ZH
RU
ES

Insulator rated voltage and working voltage

Insulator rated voltage and working voltage, Total:203 items.

In the international standard classification, Insulator rated voltage and working voltage involves: Electrical wires and cables, Insulation, Power transmission and distribution networks, Electrical accessories, Switchgear and controlgear, Electric traction equipment, Protection against electric shock, Vocabularies, Insulating materials.


Indonesia Standards, Insulator rated voltage and working voltage

  • SNI 04-6271-2000 Test methods for power cables with extruded insulation for rated voltage above 30 kV (Um=36 kV) up to 150 kV (Um=170 kV)
  • SNI 04-1910-1990
  • SNI 04-7022.1-2005 Insulators for overhead lines with a nominal voltage above 1000 V. Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
  • SNI IEC 61211:2009 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture testing in air

German Institute for Standardization, Insulator rated voltage and working voltage

  • DIN 48150:1966-12 Pin type insulators N; rated voltage below 1 kV
  • DIN 48004:1969-09 Insulators for overhead power lines; pin type insulators St, rated voltages 10 to 30 kV
  • DIN 48150:1966 Pin type insulators N; rated voltage below 1 kV
  • DIN 48004:1969 Insulators for overhead power lines; pin type insulators St, rated voltages 10 to 30 kV
  • DIN 48156:1959 Power current overhead lines; egg-shaped insulator E, rated voltage below 1 kV
  • DIN 48152:1958 Power current overhead lines; tension insulator Z, rated voltage below 1 kV
  • DIN 48152:1958-03 Power current overhead lines; tension insulator Z, rated voltage below 1 kV
  • DIN 48156:1959-01 Power current overhead lines; egg-shaped insulator E, rated voltage below 1 kV
  • DIN EN 60305:1996 Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type (IEC 60305:1995); German version EN 60305:1996
  • DIN EN 62155:2004 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V (IEC 62155:2003, modified); German version EN 62155:2003
  • DIN VDE 0281-9:2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for installation at low temperatures; German version HD 21.9 S2:1995 + A1:1999
  • DIN IEC 60273:1993 Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V (IEC 60273:1990); German version HD 578 S1:1992
  • DIN EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V - Definitions, test methods, acceptance criteria and design recommendations (IEC 61462:2007); German version EN 6
  • DIN 43167-3:1987 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c; insulator
  • DIN EN 61325:1996 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria (IEC 61325:1995); German version EN 61325:1995
  • DIN 43167-3:1987-12 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c; insulator
  • DIN 43167-1:1987 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; assembly
  • DIN EN 60168:2001 Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 kV (IEC 60168:1994 + A1:1997 + A2:2000); German version EN 60168:1994 + A1:1997 + A2:2000
  • DIN 43167-1:1987-12 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; assembly
  • DIN EN 61466-1:1997 Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV - Part 1: Standard strength classes and end fittings (IEC 61466-1:1997); German version EN 61466-1:1997
  • DIN 43167-2:1987 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; caps, u-bolts and hook bolt
  • DIN EN 62217 Berichtigung 1:2007 Polymeric insulators for indoor and outdoor use with a nominal voltage 1000 V - General definitions, test methods and acceptance criteria (IEC 62217:2005); German version EN 62217:2006, Corrigenda to DIN EN 62217 (VDE 0441-1000):2006-11; German v
  • DIN 43167-2:1987-12 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; caps, u-bolts and hook bolt

HU-MSZT, Insulator rated voltage and working voltage

International Electrotechnical Commission (IEC), Insulator rated voltage and working voltage

  • IEC 61952:2002 Insulators for overhead lines - Composite line post insulators for alternative current with a nominal voltage 1 000 V
  • IEC 60433:1998 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type
  • IEC 60433:2021 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for AC systems - Characteristics of insulator units of the long rod type
  • IEC 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
  • IEC TS 62371:2008 Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
  • IEC 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V - Definitions, test methods, acceptance criteria and design recommendations
  • IEC 36C/172/DTS:2007 IEC/TS 62371, Ed. 1.0: Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
  • IEC 60702-3:2016 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guide for use
  • IEC 61466-2:2002 Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 2: Dimensional and electrical characteristics
  • IEC 61466-2:2018 Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 2: Dimensional and electrical characteristics
  • IEC 61466-2:1998 Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 2: Dimensional and electrical characteristics
  • IEC 60055-2:1981/AMD1:1989 Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and constr
  • IEC 61212-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designation and general requirements
  • IEC 61466-1:1997/COR1:2007 Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1: Standard strength classes and end fittings; Corrigendum 1

Korean Agency for Technology and Standards (KATS), Insulator rated voltage and working voltage

  • KS C IEC 61952:2003 Insulators for overhead lines-Composite line post insulators for alternative current with a nominal voltage > 1 000 V
  • KS C IEC 60433:2003 Insulators for overhead lines with a nominal voltage above 1 000 V－Ceramic insulators for a. c. systems－Characteristics of insulator units of the long rod type
  • KS C IEC 61467-2014(2019) Insulators for overhead lines — Insulator strings and sets for lines with a nominal voltage greater than 1 000 V — AC power arc tests
  • KS C IEC 62155:2005 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
  • KS C IEC 61462:2014 Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and design recommendations
  • KS C IEC 61462:2018 Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and desi
  • KS C IEC 62155:2020 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
  • KS C IEC 60502-1:2010 Power cables with extruded insulation and their accessories for rated voltages from 1 kV(Um=1.2 kV) up to 30 kV(Um=36 kV)-Part 1:Cables for rated voltages of 1 kV(Um=1.2 kV) and 3 kV(Um=3.6 kV)
  • KS C IEC 60502-1:2013 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 30 kV (Um=36 kV)-Part 1:Cables for rated voltages of 1 kV (Um=1.2 kV) and 3 kV (Um=3.6 kV)
  • KS C IEC 60502-2:2010 Power cables with extruded insulation and their accessories for rate voltages from 1 kV(Um=1.2 kV) up to 30 kV(Um=36 kV)-Part 2:Cables for rated voltages from 6 kV(Um=7.2 kV) and 30 kV(Um=36 kV)
  • KS C IEC 60502-2:2014 Power cables with extruded insulation and their accessories for rated voltages from 1 kV(Um=1.2 kV) up to 30 kV(Um=36 kV) — Part 2: Cables for rated voltages from 6 kV(Um=7.2 kV) up to 30 kV(Um=36 kV)
  • KS C IEC 60502-2:2016 Power cables with extruded insulation and their accessories for rated voltages from 1 kV(Um＝1.2 kV) up to 30 kV(Um＝36 kV) — Part 2: Cables for rated voltages from 6 kV(Um＝7.2 kV) up to 30 kV(Um＝36 kV)
  • KS C IEC 61639:2014 Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
  • KS C IEC 61109:2018 Insulators for overhead lines — Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria
  • KS C IEC 61639-2014(2019) Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
  • KS C IEC 61109:2004 Composite insulators for a.c. overhead lines with a nominal voltage greater than 1 000 V-Definitions, test methods and acceptance criteria
  • KS C IEC 61109:2014 Composite insulators for a.c. overhead lines with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria
  • KS C IEC 61325:2020 Insulators for overhead lines with a nominal voltage above 1 000 V — Ceramic or glass insulator units for d.c. systems —Definitions, test methods and acceptance criteria
  • KS C IEC 61466-2:2003 Composite string insulator units for overhead lines with a nominal voltage greater than 1000V－Part 2：Dimensional and electrical characteristics
  • KS C IEC 60055-2-2008(2018) Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV(with copper or aluminium conductors and excluding gas-pressure and oil-filled cables)－Part 2：General and construction requiremen
  • KS C IEC 61466-1:2003 Composite string insulator units for overhead lines with a nominal voltage greater than 1000V－Part 1：Standard strength classes and end fittings
  • KS C IEC 61466-1:2019 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V — Part 1: Standard strength classes and end fittings

Association Francaise de Normalisation, Insulator rated voltage and working voltage

  • NF EN 61467:2009 Isolateurs pour lignes aériennes - Chaînes d'isolateurs et chaînes d'isolateurs équipées pour lignes de tension nominale supérieure à 1 000 V - Essais d'arc de puissance en courant alternatif
  • NF C64-405*NF EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greather than 1000 V
  • NF C66-333*NF EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
  • NF EN 60702-2/A1:2015 Câbles à isolant minéral et leurs terminaisons de tension assignée ne dépassant pas 750 V - Partie 2 : terminaisons
  • NF EN 60702-2:2002 Câbles à isolant minéral et leurs terminaisons de tension assignée ne dépassant pas 750 V - Partie 2 : terminaisons
  • NF EN 60702-1:2002 Câbles à isolant minéral et leurs terminaisons de tension assignée ne dépassant pas 750 V - Partie 1 : câbles
  • NF EN 60702-1/A1:2015 Câbles à isolant minéral et leurs terminaisons de tension assignée ne dépassant pas 750 V - Partie 1 : câbles
  • NF EN 60702-3:2016 Câbles à isolant minéral et leurs terminaisons de tension assignée ne dépassant pas 750 V - Partie 3 : guide d'utilisation
  • NF C33-063:1999 Insulated cables and their accessories for power systems. Outdoor terminations, with porcelain insulator, for single-core cables with polymeric extruded insulation for rated voltages above 30 kV (Um equal to 36 kV) up to 500 kV (Um equal to 525 kV).
  • NF EN 61952:2008 Isolateurs pour lignes aériennes - Isolateurs composites rigides à socle pour systèmes à courant alternatif de tension nominale supérieure à 1 000 V - Définitions, méthodes d'essais et critères d'acceptation
  • NF EN 62237:2005 Travaux sous tension - Conduits flexibles isolants avec raccords utilisés avec les outils et matériels hydrauliques
  • NF EN 61109:2009 Isolateurs pour lignes aériennes - Isolateurs composites de suspension et d'ancrage destinés aux systèmes à courant alternatif de tension nominale supérieure à 1 000 V - Définitions, méthodes d'essai et critères d'acceptation
  • NF C33-064:1999 Insulated cables and their accessories for power systems. Indoor or outdoor polymeric terminations, without porcelain insulator, for single-core cables with polymeric extruded insulation for rated voltages above 30 kV (Um equal to 36 kV) up to 150 kV (Um
  • NF EN 60383-1:1997 Isolateurs pour lignes aériennes de tension nominale supérieure à 1 kV - Partie 1 : éléments d'isolateurs en matière céramique ou en verre pour systèmes à courant alternatif. Définitions, méthodes d'essai et critères d'acceptation.
  • NF EN 60383-1/A11:2001 Isolateurs pour lignes aériennes de tension nominale supérieure à 1 kV - Partie 1 : élements d'isolateurs en matière céramique ou en verre pour systèmes à courant alternatif - Définitions, méthodes d'essai et critères d'acceptation
  • NF C32-208:1985 Insulated cables and flexible cords for installations. PVC insulated single-core non sheathed cables with rigid stranded aluminium conductor of rated voltages 450/750 V. Series of the national type of category 2.
  • NF C32-102-13/A1:2000 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13 : single and multicore flexible cables, isulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases.
  • NF C33-030:2013 Insulated cables and their accessories for power systems - Joint equipment for overhead-underground connections between bundle assembled cores and underground cables 0,6/1 kV
  • NF C26-181*NF EN 60893-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1 : definitions, designations and general requirements
  • NF C26-166-1*NF EN 61212-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1 : definitions, designations and general requirements

British Standards Institution (BSI), Insulator rated voltage and working voltage

  • BS EN 60702-2:2002+A1:2015 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations
  • BS EN 60702-1:2002+A1:2015 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Cables
  • BS EN IEC 60433:2021 Insulators for overhead lines with a nominal voltage above 1 000 V. Ceramic insulators for AC systems. Characteristics of insulator units of the long rod type
  • BS EN 60433:1999 Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic insulators with a.c. systems - Characteristics of insulator units of the long rod type
  • BS EN 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V. Definitions, test methods, acceptance criteria and design recommendations
  • BS EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
  • DD IEC/TS 62371:2008 Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
  • BS DD IEC/TS 62371:2008 Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
  • 21/30390465 DC BS EN IEC 61462. Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V. Definitions, test methods, acceptance criteria and design recommendations
  • IEC 61462:2023 Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V. Definitions, test methods, acceptance criteria and design…
  • BS 6480:1988 Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
  • BS 7870-3.20:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors
  • BS 7870-3.21:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors
  • BS 7870-3.21:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split concentric cables with copper or aluminium conductors
  • BS 7870-4.10:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation of rated voltages of 11 kV to 33 kV. Single-core 11 kV to 33 kV cables
  • BS EN 62237:2005 Live working - Insulating hoses with fittings for use with hydraulic tools and equipment
  • BS 7870-3.40:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors
  • BS 7870-3.40:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors
  • 14/30311815 DC BS EN 60305. Insulators for overhead lines with a nominal voltage above 1000 V ceramic or glass insulator units for a a.c. systems. Characteristics of insulator units of the cap and pin type
  • BS 7870-4.10:2011+A1:2016 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation of rated voltages of 11 kV to 33 kV. Single-core 11 kV to 33 kV cables(Implementation of HD 620)
  • BS 7870-3.10:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium condu
  • BS 7870-3.11:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium cond
  • BS 7870-3.11:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conduc
  • 20/30419283 DC BS EN 62271-209 AMD1. High-voltage switchgear and controlgear. Part 209. Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV. Fluid-filled and extruded insulation cables. Fluid-filled and dry-type cable-terminat...
  • BS 7870-3.22:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split concentric cables with copper or aluminium conductors, having low emission of smok
  • BS 7870-3.12:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium cond
  • BS 7870-3.12:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conduc

KR-KS, Insulator rated voltage and working voltage

  • KS C IEC 60433-2003(2023)
  • KS C IEC 61462-2018(2023) Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and desi
  • KS C IEC 61462-2018 Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and desi
  • KS C IEC 62155-2020 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
  • KS C IEC 61109-2018 Insulators for overhead lines — Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria
  • KS C IEC 61325-2020 Insulators for overhead lines with a nominal voltage above 1 000 V — Ceramic or glass insulator units for d.c. systems —Definitions, test methods and acceptance criteria
  • KS C IEC 61952-1-2023 Insulators for overhead lines — Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V — Part 1: Definitions, end fittings and designations
  • KS C IEC 61466-1-2019 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V — Part 1: Standard strength classes and end fittings

AR-IRAM, Insulator rated voltage and working voltage

CENELEC - European Committee for Electrotechnical Standardization, Insulator rated voltage and working voltage

  • EN 61952:2003 Insulators for overhead lines Composite line post insulators for alternative current with a nominal voltage > 1 000 V
  • EN 61212-1:1995 Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes Part 1: General Requirements

BE-NBN, Insulator rated voltage and working voltage

  • NBN C 68-203-1986 Insulated power cable accessories with rated voltages up to 36 kV - Terminations with rated voltages UC/U up to 0,6/1 kV
  • NBN C 68-205-1986 Insulated power cable accessories with rated voltages up to 36 kV - Terminations for indoor with rated voltagesU0/U above 0,6/1 kV up to 20,8/36 kV

American National Standards Institute （ANSI), Insulator rated voltage and working voltage

  • ANSI C119.5-2009 Insulation Piercing Connector Systems, rated 600 volts or less (low voltage aerial bundled cables and insulated and non-insulated line wires)
  • ANSI C119.5-2018 Insulation Piercing Connector Systems, rated 600 volts or less (low voltage aerial bundled cables and insulated and non-insulated line wires)
  • ANSI/IEEE 1776:2009 Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15000 V and Below

ZA-SANS, Insulator rated voltage and working voltage

  • SANS 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
  • SANS 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
  • SANS 62371:2008 Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
  • SANS 61109:1992 Composite insulators for a.c. overhead lines with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria

Danish Standards Foundation, Insulator rated voltage and working voltage

  • DS/EN 62155:2004 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
  • DS/EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
  • DS/EN 62237:2005 Live working - Insulating hoses for use with hydraulic tools and equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Insulator rated voltage and working voltage

  • GB/T 23752-2009 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000V
  • GB/T 22382-2008 Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5kV and above
  • GB/T 22381-2008 Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5kV and above.Fluid-filled and extruded insulation power cables-Fluid-filled and dry type cable-terminations

未注明发布机构, Insulator rated voltage and working voltage

  • BS EN 62155:2003(2004) Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V

Institute of Electrical and Electronics Engineers (IEEE), Insulator rated voltage and working voltage

  • IEEE Std 404-1993 IEEE Standard for cable joints for use with extruded dielectric cable rated 5000-138 OOOV and cable joints for use with laminated dielectric cable rated 2500-500 OOO V
  • IEEE 429-1994 Recommended practice for thermal evaluation of sealed insulation systems for AC electric machinery employing form-wound preinsulated stator coils for machines rated 6900 V and below
  • IEEE 275-1992 Recommended practice for thermal evaluation of insulation systems for alternating-current electric machinery; employing form-wound preinsulated stator coils for machines rated 6900 V and below
  • IEEE 275-1981 IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Machines Rated 6900 V and Below
  • IEEE Unapproved Draft Std P48/D5.1, May 2008 IEEE Draft Standard for Test Procedures and Requirements for Alternating Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV Through 765 kV Or Extruded Insulation Rated 2.5 kV Through 500 kV (Revision of IEEE 48-199
  • IEEE Unapproved Draft Std P1776_D08, Dec 2007 IEEE Draft Recommended Practice for Thermal Evaluation of Unsealed Or Sealed Insulation Systems for Ac Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15000 V and Below
  • IEEE Unapproved Draft Std P1776/D12, Jun 2008 IEEE Draft Recommended Practice for Thermal Evaluation of Unsealed Or Sealed Insulation Systems for Ac Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15000 V and Below
  • IEEE Unapproved Draft Std P1776/D9b, Feb. 2008 IEEE Draft Recommended Practice for Thermal Evaluation of Unsealed Or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15000 V and Below

Canadian Standards Association (CSA), Insulator rated voltage and working voltage

  • CSA C62155-06-CAN/CSA-2006 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
  • CSA C22.2 No.241-97-1997 IEEE Standard for Cable Joints for Use with Extruded Dielectric Cable Rated 5000-138 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2500-500 000 V Wiring Products Second Edition; General Instruction No 1; IEEE Std 404

National Electrical Manufacturers Association（NEMA), Insulator rated voltage and working voltage

  • NEMA C119.5-2009 Electric Connectors- Insulation Piercing Connector Systems, Rated 600 Volts or Less (Low-Voltage Aerial Bundled Cables and Insulated and Non-Insulated Line Wires)
  • NEMA ANSI/NEMA HP 8-2013 Electrical and Electronic Cross-Linked, Modified Low-Smoke Polyolefin (XLPO) Insulated Hook-Up Wire, Types LS (rated 105癈; 600 V), ZHDM (rated 90癈; 600 V), ZHDH (rated 90癈; 600 V), ZH (rated 125癈; 600 V), and ZHX (rated 125癈; 1000 V)

SE-SIS, Insulator rated voltage and working voltage

  • SIS SS IEC 273:1982 Insulators — Indoor and outdoor post insulators and post insulator units for systems with nominal voltages greater than 1000 V — Dimensions and characteristics
  • SIS SS IEC 168:1984 Insulators — Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V - Tests
  • SIS SS 428 91 10-1985 Operating and earthing sticks of insulating material for electrical installations with nominal voltage above 1 kV- Design and testing
  • SIS SS 424 03 23-1987 Control cables with rated voltage 150/250 V, type FKAR - PVC-lnsulated, PVC-sheathed control cables for electronic equipment - Design and testing

ES-UNE, Insulator rated voltage and working voltage

  • UNE 21123-2:2017 Industrial cables of rated voltage 0,6/1 kV. Part 2: XLPE insulated and PVC Sheathed cables.
  • UNE 21123-1:2017 Industrial cables of rated voltage 0,6/1 kV. Part 1: PVC insulated and sheathed cables.
  • UNE-EN 60702-3:2016 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guidance for use
  • UNE 21123-3:2017 Industrial cables of rated voltage 0,6/1 kV. Part 3: EPR insulated and PVC sheathed cables.
  • UNE 21123-5:2017 Electric cables for industrial use of rated voltage 0,6/1 kV. Part 5: EPR insulated and polyolefin sheathed cables.

CZ-CSN, Insulator rated voltage and working voltage

European Committee for Electrotechnical Standardization（CENELEC）, Insulator rated voltage and working voltage

  • EN IEC 61462:2023 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V - Definitions, test methods, acceptance criteria and design recomme...
  • EN 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
  • HD 578 S1-1992 Characteristics of Indoor and Outdoor Post Insulators for Systems with Nominal Voltages Greater Than 1000 V
  • EN 62237:2005 Live working Insulating hoses with fittings for use with hydraulic tools and equipment
  • EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
  • EN 61212-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Part 1: Definitions, designations and general requirements
  • EN 60168:1994 Tests on Indoor and Outdoor Post Insulators of Ceramic Material or Glass for Systems with Nominal Voltages Greater Than 1 kV (Incorporates Amendments A1: 1997 and A2: 2000)

AENOR, Insulator rated voltage and working voltage

  • UNE-EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations.
  • UNE 21123-4:2017 Industrial cables of rated voltage 0,6/1kV. Part 4: XLPE insulated and polyolefin sheathed cables.
  • UNE-EN 62155:2006 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V (IEC 62155:2003, modified)

TR-TSE, Insulator rated voltage and working voltage

  • TS 556-1967 Test On Indoor And ?utdoor Fost Insulators For Syetems With Nominal Voltages Greater Than 1000 V

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Insulator rated voltage and working voltage

  • IEEE 339-1972 Requirements for Switching-Impulse Voltage Insulation Strength for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis (362 kV and Above)
  • IEEE 1776-2008 Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form- Wound Pre-Insulated Stator Coils for Machines Rated 15 000 V and Below

Lithuanian Standards Office , Insulator rated voltage and working voltage

  • LST EN 61462-2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations (IEC 61462:2007)
  • LST EN 62155-2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V (IEC 62155:2003, modified)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Insulator rated voltage and working voltage

  • GB/T 22382-2017 Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
  • GB/T 22381-2017 Cable connections between gas-insulated metal-enclosed switchgear for rated voltages equal to and above 72.5kV and fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations

IEC - International Electrotechnical Commission, Insulator rated voltage and working voltage

  • TS 62371-2008 Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V (Edition 1.0)

American Society for Testing and Materials (ASTM), Insulator rated voltage and working voltage

  • ASTM D2655-23 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V, 90 °C Operation
  • ASTM D2655-19 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V, 90°C Operation

RO-ASRO, Insulator rated voltage and working voltage

  • STAS 7006-1974 THREE-PHASE AND SINGLE PHASE INDUCTION MOTORS WITH OUTPUTS FROM 0,1 TO 10000 k\V AND RATED VOLTAGE UP TO 6000 V. Determination of winding resistance of stator without switching the machine from the network

ES-AENOR, Insulator rated voltage and working voltage

YU-JUS, Insulator rated voltage and working voltage

  • JUS N.C5.358-1994 Electric power and lighting - Cables for mining puposes, rubber insulated and sheathed, for drilling machines, power supply type GN 58, for rated voltage up to 450/750V
  • JUS N.C5.350/1-1993 Electric power and lighting - Flexible cables for mobile devices,rubber insulated and sheathed,type GN 50 and EPN 5c for rated voltages up to 450/750 V- Amendments

Group Standards of the People's Republic of China, Insulator rated voltage and working voltage

  • T/CAS ES303708001-2022 Rules for quality grading and evaluating of industrial products—Power cables with extruded insulation for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV)

RU-GOST R, Insulator rated voltage and working voltage

  • GOST 28739-1990 Tests on indoor post insulators of organic materials for systems with nominal voltages greater than 1000 V up to 300 kV
  • GOST 19797-1985 Base ceramic indoor insulators for systems with nominal voltage over 1000 V. Types, basic parameters and dimensions

(U.S.) Ford Automotive Standards, Insulator rated voltage and working voltage

  • FORD WSK-M1L124-A-2003 CABLE, LOW TENSION, VINYL INSULATED, 105 DEGREES C, THIN WALL, BARE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1L120-A3-2003 CABLE, PRIMARY LOW TENSION, 85 °C VINYL INSULATED - REDUCED WALL THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M1L132-A1-2003 CABLE, LOW TENSION, POLYURETHANE INSULATED, 80 °C, HEAVY WALL, COILED AND FLEXIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M1L126-A1-2003 CABLE, LOW TENSION, TPE INSULATED, 150 °C, THIN WALL, BARE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M1L127-A-2003 CABLE, LOW TENSION, PTFE INSULATED, 260 °C THIN WALL, NICKEL PLATED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M1L124-B-2003 CABLE, LOW TENSION, VINYL INSULATED, 90 DEGREES C, STANDARD WALL, BARE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M1L124-A)
  • FORD WSK-M1L125-A-2003 CABLE, LOW TENSION, VINYL INSULATED, 105 DEGREES C, THIN WALL, TINNED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M1L124-A)
  • FORD WSK-M1L126-A2-2003 CABLE, LOW TENSION, TPE INSULATED, 135 °C, THIN WALL, BARE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M1L126-A1)
  • FORD WSK-M1L128-A1-2003 CABLE, LOW TENSION, TPE INSULATED, 150 °C, THIN WALL, SHIELDED AND TWISTED, BARE, TWO CORE ***TO BE USED WITH FORD WSS-M99P1111-A***

European Committee for Standardization (CEN), Insulator rated voltage and working voltage

  • HD 22.8 S1 A2-1992 Rubber insulated cables of rated voltages up to and including 450/750 V; part 8: polychloroprene or equivalent synthetic elastomer sheathed cables for use as decorative chains

  Insulator rated voltage and working voltage.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved