ZH
RU
ES
Density Cup Calibration Procedure
Density Cup Calibration Procedure, Total:57 items.
In the international standard classification, Density Cup Calibration Procedure involves: Terminology (principles and coordination), Electrical accessories, Optics and optical measurements, Geology. Meteorology. Hydrology, Earthworks. Excavations. Foundation construction. Underground works, Construction materials, Measurement of volume, mass, density, viscosity, Thermodynamics and temperature measurements, On-board equipment and instruments, Test conditions and procedures in general, Pumps, Measurement of time, velocity, acceleration, angular velocity, Protection against fire, Electrical wires and cables, Pipeline components and pipelines.
Group Standards of the People's Republic of China, Density Cup Calibration Procedure
- T/SMA 0010-2020 SF6 Gas Density Relay Field Calibration Regulations
- T/CEC 410-2020 Technical Specifications for SF6/N2 Mixed Gas Density Relay Calibration Device
Professional Standard - Electricity, Density Cup Calibration Procedure
American Society for Testing and Materials (ASTM), Density Cup Calibration Procedure
- ASTM E1079-05 Standard Practice for Calibration of Transmission Densitometers
- ASTM E1079-10 Standard Practice for Calibration of Transmission Densitometers
- ASTM E1079-00 Standard Practice for Calibration of Transmission Densitometers
- ASTM E1079-21 Standard Practice for Calibration of Transmission Densitometers
- ASTM E1079-16 Standard Practice for Calibration of Transmission Densitometers
- ASTM D7961-22 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
- ASTM E2847-13 Standard Practice for ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
- ASTM E2847-11 Standard Practice for 65279; 65279;Calibration and Accuracy Verification of Wideband Infrared Thermometers
- ASTM E177-04 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
- ASTM E177-06 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
- ASTM E177-04e1 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
- ASTM E691-09e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM E180-93 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals
- ASTM C670-03 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
- ASTM C670-10 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
- ASTM C670-13 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
- ASTM C670-15 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
Professional Standard - Water Conservancy, Density Cup Calibration Procedure
National Metrological Verification Regulations of the People's Republic of China, Density Cup Calibration Procedure
- JJG(铁道) 152-1995 Verification Regulation of Speedmeter Calibration Equipment for Locomotives
- JJG(机械) 20-1990 Verification Regulations for Calibration Device of WJM-1 Surface Thermometer
- JJG(轻工) 83-1991 Verification Regulations for BMP-2 Quartz Clock Instrument Accuracy Calibrator
- JJG 1058-2010 Verification Regulation of Laboratory Oscillation-type Liquid Density meters
British Standards Institution (BSI), Density Cup Calibration Procedure
- BS ISO 24070-2:2021 Building and civil engineering sealants. Determination of cured thickness of one-component sealant - Cylindrical cup test method
- 20/30396501 DC BS ISO 24070-2. Buildings and civil engineering works. Determination of cured thickness of one-component sealants. Part 2. Cylindrical cup test method
- BS EN 61034-2:2005+A1:2013 Measurement of smoke density of cables burning under defined conditions. Test procedure and requirements
- BS EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions - Test procedure and requirements
Military Standard of the People's Republic of China-General Armament Department, Density Cup Calibration Procedure
- GJB 6756-2009 Test rules for low density wind tunnel
- GJB 837.4-1990 Layer-laying rocket finalization test procedures ground range and intensity tests
American Society of Mechanical Engineers (ASME), Density Cup Calibration Procedure
Shanxi Provincial Standard of the People's Republic of China, Density Cup Calibration Procedure
- DB14/T 2134-2020 Operating Procedures for Elevator Speed Governor Action Speed Calibration
International Organization for Standardization (ISO), Density Cup Calibration Procedure
- ISO 24070-2:2021 Building and civil engineering sealants - Determination of cured thickness of one-component sealant - Part 2: Cylindrical cup test method
Standard Association of Australia （SAA）, Density Cup Calibration Procedure
- AS 4133.2.1.1:2005 Methods of testing rocks for engineering purposes - Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and calliper techniques
- AS 4133.2.1.2:2005 Methods of testing rocks for engineering purposes - Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and buoyancy techniques
Institute of Electrical and Electronics Engineers (IEEE), Density Cup Calibration Procedure
- IEEE 836-2001 Recommended practice for precision centrifuge testing of linear accelerometers
- IEEE 836-2009 Recommended practice for precision centrifuge testing of linear accelerometers
Professional Standard - Geology, Density Cup Calibration Procedure
- DZ/T 0276.4-2015 Regulation for testing the physical and mechanical properties of rock.Part 4:Test for determining the density of rock
- DZ/T 0276.3-2015 Regulation for testing the physical and mechanical properties of rock.Part 3:Test for determining the grain density of rock
Korean Agency for Technology and Standards (KATS), Density Cup Calibration Procedure
- KS B ISO 5198:2003 Centrifugal, mixed flow and axial pumps-Code for hydraulic performance tests-Precision class
American National Standards Institute （ANSI), Density Cup Calibration Procedure
- ANSI/ASTM E177:2013 PRACTICE FOR USE OF THE TERMS PRECISION AND BIAS IN ASTM TEST METHODS
- ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD
- ANSI/IEEE 836:2009 Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers
- ANSI/ASTM F2487:2013 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
U.S. Military Regulations and Norms, Density Cup Calibration Procedure
- ARMY MIL-STD-191 A-1956 METHOD AND PROCEDURE FOR OVERALL CALIBRATION OF ILLUMINOMETER FOR USE IN ACCEPTANCE TESTING OF PYROTECHNIC ILLUMINANTS
Indonesia Standards, Density Cup Calibration Procedure
- SNI 03-6813-2002 Procedure for making test cylinders and prisms for determining strength and density of preplaced-agregate concrete in laboratory
International Electrotechnical Commission (IEC), Density Cup Calibration Procedure
- IEC 61034-2:2019 Measurement of smoke density of cables burning under defined
conditions - Part 2: Test procedure and requirements
- IEC 61034-2:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined
conditions - Part 2: Test procedure and requirements
未注明发布机构, Density Cup Calibration Procedure
- BS 7622-2:1993(1999) Measurement ofsmoke density ofelectric cables burning under defined conditions — Part 2 : Test procedure and requirements