ZH
RU
ES

Table test parameter table

Table test parameter table, Total:497 items.

In the international standard classification, Table test parameter table involves: Machine tools, Optics and optical measurements, Electricity. Magnetism. Electrical and magnetic measurements, Metrology and measurement in general, Pharmaceutics, Linear and angular measurements, Testing of metals, Gears, Farming and forestry, Protection against fire, Industrial automation systems, Measurement of fluid flow, Vocabularies, Characteristics and design of machines, apparatus, equipment, Technical drawings, Road vehicle systems, Footwear, Adhesives, Astronomy. Geodesy. Geography, Mechanical testing, Radiation measurements, Wood technology processes, Construction materials, Valves, Power transmission and distribution networks, Environmental testing, Chipless working equipment, Piezoelectric and dielectric devices, Equipment for petroleum and natural gas industries, Horology, Quality, Electrical and electronic testing, Springs, Rectifiers. Convertors. Stabilized power supply, Applications of information technology, Measurement of volume, mass, density, viscosity, Semiconductor devices, Analytical chemistry, Telecommunication systems, Components for electrical equipment, Wood-based panels, Measurement of time, velocity, acceleration, angular velocity, Test conditions and procedures in general, Road engineering, Rubber, Wood, sawlogs and sawn timber, Character symbols, Cereals, pulses and derived products, Surface treatment and coating, Products of the textile industry, Terminology (principles and coordination), Measurement of force, weight and pressure, Installations in buildings, Galvanic cells and batteries, Aids for disabled or handicapped persons, Non-textile floor coverings, Burners. Boilers, Thermodynamics and temperature measurements, Cutting tools, Paper and board, Acoustics and acoustic measurements, Meat, meat products and other animal produce, Fruits. Vegetables, Beverages, Diagnostic, maintenance and test equipment, Equipment for processing of minerals, Electronic components in general, Pulps, Welding, brazing and soldering, Solar energy engineering, Graphic technology, Nuclear energy engineering, Earthworks. Excavations. Foundation construction. Underground works, Sports equipment and facilities, Jewellery, Electromagnetic compatibility (EMC), Construction of airports, Document imaging applications, Rotating machinery, Pipeline components and pipelines, Internal combustion engines for road vehicles, Audio, video and audiovisual engineering, Ferrous metals, Products of the chemical industry, Medical equipment, Plastics, Electronic display devices, Road vehicles in general, Protection of and in buildings, Earth-moving machinery, Gas and steam turbines. Steam engines, Electronic component assemblies, Leather technology.

Professional Standard - Machinery, Table test parameter table

JB/T 4136.1-1999 Meter lathe parameters
JB/T 10564-2006 Basic parameters for flow measuring instruments
JB/T 9341.2-1999 Metrology grating technology.Test method of digital display meter
JB/T 12392-2015 Representation of technological parameter for mechanical machining
JB/T 8078-1999 Grinders for internal surface of outer ring of bearings parameters
JB/T 8079-1999 Grinder for outer surface of inner rings of bearings parameters
JB/T 8080-1999 Grinders for internal surface of inner ring of bearings parameters
JB/T 8079.1-1999 Bearing inner ring outer surface grinding machine parameters
JB/T 6214-1992 Guideline for reliability validation test and determination test (exponential distribution) for instrumentation
JB/T 6214-2014 Guideline for reliability validation test and determination test (exponential distribution) for instrumentation
JB/T 11575.1-2013 Handarbour instrumental lathe.Part 1: Styles and parameters

PL-PKN, Table test parameter table

PN M04251-1987 Geometrie surface structure Surface roughness Numerical values of parameters
PN M04255-1974 Geometrical structure o? surface Surface waviness Basic definilions and parameters
PN G03352-1972 Driliing geophysies Ends of heads ins?ruments intratelluric Principal parame?ers
PN C04802-1966 Surface ac?ive agents Hard water resis?ance test
PN E04160 ArkusZ81-1973 Electric cables Methods of ?esting Wave parame?ers test

RU-GOST R, Table test parameter table

GOST 9847-1979 Optical instruments for surface roughness parameters measuring. Basis parameters and types
GOST 2789-1973 Surface roughness. Parameters and characteristics
GOST 3295-1973 Hypsometric tables for geopotential altitudes up 50000 m. Characteristics
GOST 22223-1976 Shut-off device for pressur gauges. Main technical data
GOST 21293-1975 Surface finish heated core boxes. Parameters
GOST 15172-1970 Transistors. List of basic and reference electrical parameters
GOST R 50778-1995 Loss meters of cable line. Types and basic parameters
GOST R ISO 4287-2014 Geometrical product specifications (GPS). Surface texture. Profile method. Terms, definitions and surface texture parameters
GOST 7016-1982 Products of wood and wooden materials. Parameters of surface roughness
GOST 24773-1981 Surfaces with regular microshape. Classification, parameters and characteristics
GOST R 25645.161-1994 The surfaces of Moon, Mars and Venus. The radiophysical parameters
GOST 25450-1982 Surface regenerative heaters. Types, basic parameters and dimensions
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 30260-1996 Equipment for arc deposition surfaces of rotative bodies. Types, basic parameters and dimensions
GOST 9244-1975 Inside callipers graduated in 0,001 and 0,002 mm. Specifications
GOST R ISO 25178-2-2014 Geometrical product specifications (GPS). Surface texture. Profile method. Part 2. Terms, definitions and surface texture parameter
GOST 21980-1976 Gas centrifugal burners with tangential iniet basic indexes nomenclature and methods of computation
GOST 28276-1989 Surface acoustic wave devices. Types, main parameters and methods of measurements
GOST 13678-1973 Cylindrical small module gear. Pairs with watch profile. Types, basic parameters and dimensions, tolerances
GOST R 8.904-2015 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2. Verification and calibration of testing machines
GOST R 58009-2017 Leather. Leather for automotive. Test methods and testing parameters

Professional Standard - Electron, Table test parameter table

SJ/T 11103-1996 Tables for life testing - Tables for (1+1/m)
SJ/T 11099-1996 Tables for life testing - Tables for best linear unbiased estimate (Value distribution and Weibull distribution)
SJ/T 11102-1996 Tables for life testing - Tables for simple linear unbiased estimate (Normal distribution and log normal distribution)
SJ/T 11101-1996 Tables for life testing - Tables for best linear unbiased estimate (Normal distribution and log normal distribution)
SJ 2315-1983 Methods of measurement for d.c. digital voltmeters
SJ 2944-1988 Test method for ac digital voltmeter

