ZH

RU

ES

Test method for hydrogen bromide

Test method for hydrogen bromide, Total:495 items.

In the international standard classification, Test method for hydrogen bromide involves: Products of the chemical industry, Fuels, Organic chemicals, Air quality, Water quality, Adhesives, Inorganic chemicals, Analytical chemistry, Sterilization and disinfection, Non-ferrous metals, Electronic components in general, Pesticides and other agrochemicals, Non-metalliferous minerals, Raw materials for rubber and plastics, Natural gas, Lubricants, industrial oils and related products, General methods of tests and analysis for food products, Pulps, Plastics, Metalliferous minerals, Clothes, Soil quality. Pedology, Wood, sawlogs and sawn timber, Petroleum products in general, Metrology and measurement in general, Burners. Boilers, Products of the textile industry, Electrical and electronic testing, Environmental testing, Surface treatment and coating, Construction materials, Accident and disaster control, Fibre optic communications, Rubber, Road vehicle systems, Elements of buildings, Paints and varnishes, Textile fibres, Fasteners, Ferroalloys, Thermodynamics and temperature measurements, Non-destructive testing, TESTING, Testing of metals, Heat treatment, Semiconducting materials, Nuclear energy engineering, Optical equipment, Corrosion of metals, Ceramics, Photography, Materials for aerospace construction, Products of non-ferrous metals, Test conditions and procedures in general, Textile auxiliary materials, Gears, Crude petroleum, Protection against fire, Electrical wires and cables, Electricity. Magnetism. Electrical and magnetic measurements, Insulating fluids, Protection against crime, Quality, Radiation protection, Iron and steel products.


German Institute for Standardization, Test method for hydrogen bromide

  • DIN 51863-2:1983 Testing of gaseous fuels and other gases; determination of hydrogen cyanide content; bromide cyanogen method
  • DIN 53381-1:1983 Testing of plastics; determination of thermostability of polyvinyl chloride (PVC); dehydrochlorination methods
  • DIN 51408-1:1983 Testing of liquid petroleum hydrocarbons; determination of chlorine content; Wickbold combustion method
  • DIN 51796:2010 Testing of liquid mineral hydrocarbons - Determination of mercaptan sulfur content - Potentiometric method
  • DIN 51855-4:1995 Testing of gaseous fuels and other gases - Determination of sulphur compounds content - Part 4: Content of hydrogen sulfide, zinc acetate method
  • DIN 51863-1:1983 Testing of gaseous fuels and other gases; determination of hydrogen cyanide content; nickel carbonate method
  • DIN 51577-4:1994 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments
  • DIN 52106:2012 Testing of aggregates - Test methods for the assessment of the weathering resistance
  • DIN 52106:2004 Testing of aggregates - Test methods for the assessment of the weathering resistance
  • DIN 51777-1:1983 Testing of mineraloil hydrocarbons and solvents; determination of water content according to Karl Fischer; direct method
  • DIN 54270-2:1977 Testing of textiles; determination of the limit-viscosity of celluloses, Cuen-procedure
  • DIN 51796:1976 Testing of liquid mineral hydrocarbons; determination of mercaptan sulfur content, potentiometric and amperometric methods
  • DIN ISO 9022-20:2001 Optics and optical instruments - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide (ISO 9022-20:1997)
  • DIN 54204:1975 Testing of textiles; quantitative analysis of binary mixtures, wool with other fibres, potassium hydroxide solution method
  • DIN EN 3976:2007 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content; German and English version EN 3976:2006
  • DIN 38409-15:1987 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H); determination of hydrogen peroxide and its adducts (H 15)
  • DIN EN 50267-2-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of material from cables - Part 2-1: Procedures; determination of the amount of halogen acid gas; German version EN 50267-2-1:1998
  • DIN V 51408-2:1987 Testing of mineral oil hydrocarbons; determination of chlorine content; microcoulometric determination, oxidation method
  • DIN ISO 9022-20:2015 Optics and photonics - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide (ISO 9022-20:2015)
  • DIN 51855-6:2000-09 Testing of gaseous fuels and other technical gases - Determination of sulfur compounds content - Part 6: Content of hydrogen sulfide, mercaptan sulfur and carbonylsulfide sulfur; potentiometric method
  • DIN EN 15469:2008 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection; English version of DIN EN 15469:2008-02
  • DIN 38409-15:1987-06 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H); determination of hydrogen peroxide and its adducts (H 15)
  • DIN EN 15469:2008-02 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection; German version EN 15469:2007
  • DIN 51777-2:1974 Testing of Mineral Oil Hydrocarbons and Solvents; Determination of Water Content according to Karl Fischer; Indirect Method
  • DIN 51422-1:1989 Testing of mineral oil hydrocarbons and similar liquids; determination of the grade of purity by gas-chromatography; n-heptane, iso-octane and toluene
  • DIN EN 1937:1999 Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures; German version EN 1937:1999

Professional Standard - Commodity Inspection, Test method for hydrogen bromide

  • SN 0524-1996 Method for the determination of bromide residues in cereals for export
  • SN/T 0801.7-1999 Animal and vegetable oils and fats for import and export.Method for the determination of insoluble polybromides matter
  • SN 0202-1993 Method for determination of inorganicbromide residues in fruits for export
  • SN/T 0621-1996 Method for the determination of hydrocarbon in beesmax for export
  • SN/T 0621-2013 Determination of hydrocarbon in beeswax for export
  • SN/T 0213.3-1993 Method for determination of chlordimeform residuesin honey for export.Bromination-gas chromatography
  • SN 0353-1995 Method for the determination of carbon disulfide,carbon tetrachloride and ethylenedibromide residues
  • SN 0700-1997 Method for the determiation of hydrocortisone residues in milk and milk products for export
  • SN/T 2005.3-2006 Determination of polybromobiphenyls and polybromobiphenyl in electrical and electronic equipment - Part 3: GC-FID method
  • SN/T 0481.11-2011 Inspection of bauxite for import and export.Part 11:Determination of titanium dioxide content.Hydrogen peroxide spectrophotometric method
  • SN/T 0736.6-1999 Chemical analysis of fertilizers for import and export.Determination of phosphorus content
  • SN/T 0736.7-1999 Chemical analysis of fertilizers for import and export.Determination of potassium content
  • SN/T 0736.2-1997 Method of inspection for import and export fertilizers.Determination of moisture
  • SN/T 0736.3-1997 Method of inspection for import and export fertilizers.Determination of granule size
  • SN/T 0736.5-1999 Chemical analysis of fertilizers for import and export.Determination of nitrogen content
  • SN/T 0736.9-1999 Chemical analysis of fertilizers for import and export.Determination of choride ion content
  • SN/T 0736.10-1999 Chemical analysis of fertilizers for import and export.Determination of free acid content
  • SN/T 0736.8-1999 Chemical analysis of fertilizers for import and export.Determination of biuret content
  • SN/T 0736.6-2010 Chemical analysis of fertilizers for import and export.Part 6:Determination of phosphorus
  • SN/T 0857-2000 Method for the determination of sulfur dioxide in beer for import and export.Spectrophotometry
  • SN/T 3823-2014 Determination of polycyclic aromatic hydrocarbons in cosmetic.Gas chromatography-mass spectrometry method
  • SN/T 0736.2-2011 Test method of import and export fertilizers.Part 2:Determination of moisture
  • SN/T 0736.3-2011 Test method of import and export fertilizers.Part 3:Determination of granule size
  • SN/T 0736.7-2010 Test method for import and export fertilizers.Part 7:Determination of potassium content
  • SN/T 0736.10-2013 Test method of import and export fertilizers.Part 10:Determination of free acid
  • SN/T 0736.5-2010 Test method of import and export fertilizers.Part 5: Determination of nitrogen content
  • SN/T 0736.9-2010 Test method of import and export fertilizers.Part 9:Determination of chloride content
  • SN/T 0759.1-1999 Chemical analysis of imported & exported fertitizers.The atomic absorption spectrophotometric method for the determination of trace elements content
  • SN/T 2497.18-2010 Test method of import and export dangerous chemicals-Part 18: Detection method of DNA adduct

Professional Standard - Chemical Industry, Test method for hydrogen bromide

  • HG/T 3881-2006 Analysis methods for mixed aqueous catalyst of Cobalt acetate, Manganese acetate and Hydrobromic acid

Professional Standard - Geology, Test method for hydrogen bromide

  • DZ/T 0064.46-1993 Determination of Bromide by Phenol Red Colorimetric Method for Groundwater Quality Examination
  • DZ/T 0064.11-1993 Groundwater quality testing method Determination of arsenic by gas-liquid separation hydride atomic fluorescence method

American Society for Testing and Materials (ASTM), Test method for hydrogen bromide

  • ASTM D6505-00(2006) Standard Test Method for Assay of normal-Propyl Bromide Content
  • ASTM D6505-00 Standard Test Method for Assay of normal-Propyl Bromide Content
  • ASTM D5578-94(1999)e1 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
  • ASTM D7773-12 Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography
  • ASTM D6505-00(2012) Standard Test Method for Assay of normal-Propyl Bromide Content
  • ASTM D6505-00(2017) Standard Test Method for Assay of normal-Propyl Bromide Content
  • ASTM D1246-05 Standard Test Method for Bromide Ion in Water
  • ASTM D1246-10 Standard Test Method for Bromide Ion in Water
  • ASTM B577-93(2004) Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • ASTM B577-19 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • ASTM D7675-11 Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer
  • ASTM E234-98 Standard Test Method for Total Bromine Number of Unsaturated Aliphatic Chemicals
  • ASTM E234-98(2003)e1 Standard Test Method for Total Bromine Number of Unsaturated Aliphatic Chemicals
  • ASTM E291-96 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
  • ASTM E291-01 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
  • ASTM E538-17 Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
  • ASTM E538-17a Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
  • ASTM E538-98(2008) Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
  • ASTM D3765-99 Standard Test Method for Carbon Black-CTAB (Cetyltrimethylammonium Bromide) Surface Area
  • ASTM D4810-06(2011) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM E291-04 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
  • ASTM E291-09 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
  • ASTM E291-18 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
  • ASTM D2420-23 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM D4810-06(2015) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D2710-09(2013) Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
  • ASTM D2420-12 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM D2420-13 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM E538-98(2003)e1 Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
  • ASTM E538-98 Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
  • ASTM D1016-89 Standard Test Method for Purity of Hydrocarbons from Freezing Points
  • ASTM D1016-05e2 Standard Test Method for Purity of Hydrocarbons from Freezing Points
  • ASTM E2037-99 Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
  • ASTM E2037-01 Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
  • ASTM E2037-15 Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
  • ASTM D3869-04 Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
  • ASTM D3869-09 Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
  • ASTM D2710-09(2018) Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
  • ASTM D2710-20 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
  • ASTM D7644-10e2 Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • ASTM D6581-18 Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
  • ASTM D7458-21 Standard Test Method for Determination of Beryllium in Soil and Sediment Using Ammonium Bifluoride Extraction and Fluorescence Detection
  • ASTM D5705-14 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
  • ASTM D5705-03(2008) Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
  • ASTM B577-10 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • ASTM D1015-99(2004) Standard Test Method for Freezing Points of High-Purity Hydrocarbons
  • ASTM D1109-21 Standard Test Method for 1 % Sodium Hydroxide Solubility of Wood
  • ASTM E2037-07 Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
  • ASTM D3765-03 Standard Test Method for Carbon Black8212;CTAB (Cetyltrimethylammonium Bromide) Surface Area
  • ASTM D3765-03a Standard Test Method for Carbon Black8212;CTAB (Cetyltrimethylammonium Bromide) Surface Area
  • ASTM D3869-95(1999) Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
  • ASTM D3869-15(2023) Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
  • ASTM D3765-04 Standard Test Method for Carbon Black-CTAB (Cetyltrimethylammonium Bromide) Surface Area
  • ASTM D6021-96(2001)e1 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
  • ASTM D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
  • ASTM D3908-03(2008) Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
  • ASTM E1787-16 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
  • ASTM D5705-03 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
  • ASTM D5705-12 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
  • ASTM D6581-00 Standard Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography
  • ASTM D6581-00(2005) Standard Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography
  • ASTM D4323-21 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
  • ASTM D1696-95(2000) Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
  • ASTM D3921-96 Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
  • ASTM F326-96(2006) Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
  • ASTM D1696-95(2006) Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
  • ASTM F326-17 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
  • ASTM D3921-96(2003)e1 Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
  • ASTM F326-96(2012) Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
  • ASTM E1787-96 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
  • ASTM E1787-02 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
  • ASTM D7833-20 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
  • ASTM E1787-08 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
  • ASTM D6069-01(2006) Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
  • ASTM D6069-96 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
  • ASTM D6069-01 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
  • ASTM D7807-12 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
  • ASTM D4323-84(2003) Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
  • ASTM D3765-02 Standard Test Method for Carbon Black—CTAB (Cetyltrimethylammonium Bromide) Surface Area
  • ASTM D3908-03(2015) Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
  • ASTM D854-06 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
  • ASTM D3908-99 Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method
  • ASTM B577-93(1998) Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • ASTM D2784-98 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
  • ASTM B577-16 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • ASTM D5705-15 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
  • ASTM D5705-13 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
  • ASTM D7621-10 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7423-23 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • ASTM D6845-22 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
  • ASTM D4810-06 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4810-88(1999) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4810-20 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D7652-11 Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection
  • ASTM D1159-98 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
  • ASTM D8280-20 Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
  • ASTM D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
  • ASTM D6378-18a Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
  • ASTM D6378-20 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
  • ASTM D6378-18 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
  • ASTM D6378-10(2016) Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
  • ASTM D4606-95(2000) Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
  • ASTM D1109-84(2001) Standard Test Method for 1% Sodium Hydroxide Solubility of Wood
  • ASTM F1113-87(2011) Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
  • ASTM D1109-84(2013) Standard Test Method for 1?% Sodium Hydroxide Solubility of Wood
  • ASTM D853-97(2001) Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
  • ASTM D853-03 Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
  • ASTM D853-04 Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
  • ASTM D2784-06 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
  • ASTM F1113-87(2005)e1 Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
  • ASTM D4308-95(2000) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D4308-95 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D1342-92(1996) Standard Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax
  • ASTM D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D4423-23 Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons
  • ASTM D1342-92(2002) Standard Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax
  • ASTM D2784-11 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
  • ASTM D7358-07 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
  • ASTM D7358-07(2013) Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
  • ASTM D6845-20 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
  • ASTM D6845-18 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
  • ASTM D7621-12 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D853-97 Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
  • ASTM F1940-01 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
  • ASTM F1940-99 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
  • ASTM D6845-02 Standard Test Method for Silica, Precipitated, Hydrated8212;CTAB (Cetyltrimethylammonium Bromide) Surface Area
  • ASTM E2009-08 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
  • ASTM E2009-99 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
  • ASTM E1858-23 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
  • ASTM E2792-21 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
  • ASTM E475-16 Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
  • ASTM D7621-16(2021) Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D4367-22 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography
  • ASTM D7621-15 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM E1210-99 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Hydrophilic Post-Emulsification Process
  • ASTM E1210-21 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
  • ASTM D7634-10 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
  • ASTM D3908-03 Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method
  • ASTM F1113-87(1999) Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
  • ASTM D6646-03(2008) Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
  • ASTM D3921-96(2011) Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
  • ASTM D2784-92 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
  • ASTM D2784-98(2003)e1 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
  • ASTM F519-97e2 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating Processes and Service Environments
  • ASTM D2784-89 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
  • ASTM F519-18 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating Processes and Service Environments
  • ASTM F1459-06(2012) Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
  • ASTM E298-08 Standard Test Methods for Assay of Organic Peroxides
  • ASTM D7458-14 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
  • ASTM D7892-22 Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
  • ASTM F1404-92(1999) Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique
  • ASTM D4084-05 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
  • ASTM D4084-07 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
  • ASTM D4084-06 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
  • ASTM D4084-94(1999) Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
  • ASTM D4084-82(1988) Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
  • ASTM D4084-07(2012) Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
  • ASTM D4084-07(2017) Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
  • ASTM D4606-21 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
  • ASTM D7621-13 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7621-14 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7621-15a Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7621-16 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D4084-23 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
  • ASTM C1324-20 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
  • ASTM C1324-20a Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
  • ASTM F519-05 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating Processes and Service Environments
  • ASTM D6378-22 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
  • ASTM D4606-03(2007) Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
  • ASTM D4606-03 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
  • ASTM D8071-21 Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviol
  • ASTM D4606-15 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
  • ASTM E1208-99 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Lipophilic Post-Emulsification Process
  • ASTM D6356/D6356M-98(2018) Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
  • ASTM C1457-00(2010)e1 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
  • ASTM F1940-07 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
  • ASTM F1940-07a Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
  • ASTM F1404-92(2007) Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique
  • ASTM D7621-15b Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D6968-03 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
  • ASTM D6968-03(2009) Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
  • ASTM D6968-03(2015) Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
  • ASTM E1447-09(2016) Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
  • ASTM E316-11 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
  • ASTM E1447-09 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
  • ASTM E3351-22 Standard Test Method for Detection of Nitric Oxide Production In Vitro
  • ASTM F519-06 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
  • ASTM F519-06e2 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
  • ASTM F519-06e1 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
  • ASTM F519-08 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
  • ASTM F519-10 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
  • ASTM E77-66 Standard Method for Inspection, Test, And Standardization Of Liquid-in-Glass Thermometers
  • ASTM D5902-96(2001) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D5902-96 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D5902-05 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D5902-05e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D6356-98(2004) Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
  • ASTM D6356-98 Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
  • ASTM E1447-05 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
  • ASTM D1442-06(2012) Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)
  • ASTM D1442-06(2019) Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)
  • ASTM D7358-07(2018) Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
  • ASTM D8519-23 Standard Test Method for Determination of Hydrocarbon Types in Waste Plastic Process Oil Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
  • ASTM C1457-00 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
  • ASTM C1457-18 Standard Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
  • ASTM D2593-23 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
  • ASTM D1840-07(2017) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM C1324-04 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
  • ASTM C1324-03 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
  • ASTM C1457-00(2005) Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
  • ASTM D5902-05(2019) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D6646-01 Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
  • ASTM D6646-03 Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
  • ASTM D6356/D6356M-98(2011)e1 Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
  • ASTM D6363-98(2009)e1 Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
  • ASTM F2617-08e1 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
  • ASTM D5670-95(2000)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM C1324-15 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
  • ASTM E28-14 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
  • ASTM D6646-03(2014) Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
  • ASTM D6646-03(2022) Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
  • ASTM E316-00(2005) Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titration
  • ASTM E316-00 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titration
  • ASTM D6229-06(2010) Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
  • ASTM D6363-98(2013) Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
  • ASTM D6839-18 Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
  • ASTM D5808-95 Standard Test Method for Determining Organic Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
  • ASTM D2163-07 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
  • ASTM D2163-91(1996) Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography
  • ASTM D2163-23 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
  • ASTM D2163-23e1 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
  • ASTM D2163-14(2019) Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
  • ASTM F2617-15 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
  • ASTM D8396-22 Standard Test Method for Group Types Quantification of Hydrocarbons in Hydrocarbon Liquids with a Boiling Point between 36 °C and 343 °C by Flow Modulated GCxGC – FID
  • ASTM D6363-98(2003)e1 Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
  • ASTM D6363-98 Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
  • ASTM D5902-05(2010) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D4056-21 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
  • ASTM D3703-18 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
  • ASTM C1854-17 Standard Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide ((U, Pu)O2) Sintered Pellets by the Inert Gas Fusion Technique Followed by Thermal Conductivity Me
  • ASTM D4129-05(2020) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D7493-08 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
  • ASTM D2505-88(1998) Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
  • ASTM D6447-03 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
  • ASTM D2504-67 Standard Method Of Test For Noncondensable Gases In C3 And Lighter Hydro-Carbon Products By Gas Chromatography
  • ASTM D6447-09(2014) Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
  • ASTM E1763-98 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
  • ASTM E1763-98(2003) Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
  • ASTM D6313-99 Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry
  • ASTM D5902-05(2023) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM G108-23 Standard Test Methods for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
  • ASTM F1940-07a(2019) Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
  • ASTM C457/C457M-10a Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
  • ASTM E475-10 Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
  • ASTM D4629-02(2007) Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
  • ASTM D4629-02 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
  • ASTM D4944-98 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester Method
  • ASTM D7923-17 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
  • ASTM D2503-82(1987)e1 Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D7923-17ae1 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration

Indonesia Standards, Test method for hydrogen bromide

  • SNI 19-6036-1999 Test method for hydrogen peroxide (H2O2) in waste water
  • SNI 14-4935-1998 Test method for bleaching chemicals of pulp (chlorine, chlorine oxide, sodium hypochlorite, sodium hydroxide and hydrogen peroxide)
  • SNI 19-7117.8-2005 Exhaust gas emissions - Stationary sources - Part 8: Test methods of hydrogen chloride (HCl) content by mercury thiocyanate using spectrophotometers

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test method for hydrogen bromide

  • GB/T 14074.14-1993 Test methods for wood adhesives and their resins can be replaced by bromide determination method
  • GB/T 8151.7-2012 Methods for chemical analysis of zinc concentrates.Part 7:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry and the potassium bromate titrimetric method
  • GB/T 11742-1989 Standard method for hygienic examination of hydrogen sulfide in air of residential areas--Methylene blue spectrophotometric method
  • GB/T 21294-2014 Testing methods of physical and chemical performance of garments
  • GB/T 21294-2007 Testing method of the garments’intrinsic quality
  • GB/T 11064.13-2013 Methods for chemical analysis of lithium carbonate, lithium hydroxide monohydrate and lithium chloride.Part 13:Determination of aluminum content.Chromazurol S-cetylpyridine bromide spectrophotometric method
  • GB/T 4372.6-2001 Methods for chemical analysis of zinc oxide produced by direct process--Methods for chemical analysis of zinc oxide made by direct process--Test of metallic zinc
  • GB/T 11213.7-2008 Test methods of sodium hydroxide for chemical fiber use.Part7:Determination of copper content.Spectrometric method
  • GB/T 15972.55-2009 Specification for optical fibre test methods.Part 55:Measurement methods and test procedures for enviromental characteristics.Hydrogen aging
  • GB/T 13531.1-2000 General methods on determination of cosmetics-Determination of pH
  • GB/T 13531.1-2008 General methods on determination of cosmetics.Determination of pH
  • GB/T 8037-2009 Benzol products of coal carbonization-Test for presence of mercap tans
  • GB/T 8037-1987 Benzol products of coal carbonization--Test for presence of mercaptans
  • GB/T 2423.20-2014 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections
  • GB/T 4058-1995 Test method for detection of oxidation induced defects in polished silicon wafers
  • GB/T 4058-2009 Test method for detection of oxidation induced defects in polished silicon wafers
  • GB/T 11200.2-2008 Test methods of high-purity sodium hydroxide.Part2:Determination of aluminium oxide content.Spectrometric method
  • GB/T 13531.4-2013 General methods on determination of cosmetics.Determination of relative density
  • GB/T 4372.6-2014 Methods for chemical analysis of zincoxide produced by direct process.Part 6:Testing of metallic zinc
  • GB/T 2424.12-2014 Environmental testing.Part 2:Test methods.Guidance to test Kd:Hydrogen sulphide test for contacts and connections
  • GB/T 12085.20-2022 Optics and photonics—Environmental test methods—Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide
  • GB/T 11200.3-2008 Test methods of high-purity sodium hydroxide.Part3:Determination of calcinm content.Flame atomic absorption method
  • GB/T 3884.9-2012 Methods for chemical analysis of copper concentrates.Part 9:Determination of arsenic and bismuth contents.Hydride generation-atomic fluorescence spectrometry method The potassium bromate titration method and The silver diethyl dithiocarbamate photometric
  • GB/T 12085.20-2011 Optics and optical instruments.Enviromental test methods.Part 20:Humid atmosphere containing sulfur dioxide or hydrogen sulfide
  • GB/T 2423.20-1981 Electric and electronic products--Basic environmental test regulations for electricians--Test Kd:The hydrogen sulfide method at the point of contact and the connecting element
  • GB/T 12372-1990 Standard method for examination of nitrogen dioxide in air of residential areas--Modified Saltzman method

Japanese Industrial Standards Committee (JISC), Test method for hydrogen bromide

Korean Agency for Technology and Standards (KATS), Test method for hydrogen bromide

  • KS M 0180-2009 Standard test method for halogen(F, Cl, Br) and sulfur content by oxidative pyrohydrolytic combustion followed by ion chromatography detection (Combustion ion chromatography-CIC)
  • KS M ISO 8819-2003(2018)
  • KS I 9203-2008 Testing methods of industrial hydro carbon cleaning agent
  • KS M 7047-2000(2005) TESTING METHOD FOR 1% NAOH SOLUBILITY OF PULP
  • KS M 7047-1985 TESTING METHOD FOR 1% NAOH SOLUBILITY OF PULP
  • KS M 7058-2002(2007) Testing method for 1% sodium hydroxide solubility in raw materials of pulp
  • KS M 7058-1982 Testing method for 1% sodium hydroxide solubility in raw materials of pulp
  • KS C 0246-2001 Basic environmental testing procedures Part 2:Tests-test Kd: Hydrogen sulphide test for contacts and connections
  • KS D ISO 7087:2003 Ferroalloys-Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
  • KS M ISO 1388-10-2017(2022) Ethanol for industrial use — Methods of test — Part 10: Estimation of hydrocarbons content — Distillation method
  • KS M 1033-2017(2022) Testing method for density of high-purity hydrocarbons by Bingham pycnometer
  • KS E ISO 8542:2003 Manganese and chromium ores-Experimental methods for evaluation of quality variation and methods for checking the precision of sampling
  • KS M ISO 10349-3-2002(2017) Photography-Photographic-grade chemicals-Test methods-Part 3:Determination of matter insoluble in ammonium hydroxide solution
  • KS M ISO 10349-3-2002(2022) Photography-Photographic-grade chemicals-Test methods-Part 3:Determination of matter insoluble in ammonium hydroxide solution
  • KS M 2068-1987(1997) TESTING METHOD FOR EMULSION CHARACTERISTICS OF PETROLEUM OIL AND SYNTHETIC FLUIDS
  • KS M 2068-1987 TESTING METHOD FOR EMULSION CHARACTERISTICS OF PETROLEUM OIL AND SYNTHETIC FLUIDS
  • KS B ISO 9022-20:2002 Optics and optical instruments-Environmental test methods-Part 20:Humid atmosphere containing sulfur dioxide or hydrogen sulfide
  • KS B ISO 9022-20-2017(2022) Optics and optical instruments-Environmental test methods-Part 20:Humid atmosphere containing sulfur dioxide or hydrogen sulfide
  • KS B ISO 9022-20:2017 Optics and optical instruments-Environmental test methods-Part 20:Humid atmosphere containing sulfur dioxide or hydrogen sulfide
  • KS M 0070-2017 Testing methods for co1our of chemical products and colour after treatment with sulfuric acid
  • KS M 2078-2013(2018) Test method for the determination of hydrocarbons and dimethyl ether(DME) in liquefied petroleum gases(LPG) and LPG — DME mixtures by gas chromatography(GC)

GM Daewoo, Test method for hydrogen bromide

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test method for hydrogen bromide

  • GB/T 33417-2016 Test method of biological indicator for hydrogen peroxide vapour sterilization processes
  • GB/T 13531.7-2018 General methods on determination of cosmetics—Determination of refractive index
  • GB/T 4157-2017 Laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion cracking in H2S environment
  • GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size
  • GB/T 35827-2018 General methods on determination of cosmetics—Identification of the emulsion type (w/o or o/w)

BE-NBN, Test method for hydrogen bromide

  • NBN T 63-152-1983 Cationic surface active agents (hydrochlorides and hydrobromides) - Determination of critical micellization concentration - Method by measurement of counter ion activity
  • NBN B 13-202-1976

HU-MSZT, Test method for hydrogen bromide

Professional Standard - Non-ferrous Metal, Test method for hydrogen bromide

  • YS/T 521.3-2009 Methods for chemical analysis of blister copper.Part 3:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometric method.Potassium bromate titration
  • YS/T 1115.14-2016 Methods for chemical analysis of copper ores and tailings.Part 14:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometric and potassium bromate titrimetric method
  • YS/T 990.8-2014 Methods for chemical analysis of copper matte.Part 8:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry、silver diethyldithiocarbamate spectrophotometry and potassium bromate titrimetry

National Health Commission of the People's Republic of China, Test method for hydrogen bromide

  • GB 23200.44-2016 National food safety standards— Determination of carbon disulfide、carbon tetrachloride and ethylene dibromide residues in cereals

Association Francaise de Normalisation, Test method for hydrogen bromide

  • NF T73-414:1983 Surface active agents. Cationic surface active agents (hydrochlorides and hydrobromides). Determination of critical micellization concentration. Method by measurement of counter ion activity.
  • NF P20-518:1984 Methods of testing doors. Test for the change in stiffness of the door leaves by repeated torsion.
  • NF EN 13880-8:2018 Produits de scellement de joints appliqués à chaud - Partie 8 : méthode d'essai pour la détermination de la variation de masse selon leur résistance aux hydrocarbures de produits de scellement de joints après immersion dans des hydrocarbures
  • NF L10-808*NF EN 3976:2007 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
  • NF M41-005*NF EN 15469:2008 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection
  • NF M62-206:1984 Nuclear energy. Nuclear ventilation installations. Method of control of the scrubbing coefficient of iodine trap.
  • NF S57-037-9*NF ISO 22863-9:2021 Fireworks - Test methods for determination of specific chemical substances - Part 9 : mercury content by hydride generation atomic fluorescence spectrometry
  • NF S57-037-8*NF ISO 22863-8:2021 Fireworks - Test methods for determination of specific chemical substances - Part 8 : arsenic content by hydride generation atomic fluorescence spectrometry

AENOR, Test method for hydrogen bromide

  • UNE 55802:1985 SURFACE ACTIVE AGENTS. CATIONIC SURFACE ACTIVE AGENTS (HYDROCHLORIDES AND HYDROBROMIDES). DETERMINATION OF CRITICAL MICELLIZATION CONCENTRATION. METHOD BY MEASUREMENT OF COUNTER ION ACTIVITY

VN-TCVN, Test method for hydrogen bromide

  • TCVN 3796-1983 Sodium hydroxide technical.Method of test for sodium chloride content
  • TCVN 3801-1983 Sodium hydroxide technical.Method of test for heavy metal
  • TCVN 3798-1983 Sodium hydroxide technical.Method of test for sodium chlorate content
  • TCVN 3799-1983 Sodium hydroxide technical.Method of test for sodium sulfate content
  • TCVN 3800-1983 Sodium hydroxide technical.Method of test calcicum and magnesium contents
  • TCVN 3795-1983 Sodium hydroxide technical.Method of test sodium hydroxide, total of alkaline and sodium carbonate contents

国家质量监督检验检疫总局, Test method for hydrogen bromide

  • SN/T 4395-2015 Detection method for phosphine residues in exported foods Gas chromatography

工业和信息化部, Test method for hydrogen bromide

  • YS/T 445.3-2019 Methods for chemical analysis of silver concentrates Part 3: Determination of arsenic content Hydride generation-atomic fluorescence spectrometry and potassium bromate titration

中华人民共和国国家卫生和计划生育委员会, Test method for hydrogen bromide

  • GB 11742-1989 Standard method for hygienic examination of hydrogen sulfide in the atmosphere of residential areas methylene blue spectrophotometric method
  • GB 12372-1990 Improved Saltzman method of the standard method for the detection of nitrogen dioxide in the atmosphere of residential areas

British Standards Institution (BSI), Test method for hydrogen bromide

  • BS EN ISO 8819:1995 Methods of test for petroleum and its products. Liquefied petroleum gases. Detection of hydrogen sulfide. Lead acetate method
  • BS 7164 Sec.22.2:1992 Chemical tests for raw and vulcanized rubber. Methods for determination of bromine and chlorine content. Oxygen flask combustion technique for determination of bromine and chlorine
  • BS 7164-13:1994 Chemical tests for raw and vulcanized rubber - Method for determination of total hydrocarbon content
  • BS 7164-10:1994 Chemical tests for raw and vulcanized rubber - Method for preparation and examination of water extract
  • BS EN 725-12:2001 Advanced technical ceramics - Methods of test for ceramic powders - Chemical analysis of zirconia
  • BS ISO 12744:2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling
  • BS ISO 22863-8:2021 Fireworks. Test methods for determination of specific chemical substances. Arsenic content by hydride generation atomic fluorescence spectrometry
  • BS ISO 22863-9:2021 Fireworks. Test methods for determination of specific chemical substances. Mercury content by hydride generation atomic fluorescence spectrometry
  • BS EN 1165:1997 Feather and down - Test methods - Determination of water-soluble chlorides
  • BS 2000-272:2000 Methods of test for petroleum and its products - Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG) - Electrometric titration method
  • BS 2000-272:2002 Methods of test for petroleum and its products. Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method
  • BS ISO 9022-20:2015 Optics and photonics. Environmental test methods. Humid atmosphere containing sulfur dioxide or hydrogen sulfide
  • BS ISO 9022-20:1997 Optics and optical instruments - Environmental test methods - Humid atmosphere containing sulfur dioxide or hydrogen sulfide
  • BS EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection

Military Standard of the People's Republic of China-General Armament Department, Test method for hydrogen bromide

  • GJB 533.3-1988 Detection method for 45 components of submarine cabin air - Determination of hydrogen sulfide content Calibration tube method
  • GJB 533.8-1988 Detection method for 45 components of submarine cabin air - Determination of arsine content Calibration tube method
  • GJB 533.9-1988 Detection method for 45 components of submarine cabin air - Determination of hydrogen antimonide content Calibration tube method
  • GJB 533.13-1988 Detection method for 45 components of submarine cabin air - Determination of hydrogen chloride content Ring furnace method
  • GJB 533.12-1988 Detection methods for 45 components of submarine cabin air. Determination of hydrogen fluoride content. Ion-selective electrode method.
  • GJB 533.16-1988 Detection method for 45 components of submarine cabin air Colorimetric method for determination of alkaline aerosol (sodium hydroxide) content

BR-ABNT, Test method for hydrogen bromide

The American Road & Transportation Builders Association, Test method for hydrogen bromide

  • AASHTO T 59-2008 Standard Method of Test for Emulsified Asphalts
  • AASHTO T 185-2008 Standard Method of Test for Early Stiffening of Hydraulic Cement (Mortar Method)
  • AASHTO T 23-2008 Standard Method of Test for Making and Curing Concrete Test Specimens in the Field

American National Standards Institute (ANSI), Test method for hydrogen bromide

  • ANSI/ASTM D4323:1992 Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance

European Committee for Standardization (CEN), Test method for hydrogen bromide

  • HD 486 S1-1987 Test method for evaluating the oxidation stability of hydrocarbon insulating liquids
  • EN 3976:2006 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
  • EN 1165:1996 Feather and down - Test methods - Determination of water-soluble chlorides
  • EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection

RU-GOST R, Test method for hydrogen bromide

  • GOST R 8.916-2016 State system for ensuring the uniformity of measurements. Permeation tubes for Sulfur Dioxide, Hydrogen Sulfide, Nitrogen Dioxide, Chlorine, Hydrogen Chloride, Ammonia. Verification method
  • GOST R 22.9.15-2014 Safety in emergencies. Technical means of chemical detection. Test methods
  • GOST R 50065-1992 Ferroalloys. Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
  • GOST 28227-1989 Basic environmental testing procedures. Part 2. Tests. Test Kd: Hydrogen sulphide test for contacts and connections
  • GOST 28230-1989 Basic environmental testing. Part 2. Tests. Guidance to test Kd: Hydrogen sulphide test for contacts and connections

Group Standards of the People's Republic of China, Test method for hydrogen bromide

  • T/CCTA 20202-2022 Testing method of physical and chemical properties of natural color fabric
  • T/FDSA 003-2019 Test method of the process challenge device(PCD)during low-temperature plasma of hydrogen peroxide

Professional Standard - Public Safety Standards, Test method for hydrogen bromide

  • GA/T 1008.11-2013 GC and GC-MS examination methods for drugs.Part 11:Bromazepam
  • GA/T 930-2011 GC and chemistry examination methods for cyanogens ion in biology samples

Professional Standard - Machinery, Test method for hydrogen bromide

  • JB/T 3145-1982 Method of test for highly concentrated sulfureted hydrogen in silver electroplating layer and evaluation of test results
  • JB/T 10174-2008 Methods of quality inspection on shot-peening for steel-iron parts
  • JB/T 10174-2000 Methods of quality inspection on shot-peening for steel-iron parts

Professional Standard - Light Industry, Test method for hydrogen bromide

  • QB/T 3831-1999 Anti-color change corrosion testing method of the metal deposits and conversion coatings of the light industrial products.Hydrogen sulfide test

International Organization for Standardization (ISO), Test method for hydrogen bromide

  • ISO 1843-4:1977 Higher alcohols for industrial use; Methods of test; Part IV : Determination of bromine number; Titrimetric method in the presence of mercury(II) chloride
  • ISO 9022-20:2015 Optics and photonics - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide
  • ISO 10349-3:1992 Photography; photographic-grade chemicals; test methods; part 3: determination of matter insoluble in ammonium hydroxide solution
  • ISO 14104:2014 Gears - Surface temper etch inspection after grinding, chemical method
  • ISO 14104:2017 Gears - Surface temper etch inspection after grinding, chemical method
  • ISO 22863-8:2021 Fireworks - Test methods for determination of specific chemical substances - Part 8: Arsenic content by hydride generation atomic fluorescence spectrometry
  • ISO 22863-9:2021 Fireworks - Test methods for determination of specific chemical substances - Part 9: Mercury content by hydride generation atomic fluorescence spectrometry

Society of Automotive Engineers (SAE), Test method for hydrogen bromide

  • SAE J322-2014 Nonmetallic Trim Materials-Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
  • SAE J322-2003 Nonmetallic Trim MaterialsTest Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
  • SAE J322-1985 NONMETALLIC TRIM MATERIALS--TEST METHOD FOR DETERMINING THE STAINING RESISTANCE TO HYDROGEN SULFIDE GAS
  • SAE AMS2269F-2006 Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys [Superseded: SAE AMS 2268B]

SAE - SAE International, Test method for hydrogen bromide

  • SAE J322-1996 Nonmetallic Trim Materials-Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
  • SAE J322-1967 Nonmetallic Trim Materials - Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
  • SAE J322-2009 Nonmetallic Trim Materials—Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas

RO-ASRO, Test method for hydrogen bromide

KR-KS, Test method for hydrogen bromide

  • KS D ISO 7087-2003(2023) Ferroalloys-Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
  • KS B ISO 9022-20-2017 Optics and optical instruments-Environmental test methods-Part 20:Humid atmosphere containing sulfur dioxide or hydrogen sulfide
  • KS M 2078-2013(2023) Test method for the determination of hydrocarbons and dimethyl ether(DME) in liquefied petroleum gases(LPG) and LPG — DME mixtures by gas chromatography(GC)

Professional Standard - Civil Aviation, Test method for hydrogen bromide

  • MH/T 6039-2015 Standard test method for mechanical hydrogen embrittlement evaluation of plating processes and service environments
  • MH/T 6039-2006 Standard test method for mechanical hydrogen embrittlement evaluation of plating processes and service environments
  • MH/T 6039-2015(2017) Standard test method for mechanical hydrogen embrittlement evaluation of plating processes and service environments

PL-PKN, Test method for hydrogen bromide

  • PN Z04095 Arkusz 01-1974 Air purity protection Tests for carbon dioxide Determination of carbon dioxide work station by method with strontium hydroxide

IN-BIS, Test method for hydrogen bromide

Professional Standard - Agriculture, Test method for hydrogen bromide

  • 水产品质量安全检验手册 9.3.6.1-2005 Chapter IX Fishing Feed Inspection Section 3 Routine Physical and Chemical Testing Methods for Fishing Feed VI. Determination of Inorganic Arsenic in Fishing Feed (GBT 5009.11-2003) (1) Hydride Atomic Fluorescence Spectrometry
  • 175兽药典 三部-2015 Appendix Contents Reagents, Test Solution, Medium 3705 Aluminum Hydroxide Glue Preparation and Test Method of Physiological Saline Dilution

Malaysia Standards, Test method for hydrogen bromide

  • MS 875-2001 Method of test for sulphur in liquefied petroleum gases(Oxy-hydrogen burner or lamp)(First revision)

未注明发布机构, Test method for hydrogen bromide

  • BS 6075-12:1981(2011) Methods of Sampling and test for sodium hydroxide for industrial use — Part 12 : Determination of copper content
  • GJB 8793.9-2015 Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants Part 9: Determination of hydrogen Inert gas melting-infrared detection method
  • BS 6075-14:1981(2011) Methods of Sampling and test for sodium hydroxide for industrial use — Part 14 : Determination of matter insoluble in water
  • BS 7164-10:1994(1999) Chemical tests for raw and vulcanized rubber — Part 10 : Method for preparation and examination of water extract
  • BS 2000-272:2000(2010) Methods of test for petroleum and its products — BS 2000 - 272 : Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG) — Electrometric titration method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Test method for hydrogen bromide

  • GJB 5969.9-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 9: Determination of hydrogen by inert gas fusion.infrared absorption method

Professional Standard - Electron, Test method for hydrogen bromide

  • SJ 1281-1977 Test methods for thickness of metallic coatings and chemically treated layers
  • SJ 1278-1977 Inspection methods appearance of metallic coatings and chemically treated layers

IT-UNI, Test method for hydrogen bromide

European Association of Aerospace Industries, Test method for hydrogen bromide

  • AECMA PREN 3976-1999 Aerospace Series Titanium and Titanium Alloys Test Method Chemical Analysis for the Determination of Hydrogen Content Edition P 1

Danish Standards Foundation, Test method for hydrogen bromide

  • DS/EN 3976:2007 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content

Lithuanian Standards Office , Test method for hydrogen bromide

  • LST EN 3976-2007 Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
  • LST EN 61125-2001/A1-2004 Unused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability (IEC 61125:1992/A1:2004)

Professional Standard - Urban Construction, Test method for hydrogen bromide

  • CJ 26.10-1991 Determination of standard sulfide in urban sewage water quality inspection method
  • CJ 26.9-1991 Determination of Standard Cyanide in Municipal Sewage Water Quality Inspection Method

NL-NEN, Test method for hydrogen bromide

  • NEN-EN 196-21-1993 Methods of testing cement. Determination of the chloride, carbon dioxide and alkali content of cement

Standard Association of Australia (SAA), Test method for hydrogen bromide

  • AS 1012.14:1991 Methods of testing concrete - Method for securing and testing cores from hardened concrete for compressive strength

Compressed Gas Association (U.S.), Test method for hydrogen bromide

  • CGA C-6.4-2007 METHODS FOR EXTERNAL VISUAL INSPECTION OF NATURAL GAS VEHICLE(NGV) AND HYDROGEN VEHICLE(HV) FUEL CONTAINERS AND THEIR INSTALLATIONS THIRD EDITION

Aerospace, Security and Defence Industries Association of Europe (ASD), Test method for hydrogen bromide

  • ASD-STAN PREN 3976-1999 Aerospace Series Titanium and Titanium Alloys Test Method Chemical Analysis for the Determination of Hydrogen Content (Edition P 1)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved