ZH
RU
ES

Organic Transparency Test

Organic Transparency Test, Total:380 items.

In the international standard classification, Organic Transparency Test involves: Plastics, Paper and board, Organic chemicals, Cinematography, Packaging materials and accessories, Measurement of volume, mass, density, viscosity, Petroleum products in general, Rubber and plastics products, Lubricants, industrial oils and related products, Linear and angular measurements, Optoelectronics. Laser equipment, Optics and optical measurements, Paint ingredients, Pharmaceutics, Dentistry, Lamps and related equipment, Ceramics, Components for aerospace construction, Structure and structure elements, Paints and varnishes, Materials for aerospace construction, Wood, sawlogs and sawn timber, Air quality, Testing of metals, Glass, Surface treatment and coating, Diagnostic, maintenance and test equipment, Internal combustion engines, Measurement of fluid flow, Protection against fire, Electrical engineering in general, Environmental testing, Electronic components in general, Construction materials, Products of the textile industry, Coatings and related processes used in aerospace industry, Machine tools, Laboratory medicine, Cereals, pulses and derived products, Leather technology, Heat pumps.

Military Standard of the People's Republic of China-General Armament Department, Organic Transparency Test

GJB 1088A-2021 Test method for clarity of aircraft transparent parts

American Society for Testing and Materials (ASTM), Organic Transparency Test

ASTM D542-00(2006) Standard Test Method for Index of Refraction of Transparent Organic Plastics
ASTM D542-13 Standard Test Method for Index of Refraction of Transparent Organic Plastics
ASTM D542-14 Standard Test Method for Index of Refraction of Transparent Organic Plastics
ASTM D445-14 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids 40;and Calculation of Dynamic Viscosity41;
ASTM D445-14e1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids 40;and Calculation of Dynamic Viscosity41;
ASTM D445-14e2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids &40;and Calculation of Dynamic Viscosity&41;
ASTM D445-17 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D1003-92 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D1003-21 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D445-16 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D445-19a Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D7279-18e1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-06 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D445-21 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D445-19 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D7279-16 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-08 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-18 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-20 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D445-17a Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D542-00 Standard Test Method for Index of Refraction of Transparent Organic Plastics
ASTM D1746-97 Standard Test Method for Transparency of Plastic Sheeting
ASTM D1746-03 Standard Test Method for Transparency of Plastic Sheeting
ASTM D1746-23 Standard Test Method for Transparency of Plastic Sheeting
ASTM D7279-14 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-14a Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D1003-07 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM B588-88(2006) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM B588-88(1994) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM B588-88(2010) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM D8005-23 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM B588-88(2001) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM F640-07 Standard Test Methods for Determining Radiopacity for Medical Use
ASTM F640-12 Standard Test Methods for Determining Radiopacity for Medical Use
ASTM F801-96 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F801-96(2002) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D1545-98 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM F801-16 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F801-21 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D1308-02e1 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D1308-02 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D1308-02(2007) Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D1308-02(2013) Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM F801-96(2008) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F1165-98 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM D1545-76(1989)e1 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM F1165-98(2004) Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM D1545-13(2017) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM E1348-02(2007) Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1348-02 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM D1545-07 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545-07(2012) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545-13(2023) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545-13 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM F1165-15 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM D7520-16(2023) Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM D7520-13 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM D7520-16 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM D7520-09 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM D1212-91(2007) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D589-97 Standard Test Method for Opacity of Paper (15176;Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing)
ASTM D589-97(2002) Standard Test Method for Opacity of Paper (15176;Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing)
ASTM F2469-20 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F2469-15 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D1044-19 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser
ASTM E1348-15 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM D5089-95(2008) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM D2134-19 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM F1769-97 Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)
ASTM D1212-91(2001) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91(1996)e1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91(2020) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91(2013) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91(2007)e1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D2134-93 Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM D6093-97(2011) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D4366-16(2021) Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM D4366-95 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM D2106-07(2022) Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
ASTM D4366-14 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM D1005-95 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D1005-95(2020) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D2134-93(2001) Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM D2134-93(2012) Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM D4366-16 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM D2134-93(2007) Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM D1005-95(2001) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D2106-05 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
ASTM D2106-07(2017) Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
ASTM D1005-95(2007) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D5108-90(2002) Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water
ASTM D5108-90(2007) Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water

German Institute for Standardization, Organic Transparency Test

DIN 53147:1993-01 Testing of Paper; determination of transparency
DIN 53147:1993 Testing of Paper; determination of transparency
DIN 6125:2021-10 Packaging test - Opaque and/or white pigmented films - Determination of opacity
DIN 6125:2021 Packaging test - Opaque and/or white pigmented films - Determination of opacity
DIN 53146:2016-05 Testing of paper and board - Determination of opacity
DIN 53146:2016 Testing of paper and board - Determination of opacity
DIN 53146:2000 Testing of paper and board - Determination of opacity
DIN EN ISO 13116:2015-03 Dentistry - Test Method for Determining Radio-Opacity of Materials (ISO 13116:2014); German version EN ISO 13116:2014
DIN EN 2155-9:1989-11 Aerospace series; test methods for transparent materials for aircraft glazing; part 9: determination of haze; german version EN 2155-9:1989
DIN EN 2155-13:1993-04 Aerospace series; test methods for transparent materials for aircraft glazing; part 13: determination of temperature at deflection under load; German version EN 2155-13:1993
DIN EN 2155-5:1989-11 Aerospace series; test methods for transparent materials for aircraft glazing; part 5: determination of visible light transmission; german version EN 2155-5:1989
DIN 50157-1:2020 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 1: Test method
DIN 51366:2013-12 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
DIN EN 2155-14:1993-04 Aerospace series; test methods for transparent materials for aircraft glazing; part 14: determination of the 1/10 vicat softening temperature; German version EN 2155-14:1993
DIN 51366:1977 Testing of mineral oil hydrocarbons; measurement of kinematic viscosity by means of the Cannon-Fenske viscometer, for opaque liquids
DIN 51366:2013 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
DIN 50158-1:2008-07 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method
DIN 50157-2:2020 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
DIN EN 2155-3:1993-04 Aerospace series; test methods for transparent materials for aircraft glazing; part 3: determination of refractive index; German version EN 2155-3:1993
DIN EN 2155-2:1993-03 Aerospace series; test methods for transparent materials for aircraft glazing; part 2: determination of water absorption; german version EN 2155-2:1993
DIN 50158-2:2008-04 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 2: Verification and calibration of the testing devices
DIN EN 2155-8:1989-11 Aerospace series; test methods for transparent materials for aircraft glazing; part 8: determination of optical distortion; german version EN 2155-8:1989
DIN EN ISO 105-D02:2016-12 Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents (ISO 105-D02:2016, Corrected version 2016-07-01); German version EN ISO 105-D02:2016
DIN 50157-1:2020-11 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 1: Test method
DIN EN 2155-19:1996-12 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 19: Determination of crace resistance; German version EN 2155-19:1996
DIN EN 2155-9:1989 Aerospace series; test methods for transparent materials for aircraft glazing; part 9: determination of haze; german version EN 2155-9:1989
DIN EN 2155-7:1997-09 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 7: Determination of optical deviation; German version EN 2155-7:1997
DIN EN 2155-12:1997-09 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 12: Determination of linear thermal expansion; German version EN 2155-12:1997
DIN EN ISO 105-X05:1997-05 Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents (ISO 105-X05:1994); German version EN ISO 105-X05:1997
DIN EN 2155-21:1989-11 Aerospace series; test methods for transparent materials for aircraft glazing; part 21: determination of resistance to crack propagation (K-factor); german version EN 2155-21:1989
DIN 50157-2:2020-11 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices

ES-AENOR, Organic Transparency Test

HU-MSZT, Organic Transparency Test

MSZ 12750/4-1971

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Organic Transparency Test

GB/T 13216.2-1991 Test methods for glycerines--Determination of transparency
GB/T 6324.7-2014 Test methods for organic chemical products - Part 7: Determination of melt color

Association Francaise de Normalisation, Organic Transparency Test

NF T51-068:1983 Plastics. Determination of transparency of a testpiece.
NF S91-267*NF EN ISO 13116:2014 Dentistry - Test method for determining radio-opacity of materials
NF R10-025-4:2016 Véhicules routiers - Mesurage de l'opacité des gaz d'échappement émis par les moteurs à allumage par compression (diesel) - Partie 4 : procédures de contrôle des opacimètres commerciaux à flux partiel
NF X10-702:2023 Méthodes d'essai au feu - Détermination de l'opacité des fumées en atmosphère non renouvelée
NF R10-025-3:2016 Véhicules routiers - Mesurage de l'opacité des gaz d'échappement émis par les moteurs à allumage par compression (diesel) - Partie 3 : procédure de contrôle des polluants visibles (opacité) des gaz d'échappement
NF L17-707*NF EN 3863:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness
NF R10-025-1:2016 Véhicules routiers - Mesurage de l'opacité des gaz d'échappement émis par les moteurs à allumage par compression (diesel) - Partie 1 : opacimètre de référence
X10-702-4:1994 Fire test methods. Determination of the opacity of the fumes in an atmosphere without air renewal. Part 4 : test method for materials used as panel linings.
X10-702-3:1994 Fire test methods. Determination of the opacity of the fumes in an atmosphere without air renewal. Part 3 : test method for materials used in upholstered furniture.
NF B51-008:2017 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
NF Q03-006:1983 Paper and board tests. Measurement of opacity (white paper backing) (diffuse reflectance method).
NF EN IEC 60695-6-2:2018 Essais relatifs aux risques du feu - Partie 6-2 : opacité des fumées - Résumé et pertinence des méthodes d'essais
NF L17-600-13*NF EN 2155-13:1993 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 13 : determination of temperature at deflection under load.
NF L17-709*NF EN 3864:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of modulus of rupture
NF EN 1184:1997 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai visant à déterminer la translucidité des objets en céramique
NF L17-600-14*NF EN 2155-14:1993 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 14 : determination of the 1/10 vicat softening temperature.
NF R10-025-2:2016 Véhicules routiers - Mesurage de l'opacité des gaz d'échappement émis par les moteurs à allumage par compression (diesel) - Partie 2 : spécifications techniques des opacimètres commerciaux à flux partiel
NF C20-902-1:1990 Fire hazard testing. Test methods. Determination of smoke opacity without air-change. Part one : methodology and test devices.
NF EN 3863:2013 Série aérospatiale - Matériaux non-métalliques - Transparents en verre - Méthodes d'essais - Détermination de la planéité
NF L17-708*NF EN 3866:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of ream and surface ripple
NF EN 2155-9:1989 Industrie aérospatiale - Méthodes d'essais pour matériaux transparents pour vitrages aéronautiques - Partie 9 - Détermination du flou.
NF EN ISO 105-D02:2016 Textiles - Essais de solidité des coloris - Partie D02 : solidité des coloris au frottement : solvants organiques
X10-702-2:1994 Fire test methods. Determination of the opacity of the fumes in an atmosphere without air renewal. Part 2 : test method applicable to the materials non covered by parts 3, 4, 5 and following.
NF B51-020-11*NF ISO 13061-11:2018 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 11 : determination of resistance to impact indentation
NF EN 14024:2005 Profilés métalliques à rupture de pont thermique - Performances mécaniques - Exigences, preuve et essais pour évaluation
C20-902-2-1:1990 Fire hazard testing. Test methods. Determination of smoke opacity without air-change. Part 2-1 : test methods for materials used in electric cables and in optical fiber cables.
NF C20-902/2-1:1990 Fire hazard testing - Test methods - Determination of smoke opacity without air-change - Part 2-1:Test methods for materials used in electric cables and in optical fiber cables.
NF L17-600-3*NF EN 2155-3:1993 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 3 : determination of refractive index
NF G52-303:1976 DETERMINATION OF FASTNESS TO ORGANIC SOLVENTS OF COULOURED LEATHERS.
NF EN 2155-13:1993 Série aérospatiale - Méthodes d'essais pour matériaux transparents pour vitrages aéronautiques - Partie 13 : Détermination de la température de fléchissement sous charge.
NF C71-868-1*NF EN IEC 62868-1:2021 Organic light emitting diode (OLED) Light sources for general lighting - Safety - Part 1 : general requirements and tests
NF EN IEC 62868-1:2021 Sources lumineuses à diodes électroluminescentes organiques (OLED) destinées à l'éclairage général - Sécurité - Partie 1 : exigences générales et essais

Korean Agency for Technology and Standards (KATS), Organic Transparency Test

KS B 5628-1991(2016) Test Transparencies for Overhead Projectors
KS C IEC 62341-6-4:2020 Organic light emitting diode(OLED) displays —Part 6-4: Measuring methods of transparent properties
KS R ISO 11614-2001(2016) Reciprocating internal combustion compression-ignition engines－ Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
KS R ISO 11614-2001(2021) Reciprocating internal combustion compression-ignition engines－ Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
KS F 2514-2002 Testing method for effect of organic impurities in fine aggregates on strength of mortar
KS F 2514-1986 Testing method for effect of organic impurities in fine aggregates on strength of mortar
KS B ISO 1701-1:2019 Test conditions for milling machines with table of variable height — Testing of the accuracy — Part 1: Machines with horizontal spindle
KS B ISO 2433:2020 Machine tools — Test conditions for external cylindrical and universal grinding machines with a movable table — Testing of the accuracy
KS B ISO 4703:2019 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy

CZ-CSN, Organic Transparency Test

CSN 50 0318-1961 Paper testing methods —Opacity of páper
CSN 80 0152-1978 Testing of colour fastness of textilea to rubbing with organic solvents
CSN 46 1011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)
CSN 461011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)

SE-SIS, Organic Transparency Test

SIS 13 61 03-1962 Method of test for 45-deg, 0-deg directional reflectance of opaque specimens
SIS SS-EN 2155-9-1989 Aerospace series — Test methods for transparent materials for aircraft glazing — Part 9: Determination ofhaze
SIS SS-EN 2155-8-1989 Aerospace series — Test methods for transparent materials for aircraft glazing — Part 8: Determination of optical distortion
SIS SS-EN 2155-5-1989 Aerospace series — Test methods for transparent materials for aircraft glazing — Part 5: Determination of visible light transmission
SIS SS-EN 2155-21-1989 Aerospace series — Test methods for transparent materials for aircraft glazing — Part 21: Determination of resistance to crackpropagation (K factor)
SIS SS-ISO 3070/1:1986 Test conditionsfor boring and milling machines with horizontal spindle - Testing of the accuracy - Part 1: Table type machines

Professional Standard - Aviation, Organic Transparency Test

HB 20081-2012 Test method for optical angular deviation of transparent parts
HB 20081-2012/0490 Test method for optical angular deviation of transparent parts

YU-JUS, Organic Transparency Test

JUS B.H8.022-1981 Testing of petroleum products — Determination ofkinematic viscosity of transparent and opaque liquids andcalculation ofdynamic viscosity

British Standards Institution (BSI), Organic Transparency Test

BS IEC 62341-6-4:2017 Organic light emitting diode (OLED) displays - Measuring methods of transparent properties
BS EN ISO 3104:1996 Methods of test for petroleum and its products - Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
BS ISO 20508:2004 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of light transmittance of ceramic films with transparent substrate
BS EN ISO 13116:2014 Dentistry. Test Method for Determining Radio-Opacity of Materials
BS EN 2155-5:1989 Specification for test methods for transparent materials for aircraft glazing - Determination of visible light transmission
BS EN 2155-14:1993 Test methods for transparent materials for aircraft glazing - Determination of the 1/10 Vicat softening temperature
BS EN 2155-3:1993 Specification for test methods for transparent materials for aircraft glazing - Determination of refractive index
BS EN 2155-13:1993 Test methods for transparent materials for aircraft glazing - Determination of temperature at deflection under load
13/30255935 DC BS ISO 13061-2. Physical and mechanical properties of wood. Test methods for small clear specimen. Part 2. Determination of density for physical and mechanical tests
BS EN 2155-9:1989 Specification for test methods for transparent materials for aircraft glazing - Determination of haze
BS EN 2155-2:1993 Specification for test methods for transparent materials for aircraft glazing - Determination of water absorption
BS ISO 24117:2020 Tableware, giftware, jewellery and luminaries, made of glass. Glass clarity. Classification and test method
BS EN 2155-8:1989 Specification for test methods for transparent materials for aircraft glazing - Determination of optical distortion
BS ISO 13061-8:2022 Physical and mechanical properties of wood. Test methods for small clear wood specimens. - Determination of ultimate strength in shearing parallel to grain
BS EN 2155-12:1997 Specification for test methods for transparent materials for aircraft glazing - Determination of linear thermal expansion
BS ISO 13061-18:2022 Physical and mechanical properties of wood. Test methods for small clear wood specimens - Vocabulary
BS EN 3864:2013 Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of modulus of rupture
BS ISO 11614:1999 Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
15/30273230 DC BS ISO 13061-12. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 12. Determination of static hardness
BS 3900-D6:1982 Methods of test for paints. Optical tests on paint films. Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate, using polyester film
BS EN 3863:2013 Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of flatness
19/30392439 DC BS ISO 24117. Tableware, giftware, jewellery and luminaries, made of glass. Glass clarity. Classification and test method
BS ISO 13061-5:2020 Physical and mechanical properties of wood. Test methods for small clear wood specimens - Determination of strength in compression perpendicular to grain
15/30273227 DC BS ISO 13061-10. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 10. Determination of impact bending strength
13/30255938 DC BS ISO 13061-3. Physical and mechanical properties of wood. Test methods for small clear specimen. Part 3. Determination of ultimate strength in static bending
BS EN 2155-21:1989 Specification for test methods for transparent materials for aircraft glazing - Determination of resistance to crack propagation (K factor)
15/30273224 DC BS ISO 13061-5. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 5. Determination of strength in compression perpendicular to grain
21/30406125 DC BS ISO 13061-8. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 8. Determination of ultimate strength in shearing parallel to grain
18/30369622 DC BS ISO 13061-5. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 5. Determination of strength in compression perpendicular to grain
BS EN 12286:1999(2001) In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
BS EN 12286:1999 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
13/30255932 DC BS ISO 13061-1. Physical and mechanical properties of wood. Test methods for small clear specimen. Part 1. Determination of moisture content for physical and mechanical tests
21/30406122 DC BS ISO 13061-18. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 18. Vocabulary
BS EN IEC 62868-1:2021 Tracked Changes. Organic light emitting diode (OLED) Light sources for general lighting. Safety. General requirements and tests
16/30279978 DC BS ISO 13061-16. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 16. Determination of volumetric swelling
BS ISO 8178-9:2019 Reciprocating internal combustion engines. Exhaust emission measurement - Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter

GM North America, Organic Transparency Test

GM GM9318P-1994 Test for Determining Acoustic Transparency of a Speaker Covering

RO-ASRO, Organic Transparency Test

STAS 11040-1988 APPARATUS FOR MEASUREMENT OF OPACITY OF EXHAUST GASES FROM DIESEL ENGINES
STAS 8446-1979 ORGANIC DYE STUFFS Determination of colour fastness to artificial light of xenon lamp
STAS 6148-1970 ORGANIC DYESTUFFS Test for eolour fastncss to sublimation in storage
STAS 6043-1985 ORGANIC DYESTI1FFS Test for co?our faslnrss Io alkaline milling
STAS 11567-1982 Surface grinding machines with two columns SLIDEWAY GRINDING MACHINES Testings of accuracy
SR 1701-1995 Test condi?iona for milling machines with table of variable height, with horizontal or vertical spjndle - Part 0: General introrfuction
STAS 11337/1-1989 POLYESTER RESINS REINFORCED WITH GLASS FIBRES General specifications for strength determination at chemical agents action

Professional Standard - Aerospace, Organic Transparency Test

QJ 2194-1991 Test method for gas permeability coefficient of organic materials

International Organization for Standardization (ISO), Organic Transparency Test

ISO 7645:1988 Road vehicles; measurement of opacity of exhaust gas from compression-ignition (diesel) engines; steady single-speed test
ISO 13116:2014 Dentistry - Test Method for Determining Radio-Opacity of Materials
ISO 7644:1988 Road vehicles; measurement of opacity of exhaust gas from compression-ignition (diesel) engines; lug-down test
ISO 13061-2:2014/Amd 1:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests — Amendment 1
ISO 13061-5:2020 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 5: Determination of strength in compression perpendicular to grain
ISO 13061-3:2014/Amd 1:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 3: Determination of ultimate strength in static bending — Amendment 1
ISO 13061-8:2022 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 8: Determination of ultimate strength in shearing parallel to grain
ISO 3129:2019 Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens
ISO 13061-16:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 16: Determination of volumetric swelling
ISO 13061-13:2016 Physical and mechanical properties of wood - Test methods for small clear wood specimens- Part 13:Determination of radial and tangential shrinkage
ISO 13061-1:2014/Amd 1:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests — Amendment 1
ISO 13061-15:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 15: Determination of radial and tangential swelling

KR-KS, Organic Transparency Test

KS P ISO 13116-2017 Dentistry ─ Test Method for Determining Radio-Opacity of Materials
KS P ISO 13116-2022 Dentistry — Test method for determining radio-opacity of materials
KS C IEC 62341-6-4-2020 Organic light emitting diode(OLED) displays —Part 6-4: Measuring methods of transparent properties
KS B ISO 1701-1-2019 Test conditions for milling machines with table of variable height — Testing of the accuracy — Part 1: Machines with horizontal spindle
KS B ISO 2433-2020 Machine tools — Test conditions for external cylindrical and universal grinding machines with a movable table — Testing of the accuracy
KS B ISO 4703-2019 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy

AENOR, Organic Transparency Test

UNE-EN 2155-9:1992 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 9: DETERMINATION OF HAZE.
UNE-EN 2155-13:1994 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 13: DETERMINATION OF TEMPERATURE AT DEFLECTION UNDER LOAD.
UNE-EN 2155-5:1992 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 5: DETERMINATION OF VISIBLE LIGHT TRANSMISSION.
UNE-EN 2155-14:1994 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 14: DETERMINATION OF THE 1/10 VICAT SOFTENING TEMPERATURE.
UNE 82503:1999 MEASURING INSTRUMENTS. APPARATUS FOR MEASUREMENT OF THE OPACITY AND FOr determination of the light absorption coefficient of exhaust gas in compression-ignition engines.
UNE-EN 2155-19:1997 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 19: DETERMINATION OF CRAZE RESISTANCE.
UNE-EN 2155-8:1992 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 8: DETERMINATION OF OPTICAL DISTORTION
UNE-EN 2155-7:1998 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 7: DETERMINATION OF OPTICAL DEVIATION.
UNE-EN 2155-21:1993 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. DETERMINATION OF RESISTANCE TO CRACK PROPAGATION (K FACTOR).
UNE-EN 2155-12:1998 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 12: DETERMINATION OF LINEAR THERMAL EXPANSION.
UNE-EN ISO 105-X05:1997 TEXTILES. TESTS FOR COLOUR FASTNESS. PART X05: COLOUR FASTNESS TO ORGANIC SOLVENTS. (ISO 105-X05:1994).

Group Standards of the People's Republic of China, Organic Transparency Test

T/CSA 015-2012 Organic light emitting diode (OLED) lighting—Measuring methods

European Committee for Standardization (CEN), Organic Transparency Test

EN ISO 13116:2014 Dentistry - Test Method for Determining Radio-Opacity of Materials (ISO 13116:2014)
EN 3864:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of modulus of rupture
EN 2155-8:1989 Test Method for Transparent Materials for Aircraft Glazing Part 8: Determination of Optical Distortion
EN 2155-2:1993 Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 2: Determination of Water Absorption
prEN 2155-19-1981 Aerospace series; test methods for transparent materials for aircraft glazing; part 19: determination of crace resistance
prEN 2155-2-1991 Aerospace series; test methods for transparent materials for aircraft glazing; part 2: determination of water absorption
prEN 2155-3-1991 Aerospace series; test methods for transparent materials for aircraft glazing; part 3: determination of refractive index
prEN 2155-6-1980 Aerospace series; test methods for transparent materials for aircraft glazing; part 6: determination of optical defects
prEN 2155-15-1981 Aerospace series; test methods for transparent materials for aircraft glazing; part 15: determination of thermal stability
EN 2155-13:1993 Aerospace series; test methods for transparent materials for aircraft glazing; part 13: determination of temperature at deflection under load
prEN 2155-12-1981 Aerospace series; test methods for transparent materials for aircraft glazing; part 12: determination of linear thermal expansion
EN 2155-7:1997 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 7: Determination of optical deviation
EN 2155-12:1997 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 12: Determination of linear thermal expansion

Japanese Industrial Standards Committee (JISC), Organic Transparency Test

JIS T 6006:2018 Dentistry -- Test Method for Determining Radio-Opacity of Materials
JIS C 0080:2001 Fire hazard testing -- Part 6: Guidance and test methods on the assessment of obscuration hazard of vision caused by smoke opacity from electrotechnical products involved in fires -- Section 30: Small scale static method -- Determination of smoke opacity
JIS C 62868-1:2022 Organic light emitting diode (OLED) light sources for general lighting -- Safety-Part 1: General requirements and tests

SG-SPRING SG, Organic Transparency Test

SS 323 Pt.B3-1987 Methods Of Test For Flexible Plastic Packaging Materials Part B3 : Determination Of Transparency
SS 323 Pt.B1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part B1 : Determination Of Haze And Luminous Transmittance Of Transparent Plastics
SS 323 Pt.D4-1987 Methods Of Test For Flexible Plastic Packaging Materials Part D4 : Determination Of Resistance Of Grease And Oil

IN-BIS, Organic Transparency Test

(U.S.) Ford Automotive Standards, Organic Transparency Test

FORD FLTM BI 019-1-2001 TEST PROCEDURES FOR THICKNESS MEASUREMENT OF CLEAR SYNTHETIC BAKING ENAMEL COATING ON SYNTHETIC WOOD
FORD FLTM BI 019-01-2001 TEST PROCEDURES FOR THICKNESS MEASUREMENT OF CLEAR SYNTHETIC BAKING ENAMEL COATING ON SYNTHETIC WOOD

机械工业部, Organic Transparency Test

JB/T 8256.3-1995 Test method for screen brightness and contrast of transparent microform readers

Danish Standards Foundation, Organic Transparency Test

DS/EN 2155-9:1989 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 9: Determination of haze
DS/EN 2155-5:1989 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 5: Determination of visible light transmission
DS/EN 3863:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness
DS/EN 2155-8:1989 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 8: Determination of optical distortion
DS/EN 2155-19:1997 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 19: Determination of craze resistance
DS/EN 2155-7:1998 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 7: Determination of optical deviation
DS/EN 2155-12:1998 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 12: Determination of linear thermal expansion
DS/EN 2155-14:1993 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 14: Determination of the 1/10 Vicat softening temperature

Lithuanian Standards Office , Organic Transparency Test

LST EN 2155-9-2001 Aerospace series - Test method for transparent materials for aircraft glazing - Part 9 : Determination of haze
LST EN 2155-13-2001 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 13: Determination of temperature at deflection under load
LST ISO 11614:2000 Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
LST EN 2155-5-2001 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 5: Determination of visible light transmission
LST EN 2155-14-2001 Aerospace series - Test methods for tranparent materials for aircraft glazing - Part 14: Determination of the 1/10 Vicat softening temperature
LST EN 3863-2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness
LST EN 2155-19-2001 Aerospace series - Test methods for transparent materials for aircraft materials for aircraft glazing - Part 19: Determination of craze resistance
LST EN 2155-3-2001 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 3: Determination of refractive index
LST EN 2155-2-2001 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 2: Determination of water absorption
LST EN 2155-8-2001 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 1: Determination of optical distortion
LST EN 2155-7-2001 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 7: Determination of optical deviation
LST EN 2155-12-2001 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 12: Determination of linear thermal expansion
LST EN ISO 105-D02:2000 Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents (ISO 105-D02:1993)
LST EN ISO 105-X05:1998 Textiles - Tests for colour fastness - Part X05: Colour fastness - Part X05: Colour fastness to organic solvents (ISO 105-X05:1994)

未注明发布机构, Organic Transparency Test

BS EN 2155-13:1993(1999) Test methods for transparent materials for aircraft glazing — Part 13 : Determination oftemperature at deflection under load
BS EN 2155-5:1989(1999) Test methods for transparent materials for aircraft glazing — Part 5 : Determination ofvisible light transmission
BS EN 2155-14:1993(1999) Test methods for transparent materials for aircraft glazing — Part 14 : Determination ofthe 1 / 10 Vicat softening temperature
BS EN 2155-2:1993(2000) Test methods for transparent materials for aircraft glazing — Part 2 : Determination ofwater absorption
BS EN 2155-3:1993(1999) Test methods for transparent materials for aircraft glazing — Part 3 : Determination ofrefractive index
BS EN 2155-12:1997(2000) Test methods for transparent materials for aircraft glazing — Part 12 : Determination oflinear thermal expansion
BS EN 2155-8:1989(1999) Test methods for transparent materials for aircraft glazing — Part 8 : Determination ofoptical distortion
BS EN ISO 105-D02:2016(2018) Textiles – Tests for colour fastness Part D02 : Colour fastness to rubbing : Organic solvents
BS EN 2155-21:1989(2000) Test methods for transparent materials for aircraft glazing — Part 21 : Determination ofresistance to crack propagation (K factor)

International Electrotechnical Commission (IEC), Organic Transparency Test

IEC 62341-6-4:2017 Organic light emitting diode (OLED) displays - Part 6-4: Measuring methods of transparent properties

PL-PKN, Organic Transparency Test

PN S47406-1993 Road vehicles. Measurement of opacity of exhaust gas from compression-ignition (diesel) engines. Lug-down test
PN S47407-1993 Road vehicles.Measurement of opacity of exhaust gas from compression-ignition (diesel) engines. Steady single-speed test
PN D56240-1974 Woodworking machines Wide belt sanders with belt feed Test of accuracy
PN D56231-1974 Woodworking machines Horizontal belt sanders with belt feed Test of accuracy
PN L01255-09-1991 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 9: Determination of haze
PN D56190-1990 Woodworking machines Vertical frame sawing machines with top drive Test of accuracy
PN D56200-1990 Woodworking machines Vertical frame sawing machines with bottom drive Test of accuracy
PN L01255-08-1991 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 8: Determination of optical distortion
PN D56202-1986 Woodworking machines Thickness planing machines with rotary cutterblocks Arrnrarv tests
PN D56219-1971 Woodworking machines Single-blade circular sawing ma- chines with axis of articulation above workpiece Accuracy tests

European Association of Aerospace Industries, Organic Transparency Test

AECMA PREN 3863-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Test Methods Determination of Flatness Edition P 1
AECMA PREN 3864-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Test Methods Determination of Modulus of Rupture Edition P 1
AECMA PREN 2155-1-1984 Test Methods for Transparent Materials for Aircraft Glazing Part 1 - Determination of the Density and Relative Density Aerospace Series Edition 1
AECMA PREN 3866-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Test Methods Determination of Ream and Surface Ripple Edition P 1
AECMA PREN 2155-14-1991 Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 14 - Determination of the 1/10 Vicat Softening Temperature Edition 1
AECMA PREN 2155-13-1989 Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 13 - Determination of Temperature at Deflection Under Load Edition 1

Professional Standard - Forestry, Organic Transparency Test

LY/T 2374-2014 Methods for determining penetration of effective ingredients in preservatives and fire retardants treated wood

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Organic Transparency Test

PREN 2155-1-1984 Test Methods for Transparent Materials for Aircraft Glazing Part 1 - Determination of the Density and Relative Density Aerospace Series (Edition 1)
PREN 2155-9-1981 Test Methods for Transparent Materials for Aircraft Glazing - Part 9 - Determination of Haze Aerospace Series (Edition 1)
PREN 3863-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Test Methods Determination of Flatness (Edition P 1)
PREN 2155-5-1984 Test Methods for Transparent Materials for Aircraft Glazing Part 5 - Determination of Visible Light Transmission Aerospace Series (Edition 1)
PREN 2155-13-1989 Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 13 - Determination of Temperature at Deflection Under Load (Edition 1)
PREN 2155-14-1991 Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 14 - Determination of the 1/10 Vicat Softening Temperature (Edition 1)
PREN 2155-20-1999 Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 20 - Determination of Retention of Strength After Crazing for as-Cast Acrylics (Edition 1)
PREN 2155-20-2000 Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 20: Determination of Retention of Strength After Crazing for as-Cast Acrylics (Edition P 1)
PREN 2155-15-2010 Aerospace series Test methods for transparent materials for aircraft glazing Part 15 : Determination of thermal stability (Edition 2)
PREN 2155-21-1981 Test Methods for Transparent Materials for Aircraft Glazing - Part 21 - Determination of Resistance to Crack Propagation Less Than Factor Greater Than
PREN 2155-4-1999 Aerospace Series - Test Methods for Transparent Materials for Aircraft Glazing Part 4 - Determination of Ultraviolet Light Transmission over the Wavelength Range 280 to 360 nm (Edition 2)

US-AAMA, Organic Transparency Test

AAMA 612-2002 Voluntary Specification, Performance Requirements, and Test Procedures for Combined Coatings of Anodic Oxide and Transparent Organic Coatings on Architectural Aluminum
AAMA 612-2015 Voluntary Specification, Performance Requirements, and Test Procedures for Combined Coatings of Anodic Oxide and Transparent Organic Coatings on Architectural Aluminum

ES-UNE, Organic Transparency Test

UNE-EN 3863:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness (Endorsed by AENOR in March of 2013.)
UNE-EN ISO 105-D02:2016 Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents (ISO 105-D02:2016)
UNE-EN IEC 62868-1:2021 Organic light emitting diode (OLED) Light sources for general lighting - Safety - Part 1: General requirements and tests (Endorsed by Asociación Española de Normalización in December of 2021.)

Electronic Components, Assemblies and Materials Association, Organic Transparency Test

ECA EIA-448-20-1989 Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature
ECA 448-20-1989 Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature

VN-TCVN, Organic Transparency Test

TCVN 7663-2007 Reciprocating internal combustion compression-ignition engine.Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas

Malaysia Standards, Organic Transparency Test

MS 1509-2000 Method of test for film hardness of an organic coating by pencil test
MS 133 Pt.D7-1999 Methods of test for paints and varnishes:part d7:determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film)
MS 133 Pt.D6-1999 Methods of test for paints and varnishes:part d6:determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts)

GM Daewoo, Organic Transparency Test

GMKOREA EDS-T-7782-2011 Test Method for the Thickness of the Dried Film of Organo- Coated Products

RU-GOST R, Organic Transparency Test

GOST R ISO 11614-2011 Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
GOST 11279.1-1983 Organic dyes. Testing method of dyeability (concentration), shade and purity
GOST 11279.4-1983 Organic dyes. Testing method of colour fastness to reagents
GOST R ISO 105-D02-2018 Textiles. Tests for colour fastness. Part D02. Colour fastness to rubbing. Organic solvents
GOST 11279.7-1983 Organic dyes. Testing methods of colour fastness to temperature processing in different media

NZ-SNZ, Organic Transparency Test

AS/NZS 1301.525:2016 Methods of test for pulp and paper Part 525: Determination of opacity (paper backing)-Diffuse reflectance method

Indonesia Standards, Organic Transparency Test

SNI 03-1751-1990 Weak parts, organic substance, sand hardness, crushed stoned hardness, Determination
SNI 07-2198-1991 Metallic coating and other organic materials, Definition and thickness measurement

AT-ON, Organic Transparency Test

ONORM EN 2155-14-1993 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 14: Determination of the 1/10 Vicat softening temperature
ONORM EN 2155-13-1993 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 13: Determination of temperature at deflection under load
ONORM C 9441 Teil.3-1984 Testing of elastomers; staining of organic materials by vulcanized elastomers; Penetration stain: method C
ONORM S 1483-1985 Testing of colour fastness oftextiles; determination of colour fastness of dyeings andprints to organic solvents
ONORM EN 2155-3-1993 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 3: Determination of refractive index
ONORM EN 2155-2-1993 Aerospace series - Test methods for transparent materials for aircraft glazing - Part 2: Determination of water absorption
ONORM S 1492-1986 Testing of colour fastness oftextiles; colour fastness ofdyeings andprints to rubbing with organic solvents
ONORM M 7753-1995 Heat pumps with electrically driven compressors for direct expansion, ground coupled - Testing and indication of the producer

TH-TISI, Organic Transparency Test

TIS 1353.12-1998 Standard test methods for paper and paper board.part 12: determination of opacity (paper backing).diffuse reflectance method

Aerospace, Security and Defence Industries Association of Europe (ASD), Organic Transparency Test

ASD-STAN PREN 3863-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Test Methods Determination of Flatness (Edition P 1)
ASD-STAN PREN 2155-1-1984 Test Methods for Transparent Materials for Aircraft Glazing Part 1 - Determination of the Density and Relative Density Aerospace Series (Edition 1)
ASD-STAN PREN 2155-15-2010 Aerospace series Test methods for transparent materials for aircraft glazing Part 15 : Determination of thermal stability Edition 2
ASD-STAN PREN 2155-9-1981 Test Methods for Transparent Materials for Aircraft Glazing - Part 9 - Determination of Haze Aerospace Series (Edition 1)

JO-JSMO, Organic Transparency Test

JS 1978-D-2-2021 Textiles - Tests for colour fastness Part D02: Colour fastness to rubbing: Organic solvents

European Committee for Electrotechnical Standardization（CENELEC）, Organic Transparency Test

EN IEC 62868-1:2021 Organic light emitting diode (OLED) Light sources for general lighting - Safety - Part 1: General requirements and tests

Association of German Mechanical Engineers, Organic Transparency Test

VDI/VDE/DGQ 2618 Blatt 17.1 Berichtigung-2015 Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines, Corrigendum concerning standard VDI/VDE/DGQ 2618 Blatt 17.1:2014-12