ZH

RU

ES

storage modulus and

storage modulus and, Total:497 items.

In the international standard classification, storage modulus and involves: Fuel cells, Wind turbine systems and other alternative sources of energy, Metrology and measurement in general, Energy and heat transfer engineering in general, Refrigerating technology, Aerospace engines and propulsion systems, Environmental protection, Electrical engineering in general, Road vehicle systems, Commercial vehicles, Solar energy engineering, Power transmission and distribution networks, Terminology (principles and coordination), Installations in buildings, Electric road vehicles, Software development and system documentation, Protective equipment, Audio, video and audiovisual engineering, Soil quality. Pedology, Coals, Geology. Meteorology. Hydrology, Machine tool systems, Domestic, commercial and industrial heating appliances, Information technology (IT) in general, Vocabularies, Mechanical testing, Kitchen equipment, Testing of metals, Paper and board, Astronomy. Geodesy. Geography, Reinforced plastics, Fluid power systems, Equipment for petroleum and natural gas industries, Rotating machinery, Protection of and in buildings, Lighting, Electrical accessories, Farming and forestry, Fibre optic communications, Optics and optical measurements, Barrels. Drums. Canisters, Plastics, Medical equipment, Telecommunication systems, Lamps and related equipment, Document imaging applications, Technical product documentation, Industrial automation systems, Galvanic cells and batteries, Protection against dangerous goods, Applications of information technology, Screw threads, Fluid storage devices, Thermodynamics and temperature measurements, Special purpose vehicles, Telecommunication terminal equipment, Measurement of volume, mass, density, viscosity, Storage equipment, Interface and interconnection equipment, Electronic tubes, Languages used in information technology, Acoustics and acoustic measurements, Passenger and cabin equipment, Springs, Radiation measurements, Ceramics, Data storage devices, Petroleum, petroleum products and natural gas handling equipment, Switchgear and controlgear, Glass, Radiocommunications, Electrical and electronic testing, Fasteners, Structures of buildings, Shop fittings, Hydraulic fluids, Wood-based panels, Textile fibres, Nuclear energy engineering, Chipless working equipment, Electricity. Magnetism. Electrical and magnetic measurements, Rectifiers. Convertors. Stabilized power supply, Cereals, pulses and derived products, Passenger cars. Caravans and light trailers, Company organization and management, Construction materials, Agricultural machines, implements and equipment.


Association Francaise de Normalisation, storage modulus and

  • NF EN IEC 62282-8-101:2020 Technologies des piles à combustible - Partie 8-101 : système de stockage de l'énergie utilisant des modules à piles à combustible en mode inversé - Procédures d'essai pour la performance des cellules élémentaires et des piles à oxyde solid...
  • NF C57-113-3*NF EN IEC 61853-3:2018 Photovoltaic (PV) module performance testing and energy rating - Part 3 : energy rating of PV modules
  • NF E31-362*NF EN 15332:2019 Heating boilers - Energy assessment of hot water storage tanks
  • NF R50-101-1:1997 Electrically propelled road vehicles. Specific requirements for safety. Part 1 : on board energy storage.
  • NF E31-362:2008 Heating boilers - Energetic assessment of hot water storage systems.
  • NF EN 60531/A11:2019 Appareils électrodomestiques de chauffage à accumulation des locaux - Méthodes de mesure de l'aptitude à la fonction
  • NF EN 60531:2001 Appareils électrodomestiques de chauffage à accumulation des locaux - Méthodes de mesure de l'aptitude à la fonction
  • NF EN 60379:2004 Méthodes de mesure de l'aptitude à la fonction des chauffe-eau électriques à accumulation pour usages domestiques
  • NF C57-113-2*NF EN 61853-2:2017 Photovoltaic (PV) module performance testing and energy rating - Part 2 : spectral responsivity, incidence angle and module operating temperature measurements
  • NF EN 62428:2008 Énergie électrique - Composantes modales dans les systèmes a.c. triphasés - Grandeurs et transformations
  • NF EN 61853-2:2017 Essais de performance et caractéristiques assignées d'énergie des modules photovoltaïques (PV) - Partie 2 : mesurages de réponse spectrale, d'angle d'incidence et de température de fonctionnement des modules
  • NF ISO 10716:1996 Papier et carton - Détermination de la réservé alcaline
  • NF EN IEC 62282-8-201:2020 Technologies des piles à combustible - Partie 8 201 : systèmes de stockage de l'énergie utilisant des modules à piles à combustible en mode inversé - Procédures d'essai pour la performance des systèmes électriques à électriques
  • NF EN 50350:2005 Systèmes de commande de charge des appareils de chauffage à accumulation à usage domestique - Méthodes de mesure de l'aptitude à la fonction
  • FD T90-524:2015 Water quality - Quality controle for storage and water sampling
  • NF EN 61853-1:2011 Essais de performance et caractéristiques assignées d'énergie des modules photovoltaïques (PV) - Partie 1 : mesures de performance en fonction de l'éclairement et de la température, et caractéristiques de puissance
  • NF D35-350-3*NF EN 13203-3:2010 Solar supported gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 500 liters water storage capacity - Part 3 : assessment of energy consumption
  • NF C57-113-4*NF EN IEC 61853-4:2018 Photovoltaic (PV) module performance testing and energy rating - Part 4 : standard reference climatic profiles
  • NF C56-282-8-201*NF EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
  • FD CEN/TR 15378-4:2019 Performance énergétique des bâtiments - Performance énergétique mesurée - Partie 4 : explication et justification de l'EN 15378-3, Modules M3-10, M8-10
  • NF M88-560:2005 Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods.
  • NF T58-205:2005 Thermoplastic tanks made from blow or rotational moulded polyethylene - Tanks for the above ground storage of chemicals - Requirements and test methods.
  • NF T58-205*NF EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals - Blow moulded or rotationally moulded polyethylene tanks - Requirements and test methods
  • NF C56-282-8-101*NF EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
  • NF D62-041:2011 Office furniture - Storage furniture - Durability and performances - Tests and requirements
  • NF P50-780:2008 Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings.
  • NF P52-319-3*NF EN 15378-3:2017 Energy performance of buildings - Heating and DHW systems in buildings - Part 3 : measured energy performance, Module M3-10, M8-10
  • NF P78-455:1986 Glazing and mirrors. Insulating glazing. Determination method of the stiffness coefficient kv and of the distortion ability.
  • NF C57-113-1*NF EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1 : irradiance and temperature performance measurements and power rating
  • NF C42-360/A2:2001 Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals.
  • NF EN 843-2:2007 Céramiques techniques avancées - Propriétés mécaniques des céramiques monolithiques à température ambiante - Partie 2 : détermination du module de Young, du module de cisaillement et du coefficient de Poisson
  • NF P50-532-4*NF EN 12977-4:2018 Thermal solar systems and components - Custom built systems - Part 4 : performance test methods for solar combistores
  • NF C56-282-8-102*NF EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
  • NF EN 13271:2002 Éléments de fixation du bois - Valeurs caractéristiques de capacité résistante et du module de glissement des assembleurs mécaniques du bois
  • NF P50-779:2008 Energy performance of buildings - Overall energy use and definition of energy ratings.
  • NF P19-819*NF EN 15435:2008 Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance.

