004
VDI 5586 Blatt 2-2022 In-plant milk-run systems Planning and dimensioning
DIN EN ISO 12215-5:2019 Small craft – Hull construction and sizing – Part 5: Monohull design pressures, design stresses, sizing determination
DIN 20361 E:2009-02 Rock drilling - Chuck bushings - Connecting dimensions, material, design
SAE AS4322-2007 Fitting End, Adjustable, Standard Dimensions for, Design Standard
SAE AS4320-2007 FITTING END, STRAIGHT THREAD, STANDARD DIMENSIONS FOR, DESIGN STANDARD
DIN EN ISO 11855-3 E:2015-03 Design, Dimensioning, Installation and Control of Embedded Radiant Heating and Cooling Systems for Built Environment Design Part 3: Design and Dimensional Specifications (Draft)
DIN 21500 E:2016-02 Shaft sinking in mining - design and dimensioning
DIN 488-4:1972 Reinforcing steel; reinforcing steel fabric and wire; design, dimensions and masses
DIN 20351 E:2014-04 Rock drilling - Wedge-shaped shank connections for rotary drilling equipment - Dimensions, design
DIN EN 1997-1:2009 Eurocode 7: Design, calculation and dimensioning in geotechnical engineering
DIN EN ISO 12215-5:2009 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
DIN 20353 E:2015-10 Rock drilling - Trapezoidal thread connection for percussive drilling - Dimensions, design
DIN 2512:1975 Flanges - Tongue and Groove, PN 160 - Design sizes; rings PN 10 to PN 160
SAE AS4321-2007 Fitting End, Internal Flare, Single Angle, Standard Dimensions for, Design Standard
DIN EN ISO 12215-5 E:2017-10 Hull construction and ship dimensions of small ships Part 5: Determination of design pressure, design stress and ship dimensions of monohull ships (draft)
DIN EN ISO 13385-2 E:2019-06 Geometric Product Specification (GPS) Dimensional Specifications and Measuring Equipment Part 2: Caliper Depth Gauge Design and Metrological Characteristics (Draft)

Danish Standards Foundation, iso design size

DS/EN ISO 11855-3:2021 Building environment design – Embedded radiant heating and cooling systems – Part 3: Design and dimensioning (ISO 11855-3:2021)
DS/EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
DS/ISO 725:2009 ISO inch screw threads - Basic dimensions
DS/EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
DS 2364:1994 Measuring equipment. Requirements for inspection equipment in dimensional metrology. Auxilliary equipment
DS/EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics
DS/EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
DS/EN ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics
DS/ISO 725:1988 ISO inch screw threads. Basic dimensions
DS/ISO 6149:1989 Fluid power systems and components. Metric ports. Dimensions and design
DS/EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics

RU-GOST R, iso design size

GOST 16840-1978 Pinned wire. Design and dimensions
GOST 9036-1988 Solid-rolled wheels. Design and dimensions
GOST 14742-1969 Knurled handles. Design and sizes
GOST 12465-1967 Stop pins. Design and sizes
GOST 17528-1972 Spindle cam arbors. Design and dimensions
GOST 17530-1972 Flanged cam arbors. Design and dimensions
GOST 18369-1973 Cover handles for snap gauges. Desing and dimensions
GOST 7722-1977 Cylindrical hands reamers. Design and dimensions
GOST 16211-1970 Centre cone arbors. Design and dimensions
GOST 16210-1977 Railway rails type P75. Design and dimensions
GOST 12774-1967 Universal straps, strengvthened. Design and dimensions
GOST 13649-1979 Spring lugs for the wrist watch cases. Design and sizes
GOST 16212-1970 Cylindrical centre arbors. Design and dimensions
GOST 12777-1967 Screw fixing supports. Design and dimensions
GOST 13060-1967 Axles for accesory tools. Design and dimensions
GOST 13061-1967 Rings for accesory tools. Design and dimensions
GOST 13152-1967 Bolts for machine slots. Design and dimensions
GOST 17680-1980 Light links for cable fixing. Design and dimensions
GOST 16213-1970 Cylindrical stepped centre arbors. Design and dimensions
GOST 17025-1971 End mills with cylindrical shank. Design and dimensions
GOST 17026-1971 End mills with tapered shank. Design and dimensions
GOST 12466-1967 Shackles with thread holes. Design and sizes
GOST 11641-1973 End caps with groove for felt ring. Design and dimensions
GOST 15878-1979 Resistance welding. Welded joints. Design elements and dimensions
GOST 17563-1980 Buttons for fixing soft tapes in cabling. Design and dimensions
GOST 4860.2-1983 Glands for electric cables and wires. Design and basis dimensions
GOST 11181-1971 Morse short taper reamers. Design and dimensions
GOST 13064-1967 Carrage holders straight for bar cutters. Design and dimensilns
GOST 15071-1975 Distance rings for tool holder for milling machines. Design and dimensions
GOST 17917-1986 Standard boy's figures. Measurements for projection of clothing
GOST 17522-1972 Standard women's figures. Measurements for projection of clothes
GOST 26236-1984 Normal and high precision intermediate bushes. Design and dimensions
GOST 16160-1970 Chucks for splined broaches of horizontal broaching machine tools. Design and dimensions
GOST 2.801-1974 Unified system for design documentation. Pattern method of projecting. Geometric form, model dimensions
GOST 21.113-1988 System of design documentation for construction. Presentation of dimensional accuracy data
GOST 2578-1970 Drivers for turning and milling. Design and dimensions
GOST 14749-1969 Snigle-ended handles for ganging members. Design and dimensions
GOST 15936-1970 Quick-changing stiff adapters for taps. Design and dimensions
GOST 17679-1980 Light yokes for pipe-line and cable fixing. Design and dimensions
GOST 16859-1971 Wedges for inserted blade counterbores. Design and dimensions
GOST 17931-1972 Machine taps with shortened flutes. Design and dimensions
GOST 17529-1972 Spindle cam arbors with pneumatic clamp. Design and dimensions
GOST 17531-1972 Flanged cam arbors with pneumatic clamp. Design and dimensions
GOST R 51623-2000 Mechanical structure designs of electronic equipment. Construction system and coordinating sizes
GOST 23167-1991 Standart figures of servicemen. Measurements for projection of military uniform
GOST 13063-1967 Carrage holders double-rolled for net knurling. Design and dimension
GOST 16230-1981 Cut off cutters for machining light alloys. Desigt and dimensions
GOST 26456.0-1989 Standard figures. Measurements for socks and stockings projection. Men's figures
GOST 26456.1-1989 Standard figures. Measurements for socks and stockings projection. Women's figures
GOST 26237-1984 Normal and high precision collar intermediate bushes. Design and dimensions
GOST R ISO 6959-1995 Gross-country ski boots with three pin holes. Dimensions. interface and design
GOST R ISO 6959-1996 Cross-country ski boots with three pin holes. Demensions, interface and design

IN-BIS, iso design size

IS 4218 Pt.3-1976 ISO Metric Threads Part III Basic Dimensions of Design Profiles
IS 4696 Pt.1-1976 Serrated Thread Dimensions Part I Basic and Design Profiles

VN-TCVN, iso design size

TCVN 50-1986 Countersunk head screws.Design and dimensions
TCVN 52-1986 Cheese head screws.Designs and dimensions
TCVN 49-1986 Mushroom head screws.Design and dimensions
TCVN 51-1986 Raised countersunk head screws.Design and dimensions
TCVN 54-1986 Hexagon socket headcap screws.Design and dimensions
TCVN 4278-1986 Intermediate flanges for self-centering chucks.Design and dimensions
TCVN 2193-1977 Romded off pan head screws(standard precision).Design and dimensions
TCVN 4368-1986 System for design documentation.Rules of simple dimensioning for holes
TCVN 4107-1985 Outside micrometers.Cavity micrometers.Basic dimensions

RO-ASRO, iso design size

STAS 7639-1980 Machine-tools OIL GAUGES Dimensions
STAS 6112-1989 TAPERED ROLLER THURST BEARINGS General plan of dimensions
STAS 12579-1987 INNER GROOVING HEADS, WITH ECCENTRIC Main dimensions
STAS 1373/3-1973 DEPTH GAUGE VERNIER CALIPERS Dimensions
STAS 10082-1975 35 mm FILMSTRIPS Dimensions and formats
STAS SR ISO 2421:1972 Cylindricai abrasive sleeves - Designation - Dimensions - Tolerances
STAS 9247/5-1980 GAUGES Shapes and dimensions
STAS 12279-1984 SPOT PROJECTION AND SEAM WELDED JOINTS Design elements and dimensions
STAS 2114/3-1975 ISO TRAPEZOIDAL SCREW THREADS Basic sizes

ES-AENOR, iso design size

UNE 56-807-1986 Wood floor design and dimensions

British Standards Institution (BSI), iso design size

BS 4467:1991(2012) Guide to Dimensions in designing for elderly people
20/30420627 DC BS ISO 3055. Kitchen equipment. Coordinating sizes
22/30398242 DC BS ISO 3611. Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics
BS EN ISO 12215-5:2019 Small craft. Hull construction and scantlings - Design pressures for monohulls, design stresses, scantlings determination
BS EN ISO 11855-3:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Design and dimensioning
BS EN ISO 13385-1:2019 Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of callipers
BS EN ISO 13385-1:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Callipers. Design and metrological characteristics
BS EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Design pressures for monohulls, design stresses, scantlings determination
BS EN 3611:1995 Spigots - Dimensions and fit selection - Design standard
BS EN ISO 13385-2:2020 Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of calliper depth gauges
BS ISO 10552:2012 Timekeeping instruments. Crowns and sealed tubes. Designs and dimensions
BS ISO 10552:2014 Timekeeping instruments. Crowns and sealed tubes. Designs and dimensions
BS EN ISO 3611:2010(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment : Micrometers for external measurements — Design and metrological characteristics
20/30391111 DC BS EN ISO 11855-3. Building environment design. Embedded radiant heating and cooling systems. Part 3. Design and dimensioning
23/30445003 DC BS EN ISO 11855-3 AMD1. Building environment design. Embedded radiant heating and cooling systems - Part 3. Design and dimensioning
BS EN ISO 11855-3:2021 Building environment design. Embedded radiant heating and cooling systems. Design and dimensioning
BS EN ISO 13225:2012(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment ; Height gauges — Design and metrological characteristics
BS EN ISO 13385-2:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Calliper depth gauges. Design and metrological characteristics
BS EN ISO 13225:2012 Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
BS EN ISO 3611:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics
BS EN ISO 3611:2010 Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics
BS EN 60297-3-105:2009 Mechanical structures for electronic equipment — Dimensions of mechanical structures of the 482,6 mm (19 in) series — Part 3-105: Dimensions and design aspects for 1U high chassis
BS EN ISO 11855-3:2021+A1:2023 Building environment design. Embedded radiant heating and cooling systems. Design and dimensioning
21/30432756 DC BS ISO 14548. Photography. Dimensions of glass plates
12/30257543 DC BS ISO 1954. Plywood. Tolerances on dimensions
19/30397491 DC BS ISO 2904. ISO metric trapezoidal screw threads. Basic dimensions

