ZH
RU
ES

liquid insulation

liquid insulation, Total:500 items.

In the international standard classification, liquid insulation involves: Commercial vehicles, Iron and steel products, Kitchen equipment, Burners. Boilers, Construction materials, Protection of and in buildings, Equipment for the chemical industry, Precision mechanics, Petroleum, petroleum products and natural gas handling equipment, Fluid power systems, Products of the textile industry, Clothes, Pharmaceutics, Elements of buildings, Ergonomics, Domestic, commercial and industrial heating appliances, Road vehicle systems, Standardization. General rules, Internal combustion engines for road vehicles, Thermodynamics and temperature measurements, Domestic safety, Products of the chemical industry, Fuels, Aircraft and space vehicles in general, Materials for aerospace construction, Air quality, Packaging materials and accessories, Analytical chemistry, Solar energy engineering, Fluid storage devices, Installations in buildings, Surface treatment and coating, Refrigerating technology, Refractories, Textile fibres, Small craft, Laboratory medicine, Insulating fluids, Transport, Explosion protection, Semiconducting materials, Protective equipment, Pesticides and other agrochemicals, Heat recovery. Thermal insulation, Rubber, Hospital equipment, Construction industry, Lubricants, industrial oils and related products, Shop fittings, Hydraulic fluids, Electronic display devices, Linear and angular measurements, Switchgear and controlgear, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Insulation, Equipment for petroleum and natural gas industries, Plant and equipment for the food industry, Valves, Geology. Meteorology. Hydrology, Petroleum products in general, Acoustics and acoustic measurements, Earthworks. Excavations. Foundation construction. Underground works, Pipeline components and pipelines, Measurement of volume, mass, density, viscosity, Optics and optical measurements, Electrical wires and cables, Glass, Company organization and management, Protection against fire, Electrical engineering in general, Occupational safety. Industrial hygiene, Ventilators. Fans. Air-conditioners, Mining and quarrying, Terminology (principles and coordination), Heat pumps.


Compressed Gas Association (U.S.), liquid insulation

Standard Association of Australia （SAA）, liquid insulation

German Institute for Standardization, liquid insulation

  • DIN 70001:2018 Road vehicles - Thermoinsulated dump bodies - Procedure for calcualtion of thermoinsulated dump bodies
  • DIN 70001:2018-04 Road vehicles - Thermoinsulated dump bodies - Procedure for calcualtion of thermoinsulated dump bodies
  • DIN EN 14150:2006 Geosynthetic barriers - Determination of permeability to liquids English version of DIN EN 14150:2006-09
  • DIN EN ISO 15831:2004 Clothing - Physiological effects - Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004); German version EN ISO 15831:2004
  • DIN EN ISO 15831:2004-05 Clothing - Physiological effects - Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004); German version EN ISO 15831:2004
  • DIN EN ISO 9920:2009-10 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007, Corrected version 2008-11-01); German version EN ISO 9920:2009
  • DIN EN 12066:1998-06 Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas; German version EN 12066:1997
  • DIN EN 12066:1998 Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas; German version EN 12066:1997
  • DIN EN ISO 9920:2007 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007); German version EN ISO 9920:2007
  • DIN 8958-2:1998-11 Testing of cooling equipment for insulated means of transportation - Part 2: Transport refrigerating system with eutectic elements, dry ice and cryogenic liquid gas / Note: To be replaced by DIN 8958-2 (2007-06, t), DIN 8958-2 (2010-04, t), DIN 8958-3 ...
  • DIN 4702-7:1996 Heating boilers - Part 7: Condensing boiler for liquid fuels
  • DIN 51900:2022-06 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value / Note: Date of issue 2022-05-06*Intended as replacement for DIN 51900-1 (2000-04), DIN 51900-1 Berichtigung 1 (20...
  • DIN 51900:2023-12 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value
  • DIN 51371:2008 Liquid fuels - Determination of thermal stability of fuel oil EL
  • DIN EN 61100:1994 Classification of insulating liquids according to fire-point and net calorific value (IEC 61100:1992); German version EN 61100:1992
  • DIN CEN/TR 15339-4:2020-11 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply; German version CEN/TR 15339-4:2014
  • DIN 51371:2008-08 Liquid fuels - Determination of thermal stability of fuel oil EL
  • DIN 51900-3:2005 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket
  • DIN 4127:1986 Earthworks and foundation engineering; diaphragm wall clays for supporting liquids; requirements, testing, supply, inspection
  • DIN 4754-3:2015 Heat transfer installations working with organic heat transfer fluids - Part 3: Level controller
  • DIN 4754-3:2015-03 Heat transfer installations working with organic heat transfer fluids - Part 3: Level controller
  • DIN 51900-3:2005-01 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket / Note: To be replaced by DIN 51900 (2022-06).
  • DIN 4754:1994 Heat transfer installations working with organic heat transfer fluids - Safety requirements, test
  • DIN EN 1117:2003 Heat exchangers - Liquid cooled refrigerant condensors - Test procedures for establishing the performance (includes amendment A1:2002); German version EN 1117:1998 + A1:2002
  • DIN EN 12102-1:2018 Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and
  • DIN EN 12102-1:2021 Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and
  • DIN 51900-2:2003 Testing of solid and liquid fuels - Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value - Part 2: Method using isoperibol ot static, jacket calorimeter
  • DIN 4127:2014 Earthworks and foundation engineering - Test methods for supporting fluids used in the construction of diaphragm walls and their constituent products
  • DIN 51900-1:2000-04 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods / Note: To be replaced by DIN 51900 (2022-06).
  • DIN 51900-2:2003-05 Testing of solid and liquid fuels - Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value - Part 2: Method using isoperibol ot static, jacket calorimeter / Note: To be replaced by DIN 51900 (2022-...
  • DIN 51900-1:2000 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods
  • DIN CEN/TR 15339-4:2020 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply; German version CEN/TR 15339-4:2014
  • DIN EN ISO 20088-1:2017 Determination of the resistance to cryogenic spillage of insulation materials - Part 1: Liquid phases (ISO 20088-1:2016); German version EN ISO 20088-1:2016
  • DIN ISO 1817:2016 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids (ISO 1817:2015)
  • DIN EN ISO 14895:2016-11 Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016); German version EN ISO 14895:2016
  • DIN 3398-4:1986 Pressure cut-off switches for liquid fuels and heat transfer oils
  • DIN EN ISO 11079:2008-04 Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects (ISO 11079:2007); German version EN ISO 11079:2007
  • DIN EN 14511-4:2008 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements; English version of DIN EN 14511-4:2008-02
  • DIN 53436-4:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids
  • DIN 94679-4:2023-03 Hydronic systems in heating, cooling and ventilation installations - Part 4: Temperature-based alternatives to hydronic balancing / Note: Date of issue 2023-02-17
  • DIN 4754-1:2015 Heat transfer installations working with organic heat transfer fluids - Part 1: Safety requirements, test

