ZH
RU
ES
Grain Size and Size
Grain Size and Size, Total:99 items.
In the international standard classification, Grain Size and Size involves: Coals, Testing of metals, Non-ferrous metals, Ferrous metals, Cutting tools, Particle size analysis. Sieving, Products of non-ferrous metals, Iron and steel products, Powder metallurgy, Products of the chemical industry, Surface treatment and coating, Analytical chemistry, Audio, video and audiovisual engineering, Hand-held tools, Agricultural machines, implements and equipment, Ceramics, Fuels, Metalliferous minerals.
(U.S.) Ford Automotive Standards, Grain Size and Size
- FORD WSS-M2A177-A2-2014 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, SEAMLESS, HIGH STRENGTH, GRAIN SIZE CONTROLLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A177-A1)
- FORD WSS-M2A177-A2-2012 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, SEAMLESS, HIGH STRENGTH, GRAIN SIZE CONTROLLED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A177-A1
- FORD WSS-M2A177-A4-2014 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, SEAMLESS, MODERATE STRENGTH AND FORMABILITY, GRAIN SIZE CONTROLLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A177-A1)
- FORD WSS-M2A177-A4-2012 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, SEAMLESS, MODERATE STRENGTH AND FORMABILITY, GRAIN SIZE CONTROLLED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A177-A1
HU-MSZT, Grain Size and Size
Professional Standard - Ferrous Metallurgy, Grain Size and Size
- YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface
IN-BIS, Grain Size and Size
Indonesia Standards, Grain Size and Size
- SNI 13-4702-1998 Determination of grain size of coal by sieving equipment
- SNI 15-1150-1989 Sizes and tolerances of length and width of emery cloth sheet and roll type
- SNI 05-3815-1995 Dimension and limit of test value for pinch pliers and combination pliers
International Organization for Standardization (ISO), Grain Size and Size
- ISO/DIS 643:2023 Steels — Micrographic determination of the apparent grain size
- ISO 13067:2020 Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size
- ISO 13383-1:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution
German Institute for Standardization, Grain Size and Size
- DIN EN ISO 643:2020-06 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03); German version EN ISO 643:2020
- DIN EN ISO 643:2023-08 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 643 (2020-06).
- DIN EN ISO 2624:1995-08 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990); German version EN ISO 2624:1995
- DIN EN ISO 643:2017 Steel - Micrographic determination of the apparent grain size (ISO/DIS 643:2017); German and English version prEN ISO 643:2017
- DIN EN 16090:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
- DIN EN 15181/A1:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
- DIN EN 16247-4:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
- DIN ISO 13067:2021-08 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
- DIN ISO 13067:2021 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
British Standards Institution (BSI), Grain Size and Size
- BS EN ISO 643:2020 Steels. Micrographic determination of the apparent grain size
- 17/30363662 DC BS EN ISO 643 Steels. Micrographic determination of the apparent grain size
- BS EN 16090:2019 Copper and copper alloys. Estimation of average grain size by ultrasound
- BS EN 16090:2011 Copper and copper alloys. Estimation of average grain size by ultrasound
- BS ISO 13067:2020 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
- BS EN ISO 4499-2:2020 Hardmetals. Metallographic determination of microstructure - Measurement of WC grain size
- 19/30385570 DC BS EN 16090. Copper and copper alloys. Estimation of average grain size by ultrasound
- BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
- BS EN ISO 4499-2:2010 Hardmetals. Metallographic determination of microstructure. Measurement of WC grain size
- BS EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution
- BS EN 15415-1:2011 Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles
- 19/30365236 DC BS ISO 13067. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
Korean Agency for Technology and Standards (KATS), Grain Size and Size
RO-ASRO, Grain Size and Size
- STAS SR ISO 2624:1990 Copper and copper alloys. Estimation of average grain size
- STAS 9162-1973 NON-METAL BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of grain size
RU-GOST R, Grain Size and Size
- GOST 21073.0-1975 Non-ferrous metals. Determination of grain size. General requirements
- GOST R ISO 14250-2013 Steel. Metallographic characterization of duplex grain size and distribution
- GOST R 53205-2008 Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements
- GOST 25734-1996 Alumina. Method for crystallooptic determination of monograins sizes in non-metallurgic alumina
Danish Standards Foundation, Grain Size and Size
AENOR, Grain Size and Size
- UNE 37230:1986 LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
- UNE-EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound
- UNE-EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
Association Francaise de Normalisation, Grain Size and Size
- NF A04-102*NF EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size
- NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
- NF A51-130*NF EN 16090:2019 Copper and copper alloys - Estimation of average grain size by ultrasound
- NF EN 16090:2019 Cuivre et alliages de cuivre - Estimation de la taille moyenne de grain par ultrasons
- NF B41-204-1*NF EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1 : Determination of grain size and size distribution
- NF EN ISO 13383-1:2016 Céramiques techniques - Caractérisation microstructurale - Partie 1 : Détermination de la taille et de la distribution des grains
- NF E75-230*NF ISO 8486-1:1996 Bonded abrasives. Determination and designation of grain size distribution. Part 1 : macrogrits F4 to F220.
ES-UNE, Grain Size and Size
- UNE 37230:1987 ERRATUM LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
- UNE-EN 16090:2020 Copper and copper alloys - Estimation of average grain size by ultrasound
- UNE-EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
American Society for Testing and Materials (ASTM), Grain Size and Size
- ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM E1181-02(2023) Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM E1181-02(2015) Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
- ASTM B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
- ASTM B390-92(1996)e1 Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
- ASTM B390-92(2000) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
- ASTM E2627-13(2019) Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Grain Size and Size
- GB/T 24177-2009 Standard test methods for characterizing duplex grain sizes
- GB/T 31568-2015 Standard test method for determination of crystallite size of ZrO<下标2> coatings by Scherrer equation
- GB/T 38532-2020 Microbeam analysis—Electron backscatter diffraction—Measurement of average grain size
CZ-CSN, Grain Size and Size
- CSN 42 0464-1962 Methods for estimating the average grain size of non — ferrous metals
- CSN 42 0462-1983 Metal testing. Methods for estimating the average grain size of steel and non-ferrous metals
- CSN 42 0463-1984 Steel. Method for estimating the grain size of austenite on fractures
- CSN 65 4812-1969 Determination of size and mechanical strength of granules in fertilizers
European Committee for Standardization (CEN), Grain Size and Size
- EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
- EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size
- EN 16090:2011 Copper and copper alloys - Estimation of average grain size by ultrasound
GM North America, Grain Size and Size
- GM GM9613P-1994 Zinc Phosphate Crystal Size Determination Using "Faxfilm" Replication
Lithuanian Standards Office , Grain Size and Size
- LST EN 16090-2012 Copper and copper alloys - Estimation of average grain size by ultrasound
- LST EN ISO 2624:2000 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
- LST EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
CEN - European Committee for Standardization, Grain Size and Size
- PREN 16090-2019 Copper and copper alloys - Estimation of average grain size by ultrasound
IT-UNI, Grain Size and Size
Japanese Industrial Standards Committee (JISC), Grain Size and Size
SAE - SAE International, Grain Size and Size
- SAE AMS2316A-1991 METALLOGRAPHIC EVALUATION OF GRAIN SIZE IN WROUGHT NICKEL AND HEAT RESISTANT ALLOYS
Society of Automotive Engineers (SAE), Grain Size and Size
- SAE AMS2316-1989 METALLOGRAPHIC EVALUATION OF GRAIN SIZE IN WROUGHT NICKEL AND HEAT RESISTANT ALLOYS
Group Standards of the People's Republic of China, Grain Size and Size
- T/CSTM 00799-2023 Determination of grain size in steel—High temperature laser scanning confocal microscope method
- T/CVIA 43-2015 Specifications for appearance and installation dimensions of LCD TV screen T-CON board
Professional Standard - Machinery, Grain Size and Size
未注明发布机构, Grain Size and Size