U.S. Military Regulations and Norms, iso design size

ARMY MIL-HDBK-204 A NOTICE 1-2013 DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS
ARMY MIL-HDBK-204A-1990 DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS
ARMY MIL-HDBK-682 VALID NOTICE 1-2004 TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT
ARMY MIL-HDBK-682-1991 TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT
ARMY MIL-STD-408 A NOTICE 1-1961 BRUSHES, ELECTRICAL CONTACT, RECTANGULAR, STANDARD DESIGNS AND DIMENSIONS FOR
ARMY MIL-F-43101 A (1)-1967 FILING CABINET, LETTER SIZE DESIGN, STEEL, OD, ONE DRAWER HIGH, ONE DRAWER WIDE
ARMY MIL-F-43101 A-1967 FILING CABINET, LETTER SIZE DESIGN, STEEL, OD, ONE DRAWER HIGH, ONE DRAWER WIDE

PL-PKN, iso design size

PN-EN ISO 13385-2-2020-10 E Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
PN M45361-1991 Bed electric lifts. Basic parameteres dimensions and direction for design
PN M45360-1992 Passenger electric lifts. Basic parameters dimensions and direction for desing
PN M45362-1987 Service electric lifts asic parameters, dimensions and irections for design

AWS - American Welding Society, iso design size

FWSH-1997 Design Handbook for Calculating Fillet Weld Sizes

SE-SIS, iso design size

SIS SS 91 42 21-1989 Building design — Housing — Functional sizes
SIS SS 91 42 21-1988 Building design — Housing — Functional sizes
SIS SMS 960-1973 Mould bases. Dimensions for plates. Guide I i nes for design
SIS SS-ISO 5457:1983 Technical drawings - Sizes and layout of drawing sheets
SIS SS-ISO 5457:1991 Technical drawings — Sizes and layout of drawing sheets
SIS SS-ISO 6149:1985 Fluid power systems and components - Metric ports - Dimensions and design

Society of Automotive Engineers (SAE), iso design size

SAE MA2110-1985 PORT, RING LOCKED DESIGN STANDARD DIMENSIONS FOR
SAE AS4330A-2014 TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE MA2110A-2015 PORT, RING LOCKED DESIGN STANDARD DIMENSIONS FOR
SAE AS4325-1993 Fitting End, Conical, Standard Dimensions for, Design Standard
SAE AS4330-1993 TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD FSC 4730
SAE AS4330-2005 TUBING, FLARED, STANDARD, DIMENSIONS FOR, DESIGN STANDARD
SAE MA2110A-1988 Port, Ring Locked Design Standard Dimensions for FSC 4730
SAE AS4322-2015 FITTING END, ADJUSTABLE, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE AS5131-1997 Tube End - Beaded, Design Standard TABLE1-DIMENSIONS
SAE AS4322-1993 Fitting End, Adjustable, Standard Dimensions for, Design Standard
SAE AS4325-2007 FITTING END, CONICAL, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE AS4320-2015 FITTING END, STRAIGHT THREAD, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE J699A-1977 AVERAGE VEHICLE DIMENSIONS FOR USE IN DESIGNING DOCKING FACILITIES FOR MOTOR VEHICLES
SAE AS4321-1993 Fitting End, Internal Flare, Single Angle, Standard Dimensions for, Design Standard
SAE AS4321-2015 FITTING END, INTERNAL FLARE, SINGLE ANGLE, STANDARD DIMENSIONS FOR, DESIGN STANDARD

Korean Agency for Technology and Standards (KATS), iso design size

KS V ISO 12215-5-2014(2019) Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
KS B ISO 10552:2002 Timekeeping instruments-Crowns and sealed tubes-Designs and dimensions
KS B ISO 10552-2013 Timekeeping instruments－Crowns and sealed tubes－Designs and dimensions
KS V ISO 12215-5:2014 Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
KS V ISO 12215-5:2022 Small craft — Hull construction and scantlings — Part 5: Design pressures, design stresses and scantlings determination for monohulls
KS B ISO 13385-1-2019 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics
KS B ISO 13385-1:2014 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics
KS P 1509-2006 Principle and recommendation for designingdimension of dwelling in consideration of the elderly
KS B ISO 10552-2002(2012) Timekeeping instruments－Crowns and sealed tubes－Designs and dimensions
KS B ISO 463-2014(2019) Geometrical Product Specifications(GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges

CZ-CSN, iso design size

CSN 13 7675-1984 Machine screwing. Design and basic dimensions
CSN ISO 5457:1994 Technical drawings.Sizes and layout of drawing sheets
CSN 13 7656-1982 Machine screwing. Cutting ferrules. Design and basic dimensions
CSN 91 0725-1960 Kitchen working coveringplate Fundamental dimensions and design
CSN 91 0722-1960 Standing kitchen case Fundamental dimensions and design
CSN 13 7658-1982 Machine screwing. Sealing cone. Design and basic dimensions
CSN 91 0721-1960 Hanging kitchen case Fundamental dimensions and design
CSN 25 1406-1986 Micrometer heads. Fundamental dimensions
CSN 25 6162-1975 Contact-less ganges or measuring hn size of area
CSN 91 0724-1960 Kitchen case wilh the sink Fundamental dimensions and design
CSN 91 0723-1960 Kitchen case wilh the sink Fundamental dimensions and design
CSN 25 7619-1987 Glass areometers of constant mass. Sugar areometers. Dimensions
CSN 25 1458-1986 Micrometers for tube walls. Fundamental dimensions

NL-NEN, iso design size

NEN 1718-1982 Rollcontainers - Design, dimensions and mechanicalrequirements
NEN-ISO 3661:1993 End-suction centrifugal pumps. Baseplate and installation dimensions (ISO 3661:1977)

BELST, iso design size

STB 1902-2008 Metal thread bushings. Design and dimensions
STB 1844-2008 Metal nonthread bushings. Design and dimensions
STB 2098-2010 Chains and their components. Models. Design and dimensions

North Atlantic Treaty Organization Standards Agency, iso design size

STANAG 3639-2004 AIRCREW STATION DIMENSIONAL DESIGN FACTORS

Association Francaise de Normalisation, iso design size

NF J95-046-5*NF EN ISO 12215-5:2019 Small craft - Hull construction and scantlings - Part 5 : design pressures for monohulls, design stresses, scantlings determination
NF E11-085-2*NF EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : design and metrological characteristics of calliper depth gauges
NF J95-046-5:2008 Small craft - Hull construction and scantlings - Part 5 : design pressures for monohulls, design stresses, scantlings determination.
NF E75-079:1987 COATED ABRASIVE PRODUCTS. DIMENSIONAL TOLERANCES ON NON-STANDARD CONVERSIONS.
NF P91-100:1994 Public car-parks. Criteria for functional capability. Design and dimensions.
NF E11-085-1*NF EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers
NF E11-085-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : calliper - Design and metrological characteristics.
NF EN ISO 3611:2023 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur
NF EN ISO 13385-1:2019 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 1 : caractéristiques de conception et caractéristiques métrologiques des pieds à coulisses
NF J95-046-5/A1:2014 Small craft - Hull construction and scantlings - Part 5 : design pressures for monohulls, design stresses, scantlings determination - Amendment 1
NF E85-031:1989 Elements of industrials plants. Straight flight metallic staires. Terminology. Design. Dimensions.
NF E22-320:2002 Rolling bearings - Thrust bearings - Boundary dimensions, general plan.

International Organization for Standardization (ISO), iso design size

ISO 10552:1999 Timekeeping instruments - Crowns and sealed tubes - Designs and dimensions
ISO 10552:2014 Timekeeping instruments - Crowns and sealed tubes - Designs and dimensions
ISO 10552:2012 Timekeeping instruments - Crowns and sealed tubes - Designs and dimensions
ISO 12215-5:2019 Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
ISO 11855-3:2021 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 3: Design and dimensioning
ISO 11855-3:2012 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning
ISO 13385-2:2020 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Design and metrological characteristics of calliper depth gauges
ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics
ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
ISO 3611:2023 Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of micrometers for external measurements
ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
ISO 13385-1:2019 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of callipers
ISO 725:2009 ISO inch screw threads - Basic dimensions
ISO 724:1978 ISO metric screw threads — Basic dimensions
ISO 725:1978 ISO inch screw threads; Basic dimensions
ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
ISO 12215-5:2008/Amd 1:2014 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination; Amendment 1
ISO/CD 5059-1 Geometrical product specifications (GPS) — Dimensional measuring equipment: inside micrometers — Part 1: Two-point inside micrometers — Design and metrological characteristics
ISO 104:2002 Rolling bearings - Thrust bearings - Boundary dimensions, general plan
ISO 104:2015 Rolling bearings - Thrust bearings - Boundary dimensions, general plan

ZA-SANS, iso design size

SANS 12215-5:2009 Small craft - Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination

KR-KS, iso design size

KS V ISO 12215-5-2022 Small craft — Hull construction and scantlings — Part 5: Design pressures, design stresses and scantlings determination for monohulls

YU-JUS, iso design size

JUS Z.S2.323-2004 Road signs Direction signs for organizations Shape and sizes
JUS M.F1.010-1989 End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and ?imensions

HU-MSZT, iso design size

MNOSZ 15899-1953 Industrial water area architectural design. Main dimensions
MSZ 6003-1958 Tube type temperature measurement equipment. Normal editing size
MSZ 6269-1963 Open wood design. Single-layer window products 80x200 size products

ES-UNE, iso design size

UNE-EN ISO 12215-5:2020 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019)
UNE-EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, iso design size

GB/T 34839-2017 Timekeeping instruments—Designs and dimensions of crowns and sealed tubes

SAE - SAE International, iso design size

SAE AS4325A-1993 Fitting End@ Conical@ Standard Dimensions for@ Design Standard
SAE AS4320-1993 Fitting End@ Straight Thread@ Standard Dimensions for@ Design Standard (FSC 4730)

国家市场监督管理总局、中国国家标准化管理委员会, iso design size

GB/T 19314.5-2019 Small craft—Hull construction and scantlings—Part 5: Design pressures for monohulls, design stresses, scantlings determination

Association of German Mechanical Engineers, iso design size

VDI 4656-2013 Design and dimensioning of micro combined heat and power plants

Professional Standard - Machinery, iso design size

JB/T 9184-1999 Statistical dimension tolerances

American National Standards Institute （ANSI), iso design size

ANSI/ASME B89.7.2-2014 Dimensional Measurement Planning
BS EN ISO 3611:2023 Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
ANSI/ASME B1.30-2002 Screw Threads: Standard Practice for Calculating and Rounding Dimensions

American Society of Mechanical Engineers (ASME), iso design size

ASME B89.7.2-2014(R2019) Dimensional Measurement Planning

Military Standard of the People's Republic of China-General Armament Department, iso design size

GJB/Z 20-1991 Dimension chain calculation book
GJB/Z 11-1990 Dimension chain calculation guidelines

FI-SFS, iso design size

SFS 3260-1975 ISO-TOLERANSSIT.PERUSTOLERANSSIEN JA PERUSEROMITTOJEN LASKEMINEN
SFS 2003-1966 Tolerances of thread dimensions in metric ISO-thread statistics. Diameter 1.6...39mm
SFS 2004-1966 Tolerances of thread dimensions in metric ISO-thread statistics. Diameter 40...100mm
SFS 3263-1975 ISO-TOLERANSSIT. REIKIEN EROMITAT
SFS 3264-1975 ISO tolerance. Different sizes of shafts

GOSTR, iso design size

GOST 19127-1973 Double-headed fish plates for P43 rails. Design and dimensions
GOST R 58705-2019 Floorball sticks. Design and basic dimensions. Technical requirements
GOST 17163-1990 Hard metal brazed tips, type 13. Design and dimensions
GOST R 51623-2020 Mechanical structure designs of electronic equipment. Construction system and coordinating sizes

VDI - Verein Deutscher Ingenieure, iso design size

VDI 2225 Blatt 4-1997 Konstruktionsmethodik - Technisch-wirtschaftliches Konstruieren - Bemessungslehre
VDI 5586 BLATT 2-2016 Routenzugsysteme - Planung und Dimensionierung

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, iso design size

GB/T 5847-2004 Dimensional chain-Methods of calculation
GB/T 21110-2007 Projectors.Image size/projection distance calculations
GB/T 17864-1999 CD Metrology procedures

BE-NBN, iso design size

NBN-EN 23661-1993 End-suction centrifugal pumps. Baseplate and installation dimensions (ISO 3661: 1977)

CU-NC, iso design size

NC 13-15-1987 Geodesy and Cartography. Geodetic Monuments. Design and Dimensioning
NC 16-78-1985 Interchangeability Basic Standards. High Prismatic Keys. Main Dimensions and Design Specifications
NC 75-03-1988 Shipbuilding. Steel Manholes Types, Main Dimensions and Design Specifications
NC 75-08-1988 Shipbuilding. Ship Doors for Refrigerated Storerooms. Main Dimensions and Design Specificatíons

NO-SN, iso design size

NS 1177-1969 Hospital stainless steel articles - Dimensions and design requirements

Tianjin Provincial Standard of the People's Republic of China, iso design size

DB12/T 870-2019 Pallet packaging methods and general rules for packaging size design

NATO - North Atlantic Treaty Organization, iso design size

STANAG 3639-1992 Aircrew Station Dimensional Design Factors (ED 4 AMD 0)
STANAG 3639-1981 Aircrew Station Dimensional Design Factors (ED 3 AMD 5)

American Society for Testing and Materials (ASTM), iso design size

ASTM F3172-15 Standard Guide for Design Verification Device Size and Sample Size Selection for Endovascular Devices
ASTM F3172-15(2021) Standard Guide for Design Verification Device Size and Sample Size Selection for Endovascular Devices

CEN - European Committee for Standardization, iso design size

EN ISO 12215-5:2019 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls@ design stresses@ scantlings determination

US-FCR, iso design size

FCR FED H-08-4 VOL 4-E-G-6-1988 GENERATOR SIZE CALCULATION SHEET

European Association of Aerospace Industries, iso design size

AECMA PREN 3202-1989 Aerospace Series T-Head Bolt Traps Design Dimensions Issue P 1
AECMA PREN 3044-1990 Aerospace Series Installation of Self-Locking Thread Inserts Design Dimensions Issue P 1

Group Standards of the People's Republic of China, iso design size

T/FSAS 3-2016 Code for sizing design of compressors for room air conditioners

AT-ON, iso design size

ONORM S 3011-1995 Commercial catering equipment - Sinks - Dimensions Equipement des grandes cuisines - Eviers - Dimensions
ONORM EN 23661-1993 End-suction centrif ugal pumps - Baseplate and installation dimensions (ISO 3661:1977)
ONORM M 7515-1985 Calculation of dimensions ofchimneys; definitions, calculation procedure
OENORM ISO 2904:2021 ISO metric trapezoidal screw threads - Basic dimensions (ISO 2904:2020)

American Bearing Manufacturers Association, iso design size

ABMA 104-1994 Rolling bearings - Thrust bearings - Boundary dimensions, general plan

CH-SNV, iso design size

SNV 53511-1957 Metric ISO thread M 1.6 to M 68 tolerance, size, limit size 6H/6g
SN 640 710 a-1985 Metric ISO thread M 1.6 to M 68 tolerance, size, limit size 6H/6g