ZA-SANS, liquid insulation

  • CKS 30-1985 Non-insulated stainless steel food containers (for solid food, liquid food and water)
  • SANS 158:2003 Electrical appliances for heating liquids

American National Standards Institute （ANSI), liquid insulation

HU-MSZT, liquid insulation

Association Francaise de Normalisation, liquid insulation

  • NF EN IEC 60475:2022 Méthode d'échantillonnage des liquides isolants
  • NF EN IEC 60867:2022 Isolants liquides - Spécifications pour les liquides neufs à base d'hydrocarbures aromatiques de synthèse
  • NF EN ISO 15831:2004 Vêtements - Effets physiologiques - Mesurage de l'isolation thermique à l'aide d'un mannequin thermique
  • NF C27-230:1986 Gassing des isolants liquides sous contrainte électrique et ionisation
  • NF EN 60970:2007 Isolants liquides - Méthodes de détermination du nombre et de la taille des particules
  • NF D35-001:1965 Choice of an individual heating unit (solid, liquid and gaseous fuels) according to the volume to be heated.
  • NF EN 60156:1995 Isolants liquides - Détermination de la tension de claquage à fréquence industrielle - Méthode d'essai
  • NF EN ISO 9920:2009 Ergonomie des ambiances thermiques - Détermination de l'isolement thermique et de la résistance à l'évaporation d'une tenue vestimentaire
  • NF EN 61099:2011 Liquides isolants - Spécifications relatives aux esters organiques de synthèse neufs destinés aux matériels électriques
  • NF P16-442:2007 Installation and maintenance of light liquids separators and sludge traps
  • NF M07-030:1996 Combustibles liquides pétroliers - Détermination du pouvoir calorifique
  • NF E31-503:1978 Heat machines.hot air generators with liquid fuels.
  • NF EN 13950:2014 Complexes d'isolation thermique/acoustique en plaques de plâtre et isolant - Définitions, spécifications et méthodes d'essai
  • NF P50-501:1980 Liquid circulation solar detecting elements. Measurement ofthermal performances.
  • NF P50-103:1988 Solar energy. Hot water tanks heated by heat transfer fluids. Vocabulary.
  • NF J95-047*NF EN ISO 14895:2016 Small craft - Liquid-fuelled galley stoves and heating appliances
  • NF T46-013:2011 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids.
  • NF EN 61619:1997 Isolants liquides - Contamination par les polychlorobiphényles (PCB) - Méthode de détermination par chromatographie en phase gazeuse sur colonne capillaire.
  • FD A91-231-4*FD CEN/TR 15339-4:2015 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4 : gas and liquid fuel supply
  • FD CEN/TR 15339-4:2015 Projection thermique - Exigences de sécurité relatives au matériel de projection thermique - Partie 4 : alimentation en gaz et en combustible liquide
  • NF EN ISO 14895:2016 Petits navires - Réchauds de cuisine et appareils de chauffage alimentés par un combustible liquide
  • NF ISO 1817:2022 Caoutchouc vulcanisé ou thermoplastique - Détermination de l'action des liquides
  • NF D40-001:1989 Equipment for collective restaurants. Fast chilling cells, freezing cells, reheating equipments and isothermic containers. Measuring of thermic performances.
  • NF M07-112:2004 Produits pétroliers liquides - Dosage du benzène dans les combustibles liquides pour appareils mobiles de chauffage - Méthode par chromatographie capillaire en phase gazeuse
  • NF EN 61100:1992 Classification des isolants liquides selon le point de feu et le pouvoir calorifique inférieur
  • NF D35-323:1991 Heating. Gas. Liquid fuel, solid fuel. Gas hurning appliances for instantaneous production of hot water for domestic use, intended to be connected to a mechanical installation for the evacuation of combustion products.
  • NF T46-013*NF ISO 1817:2015 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
  • NF D30-003:1992 Heating. Gas. Liquid fuels, gaseous fuel. Double hot water central heating boilers. Determination of hot water production system parameters necessary for application of the heat rules.
  • NF EN 1118/A1:2003 Échangeurs thermiques - Refroidisseurs de liquides - Procédures d'essai pour la détermination de la performance
  • NF B35-512:1983 Laboratory glassware. Glass hydrometers. Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids).
  • NF D35-334:1985 Equipment for the conversion to gas of central heating boilers built for solid and liquid fuels. Atmospheric burners.
  • NF P75-304:1987 Isolants thermiques de bâtiment manufacturés - Détermination de l'absorption d'eau par capillarite des isolants rigides et semi-rigides - Non hydrophilie.
  • NF T46-013:1985 Vulcanized or thermoplastic rubber. Determination of the action of liquids.
  • NF EN 12178:2017 Systèmes de réfrigération et pompes à chaleur - Indicateurs de liquide - Exigences, essais et marquage
  • NF S31-121-1*NF EN 12102-1:2017 Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1 : air conditioners, liquid chilling packages, heat pumps for space heating an
  • NF P75-440:2013 Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
  • NF P75-440/IN1:2013 Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
  • NF EN 15199-2:2020 Produits pétroliers - Détermination de la répartition dans l'intervalle de distillation par méthode de chromatographie en phase gazeuse - Partie 2 : fiouls lourds et fiouls résiduels
  • NF D35-337:2001 Heating - Gas - Liquid fuel, solid fuel - Gas-fired central heating boilers of heat output not exceeding 70 kW designed to be connected to a mechanical installation for the evacuation of the combustion products.
  • UTE C32-023U*UTE C32-023:1993 Physico-chemical characteristics of thermoplastic materials after immersion in agressive liquids.
  • NF EN 14814:2016 Adhésifs pour systèmes de canalisations thermoplastiques pour liquides sous pression - Spécifications
  • NF UTE C32-023:1993 Caractéristiques physicochimiques des matériaux thermoplastiques après immersion dans les liquides agressifs
  • NF P51-002-2/IN1:2009 Chimneys - Thermal and fluid dynamic calculation methods - Part 2 : chimneys serving more than one heating appliance.
  • NF EN ISO 20765-2:2018 Gaz naturel - Calcul des propriétés thermodynamiques - Partie 2 : propriétés des phases uniques (gaz, liquide, fluide dense) pour une gamme étendue d'applications
  • NF EN ISO 21029-2:2015 Récipients cryogéniques - Récipients transportables, isolés, sous vide, d'un volume n'excédant pas 1 000 litres - Partie 2 : exigences de fonctionnement
  • NF EN 60076-2:2011 Transformateurs de puissance - Partie 2 : échauffement des transformateurs immergés dans le liquide
  • NF EN ISO 9771:1997 Plastiques - Résines phénoliques - Détermination de l'élévation de température pseudoadiabatique des résols liquides thermodurcis en conditions acides.

Military Standards (MIL-STD), liquid insulation

IN-BIS, liquid insulation

(U.S.) Ford Automotive Standards, liquid insulation

CZ-CSN, liquid insulation

  • CSN 36 1230-1972 Appliances for heating liquids
  • CSN 36 1332-1983 Particular reguirements for appliances for heating Liguids
  • CSN 06 1510-1981 Air heaters for liguid and gas fuels with fan
  • CSN 36 1333-1984 Electrical appliances for heating liquids. Measurement of the peiformance characteristics
  • CSN 25 8301-1984 Industrial thermocouple and resistance temperature sensors for fluids
  • CSN 07 0015-1981 Safety technique. Liquid and steam boilers with organic heating medium. Requirements according to heating system
  • CSN 06 0212-1989 Flat solar collectors for heating of li-quids. Determination of power effici-ency and hydraulic resistence
  • CSN 07 0009-1983 Safety technique. Liquid and steam boilers with organic heating medium. Pasport

RO-ASRO, liquid insulation

  • STAS 11553-1986 HEAT-INSULATING GLASS WITH PUTTY Typification
  • STAS 12625-1988 SOLAR COLLECTORS FLAT SOLAR COLLECTORS USING GASES OR LIQUIDS AS TRANS- FER FLUID Checking up methods of mechanical characteristics
  • STAS 11775-1980 Heat treatment equipment ROLLER HEARTH CHAMBER FURNACES HEATED WITH GAS OR LIQUID FUEL Main parameters
  • STAS 12972-1991 Plain solar collectors with liquid thermic agent. Direct absorption collectors with steelflat oval pipe
  • STAS 11783-1980 Heating furnaces for hot plastic deformation pourposeROTING HEARTH FURNACES HEATEDWITH GAS OR LIQUID FUEL Main parameters
  • STAS 11782-1980 Heating equipment for Plastic deformation purpose CHAMBER FURNACES HEATED WITH GAS OK LIQUID FUEL Main parameter*
  • STAS 12456/1-1986 Solar collectors FLAT-PLATE LIQUID TYPE SOLAR COLLECTORS Determination of the thermal efficiency under natural solar irradiation

British Standards Institution (BSI), liquid insulation

  • BS EN ISO 20088-1:2016 Determination of the resistance to cryogenic spillage of insulation materials. Liquid phases
  • BS EN 14150:2006 Geosynthetic barriers - Determination of permeability to liquids
  • BS 7420:1991 Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)
  • BS PD CEN/TR 15339-4:2014 Thermal spraying. Safety requirements for thermal spraying equipment. Gas and liquid fuel supply
  • BS EN ISO 9920:2010 Ergonomics of the thermal environment. Estimation of thermal insulation and water vapour resistance of a clothing ensemble
  • BS EN ISO 9920:2009 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble
  • BS EN 61100:1993 Classification of insulating liquids according to fire point and net calorific value
  • BS 5076:1974 Specification for hospital storage cabinets for bottled fluids (electrically heated)
  • BS ISO 1817:2015 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
  • BS ISO 1817:2006 Rubber, vulcanized. Determination of the effect of liquids
  • BS ISO 1817:2011 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
  • BS EN ISO 12569:2001 Thermal insulation in buildings. Determination of air change in buildings. Tracer gas dilution method
  • BS EN ISO 14895:2016 Small craft. Liquid-fuelled galley stoves and heating appliances
  • BS ISO 1817:2022 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
  • PAS 5420:2023 Liquid fuels. Sustainable bioliquid fuels for use in fixed combustion applications for heating, hot water and cooking. Specification
  • DD IEC/TS 62332-1:2011 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components - General requirements
  • 23/30470434 DC BS ISO 1817. Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
  • BS EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
  • BS EN 12115:2021 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
  • BS DD IEC/TS 62332-1:2011 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components. General requirements
  • PD IEC/TS 62332-2:2014 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components. Simplified test
  • DD IEC/TS 60695-8-3:2008 Fire hazard testing - Heat release. Heat release of insulating liquids used in electrotechnical products
  • BS EN 12102-1:2022 Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors. Determination of the sound power level. Air conditioners, liquid chilling packages, heat pumps for space h...
  • BS ISO 4433-1:1997 Thermoplastic pipes. Resistance to liquid chemicals. Classification. Immersion test method
  • BS ISO 4433-2:1997 Thermoplastics pipes. Resistance to liquid chemicals. Classification. Polyolefin pipes
  • BS EN ISO 20765-2:2018 Natural gas. Calculation of thermodynamic properties. Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application
  • BS EN 14511-4:2007 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Requirements
  • BS EN 14511-4:2011 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Requirements
  • 22/30426288 DC BS ISO 5352. Hydraulic fluid power. Determining discharge flow rate and thermal losses of gas loaded accumulators
  • BS ISO 4433-2:1998 Thermoplastics pipes - Resistance to liquid chemicals - Classification - Polyolefin pipes
  • PD IEC/TS 62332-3:2016 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components. Hermetic motor-compressors
  • BS ISO 5352-1:2023 Hydraulic fluid power. Determination of discharge flow rate and thermal losses of gas loaded accumulators - Test method
  • BS EN 60335-2-15:2016+A12:2021 Household and similar electrical appliances. Safety - Particular requirements for appliances for heating liquids
  • BS EN 14511-4:2004 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Requirements
  • BS EN 14511-3:2007 Air conditioners, liquid chilling packages and heat pumps with electrical driven compressors for space heating and cooling - Test methods
  • BS EN 14511-3:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test methods
  • BS EN 14511-2:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test conditions
  • BS EN 14511-3:2022 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test methods