German Institute for Standardization, storage modulus and

  • DIN 16728:2019-10 Pipes and fittings made of unfilled, non-reinforced and crosslinked polyethylene (PE-X) - Determination of the degree of crosslinking through rheological measurement of the storage modulus; Text in German and English
  • DIN EN 60379:2004-07 Methods for measuring the performance of electric storage water-heaters for household purposes (IEC 60379:1987, modified); German version EN 60379:2004 / Note: DIN 44532-1 (1989-06), DIN 44532-2 (1989-06), DIN 44532-3 (1989-06) and DIN 44532-100 (1989-...
  • DIN EN 15332:2008 Heating boilers - Energy assessment of hot water storage systems; English version of DIN EN 15332:2008-01
  • DIN V 44570-60531:2008 Household electric thermal storage room heaters - Methods for measuring performance (IEC 59C/107/DC:2002)
  • DIN EN 60531:2001 Household electric thermal storage room heaters - Methods for measuring performance (IEC 60531:1999, modified); German version EN 60531:2000
  • DIN EN 16798-15:2017-11 Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage; German version EN 16798-15:2017
  • DIN EN 16798-15:2017 Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage
  • DIN EN 15316-5:2022 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7; German and English version prEN 15316-5:2022
  • DIN EN 15316-5:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7
  • DIN EN 50350:2004-12 Charging control systems for household electric room heating of the storage type - Methods for measuring performance; German version EN 50350:2004 / Note: DIN 44574-1 (1985-03), DIN 44574-2 (1985-03), DIN 44574-5 (1985-03) and DIN 44574-6 (1985-03) rem...
  • DIN 19242-8:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: I/O operation on a peripherical storage system (random access)
  • DIN EN 13203-2:2006 Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity - Part 2: Assessment of energy consumption; English version of DIN EN 13203-2:2006-11
  • DIN 16728:2019 Pipes and fittings made of unfilled, non-reinforced and crosslinked polyethylene (PE-X) - Determination of the degree of crosslinking through rheological measurement of the storage modulus; Text in German and English
  • DIN EN 15217:2007 Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings English version of DIN EN 15217:2007-09
  • DIN EN 15378-3:2017 Energy performance of buildings - Heating and DHW systems in buildings - Part 3: Measured energy performance, Module M3-10, M8-10
  • DIN 25422:2013 Storage and keeping of radioactive materials - Requirements on protection against radiation, fire and theft to be met by storage facilities
  • DIN EN 12977-4:2018 Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores
  • DIN EN 15603:2008 Energy performance of buildings - Overall energy use and definition of energy ratings; English version of DIN EN 15603:2008-07
  • DIN EN 15435:2008 Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance; English version of DIN EN 15435:2008-10

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., storage modulus and

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), storage modulus and

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, storage modulus and

  • GB/T 42847.3-2023 Reversible mode fuel cell modules for energy storage systems Part 3: Electrical energy storage system performance test methods
  • GB/T 42716-2023 Guide for modeling of electrochemical energy storage power station
  • GB/T 43156-2023 Geographic information vector data model and storage specifications
  • GB/T 18491.5-2010 Information technology.Software measurement.Functional size measurement.Part 5: Determination of functional domains for use with functional size measurement
  • GB/T 42847.2-2023 Reversible mode fuel cell modules for energy storage systems Part 2: Performance test methods for reversible mode proton exchange membrane cells and stacks
  • GB/T 18491.3-2010 Information technology.Software measurement.Functional size measurement.Part 3:Verification of functional size measurement methods
  • GB/T 24998-2010 Paper and board-Determination of alkali reserve
  • GB/T 18491.4-2010 Information technology.Software measurement.Functional size measurement.Part 4:Reference model
  • GB/T 26804.4-2011 Industrial control computer system.Function modules.Part 4: Methods of evaluating the performance for analogue input/output channel module
  • GB/T 7259-1987 Guidelines for presenting performance of analog process measurement and control instrument
  • GB 7259-1987 Guidelines for performance representation methods of analog process measurement and control instruments
  • GB 5908-1986 The quenching ability of flame arresters and its test method for petroleum tanks
  • GB/T 8653-1988 Metallic materials--Determination of Young's modulus, chord modulus, tangent modulus and Poisson's ratio (statical method)
  • GB/T 26804.6-2011 Industrial control computer system.Function module.Part 6:Methods of evaluating the performance for digital input/output channel modules
  • GB/T 42566-2023 System and software engineering functional scale measurement MkII function point analysis method
  • GB/T 42588-2023 System and software engineering functional size measurement NESMA method
  • GB/T 42452-2023 COSMIC Method for Functional Size Measurement in Systems and Software Engineering
  • GB/T 42448-2023 FiSMA1.1 Method for Functional Scale Measurement of Systems and Software Engineering
  • GB/T 42449-2023 IFPUG method for functional size measurement in systems and software engineering

American Society for Testing and Materials (ASTM), storage modulus and

  • ASTM E2254-09 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
  • ASTM F3063/F3063M-18a Standard Specification for Aircraft Fuel and Energy Storage and Delivery
  • ASTM F3063/F3063M-18 Standard Specification for Aircraft Fuel and Energy Storage and Delivery
  • ASTM F2731-18 Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
  • ASTM F2731-11 Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
  • ASTM E2254-18 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
  • ASTM E2254-08 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
  • ASTM E2254-23 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
  • ASTM E111-17 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
  • ASTM D5998-10 Standard Specification for Molded Polyethylene Shipping and Storage Drums
  • ASTM F3063/F3063M-15 Standard Specification for Design and Integration of Fuel/Energy Storage and Delivery System Installations for Aeroplanes
  • ASTM F3063/F3063M-16 Standard Specification for Design and Integration of Fuel/Energy Storage and Delivery System Installations for Aeroplanes
  • ASTM E111-04(2010) Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
  • ASTM D5998-03 Standard Specification for Molded Polyethylene Shipping and Storage Drums
  • ASTM D5998-96 Standard Specification for Molded Polyethylene Shipping and Storage Drums
  • ASTM D5998-16 Standard Specification for Molded Polyethylene Shipping and Storage Drums
  • ASTM F2731-10 Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
  • ASTM E111-04 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
  • ASTM E111-97 Standard Test Method for Young''s Modulus, Tangent Modulus, and Chord Modulus
  • ASTM C1784-14 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
  • ASTM D8326-21 Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall
  • ASTM D8326-20 Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall
  • ASTM F3104-14 Standard Test Methods for Evaluating Design and Performance Characteristics of Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment
  • ASTM E2236-10(2015) Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
  • ASTM E781-86(2003) Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates
  • ASTM C623-21 Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
  • ASTM D797-82 Test Method for Rubber Property-Young's Modulus at Normal and Subnormal Temperatures

Canadian Standards Association (CSA), storage modulus and

  • CSA C742-2015 Performances énergétiques des machines à gla?ons automatiques et des réserves de gla?ons (Quatrième édition)
  • CAN/CSA-ISO/IEC TR 14143-5:2005 Information technology - Software measurement - Functional size measurement - Part 5: Determination of functional domains for use with functional size measurement
  • CSA P.3-04-2004 M閠hode d抏ssai pour mesurer la consommation d掗nergie et le rendement 閚erg閠ique des chauffe-eau au gaz ?accumulation Mise ?jour no 2
  • CSA ISO/IEC-TR-14143-5-05:2005 Information technology - Software measurement - Functional size measurement - Part 5: Determination of functional domains for use with functional size measurement First Edition
  • CSA C827-98-CAN/CSA-1998 Rendement Energetique Des Refrigerateurs Et Congelateurs Pour Service Alimentaire Premiere Edition; Fiche No.1; Mise a?Jour No 2
  • CSA P.5-2009 Test method for measuring per-cycle energy consumption, energy factor, and low power mode energy consumption of residential gas clothes dryers (Third Edition)
  • CAN/CSA-ISO/IEC 19761:2012 Software engineering - COSMIC: a functional size measurement method
  • CAN/CSA-ISO/IEC 20926:2010 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009

NEMA - National Electrical Manufacturers Association, storage modulus and

  • NEMA ESS 1-2019 Standard for Uniformly Measuring and Expressing the Performance of Electrical Energy Storage Systems

API - American Petroleum Institute, storage modulus and

  • API PUBL 1663A- UNDERGROUND STORAGE TANK REMOVAL AND UNDERGROUND STORAGE TANK INSTALLATION MODULE
  • API RP 1171-2015 Functional Integrity of Natural Gas Storage in Depleted Hydrocarbon Reservoirs and Aquifer Reservoirs (FIRST EDITION)
  • API STD 2501-1955 CRUDE-OIL TANK MEASUREMENT AND CALIBRATION (FIRST EDITION)
  • API STD 2501-1961 CRUDE OIL TANK MEASUREMENT AND CALIBRATION (SECOND EDITION)
  • API PAPER-906-14-K-1969 WATERFLOOD CORRELATION TO FORECAST RATE AND RESERVES
  • API MPMS 2.2A-1995 Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method (First Edition)
  • API STD 2551-1965 Standard Method for Measurement and Calibration of Horizontal Tanks (ASTM D1410)

CENELEC - European Committee for Electrotechnical Standardization, storage modulus and

  • EN IEC 61853-3:2018 Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating of PV modules
  • EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating
  • EN IEC 61853-4:2018 Photovoltaic (PV) module performance testing and energy rating - Part 4: Standard reference climatic profiles

International Electrotechnical Commission (IEC), storage modulus and

  • IEC White Paper RE-EES:2012 Grid integration of large-capacity Renewable Energy sources and use of large-capacity Electrical Energy Storage
  • IEC TS 62933-3-3:2022 Electrical energy storage (EES) systems - Part 3-3: Planning and performance assessment of electrical energy storage systems - Additional requirements for energy intensive and backup power application
  • IEC Technology Report Nanotechnology:2013 Nanotechnology in the sectors of solar energy and energy storage
  • IEC 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
  • IEC TS 62933-3-1:2018 Electrical energy storage (EES) systems - Part 3-1: Planning and performance assessment of electrical energy storage systems - General specification
  • IEC TS 62654:2012 Network-based energy consumption measurement - Energy saving system - Conceptual model
  • IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible o
  • IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
  • IEC TS 62933-3-2:2023 Electrical energy storage (EES) systems - Part 3-2: Planning and performance assessment of electrical energy storage systems - Additional requirements for power intensive and renewable energy sources
  • IEC 60151-24:1971 Measurements of the electrical properties of electronic tubes. Part 24 : Methods of measurement of cathode-ray charge-storage tubes
  • IEC 62282-8-102:2019 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membrane, incl
  • IEC 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating
  • IEC 62442-3:2014 Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear
  • IEC TS 62933-2-2:2022 Electrical energy storage (EES) systems - Part 2-2: Unit parameters and testing methods - Application and performance testing

National Electrical Manufacturers Association(NEMA), storage modulus and

Society of Automotive Engineers (SAE), storage modulus and

  • SAE J1609-2022 Air Reservoir Capacity Performance Guide - Trucks and Buses
  • SAE J1609-2002 Air Reservoir Capacity Performance Guide—Commercial Vehicles
  • SAE J1609-2010 Air Reservoir Capacity Performance Guide Trucks and Buses
  • SAE J1793-2006 Self-Propelled Sweepers and Scrubbers Tank and Hopper Capacity Rating
  • SAE ARP1967-1992 CONTAINERS, SHIPPING AND STORAGE, AIRCRAFT ENGINES AND MODULES - METAL, REUSABLE
  • SAE J1793-2013 Self-Propelled Sweepers and Scrubbers Tank and Hopper Capacity Rating
  • SAE J1400-2010 Laboratory Measurement of the Airborne Sound Barrier Performance of Flat Materials and Assemblies
  • SAE ARP8058-2014 Thermal Design and Performance of Airplane In-Flight Food Storage Carts
  • SAE J2881-2010 Measurement of Aerodynamic Performance for Mass-Produced Cars and Light-Duty Trucks

SAE - SAE International, storage modulus and

  • SAE J1609-1997 Air Reservoir Capacity Performance Guide - Commercial Vehicles
  • SAE J1609-2020 Air Reservoir Capacity Performance Guide - Commercial Vehicles
  • SAE J1793-2021 Self-Propelled Sweepers and Scrubbers Tank and Hopper Capacity Rating
  • SAE ARP1967-1986 Containers@ Shipping and Storage@ Aircraft Engines and Modules - Metal@ Reusable
  • SAE J2881-2019 Measurement of Aerodynamic Performance for Mass-Produced Cars and Light-Duty Trucks

Korean Agency for Technology and Standards (KATS), storage modulus and

  • KS C 8527-1995 Solar simulators used in measuring crystalline solar cells and modules
  • KS C IEC TS 62933-3-1:2020 Electrical energy storage(EES) systems —Part 3-1: Planning and performance assessment of electrical energy storage systems — General specification
  • KS M ISO 12115:2002 Fibre-reinforced plastics-Thermosetting moulding compounds and prepregs-Determination of flowability, maturation and shelf life
  • KS B ISO 5596:2003 Hydraulic fluid power-Gas-loaded accumulators with separator-Ranges of pressures and volumes and characteristic quantities
  • KS M ISO 11223:2014 Petroleum and liquid petroleum products — Direct static measurements — Measurement of content of vertical storage tanks by hydrostatic tank gauging
  • KS C IEC 60531:2002 Methods for measuring the performance of electric thermal storage water-heaters for household and similar purposes
  • KS X 5909-2001(2021) Quality and storage method of microfilm
  • KS C 1232-2018 Smart Metering ─ COSEM object models for Home use - Definitions
  • KS C 1233-2-2018 Smart Metering ─ Security module ─ Part 2: Interface and commands for exchange
  • KS C 8527-2005(2010) Solar simulators used in measuringcrystalline solar cells and modules
  • KS L 1598-1994 Testing methods for elastic modulus of high performance ceramics at elevated temperature
  • KS L 1598-2009(2019) Testing method for elastic modulus of high performance ceramics at elevated temperature
  • KS C 8547-2017 Redox flow battery for use in energy storage system — Performance and safety tests
  • KS M ISO 4266-6-2003(2018)

Group Standards of the People's Republic of China, storage modulus and

  • T/CEC 385-2020 DL/T860 engineering application information model of electrochemical energy storage power station
  • T/CFLP 0008-2017 The Requirements of Service Quality for Transportation Packaging of Energy Measurement instruments
  • T/GSEA 002-2023 Testing method for power quality of electrochemical energy storage-photovoltaic system
  • T/CES 062-2021 Technical guide for energy management system of port shore power storage system
  • T/CES 168-2022 Technical requirements for parameter measurement of control model of electrochemical energy storage power station
  • T/CIAPS 0020-2022 General quality characteristics of lithium ion battery systems for energy storage
  • T/CAAP 026-2022 Requirements and test methods for energy-storing capability of ankle-foot units
  • T/CIES 026-2020 Intelligent lighting equipment — Non-active mode power measurement
  • T/CQCBDS 0006-2017 Intelligent agent model of big data service quality (CQCBDS standard classification name: basic-technical reference model-service quality: intelligent agent model)
  • T/CRES 0009-2022 Testing method of thermochemical energy storage temperature and energy density for solid compounds
  • T/JSEE 004-2018 Testing specification for metering performance of merging unit with analog input
  • T/CEC 512-2021 Technical specification for medium voltage series voltage quality comprehensive control device with energy storage
  • T/CIDADS 00012-2023 Application of smart home user experience metric model
  • T/CIAPS 0004-2018 Performance requirements for the secondary lithium ion cells and batteries for energy storage applications

U.S. Military Regulations and Norms, storage modulus and

British Standards Institution (BSI), storage modulus and

  • PD IEC TS 62933-3-1:2018 Electrical energy storage (EES) systems. Planning and performance assessment of electrical energy storage systems. General specification
  • BS EN 15332:2007 Heating boilers - Energy assessment of hot water storage systems
  • BS EN IEC 60379:2023 Methods for measuring the performance of electric storage water heaters for household purposes
  • BS ISO/IEC 24091:2019 Information technology. Power efficiency measurement specification for data center storage
  • PD IEC TS 62933-3-3:2022 Electrical energy storage (EES) systems. Planning and performance assessment of electrical energy storage systems. Additional requirements for energy intensive and backup power applications
  • BS EN 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating. Spectral responsivity, incidence angle and module operating temperature measurements
  • BS EN IEC 62282-8-102:2020 Fuel cell technologies - Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
  • BS ISO 10716:2022 Paper and board. Determination of alkali reserve
  • BS EN 15316-5:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Space heating and DHW storage systems (not cooling), Module M3-7, M8-7
  • BS EN IEC 62282-8-201:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
  • BS EN 15193-1:2017 Energy performance of buildings. Energy requirements for lighting. Specifications, Module M9
  • BS 3999-2:1991 Methods of measuring the performance of household electrical appliances - Thermal storage electric water-heaters
  • 21/30367731 DC BS EN IEC 60379. Methods for measuring the performance of electric storage water-heaters for household purposes
  • BS EN IEC 62282-8-101:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
  • BS EN 61970-403:2008 Energy management system application program interface (EMS-API) -Part 403: Generic data access
  • BS EN ISO 11363-2:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Inspection gauges
  • BS EN 61237-4:1998 Broadcast video tape recorders. Methods of measurement. Analogue audio performance measurements
  • BS EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating. Irradiance and temperature performance measurements and power rating
  • BS IEC 62830-7:2021 Semiconductor devices. Semiconductor devices for energy harvesting and generation. Linear sliding mode triboelectric energy harvesting
  • 22/30410191 DC BS IEC 63285-3. Energy Storage Power Converter (ESPC) Sub-System for use in Electrical Energy Storage Systems (EESS) - Part 3. Method of specifying the performance and test requirements
  • BS ISO/IEC TR 14143-4:2002 Information technology - Software measurement - Functional size measurement - Reference model
  • BS 7849-1:1996 Petroleum and liquid petroleum products. Direct static measurements. Contents of vertical storage tanks. Mass measurement by hydrostatic tank gauging
  • BS ISO/IEC 25059:2023 Software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Quality model for AI systems
  • BS ISO 4266-4:2023 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in atmospheric tanks
  • 22/30443190 DC BS EN 15316-5. Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies - Part 5. Space heating and DHW storage systems (not cooling), Module M3-7, M8-7
  • BS EN 15378-3:2017 Energy performance of buildings. Heating and DHW systems in buildings. Measured energy performance, Module M3-10, M8-10
  • BS ISO 50006:2014 Energy management systems. Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI). General principles and guidance
  • 22/30445185 DC BS EN 62282-8-201. Fuel cell technologies. Part 8-201. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
  • PD IEC TS 62933-2-2:2022 Electrical energy storage (EES) systems. Unit parameters and testing methods. Application and performance testing
  • BS ISO 4266-1:2023 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in atmospheric tanks
  • BS EN 13341:2005 Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods
  • BS 4783-1:1988 Storage, transportation and maintenance of media for use in data processing and information storage - Recommendations for disk packs, storage modules and disk cartridges
  • BS EN 1918-2:1998 Gas supply systems - Underground gas storage - Functional recommendations for storage in oil and gas fields
  • BS ISO 16343:2013 Energy performance of buildings. Methods for expressing energy performance and for energy certification of buildings
  • BS EN 15217:2007 Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings
  • BS EN ISO 25745-1:2012 Energy performance of lifts, escalators and moving walks. Energy measurement and verification
  • BS EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals. Blow moulded or rotationally moulded polyethylene tanks. Requirements and test methods
  • BS EN 13575:2004 Thermoplastics tanks made from blow or rotational moulded polyethylene. Tanks for the above ground storage of chemicals. Requirements and test methods
  • BS EN 15659:2019 Tracked Changes. Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units
  • BS EN 15603:2008 Energy performance of buildings - Overall energy use and definition of energy ratings
  • 22/30461348 DC BS ISO 4266-4. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Part 4. Measurement of temperature in atmospheric tanks
  • 22/30461339 DC BS ISO 4266-1. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Part 1. Measurement of level in atmospheric tanks
  • BS EN 16212:2012 Energy Efficiency and Savings Calculation, Top-down and Bottom-up Methods
  • 18/30352664 DC BS IEC 62282-8-102. Fuel cell technologies. Part 8-102. Energy storage systems using fuel cell modules in reverse mode. Test procedures for proton exchange membrane single cell and stack performance including reversing operation
  • 17/30352625 DC BS IEC 62282-8-101. Fuel cell technologies. Part 8-101. Energy storage systems using fuel cell modules in reverse mode. Test procedures for solid oxide single cell and stack performance including reversing operation
  • BS EN 15316-4-10:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Wind power generation systems, Module M11-8-7
  • DD ENV 12977-3-2001 Thermal solar systems and components. Custom built systems. Performance characterisation of stores for solar heating systems
  • BS ISO/IEC 20006-1:2014 Information technology for learning, education and training. Information model for competency. Competency general framework and information model
  • BS ISO/IEC 14143-2:2011 Information technology. Software measurement. Functional size measurement. Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
  • BS EN 15435:2008 Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance
  • BS ISO 21278-2:2008 Equipment for crop protection - Induction hoppers - General requirements and performance limits

American National Standards Institute (ANSI), storage modulus and

American Society of Mechanical Engineers (ASME), storage modulus and

  • PTC 53-2022 Mechanical and Thermal Energy Storage Systems
  • ASME B94.17-1987 Gages - Functional, ball-lock punches, die buttons, and retainers
  • ASME B94.17.1-1977 Gages - Functional, ball-lock punches, die buttons, and retainers (Metric)
  • ASME PTC 53-2018 Mechanical and Thermal Energy Storage Systems (Draft Standard for Trial Use)

Standard Association of Australia (SAA), storage modulus and

Indonesia Standards, storage modulus and

CN-QIYE, storage modulus and

  • Q/GDW 1890-2013 Technical specification for intelligent storage system for measurement
  • Q/GDW 11364-2014 Technical specification for measurement performance testing of analog input merging unit

Professional Standard - Electron, storage modulus and

  • SJ/T 11812.1-2022 Performance specifications for lithium-ion cells and batteries for distributed energy storage Part 1: Home energy storage

HU-MSZT, storage modulus and

European Committee for Standardization (CEN), storage modulus and

  • EN 15332:2007 Heating boilers - Energy assessment of hot water storage systems
  • EN 15316-5:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling)@ Module M3-7@ M8-7
  • prEN 15316-5 rev Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7
  • EN 15316-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression@ Module M3-1@ M3-4@ M3-9@ M8-1@ M8-4
  • EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals - Blow moulded or rotationally moulded polyethylene tanks - Requirements and test methods
  • EN 15378-3:2017 Energy performance of buildings - Heating and DHW systems in buildings - Part 3: Measured energy performance@ Module M3-10@ M8-10
  • EN 15217:2007 Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings
  • EN 1987-1:1997 Electrically Propelled Road Vehicles - Specific Requirements for Safety - Part 1: On Board Energy Storage
  • EN ISO 25745-1:2012 Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement and verification
  • EN 15603:2008 Energy performance of buildings - Overall energy use and definition of energy ratings
  • EN 12817:2010 LPG Equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m3
  • EN 15316-3:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 3: Space distribution systems (DHW@ heating and cooling)@ Module M3-6@ M4-6@ M8-6

Japanese Industrial Standards Committee (JISC), storage modulus and

  • JIS C 9807:1999 Methods for measuring the performance of electric storage water-heaters for household purposes
  • JIS C 8912:1998 Solar simulators for crystalline solar cells and modules
  • JIS C 8915:1998 Measuring methods of spectral response for crystalline solar cells and modules
  • JIS C 8912 AMD 1:2005 Solar simulators for crystalline solar cells and modules (Amendment 1)
  • JIS C 8933 AMD 2:2011 Solar simulators for amorphous solar cells and modules (Amendment 2)
  • JIS C 8912 AMD 2:2011 Solar simulators for crystalline solar cells and modules (Amendment 2)
  • JIS C 8946:2009 Outdoor measuring method of output power for multi-junction solar cells and modules
  • JIS C 8942:2009 Solar simulator for multi-junction solar cells and modules
  • JIS C 8933 AMD 1:2005 Solar simulators for amorphous solar cells and modules (Amendment 1)
  • JIS B 5031:2003 Die sets for press dies -- Accuracy and measuring method
  • JIS C 1111:2006 Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals
  • JIS C 8915 AMD 1:2005 Measuring methods of spectral response for crystalline solar cells and modules (Amendment 1)

Danish Standards Foundation, storage modulus and

  • DS/EN 60379:2004 Methods for measuring the performance of electric storage water-heaters for household purposes
  • DS/EN 15332:2007 Heating boilers - Energy assessment of hot water storage systems
  • DS/ISO 23400:2021 Guidelines for the determination of organic carbon and nitrogen stocks and their variations in mineral soils at field scale
  • DS/EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating
  • DS/ISO/IEC TR 14143-4:2003 Information technology - Software measurement - Functional size measurement - Part 4: Reference model
  • DS/ISO 5596:1989 Hydraulic fluid power. Gas-loaded accumulators with separators. Range of pressures and volumes, characteristic quantities and identification
  • DS/IEC/TS 62654:2012 Network-based energy consumption measurement - Energy saving system - Conceptual model
  • DS/INSTA 610:1987 Safe-storage units. Testing and evaluation of burglary resistance
  • DS/ISO/IEC 29881:2010 Information technology - Systems and software engineering - FiSMA 1.1 functional size measurement method
  • DS/ISO/IEC 19761:2011 Software engineering - COSMIC: a functional size measurement method
  • DS/EN 1987-1:1998 Electrically propelled road vehicles - Specific requirements for safety - Part 1: On board energy storage
  • DS/EN 50350:2004 Charging control systems for household electric room heating of the storage type - Methods for measuring performance
  • DS/EN 13271/AC:2003 Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints
  • DS/EN 13271:2003 Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints
  • DS/EN 61237-4:1998 Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements
  • DS/ISO/IEC 20926:2010 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
  • DS/EN 843-2:2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio
  • DS/EN 12977-4:2012 Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores
  • DS/EN 15435:2009 Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance
  • DS/EN 15435/ZA:2008 Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance

AENOR, storage modulus and

  • UNE-EN 60379:2005 Methods for measuring the performance of electric storage water-heaters for household purposes
  • UNE-EN 15332:2008 Heating boilers - Energy assessment of hot water storage systems
  • UNE-EN 61853-2:2017 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
  • UNE-EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating -- Part 1: Irradiance and temperature performance measurements and power rating
  • UNE-EN 50350:2005 Charging control systems for household electric room heating of the storage type - Methods for measuring performance
  • UNE-ISO/IEC 19761:2004 Software engineering -- COSMIC-FFP -- A functional size measurement method.
  • UNE-EN 12977-4:2012 Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores
  • UNE-EN 15435:2009 Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance

Lithuanian Standards Office , storage modulus and

  • LST EN 15332-2008 Heating boilers - Energy assessment of hot water storage systems
  • LST EN 61853-1-2011 Photovoltaic (PV) module performance testing and energy rating -- Part 1: Irradiance and temperature performance measurements and power rating (IEC 61853-1:2011)
  • LST EN 60379-2004 Methods for measuring the performance of electric storage water-heaters for household purposes (IEC 60379:1987, modified)
  • LST ISO 11223:2007 Petroleum and liquid petroleum products - Direct static measurements - Measurement of content of vertical storage tanks by hydrostatic tank gauging (identical ISO 11223:2004)
  • LST EN 1987-1-2002 Electrically propelled road vehicles - Specific requirements for safety - Part 1: On board energy storage
  • LST EN 13271-2002 Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints
  • LST EN 13271-2002/AC-2004 Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints
  • LST EN 843-2-2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio
  • LST EN 12977-4-2012 Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores
  • LST EN 50350-2004 Charging control systems for household electric room heating of the storage type. Methods for measuring performance
  • LST EN 15435-2008 Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance

CEN - European Committee for Standardization, storage modulus and

  • PREN 15332-2017 Heating boilers - Energy assessment of hot water storage systems
  • EN 16798-15:2017 Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage
  • EN 13575:2004 Thermoplastic tanks made from blow or rotational moulded polyethylene - Tanks for the above ground storage of chemicals - Requirements and test methods

ES-UNE, storage modulus and

  • EN IEC 60379:2023 Methods for measuring the performance of electric storage water heaters for household purposes
  • UNE-ISO 10716:2019 Paper and board. Determination of alkali reserve
  • UNE-EN 16798-15:2018 Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage
  • UNE-EN 15316-5:2019 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7
  • UNE-EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems (Endorsed by Asociación Española de Normalización in April of 2020.)
  • UNE-EN IEC 61853-3:2018 Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating of PV modules (Endorsed by Asociación Española de Normalización in December of 2018.)
  • UNE-EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation (Endorsed by Asociación Española de Norma...
  • UNE-EN 843-2:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio (Endorsed by AENOR in January of 2007.)
  • UNE-EN 61237-4:1997 BROADCAST VIDEO TAPE RECORDERS. METHODS OF MEASUREMENT. PART 4: ANALOGUE AUDIO PERFORMANCE MEASUREMENTS. (Endorsed by AENOR in November of 2001.)
  • UNE-EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (Endorsed by Asociación...

European Committee for Electrotechnical Standardization(CENELEC), storage modulus and

  • EN 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
  • EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
  • EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
  • EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation

IETF - Internet Engineering Task Force, storage modulus and

  • RFC 7398-2015 A Reference Path and Measurement Points for Large‐Scale Measurement of Broadband Performance

KR-KS, storage modulus and

  • KS C IEC TS 62933-3-1-2020 Electrical energy storage(EES) systems —Part 3-1: Planning and performance assessment of electrical energy storage systems — General specification
  • KS C 8547-2017(英文版) Redox flow battery for use in energy storage system — Performance and safety tests
  • KS C IEC 62282-8-102-2023 Fuel cell technologies — Part 8-102: Energy storage systems using fuel cell modules in reverse mode — Test procedures for the performance of single cells and stacks with proton exchange membranes, inc
  • KS M ISO 4266-6-2003(2023)

RU-GOST R, storage modulus and

  • GOST R 56448-2015 Gas, gas condensate, oil, gas and condensate deposits. Software for geological reservoir modeling. The main functional and technical requirements
  • GOST R 58092.1-2021 Electric Energy Storage (ESS) Systems. Terms and definitions
  • GOST 33868-2016 Energy efficiency. Water heaters and hot water storage tanks. Indicators of energy efficiency and determination methods
  • GOST R 25645.159-1994 Sporadic electron fluxes in near-earth space. Model of spatial-time and energy distribution
  • GOST 25645.139-1986 Natural radiation belts of Earth. Model of spatial and energy distribution of electron flux
  • GOST R 56428-2015 Network-based energy consumption measurement. Energy saving system. Conceptual model
  • GOST R 25645.165-2001 Solar energetic particles. Probabilistic model for proton fluxes

ETSI - European Telecommunications Standards Institute, storage modulus and

  • GS OEU 016-2019 Energy Consumption Measurement of Operational Information Technology Storage Units (V1.1.1)
  • TR 103 395-2016 Smart Body Area Network (SmartBAN); Measurements and modelling of SmartBAN Radio Frequency (RF) environment (V1.1.1)

International Telecommunication Union (ITU), storage modulus and

  • ITU-T L Supplement 41-2021 Requirements on energy efficiency measurement models and the role of artificial intelligence and big data
  • ITU-R REPORT P.2090-2006 Measuring the input parameters for the radiative energy transfer model of vegetation attenuation

GOSTR, storage modulus and

National Metrological Technical Specifications of the People's Republic of China, storage modulus and

  • JJF 1261.16-2017 Rules of Metrology Testing for Energy Efficiency of Electric Storage Water Heaters
  • JJF 1261.16-2015 Rules of Metrology Testing for Energy Efficiency Label of Electrical Storage Water Heaters

International Organization for Standardization (ISO), storage modulus and

  • ISO 10716:2022 Paper and board — Determination of alkali reserve
  • ISO 5596:1982 Hydraulic fluid power; Gas-loaded accumulators with separators; Range of pressures and volumes, characteristic quantities and identification
  • ISO 6721:1983 Plastics; Determination of damping properties and complex modulus by bending vibration
  • ISO/IEC PRF 25059 Software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality model for AI systems
  • ISO/IEC 25059:2023 Software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality model for AI systems
  • ISO 4266-1:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks
  • ISO 4266-4:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks
  • ISO 16343:2013 Energy performance of buildings.Methods for expressing energy performance and for energy certification of buildings
  • ISO/CD 4266-6:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)
  • ISO/CD 4266-3:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)
  • ISO/TR 27915:2017 Carbon dioxide capture, transportation and geological storage — Quantification and verification
  • ISO 4112:1979 Cereals and pulses — Measurement of the temperature of grain stored in silos

国家市场监督管理总局、中国国家标准化管理委员会, storage modulus and

  • GB/T 38116-2019 Low-voltage docking connectors for removable energy storage units
  • GB/T 39018-2020 Intelligent lighting equipment—Non-active mode power measurement
  • GB/T 37780-2019 Test method for elastic modulus,shear modulus and Poisson's ratio of glass

Taiwan Provincial Standard of the People's Republic of China, storage modulus and

  • CNS 14181-1998 Measurement methods for the performance of analog video laser transmitter and receiver modules used for optical fiber communication
  • CNS 14178-1998 Measurement methods for the performance of digital transmitter and receiver modules used for optical fiber communication
  • CNS 14139-1998 Measurement methods for the performance of transmitter and receiver modules used for wireless infrared communication

SE-SIS, storage modulus and

FI-SFS, storage modulus and

  • SFS 8981-1986 In case of interpretation disputes the Finnish text applies
  • SFS 8982-1986 In case of interpretation disputes the Finnish text applies
  • SFS 8983-1986 In case of interpretation disputes the Finnish text applies

Professional Standard - Electricity, storage modulus and

  • DL/T 1783-2017 Application Model of IEC 61850 Engineering Electric Energy Metering

VDE - VDE Verlag GmbH@ Berlin@ Germany, storage modulus and

European Telecommunications Standards Institute (ETSI), storage modulus and

  • ETSI TR 103395 V 1.1.2-2021 Smart Body Area Network (SmartBAN) - Measurements and modelling of SmartBAN Radio Frequency (RF) environment
  • ETSI TR 103 395-2021 Smart Body Area Network (SmartBAN); Measurements and modelling of SmartBAN Radio Frequency (RF) environment (V1.1.2)
  • ETSI TR 103 395-2016 Smart Body Area Network (SmartBAN); Measurements and modelling of SmartBAN Radio Frequency (RF) environment (V1.1.1)

United States Navy, storage modulus and

未注明发布机构, storage modulus and

  • BS EN IEC 62282-8-301:2023 Fuel cell technologies Part 8 - 301 : Energy storage systems using fuel cell modules in reverse mode — Power - to - methane energy systems based on solid oxide cells including reversible operation — Performance test methods
  • GJB 4190-2001 Computer storage mode for geostationary meteorological satellite and weather radar data

PL-PKN, storage modulus and

  • PN H11082-1991 Pattern materials for the lost wax process.Measurement of the mechanical properties
  • PN T06500-08-1985 Electronic measuring instruments Packing, storage and transport
  • PN F06010-05-1990 School and nursery school furniture Furniture for storage Basic functional dimensions
  • PN-EN 12977-4-2018-06 P Thermal solar systems and components -- Custom built systems -- Part 4: Performance test methods for solar combistores
  • PN-EN 12977-4-2018-06/Ap1-2021-09 E Thermal solar systems and components -- Custom built systems -- Part 4: Performance test methods for solar combistores

CZ-CSN, storage modulus and

  • CSN 73 0541-1974 Testing of thermal storage properties of building elements and construction parts
  • CSN 36 1061-21-1996 Methods to be u?ed for measuring energy consumption of thermal storage water heaters and for the purpose of informing consumers of it
  • CSN 36 8440-1985 Magnetic tapes for analogue sound recording. Methods of measurement of electroacoustical properties.

Professional Standard - Energy, storage modulus and

  • DL/T 2246.8-2021 Electrochemical Energy Storage Power Station Grid-connected Operation and Control Technical Specifications Part 8: Simulation Modeling

Institute of Electrical and Electronics Engineers (IEEE), storage modulus and

  • IEEE 269-2019 Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets
  • IEEE 269-2010 Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets
  • IEEE Std 269-1992 IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets
  • NFPA (Fire) 111 Standard on Stored Electrical Energy Emergency and Standby Power Systems, 2022 Edition
  • IEEE 1076.1.1-2004 VHDL analog and mixed-signal extensions - Packages for multiple energy domain support
  • IEEE P2430/D2, August 2018 IEEE Draft Standard for Software Nonfunctional Sizing Measurement
  • ISO/IEC/IEEE P32430/CD, September 2022 IEEE Draft Standard for Software Non-Functional Sizing Measurements
  • IEEE 2430-2019 IEEE Trial-Use Standard for Software Non-Functional Sizing Measurements
  • IEEE P32430 IEEE Draft Standard for Software Non-Functional Sizing Measurements
  • IEEE Std 2430-2019 IEEE Trial-Use Standard for Software Non-Functional Sizing Measurements
  • IEEE Std 1076.1.1-2011 IEEE Standard for VHDL Analog and Mixed-Signal Extensions -- Packages for Multiple Energy Domain Support - Redline
  • IEEE Std 269-2002 IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets
  • IEEE Std 1076.1.1-2004 IEEE Standard VHDL Analog and Mixed-Signal Extensions---Packages for Multiple Energy Domain Support
  • IEEE Std 269-2010 IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets - Redline

NZ-SNZ, storage modulus and

  • AS/NZS 4755-3-3:2014 Demand response capabilities and supporting technologies for electrical products Part 3.3: Interaction of demand response enabling devices and electrical products-Operational instructions and connections for electric storage and electric-boosted storage w

IEC - International Electrotechnical Commission, storage modulus and

  • TS 62654-2012 Network-based energy consumption measurement – Energy saving system – Conceptual model (Edition 1.0)

工业和信息化部, storage modulus and

  • SJ/T 11620-2016 FiSMA1.1 Functional Size Measurement Method for Information Technology Software and Systems Engineering
  • SJ/T 11617-2016 Software Engineering COSMIC-FFP A functional size measurement method
  • JB/T 13618-2019 Energy efficiency limits and energy efficiency grades of feed ring die pellet mills

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), storage modulus and

  • ARI 1200-2008 Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), storage modulus and

  • AHRI 1201 SI-2013 Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets
  • AHRI 1200 I-P-2013 Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets

Underwriters Laboratories (UL), storage modulus and

  • UL SUBJECT 9540-2014 UL Standard for Safety Outline of Investigation for Energy Storage Systems and Equipment

Association of German Mechanical Engineers, storage modulus and

Military Standard of the People's Republic of China-General Armament Department, storage modulus and

  • GJB 9562-2018 Simulated field neutron spectrum and fluence measurement methods for radiation-resistant reinforcement: Threshold detector method

Professional Standard - Aviation, storage modulus and

  • HB 5350.2-2004 Test method for properties of investment casting pattern materials-Part 2:Determination of thermal deformation and thermal stability
  • HB 7504.4-1997 Aircraft weight and moment of inertia data requirements for flight simulator design and performance

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, storage modulus and

  • REPORT P.2090-2006 Measuring the input parameters for the radiative energy transfer model of vegetation attenuation

TIA - Telecommunications Industry Association, storage modulus and

  • TSB78-1996 Land Mobile Linear Analog Modulation Communications Equipment Measurement and Performance Standards

National Metrological Verification Regulations of the People's Republic of China, storage modulus and

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., storage modulus and

  • IEEE 269-2002 Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets@ Handsets@ and Headsets
  • IEEE 1076.1.1-2011 VHDL Analog and Mixed-Signal Extensions—Packages for Multiple Energy Domain Support (IEEE Computer Society)

ESDU - Engineering Sciences Data Unit, storage modulus and

  • SPG-M15-2-2010 Refinery preheat train modelling@ simulation and performance improvement

American Society of Civil Engineers (ASCE), storage modulus and

EEMUA - Engineering Equipment and Materials Users Association, storage modulus and

  • PUB NO 213-2012 Emission reduction from oil storage tanks and loading operations (Edition 1)

BR-ABNT, storage modulus and

  • ABNT NBR 14867-2011 Storage of flammable and combustible liquids - Metallic flexible pipe - Performance requirements

RO-ASRO, storage modulus and

Professional Standard - Textile, storage modulus and

  • FZ/T 50046-2019 Test method for tensile properties of single fiber of high modulus fiber

AASHTO - American Association of State Highway and Transportation Officials, storage modulus and

IN-BIS, storage modulus and

Professional Standard - Building Materials, storage modulus and

  • JC/T 678-1997 Test method for Young's modulus,shear modulus and Poisson's ratio of glass material

Zhejiang Provincial Standard of the People's Republic of China, storage modulus and

  • DB33/T 2358-2021 Classification of comprehensive energy consumption and carbon dioxide emissions in green storage




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved