ZH
RU
ES
Heat flow meter
Heat flow meter, Total:381 items.
In the international standard classification, Heat flow meter involves: Measurement of fluid flow, Linear and angular measurements, Protection of and in buildings, Energy and heat transfer engineering in general, Installations in buildings, Protection against fire, Electrical wires and cables, Thermodynamics and temperature measurements, Semiconductor devices, Equipment for petroleum and natural gas industries, Electrical engineering in general, Heat recovery. Thermal insulation, Wastes, Elements of buildings, Structures of buildings, Glass, Paints and varnishes, Construction materials, Automatic controls for household use, Space systems and operations, Aerospace engines and propulsion systems, Nuclear energy engineering, Testing of metals, Iron and steel products, Chipless working equipment, Ceramics, Domestic, commercial and industrial heating appliances, Internal combustion engines, Components for electrical equipment, Buildings, Metrology and measurement in general, Reinforced plastics, Plastics, Waxes, bituminous materials and other petroleum products, Power transmission and distribution networks, Bearings, Natural gas, Ferrous metals, Products of the textile industry, Cellular materials.
American National Standards Institute （ANSI), Heat flow meter
CZ-CSN, Heat flow meter
Professional Standard - Construction Industry, Heat flow meter
住房和城乡建设部, Heat flow meter
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Heat flow meter
Professional Standard - Urban Construction, Heat flow meter
AT-ON, Heat flow meter
- ONORM M 5921-1988 Heatmeters (meters for quantities of heat) for liquid heat carrier fluids; requirements for measurement
- ONORM M 5920-1988 Heatmeters (meters for quantities of heat) for liquid heat carrier fluids; general basic Information
- ONORM M 5922-1982 Heatmeters (meters for quantities of heat) for liquid carrier fluids; directives for dimensioning and installation
National Metrological Verification Regulations of the People's Republic of China, Heat flow meter
British Standards Institution (BSI), Heat flow meter
- BS IEC 60287-2-1:2023 Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance
- BS DD ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Guidance on the use of heat flux meters in fire tests
- BS IEC 60287-2-1+A2:1997 Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance
- BS IEC 60287-2-1:1994+A2:2006 Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance
- BS IEC 60287-2-1:2015 Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance
- BS ISO 14511:2002 Measurement of fluid flow in closed conduits. Thermal mass flowmeters
- BS ISO 14934-4:2014 Fire tests. Calibration and use of heat flux meters. Guidance on the use of heat flux meters in fire tests
- BS 7769-2.1:1997 Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance
- BS EN 1934:1998 Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry
- BS ISO 9869-1:2014 Thermal insulation. Building elements. $iI$i n-$is$ii$it$iu measurement of thermal resistance and thermal transmittance. Heat flow meter method
- BS EN 675:1998 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
- BS EN ISO 10211:2009 Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations
- BS EN ISO 10211:2007 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- PD CEN/CLC/TR 17603-31-13:2021 Space Engineering. Thermal design handbook. Fluid Loops
- BS 7454:1991+A1:2008 Method for calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- BS EN 675:2011 Glass in building. Determination of thermal transmittance (U value). Heat flow meter method
- BS ISO 14511:2019 Tracked Changes. Measurement of fluid flow in closed conduits. Thermal mass flowmeters
- BS PD CEN/CLC/TR 17603-31-13:2021 Space Engineering. Thermal design handbook. Fluid Loops
- BS EN 17526:2021 Gas meter. Thermal-mass flow-meter based gas meter
- 21/30431015 DC BS EN 60287-2-1. Electric cables. Calculation of the current rating. Part 2-1. Thermal resistance. Calculation of the thermal resistance
- BS 7454:1991 Method for calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- BS EN 12939:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
- BS EN 12939:2001(2002) Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
- BS PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
- BS EN ISO 10211:2017 Tracked Changes. Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations
- BS EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
- 20/30407324 DC BS EN 17526. Gas meters. Thermal-mass flow-meter based gas meter
- BS EN ISO 10211-1:1996 Thermal bridges in building construction - Heat flows and surface temperatures - General calculation methods
- BS EN 13384-2:2003 Chimneys - Thermal and fluid dynamic calculation methods - Chimneys serving more than one heating appliance
- BS EN 13384-2:2003+A1:2009 Chimneys - Thermal and fluid dynamic calculation methods - Chimneys serving more than one heating appliance
- BS EN 13384-2:2015 Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving more than one heating appliance
- BS EN 13384-2:2015+A1:2019 Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving more than one heating appliance
- BS EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
- BS EN 12664:2001(2002) Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
- BS EN 13384-1:2002 Chimneys - Thermal and fluid dynamic calculation methods - Chimneys serving one appliance
- BS EN 13384-1:2002+A2:2008 Chimneys — Thermal
and fluid dynamic
calculation methods —
Part 1: Chimneys serving one appliance
- BS EN 13384-1:2015 Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving one heating appliance
- BS EN 13384-1:2015+A1:2019 Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving one heating appliance
- BS PD CEN/TR 15131:2006 Thermal performance of building materials — The use of interpolating equations in relation to thermal measurement on thick specimens — Guarded hot plate and heat flow meter apparatus
- BS IEC 60287-2-3:2017 Electric cables. Calculation of the current rating. Thermal resistance. Cables installed in ventilated tunnels
- BS EN 1946-3:1999 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Measurements by heat flow meter method
- BS EN 13384-3:2005 Chimneys - Thermal and fluid dynamic calculation methods - Methods for the development of diagrams and tables for chimneys serving one heating appliance
- BS ISO 6834:2022 Plain bearings. Thermo-hydrodynamic lubrication design charts for circular cylindrical bearings under steady-state conditions
- 22/30406196 DC BS ISO 16126. Space systems. Survivability of unmanned spacecraft against space debris and meteoroid impacts for the purpose of space debris mitigation
- BS ISO 20765-2:2015 Natural gas. Calculation of thermodynamic properties. Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application
- BS IEC 60287-3-3:2007 Electric cables - Calculation of the current rating - Sections on operating conditions - Cables crossing external heat sources
- 22/30439287 DC BS ISO 6834. Plain bearings. Thermo-hydrodynamic lubrication design charts for circular cylindrical bearings under steady-state conditions
- BS EN ISO 12115:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life
- BS EN 15316-3-1:2007 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Domestic hot water systems, characterisation of needs (tapping requirements)
- BS 7769-2.2:1997 Electric cables. Calculation of the current rating. Thermal resistance. A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
- BS EN ISO 20765-2:2018 Natural gas. Calculation of thermodynamic properties. Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application
American Society of Mechanical Engineers (ASME), Heat flow meter
- ASME MFC-21.2-2010(R2018) Measurement of Fluid Flow by Means of Thermal Dispersion Mass Flowmeters
- ASME MFC-21.2-2010 Measurement of Fluid Flow by Means of Thermal Dispersion Mass Flowmeters
- ASME MFC-21.1-2015 Measurement of Gas Flow by Means of Capillary Tube Thermal Mass Flowmeters and Mass Flow Controllers
- ASME MFC-21.1-2015(R2020) Measurement of Gas Flow by Means of Capillary Tube Thermal Mass Flowmeters and Mass Flow Controllers
- ASME V V 20-2009(R2021) Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer
- ASME V V 20-2009 Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer
SE-SIS, Heat flow meter
- SIS SS 02 42 11-1980 Thermal insulation — Determination of thermal resistance or thermal conductivity by means of a heat-flow meter
Danish Standards Foundation, Heat flow meter
- DS 1120:1981 Thermal insulation. Determination of thermal resistance or thermal conductivity by means of a heat-flow meter
- DS/EN 1934:1998 Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry
- DS/EN 675:2011 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
- DS/EN ISO 10211:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- DS/EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
- DS/EN 12939:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
- DS/EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
- DS/IEC 949:1990 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- DS/ISO 3150:1976 Radiators, convectors and similar appliances. Calculation of thermal output and presentation of results
- DS/CEN/TR 15131:2006 Thermal performance of building materials - The use of interpolating equations in relation to thermal measurement on thick specimens - Guarded hot plate and heat flow meter apparatus
- DS/EN 13384-2+A1:2009 Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance
- DS/EN 1946-3:1999 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method
- DS/EN 13384-1+A2:2008 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance
- DS/EN 13384-3:2006 Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance
American Society for Testing and Materials (ASTM), Heat flow meter
- ASTM E968-99 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM E511-01 Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Gage
- ASTM E511-73(1994)e1 Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Gage
- ASTM E511-07(2015) Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
- ASTM E2584-07 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
- ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM E968-02 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM C518-04 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C518-10 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C518-02e1 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C518-02 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C518-98 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C518-21 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C518-91 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C1667-15 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
- ASTM D6744-01 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
- ASTM E1530-11 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
- ASTM D6744-06(2011)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
- ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C1132-95 Standard Practice for Calibration of the Heat Flow Meter Apparatus (Withdrawn 2002)
- ASTM E1530-04 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
- ASTM E1530-06 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
- ASTM C191-99 Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
- ASTM C191-01a Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
- ASTM D6744-06(2011) Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
- ASTM C1919-22 Standard Practice for Measurement of the Steady-State Thermal Transmission Properties of Small Specimens Using the Heat Flow Meter Apparatus
- ASTM D6744-06 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
- ASTM D6744-06(2017)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
- ASTM C1784-14 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
- ASTM A697/A697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
- ASTM E1530-19 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
- ASTM C1784-13 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
- ASTM D1238-90b Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1238-85 Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1238-04 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1238-04a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1238-04c Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1238-01e1 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1238-00 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM C1784-20 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
- ASTM D1238-20 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1238-23 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1238-13 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D5422-00 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
- ASTM D1238-10 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM E3057-19 Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
- ASTM D7605-11 Standard Test Method for Thermoplastic ElastomersMeasurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
Korean Agency for Technology and Standards (KATS), Heat flow meter
- KS C 6564-2002 Test methods of hot-film flow sensors
- KS B ISO 14511-2014(2019) Measurement of fluid flow in closed conduits — Thermal mass flowmeters
- KS C IEC 60949-2004(2019) Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- KS B ISO 14511:2004 Measurement of fluid flow in closed conduits-Thermal mass flowmeters
- KS B ISO 14511:2014 Measurement of fluid flow in closed conduits — Thermal mass flowmeters
- KS L ISO 8301:2006 Thermal insulation－Determination of steady-state thermal resistance and related properties－Heat flow meter apparatus
- KS C IEC 60287-2-1:2022 Electric cables — Calculation of the current rating — Part 2-1: Thermal resistance — Calculation of the thermal resistance
- KS C IEC 60287-2-1:2019 Electric cables — Calculation of the current rating — Part 2-1: Thermal resistance — Calculation of the thermal resistance
- KS L ISO 8301-2006(2016) Thermal insulation－Determination of steady-state thermal resistance and related properties－Heat flow meter apparatus
- KS C IEC 60287-2-1:2008 Electric cables-Calculation of the current rating-Part 2-1:Thermal resistance-Calculation of thermal resistance
- KS B ISO 3150-2005(2010) Radiators, convectors and similar appliances－Calculation of thermal output and presentation of results
- KS C IEC 60949:2004 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- KS B ISO 3150:2005 Radiators, convectors and similar appliances-Calculation of thermal output and presentation of results
- KS M 2259-1980(2020) Testing method for rolling thin - film oven of asphalt(Effect of heat and air on moving film of asphalt)
- KS M ISO 12115:2002 Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of flowability, maturation and shelf life
- KS C IEC 60287-3-3-2014(2019) Electric cables — Calculation of the current rating — Part 3-3: Sections on operating conditions — Cables crossing external heat sources
- KS C IEC 60287-3-3:2014 Electric cables — Calculation of the current rating — Part 3-3: Sections on operating conditions — Cables crossing external heat sources
Professional Standard - Machinery, Heat flow meter
- JB/T 10181.21-2014 Electric cables.Calculation of the current rating.Part 21: Thermal resistance.Calculation of thermal resistance
- JB/T 10181.3-2000 Calculation of the current rating of electric cables.Part 2:Thermal resistance.Section 1:Calculation of thermal resistance
- JB/T 11248-2012 Technical norm for convection radiator of composite metal fin tube
- JB/T 10181.22-2014 Electric cables.Calculation of the current rating.Part 22: Thermal resistance.A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
- JB/T 10181.4-2000 Calculation of the current rating of electric cables.Part 2:Thermal resistance.Section 2:A method for calculating reduction factors for groups of cables in free air,protected from solar fadiation
CN-STDBOOK, Heat flow meter
- 图书 A-4225 Thermal gas mass flowmeter, precession vortex flowmeter, hot water meter, water meter verification device
German Institute for Standardization, Heat flow meter
- DIN EN 1934:1998 Termal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry; German version EN 1934:1998
- DIN EN 675:2011-09 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method; German version EN 675:2011
- DIN EN ISO 10211:2018-03 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017); German version EN ISO 10211:2017
- DIN EN 1934:1998-04 Termal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry; German version EN 1934:1998
- DIN EN ISO 10211:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007); English version of DIN EN ISO 10211:2008-04
- DIN EN 17526:2020 Gas meters - Thermal-mass flow-meter based gas meter; German and English version prEN 17526:2020
- DIN EN 17526:2020-07 Gas meters - Thermal-mass flow-meter based gas meter; German and English version prEN 17526:2020 / Note: Date of issue 2020-05-29
- DIN EN 12667:2001-05 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance; German version EN 12667:2001
- DIN EN 12939:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance; German version EN 12939:2000
- DIN EN 12939:2001-02 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance; German version EN 12939:2000
- DIN EN 675:2011 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method; German version EN 675:2011
- DIN EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance; German version EN 12667:2001
- DIN EN 12664:2001-05 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance; German version EN 12664:2001
- DIN EN ISO 10211:2018 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017); German version EN ISO 10211:2017
- DIN EN 13384-1:2019-09 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating combustion; German version EN 13384-1:2015+A1:2019
- DIN EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance; German version EN 12664:2001
- DIN EN 13384-1:2019 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating combustion (includes Amendment A1:2019)
- DIN EN 13384-1:2008 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance(includes Amendment A2:2008); English version of DIN -EN 13384-1:2008-08
- DIN EN ISO 12115:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997
- DIN EN 13384-1:2015 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance; German version EN 13384-1:2015
- DIN EN 13384-2:2015 Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance; German version EN 13384-2:2015
- DIN EN 13384-2:2019-09 Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one combustion appliance; German version EN 13384-2:2015+A1:2019
- DIN EN 1946-3:1999-04 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by the guarded heat flow meter method; German version EN 1946-3:1999
Chongqing Provincial Standard of the People's Republic of China, Heat flow meter
ESDU - Engineering Sciences Data Unit, Heat flow meter
- ESDU 86022 A-1988 High-fin staggered tube banks: heat transfer and pressure drop for turbulent single phase gas flow.
- ESDU 84016 B-1988 Low-fin staggered tube banks: heat transfer and pressure loss for turbulent single-phase crossflow.
- ESDU 96027 A-1997 Estimation of the unsteady lift coefficient of subsonic propeller blades in non-axial inflow.
- ESDU 97007-1998 Heat transfer enhancement in heat exchanger design and utilisation. Part 1. Tube inserts in single-phase flow.
- ESDU 82021 A-1983 Pressure loss and heat transfer for single-phase turbulent flow in roughened channels: methods of calculation.
SAE - SAE International, Heat flow meter
- SAE AIR1667-1989 Rotor Blade Electrothermal Ice Protection Design Considerations
Society of Automotive Engineers (SAE), Heat flow meter
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Heat flow meter
- ASHRAE 3774-1994 Longitudinal Fin Conduction in Multipass Cross-Counterflow Finned-Tube Heat Exchangers
- ASHRAE 4065-1997 Convective Heat Transfer in Building Energy and Thermal load Calculations (RP 664)
- ASHRAE MN-00-14-3-2000 Computational Study of Heat Transfer and Friction Characteristics of a Smooth Wavy Fin Heat Exchanger
- ASHRAE MN-00-14-2000 Symposium on the Use of Computational Fluid Dymanics in Heat-Exchanger Design
- ASHRAE CI-01-4-2001 Symposium on Use of Computational Fluid Dynamics in Heat Exchanger Design
- ASHRAE SF-98-21-2-1998 Design of Cross-Flow Condensers for Ammonia-Water Absorption Heat Pumps
- ASHRAE 4435-2001 Experimental Determination of the Effects of Turbulence Intensity on the Performance of Rotating Vane Anemometers (RP-986)
- ASHRAE 41.9-2018 Standard Methods for Refrigerant Mass Flow Measurements Using Calorimeters
- ASHRAE AT-96-17-1-1996 Development of Design Model for a Rectifier in GAX Absorption Heat Pump Systems
- ASHRAE 41.9-1988 Standard Calorimeter Test Method for Flow Measurement of a Volatile Refrigerant
- ASHRAE 4422-2001 A Numerical Investigation for the Heat and Mass Transfer between Parallel Flow of Air and Desiccant Falling Film in a Fin-Tube Arrangement
- ASHRAE SF-98-20-3-1998 Impact of Natural Convection on the Accuracy of Low-Velocity Measurements by Thermal Anemometers with Omnidirectional Sensor
- ASHRAE 3773-1994 Surface Irregularity Effects of Droplets and Retained Condensate on Local Heat Transfer to Finned Tubes in Cross-Flow
- ASHRAE AT-96-17-3-1996 Improved Property Data Correlations of Absorption Fluids for Computer Simulation of Heat Pump Cycles
- ASHRAE 4593-2002 Uncertainty Analysis of the Experimental Results Investigating the Effects of Turbulence Intensity on the Performance of Rotating Vane Anemometers (RP-986)
IN-BIS, Heat flow meter
RU-GOST R, Heat flow meter
- GOST 28895-1991 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- GOST 31925-2011 Building materials and products of high and medium thermal resistance. Methods of determination of thermal resistance by means of guarded hot plate and heat flow meter
- GOST R 54467-2011 Thick building materials and products of high and medium thermal resistance. Methods for determination of thermal resistance by means of guarded hot plate and heat flow meter
- GOST R 54469-2011 Building materials and products of high and medium thermal resistance. Methods of determination of thermal resistance by means of guarded hot plate and heat flow meter
- GOST 31924-2011 Thick building materials and products of high and medium thermal resistance. Methods of determination of thermal resistance by means of guarded hot plate and heat flow meter
- GOST EN 675-2014 Glass and glass products. Thermal properties determination methods. Thermal resistance determination by heat flow meter method
- GOST R IEC 60287-2-1-2009 Electric cables. Calculation of the current rating. Part 2-1. Thermal resistance. Calculation of thermal resistance
- GOST R 54853-2011 Bulidings and structures. Method for determination of thermal resistance and thermal coefficient of enclosing structures wiht assistance of heat flow meter
- GOST R 52932-2008 Electromagnetic, ultrasonic, vortex and fluid oscillator counters for water heat supply systems. General specifications
- GOST R 57928-2017 Polymer composites. Method of determining the rate of heat release during combustion, using a flow calorimeter, operating on the principle of thermocouple
- GOST R 8.866-2014 The state system of measurement assurance. Standard a.c. voltage and current thermal converters. Verification procedure
- GOST 30323-1995 Short circuit in electrical installations. Calculation methods of thermit and electrodynamic effects short circuit currents
- GOST R 52736-2007 Short-circuits in electrical installations. Calculation methods of electrodynamics and thermal effects of short-circuit current
- GOST R 50254-1992 Short circuit in electrical installations. Calculation methods of thermit and electrodinamic effects of short circuit currents
- GOST R IEC 60287-3-3-2011 Electric cables. Calculation of the current rating. Part 3-3. Sections on operating conditions. Cables crossing external heat sources
ES-UNE, Heat flow meter
- UNE 21192:1994 ERRATUM CALCULATION OF THERMALLY PERMISSIBLE SHORT-CIRCUIT CURRENTS, TAKING INTO ACCOUNT NON-ADIABATIC HEATING EFFECTS.
- UNE-EN ISO 10211:2022 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017)
- UNE-EN 1934:1998 Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry
- UNE-ISO 9869-1:2023 Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 1: Heat flow meter method
- UNE-EN 17526:2022 Gas meter - Thermal-mass flow-meter based gas meter
- UNE-CEN/CLC/TR 17603-31-13:2021 Space Engineering - Thermal design handbook - Part 13: Fluid Loops (Endorsed by Asociación Española de Normalización in October of 2021.)
- UNE-EN 12939:2001 ERRATUM:2009 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance.
- UNE-EN 13384-2:2016+A1:2021 Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one combustion appliance
- UNE-EN 13384-1:2016+A1:2020 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one combustion appliance
International Electrotechnical Commission (IEC), Heat flow meter
- IEC 60287-2-1:2015 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
- IEC 60287-2-1:2006 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
- IEC 60287-2-3:2017 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
- IEC 60287-2-1:1994+AMD1:2001+AMD2:2006 CSV Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
- IEC 60287-2-1:1994+AMD1:2001 CSV Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
- IEC 60287-2-1:2023 CMV Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
- IEC 60287-2-1:2023 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
- IEC 60287-2-1:1994 Electric cables - Calculation of the current rating - Part 2: Thermal resistance; section 1: Calculation of thermal resistance
- IEC 60949:1988 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- IEC 60287-2-1:2001 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance; Calculation of thermal resistance
- IEC 60287-2-1/AMD2/COR1:2008 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance; Corrigendum 1; Amendment 2
- IEC 60287-2-1:1994/AMD1:2001 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance; Calculation of thermal resistance; Amendment 1
- IEC 60287-2-1:1994/AMD2:2006 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance; Amendment 2
- IEC 60949:1988/AMD1:2008 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects; Amendment 1
- IEC 60287-2-1:1994/AMD2:2006/COR1:2008 Corrigendum 1 - Amendment 2 - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of the thermal resistance
- IEC 60287-3-3:2007 Electric cables - Calculation of the current rating - Part 3-3: Sections on operating conditions - Cables crossing external heat sources
International Organization for Standardization (ISO), Heat flow meter
- ISO 14511:2001 Measurement of fluid flow in closed conduits - Thermal mass flowmeters
- ISO 14511:2019 Measurement of fluid flow in closed conduits — Thermal mass flowmeters
- ISO 8301:1991 Thermal insulation; determination of steady-state thermal resistance and related properties; heat flow meter apparatus
- ISO 10211:2007 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- ISO 9869-1:2014 Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 1: Heat flow meter method
- ISO 2581:1975 Plastics; Rigid cellular materials; Determination of "apparent" thermal conductivity by means of a heat-flow meter
- ISO 8301:1991/Amd 1:2010 Thermal insulation - Determination of steady-state thermal resistance and related properties - Heat flow meter apparatus; Amendment 1
- ISO/CD 9124:1979 Paints and varnishes — Thermal performance of paint films — Determination of solar irradiation penetration ratio with heat flow meter
- ISO 9164:1989 Thermal insulation; calculation of space heating requirements for residential buildings
- ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
- ISO 10211-1:1995 Thermal bridges in building construction - Heat flow and surface temperatures - Part 1: General calculation methods
- ISO/AWI 10293 Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Heat flow meter method
- ISO 3150:1975 Radiators, convectors and similar appliances; Calculation of thermal output and presentation of results
- ISO 10211-1:1995/Cor 1:2002 Thermal bridges in building construction - Heat flows and surface temperatures - Part 1: General calculation methods; Technical Corrigendum 1
- ISO 6834:2022 Plain bearings — Thermo-hydrodynamic lubrication design charts for circular cylindrical bearings under steady-state conditions
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Heat flow meter
- GB/T 20727-2006 Measurement of fluid flow in closed conduits Thermal mass flowmeters
- GB/T 10295-1988 Thermal insulation--Determination of steady-state thermal resistance and related properties--Heat flow meter apparatus
- GB/T 10295-2008 Thermal insulation.Determination of steady-state thermal resistance and related properties.Heat flow meter apparatus
- GB/T 17357-1998 In-situ measurements of heat loss in thermal insulation of equipments and pipes--Heat flow meter apparatus
- GB/T 42397-2023 Calculation of allowable short-circuit current when considering non-adiabatic effect
- GB/T 17357-2008 In-situ measurements of heat loss through thermal insulation of equipments and pipes. Heat flow meter apparatus and surface temperature method
- GB/T 24959-2010 Refrigerated light hydrocarbon fluids.Measurement of temperature in tanks containing liquefied gases.Resistance thermometers and thermocouples
AENOR, Heat flow meter
- UNE 21192:1992 CALCULATION OF THERMALLY PERMISSIBLE SHORT-CIRCUIT CURRENTS, TAKING INTO ACCOUNT NON-ADIABATIC HEATING EFFECTS.
- UNE 21144-2-1/1M:2002 Electric cables. Calculation of the current rating. Part 2-1: Thermal resistance. Calculation of thermal resistance.
- UNE-EN 675:2011 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
- UNE 21144-2-1:1997 ELECTRIC CABLES. CALCULATION OF THE CURRENT RATING. PART 2: THERMAL RESISTANCE. SECTION 1: CALCULATION OF THERMAL RESISTANCE.
- UNE 21192:1992/1M:2009 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects.
- UNE 21144-2-1:1997/2M:2007 Electric cables. Calculation of the current rating. Part 2-1: Thermal resistance. Calculation of thermal resistance. (IEC 60287-2-1:1994/A2:2006).
- UNE-EN ISO 10211:2012 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007)
- UNE-EN 12667:2002 Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance.
- UNE-EN 12939:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance.
- UNE-EN 12664:2002 Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Dry and moist products of medium and low thermal resistance.
- UNE-EN 1946-3:1999 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method
- UNE-ISO 8310:2005 Refrigerated light hydrocarbon fluids -- Measurement of temperature in tanks containing liquefied gases -- Resistance thermometers and thermocouples
- UNE-EN 13384-3:2007 Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance
KR-KS, Heat flow meter
- KS C IEC 60287-2-1-2022 Electric cables — Calculation of the current rating — Part 2-1: Thermal resistance — Calculation of the thermal resistance
- KS C IEC 60287-2-1-2019 Electric cables — Calculation of the current rating — Part 2-1: Thermal resistance — Calculation of the thermal resistance
Standard Association of Australia （SAA）, Heat flow meter
- IEC 60287-2-1:2015 RLV Electric cables — Calculation of the current rating — Part 2-1: Thermal resistance — Calculation of thermal resistance
Japanese Industrial Standards Committee (JISC), Heat flow meter
- JIS C 1101:1975 Thermoelectric type high-frequency ampere meter for panel
- JIS K 5603:2017 Thermal performance of paint film -- Determination of solar absorptance with a heat flow meter
- JIS A 1412-2:1999 Test method for thermal resistance and related properties of thermal insulations -- Part 2: Heat flow meter apparatus
- JIS Z 4509:1989 Methods of evaluating dose equivalent by film badges for X-rays, gamma rays and thermal neutrons
Lithuanian Standards Office , Heat flow meter
- LST EN 1934-2000 Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry
- LST EN 675-2011 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
- LST EN 12667-2002 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
- LST EN ISO 10211:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007)
- LST EN 12939-2002 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
- LST EN 12664-2002 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
- LST EN 13384-2-2003+A1-2009 Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance
- LST EN 1946-3-2000 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method
- LST EN 13384-1-2003+A2-2008 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance
- LST EN 13384-3-2006 Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance
Association Francaise de Normalisation, Heat flow meter
- NF P50-732:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations.
- NF P50-732*NF EN ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- NF E17-307*NF EN 17526:2021 Gas meter - Thermal-mass flow-meter based gas meter
- NF P78-459*NF EN 675:2011 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
- NF EN 17526:2021 Compteurs de gaz - Compteur de gaz basé sur un débitmètre massique par effet thermique
- NF P50-732-1:1995 Thermal bridges in bluilding construction - Heat flows and surface temperatures - Part 1 : general calculation methods.
- NF ISO 14934-4:2015 Essais au feu - Étalonnage et utilisation des appareils de mesure du flux thermique - Partie 4 : lignes directrices pour l'utilisation des fluxmètres thermiques dans les essais au feu
- NF P50-750*NF EN 1934:1998 Thermal performance of buildings. Determination of thermal resistance by hot box method using heat flow meter. Masonry.
- NF P50-761*NF EN 12939:2001 Thermal performance of building materials and products - Determination of thermal resistande by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance.
- NF P75-224*NF EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
- NF P51-002-2:2009 Chimneys - Thermal and fluid dynamic calculation methods - Part 2 : chimneys serving more than one heating appliance.
- NF P51-002-1:2015 Chimneys - Thermal and fluid dynamic calculation methods - Part 1 : chimneys serving one heating appliance
- NF P75-225*NF EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
- NF P50-749-3*NF EN 1946-3:1999 Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Part 3 : measurements by heat flow meter method.
- NF P51-002-1:2008 Chimneys - Thermal and fluid dynamic calculation methods - Part 1 : chimneys serving one appliance.
- NF P51-002-3*NF EN 13384-3:2007 Chimneys - Thermal and fluid dynamic calculation methods - Part 3 : methods for the development of diagrams and tables for chimneys serving one heating appliance
- NF P51-002-2*NF EN 13384-2+A1:2019 Chimneys - Thermal and fluid dynamic calculation methods - Part 2 : chimneys serving more than one combustion appliance
- NF P51-002-1/IN1*NF EN 13384-1/IN1:2019 Chimneys - Thermal and fluid dynamic calculation methods - Part 1 : chimneys serving one combustion appliance
- NF P51-002-1*NF EN 13384-1+A1:2019 Chimneys - Thermal and fluid dynamic calculation methods - Part 1 : chimneys serving one combustion appliance
- NF P51-002-2/IN1*NF EN 13384-2/IN1:2019 Chimneys - Thermal and fluid dynamic calculation methods - Part 2 : chimneys serving more than one combustion appliance
- NF EN ISO 20765-2:2018 Gaz naturel - Calcul des propriétés thermodynamiques - Partie 2 : propriétés des phases uniques (gaz, liquide, fluide dense) pour une gamme étendue d'applications
European Committee for Standardization (CEN), Heat flow meter
- EN 675:2011 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
- EN 1934:1998 Thermal Performance of Buildings - Determination of Thermal Resistance by Hot Box Method Using Heat Flow Meter - Masonry
- prEN 32573-1992 Thermal bridges in building construction; heat flows and surface temperatures; general calculation methods
- EN ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- EN 675:1997 Glass in Building - Determination of Thermal Transmittance (U Value) - Heat Flow Meter Method
- FprEN 17526-2021 Gas meter - Thermal-mass flow-meter based gas meter
- EN 17526:2021 Gas meter - Thermal-mass flow-meter based gas meter
- prEN 675-1992 Measuring procedures for the determination of the thermal transmittance (U value) of multiple glazing (heat flow meter method)
- prEN 12939 rev Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
- CEN/CLC/TR 17603-31-13-2021 Space Engineering - Thermal design handbook - Part 13: Fluid Loops
- EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
- EN 13384-2:2015 Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance
- EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
- EN ISO 10211-2:2001 Thermal Bridges in Building Construction - Calculation of Heat Flows and Surface Temperatures - Part 2: Linear Thermal Bridges ISO 10211-2: 2001
- EN ISO 10211-1:1995 Thermal bridges in building construction Calculation of heat flows and surface temperatures Part 1: General methods
- EN 12939:2000 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Thick Products of High and Medium Thermal Resistance
- CEN/TR 15131:2006 Thermal performance of building materials - The use of interpolating equations in relation to thermal measurement on thick specimens - Guarded hot plate and heat flow meter apparatus
- PD CEN/TR 15131:2006 Thermal performance of building materials The use of interpolating equations in relation to thermal measurement on thick specimens Guarded hot plate and heat flow meter apparatus
- EN ISO 10211:2007 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- EN 1946-3:1999 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method
- EN ISO 15351:2010 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999)
- EN 13384-1:2015 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance
- EN 13384-3:2005 Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance
- EN 13384-2:2003 Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance Incorporates Amendment A1: 2009
- EN ISO 12115:1997 Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Flowability, Maturation and Shelf Life ISO 12115: 1997
未注明发布机构, Heat flow meter
- DIN EN 675:1999 Glass in building — Determination of thermal transmittance (U value) — Heat flow meter method
- DIN EN ISO 10211-1:1995 Thermal bridges in building construction — Heat flows and surface temperatures — Part 1: General calculation methods
国家能源局, Heat flow meter
- NB/T 10304-2019 Bimetallic thermal protector for tubular fluorescent lamp ballasts
US-FCR, Heat flow meter
YU-JUS, Heat flow meter
- JUS M.E6.082-1980 Radiators, convectors and similar appliances. Calculation of thermal output and presentation ofresuhs
- JUS M.E6.080-1980 Radiators, convectors and similar appliances. Determination oh thermal output. Test method using liquid-cooled cbsed booth
IT-UNI, Heat flow meter
Professional Standard - Nuclear Industry, Heat flow meter
- EJ/T 20046-2014 Design criteria for sodium cooled fast breeder reactor.Thermal-hydraulic design
- EJ/T 20033-2012 Thermal Fluid Dynamics Design Criteria for Space Thermionic Reactor Nuclear Power Plant
Taiwan Provincial Standard of the People's Republic of China, Heat flow meter
- CNS 9267-1998 Method of mass calculation for stainless steel plates and sheets and heat-resisting steel plates and sheets
- CNS 9267-2005 Method of mass calculation for stainless steel plates and sheets,and heat-resisting steel plates and sheets
National Metrological Technical Specifications of the People's Republic of China, Heat flow meter
- JJF 1623-2017 Program of Pattern Evaluation of Thermal Mass Gas Flowmeters
PT-IPQ, Heat flow meter
- NP EN 1934-2000 Thermal performance of buildings Determination of thermal resistance by hot box method using heat flow meter Masonry
FI-SFS, Heat flow meter
Professional Standard - Aviation, Heat flow meter
- HB 20115-2012 Eddy current measurement method for thermal barrier coating thickness of aero-engine blades
工业和信息化部, Heat flow meter
- JB/T 13620.6-2018 Plastic injection mold hot runner system components Part 6: Pressure-bearing gasket
Group Standards of the People's Republic of China, Heat flow meter
- T/HATSI 0004-2020 Technical specification for green-design product assessment- Alumina ceramic substrate by tape casting
- T/CNS 29-2020 Core thermal hydraulic design criteria for high temperature gas cooled reactor nuclear power plant
- T/CNLIC 0029-2021 Green Design Product Evaluation Technical Specifications for Thermoplastic Polyolefin Elastomer (TPO) Composite Sheets for Automobiles
CU-NC, Heat flow meter
- NC 15-57-1986 Cool Technique, Commercial and Industrial Equipment. Thermal-Charge Calculation Sheet for Air-conditioning Installations
- NC 15-68-1987 Thermotechnics. Solar Heating System for Water Using Thermosiphonic Circulation. Assembly and Design Requirements
Professional Standard - Chemical Industry, Heat flow meter
- HG/T 20559.6-1993 Pipeline instrument flow chart design specifies codes for heat insulation, heat preservation, fire protection and sound insulation of pipeline instrument flow chart
CEN - European Committee for Standardization, Heat flow meter
- EN 13384-2:2015/PRA1:2018 Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance
- EN 13384-1:2015/PRA1:2018 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance
- EN 13384-1:2000 Chimneys Thermal and fluid dynamic calculation methods Part 1: Chimneys serving one appliance (Incorporates Amendment A1: 2005)
CH-SNV, Heat flow meter
GB-REG, Heat flow meter
- REG NASA-LLIS-1015-1997 Lessons Learned ?International Space Station (ISS) Program/Micrometeoroid Debris Protection/Hazard Detection, Assessment and Control
HU-MSZT, Heat flow meter
Professional Standard - Non-ferrous Metal, Heat flow meter
- YS/T 119.9-2005 Determination and calculation method of heat balance of special equipments for alumina production-Part 9:Fluidized baking-furnace system