American Welding Society (AWS), Table test parameter table

AWS FGW APP D-1979 Tables D1 and D2 (Laboratory Data Sheets for Part IV)
AWS FGW APP E-1979 Tables E1 to E6 (Laboratory Data Sheets for Part V)

电子工业部, Table test parameter table

SJ/T 10345.5-1993 Life test table r(1+1/m) numerical table
SJ/T 10345.1-1993 Life test table is the best linear unbiased estimation table (extreme value distribution)
SJ/T 10345.3-1993 Life test table is the best linear unbiased estimation table (normal distribution)
SJ/T 10345.4-1993 Table for life test Simple linear unbiased estimation table (normal distribution)
SJ/T 10345.2-1993 Table for life test Simple linear unbiased estimation table (extreme value distribution)

HU-MSZT, Table test parameter table

SE-SIS, Table test parameter table

SIS SS-ISO 4287/1:1988 Surface roughness - Terminology - Part 1: Surface and its parameters
SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
SIS SS-ISO 468:1988 Surface roughness - Parameters, their values and general rules for specifying requirements
SIS SS IEC 650:1981 Nuclear instrumentation - Analogue counting ratemeters - Characteristics and test methods
SIS SS IEC 739:1986 Nuclear instrumentation - Digital counting ratemeters - Characteristics and test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Table test parameter table

GB/T 13970-1992 Basic parameter series of digital instruments
GB/T 13970-2008 Basic parameter terms of digital instruments
GB/T 13970-2008 Basic parameter terms of digital instruments
GB/T 1031-1995 Surface ronghness parameters and their values
GB/T 1314-1991 Basic parameters for flow measuring instruments
GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters
GB/T 12472-1990 Surface roughness--Parameters and their values for wooden pieces
GB/T 12767-1991 Powder metallurgy products--Surface roughness--Parameters and their values
GB/T 1031-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Surface roughness parameters and their values
GB/T 25187-2010 Surface chemical analysis.Auger electron spectroscopy.Description of selected instrumental performance parameters
GB/T 28892-2012 Surface chemical analysis.X-ray photoelectron spectroscopy.Description of seleted instrumental performance parameters
GB/T 12472-2003 Geometrical product specifications(GPS)--Surface texture:Profile method Surface roughness Parameters and their values for wooden pieces
GB/T 3505-2000 Geometrical Product Specifications (GPS)-Surface texture:Profile method-Terms,definitions and surface texture parameters
GB/T 3505-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Terms,definitions and surface texture parameters
GB/T 7220-2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method Surface roughness-Terminology-Measurement of surface roughness Parameters
GB/T 8051-2002 Sequential sampling procedures and tables for inspection by attributes
GB/T 778.2-2018 Meters for cold potable water and hot water.Part 2:Test methods
GB/T 22264.8-2022 Mounted digital display electric measuring instruments—Part 8：Test methods
GB/T 18618-2009 Geometrical Product Specification(GPS)-Surface texture:Profile method-Motif parameters
GB/T 1636-1979 Test method for apparent density of moulding plastic materials
GB/T 11206-2009 Standard test method for rubber deterioration.Surface cracking
GB/T 4861-2008 Analogue counting ratemeters.Characteristics and test methods
GB/T 4861-1984 Analogue counting ratemeters characteristics and test methods

Professional Standard - Medicine, Table test parameter table

YY/T 0507-2009 Medical elastic bandage Characteristics and test methods for basic performance

YU-JUS, Table test parameter table

JUS M.A1.010-1983 Surface roughness. Terminology. Surface and its parameters
JUS M.A1.032-1980 Classification of imtruments and devices for measurement and evaluation of the geometrical parameters of surface finish
JUS C.A4.032-1986 Tables of Brinell hardness values for use In tests made on flat surfaces

RO-ASRO, Table test parameter table

STAS 5730/2-1985 Surface conditions SURFACE ROUGHNESS PARA- METERS AND SPECIFICATIONS
STAS 9244-1990 Surface grinding machines. Main parameters
STAS 4200-1969
STAS 9215-1979 BURNHRS .FOR MIXTJNG FURNACES. List of parameters indicated in technical regulating documents
STAS 10350-1983 DIGITAL INTEGRATED CIRCUITS Terminology and classified list of main parameters
STAS SR ISO 7176-13:1995 Wheelchairs. Part 13: Determination of coefficient of friction of test surfaces
STAS 9244-1980 SURFACE GRINDING WITH HORIZONTAL OR VERTICAL SPINDLE Basic parameters

International Organization for Standardization (ISO), Table test parameter table

ISO 410:1982 Metallic materials; Hardness test; Tables of Brinell hardness values for use in tests made on flat surfaces
ISO 4287-1:1984 Surface roughness; Terminology; Part 1 : Surface and its parameters Trilingual edition
ISO 19744:2020 Test conditions for numerically controlled broaching machines — Testing of accuracy — Vertical surface type broaching machines
ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
ISO 701:1976 International gear notation; Symbols for geometrical data
ISO 11746:2012 Rice - Determination of biometric characteristics of kernels
ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition
ISO/TS 10303-1813:2014 Industrial automation systems and integration - Product data representation and exchange - Part 1813: Application module: Parametric representation
ISO/TS 10303-1813:2018 Industrial automation systems and integration — Product data representation and exchange — Part 1813: Application module: Parametric representation
ISO/TR 10220:1989 Batteries for watches; leakage tests
ISO 7176-13:1989 Wheelchairs; part 13: determination of coefficient of friction of test surfaces
ISO/TS 13399-3:2007/Cor 1:2011 Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items; Technical Corrigendum 1
ISO/TS 13399-4:2007/Cor 1:2011 Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items; Technical Corrigendum 1
ISO/TS 13399-5:2007/Cor 1:2011 Cutting tool data representation and exchange - Part 5: Reference dictionary for assembly items; Technical Corrigendum 1
ISO 6481:2019 Test conditions for vertical surface type broaching machines — Testing of accuracy
ISO/TS 10303-1790:2014 Industrial automation systems and integration - Product data representation and exchange - Part 1790: Application module: Parameterization and variational representation
ISO/TS 10303-1790:2019 Industrial automation systems and integration — Product data representation and exchange — Part 1790: Application module: Parameterization and variational representation
ISO/TS 10303-1790:2018 Industrial automation systems and integration — Product data representation and exchange — Part 1790: Application module: Parameterization and variational representation
ISO/TS 13399-60:2007/Cor 1:2011 Cutting tool data representation and exchange - Part 60: Reference dictionary for connection systems; Technical Corrigendum 1
ISO 21920-2:2021 Geometrical product specifications (GPS) — Surface texture: Profile — Part 2: Terms, definitions and surface texture parameters
ISO 25178-2:2021 Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
ISO/TS 10303-1355:2006 Industrial automation systems and integration - Product data representation and exchange - Part 1355: Application module: Parameterized catalog data and shape representation
ISO 4287:1997/Amd 1:2009 Geometrical Product Specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters; Amendment 1: Peak count number
ISO 409-1:1982 Metallic materials; Hardness test; Tables of Vickers hardness values for use in tests made on flat surfaces; Part 1 : HV 5 to HV 100
ISO/TS 13399-2:2005/Cor 1:2011 Cutting tool data representation and exchange - Part 2: Reference dictionary for the cutting items; Technical Corrigendum 1
ISO 11746:2012/Amd 1:2017 Rice - Determination of biometric characteristics of kernels; Amendment 1

CZ-CSN, Table test parameter table

CSN 01 4450-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4451-1980 Surface roughness. Basic pnrameters, numerical values
CSN 25 7859 ZZ1-2000
CSN 08 1161-1990 Heaters, surface, regenerative. Types. Fundamental parameters
CSN 47 8611-1987 Milking machine installations. Milk meters. Types, parameters and technical requirements
CSN 25 2300-1972 Classification of instruments and devices or measurement of the geometrical arameters of surface finish

British Standards Institution (BSI), Table test parameter table

BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
PD CLC/TS 50654-2:2020 HVDC Grid Systems and connected Converter Stations. Guideline and Parameter Lists for Functional Specifications. Parameter Lists
BS EN 14390:2007 Fire test - Large-scale room reference test for surface products
BS ISO 16844-7:2015 Road vehicles. Tachograph systems. Parameters
BS PD CEN/TR 15990:2010 Data Sheets — Footwear Tests Materials and Test Adhesives
BS PD CEN/TR 15990:2021 Data sheets. Footwear tests materials and test adhesives
BS EN ISO 14577-2:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
PD IEC/TS 63291-2:2023 High voltage direct current (HVDC) grid systems and connected converter stations. Guideline and parameter lists for functional specifications. Parameter lists
BS EN 60444-8:2003 Measurement of quartz crystal unit parameters - Test fixture for surface mounted quartz crystal units
BS EN 60444-8:2017 Measurement of quartz crystal unit parameters. Test fixture for surface mounted quartz crystal units
BS EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Tables of hardness values
BS EN ISO 25178-2:2012 Geometrical product specifications (GPS). Surface texture. Areal. Terms, definitions and surface texture parameters
BS EN ISO 21920-2:2022 Geometrical product specifications (GPS). Surface texture: Profile - Terms, definitions and surface texture parameters
BS EN ISO 4287:1998 Geometrical product specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
BS EN ISO 4287+A1:2000 Geometrical product specification (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
BS EN ISO 4287:1998+A1:2009 Geometrical product specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
BS 903-C1:1991 Physical testing of rubber - Determination of surface resistivity
BS ISO 701:1998 International gear notation - Symbols for geometrical data
BS ISO 701:1999 International gear notation. Symbols for geometrical dat
BS EN ISO 11746:2012 Rice. Determination of biometric characteristics of kernels
BS 6336:1998 Guide to the development of fire tests, the presentation of test data and the role of tests in hazard assessment
BS EN ISO 25178-2:2022 Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal. Terms, definitions and surface texture parameters
BS EN 14176:2003 Foodstuffs - Determination of domoic acid in mussels by HPLC
BS EN 14177:2003 Foodstuffs - Determination of patulin in clear and cloudy apple juice and cloudy apple juice and puree - HPLC method with liquid/liquid partition clean-up
BS EN 14154-3:2005 Water meters — Part 3 : Test methods and equipment
BS EN 14154-3:2005+A2:2011 Water meters. Test methods and equipment
BS 999:1962 Schedule of tests for coke ovens
BS EN 1434-5:2015+A1:2019 Thermal energy meters. Initial verification tests
BS EN ISO 8785:1999 Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters
BS DD CEN/TS 635-4:2007 Plywood - Classification by surface appearance - Parameters of ability for finishing, guideline
PD ISO/TS 13399-3:2021 Cutting tool data representation and exchange. Reference dictionary for tool items
BS 903-3:2003 Physical testing of rubber - Acquisition and presentation of comparable single-point data
BS 903-4:2003 Physical testing of rubber - Acquisition and presentation of comparable multi-point data
BS PD ISO/TS 13399-2:2014 Cutting tool data representation and exchange. Reference dictionary for the cutting items
BS PD ISO/TS 13399-5:2014 Cutting tool data representation and exchange. Reference dictionary for assembly items
BS PD ISO/TS 13399-3:2014 Cutting tool data representation and exchange. Reference dictionary for tool items
BS EN ISO 12085:1997 Geometrical product specification (GPS) - Surface texture - Profile method - Motif parameters
DD CEN/TS 635-4:2007 Plywood. Classification by surface appearance - Parameters of ability for finishing, guideline
PD ISO/TS 13399-5:2014 Cutting tool data representation and exchange. Reference dictionary for assembly items
PD ISO/TS 13399-2:2021 Tracked Changes. Cutting tool data representation and exchange. Reference dictionary for the cutting items
PD ISO/TS 13399-60:2014 Cutting tool data representation and exchange. Reference dictionary for connection systems
PD ISO/TS 13399-50:2013 Cutting tool data representation and exchange. Reference dictionary for reference systems and common concepts
13/30272930 DC BS EN ISO 4287 AMD2. Geometrical Product Specifications (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
BS EN 13036-4:2011 Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface. The pendulum test
BS EN 13036-4:2011(2013) Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface. The pendulum test
BS EN 13036-5:2019 Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface. The pendulum test
PD ISO/TR 16476:2016 Reference materials. Establishing and expressing metrological traceability of quantity values assigned to reference materials
BS PD ISO/TS 13399-4:2014 Cutting tool data representation and exchange. Reference dictionary for adaptive items
BS PD ISO/TS 13399-60:2014 Cutting tool data representation and exchange. Reference dictionary for connection systems
BS ISO/TS 13399-2:2005 Cutting tool data representation and exchange - Reference dictionary for the cutting items
PD ISO/TS 13399-4:2021 Tracked Changes. Cutting tool data representation and exchange. Reference dictionary for adaptive items
BS 8493:2008 Light reflectance value (LRV) of a surface - Method of test
BS 8493:2008+A1:2010 Light reflectance value (LRV) of a surface - Method of test
BS EN 12274-7:2005 Slurry surfacing - Test methods - Shaking abrasion test
BS EN 12274-7:2005(2006) Slurry surfacing - Test methods - Shaking abrasion test
BS EN 62137-1-3:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Cyclic drop test
BS EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Cyclic bending test

German Institute for Standardization, Table test parameter table

DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN EN 14390:2007 Fire test - Large-scale room reference test for surface products; English version of DIN EN 14390:2007-04
DIN 4000-1:1992 Object parameter list; concepts and principles
DIN 8242-3:1987-09 Dials for watches; acceptance test
DIN 4000-85:1995 Object parameter list - Part 85: For threads
DIN CLC/TS 50654-2:2018 HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2: Parameter Lists; German and English version CLC/FprTS 50654-2:2017
DIN 4000-125:1999 Object parameter lists - Part 125: Elastomer mounts
DIN 41746-1:1972 Stabilized power supplies with d.c. output; recommendations for data sheets
DIN 879-1:1999-06 Verification of geometrical parameters - Dial indicator for linear mesurement - Part 1: With mechanical indication
DIN 8301:1987-09 Cases for clocks; acceptance test
DIN 8301:1987 Cases for clocks; acceptance test
DIN 4000-125:1999-08 Object parameter lists - Part 125: Elastomer mounts
DIN 53861-3:1970 Testing of textiles; vaulting test and bursting test, tabels for the evaluation of tests
DIN EN 14390:2007-04 Fire test - Large-scale room reference test for surface products; German version EN 14390:2007
DIN 16003:2018 Mechanical pressure and temperature gauges - Differential pressure gauges - Dimensions, metrology, requirements and testing
DIN 66142-3:1982-09 Representing and characterizing the separation of disperse materials; Selection and determination of parameters for industrial separation processes
DIN 4575:2020 Graphite test for furniture surfaces
DIN 8242-3:1987 Dials for watches; acceptance test
DIN CLC/TS 50654-2:2021 HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2: Parameter Lists; German version CLC/TS 50654-2:2020
DIN 38409-59:2022-10 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 59: Determination of adsorbable organically bound fluorine, chlorine, bromine and iodine (AOF, AOCl, AOBr, ...
DIN EN ISO 25178-2:2012-09 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012); German version EN ISO 25178-2:2012 / Note: To be replaced by DIN EN ISO 25178-2 (2020-02).
DIN EN ISO 21920-2:2022-12 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06); German version EN ISO 21920-2:2022
DIN 54378:2021 Testing of paper and board - Determination of the surface colony count (OKZs)
DIN 54378:1993 Testing of paper and board; determination of the surface colony count OKZs
DIN EN ISO 8785:1999 Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998); German version EN ISO 8785:1999
DIN EN ISO 12085 Berichtigung 1:2009-09 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997, Corrigendum to DIN EN ISO 12085:1998-05; German version EN ISO 12085:1997/AC:2008
DIN EN ISO 8785:1999-10 Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998); German version EN ISO 8785:1999
DIN CEN/TR 15990:2011 Data Sheets - Footwear Tests Materials and Test Adhesives; German version CEN/TR 15990:2010 + AC:2010
DIN EN ISO 12085:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997
DIN EN ISO 3382-1:2009-10 Acoustics - Measurement of room acoustic parameters - Part 1: Performance spaces (ISO 3382-1:2009); German version EN ISO 3382-1:2009
DIN 19051-4 Bb.2:2013 Test charts for micrography.Part 4: Test chart B for optical density and for determination of scale of reproduction; Supplement 2: Test sheet (size A4) for practical use
DIN CEN/TR 15990:2022-01 Data sheets - Footwear tests materials and test adhesives; German version CEN/TR 15990:2021
DIN 43751-3:1987 Measurement and control; digital measuring instruments; instruments for measuring digital quantities; definitions, tests and data sheet details

American National Standards Institute （ANSI), Table test parameter table

ANSI/ASAE EP411.5-2012 Guidelines for Measuring and Reporting Environmental Parameters for Plant Experiments in Growth Chambers
ANSI/EIA 638:1995 Surface Mount Solderability Test
ANSI/TAPPI T459 om-2013 Surface strength of paper (wax pick test)

European Committee for Standardization (CEN), Table test parameter table

EN 14390:2007 Fire test - Large-scale room reference test for surface products
EN ISO 25178-2:2022 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
PD CEN/TS 635-4:2007 Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline
EN ISO 11746:2022 Rice - Determination of biometric characteristics of kernels (ISO 11746:2020)
EN ISO 11746:2012 Rice - Determination of biometric characteristics of kernels (Incorporates Amendment A1: 2017)
EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
EN ISO 21920-2:2022 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
EN 1434-5:2015 Heat meters - Part 5: Initial verification tests
PD CEN/TR 15990:2021 Data sheets - Footwear tests materials and test adhesives
prEN 256-1990 Test methods and equipment for cold water meters
EN 14906:2012 Leather - Leather for automotive - Test methods and testing parameters

Association Francaise de Normalisation, Table test parameter table

NF P92-528*NF EN 14390:2007 Fire-test - Large-scale room reference test for surface products
NF E60-139*NF ISO 19744:2022 Test conditions for numerically controlled broaching machines - Testing of the accuracy - Vertical surface type broaching machines
NF S81-515:1990 Horology. Method of testing water-resistant watches.
NF T76-300:1983 Adhesives. List of characterization test methods.
NF S86-605:1990 Horlogerie - Cahier des charges pour l'épreuve d'étanchéité à l'eau des boîtes de montres
NF EN ISO 25178-2:2022 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 2 : termes, définitions et paramètres d'états de surface
NF EN ISO 14881:2021 Optique intégrée - Interfaces - Paramètres caractérisant les propriétés de couplage
NF C93-805-2-3*NF EN 61290-2-3:1998 Optical fibre amplifiers. Basic specification. Part 2-3 : test methods for optical power parameters. Optical power meter.
NF S86-400:1994 Horlogery. Watch-glasses. Dimensions and tolerances of watch-glasses and test methods for their verification.
NF EN 12896-3:2017 Transports publics - Modèle de données de référence - Partie 3 : informations horaires et horaires des véhicules
NF V03-755*NF EN ISO 11746:2012 Rice - Determination of biometric characteristics of kernels
NF S90-615*NF ISO 7176-13:1990 Wheelchairs. Part 13 : determination of coefficient of friction of test surfaces.
NF S86-606:2004 Horology - Test methods for leather and non-metallic bracelets for watches.
NF C93-621-8:2005 Measurement of quartz crystal unit parameters - Part 8 : test fixture for surface mounted quartz crystal units.
NF E05-015/A1:2009 Geometrical Product Specifications (GPS) - Surface texture : profile method - Terms, definitions and surface texture parameters - Amendment 1 : peak count number.
NF E05-031-2*NF EN ISO 25178-2:2022 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2 : terms, definitions and surface texture parameters
NF E05-016-2*NF EN ISO 21920-2:2022 Geometrical product specifications (GPS) - Surface texture : profile - Part 2 : terms, definitions and surface texture parameters
NF EN ISO 8785:1999 Spécification géométrique des produits (GPS) - Imperfections de surface - Termes, définitions et paramètres
NF EN ISO 3382-1:2010 Acoustique - Mesurage des paramètres acoustiques des salles - Partie 1 : salles de spectacles
NF EN 14390:2007 Essais au feu - Essai de référence dans une pièce à grande échelle pour les produits de surface
NF EN 62333-3:2012 Plaque réduisant le bruit des dispositifs et appareils numériques - Partie 3 : caractérisation des paramètres des plaques réduisant le bruit
NF EN 12896-8:2019 Transports publics - Modèle de données de référence - Partie 8 : tableaux de bord et statistiques
NF E05-031-2:2012 Geometrical product specifications (GPS) - Surface texture : Areal - Part 2 : terms, definitions and surface texture parameters.
NF P98-218-3:1995 Tests relating to pavements. Evenness tests. Part 3 : determination of longitudinal evennes indexes calculated from profilometer data.
NF S80-772:1992 Horology. Gold-plated watch-cases. Test methods for coatings.
NF EN ISO 21920-2:2022 Spécification géométrique des produits (GPS) - Etat de surface : méthode du profil - Partie 2 : termes, définitions et paramètres d'état de surface
NF E05-020:1998 Geometrical Product Specifications (GPS) - Surface texture : profile method - Motif parameters.
X11-508:1983 Correspondence table of metal wire cloth for test sieves.
NF EN 311:2002 Panneaux à base de bois - Arrachement de la surface - Méthode d'essai

Japanese Industrial Standards Committee (JISC), Table test parameter table

JIS C 1003:1976 Testing methods for digital voltmeters
JIS B 0660:1998 Surface roughness -- Terminology -- Part 1: Surface and its parameters
JIS B 7024:2022 Horology -- Magnetic resistant watches -- Classification, performance and test methods
JIS B 7001:1995 Watches and clocks -- Test methods
JIS B 7001:2018 Watches and clocks -- Test methods
JIS B 0601:2013 Geometrical Product Specifications (GPS).Surface texture: Profile method.Terms, definitions and surface texture parameters
JIS B 0601:2001 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
JIS C 1506:1981 Testing methods for electronic voltmeters
JIS B 0631:2000 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Motif parameters
JIS X 6913:2008 Standard specification form for digital duplicator and related testing procedure

Professional Standard - Agriculture, Table test parameter table

SN/T 2944-2011 Physical parameter table of natural gas components

Danish Standards Foundation, Table test parameter table

DS/ISO 4287/1:1986 Surface roughness Terminology Part 1: Surface and its parametres
DS/ISO 4287/2:1986 Surface roughness — Terminology Part 2: Parametres and characteristics of surface roughness
DS/EN ISO 4287/Corr. 2:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
DS/EN ISO 4287/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
DS/EN ISO 4287:1999 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
DS/EN 14390:2007 Fire test - Large-scale room reference test for surface products
DS/EN ISO 4287/A1:2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number
DS/EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
DS/EN ISO 12085/Corr. 1:2007 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters
DS/EN ISO 12085:1998 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters
DS/ISO 12085:1997 Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters
DS/EN ISO 8785:2000 Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
DS/ISO 4288:1986 Rules and procedures for the measurement of surface roughness parametres using stylus instruments
DS 2340:1988 Heat energy meters. Requirements and test methods
DS/EN 17035:2021 Surface active agents – Bio-based surfactants – Requirements and test methods
DS/CEN/TR 15990/AC:2011 Data Sheets - Footwear Tests Materials and Test Adhesives
DS/CEN/TR 15990:2010 Data Sheets - Footwear Tests Materials and Test Adhesives
DS/CEN/TR 15990:2021 Data sheets – Footwear tests materials and test adhesives

American Society of Mechanical Engineers (ASME), Table test parameter table

ASME B89 TECH REPT-1990 Parametric Calibration of Coordinate Measuring Machines Errata March 2002
ASME A17 Checklist 5-1985 Checklist for inspection and test of moving walks
ASME A17 Checklist 4-1989 Checklist for inspection and test of escalators
ASME PTC 4.1a-1964 Test form for abbreviated efficiency test - Summary sheet

NL-NEN, Table test parameter table

NEN 1869-1988 Paper and board - Units for expressing properties and references to test methods

North Atlantic Treaty Organization Standards Agency, Table test parameter table

STANAG 4222-1990 STANDARD SPECIFICATION FOR DIGITAL REPRESENTATION OF SHIPBOARD DATA PARAMETERS

IT-UNI, Table test parameter table

Indonesia Standards, Table test parameter table

SNI IEC 60739:2008 Digital counting ratemeter - Test method and characteristic
SNI TAPPI T 459 om-93-2010 Paper - Surface strength - wax pick test

International Electrotechnical Commission (IEC), Table test parameter table

IEC 60739:1983 Digital counting ratemeters. Characteristics and test methods
IEC 60650:1979 Analogue counting ratemeters. Characteristics and test methods
IEC TS 63291-2:2023 High voltage direct current (HVDC) grid systems and connected converter stations - Guideline and parameter lists for functional specifications - Part 2: Parameter lists
IEC 60808:1985 Complementary instrumentation for counting ratemeters. Characteristics and test methods
IEC 60205:2016/COR1:2018 Calculation of the effective parameters of magnetic piece parts; Corrigendum 1
IEC TR3 60736:1982 Testing equipment for electrical energy meters
IEC 60462:2010 Nuclear instrumentation - Photomultiplier tubes for scintillation counting - Test procedures

Korean Agency for Technology and Standards (KATS), Table test parameter table

KS C IEC 60739:2009 Digital counting ratemeters－Characteristics and test methods
KS B 0162-1999(2009) Surface roughness－Terminology－Part 1：Surface and its parameters
KS C IEC 60650:2009 Analogue counting ratemeters-Characteristics and test methods
KS M ISO 91-2:2008 Petroleum meaurement tables-Part 2: Tables based on a reference temperature of 20℃
KS B 5401-1997(2012) Watches and clocks - Test methods
KS B 5349-2006(2011) Oil meter：Test methods
KS B 5401-1982 Watches and clocks - Test methods
KS B 5401-1987 Watches and clocks - Test methods
KS C IEC 60444-8-2016(2021) Measurement of quartz crystal unit parameters ― Part 8: Test fixture for surface mounted quartz crystal units
KS M ISO 91-1:2008 Petroleum measurement tables-Part 1: Tables based on a reference temperature of 15℃ and 60℉
KS C 1006-1978(2001) TESTING METHODS FOR DIGITAL VOLTMETERS
KS B ISO 4287-2014(2019) Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
KS L 5111-2007 Flow table for use in tests of hydraulic cement
KS L 5111-1982 Flow table for use in tests of hydraulic cement
KS P ISO 7176-13:2008 Wheelchairs－Part 13：Determination of coefficient of friction of test surfaces
KS C 1006-2002 TESTING METHODS FOR DIGITAL VOLTMETERS
KS B ISO 4287:2008 Geometrical Product Specifications(GPS)-Surface texture:Profile method-Terms, definitions and surface texture parameters
KS B ISO 4287:2014 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
KS B ISO 25178-2:2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
KS C IEC 60736:2003 Testing equipment for electrical energy meters
KS B 5552-2004(2019) Impact testing machines for plastic matelials－Instrumentation
KS B ISO 12085:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method-Motif parameters
KS B ISO 12085:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method — Motif parameters
KS B ISO 8785-2014(2019) Geometrical Product Specification(GPS) — Surface imperfections — Terms, definitions and parameters
KS K 0584-2011 Test method for flammability of cloth：Surface burning test
KS K 0584-1981 Test method for flammability of cloth：Surface burning test
KS B ISO 12085-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method — Motif parameters
KS C 1203-2005 Weather-proof performance of electricity meters
KS C 9991-2019 Electromagnetic compatibility test method for meter
KS C IEC 60444-8:2016 Measurement of quartz crystal unit parameters ― Part 8: Test fixture for surface mounted quartz crystal units
KS K 0584-2016(2021) Test method for flammability of cloth：Surface burning test
KS K 0584-2022 Test method for flammability of cloth: Surface burning test
KS A ISO TR 16476:2018 Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials
KS A ISO TR 16476-2023 References establish and express metrological traceability of quantities assigned to references
KS B ISO 8785:2004 Geometrical Product Specifications(GPS)-Surface imperfections-Terms, definitions and parameters
KS B ISO 8785:2014 Geometrical Product Specification(GPS) — Surface imperfections — Terms, definitions and parameters
KS B 50075-2-2005 Heat meters-Part 2:Test methods
KS R 1156-2012 Instrument panel impact absorption test method
KS L 5111-2017 Flow table for use in tests of hydraulic cement
KS R 1156-2002(2007) Instrument panel impact absorption test method
KS F 2509-2002(2017) Methods of test for surface moisture in fine aggregate
KS L 5111-2017(2022) Flow table for use in tests of hydraulic cement
KS F 2509-1982 Methods of test for surface moisture in fine aggregate
KS K 0584-2016 Test method for flammability of cloth：Surface burning test

American Society for Testing and Materials (ASTM), Table test parameter table

ASTM E1623-11 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E1337-90 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM E1337-90(2018) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM D4103-90(1995)e1 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
ASTM D4103-90(2002) Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
ASTM D4103-17 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
ASTM E1143-05 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-99 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-05(2010) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-05(2015) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E670-09(2020) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM E1577-95(2000) Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis
ASTM E1577-11 Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis
ASTM E1577-04 Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis
ASTM F3400-19 Standard Test Method for In-situ Testing of Functional Properties of Equine Surfaces: Artificial Surfaces
ASTM E1143-05(2019) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM D7330-11 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM D3409-93(2002)e1 Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
ASTM D3409-93(2002) Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
ASTM D3409-93 Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
ASTM D2047-99 Standard Test Method for Static Coefficient of Friction of Polish-Coated Floor Surfaces as Measured by the James Machine

IETF - Internet Engineering Task Force, Table test parameter table

RFC 7114-2014 Creation of a Registry for smime-type Parameter Values

IN-BIS, Table test parameter table

IS 5532 Pt.2-1984

Professional Standard - Petroleum, Table test parameter table

SY 6146-1995 Drilling parameter instrumentation driller operation combination
SY/T 6146-1995 Drilling parameter instrument driller operation combination platform

ES-UNE, Table test parameter table

UNE-CLC/TS 50654-2:2020 HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2: Parameter Lists (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN ISO 25178-2:2023 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
UNE-EN ISO 21920-2:2023 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
UNE-CEN/TR 15990:2022 IN Data Sheets - Footwear Tests Materials and Test Adhesives

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Table test parameter table

IEEE 1051-1988 Recommended Practice for Parameters to Characterize Digital Loop Performance

European Committee for Electrotechnical Standardization（CENELEC）, Table test parameter table

CLC/TS 50654-2-2018 HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2: Parameter Lists

PT-IPQ, Table test parameter table

NP 3284-1986 Peintures et vernis. Fiche technique de produit

Group Standards of the People's Republic of China, Table test parameter table

T/CMA SB145-2023 General technical requirements for multi-parameter smart water meter
T/CIMA 0028-2021 Inspection specification for hand-held digital multimeter
T/CMA SB 003-2009 Guidelines for selection of flow parameters for drinking cold water meters and hot water meters for measuring water flow in closed full pipes
T/CFA 03110317-2020 Parameter representations for foundry mold or core by binder jetting process

US-FCR, Table test parameter table

FCR COE CERC-94-1 FINAL REPORT-1994 THREE-PARAMETER CHARACTERIZATION OF SHALLOW-WATER DIRECTIONAL WIND WAVE SPECTRA

Professional Standard - Automobile, Table test parameter table

QC/T 499-1999 Types, parameters and dimensions of thermometers for automobiles
QC/T 500-1999 Types, parameters and dimensions of pressure gauges for automobiles
QC/T 497-1999 Types, parameters and dimensions of ammeters for automobiles
QC/T 498-1999 Types, parameters and dimensions of fuel gauges for automobiles
QC/T 495-1999 Parameters and dimensions of magnetic induction tachometers for automobiles
QC/T 753-2006 Motorcycles and mopeds--The form format of technical parameters
QC/T 753-2016 Format of technical data sheets for motorcycles and mopeds
QC/T 496-1999 Parameters and dimensions of magnetic induction speedometer for automobiles
QC/T 698.1-2004 Vehicle instructions-Part 1:Vehicle registration technology parameter table

工业和信息化部/国家能源局, Table test parameter table

JB/T 4136.1-2017 Instrument Lathes Part 1: Types and Parameters
JB/T 7307-2016 Test methods for timepieces for earthmoving machinery

ESDU - Engineering Sciences Data Unit, Table test parameter table

SPA-M12-1-2010 Sept.09: Characterisation of petroleum fouling with respect to operational parameters: an experimental study

Professional Standard - Commodity Inspection, Table test parameter table

SN/T 0812-1999 Electrotechnical instrument for export.Rules for the inspection of digital multi-use meter
SN/T 1843.3-2012 Rules for the inspection of instrumentation for import and export.Part 3:Analog/digital multimeter

AWS - American Welding Society, Table test parameter table

FGW APP E-1979 Tables E1 to E6 (Laboratory Data Sheets for Part V)
FGW APP D-1979 Tables D1 and D2 (Laboratory Data Sheets for Part IV)

Taiwan Provincial Standard of the People's Republic of China, Table test parameter table

CNS 4712-1993 Method of Test for Digital Electronic Watches
CNS 12424-1988 Method of Test for Specific External Surface of Pulp
CNS 7473-1986 Method of Rockwell Superficial Hardness Test
CNS 11397-1985 Method of Test for Surface pH of Paper
CNS 10579-1994 Method of Test for Surface Strength of Paper and Paperboard (IGT Tester)
CNS 11445-4-1998 Method for determining synchronous machine quantities from test
CNS 11445.4-1998 Method for determining synchronous machine quantities from test
CNS 11445-4 Synchronous machine motor parameter test method
CNS 2779-1994 Sampling Procedure and Tables for Inspection by Attributes
CNS 8477-1982 Method of Test for Surface Insulation Resistivity of Single - Strip Specimens
CNS 13101-1992 Method of Corrodkote Procedure Corrosion Testing for Decorative Electroplated Coating
CNS 9358-1982 Method of Test for Weather-proof Performance of Electricity Meters
CNS 489-1993 Method of Test for Surface Moisture in Fine Aggregates

Association of German Mechanical Engineers, Table test parameter table

VDI/VDE 2601-1991 Requirements on the surface structure to cover function capability of surfaces manufactured by cutting; list of parameters
VDI 6031-2006 Acceptance test of cooling surfaces for rooms

AGMA - American Gear Manufacturers Association, Table test parameter table

08FTM03-2008 Effects of Gear Surface Parameters on Flank Wear

Standard Association of Australia （SAA）, Table test parameter table

AS 2805.11:2000 Electronic funds transfer - Requirements for interfaces - Card parameter table
AS 2805.11:2000(R2013)
ISO 12085:1996/Cor.1:1998 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Motif parameters TECHNICAL CORRIGENDUM 1
MP 68-1992 Test method assessment sheet
AS 3696.13:1991 Wheelchairs - Determination of coefficient of friction of test surfaces
AS 3696.13:1991(R2014)

Professional Standard - Military and Civilian Products, Table test parameter table

WJ/Z 318-1993 Compilation and Management of Test Data Tables in Ordnance Industry Proving Ground

BE-NBN, Table test parameter table

NBN B 15-225-1984
NBN T 04-186-1983 Methyl ethyl ketone for industrial use - List of methods of test
NBN T 04-061-1983 Furfural for industrial use - List of methods of test
NBN T 04-433-1983 Chlorobenzene for industrial use - List of methods of test
NBN T 04-437-1983 Chloroform for industrial use - List of methods of test
NBN T 63-003-1988 Surface active agents - Water used as a solvent for tests - Spécification and test methods

American Gear Manufacturers Association, Table test parameter table

AGMA 08FTM03-2008 Effects of Gear Surface Parameters on Flank Wear

机械工业部, Table test parameter table

JB/T 56214-1992 Guidelines for instrument reliability verification tests and measurement tests (exponential distribution)

Society of Automotive Engineers (SAE), Table test parameter table

SAE J1059-2011 Speedometer Test Procedure
SAE J864-1993 Surface Hardness Testing with Files

SAE - SAE International, Table test parameter table

SAE J1059-1973 Speedometer Test Procedure
SAE J864-1984 Surface Hardness Testing with Files@ Recommended Practice
SAE J864-2018 Surface Hardness Testing with Files
SAE J864-1963 SURFACE HARDNESS TESTING WITH FILES

未注明发布机构, Table test parameter table

DIN EN ISO 4287:1998 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters
BS EN ISO 21920-2:2022(2023) Geometrical product specifications (GPS) — Surface texture : Profile Part 2 : Terms, definitions and surface texture parameters
BS EN ISO 8785:1999(2002) Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters
BS EN ISO 12085:1997(2009) Geometric Product Specification (GPS) — Surface texture : Profile method — Motif parameters

Lithuanian Standards Office , Table test parameter table

LST EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)
LST EN 14390-2007 Fire test - Large-scale room reference test for surface products
LST EN ISO 4287:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997)
LST EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)

Military Standard of the People's Republic of China-General Armament Department, Table test parameter table

GJB 2765.3-1996 Data network protocol consistency test tree table combination representation
GJB 17.5-1984 Test methods for aviation wires and cables Surface resistance test

国家市场监督管理总局、中国国家标准化管理委员会, Table test parameter table

GB/T 37006-2018 Testing equipment for digital input electricity meters

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Table test parameter table

GJB 179A-1996 Counting sampling inspection procedures and tables

Institute of Electrical and Electronics Engineers (IEEE), Table test parameter table

ANSI/IEEE Std 1051-1988 IEEE Recommended Practice for Parameters to Characterize Digital Loop Performance
IEEE 167A-1987 High definition facsimile test chart

Hebei Provincial Standard of the People's Republic of China, Table test parameter table

DB13/T 1702-2013 Digital display temperature and humidity meter test method
DB13/T 5292-2020 Calibration Method of Digital Source Meter Test System

VN-TCVN, Table test parameter table

TCVN 5120-2007 Geometrical Product Specifications (GPS).Surface texture: Prof in method.Terms, definitions and surface texture parameters
TCVN 4796-1989 Nuts.Surface defects.Test methods
TCVN 2511-2007 Geometrical Product Specifications (GPS).Surface texture: Profile method.Motif parameters

Canadian Standards Association (CSA), Table test parameter table

CSA ISO/IEC 8824-4-04-CAN/CSA CORR 1:2008 Information technology ?Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications TECHNICAL CORRIGENDUM 1

AENOR, Table test parameter table

UNE-EN 14390:2007 Fire test - Large-scale room reference test for surface products
UNE 7018:2000 Materials tests. Rules for expressing some numerical specifications of materials tests.
UNE-CEN/TR 15990:2011 IN Data Sheets - Footwear Tests Materials and Test Adhesives
UNE-EN ISO 25178-2:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)

ES-AENOR, Table test parameter table

KR-KS, Table test parameter table

KS B ISO 25178-2-2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
KS B ISO 25178-2-2022 Geometrical product specifications(GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture paramet
KS A ISO TR 16476-2018 Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials

National Metrological Verification Regulations of the People's Republic of China, Table test parameter table

JJG(电子) 02003-1988 Trial Verification Regulations for DO30-C Digital Three-purpose Meter Calibrator
JJG(民航) 007-1995 Verification Regulation of Temperature Indicator Test Bench "УПТ-1M"
JJG(轻工) 85-1991 Verification Regulations for Watch Shockproof Tester
JJG 315-1983 Verification Regulation of DC Digital Voltmeter
JJG 598-1989 Verification Regulation of DC Digital Amperemeter

Professional Standard - Earthquake, Table test parameter table

DB/T 21-2007 Technical requirements of instruments in network for earthquake monitoring.The description of common technical parmneter and test method

CEN - European Committee for Standardization, Table test parameter table

EN ISO 4287:1998/PRA2:2013 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms@ definitions and surface texture parameters - Amendment 2
EN 1434-5:1997 Heat meters - Part 5: Initial verification tests (Incorporates Amendment A1: 2002)
PD CEN/TR 15990:2010 Data Sheets - Footwear Tests Materials and Test Adhesives

Professional Standard - Water Conservancy, Table test parameter table

SL 237-030-1999 Code for test of soil - soil deformation parameter test

GOSTR, Table test parameter table

GOST R 58866-2020 Instrument rolling bearings. Methods for controlling geometrical parameters of bearing parts

International Truck and Engine Corporation (ITEC), Table test parameter table

INTERN CEMS BT-32-2009 Apparent Density Of Solid Matter Test

National Electrical Manufacturers Association（NEMA), Table test parameter table

NEMA WC 61-2005 Transfer Impedance Testing

CU-NC, Table test parameter table

NC 54-288-1984 Construction Materials and Products. Procedure for Pe'rforming Gaging Tests for Determining the Hydrogeological Parameters. Testing Method

GM North America, Table test parameter table

GM GM9300P-2001 Impact Test for Plastic Materials (Instrumented or Non-Instrumented)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Table test parameter table

GB/T 33523.2-2017 Geometrical product specifications (GPS)—Surface texture:Areal—Part 2: Terms, definitions and surface texture parameters

VDE - VDE Verlag GmbH@ Berlin@ Germany, Table test parameter table

FNN WIRKVERBRAUCHZAEHLER@ WECHSELSTROM-2009 Leitfaden fuer die Annahmepruefung von Wechselstrom-Wirkverbrauchzaehlern

(U.S.) Parachute Industry Association, Table test parameter table

PIA-TS-120 2.01-1995 AAD Design and Testing Report Format
PIA-TS-120 AIRTEC-2004 AAD Design and Testing Report Format

TR-TSE, Table test parameter table

TS 1804-1975 FURFURAL FOR INDUSTRIAL USE LIS1 OF METHODS OF TEST

NEMA - National Electrical Manufacturers Association, Table test parameter table

NEMA C39.3-1976 SHOCK TESTING FOR ELECTRICAL INDICATING INSTRUMENTS

IPC - Association Connecting Electronics Industries, Table test parameter table

IPC TM-650 2.3.38B-1997 Surface Organic Contaminant Detection Test
IPC TM-650 2.3.38C-2004 Surface Organic Contaminant Detection Test

Canadian General Standards Board （CGSB), Table test parameter table

CGSB 4.2 NO. 27.2-94-CAN/CGSB-1994 Methodes Pour Epreuves Textiles Resistance A La Flamme - Essai De Brulage En Surface

Professional Standard - Textile, Table test parameter table

FZ/T 01054.2-1999 Fabric Style Test Method Surface Friction Test Method