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), liquid insulation

  • AHRI 400 I-P-2015 Performance Rating of Liquid to Liquid Heat Exchangers
  • AHRI 400-2001 Liquid To Liquid Heat Exchangers (Addendum 1: 06/2003; Addendum 2: 04/2005)

Professional Standard - Machinery, liquid insulation

  • JB/T 7038-2006 Hydraulic fluid power.The shell of accumulators with separator.Technique requirements
  • JB/T 7038-1993 Specifications for housings of hydraulically isolated accumulators
  • JB/T 5905-2000 Cryogenic liquid containers insulated with evacuated multilayer insulations
  • JB/T 9072-1999 Stationary cryogenic liquid storage tanks with evacuated powder insulation
  • JB/T 53146-1999 Vacuum multi-layer insulation cryogenic liquid container product quality classification
  • JB/T 53140-1999 Product Quality Grading of Stationary Vacuum Powder Insulated Cryogenic Liquid Storage Tank

European Committee for Standardization (CEN), liquid insulation

  • EN 14150:2006 Geosynthetic barriers - Determination of permeability to liquids
  • PD CEN/TR 15339-4:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply
  • EN ISO 14895:2016 Small craft - Liquid-fuelled galley stoves and heating appliances
  • prEN 12102-1-2021 Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and
  • EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
  • EN 14511-3:2011 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods
  • EN 14511-3:2022 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods

Korean Agency for Technology and Standards (KATS), liquid insulation

  • KS K 0937-2012 Geosynthetic barriers－Determination of permeability to liquids
  • KS K ISO 15831:2021 Clothing — Physiological effects — Measurement of thermal insulation by means of a thermal manikin
  • KS K ISO 15831:2015 Clothing-Physiological effects-Measurement of thermal insulation by means of a thermal manikin
  • KS R 1049-2020 Road vehicles — Performance test method for insulated bodies of refrigerated vehicles
  • KS R 1049-1985 Road vehicles — Performance test method for insulated bodies of refrigerated vehicles
  • KS A 5556-2006(2021) Ergonomics of the thermal environment－Estimation of the thermal insulation and evaporative resistance of a clothing ensemble
  • KS A 5556-2006(2016) Ergonomics of the thermal environment－Estimation of the thermal insulation and evaporative resistance of a clothing ensemble
  • KS B 6878-2011(2021) Cabinet heater cylinders for liquefied butane gas
  • KS B ISO 9806-1-2003(2013) Test methods for solar collectors－Part 1：Thermal performance of glazed liquid heating collectors including pressure drop
  • KS M ISO 8310-2003(2008) Refrigerated light hydrocarbon fluids－Measurement of temperature in tanks containing liquefied gases－Resistance thermometers and thermocouples
  • KS M ISO 1817:2010 Rubber, vulcanized-Determination of the effect of liquids
  • KS B ISO 1768:2007 Glass hydrometers－Conventional value for the thermal cubic expansion coefficient(for use in the preparation of measurement tables for liquids)
  • KS B ISO 9806-3:2003 Test methods for solar collectors-Part 3:Thermal performance of unglazed liquid heating collectors (sensible heat transfer only) including pressure drop
  • KS B ISO 9806-3-2003(2013) Test method for solar collectors - Part 3 : Thermal performance of unglazed liquid heating collectors (sensible heat transfer only) including pressure drop

KR-KS, liquid insulation

  • KS K ISO 15831-2021 Clothing — Physiological effects — Measurement of thermal insulation by means of a thermal manikin

国家食品药品监督管理局, liquid insulation

  • YY/T 1499-2016 Liquid barrier properties and classification of medical protective clothing

ESDU - Engineering Sciences Data Unit, liquid insulation

  • ESDU 86007 B-2003 Heat capacity and enthalpy of liquids: alkanes.
  • ESDU 97010-1997 Thermal conductivity of liquids: Aliphatic amines.
  • ESDU 93017 A-2005 Thermal conductivity of liquids: Carboxylic acids.
  • ESDU 93017-1993 Thermal conductivity of liquid carboxylic acids
  • ESDU 75015 A-2003 Heat capacity and enthalpy of liquids: aromatic hydrocarbons.
  • ESDU 79028 B-2005 Heat capacity and enthalpy of liquids: aliphatic alcohols.
  • ESDU 79028 A-2003 Heat capacity and enthalpy of liquids: Aliphatic alcohols
  • ESDU 88004 A-2005 Thermal conductivity of liquids: Mixtures.
  • ESDU 93008-1993 Thermal conductivity of liquids: Aliphatic alcohols.
  • ESDU 88004-1988 Thermal conductivity of liquid mixtures
  • ESDU 84010 A-2005 Thermal conductivity of liquids: Aromatic hydrocarbons.
  • ESDU 76010 B-2003 Heat capacity and enthalpy of liquids: halogenated methanes.
  • ESDU 81030 A-2003 Heat capacity and enthalpy of liquids: aliphatic ketones.
  • ESDU 99013 B-2005 Thermal conductivity of liquids: Glycols@ glycerol and their aqueous solutions.
  • ESDU 76030-1976 Thermal conductivity of carbon dioxide gas and liquid.
  • ESDU 86023 A-2003 Heat capacity and enthalpy of liquids: alkenes and alkadienes.
  • ESDU 95018 A-2005 Thermal conductivity of liquids: Aliphatic ethers.
  • ESDU 98018 A-2005 Thermal conductivity of liquids: Halogenated aromatic hydrocarbons.
  • ESDU 00021 A-2005 Thermal conductivity of liquids: Aliphatic nitriles.
  • ESDU 95008-1995 Thermal conductivity of liquids: Glycol ethers.
  • ESDU 95018-1995 Thermal conductivity of liquid Aliphatic ethers
  • ESDU 99012 A-2005 Thermal conductivity of liquids: Aliphatic diesters.
  • ESDU 96018 A-2005 Thermal conductivity of liquids: Straight chain aliphatic esters.
  • ESDU 97008-1997 Thermal conductivity of liquid Aliphatic aldehydes and ketones
  • ESDU 99012-1999 Thermal conductivity of liquid aliphatic diesters
  • ESDU 77007 A-2003 Heat capacity and enthalpy of liquids: halogenated ethanes and ethylenes.
  • ESDU 96023 A-2005 Thermal conductivity of liquids: Branched chain aliphatic esters.
  • ESDU 97008 A-2005 Thermal conductivity of liquids: Aliphatic aldehydes and ketones.
  • ESDU 83015 A-2005 Thermal conductivity of liquids: Heterocyclic nitrogen compounds.
  • ESDU 83015-1983 Thermal conductivity of liquid heterocyclic nitrogen compounds
  • ESDU 05020-2005 Thermal conductivity of liquids: Aliphatic hydrocarbons. Part 1. Alkanes.
  • ESDU 00050-2001 Thermal conductivity of liquids: Aromatic compounds containing nitrogen.
  • ESDU 02002 A-2005 Thermal conductivity of liquids: Aromatic compounds containing oxygen.
  • ESDU 85024 A-2003 Heat capacity and enthalpy of liquids: organic sulphur compounds (thiols and sulphides).
  • ESDU 89002 B-2003 Thermophysical properties of benzene: Part 1. The ideal gas and the saturated liquid and vapour.
  • ESDU 88009 B-1994 Thermophysical properties of toluene. Part I: the ideal gas and the saturated liquid and vapour.
  • ESDU 94022 A-2005 Thermal conductivity of liquids: Halogenated aliphatic hydrocarbons. Part 2. Halogenated ethanes.
  • ESDU 98002-1998 Thermal conductivity of liquids: Aliphatic amino-alcohols@ diamines and nitroalkanes.
  • ESDU 89017 A-1990 Thermophysical properties of isopropyl alcohol Part 1: The ideal gas and the saturated liquid and vapour
  • ESDU 05021-2005 Thermal conductivity of liquids: Aliphatic hydrocarbons. Part 2. Alkenes@ dienes and trienes.
  • ESDU 89017 B-2003 Thermophysical properties of propan-2-ol (isopropyl alcohol): Part 1. The ideal gas and the saturated liquid and vapour.

AT-ON, liquid insulation

  • ONORM M 5921-1988 Heatmeters (meters for quantities of heat) for liquid heat carrier fluids; requirements for measurement
  • ONORM M 5920-1988 Heatmeters (meters for quantities of heat) for liquid heat carrier fluids; general basic Information
  • ONORM M 5922-1982 Heatmeters (meters for quantities of heat) for liquid carrier fluids; directives for dimensioning and installation
  • ONORM M 7521-1976 Room-heating capacity of stoves for solid and liquid fuels
  • OENORM EN 12102-1-2021 Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and
  • OENORM H 7510-3-2021 Checking of heating systems - Part 3: Comprehensive verification of firing systems for liquid and gaseous fuels
  • OENORM H 7510-2-2021 Checking of heating systems - Part 2: Basic check of firing systems for liquid and gaseous fuels

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., liquid insulation

  • ASHRAE MN-00-7-1-2000 Surface Temperature Measurements Inside an Insulated Glazing Unit Using Liquid Crystals
  • ASHRAE 3846-1995 Experimental Study of Heat Transfer Through Liquid Foam
  • ASHRAE DA-07-011-2007 Liquid Cooling for Extreme Heat Densities
  • ASHRAE 3971-1996 Prediction of Liquid Superheat Around Spherical Bubbles
  • ASHRAE 3861-1995 Theory for Heat Exchangers with Liquid-Desiccant-Wetted Surfaces
  • ASHRAE 96-1980 Methods of Testing to Determine the Thermal Performance of Unglazed Flat-Plate Liquid-Type Solar Collectors (R 1989)
  • ASHRAE 109-1986 Methods of Testing to Determine the Thermal Performance of Flat-Plate Solar Collectors Containing a Boiling Liquid
  • ASHRAE 3694-1993 Demonstration of a High- Temperature Heat Pump for Minimizing Liquid Indutrial Waste

General Motors Corporation (GM), liquid insulation

U.S. Air Force, liquid insulation

RU-GOST R, liquid insulation

  • GOST R 56734-2015 Buildings and constructions. The calculation of thermal protection of walls with reflective insulation
  • GOST 28947-1991 Glass Hydrometers. Conventional value for tne thermal cubic expasion coefficient (for use in tne preparation of measurement table for liquids)
  • GOST ISO 15831-2013 Clothing. Physiological effects. Method for measurement of thermal insulation by means of thermal manikin
  • GOST ISO 11612-2014 Occupational safety standards system. Clothing for protection against heat and flame. General and performance requirements
  • GOST 20944-1975 Liquids for aircrafts systems. Method for determination thermooxidizing stability and corrosion activity
  • GOST R 8.931-2016 State system for insuring the uniformity of measurements. Cold and hot water meters. Calibration interval evaluation
  • GOST R 8.722-2010 State system for ensuring the uniformity of measurements. Conductometric liquid analyses. Verification procedure
  • GOST 12027-1993 Sustallations of heat exchangers with plate exchangers for food liquids. Technical requirements, safety requiremens
  • GOST ISO 1817-2016 Vulcanized rubber and thermoelastoplasts. Determination of resistance to the effect of liquids
  • GOST 12.2.008-1975 Labour safety standards system. Equipment and apparatus for gas-flaming processing of metals and for thermal dusting of coatings. Safety requirements
  • GOST ISO 14116-2016 Occupational safety standards system. Clothing and materials for protection against heat and flame. Limited flame spread. Requirements for fire-resistance
  • GOST R ISO 12127-1-2011 Occupational safety standards system. Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials. Part 1. Test method using heat produced by heating cylinder
  • GOST R 50047-1992 Installations of heat exchangers with plate exchangers for food liquids. Technical requirements, safety requiremens
  • GOST 15156-1984 Lubricating oils, lubricants and special liquids for industrial use in tropical climate regions

Danish Standards Foundation, liquid insulation

  • DS/EN ISO 9920:2009 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble
  • DS/EN 1094-4:1996 Insulating refractory products - Part 4: Determination of bulk density and true porosity
  • DS/ENV 1397:1995 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
  • DS/IEC/TS 62332-1:2011 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements

ES-UNE, liquid insulation

  • UNE-EN ISO 9920:2009 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007, Corrected version 2008-11-01) (Endorsed by AENOR in June of 2010.)
  • UNE-CEN/TR 15339-4:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply (Endorsed by Asociación Española de Normalización in October of 2021.)
  • UNE-EN ISO 14895:2016 Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016)
  • UNE-ISO 1817:2018 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
  • UNE 43312:1982 ERRATUM:2011 Glass hydrometers. Conventional value for the thermal cubic-expansion coefficient (for use in the preparation of measurement tables for liquids)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), liquid insulation

SAE - SAE International, liquid insulation

  • SAE ARP88-2004 HEATER@ AIRPLANE@ LIQUID TYPE
  • SAE AIR1168/9-1991 Thermophysical Properties of the Natural Environment@ Gases@ Liquids@ and Solids
  • SAE AMS4241B-2002 Aluminum Alloy Castings 7.0Si 0.58Mg 0.15Ti 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled
  • SAE AS6450-2011 Lubricant Application@ Solid Film@ Heat Cured@ Potable Water@ Hydraulic@ and Other Fluid Systems
  • SAE AS6450A-2012 Lubricant Application@ Solid Film@ Heat Cured@ Potable Water@ Hydraulic@ and Other Fluid Systems
  • SAE AS6450B-2019 Lubricant Application@ Solid Film@ Heat Cured@ Potable Water@ Hydraulic@ and Other Fluid Systems

Hebei Provincial Standard of the People's Republic of China, liquid insulation

  • DB13/T 1179-2010 liquid circulation exhaust heater
  • DB13/T 5223-2020 Method for Determination of Voltage Holding Rate of Nematic Thermotropic Liquid Crystal Monomer
  • DB13/T 5222-2020 Determination of Purity of Nematic Thermotropic Liquid Crystal Monomer by Gas Chromatography
  • DB13/T 5537-2022 Determination of Resistivity of Nematic Thermotropic Liquid Crystal Monomer by DC Voltage Method

Canadian Standards Association (CSA), liquid insulation

Group Standards of the People's Republic of China, liquid insulation

  • T/GBECA 001-2018 Technical specification for Building wall thermal insulation system with thermal insulating putty
  • T/CVDA 6-2019 Veterinary oral liquid heat-seal plastic bottle
  • T/NAIA 0138-2022 Determination method of calorific value of light liquid fuel oil (oxygen bomb calorimetry)
  • T/FCEAS 004-2021 Specification for Application of EPS Cavity Module Thermal Insulation Concrete-wall
  • T/ZZB 2835-2022 Filmwise electric heating elements used for household and similar liquid heaters
  • T/CNITA 09111-2023 High air permeability and high liquid barrier performance composite nonwoven for disposable hygiene products
  • T/CECS 1046-2022 Technical specification for energy-saving system of reflective heat-insulating coating composite heat-insulating cement wall
  • T/SBX 026-2019 Determination of Melting Point of Liquid Crystal Monomer by Differential Scanning Calorimetry
  • T/ZZB 1514-2020 Liquid expansion pressure-type temperature control for heating appliance
  • T/SBX 027-2019 Determination of Resistivity of Nematic Thermotropic Liquid Crystal Monomer by DC Voltage Method
  • T/CAMDI 003-2016 Styrene thermoplastic elastomer (TPE) special material for infusion and blood transfusion equipment

American Society for Testing and Materials (ASTM), liquid insulation

  • ASTM F1720-17 Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
  • ASTM D7896-19 Standard Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
  • ASTM C449-07(2019) Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
  • ASTM D2766-95(2005) Standard Test Method for Specific Heat of Liquids and Solids
  • ASTM D2766-95(2000) Standard Test Method for Specific Heat of Liquids and Solids
  • ASTM D2766-95(2009) Standard Test Method for Specific Heat of Liquids and Solids
  • ASTM D2766-95 Standard Test Method for Specific Heat of Liquids and Solids
  • ASTM F1291-99 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
  • ASTM F1291-22 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
  • ASTM E1225-99 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
  • ASTM F34-13(2018) Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
  • ASTM F1291-05 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
  • ASTM F1291-15 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
  • ASTM D2717-95(2005) Standard Test Method for Thermal Conductivity of Liquids
  • ASTM D2717-95 Standard Test Method for Thermal Conductivity of Liquids
  • ASTM D7544-12(2017) Standard Specification for Pyrolysis Liquid Biofuel
  • ASTM D7579-09 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
  • ASTM D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
  • ASTM D757-77 Standard test method for determination of pyrolysis solids content in pyrolysis liquids by methanol solids filtration method
  • ASTM D7544-10 Standard Specification for Pyrolysis Liquid Biofuel
  • ASTM D7544-23 Standard Specification for Pyrolysis Liquid Biofuel
  • ASTM D7544-12 Standard Specification for Pyrolysis Liquid Biofuel
  • ASTM E1225-04 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
  • ASTM E1225-09 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
  • ASTM E1225-13 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
  • ASTM D7579-09(2013) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
  • ASTM D6743-06 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
  • ASTM D7150-13(2020) Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress
  • ASTM D5372-04 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
  • ASTM D5372-04(2009) Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
  • ASTM D7863-13 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
  • ASTM D7896-14 Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
  • ASTM D7863-22 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
  • ASTM D7863-17 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
  • ASTM C166-05(2023) Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
  • ASTM D3523-92(2002) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
  • ASTM D3523-92(2007) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
  • ASTM D3523-92(1997) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
  • ASTM D2890-92(1996) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
  • ASTM E947-83(2007) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
  • ASTM D8039-16 Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems
  • ASTM D2890-92(2018) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
  • ASTM C166-05 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
  • ASTM C166-05(2010) Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
  • ASTM D3523-92(2012) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
  • ASTM E1008-97 Standard Practice for Installation, Inspection, and Maintenance of Valve Body Pressure Relief Methods for Geothermal and Other High-Temperature Liquid Applications
  • ASTM F2701-08 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with a Hot Liquid Splash
  • ASTM D2890-92(2003) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
  • ASTM D8040-17 Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
  • ASTM D8040-18 Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
  • ASTM D2890-92(2013) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
  • ASTM D2890-23 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
  • ASTM E947-22 Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
  • ASTM D7150-13 Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress
  • ASTM D2890-92(2008) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels

TH-TISI, liquid insulation

US-FCR, liquid insulation

Xizang Provincial Standard of the People's Republic of China, liquid insulation

  • DB54/T 0267-2022 Application technical specification for thermal insulation and sound insulation integrated window engineering

United States Navy, liquid insulation

Society of Automotive Engineers (SAE), liquid insulation

  • SAE AIR1168/9-2004 Thermophysical Properties of the Natural Environment, Gases, Liquids, and Solids
  • SAE AIR1168/9A-2011 Thermophysical Properties of the Natural Environment, Gases, Liquids, and Solids
  • SAE AMS-H-81829A-1998 Heat Transfer Fluid, Fluorochemical
  • SAE AIR1168/1-1990(R2004) Thermodynamics of Incompressible and Compressible Fluid Flow
  • SAE AMS4241D-2009 Aluminum Alloy Castings 7.0Si 0.58Mg 0.15Ti 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled
  • SAE AMS4590C-2009 Extrusions, Nickel-Aluminum Bronze, Martensitic 78.5Cu 10.5Al 5.1Ni 4.8Fe Solution Heat Treated and Tempered (TQ50)

BE-NBN, liquid insulation

U.S. Military Regulations and Norms, liquid insulation

CA-SCC, liquid insulation

SE-SIS, liquid insulation

  • SIS SS 1782-1981 Heating equipment - Thermal solar collector with liquid as heat transfer fluid - Determination of thermal performance

Professional Standard - Recommended Standards for Engineering Construction, liquid insulation

  • CECS 346-2013 Technical specification for wall thermal insulation system with thermal insulating thick putty

NL-NEN, liquid insulation

  • NEN 1884-1980 Liquid fueis - Determination of the gross calorie value with an adiabatic calorimeter and derivation of the net calorific value
  • NEN 11100-1993 Insulating liquids for electrical purposes. Classification according to fire-point and net calorific value (IEC 1100:1992)

International Organization for Standardization (ISO), liquid insulation

  • ISO 9920:2007 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble
  • ISO 2477:2005 Shaped insulating refractory products - Determination of permanent change in dimensions on heating
  • ISO 2477:1987 Shaped insulating refractory products; Determination of permanent change in dimensions on heating
  • ISO 14895:2016 Small craft - Liquid-fuelled galley stoves and heating appliances
  • ISO 1817:2022 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
  • ISO/DIS 1817:1971 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
  • ISO/FDIS 1817:2023 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
  • ISO 1817:2011 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
  • ISO 1817:2015 "Rubber, vulcanized or thermoplastic - Determination of the effect of liquids"
  • ISO 1768:1975 Glass hydrometers; Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)
  • ISO 9806-1:1994 Test methods for solar collectors - Part 1: Thermal performance of glazed liquid heating collectors including pressure drop
  • ISO 8311:2013 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels.Calibration of membrane tanks and independent prismatic tanks in ships.Manual and internal electro-optical distance-ranging methods

Guangdong Provincial Standard of the People's Republic of China, liquid insulation

工业和信息化部, liquid insulation

  • JB/T 13369-2018 Powder insulated low pressure cryogenic liquid storage tank

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), liquid insulation

  • ARI 400-2001 Liquid to Liquid Heat Exchangers Addendum 1: 06/2003; Addendum 2: 04/2005

未注明发布机构, liquid insulation

  • BS 7420:1991(1999) Guide for Determination of calorific values of solid, liquid and gaseous fuels (including definitions)
  • DIN EN ISO 9920:2004 Ergonomics of the ambient climate – Estimation of the thermal insulation and evaporation resistance of a clothing combination

CO-ICONTEC, liquid insulation

IT-UNI, liquid insulation

ES-AENOR, liquid insulation

AENOR, liquid insulation

  • UNE-EN 61100:1996 CLASSIFICATION OF INSULATING LIQUIDS ACCORDING TO FIRE POINT AND NET CALORIFIC VALVE.
  • UNE-EN 1094-4:1996 Insulating refractory products - Part 4: Determination of bulk density and true porosity
  • UNE-ISO 8310:2005 Refrigerated light hydrocarbon fluids -- Measurement of temperature in tanks containing liquefied gases -- Resistance thermometers and thermocouples

Indonesia Standards, liquid insulation

  • SNI ISO 5016:2010 Shaped insulating refractory products - Determination of bulk density and true porosity
  • SNI ISO 1817:2012 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids

Professional Standard - Traffic, liquid insulation

  • JT/T 1046-2016 Explosion suppression safety technical requirements for road transportation vehicle fuel tank and liquid fuel transportation tank

Universal Oil Products Company (UOP), liquid insulation

  • UOP 649-2010 Total Oxygen in Solid, Semi-solid, and High Boiling Point Liquid Hydrocarbons by Pyrolysis

GOSTR, liquid insulation

  • GOST ISO 11612-2020 Occupational safety standards system. Protective clothing to protect from short-term exposure to open flames, heat radiation, convective heat, molten metal splashes, heated contact. Technical requirements and test methods
  • GOST R 58536.1-2019 Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors. Determination of the sound power level. Part 1. Air conditioners, liquid chilling packages, heat pumps for space heating and c

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, liquid insulation

  • GB/T 2998-2015 Test method for bulk density and true porosity of shaped heat insulating refractory products
  • GB/T 2998-2001 Shaped insulating refractory products-Determination of bulk density and true porosity
  • GB 18418-2001 Domestic sanitary insecticide Electrothermal mosquito liquid incense
  • GB/T 1690-2006 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
  • GB/T 1690-2010 Rubber,vulcanized or thermoplastic.Determination of the effect of liquids
  • GB/T 22578.1-2008 Electrical insulation systems(EIS).Thermal evaluation of combined liquid and solid components.Part1:General requirements
  • GB/Z 5169.32-2013 Fire hazard testing for electric and electronic products.Part 32:Heat release.Heat release of insulating liquids
  • GB 4706.19-1999 Safety of household and similar electrical appliances Particular requirements for appliances for heating liquids
  • GB 4706.19-2004 Safety of household and similar electrical appliances-Particular requirements for appliances of heating liquids
  • GB 4706.19-2008 Household and similar electric appliances.Safety.Particular requirements for heating liquids

European Committee for Electrotechnical Standardization（CENELEC）, liquid insulation

  • EN 61100:1992 Classification of Insulating Liquids According to Fire Point and Net Calorific Value

Professional Standard - Aerospace, liquid insulation

  • QJ 2969-1997 General specification for liquid rocket engine heat exchangers

轻工业部, liquid insulation

  • QB 1692.3-1993 Household hygienic insecticide supplies electric heating liquid mosquito coils

American Petroleum Institute (API), liquid insulation

Lithuanian Standards Office , liquid insulation

  • LST EN ISO 9920:2009 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007, Corrected version 2008-11-01)
  • LST EN 1094-4-2001 Insulating refractory products - Part 4: Determination of bulk density and true porosity
  • LST EN 61100-2001 Classification of insulating liquids according to fire point and net calorific value (IEC 61100:1992)
  • LST ISO 1817:2012 Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids (ISO 1817:2011, identical)

International Electrotechnical Commission (IEC), liquid insulation

  • IEC 61100:1992 Classification of insulating liquids according to fire-point and net caloring value
  • IEC 112/143/CD:2010 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements
  • IEC TS 62332-2:2014 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test

Professional Standard - Energy, liquid insulation

  • NB/SH/T 0930-2016 Determination method of gas production characteristics of insulating liquid under thermal stress
  • NB/SH/T 0567-2016 Determination of flammability of liquids in contact with hot surfaces - Manifold ignition method

国家能源局, liquid insulation

  • SH/T 0930-2016 Method for determination of gas generation characteristics of insulating liquids under thermal stress
  • SH/T 0567-2016 Determination of flammability of liquids in contact with hot surfaces - Manifold ignition method

PL-PKN, liquid insulation

  • PN B13047-1992 Glass hydrometers. Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liguids)
  • PN C04062-1986 Petroleum products Determination of gross heat of combustion by bomb calorimeter and calculation of net heat of combustion, of li?uid fuels
  • PN L01461-1992 Aerospace fluid systems. Thermal shock testing of piping and fittings
  • PN E08223-01-1988 Safety óf household and similar electrical appliances Part 2: Particular requirements for appliances tor heating liouids

US-AAMI, liquid insulation

  • ANSI/AAMI PB70-2012 Liquid barrier performance and classification of protective apparel and drapes intended for use in health care facilities

National Fire Protection Association (NFPA), liquid insulation

  • NFPA 395H PART 3-1996 Standard and Commentary for NFPA 395, Storage of Flammable and Combustible Liquids on Farms and Isolated Sites
  • NFPA 395-1993 Standard for the Storage of Flammable and Combustible Liquids at Farms and Isolated Sites Effective Date: 8/20/1993

YU-JUS, liquid insulation

  • JUS IEC 1100:1994 Classification of insulating liquids according to fire-point and net calorific value
  • JUS G.C6.500-1981 Termoplastic pipes for transport of fluids. Nominal outside diameter, pressure and tolerances
  • JUS N.M1.050-1989 Safety reguirements. Liguid heating appliances. Particular technical conditions and tests
  • JUS G.C6.500/1-1991 Plastics.Termoplastic pipes for transport of fluids.Nominal outside diameter,pressure and tolarances. Amendments

Japanese Industrial Standards Committee (JISC), liquid insulation

  • JIS K 6258:2003 Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids
  • JIS K 6258:2016 Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids

Henan Provincial Standard of the People's Republic of China, liquid insulation

  • DB41/T 1887-2019 Specification for supervision and inspection of installation of organic heat carrier liquid phase furnace

Taiwan Provincial Standard of the People's Republic of China, liquid insulation

  • CNS 15165-1-2008 Test methods for solar collectors - Part 1 : Thermal performance of glazed liquid heating collectors including pressure drop
  • CNS 6359-1980 Method of Test for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Caloriment
  • CNS 15165-3-2008 Test methods for solar collectors - Part 3 : Thermal performance of unglazed liquid heating collectors (sensible heat transfer only) including pressure drop

Professional Standard - Commodity Inspection, liquid insulation

  • SN/T 1372-2004 Rules for the inspection of safety requirements for appliances of heating liquids for import and export

Jilin Provincial Standard of the People's Republic of China, liquid insulation

  • DB22/T 2873-2018 Inspection methods for vacuum insulated cryogenic liquid tank containers

PT-IPQ, liquid insulation

  • NP EN 1397-2000 Heat exchangers Hydronic room fan coil units Test procedures for establishing the performance
  • NP 253-1985 Matériaux plastiques. Tubes en matlères thermoplastiques pour le transport des fluides. Diamètres extérieurs nominaux et pressions nomlnales
  • NP 3248-1-1987
  • NP 3248-4-1987

BR-ABNT, liquid insulation

  • ABNT NBR 10185-2013 Thermal storage tank for liquids intended for solar energy systems - Determination of thermal performance - Test method

Defense Logistics Agency, liquid insulation

  • DLA MIL-DTL-28827 B-2004 SWITCHES THERMOSTATIC, (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
  • DLA DSCC-DWG-04038 REV A-2007 WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260癈, 600 VOLT

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, liquid insulation

  • GB/T 22578.1-2017 Electrical insulation systems (EIS)—Thermal evaluaion of combined liquid and solid components—Part 1: General requiremnts
  • GB/T 22578.2-2017 Electrical insulation system(EIS)—Thermal evaluation of combined liquid and solid components—Part 2: Simplified test

Underwriters Laboratories (UL), liquid insulation

  • UL 307A-1995 Liquid fuel-burning heating appliances for manufactured homes and recreational vehicles

GB-REG, liquid insulation

Natural Gas Processor's Association (NGPA), liquid insulation

  • GPA RR-130-1995 Thermodynamically Consistent Model for the Prediction of Solubilities and Enthalpies of Solution of Acid Gases in Aqueous Alkanolamine Solutions

Professional Standard - Geology, liquid insulation

  • DZ/T 0184.5-1997 Rubidium and Strontium Isotope Geological Age Determination of Quartz Single Mineral and Its Hydrothermal Fluid Inclusions

EU/EC - European Union/Commission Legislative Documents, liquid insulation

  • 92/42/EEC CORR-2009 Council Directive on Efficiency Requirements for New Hot-Water Boilers Fired with Liquid or Gaseous Fuels

VN-TCVN, liquid insulation

  • TCVN 7093-1-2003 Thermoplastics pipes for the conveyance of fluids.Dimensions and tolerances.Part 1: Metric series
  • TCVN 7093-2-2003 Thermoplastics pipes for the conveyance of fluids.Dimensions and tolerances.Part 2: Inch series

CEN - European Committee for Standardization, liquid insulation

  • EN 14511-3:2018 Air conditioners@ liquid chilling packages and heat pumps for space heating and cooling and process chillers@ with electrically driven compressors - Part 3: Test methods
  • EN 14511-3:2004 Air conditioners@ liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods

  Insulation, Insulation specifications, Insulation specifications, Insulation materials, Heat insulation device, Insulation, insulation products, liquid insulation, Insulation paint, insulation gloves, Thermal insulation ceramics, Thermal insulation performance, ceramic insulation, Thermal insulation ceramics, insulation blanket, insulation gloves, Thermal insulation test, Insulation equipment, Insulation equipment, insulation cloth.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved