ZH
RU
ES

Anisotropic Fiber Reinforced Plastics

Anisotropic Fiber Reinforced Plastics, Total:489 items.

In the international standard classification, Anisotropic Fiber Reinforced Plastics involves: Reinforced plastics, Plastics, Fluid storage devices, Pipeline components and pipelines, Rubber and plastics products, Materials for aerospace construction, Materials for the reinforcement of composites, Construction materials, Equipment for the chemical industry, Protection against fire, External sewage systems, Equipment for petroleum and natural gas industries, Fibre optic communications, Vocabularies, Insulating materials, Installations in buildings, External water conveyance systems, Adhesives, Elements of buildings, Rubber.

Danish Standards Foundation, Anisotropic Fiber Reinforced Plastics

DS/EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: test conditions for isotropic and orthotropic fibre-reinforced plastic composites
DS/EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
DS/EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
DS/EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/Corr.1:2002 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125:1999 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 12114:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics
DS/EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
DS/EN ISO 12115:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs Determination of flowability, maturation and shelf life
DS/EN 16245-1:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
DS/EN ISO 14126:2000 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999)
DS/EN 1447+A1:2011 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of long-term resistance to internal pressure
DS/EN ISO 75-3/AC:2006 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
DS/EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
DS/EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
DS/EN 16245-4:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
DS/EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
DS/EN ISO 14126/AC:2002 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999/Cor.1:2001)

Association Francaise de Normalisation, Anisotropic Fiber Reinforced Plastics

NF T51-034-4*NF EN ISO 527-4:2021 Plastics - Determination of tensile properties - Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites
NF EN ISO 527-4:2023 Plastiques - Détermination des propriétés en traction - Partie 4 : conditions d'essai pour les composites plastiques renforcés de fibres isotropes et orthotropes
NF EN 14447:2005 Plastiques renforcés de fibres - Thermoplastiques renforcés de mats de verre (GMT) - Détermination de la fluidité et de la solidification
NF T51-034-4:1997 Plastics. Determination of tensile properties. Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites.
NF EN 13421:2006 Plastiques - Compositions de moulage thermodurs - Composites et fibres de renfort - Préparation des éprouvettes pour déterminer l'anisotropie des propriétés des composites de moulage par compression
NF T57-541*NF EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
NF T57-105*NF EN ISO 14125:1998 Fibre-reinforced plastic composites. Determination of flexural properties.
NF EN ISO 14125:1998 Composites plastiques renforcés de fibres - Détermination des propriétés de flexion
NF T25-501-1:2015 Fibres de renfort - Fibres de lin pour composites plastiques - Partie 1 : terminologie et caractérisation des fibres de lin
NF EN ISO 14126:2000 Composites plastiques renforcés de fibres - Détermination des caractéristiques en compression dans le plan
NF T25-501-2:2015 Fibres de renfort - Fibres de lin pour composites plastiques - Partie 2 : détermination des propriétés en traction des fibres élémentaires
NF T25-501-3:2015 Fibres de renfort - Fibres de lin pour composites plastiques - Partie 3 : détermination des propriétés en traction des fibres techniques
NF B38-002*NF ISO 4899:1995 Textile-glass-reinforced thermosetting plastics. Properties and test methods.
NF ISO 15024:2002 Composites plastiques renforcés de fibres - Détermination de la ténacité à la rupture interlaminaire en mode I, Gic, de matériaux composites à matrice polymère renforcés de fibres unidirectionnelles
NF EN 16245-3:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 3 : exigences particulières pour les fibres
NF EN ISO 12114:1997 Plastiques renforcés de fibres - Compositions de moulage thermodurcissables et préimprégnés - Détermination des caractéristiques de durcissement.
NF T57-120-3*NF EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3 : specific requirements for fibre
NF T57-105/A1*NF EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1.
NF T57-103*NF EN ISO 14126:2000 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction
NF EN ISO 14125/A1:2011 Composites plastiques renforcés de fibres - Détermination des propriétés de flexion - Amendement 1
NF EN ISO 10350-2:2020 Plastiques - Acquisition et présentation de caractéristiques intrinsèques comparables - Partie 2 : plastiques renforcés par de longues fibres
NF T57-103:1991 TEXTIL-GLASS-REINFORCED PLASTICS. DETERMINATION OF COMPRESSIVE PROPERTIES IN THE DIRECTION PARALLEL TO THE PLANE OF LAMINATION.
NF T25-301*NF EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
NF T51-034-5:2009 Plastics - Determination of tensile properties - Part 5 : test conditions for unidirectional fibre-reinforced plastic composites.
NF EN ISO 527-5:2021 Plastiques - Détermination des propriétés en traction - Partie 5 : conditions d'essai pour les composites plastiques renforcés de fibres unidirectionnelles
NF EN ISO 25762:2012 Plastiques - Lignes directrices pour l'évaluation des caractéristiques au feu et des performances au feu de composites polymères renforcés de fibres
NF T57-107:1986 Glass-fibre-reinforced plastics. Measurement of the change of characteristics during hot water treatment.
NF T57-034*NF EN 17129:2018 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
NF EN 17129:2018 Composites plastiques renforcés de fibres continues - Joncs unidirectionnels pultrudés - Détermination des propriétés en traction parallèlement à la direction des fibres
NF EN ISO 75-3:2005 Plastiques - Détermination de la température de fléchissement sous charge - Partie 3 : stratifiés thermodurcissables à haute résistance et plastiques renforcés de fibres longues
NF T57-120-1*NF EN 16245-1:2013 Fibre-reinforced plastic composites -Declaration of raw material characteristics - Part 1: general requirements
NF T57-513:1973 Plastics materials reinforced with textile glass. Pre-impregnated mats based on polyester resins. Plasticity.
NF T51-034-5*NF EN ISO 527-5:2021 Plastics - Determination of tensile properties - Part 5 : test conditions for unidirectional fibre-reinforced plastic composites
NF EN 6037:2017 Série aérospatiale - Matières plastiques renforcées de fibres - Méthode d'essai - Détermination de la résistance au matage
NF T51-005-3*NF EN ISO 75-3:2005 Plastics - Determination of temperature of deflection under load - Part 3 : high-strength thermosetting laminates and long-fibre-reinforced plastics
NF T57-220*NF EN 1228:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial specific ring stiffness.
NF T51-086*NF EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
NF T57-204:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of long-term resistance to internal pressure.
NF T57-227:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure.
NF T57-222*NF EN 1393:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial longitudinal tensile properties.
NF T57-614*NF EN ISO 12114:1997 Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of cure characteristics.
NF T51-034-5:1997 Plastics. Determination of tensile properties. Part 5 : test conditions for unidirectional fibre-reinforced plastic composites.
NF EN 16245-4:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 4 : exigences particulières pour les tissus
NF EN 16245-5:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 5 : exigences particulières pour les matériaux d'âme
NF T57-120-4*NF EN 16245-4:2013 Fibre-reinforced plastic composites -Declaration of raw material characteristics - Part 4 : specific requirements for fabrics
NF P38-402:1985 TRANSLUCENT GLASS FIBRE REINFORCED RIBBED POLYESTER SHEETS. DIMENSIONAL CHARACTERISTICS.
NF T57-160-2*NF ISO 3597-2:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2 : determination of flexural strength.
NF T57-160-3*NF ISO 3597-3:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3 : determination of compressive strength
NF T51-005-3:1996 Plastics. Determination of temperature of deflection under load. Part 3 : high-strength thermosetting laminates and long-fibre reinforced plastics.
NF T57-120-5*NF EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: specific requirements for core materials
NF T57-514:1973 Plastics materials reinforced with textile glass. Pre-impregnated mats based on polyester resins. Mouldability.
NF T57-211*NF EN 705:1994 Plastics piping sytems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Methods for regression analysis and their use.

Standard Association of Australia （SAA）, Anisotropic Fiber Reinforced Plastics

AS 1145.4:2001 Determination of tensile properties of plastics materials - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
AS 2634:1983 Chemical plant equipment made from glass-fibre reinforced plastics (GRP) based on thermosetting resins
AS 1145.5:2001 Determination of tensile properties of plastics materials - Test conditions for fibre-reinforced plastic composites

ES-UNE, Anisotropic Fiber Reinforced Plastics

UNE-EN ISO 527-4:2022 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021, Corrected version 2022-02)
UNE-EN ISO 14125/AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties. (ISO 14125:1998/Cor. 1:2001)
UNE-EN ISO 14126/AC:2002 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction. (ISO 14126:1999/Cor. 1:2001).
UNE-EN 17129:2020 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
UNE-EN ISO 527-5:2022 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)

British Standards Institution (BSI), Anisotropic Fiber Reinforced Plastics

BS EN ISO 527-4:2023 Tracked Changes. Plastics. Determination of tensile properties. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
20/30409900 DC BS EN ISO 527-4. Plastics. Determination of tensile properties. Part 4. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
BS EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
BS EN 2378:1995 Fibre reinforced plastics - Determination of water absorption by immersion
BS EN ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
BS EN ISO 14125:1998+A1:2011 Fibre-reinforced plastic composites. Determination of flexural properties
BS EN ISO 527-4:1997 Plastics - Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
BS EN 16245-3:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fibre
BS ISO 15024:2023 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
BS EN ISO 14126:1999 Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
BS ISO 15024:2002 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, $iGic, for unidirectionally reinforced materials
BS EN 16245-1:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. General requirements
BS ISO 13003:2004 Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions
BS ISO 13003:2003 Fibre-reinforced plastics. Determination of fatigue properties under cyclic loading conditions
BS EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
19/30377309 DC BS ISO 22838. Composites and reinforcements fibres. Determination of the fracture toughness of bonded plates of carbon fibre reinforced plastics (CFRPs) and metal using double cantilever beam specimens
BS EN 16245-4:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fabrics
BS EN ISO 12114:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics
BS EN ISO 527-5:1997 Plastics - Determination of tensile properties - Test conditions for unidirectional fibre-reinforced plastic composites
BS EN 17129:2018 Continuous-fibre-reinforced plastic composites. Pultruded unidirectional rods. Determination of tensile properties in parallel to the fibre direction
23/30442752 DC BS ISO 8060. Composites and reinforcements fibres. Carbon fibre reinforced plastics (CFRPs) and metal assemblies. Characterization of durability of adhesive interfaces by wedge rupture test
BS EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5:Test conditions for unidirectional fibre-reinforced plastic composites
BS ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength
BS ISO 3597-2:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of flexural strength
BS EN 16245-5:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for core materials
BS EN ISO 527-5:2021 Tracked Changes. Plastics. Determination of tensile properties. Test conditions for unidirectional fibre-reinforced plastic composites
22/30409908 DC BS EN ISO 14126. Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
BS EN 1447:2009+A1:2010 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure
BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
BS ISO 30021:2013 Plastics. Burning behavior. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
BS ISO 18352:2009 Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impact-energy level
BS ISO 3597-4:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of apparent interlaminar shear strength
BS ISO 3597-1:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - General considerations and preparation of rods
20/30409904 DC BS EN ISO 527-5. Plastics. Determination of tensile properties. Part 5. Test conditions for unidirectional fibre-reinforced plastic composites
BS EN ISO 12115:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life

German Institute for Standardization, Anisotropic Fiber Reinforced Plastics

DIN EN 14447:2005-07 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
DIN EN ISO 527-4:2023-07 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023); German version EN ISO 527-4:2023
DIN EN ISO 527-4:2022 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021)
DIN EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
DIN EN ISO 12114:1997-08 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997
DIN EN 16245-3:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre; German version EN 16245-3:2013
DIN EN ISO 14126:2022-10 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO/DIS 14126:2022); German and English version prEN ISO 14126:2022 / Note: Date of issue 2022-09-16*Intended as replacement for DIN EN ISO 14126 (...
DIN EN ISO 12114:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997
DIN EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites English version of DIN EN 13421:2006-05
DIN 53393:1976 Testing of Textile Glass-reinforced Plastics; Behaviour to the Effect of Chemicals
DIN EN 17129:2019-02 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction; German version EN 17129:2018
DIN EN 1393:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties; German version EN 1393:1996
DIN EN 16245-1:2013-07 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements; German version EN 16245-1:2013
DIN EN ISO 75-3:2004-09 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004); German version EN ISO 75-3:2004
DIN EN ISO 14126:2000-12 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999 / Note: To be replaced by DIN EN ISO 14126 (2022-10).
DIN EN ISO 25762:2012-04 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009); German version EN ISO 25762:2012
DIN EN 17129:2019 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
DIN 16948-2:1975 Glass fibre reinforced reaktion moulding materials in the moulded state; properties of special moulding materials
DIN EN ISO 12115:1997-08 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997
DIN EN ISO 527-5:2022-05 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021); German version EN ISO 527-5:2021
DIN EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004); German version EN ISO 75-3:2004
DIN EN 1228:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996
DIN SPEC 16457:2019-12 Short fiber reinforced thermoplastics - Tension-compression-shear test with tube specimens under cyclic loading
DIN EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009); German version EN ISO 527-5:2009
DIN EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites (ISO 527-4:1997); German version EN ISO 527-4:1997
DIN EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre; German version EN 16245-3:2013
DIN EN 16245-5:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials; German version EN 16245-5:2013
DIN EN 16245-4:2013-07 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics; German version EN 16245-4:2013
DIN 65148:1986-11 Aerospace; testing of fibre-reinforced plastics; determination of interlaminar shear strength by tenside test
DIN EN ISO 12115:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997
DIN EN 1394:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996
DIN EN 16245-4:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics; German version EN 16245-4:2013
DIN 16872:1993 Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions
DIN EN 1229:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996
DIN 65672:2009-07 Aerospace - Continuous filament fibre reinforced laminates with non-reactive thermoplastics - Preparation of test panels; Text in German and English

AENOR, Anisotropic Fiber Reinforced Plastics

UNE-EN ISO 527-4:1997 PLASTICS. DETERMINATION OF TENSILE PROPERTIES. PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES (ISO 527-4:1997).
UNE-EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
UNE-EN 14447:2006 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
UNE-EN ISO 12114:1997 FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPOUNDS AND PREPREGS. DETERMINATION OF CURE CHARACTERISTICS. (ISO 12114:1997).
UNE-EN 16245-3:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
UNE-EN ISO 14125:1999 FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998)
UNE-EN 16245-1:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
UNE 53955:2002 EX Plastics. Prefabricated swimming pools made from fiber glass reinforced plastics (GRP). Characteristics ant test methods.
UNE-EN ISO 12115:1998 FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPOUNDS AND PREPREGS. DETERMINATION OF FLOWABILITY, MATURATION AND SHELF LIFE. (ISO 12115:1997).
UNE-EN ISO 14126:2001 FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION. (ISO 14126:1999)
UNE-EN 16245-4:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
UNE-EN 16245-5:2014 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Part 5: Specific requirements for core materials
UNE-EN ISO 14125:1999/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd 1:2011)
UNE-EN ISO 75-3:2005 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics. (ISO 75-3:2004)
UNE-EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
UNE-EN ISO 527-5:2010 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)

Lithuanian Standards Office , Anisotropic Fiber Reinforced Plastics

LST EN 13421-2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
LST EN 14447-2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
LST EN ISO 12114:2000 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997)
LST EN ISO 14125+AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998)
LST EN ISO 527-4:2000 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997)
LST EN ISO 14126:2001 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999)
LST EN ISO 12115:2000 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997)
LST EN ISO 14126:2001/AC:2004 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999/Cor.1:2001)
LST EN ISO 14125+AC:2002/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd.1:2011)
LST EN ISO 75-3:2004/AC:2006 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
LST EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
LST EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)

Japanese Industrial Standards Committee (JISC), Anisotropic Fiber Reinforced Plastics

JIS K 7164:2005 Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
JIS K 7080-2:2012 Carbon fiber reinforced plastics -- Testing methods for bearing strength -- Part 2: Orthotropic and Quasi-isotropic long fiber laminates
JIS K 7017:1999 Fibre-reinforced plastics composites -- Determination of flexural properties
JIS K 7073:1988 Testing method for tensile properties of carbon fiber reinforced plastics
JIS K 7074:1988 Testing methods for flexural properties of carbon fiber reinforced plastics
JIS K 7076:1991 Testing methods for compressive properties of carbon fibre reinforced plastics
JIS K 7056:1995 Testing method for compressive properties of glass fiber reinforced plastics
JIS K 7055:1995 Testing method for flexural properties of glass fiber reinforced plastics
JIS K 7070:1999 Testing method for chemical resistance of fiber reinforced plastics
JIS K 7086:1993 Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics
JIS K 7085:1993 Testing method for multiaxial impact behaviour of carbon fibre reinforced plastics
JIS K 7070:1992 Testing method for chemical resistance of fiber reinforced plastics
JIS K 7018:1999 Fiber-reinforced plastic composites -- Determination of compressive properties in the in-plane direction
JIS K 7059:1995 Testing method for in-plane shear properties of glass fiber reinforced plastics
JIS K 7089:1996 Testing method for compression after impact properties of carbon fibre reinforced plastics
JIS K 7165:2008 Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
JIS K 7096:2017 Test method for through-thickness tensile properties of carbon fibre reinforced plastics -- Flexure method
JIS K 7191-3:2007 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
JIS K 7037:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength
JIS K 7033:1998 Plastics piping systems -- Pipes made of glass-reinforced thermosetting plastics (GRP) -- Determination of initial longitudinal tensile properties
JIS K 7191-3:1996 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
JIS K 7038:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection
JIS K 7041:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions
JIS K 7040:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method

VN-TCVN, Anisotropic Fiber Reinforced Plastics

TCVN 4501-4-2009 Plastics.Determination of tensile properties.Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
TCVN 4501-5-2009 Plastics.Determination of tensile properties.Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Anisotropic Fiber Reinforced Plastics

GB/T 1040.4-2006 Plastics. Determination of tensile properties. Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
GB/T 1462-1988 Test methods for water absorption of fiber reinforced plastics
GB/T 1462-2005 Test methods for water absorption of fiber reinforced plastics
GB/T 1446-1983 The generals of test methods for properties of fiber-reinforced plastics
GB/T 1446-2005 Fiber-reinforced plastics composites-The generals for determination of properties
GB/T 1448-2005 Fiber-reinforced plastics composites-Determination of compressive properties
GB/T 1447-2005 Fiber-reinforced plastics composites---Determination of tensile properties
GB/T 1449-2005 Fibre-reinforced plastic composites-Determination of flexural properties
GB/T 2575-1989 Test method for resistance of glass fiber reinforced plastics to water
GB/T 36532-2018 Fibre-reinforced plastics.Thermosetting moulding compounds and prepregs.Determination of cure characteristics
GB/T 3354-1999 Test method for tensile properties of oriented fiber reinforced plastics
GB/T 3356-1999 Test method for flexural properties of unidirectional fiber reinforced plastics
GB/T 1448-1983 Test method for compressive properties of glass fiber-reinforced plastics
GB/T 1449-1983 Test method for flexural properties of glass fiber-reinforced plastics
GB/T 1447-1983 Test method for tensile properties of glass fiber-reinforced plastics
GB/T 2573-2008 Test method for aging properties of glass fiber reinforced plastics
GB/T 5258-2008 Fibre-reinforced plastic composites.Determination of compressive properties in the in-plane direction
GB/T 42920-2023 Evaluation of fire-resistant characteristics and fire performance of plastic fiber reinforced plastic composites
GB/T 5258-1995 Test method for compressive properties of fiber reinforced plastic thin laminates
GB/T 10703-1989 Test method accelerated for resistance of glass fiber reinforced plastics to water
GB/T 9979-1988 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reducde temperatures
GB/T 9979-2005 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures
GB/T 28891-2012 Fibre-reinforced plastic composites.Determination of mode I interlaminar fracture toughness G<下标IC> for unidirectionally reinforced materials
GB/T 3856-1983 Test method for compression properties of unidirectional fiber reinforced plastics
GB/T 6011-1985 Test method for flammability characteristics of fiber-reinforced plastics--Incandescent rod method
GB/T 1451-2005 Fiber-reinforced plastics composites---Determination of Charpy impact properties
GB/T 6011-2005 Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method
GB/T 8924-2005 Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method
GB 6011-1985 Test method for flammability characteristics of fiber-reinforced plastics－Incandescent rod method
GB/T 3856-2005 Test method for compression properties of unidirectional fiber reinforced plastics
GB/T 5349-1985 Test method for longitudinal tensile properties of fiber-reinforced thermosetting plastic pipe
GB/T 5350-1985 Test method for longitudinal compressive properties of fiber-reinforced thermosetting plastic pipe
GB/T 5349-2005 Fiber-reinforced thermosetting plastic composites pipe-Determination of longitudinal tensile properties
GB/T 5350-2005 Fiber-reinforced thermosetting plastic composites pipe-Determination for longitudinal compressive properties
GB 5349-1985 Test method for axial tensile properties of fiber reinforced thermosetting plastic pipes
GB/T 16779-1997 Test method for tension--tension fatigue of fiber reinforced plastic laminates
GB/T 13096.1-1991 Test method for tensile properties of pultruded glass fiber reinforced plastic rods
GB/T 13096.2-1991 Test method for flexural properties of pultruded glass fiber reinforced plastic rods
GB/T 13096-2008 Test method for mechanical properties of pultruded glass fiber reinforced plastic rods
GB/T 16779-2008 Test method for tension-tension fatigue of fibre reinforced plastic laminates
GB/T 5352-1985 Test method for external loading properties of fiber-reinforced thermosetting plastic pipe by parallel-plate loading
GB/T 5352-2005 Fiber-reinforced thermosetting plastic composites pipe-Determination for external loading properties by parallel-plate loading
GB/T 8924-1988 Test method for flammability characteristics of glass fiber reinforced plastics using the oxygen index method
GB/T 1451-1983 Test method for the charpy impact resistance of glass fiber-reinforced plastics
GB/T 21239-2007 Test method for compression after impact properties of fiber reinforced plastic laminates
GB/T 21239-2022 Test method for compression after impact properties of fiber reinforced plastic laminates
GB/T 1458-2008 Test method for mechanical properties of fiber-wound reinforced plastic annular specimens
GB/T 3857-1987 Test method for chemical resistance of glass fiber reinforced thermosetting plastics
GB/T 3857-2005 Test method for chemical resistance of glass fiber reinforced thermosetting plastics
GB/T 5351-1985 Test method for short-time hydraulic failure pressure of fiber-reinforced thermosetting plastic pipe
GB/T 5351-2005 Fiber-reinforced thermosetting plastic composites pipe-Determination of short-time hydraulic failure pressure
GB/T 41879-2022 Plastics—Burning behaviour—Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
GB/T 14208.2-2009 Textile-glass-reinforced plastics.Determination of mechanical properties on rods made of roving-reinforced resin.Part 2:Determination of flexural strength
GB/T 14208.3-2009 Textile-glass-reinforced plastics.Determination of mechanical properties on rods made of roving-reinforced resin.Part 3:Determination of compressive strength
GB/T 1040.5-2008 Plastic.Determination of tensile properties.Part 5:Test conditions for unidirectional fibre-reinforced plastic composites
GB/T 43117-2023 Determination of ring creep properties of glass fiber reinforced thermoset plastic (GRP) pipes under wet or dry conditions

International Organization for Standardization (ISO), Anisotropic Fiber Reinforced Plastics

ISO 527-4:2023 Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-4:2021 Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 14126:1999 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction
ISO 4899:1993 Textile-glass reinforced thermosetting plastics; properties and test methods
ISO/FDIS 14126:2023 Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
ISO 14126:2023 Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
ISO 13003:2003 Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions
ISO 14125:1998/cor 1:2001 Fibre-reinforced plastic composites - Determination of flexural properties; Technical Corrigendum 1
ISO/DIS 8060:2023 Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Characterization of durability of adhesive interfaces by wedge rupture test
ISO 8513:2000 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of longitudinal tensile properties
ISO 8521:1998 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
ISO 18352:2009 Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impact-energy level
ISO/CD 75-3 Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 527-5:2021 Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
ISO 14126:1999/cor 1:2001 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction; Technical corrigendum 1
ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 75-3:1993 Plastics; determination of temperature of deflection under load; part 3: high-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
ISO 25762:2009 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
ISO 30021:2013 Plastics.Burning behaviour.Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
ISO 75-1:2020 Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 75:1974 Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 12115:1997/cor 1:1998 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life; Technical Corrigendum 1
ISO 3597-2:1993 Textile-glass-reinforced plastics; determination of mechanical properties on rods made of roving-reinforced resin; part 2: determination of flexural strength
ISO 3597-2:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength
ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength
ISO 7684:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
ISO 10466:2021 Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
ISO 8515:1991 Textile-glass-reinforced plastics; determination of compression properties in the direction parallel to the plane of lamination
ISO 4585:1989 Textile glass reinforced plastics; determination of apparent interlaminar shear properties by short-beam test
ISO 7509:2000 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure
ISO 7509:2015 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure

American National Standards Institute （ANSI), Anisotropic Fiber Reinforced Plastics

ANSI/AWWA D120-2009 Thermosetting Fiberglass-Reinforced Plastic Tanks
ANSI/ASTM F2686:2010 Specification for Glass Fiber Reinforced Thermoplastic Pipe
ANSI/ASTM D4476:1997 Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods

European Committee for Standardization (CEN), Anisotropic Fiber Reinforced Plastics

EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
EN 61:1977 Glass reinforced plastics. Determination of tensile properties
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
EN ISO 14125:1998/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd 1:2011)
EN 16245-4:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
EN ISO 14125:1998/AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998/Cor.1:2001)
EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
EN ISO 527-5:2021 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)
EN 1447:1996 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Long-Term Resistance to Internal Pressure
EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
EN 16245-1:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
prEN ISO 75-3 rev Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
EN 1447:2009+A1:2010 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
EN 1228:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
prEN ISO 14126 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO/DIS 14126:2022)
EN ISO 75-3:1996 Plastics - Determination of Temperature of Deflection under Load - Part 3: High-Strength Thermosetting Laminates and Long-Fibre- Reinforced Plastics (ISO 75-3 : 1993)
EN ISO 12114:1997 Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Cure Characteristics ISO 12114: 1997
EN ISO 527-4:2023 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023)
EN ISO 527-5:1997 Plastics - Determination of Tensile Properties - Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites ISO 527-5: 1997
EN 1119:1996 Plastics Piping Systems - Joints for Glass- Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Test Methods for Leaktightness and Resistance to Damage of Flexible and Reduced- Articulation Joints
EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
EN 1226:1996 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Test Method to Prove the Resistance to Initial Ring Deflection
EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
EN 6031:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test)

Korean Agency for Technology and Standards (KATS), Anisotropic Fiber Reinforced Plastics

KS M ISO 527-4-2002(2022) Platics－Determination of tensile properties－Part 4：Test conditions for isotropic and orthotropic fibre－reinforced plastic composites
KS M ISO 527-4-2002(2017) Platics－Determination of tensile properties－Part 4：Test conditions for isotropic and orthotropic fibre－reinforced plastic composites
KS M 3083-1994 Testing method for chemical resistance of fiber reinforced plastics
KS M 3083-2014 Testing method for chemical resistance of fiber reinforced plastics
KS M 3083-2004(2009) Testing method for chemical resistance of fiber reinforced plastics
KS M ISO 14125:2012 Fibre-reinforced plastic composites－Determination of flexural properties
KS M 3709-2002 TESTING METHODS FOR COMPRESSIVE PROPERTIES OF CARBON FIBER REINFORCEDPLASTICS
KS M ISO 14125-2012(2017) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125-2012(2022) Fibre-reinforced plastic composites－Determination of flexural properties
KS M 3083-2004 Testing method for chemical resistance of fiber reinforced plastics
KS M 3381-2009 Testing method for tensile properties of glass fiber reinforced plastics
KS M 3383-2009 Testing methods for compressive properties of glass fiber reinforced plastics
KS M 3383-2004 Testing methods for compressive properties of glass fiber reinforced plastics
KS M 3382-2004 Testing methods for flexural properties of glass fiber reinforced plastics
KS M ISO 4899-2002(2017) Tixtile－glass－reinforced thermosetting plastics－Properties and test methods
KS M ISO 14126-2012(2022) Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction
KS M ISO 14126-2012(2017) Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction
KS M 3386-2016 Testing method for in－plane shear properties of glass fiber reinforced plastics
KS M 3386-2022 Testing method for in-plane shear properties of glass fiber reinforced plastics
KS M ISO 12114-2002(2020) Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of cure characteristics
KS M ISO 4899:2002 Tixtile－glass－reinforced thermosetting plastics－Properties and test methods
KS M 3386-2016(2021) Testing method for in－plane shear properties of glass fiber reinforced plastics
KS M ISO 13003:2012 Fibre-reinforced plastics－Determination of fatigue properties under cyclic loading conditions
KS M ISO 13003-2012(2022) Fibre-reinforced plastics－Determination of fatigue properties under cyclic loading conditions
KS M ISO 13003-2012(2017) Fibre-reinforced plastics－Determination of fatigue properties under cyclic loading conditions
KS M ISO 8513:2015 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
KS M ISO 8513:2004 Plastics piping systems-Glass-reinforced thermosetting plastics(GRP) pipes-Determination of longitudinal tensile properties
KS M ISO 8513:2017 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
KS M ISO 12114:2002 Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of cure characteristics
KS M ISO 15306:2016 Glass-reinforced thermosetting plastics (GRP) pipes－Determination of the resistance to cyclic internal pressure
KS M ISO 15306-2016(2021) Glass-reinforced thermosetting plastics (GRP) pipes－Determination of the resistance to cyclic internal pressure
KS M 3370-2013 Plastics piping systems for pressure and non-pressure water supply ?; Glass reinforced thermosetting plastics(GRP) systems based on unsaturated polyester(UP) resin
KS M 3370-2015 Plastics piping systems for water supply — Glass reinforced thermosetting plastics(GRP) based on unsaturated polyester(UP) resin — Pressure and non-pressure piping system
KS M 3370-2011 Plastics piping systems for pressure and non-pressure water supply-Glass reinforced thermosetting plastics(GRP) systems based on unsaturated polyester(UP) resin
KS M ISO 527-5:2012 Plastics－Determination of tensile properties－Part 5：Test conditions for unidirectional fibre-reinforced plastic composites
KS M ISO 527-5-2012(2022) Plastics－Determination of tensile properties－Part 5：Test conditions for unidirectional fibre-reinforced plastic composites
KS M ISO 527-5-2012(2017) Plastics－Determination of tensile properties－Part 5：Test conditions for unidirectional fibre-reinforced plastic composites
KS M ISO 12115-2002(2022) Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of flowability, maturation and shelf life
KS M ISO 12115-2002(2017) Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of flowability, maturation and shelf life
KS M ISO 75-3:2013 Plastics — Determination of temperature of deflection under load–Part 3: High-strength thermosetting laminate and long-fiber-reinforced plastics
KS M ISO 75-3:2008 Plastics-Determination of temperature of deflection under load-Part 3:High-strength thermosetting laminates and long-fibre-reinforced plastics
KS M ISO 75-3-2013(2018) Plastics — Determination of temperature of deflection under load–Part 3: High-strength thermosetting laminate and long-fiber-reinforced plastics
KS M ISO 3597-3:2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
KS M ISO 3597-2:2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
KS M 3082-2007(2017) Test methods for shear properties of fiber reinforced plastics by the V-notched specimen
KS M 3082-2007(2022) Test methods for shear properties of fiber reinforced plastics by the V-notched specimen
KS M ISO 10466:2004 Plastics piping systems－Glass-reinforced thermosetting plastics(GRP) pipes－Test method to prove the resistance to initial ring deflection
KS M ISO 3597-3:2012 Textile-glass-reinforced plastics-Determination of mechanical properties on rods made of roving-reinforced resin-Part 3:Determination of compressive strength
KS M ISO 3597-2:2012 Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 2：Determination of flexural strength
KS M 3714-2002 TESTING METHODS FOR IN-PLANE SHEAR PROPERTIES OF CARBON FIBER REINFORCED PLASTICS BY +-45 TENSION METHOD AND TWO PAIRS OF RAILS METHOD
KS M ISO 3597-1-2012(2017) Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 1：General considerations and preparation of rods
KS M ISO 15306:2012 Glass-reinforced thermosetting plastics (GRP) pipes-Determination of the resistance to cyclic internal pressure
KS M ISO 3597-4:2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength

未注明发布机构, Anisotropic Fiber Reinforced Plastics

DIN EN 1638:1997 Pipes made of glass fiber reinforced thermoset plastics
BS EN ISO 14126:1999(2003) Fibre - reinforcedplastic composites — Determination of compressive properties in the in - plane direction
DIN EN ISO 10350-2:2001 Plastics – Determination and presentation of comparable single-point characteristics – Part 2: Long fiber-reinforced plastics
BS EN ISO 75-3:2004(2006) Plastics — Determination of temperature of deflection under load — Part 3 : High - strength thermosetting laminates and long - fibre - reinforced plastics
DIN EN ISO 527-5:1997 Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fiber-reinforced plastic composites

(U.S.) Ford Automotive Standards, Anisotropic Fiber Reinforced Plastics

FORD WSB-M18P16-A-1995 SEALING REQUIREMENTS, ANTI-FLUTTER, FOR ISOLATION OF FRP/FRP PANELS
FORD ESB-M18P6-A-2007 FRP FILLER, PRODUCTION REPAIR - PERFORMANCE
FORD WSS-M4D962-A-2011 THERMOPLASTIC POLYESTER ELASTOMERIC MOLDING COMPOUND, 20% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M4D341-A2-1981 POLYESTER, THERMOPLASTIC - 30% GLASS REINFORCED MINERAL FILLED Shown on ESE-M4D341-A1

国家市场监督管理总局、中国国家标准化管理委员会, Anisotropic Fiber Reinforced Plastics

GB/T 38725.2-2020 Spoolable reinforced plastic pipe一Part 2: Fiber reinforced thermoplastic coiled pipe
GB/T 41061-2021 Test methods for creep properties of fiber reinforced plastics
GB/T 39490-2020 Test method for liquid impingement erosion resistance of fiber-reinforced plastics—Rotating apparatus method

BE-NBN, Anisotropic Fiber Reinforced Plastics

NBN 928-1971
NBN T 41-007-1975 Textile glass reinforced plastics — Determination of the compressive properties
NBN T 41-003-1977 Textile glass-reinforced plastics - Determination of tensile properties
NBN 927-1971

Professional Standard - Building Materials, Anisotropic Fiber Reinforced Plastics

JC/T 783-2004 Ball valves of glass fiber reinforced modified phenolic
JC/T 289-2010 Test method for water absorption of glass fibre reinforced plastics honeycomb
JC/T 490-2010 Dimensional tolerance of thermosetting glass fibre reinforced plastics pultruded shapes
JC/T 349-1983 Fiberglass reinforced plastics. Test method of tension fatigue resistance
JC/T 490-1992 Dimensional tolerance of extruded sections of fiber glass reinforced thermosetting plastic

Guangdong Provincial Standard of the People's Republic of China, Anisotropic Fiber Reinforced Plastics

DB44/T 1720-2015 Test method for tensile properties of carbon fiber reinforced plastics

Military Standard of the People's Republic of China-General Armament Department, Anisotropic Fiber Reinforced Plastics

GJB 8722-2015 Specification for fiber-reinforced nylon modified phenolic molding compounds
GJB 586-1988 Test method for tensile interlaminar fracture toughness of fiber reinforced plastic laminates
GJB 586A-2021 Test method for tensile interlaminar fracture toughness of fiber reinforced plastic laminates

Group Standards of the People's Republic of China, Anisotropic Fiber Reinforced Plastics

T/CSTM 00888-2023 Continuous carbon fiber reinforced thermoplastic unidirectional prepregs
T/SHPTA 039-2023 Plastics—Glass fiber reinforced and flame retardant modified polyamide 6 compound

Professional Standard - Aerospace, Anisotropic Fiber Reinforced Plastics

QJ 1403A-2004 Test method for compressive properties of fiber reinforced plastic sheet
QJ 1403-1988 Test method for compressive properties of fiber reinforced plastic sheet
QJ 971A-2011 Test method of tensile properties for small speciments of fiber-reinforced plastics
QJ 971-1986 Test method for tensile properties of small specimens of fiber-reinforced plastics
QJ 1632-1989 Test method for impact toughness of carbon fiber reinforced plastic sheet
QJ 1869-1990 Test method for flexural properties of small specimens of fiber-reinforced plastic sheets

Professional Standard - Chemical Industry, Anisotropic Fiber Reinforced Plastics

HG/T 2128-2009 Specifications for pipe of modified phenolic glass fiber reinforced plastics
HG/T 2129-2009 Specifications for pipe fitting of modified phenolic glass fiber reinforced plastics
HG/T 3732-2004 Modified phenolic glass fiber reinforced plastic ball valve specification

RU-GOST R, Anisotropic Fiber Reinforced Plastics

GOST R 54560-2015 Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST 32661-2014 Fibre reinforced thermosetting plastic pipes and parts of pipelines. General specifications
GOST R 57776-2017 Fibre reinforced thermosetting plastic pipes. Nondestructive testing method with manufacturing
GOST R 57777-2017 Fiberglass reinforced thermosetting plastic pipes. Determination of resistance to the external pressure
GOST R 54560-2011 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54559-2011 Fibre reinforced thermosetting plastic pipes and parts of pipelines. Terms and definitions
GOST R 54559-2011(2020) Fibre reinforced thermosetting plastic pipes and parts of pipelines. Terms and definitions
GOST R 57602-2017 Fibre reinforced thermosetting plastic pipes and pipelines. Nondestructive testing methods with exploiting
GOST R 57034-2016 Fiber-reinforced thermosetting plastics pipes and parts of pipelines. Determination of resistance to short-time hydraulic pressure of plastic pipes and fittings
GOST R 57775-2017 Fiberglass-reinforced thermosetting plastic pipes. Structural design control method of parts of pipelines
GOST R 57035-2016 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Determination of resistance to cyclic internal pressure
GOST R 57570-2017 Fiberglass reinforced thermosetting plastic pipes. Determination of beam deflection under full bore flow
GOST R 56657-2015 Polymer composites. Method for determination of flexural properties of glass-fibre reinforced pultruded plastic rods
GOST R 55876-2017 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Test methods for leaktightness of flexible joints
GOST R 54924-2012 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods for determination of longitudinal tensile properties
GOST R 54924-2017 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods for determination of longitudinal tensile properties
GOST R 54925-2012 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods for determination of the apparent initial circumferential tensile strength

AT-ON, Anisotropic Fiber Reinforced Plastics

ONORM C 9712-1979 Unidirectional textile glass reinforced plastics; Determination of tensile properties

Professional Standard - Public Safety Standards, Anisotropic Fiber Reinforced Plastics

GA 179-1998 Technical specifications for burning properties of fire-retardant glass fiber reinforced plastics

ESDU - Engineering Sciences Data Unit, Anisotropic Fiber Reinforced Plastics

ESDU 85001 D-1995 Elastic stress and strain distributions around circular holes in infinite plates of orthotropic material (applicable to fibre reinforced composites).

National Association of Corrosion Engineers (NACE), Anisotropic Fiber Reinforced Plastics

NACE TM0298-1998 Evaluating the Compatibility of FRP Pipe and Tubulars with Oilfield Environments Item No 21233
NACE NO. 10-2002 Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks Item No: 21093; SSPC-PA 6

American Society for Testing and Materials (ASTM), Anisotropic Fiber Reinforced Plastics

ASTM D3916-08 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM D4476-97 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM D4476-03 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM D4476/D4476M-14 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM D3916-02 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM D3916-08(2016) Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM D3916-94 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM D5868-95 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D5868-01 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D5868-01(2008) Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D3917-96(2002)e1 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
ASTM D3917-96 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
ASTM D2343-17(2023) Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
ASTM D3917-08 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
ASTM D5868-01(2014) Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic 40;FRP41; Bonding
ASTM D2343-03 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
ASTM D2343-95 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

Canadian General Standards Board （CGSB), Anisotropic Fiber Reinforced Plastics

CGSB 41-GP-6M-1976 Norme: Feuilles Thermodurcissables De Plastique Polyester Renforcees De Fibres De Verre

国家能源局, Anisotropic Fiber Reinforced Plastics

SY/T 7369-2017 Test method for compatibility of fiber reinforced plastic pipes in oil field environment
SY/T 6770.5-2016 Specifications for Quality Acceptance of Non-metallic Pipes Part 5: Fiber Reinforced Thermoplastic Composite Coiled Pipes

国家建筑材料工业局, Anisotropic Fiber Reinforced Plastics

JC/T 490-1991 Dimensional tolerances for glass fiber reinforced thermoset plastic pultruded profiles

工业和信息化部, Anisotropic Fiber Reinforced Plastics

YD/T 1181.7-2022 Characteristics of non-metallic reinforcements for optical cables Part 7: Fiber-reinforced plastic flexible rods
YD/T 1181.1-2015 Characteristics of non-metallic reinforcements for optical cables Part 1: Glass fiber reinforced plastic rods
YD/T 1181.5-2018 Characteristics of non-metallic reinforcements for optical cables Part 5: Basalt fiber reinforced plastic rods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Anisotropic Fiber Reinforced Plastics

GB/T 3857-2017 Test method for chemical resistance of glass fiber reinforced thermosetting plastics

CEN - European Committee for Standardization, Anisotropic Fiber Reinforced Plastics

EN 1447:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure (Incorporates Amendment A1: 2010)
EN 17129:2018 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction

Society of Automotive Engineers (SAE), Anisotropic Fiber Reinforced Plastics

SAE AMS3599-2011 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin, Flammability Controlled
SAE AMS3642-1961 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN, Glass Fabric Reinforced Heat Resistant (500 F)
SAE AMS3642A-1965 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN Glass Fabric Reinforced Heat Resistant, 500 F (260 C)
SAE AMS3599B-2011 Plastic Sheet, Copper-Faced, Glass Fabric Reinforced Epoxy Resin, Flammability Controlled

KR-KS, Anisotropic Fiber Reinforced Plastics

KS M ISO 15306-2016 Glass-reinforced thermosetting plastics (GRP) pipes－Determination of the resistance to cyclic internal pressure
KS M ISO 3597-2-2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
KS M ISO 3597-3-2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
KS M ISO 3597-4-2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength

European Association of Aerospace Industries, Anisotropic Fiber Reinforced Plastics

AECMA PREN 2561-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Tensile Test Parallel to the Fibre Direction Issue P 1
AECMA PREN 2562-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Flexural Test Issue P 1
AECMA PREN 2329-1983 Test Method for the Determination of Mass per Unit Area of Woven Textile Glass Fibre Fabric Preimpregnate Aerospace Series Edition 1
AECMA PREN 2564-1988 Aerospace Series Carbon Fibre Laminates Test Method for the Determination of the Fibre and Resin Fractions and Porosity Content Issue P 1

DE-GPVA, Anisotropic Fiber Reinforced Plastics

AD 2000-Merkblatt N1-2006 Pressure vessels made of non-metallic materials.Pressure vessels in glass fibre reinforced thermosetting plastics
AD 2000-Merkblatt N1-2014 Pressure vessels made of non-metallic materials.Pressure vessels in glass fibre reinforced thermosetting plastics

ES-AENOR, Anisotropic Fiber Reinforced Plastics

UNE 53-301-1987

GOSTR, Anisotropic Fiber Reinforced Plastics

GOST 34646-2020 Fiberglass-reinforced thermosetting plastic pipes. Method for determination of resistance to cyclic internal pressure
GOST R 57949-2017 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Methods for regression analysis
GOST R 57783-2017 Fiberglass-reinforced thermosetting plastic pipes. Determination of creep factor under dry condition
GOST 34648-2020 Fiber-reinforced thermosetting plastic pipes and parts of pipelines. Determination of plastic pipes and fittings resistance to short-time internal hydraulic pressure

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Anisotropic Fiber Reinforced Plastics

PREN 2747-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Tensile Properties (Issue P 1)
PREN 4238-1995 Aerospace Series Fibre Reinforced Plastics Determination of the Effect of Dry Heat on Physical and Mechanical Characteristics

Professional Standard - Post and Telecommunication, Anisotropic Fiber Reinforced Plastics

YD/T 1181.1-2002 Characteristics of Non-metal Reinforcement Used for Optical Cable Part1: Glass Fiber Reinforced Plastic Rods

Professional Standard - Urban Construction, Anisotropic Fiber Reinforced Plastics

GB 51160-2016(英文版) English version of 7 engineering construction standards including fiber reinforced plastic equipment and pipeline engineering technical specifications

PT-IPQ, Anisotropic Fiber Reinforced Plastics

NP EN 1393-2000 Plastics piping systems Glass-reinforced thermosetting plastics(GPR) pipes Determination of initial longitudinal tensile properties
NP EN 1394-2000 Plastics piping systems Glass-reinforced thermosetting plastics(GRP) pipes Determination of the apparent initial circumferential tensile strength

GM Global, Anisotropic Fiber Reinforced Plastics

GMW 16970-2013 Guidelines for Conducting Axial Load-Controlled Fatigue Testing of Neat, Filled, and Short Fiber Reinforced Thermoplastic Polymeric Materials Issue 1; English

Aerospace, Security and Defence Industries Association of Europe (ASD), Anisotropic Fiber Reinforced Plastics

ASD-STAN PREN 2747-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Tensile Properties (Issue P 1)
ASD-STAN PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

IN-BIS, Anisotropic Fiber Reinforced Plastics

IS 12866-1989