ZH
RU
ES

Hot pressing instrument parameters

Hot pressing instrument parameters, Total:497 items.

In the international standard classification, Hot pressing instrument parameters involves: Mechanical testing, Rectifiers. Convertors. Stabilized power supply, Testing of metals, Burners. Boilers, Optics and optical measurements, Internal combustion engines, Equipment for petroleum and natural gas industries, Fluid power systems, Piezoelectric and dielectric devices, Gears, Electricity. Magnetism. Electrical and magnetic measurements, Radiation measurements, Transformers. Reactors, Chipless working equipment, Optoelectronics. Laser equipment, Measurement of force, weight and pressure, Electronic tubes, Geology. Meteorology. Hydrology, Astronomy. Geodesy. Geography, Building accessories, Electric filters, Electronic components in general, Electromechanical components for electronic and telecommunications equipment, Resistors, Plastics, Graphical symbols, Nuclear energy engineering, Construction technology, Non-destructive testing, Occupational safety. Industrial hygiene, Equipment for the chemical industry, Power stations in general, Switchgear and controlgear, Shipbuilding and marine structures in general, Pipeline components and pipelines, Heat pumps, Installations in buildings, Valves, Linear and angular measurements, Fibre optic communications, Compressors and pneumatic machines, Integrated circuits. Microelectronics, Applications of information technology, Metrology and measurement in general, Thermodynamics and temperature measurements, Lubrication systems, Milk and milk products, Air quality, Protection against fire, Internal combustion engines for road vehicles, Gas and steam turbines. Steam engines, Plant and equipment for the food industry, Analytical chemistry, Diagnostic, maintenance and test equipment, Optical equipment, Shafts and couplings, Railway rolling stock, Radiocommunications, Electrical and electronic testing, Electrical engineering in general, Welding, brazing and soldering, Refrigerating technology, Road vehicle systems, Telecommunications in general, Electromagnetic compatibility (EMC), Energy and heat transfer engineering in general, On-board equipment and instruments, Aerospace fluid systems and components, Ergonomics, Industrial automation systems.

Professional Standard - Machinery, Hot pressing instrument parameters

JB/T 7440-1994 Die-casting technique parameter tester
JB/T 10574-2006 Optical length measuring instruments - Basic parameters
JB/T 9399-1999 Main parameter series for the X-ray analytical instrumentation
JB/T 9399-2010 Main parameter series for the X-ray analytical instrumentation
JB/T 10574-2013 Basic parameters of optical length measuring instruments
JB/T 8127.1-1995 Series parameters for fuel fired heaters
JB/T 9330-1999 The basic parameter for diaphragm plate of optical instrument
JB/T 6309.1-2013 Hot chamber die casting machine.Part 1:Basic parameters
JB/T 8387-2010 Non-destructive testing instruments.Main parameter for the industrial detection X-ray tube
JB/T 5921-2006 Hydraulic fluid power Basic parameters of the cooler
JB/T 5921-1991 Basic parameters of coolers for hydraulic systems
JB/T 4740-1997 Type and basic parameters of air cooled heat exchanger
JB/T 4717-1992 Type and basic parameter of U tube heat exchanger
JB/T 8506-2006 Specification and technical requirements for yellow-phosphorus furnace transformers
JB/T 6303-1992 Calcium carbide furnace transformer technical parameters and requirements
JB/T 8506-1996 Yellow phosphorus furnace transformer technical parameters and requirements
JB/T 6303-2004 Specification and technical requirements for calcium carbide furnace transformers
JB/T 4714-1992 Type and basic parameter of floating heat exchanger and condenser
JB/T 4715-1992 Type and basic parameter of fixed tube-sheet heat exchanger
JB/T 11183.1-2011 Dense muscle-type heat exchanger.Part 1: Basic parameters
JB/T 7808-2010 Non-destructive testing instruments Main parameter series for the industrial X-ray equipment
JB/T 4716-1992 Type and basic parameter of vertical thermo-syphon reboiler
JB/T 4722-1992 Basic parameter and specification for threaded heat exchanger tube of tubular heat exchanger
JB/T 9477.3-1999 Directly heated voltage - stabilizing type negative temperature coefficient thermistors
JB/T 4723-1992 Type and basic parameter for non-detachable spiral heat exchanger
JB/T 10780-2007 Specification and technical requirements for 750kV oil-immersed power transformers
JB/T 10592-2006 Tractor diesel engines.Cooling water radiators.Types, parameters and connecting dimensions
JB/T 11160.1-2011 Heat exchangers.Part 1: Types and basic parameters
JB/T 10317-2002 Specification and technical requirements for single-phase oil-immersed distibution transformers
JB/T 10317-2014 Specification and technical requirements for single-phase oil-immersed distribution transformers
JB/T 3857-1999 Type and basic data of horizontal winding machine for transformer
JB/T 6406.1-1992 Electrohydraulic block brake type, basic parameters and dimensions
JB/T 2426-2004 Specification and technical requirements for three-phase station service transformers
JB/T 10318-2002 Specification and technical requirements for oil-immersed amorphous alloy core distribution transformers
JB/T 2426-1992 Technical parameters and requirements of self-use three-phase transformers in power plants and substations

Professional Standard - Construction Industry, Hot pressing instrument parameters

JG/T 329-2011 Apparantus of concrete thermal coefficient

Guangdong Provincial Standard of the People's Republic of China, Hot pressing instrument parameters

DB44/T 1929-2016 parametric regulator

British Standards Institution (BSI), Hot pressing instrument parameters

BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN 61290-5-1:2006 Optical amplifiers - Test methods - Reflectance parameters - Optical spectrum analyzer method
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN 61290-2-3:1998 Optical fibre amplifiers - Basic specification - Test methods for optical power parameters - Optical power meter
BS EN 61083-1:2001 Digital recorders for measurements in high-voltage impulse tests. Requirements for instruments
BS EN 306:1997 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
BS EN IEC 61290-1-1:2020 Optical amplifiers. Test methods - Power and gain parameters. Optical spectrum analyzer method
BS EN 50379-2:2004 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Performance requirements for apparatus used in statutory inspections and assessment
BS EN 50379-2:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances. Performance requirements for apparatus used in statutory inspections and assessment
BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN 61290-3-2:2003 Optical fibre amplifiers - Basic specification - Test methods for noise figure parameters - Electrical spectrum analyzer method
BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1:Noise figure parameters - Optical spectrum analyzer method
BS EN 61290-3-1:2004 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Optical spectrum analyzer method
BS ISO 11614:1999 Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
BS ISO 10109-1:1994 Optics and optical instruments - Environmental requirements - General information, definitions, climatic zones and their parameters
BS EN 61290-10-2:2009 Optical amplifiers. Test methods. Multichannel parameters. Pulse method using a gated optical spectrum analyzer
BS EN 61290-10-2:2008 Optical amplifiers – Test methods — Part 10-2: Multichannel parameters – Pulse method using a gated optical spectrum analyzer
BS ISO 9022-18:1995 Optics and optical instruments. Environmental test methods. Combined damp heat and low internal pressure
BS EN ISO 14577-4:2016 Tracked Changes. Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN 61083-2:2006 Digital recorders for measurements in high-voltage impulse tests - Evaluation of software used for the determination of the parameters of impulse waveforms
BS EN 61083-2:1997 Digital recorders for measurements in high-voltage impulse tests - Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms
BS EN 61290-5-2:2004 Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Electrical spectrum analyser method
BS ISO 15471:2005 Surface chemical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters
BS ISO 10109-1:2006 Optics and photonics - Environmental requirements - General overview, terms and definitions, climatic zones and their parameters
BS EN 61290-10-2:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using a gated optical spectrum analyzer
BS ISO 15470:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
BS ISO 15470:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
BS ISO 15471:2016 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy. Description of selected instrumental performance parameters
BS EN ISO 14577-2:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN 61290-1-1:2006 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
BS EN 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
BS EN 61290-1-1:2015 Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyzer method
BS EN 61290-1-2:2007 Optical amplifiers. Test methods. Power and gain parameters. Electrical spectrum analyzer method
BS EN 61290-1-1:2007 Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyzer method

Professional Standard - Water Conservancy, Hot pressing instrument parameters

SL 136-2017 Calibration method of concrete thermal parameter tester

水利部, Hot pressing instrument parameters

SL/T 136-2017 Calibration method of concrete thermal parameter measuring instrument

Indonesia Standards, Hot pressing instrument parameters

SNI 05-6047.2-1999 Heat exchangers - Method for parameter measurement for performance determination. Part 2: Fluid pressure
SNI 05-6047.3-1999 Heat exchanger - Method for parameter measurement for performance determination. Part 3: Fluid flow velocity
SNI 05-6047.1-1999 Heat exchanger - Method for parameter measurement for performance determination. Part 1: Temperature and fluid quality

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Hot pressing instrument parameters

GB/T 3720-1988 Optical length measuring instruments--Basic parameters
GB/T 15966-2007 Primary parameter and general specification for hydrologic instrument
GB/T 15966-1995 Primary parameter and general specification for hydrologic instrument
GB/T 15406-1994 Primary parameters and general technical specifications for geotechnical apparatus
GB/T 15406-2007 Primary parameter and general specification for geotechnical engineering instrument
GB/T 21838.1-2008 Metallic materials.Instrumented indentation test for hardness and materials parameters.Part 1:Test method
GB/T 28712.6-2023 Heat exchanger types and basic parameters Part 6: Air-cooled heat exchangers
GB/T 28712.4-2023 Heat Exchanger Types and Basic Parameters Part 4: Thermosyphon Reboiler
GB/T 28712.6-2012 Types and basic parameters of heat exchangers.Part 6:Air cooled heat exchangers
GB/T 28712.1-2023 Heat exchanger types and basic parameters Part 1: Floating head heat exchanger
GB/T 28712.1-2012 Types and basic parameters of heat exchangers.Part 1:Floating heat exchangers
GB/T 10228-1997 Specification and technical requirements for dry-type power transformers
GB/T 10228-2008 Specification and technical requirements for dry-type power transformers
GB/T 10228-2015 Specification and technical requirements for dry-type power transformers
GB/T 10228-2023 Technical parameters and requirements for dry-type power transformers
GB/T 28712.5-2023 Heat exchanger types and basic parameters Part 5: Spiral plate heat exchangers
GB/T 28712.5-2012 Types and basic parameters of heat exchangers.Part 5:Spiral heat exchangers
GB/T 28712.3-2023 Heat exchanger types and basic parameters Part 3: U-shaped tube heat exchanger
GB/T 28712.3-2012 Types and basic parameters of heat exchangers.Part 3:U-tube heat exchangers
GB/T 22067.3-2008 Instrumented indentation tests for hardness and material parameters of metallic materials - Part 3: Calibration of standard blocks
GB/T 21838.3-2022 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 3:Calibration of reference blocks
GB/T 21838.3-2008 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:calibration of reference blocks
GB/T 28712.4-2012 Types and basic parameters of heat exchangers.Part 4:Vertical thermo siphon reboilers
GB/T 28712.2-2023 Heat exchanger types and basic parameters Part 2: Fixed tube plate heat exchanger
GB/T 28712.2-2012 Types and basic parameters of heat exchangers.Part 2:Fixed tube sheet heat exchangers
GB/T 6451-2008 Specification and technical requirements for oil-immersed power transformers
GB/T 10893.2-2006 Compressed air dryers.Part 2: Performance ratings
GB/T 6451-2015 Oil-immersed power transformer technical parameters and requirements
GB/T 6451-2023 Technical parameters and requirements of oil-immersed power transformers
GB/T 25289-2010 Specification and technical requirements for 20kV oil-immersed distribution transformers
GB/T 22067.2-2008 Instrumented indentation tests for hardness and material parameters of metallic materials - Part 2: Inspection and calibration of testing machines
GB/T 21838.2-2022 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 2: Verification and calibration of testing machines
GB/T 21838.2-2008 Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2: Verification and calibration of testing machines
GB/T 6574-1986 Types and dimensions and installation parameters of cooling water radiators for tractor diesel engines
GB/T 16492-1996 Optics and optical instruments--Environmental requirements. General information, definitions, climatic zones and their parameters
GB/T 6451-1999 Specification and technical requirements for three-phase oil-immersed power transformers
GB/T 6451-1999(XG1-2002) Specification and technical requirements for three-phase oil immersed power transformers
GB/T 16274-1996 Specification and technical requirements for oil immersed power transformers 500KV
GB/T 6451-1995 Specification and technical requirements for three-phase oil immersed power transformers
GB/T 20838-2007 Specification and technical requirements of oil-immersed convertor transformers for HVDC applications
GB/T 25187-2010 Surface chemical analysis.Auger electron spectroscopy.Description of selected instrumental performance parameters
GB/T 28892-2012 Surface chemical analysis.X-ray photoelectron spectroscopy.Description of seleted instrumental performance parameters
GB/T 22072-2008 Dry-type amorphous alloy core distribution transformer technical parameters and requirements
GB/T 21838.4-2008 Metallic materials.Instrumented indentation test for hardness and materials Parameters.Part 4:Test method for metallic and non-metallic coatings
GB/T 32825-2016 Specification and technical requirements for three-phase dry-type tridimensional wound-core distribution transformers
GB/T 25082-2010 Specification and technical requirements of oil-immersed convertor transformers for 800 kV DC applications
GB/T 25446-2010 Specification and technical requirements for oil-immersed amorphous alloy core distribution transformers
GB/T 20837-2007 Specification and technical requirements of oil-immersed smoothing reators for HVDC applications
GB/T 25438-2010 Specification and technical requirments for three-phase oil-immersed tridimensional toroidal-core distribution stransformers

International Organization for Standardization (ISO), Hot pressing instrument parameters

ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO/CD 14577-1:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
ISO/DTS 19096 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO/TS 19096:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO 5151:1994 Non-ducted air conditioners and heat pumps - Testing and rating for performance
ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
ISO/CD 14577-2:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
ISO 1878:1974 Title missing - Legacy paper document
ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
ISO 11614:1999 Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
ISO 15470:2017 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
ISO/TR 14696:1999 Reaction to fire tests - Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 15471:2004 Surface chemical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters
ISO 15471:2016 Surface chemical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters
ISO 15470:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
ISO 10109-1:1994 Optics and optical instruments - Environmental requirements - Part 1: General information, definitions, climatic zones and their parameters

YU-JUS, Hot pressing instrument parameters

JUS M.A1.032-1980 Classification of imtruments and devices for measurement and evaluation of the geometrical parameters of surface finish
JUS M.E2.952-1996 Electrical water heaters-Storage water heaters with rated capacity up to 1 000 liters-Performance characteristics,requirments and tests

RO-ASRO, Hot pressing instrument parameters

STAS 10995-1977 Working machines and equipments for plastics ADIABATIG EXTRUDING MACHINES Main parameters
STAS 10610/1-1976 Ship's equipment FUEL AND OIL TUBE BUNDLE HEATERS Types and main parameters
STAS 8743-1978 Motor vehicles and trailers PNEUMATIC BRAKE CYLINDRES Principal parameters
STAS 11051/4-1989 SUSPENDED SPOT WELDING iMACHINES WITH INCORPORATED TRANSFORMER Basic parameters-
STAS 9816-1980 Hydraulic and pneumatic drives BASIC PARAMETERS Terminology and symbols
STAS 9593-1974 Petroleum equipment HYDRAULIC BRAKESBasic parameters and connection sizes
STAS 11635/2-1987 Equipment for useful mineral substances preparation HYDRAULIC CLASSIFIERS Main parameters
STAS 11915-1988 Speed redwcers CYLINDRICAL GEAR REDUCERS FOR LIFTING AND TRANSPORT EQUIPMENT Main parameters
STAS 11048-1978 LINEAR INTEGRATED CIRCUITS Prescriptions for measuring for parametersof continuous voltage regulators
STAS 11707-1980 Traction rolling stock HYDRAULIC TRANSMISSIONS WITHOUT REDUCTOR Main parameters
STAS 11785-1980 Lines for heat treatment ELECTRIC CONTINUE LINE WITH CONVEYOR FOR IMPROVEMENT- NORMALIZING Main parametres

Professional Standard - Petroleum, Hot pressing instrument parameters

SY/T 5377-2013 Specifications for drilling fluid testing instruments
SY 5377-2013 Technical conditions of drilling fluid parameter testing equipment

RU-GOST R, Hot pressing instrument parameters

GOST 14064-1968 Hydraulic accumulators. Basic parameters
GOST 21712-1983 Piezoelectric resonators. Main characteristics
GOST 25851-1983 Radiometric instruments. Methods of main parameters measurement
GOST 10458-1981 Transformers for induction electrothermal installations for frequency from 500 to 10000Hz. Basic parameters
GOST 25678-1983 Instruments for measurements of pulse laser energy. Types. Basic parameters. Methods for measurement of basic parameters
GOST 20271.1-1991 Microwave electronic devices. Methods of measuring electrical parameters
GOST 21107.1-1975 Gas discharge devices. Methods of measurement of electrical parameters of stabilizing tube
GOST 21281-1982 Piezoelectric filters. Main parameters
GOST 23873-1979 Transformers multifunctional electronic and magnetic. Basic parameters
GOST 28953-1991 Photosensitive charge transfer device. Measuring methods for parameters
GOST 14213-1989 Logging cable tips, sonde heads and logging tools heads. Types, main parameters, dimensions and technical requirements
GOST 25450-1982 Surface regenerative heaters. Types, basic parameters and dimensions
GOST 20271.3-1991 Microwave electronic devices. Methods of measuring of modulating impulse parameters
GOST 15518-1987 Plate heat exchanges. Types, parameters and basic dimensions
GOST 20962-1975 Mean frequency static transducer for electrothermy. Basic parameters
GOST 6809-1987 Hot stamping crank presses. Basic parameters and dimensions. Norms of accuracy
GOST 25165-1982 Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements
GOST R 50355-1992 Digital instruments to measure immittance parameters. General technical requirements and methods of tests
GOST 12678-1980 Direct-acting pressure regulators. Main parameters
GOST 25449-1982 Water and steam heatexchangers. Types, basic parameters and sizes
GOST 10387-1981 Measuring machines for checking fine pitch spur gears. Types. Basic dimensions, standards of accuracy
GOST R 57395-2017 Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters
GOST 25164-1996 Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25164-1982 Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 14066-1968 Filters of hydraulic and lubricating systems. Ranges of basic parameters
GOST 5368-1981 Cylindrical gear checking machines. Types. Basic parameters. Accuracy limits
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST 11357-1989 Fine-modul bevel gear testers. Types and main specifications. Accuracy norms
GOST 16860-1988 Thermal deaerators. Types, basic parameters, acceptance, control methods
GOST R EN 306-2011 Heat exchangers. Methods of measuring the parameters necessary for establishing the performance
GOST 9459-1987 Gauges for bevel gears and gear pairs. Types. Basic parameters. Accuracy limits
GOST 28530-1990 Equipment for beet sugar production. Juice heat and heaters changers. Types, and basic parameters and dimensions
GOST 25312-1982 Measuring thermal thermoelectric laser radiation transducers. Types and basic parameters. Measuring methods
GOST 10767-1998 One position thermoplast and thermosetting plastic working automatic machines. Basic parameters and dimensions. Norms of accuracy
GOST 10767-1987 Automatic machines for thermoplastic and thermosofting materials. Parameters and dimensions. Norms of accuracy
GOST 3484.3-1988 Power transformers. Measuring methods of dielectric parameters of insulation
GOST 17596-1972 Low frequency matehing transformers with a power not exceeding 25 W. Basic parameters
GOST 18230-1972 Power supplies spectrometric semiconductor radiation detectors. Types and basic parameters
GOST 14151-1969 Hydrodynamic adjustable single supported couplings. Basic parameters and dimensions
GOST 26949-1986 Integrated microcircuits. Methods for measuring of electrical parameters of continuous voltage regulators
GOST R 54801-2011 Traction transformers and inductors on board railway rolling stock. Basic parameters and test methods
GOST 21107.2-1975 Gas discharge devices. Methods of measurement of electrical parameters of hot-cathode thyratrons and gas-filled rectifiers
GOST 14014-1991 Digital instruments and measuring transducers of voltage, current and resistance. General technical requirements and methods of tests
GOST 14014-1982 Digital instruments and measuring transducers of voltage, current and resistance. General specifications
GOST R 8.748-2011 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 1. Test method
GOST 11875-1988 General purpose rotary drum heat exchangers. Coolers. Basic parameters and dimensions
GOST 19104-1988 Low-frequency voltage up to 1500 V cylindrical connectors. Basic parameters and dimensions
GOST 20228-1974 Torque converters for commercial vehicles, buses and tractors. Basic parameters
GOST 29180-1991 Electromagnetic compatibility of technical means. HUF equipment. Low noise amplifires. Parameters and characteristics. Methods of measurements
GOST R 55603-2013 Heat recovery steam generators of combined cycle plants. Types and basic parameters
GOST 33324-2015 Traction transformers and inductors on board railway rolling stock. Basic parameters and test methods
GOST 22765-1989 Low-frequency pulse transformers and rectifier filter chokes. Methods of measuring electric parameters
GOST 30606-1998 Digital converters for voltage or current measuring. Basic parameters. General technical requirements. Methods of tests
GOST R 51747-2001 Microwave radio beacon instrument approach landing system for air vehicles. Main parameters and methods of measuring
GOST 19622-1991 Unidirectional restrictor valves of flying vehicle hydraulic systems. Types and technical requirements
GOST R 51503-1999 Devices for measurement of light technical characteristics of information display instruments. Types, basic parameters, general technical requirements
GOST 11102-1975 Acceptance and acting instruments and devices for diesel automation. Types, basic parameters and technical requirements
GOST 26114-1984 Non-destructive testing. Flow detection equipment on the basic of particle accelerators. Main parameters and general technical requirements

GOSTR, Hot pressing instrument parameters

GOST 18630-1973 Puise transformers. Basis parameters
GOST 9879-1976 Ship's power transformers. Basic parameters
GOST 24469-1980 Instruments for measurements laser radiation parameters. General technical requirements

国家能源局, Hot pressing instrument parameters

NB/T 10286-2019 Single-phase AC parameter voltage regulator
NB/T 10172-2019 Technical conditions of mining air compressor operating parameter tester
NB/T 42066-2016 Technical parameters and requirements for 6kV~35kV dry-type aluminum winding power transformers
NB/T 42067-2016 Technical parameters and requirements for 6kV~36kV oil-immersed aluminum winding distribution transformers

AT-ON, Hot pressing instrument parameters

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM ENV 306-1991 Heat exchangers — Methods of measuring the parameters necessary for establishing the performance
ONORM M 7300-1990 Calculatlon of boilers and pressure vessels; design parameters, permissible Stresses

VN-TCVN, Hot pressing instrument parameters

TCVN 2850-1979 Hot stamping crank presses.Basic parameters and dimensions
TCVN 2005-1977 Filters for hydraulic and lubricating systems.Basic parameters

International Electrotechnical Commission (IEC), Hot pressing instrument parameters

IEC 61869-9:2016 Instrument transformers - Part 9: Digital interface for instrument transformers
IEC 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters; Optical spectrum analyzer method
IEC 61290-3-2:2003 Optical amplifiers - Part 3-2: Test methods for noise figure parameters; Electrical spectrum analyzer method
IEC 61290-5-2:2003 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters; Electrical spectrum analyser method
IEC 61290-1-1:2020 RLV Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
IEC 61290-1-1:2020 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
IEC 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
IEC 61290-1-1:2006 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
IEC 61290-10-2:2003 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters; Pulse method using a gated optical spectrum analyzer

CZ-CSN, Hot pressing instrument parameters

CSN 35 6535-1983 Electronic measuring instruments. Succesive process spectra analyzers. Nomenclature of pnrameters
CSN ON 27 1989-1968
CSN 08 1161-1990 Heaters, surface, regenerative. Types. Fundamental parameters
CSN 35 8850 Cast.1-1984 Semiconductor radiators. Main parameters of measuring methods
CSN 35 1090-1987 Power transformers.Methods of measuring the dielectric parameters of insulation
CSN 25 2300-1972 Classification of instruments and devices or measurement of the geometrical arameters of surface finish
CSN 07 0610-1983 Heat axchangers. Water-water, steam-water. Types and basic parameters
CSN 85 2104 Zb-1987
CSN 36 6150-1987 Telegraph apparatus wiih 5 element code. Basic parameters, lechnica! requirements and lesting methods
CSN 35 1121-1988 Three phase oil power trnasformers 100 to 1600 kV . A, to 22 kV. Technica] requirements and basic parametres

German Institute for Standardization, Hot pressing instrument parameters

DIN EN ISO 14577-3:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN 16086:2006-01 Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
DIN 16086:2006 Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN 306:1997 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance; German version EN 306:1997
DIN 2271-3:2000 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing
DIN 43751-4:1990-06 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details / Note: Applies in conjunction with DIN 43751-1 (1987-05).
DIN EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002); German version EN ISO 14577-2:2002
DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
DIN EN 306:1997-07 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance; German version EN 306:1997
DIN EN ISO 14577-2:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015); German version EN ISO 14577-2:2015
DIN EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method (IEC 61290-3-1:2003); German version EN 61290-3-1:2003
DIN EN 61290-3-1:2004-05 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method (IEC 61290-3-1:2003); German version EN 61290-3-1:2003
DIN EN 61290-3-2:2009-06 Optical amplifier - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method (IEC 61290-3-2:2008); German version EN 61290-3-2:2008 / Note: DIN EN 61290-3-2 (2003-08) remains valid alongside this standard until 2011-10-01....
DIN ISO 15632:2022-09 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA) (ISO 15632:2...
DIN EN 61290-5-1:2007 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006); German version EN 61290-5-1:2006
DIN EN ISO 14577-4:2017-04 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016
DIN EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method (IEC 61290-5-2:2003); German version EN 61290-5-2:2004
DIN EN 61290-5-1:2007-03 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006); German version EN 61290-5-1:2006 / Note: DIN EN 61290-5-1 (2001-06) remains valid alongside this standard until 2009-06-01.
DIN EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007); English version of DIN EN ISO 14577-4:2007-08
DIN EN 61290-1-1:2007 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method (IEC 61290-1-1:2006); German version EN 61290-1-1:2006
DIN EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN 61290-1-2:2006-07 Optical amplifier - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method (IEC 61290-1-2:2005); German version EN 61290-1-2:2005 / Note: DIN EN 61290-1-2 (1999-08) remains valid alongside this standard until 2008-10-0...
DIN 42600-2:1983 Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers U<(Index)m>=0,8 kV; main dimensions

ES-UNE, Hot pressing instrument parameters

UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
UNE-EN ISO 14577-1:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
UNE-EN ISO 14577-2:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)
UNE-EN 61290-3-1:2003 Optical amplifiers - Test methods -- Part 3-1: Noise figure parameters - Optical spectrum analyzer method (Endorsed by AENOR in April of 2004.)
UNE-EN 61290-3-2:2008 Optical amplifier test methods -- Part 3-2: Noise figure parameters - Electrical spectrum analyzer method (Endorsed by AENOR in February of 2009.)
UNE-EN 61290-5-2:2004 Optical amplifiers - Test methods -- Part 5-2: Reflectance parameters - Electrical spectrum analyser method (Endorsed by AENOR in September of 2004.)
UNE-EN IEC 61290-1-1:2020 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method (Endorsed by Asociación Española de Normalización in December of 2020.)
UNE-EN 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method (Endorsed by AENOR in August of 2015.)
UNE-EN 61290-1-2:2005 Optical amplifiers - Test methods -- Part 1-2: Power and gain parameters - Electrical spectrum analyzer method (Endorsed by AENOR in March of 2006.)

National Metrological Technical Specifications of the People's Republic of China, Hot pressing instrument parameters

JJF(建材) 164-2020 Calibration specification for on-site photothermal parameter measuring instrument for architectural glass
JJF(机械) 1070-2021 Calibration specification for zinc oxide surge arrester DC parameter tester
JJF(机械)1070-2021

European Committee for Standardization (CEN), Hot pressing instrument parameters

DD ENV 306-1990 Heat exchangers; methods of measuring the parameters necassary for establishing the performance
prEN ISO 14577-1 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
prEN ISO 14577-3 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
CWA 17552-2020 Engineering materials - Electronic data interchange - Instrumented indentation test data
CWA 17552:2020 Engineering materials - Electronic data interchange - Instrumented indentation test data
prEN ISO 14577-2 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
EN 306:1997 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
DD ENV 327-1990 Heat Exchangers - Test Procedures for Establishing Performance of Forced Convection Air Cooled Refrigerant Condensers
DD ENV 308-1991 Heat exchangers; test procedures for establishing performance of air to air and flue gases heat recovery devices

Group Standards of the People's Republic of China, Hot pressing instrument parameters

T/CECS 10101-2020 Multi-parameter indoor environment monitoring instrument for civil buildings
T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
T/CEEIA 299-2018 Specification and technical requirements for dry-type transformers for photovoltaic power applications

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Hot pressing instrument parameters

GB/T 15966-2017 Primary parameters and general technical conditions for hydrologic instruments

Professional Standard - Electron, Hot pressing instrument parameters

SJ 1887-1981 Major technical parameters for thermistors
SJ/T 11846-2022 Voltage regulator low-frequency noise parameter test method
SJ 1560-1980 Negative temperature coefficient thermistors used as voltage regulators for Type MF21 and MF22
SJ 1559-1980 Generic specification for negative temperature coefficient thermistors used as voltage regulators

Association of German Mechanical Engineers, Hot pressing instrument parameters

DVS 2205-1-1985 Mathematical calculation of containers and vessels of thermoplastic polymers; parameters
DVS 2207-4 Beiblatt 1-2006
DVS 2207-4 Beiblatt 1-2005
DVS 2207-4 Beiblatt 1-2003
DVS 2207-4 Beiblatt-1993 "Welding of thermoplastics - Extrusion welding - Panels and pipes, welding parameters for HDPE and PP"
DVS 2207-4 Beiblatt-1991
DVS 2207-4 Beiblatt 1-2013 "Welding of thermoplastics - Extrusion welding of pipes, piping parts and panels - Welding parameters"
DVS 2207-4 Beiblatt 1-2009 "Welding of thermoplastics - Extrusion welding of pipes, piping parts and panels - Welding parameters"

Professional Standard - Nuclear Industry, Hot pressing instrument parameters

EJ/T 1050-1997 Graphical symbols, writing abbreviations and parameter symbols for nuclear instruments
EJ/T 1050-2012 Graphical symbols, text codes and parameter symbols of nuclear instruments

National Metrological Verification Regulations of the People's Republic of China, Hot pressing instrument parameters

JJG(电子) 31012-2007 Verification Regulations for Integrated Operational Amplifier Parameter Tester
JJG(电子) 310002-2006 Specification for verification of DC parameter testers for semiconductor discrete devices
JJG(电子) 310003-2006 Specification for verification of capacitor parameter testers for semiconductor discrete devices

ZA-SANS, Hot pressing instrument parameters

SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks
SANS 14577-1:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 1: Test method
SANS 14577-2:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines
SANS 61290-5-1:2007 Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method

Korean Agency for Technology and Standards (KATS), Hot pressing instrument parameters

KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-3-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
KS B ISO 14577-3:2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS B ISO 14577-2:2004 Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS B ISO 14577-2-2004(2009) Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS B ISO 14577-2:2017 Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS C IEC 61290-3-1-2005(2020) Optical amplifiers－Test methods－Part 3－1：Noise figure parameters－Optical spectrum analyzer method
KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
KS C IEC 61290-3-1:2005 Optical amplifiers－Test methods－Part 3－1：Noise figure parameters－Optical spectrum analyzer method
KS C IEC 61290-5-1-2007(2022) Optical amplifiers－Test methods－Part 5－1：Reflectance parameters －Optical spectrum analyzer method
KS C IEC 61290-5-1-2007(2017) Optical amplifiers－Test methods－Part 5－1：Reflectance parameters －Optical spectrum analyzer method
KS D ISO 14577-4-2011(2021) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2011(2016) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 15471-2005(2020) Surface chemical analysis－Auger electron spectroscopy－Description of selected instrumental performance parameters
KS D ISO 15471:2005 Surface chemical analysis－Auger electron spectroscopy－Description of selected instrumental performance parameters
KS C IEC 61290-3-2-2005(2020) Optical amplifiers－Part 3－2：Test methods for noise figure parameters－Electrical spectrum analyzer method
KS C IEC 61083-2:2006 Digital recorders for measurements in high voltage impulse tests－Part 2：Evaluation of software used for the determination of the parameters of impulse waveforms
KS D ISO 15470:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
KS C IEC 61290-5-1:2007 Optical amplifiers-Test methods-Part 5-1:Reflectance parameters -Optical spectrum analyzer method
KS B ISO 10109-1-2002(2017) Optics and optical instruments－Environmental requirements－Part 1：General information, definitions, climatic zones and their parameters
KS C IEC 61290-10-2-2005(2020) Optical amplifiers－Test methods－Part 10－2：Multichannel parameters－Pulse method using a gated optical spectrum analyzer
KS B ISO 10109-1-2002(2022) Optics and optical instruments－Environmental requirements－Part 1：General information, definitions, climatic zones and their parameters
KS C IEC 60444-5:2016 Measurement of quartz crystal units parameters ― Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
KS B ISO 9022-18-2002(2022) Optics and optical instruments－Environmental test methods－Part 18：Combined damp heat and low internal pressure
KS B ISO 9022-18-2002(2017) Optics and optical instruments－Environmental test methods－Part 18：Combined damp heat and low internal pressure
KS B ISO 10109-1:2002 Optics and optical instruments-Environmental requirements-Part 1:General information, definitions, climatic zones and their parameters

工业和信息化部, Hot pressing instrument parameters

JB/T 13906.1-2020 Hot stamping high-speed hydraulic press Part 1: Type and basic parameters
JB/T 8506-2018 Yellow phosphorus furnace transformer technical parameters and requirements
JB/T 13778-2020 Positive temperature coefficient thermistor chip for compressor starter

国家市场监督管理总局、中国国家标准化管理委员会, Hot pressing instrument parameters

GB/T 21838.1-2019 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method
GB/T 22072-2018 Specifications and technical requirements for dry-type amorphous alloy core distribution transformers
GB/T 21838.4-2020 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings

Danish Standards Foundation, Hot pressing instrument parameters

DS/EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
DS/EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
DS/ENV 306:1991 Heat exchangers. Methods of measuring the parameters necessary for establishing the performance
DS/EN 306:1998 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
DS/EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
DS/ISO 14696:2009 Reaction-to-fire tests - Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
DS/EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
DS/ISO 1878:1989 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
DS/EN 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
DS/EN 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
DS/EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyzer method
DS/EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
DS/EN 61290-1-1:2007 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
DS/EN IEC 61290-1-1:2020 Optical amplifiers – Test methods – Part 1-1: Power and gain parameters – Optical spectrum analyzer method
DS/EN 61290-1-2:2006 Optical amplifiers - Test methods -- Part 1-2: Power and gain parameters - Electrical spectrum analyzer method

Association Francaise de Normalisation, Hot pressing instrument parameters

NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method
NF E38-322*NF EN 306:1997 Heat exchangers. Methods of measuring the parameters necessary for establishing the performance.
NF A03-155-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.
NF C93-805-1-2*NF EN 61290-1-2:2006 Optical amplifiers - Test methods - Part 1-2 : power and gain parameters - Electrical spectrum analyzer method.
NF A03-155-3*NF EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks
NF A03-155-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.
NF EN 306:1997 Échangeurs thermiques - Méthodes de mesurage des paramètres nécessaires à l'évaluation des performances
NF A03-155-2*NF EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines
NF C93-805-3-1*NF EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1 : noise figure parameters - Optical spectrum analyzer method
NF EN 61290-3-1:2004 Amplificateurs optiques - Méthodes d'essai - Partie 3-1 : paramètres du facteur de bruit - Méthode d'analyseur du spectre optique
NF EN 61290-3-2:2009 Amplificateurs optiques - Méthodes d'essais - Partie 3-2 : paramètres du facteur de bruit - Méthode de l'analyseur spectral électrique
NF A03-155-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines.
NF A03-155-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.
NF EN 60444-5:2001 Mesure des paramètres des résonateurs à quartz - Partie 5 : méthodes pour la détermination des paramètres électriques équivalents utilisant des analyseurs automatiques de réseaux et correction des erreurs
NF C23-595-2*NF EN 50379-2:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2 : performance requirements for apparatus used in statutory inspections and assessment
NF A03-155-4*NF EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings
NF C93-805-5-2*NF EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2 : reflectance parameters - Electrical spectrum analyser method
NF EN 61290-5-2:2004 Amplificateurs optiques - Méthodes d'essai - Partie 5-2 : paramètres du facteur de réflexion - Méthode de l'analyseur de spectre électrique
NF EN 61290-5-1:2006 Amplificateurs optiques - Méthodes d'essais - Partie 5-1 : paramètres de réflectance - Méthode d'analyseur de spectre optique
NF C41-108:1997 Digital recorders for measurements in high-voltage impulse tests. Part 2 : evaluation of software used for the determination of the parameters of impulse waveforms.
NF C93-805-1-1:2020 Optical amplifiers - Test methods - Part 1-1 : Power and gain parameters - Optical spectrum analyzer method
NF C93-805-1-1*NF EN 61290-1-1:2017 Optical amplifiers - Test methods - Part 1-1 : power and gain parameters - Optical spectrum analyzer method
NF EN IEC 61290-1-1:2020 Amplificateurs optiques - Méthodes d'essai - Partie 1-1 : paramètres de puissance et de gain - Méthode de l'analyseur de spectre optique
NF EN 60444-9:2014 Mesure des paramètres des résonateurs à quartz - Partie 9 : mesure des résonances parasites des résonateurs piézoélectriques
NF C93-805-1-1:2007 Optical amplifiers - Test methods - Part 1-1 : power and gain parameters - Optical spectrum analyzer method.
NF EN 61290-1-2:2006 Amplificateurs optiques - Méthodes d'essai - Partie 1-2 : paramètres de puissance et de gain - Méthode de l'analyseur de spectre électrique
NF C93-805-5-1:2001 Optical fibre amplifiers - Basic specification - Part 5-1 : test methods for reflectance parameters - Optical spectrum analyser.
NF C93-805-2-2*NF EN 61290-2-2:1998 Optical fibre amplifiers. Basic specification. Part 2-2 : test methods for optical power parameters. Electrical spectrum analyzer.

Lithuanian Standards Office , Hot pressing instrument parameters

LST EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002)
LST EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002)
LST EN 306-2001 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
LST EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002)
LST EN 61290-3-1-2004 Optical amplifiers. Test methods. Part 3-1: Noise figure parameters. Optical spectrum analyzer method (IEC 61290-3-1:2003)
LST EN 61290-3-2-2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method (IEC 61290-3-2:2008)
LST EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007)
LST EN 61290-5-1-2006 Optical amplifiers -Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006)

Professional Standard - Electricity, Hot pressing instrument parameters

DL/T 615-2013 Guide to the selections of characteristic quantities of HV AC circuit-breakers
DL/T 615-1997 Guide to the selection of characteristic quantities of HV AC circuit-breakers

Professional Standard-Ships, Hot pressing instrument parameters

CB 1190-1988 Longitudinal Vibration Piezoelectric Transducer Parameter Series

Professional Standard - Military and Civilian Products, Hot pressing instrument parameters

WJ 2240-1994 Parameter series of hydraulic pumps and motors for weapons

工业和信息化部/国家能源局, Hot pressing instrument parameters

JB/T 6303-2016 Technical parameters and requirements of calcium carbide furnace transformer
JB/T 2426-2016 Technical parameters and requirements for self-use three-phase transformers in power plants and substations

Military Standard of the People's Republic of China-General Armament Department, Hot pressing instrument parameters

GJB 8361-2015 Parameter testing method of military laser power energy testing instrument

IN-BIS, Hot pressing instrument parameters

IS 10732-1983

PL-PKN, Hot pressing instrument parameters

PN G03352-1972 Driliing geophysies Ends of heads ins?ruments intratelluric Principal parame?ers
PN M69240-1974 Pressure regulators for welding processes Principal parameters
PN G03359-1989 Apparatus for radioactivity logging Classification, essential parameters and genera? technical requirements
PN E04070-17-1986 Power transformers Test methods Determination of noise parameters
PN M73262-1966 Hydraulic drive and control equipment Filters Basic parametres
PN M55690-1987 Machines for plastic forming of metais Screw presses Principal parameters
PN M55750-1986 Machines for plastic forming of metals Screw presses Principal parameters
PN G02316-1991 Measuring meters for hydrogeology. Electrical water level meters with recorders. Types, principal parameters and technical requirements
PN G02317-1991 Measuring meters for hydrogeology. Mechanical water level meters with boosters. Types, principal parameters and technical requirements
PN M46595 ArkusZ2-1973 Pneumatic conveyers Devices for cleaning compressed air Basic parameters
PN A55547-1991 Plate heat exchangers for the food industry. Types, basic parameters dimensions and requirements
PN G32000-1992 Minings hydraulic drives and controls Staple — look couplings Basic parameters and dimensions

Japanese Industrial Standards Committee (JISC), Hot pressing instrument parameters

JIS B 7612-2:2008 Load Cells for Weighing Instruments -- Part 2: Digital Load Cells
JIS C 6122-3-2:2006 Optical amplifiers -- Test methods -- Part 3-2: Noise figure parameters -- Electrical spectrum analyzer method
JIS C 6122-3-1:2011 Optical amplifiers -- Test methods -- Part 3-1: Noise figure parameters -- Optical spectrum analyzer method
JIS K 0161:2010 Surface chemical analysis -- Auger electron spectroscopy -- Description of selected instrumental performance parameters
JIS K 0162:2010 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Description of selected instrumental performance parameters
JIS D 8005:2009 Road vehicles -- Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
JIS C 6122-1-2:2011 Optical amplifiers -- Test methods -- Part 1-2: Power and gain parameters -- Electrical spectrum analyzer method
JIS C 6122-1-1:2011 Optical amplifiers -- Test methods -- Part 1-1: Power and gain parameters -- Optical spectrum analyzer method

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Hot pressing instrument parameters

IEEE C62.69-2016 The Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment
IEEE C62.69A-2017 The Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment Amendment 1: Addition of Saturated Core Secondary Winding Parameters
IEEE 75-1958 Proposed Test Code for POWER-FACTOR TESTING OF MINERAL-OIL-INSULATED INSTRUMENT TRANSFORMERS
IEEE PC62.69/D4-2014 Draft Standard for the surge parameters of isolating transformers used in networking devices and equipment

SE-SIS, Hot pressing instrument parameters

SIS SS-ENV 306 E-1990 Heat exchangers — Methods of measuring the parameters necessary for establishing the performance
SIS SS-ENV 306-1990 Heat exchangers — Methods of measuring the parameters necessary for establishing the performance

BE-NBN, Hot pressing instrument parameters

NBN-ENV 306-1993 Heat exchangers. Methods of measuring the parameters necessary for establishing the performance

AENOR, Hot pressing instrument parameters

UNE-EN 306:1997 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
UNE 82302:1992 CLASSIFICATION OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH.
UNE-EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)

American Society for Testing and Materials (ASTM), Hot pressing instrument parameters

ASTM E2041-03 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2041-99 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2041-01 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2041-13e1 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method

Professional Standard - Railway, Hot pressing instrument parameters

TB/T 1671-1985 Basic dimensions and parameters of hydraulic shock absorbers for rolling stock
TB/T 2887-1998 Technical parameters and requirements of 27.5kV oil-immersed power transformer for railway

未注明发布机构, Hot pressing instrument parameters

BS EN 61290-3-1:2003(2004) Optical amplifiers — Test methods — Part 3 - 1 : Noise figure parameters — Optical spectrum analyzer method

TR-TSE, Hot pressing instrument parameters

TS 2216-1976 CLASSIFICAITON OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH

Professional Standard - Energy, Hot pressing instrument parameters

NB/T 31062-2014 Specification and technical requirements of dry-type transformers for wind turbine applications
NB/T 42020-2013 Specification and technical requirements for 750kV and 1000kV oil-immersed power transformers

CENELEC - European Committee for Electrotechnical Standardization, Hot pressing instrument parameters

EN 61290-3-2:2003 Optical amplifiers Part 3-2: Test methods for noise figure parameters Electrical spectrum analyzer method
EN 61083-2:1997 Digital recorders for measurements in high-voltage impulse tests Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms
EN 61290-5-1:2000 Optical Fibre Amplifiers - Basic Specification - Part 5-1: Test Methods for Reflectance Parameters - Optical Spectrum Analyser
EN 61290-1-1:1998 Optical Fibre Amplifiers - Basic Specification Part 1-1: Test Methods for Gain Parameters Optical Spectrum Analyzer
EN 61290-1-2:1998 Optical Fibre Amplifiers - Basic Specification Part 1-2: Test Methods for Gain Parameters Electrical Spectrum Analyzer
EN 61290-2-1:1998 Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters Optical Spectrum Analyzer

European Committee for Electrotechnical Standardization（CENELEC）, Hot pressing instrument parameters

EN 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
EN 60444-5:1997 Measurement of Quartz Crystal Unit Parameters Part 5: Methods for the Determination of Equivalent Electrical Parameters Using Automatic Network Analyzer Techniques and Error Correction
EN 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
EN IEC 61290-1-1:2020 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
EN 61290-3-1:2003 Optical amplifiers Test methods Part 3-1: Noise figure parameters Optical spectrum analyzer method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Hot pressing instrument parameters

ASHRAE 4304-1999 Parameter Estimation and the Use of Catalog Data in Modeling Heat Exchangers and Coils (The Full Test of This Paper Can be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 5@ Number 1@ January
ASHRAE 4389-2000 Parametric Analysis and Development of a Design Tool for Foundation Heat Gain for Coolers (RP-953)

Society of Automotive Engineers (SAE), Hot pressing instrument parameters

SAE J2333-2004 Ship Systems and Equipment Hydraulic Systems Filter Selection Parameters
SAE J2333-2013 Ship Systems and Equipment Hydraulic Systems Filter Selection Parameters
SAE J2333-1998 Ship Systems and Equipment - Hydraulic Systems - Filter Selection Parameters

PT-IPQ, Hot pressing instrument parameters

NP 3124-1985

Professional Standard - Coal, Hot pressing instrument parameters

MT/T 311-1992 Oil Filter Type and Basic Parameters of Shearer Traction Hydraulic System

Institute of Electrical and Electronics Engineers (IEEE), Hot pressing instrument parameters

IEEE PC57.162/D7, September 2022 IEEE Draft Guide for the Interpretation of Moisture Related Parameters in Liquid Immersed Transformers and Reactors
IEEE PC57.162 IEEE Draft Guide for the Interpretation of Moisture Related Parameters in Liquid Immersed Transformers and Reactors
IEEE Std C62.69-2016 IEEE Standard for the Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment

Professional Standard - Earthquake, Hot pressing instrument parameters

DB/T 21-2007 Technical requirements of instruments in network for earthquake monitoring.The description of common technical parmneter and test method

Defense Logistics Agency, Hot pressing instrument parameters

DLA QPL-5790-19 NOTICE 1-2008 Transmitter, Pressure, Oil, Synchro, 0-200 PSI 320-Degree Movement, 26V, Single Phase, 400 Cycles

International Telecommunication Union (ITU), Hot pressing instrument parameters

ITU-T K.95-2014 Surge parameters of isolating transformers used in telecommunication devices and equipment
ITU-T K.102-2014 Parameters of fixed-voltage thyristor overvoltage protector components used for the protection of telecommunication installations

Standard Association of Australia （SAA）, Hot pressing instrument parameters

AS ISO 15470:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters

机械工业部, Hot pressing instrument parameters

JB 2426-1992 Technical parameters and requirements for self-use three-phase transformers in power plants and substations

ESDU - Engineering Sciences Data Unit, Hot pressing instrument parameters

ESDU 83038 A-1984 Baffled shell-and-tube heat exchangers; flow distribution@ pressure drop and heat transfer coefficient on the shellside.

ES-AENOR, Hot pressing instrument parameters

Hebei Provincial Standard of the People's Republic of China, Hot pressing instrument parameters

DB13/T 2201-2015 Three-phase oil-immersed three-dimensional wound core power transformer technical parameters and requirements

American National Standards Institute （ANSI), Hot pressing instrument parameters

ANSI/TIA/EIA 455-221-2001 Optical Fiber Amplifiers - Basic Specification - Part 5 -1: Test Method for Reflectance Parameters - Optical Spectrum Analyzer