ZH
RU
ES
Resin curing degree test
Resin curing degree test, Total:234 items.
In the international standard classification, Resin curing degree test involves: Plastics, Construction materials, Materials for aerospace construction, Raw materials for rubber and plastics, Processes of the textile industry, Products of the chemical industry, Organic chemicals, Analytical chemistry, Road vehicles in general, Wood-based panels, Reinforced plastics, Pipeline components and pipelines, Adhesives, Paint ingredients, Laboratory medicine, Paints and varnishes, Insulating materials, Thermodynamics and temperature measurements, Lubricants, industrial oils and related products, Milk and milk products, Dentistry.
Indonesia Standards, Resin curing degree test
CZ-CSN, Resin curing degree test
- CSN 64 0341-1990 Plastics. Termosetting casting resins. etermination of temperature increa- e of epoxy resins during curing
- CSN 64 0810-1983 Testing ol plastics. Dctermination moulding properties of thermosetingresins on the plastometer KK
- CSN 64 0342-1990 1'lastics. 'JVrrriosetting easting resins. Jetcrinination of viscosity incrrnso of joxy resms (hiriiig cm-hig
- CSN 64 1301-1971 Epoxide resins. Testing and technical delivery code
- CSN 46 7013 Cast.4/4-1977 Testing methods for fodder mixtures. Chemical tests. Determination of fat acidity number
PL-PKN, Resin curing degree test
- PN C89085-24-1988 Epoxy resins Methóds of testing Determination of properties of cured resins
- PN C89082-17-1988 Unsaturated polyester resins Methods of testing Determination of properties of cured resins
- PN C89085-06-1986 Epoxy resins Methods of testing Determination of viscosity
- PN C89085-03-1987 Epoxy resins Methods of testing Determination of density (specific gravity)
- PN C89085-21-1988 Epoxy resins Methods of testing Determination of the peak temperatur?
- PN C89085-20-1988 Epoxy rcsins Mcthods ol testing Determination ol pot time of resin alter mixing with hardener
- PN C89082-04-1986 Unsaturated polyester resins Methods of testing Determination of yiscosity
- PN C89085-05-1988 Epoxy resins Methods of testing Determination of tendency to crystallize
- PN C89085-15-1987 Epoxy resins Methods of testing Determination of easily saponifiable chlorine content
- PN C89082-03-1986 Unsaturated polyester resins Methods of testing Determination of density (specific gravity)
- PN C89085-19-1987 Epoxy resins Methods of testing Determination of gel time after mixing with hardener
- PN C89402-1992 Plastics. Resins in the liquid state or as emulsions or dispersions. Determination kof apparent viscosity by the Brookfield test method
Korean Agency for Technology and Standards (KATS), Resin curing degree test
- KS M 3822-2008 Testing methods for viscosity of epoxide resins and hardners
- KS M 3822-1987 Testing methods for viscosity of epoxide resins and hardners
- KS M 3829-2003(2018)
- KS M 3821-2008 Testing methods for specific gravity of epoxide resins and hardeners
- KS M 3820-2011 General rules for testing methods of epoxide resins and hardeners
- KS M 3821-1987 Testing methods for specific gravity of epoxide resins and hardeners
- KS K 0717-2005 TESTING METHOD FOR COLOUR FASTNESS TO RESIN FINISH
- KS M 3823-2008(2018) Testing methods for softening point of epoxide resins
- KS M 3822-2008(2018) Testing methods for viscosity of epoxide resins and hardners
- KS M 3829-2003 Testing methods for total amine values of amine－based hardeners of epoxide resins
- KS M 3821-2008(2018) Testing methods for specific gravity of epoxide resins and hardeners
- KS M 3820-2016 General rules for testing methods of epoxide resins and hardeners
- KS M ISO 7327:2010 Plastics－Hardeners and accelerators for epoxide resins－Determination of free acid in acid anhydride
- KS F 2419-2007 Standard test method for making polyester resin concrete specimens for strength test
- KS M ISO 8987:2010 Plastics-Phenolic resins-Determination of reactivity on a B-transformation test plate
- KS M ISO 8987:2016 Plastics－Phenolic resins－Determination of reactivity on a B-transformation test plate
- KS F 2427-2010 Standard test method for determining the consistency of fresh concrete by Vebe test
- KS F 2427-1985 Standard test method for determining the consistency of fresh concrete by Vebe test
- KS F 2483-2014 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
- KS C IEC 60455-2:2020 Resin based reactive compounds used for electrical insulation —Part 2: Methods of test
RU-GOST R, Resin curing degree test
- GOST 21970-2015 Unsaturated polyester resins. Methods for determination of maximum temperature during the setting
- GOST 22349-1977 Setting casting resins. Preparation of test specimens
- GOST 32716-2014 Facing material based on impregnated papers with a deep degree or resin cure. Specifications
- GOST R 57694-2017 Polymer composites. Method for determination of curing characteristics of thermosetting resins
- GOST R 57571-2017 Hardeners for epoxide resins. Determination of primary, secondary and tertiary amine group nitrogen content
- GOST R 55923-2013 Facing material based on impregnated papers with a deep degree or resin cure. Specificafications
- GOST R 56818-2015 Polymer composites. Determination of chemical resistance of thermosetting resins
- GOST 25523-1982 Epoxy anhydride hardeners. Methods for determination of total acid number of acid and their relation
- GOST 21970-1976 Unsaturated polyester resins. Methods for determination of the maximum temperature during the setting
- GOST R 57697-2017 Polymer composites. Method for determination of curing properties of pultrusion resins by thermal analysis
- GOST R 57917-2017 Polymer composites. Determination of dynamic viscosity of thermosetting resins by the sinusoidal method
British Standards Institution (BSI), Resin curing degree test
- BS ISO 4216:2021 Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
- BS 6319-5:1984 Testing of resin and polymer/cement compositions for use in construction - Methods for determination of density of hardened resin compositions
- 20/30412517 DC BS ISO 4216. Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
- BS EN ISO 9771:1997 Plastics. Phenolic resins. Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
- BS EN ISO 8987:2005 Plastics. Phenolic resins. Determination of reactivity on aB-transformat ion test plate
- BS EN ISO 7327:1996 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride
- BS 2782-6 Method 621D:1978 Methods of testing plastics. Dimensional properties. Determination of compacted apparent bulk density of PVC resins
- BS EN IEC 60455-2:2023 Resin based reactive compounds used for electrical insulation - Methods of test
- BS 6319-7:1985 Testing of resin and polymer/cement compositions for use in construction - Method for measurement of tensile strength
- BS EN ISO 11668:2001 Binders for paints and varnishes. Chlorinated polymerization resins. General methods of test
- BS EN ISO 15252-2:2000 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Preparation of test specimens and determination of properties
- BS 6319-2:1983 Testing of resin and polymer/cement compositions for use in construction - Method for measurement of compressive strength
- BS EN 60455-2:2015 Tracked Changes. Resin based reactive compounds used for electrical insulation. Methods of test
- BS 2782-7 Method 732B:1991 Methods of testing plastics - Rheological properties - Determination of viscosity number of poly(vinyl chloride) resins
- BS 2782-4 Method 433A:1979 Methods of testing plastics. Chemical properties. Determination of inorganic chlorine in epoxide resins and glycidyl esters
- BS EN 12390-2:2019 Tracked Changes. Testing hardened concrete. Making and curing specimens for strength tests
- BS 6782-16.3:2000 Binders for paints - Methods of test for alkyd resins - Determination of unsaponifiable matter content
- BS 5664-2.2:1988 Solventless polymerisable resinous compounds used for electrical insulation. Methods of test.. Coating powders
Professional Standard - Aerospace, Resin curing degree test
- QJ 1708-1989 Dielectric Test Method for Resin Curing Process
- QJ 2508-1993 Method for Determination of Curing Reaction of Epoxy Resin System by DSC
SAE - SAE International, Resin curing degree test
- SAE AMS3699A-1992 Resin System@ Epoxy@ Carbon Microballoon Filled 135 Degrees C (275 Degrees F) Cure
- SAE AMS3135D-1984 Coating Material@ Silicone Resin 205 Degrees C (400 Degrees F) Cure
- SAE AMS3376C-2015 Sealing Compound@ Non-Curing@ Fluorosilicone Groove Injection Temperature and Fuel Resistant
- SAE AMS3733C-2015 Potting Compound@ Epoxy Two Part@ Highly Filled@ Heat Cure@ High Compressive Strength
International Organization for Standardization (ISO), Resin curing degree test
- ISO 4216:2021 Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
- ISO 7327:1994 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride
- ISO 8987:2005 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate
- ISO 8987:1995 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate
German Institute for Standardization, Resin curing degree test
- DIN 16945:1989-03 Testing of resins, hardeners and accelerators, and catalyzed resins
- DIN 54407:2015 Testing of ion exchange resins - Determination of bead size distribution
- DIN 54407:2003 Testing of ion exchange resins - Determination of bead size distribution
- DIN EN ISO 7327:1997 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994); German version EN ISO 7327:1997
- DIN 53180:1996 Binders for paints and varnishes - Determination of the softening temperature of resins
- DIN EN ISO 9771:1997-05 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997
- DIN 65467:1999 Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method
- DIN EN ISO 7327:1997-11 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994); German version EN ISO 7327:1997
- DIN 65467:1999-03 Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method
- DIN EN ISO 8987:2005 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005); English version of DIN EN ISO 8987:2005
- DIN EN ISO 11668:2001-12 Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997); German version EN ISO 11668:2001
Society of Automotive Engineers (SAE), Resin curing degree test
- SAE AMS3699A-1993 (Noncurrent)Resin System, Epoxy, Carbon Microballoon Filled 135 Degrees C (275 Degrees F) Cure
- SAE AMS3372A-2001 Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure
- SAE AMS3372-1969 SILICONE RESIN, ELASTOMERIC High Tear Strength, Elevated Temperature Cure
- SAE AMS3135E-2001 (Noncurrent)Coating Material, Silicone Resin 205 Degrees C (400 Degrees F) Cure
- SAE AMS3733A-2011 POTTING COMPOUND, EPOXY Two Part, Highly Filled, Heat Cure, High Compressive Strength
- SAE AMS3733-1987 POTTING COMPOUND, EPOXY Two Part, Highly Filled, Heat Cure, High Compressive Strength
- SAE AMS3733B-1993 (Noncurrent)Potting Compound, Epoxy Two Part, Highly Filled, Heat Cure, High Compressive Strength
Japanese Industrial Standards Committee (JISC), Resin curing degree test
- JIS K 7233:1986 Testing methods for viscosity of epoxide resins and hardeners
- JIS K 7234:1986 Testing methods for softening point of epoxide resins
- JIS K 7231:1986 General rules for testing methods of epoxide resins and hardeners
- JIS K 7232:1986 Testing methods for specific gravity of epoxide resins and hardeners
- JIS A 1183:1995 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
Association Francaise de Normalisation, Resin curing degree test
- NF EN ISO 3673-2:2012 Plastiques - Résines époxydes - Partie 2 : préparation des éprouvettes et détermination des propriétés des résines époxydes réticulées
- NF T51-437:1985 Plastics. Solid phenolic resins. Determination of softening point
- NF T51-425:1983 Plastics. Liquid and solid phenolic resins. Measurement of density.
- NF T51-435:1985 Plastics. Solid phenolic resins. Determination of melting range by the capillary tube method.
- NF EN ISO 9702:1998 Plastiques - Durcisseurs pour résines époxy - Détermination de la teneur en azote des groupes amine primaire, secondaire, tertiaire.
- XP PR EN 2833-2:1995 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 2 : verre textile/résine époxy préimprégnée avec une température de polymérisation jusqu'à 125 degrés Celsius utilisation co...
- NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
- NF EN 13329/IN2:2021 Revêtements de sol stratifiés - Eléments dont la surface est à base de résines aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essai
- NF EN 13329+A2:2021 Revêtements de sol stratifiés - Eléments dont la surface est à base de résines aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essai
- NF EN 13329/IN1:2017 Revêtements de sol stratifiés - Éléments dont la surface est à base de résines aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essai
- NF EN ISO 11668:2002 Liants pour peintures et vernis - Résines polymérisées chlorées - Méthodes générales d'essai
- NF T57-603:2011 Fiber reinforced plastics - Prepreg - Determination of the conventional resin flow rate parallel to the folds.
- NF T51-428*NF EN ISO 8987:2006 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate
- NF C26-162*NF EN 60455-2:2016 Resin based reactive compounds used for electrical insulation - Part 2 : methods of test
- NF EN 50655-1:2017 Câbles électriques - Accessoires - Caractérisation des matériaux - Partie 1 : essais d'identification pour les composés résineux
- NF T60-176:1994 Produits de protection temporaire contre la corrosion - Essai de tachage - Résinification de courte durée, sur plaques empilées
- NF A11-102:1977 Chemical analysis of ferroniobium.Spectrophotometric determination of niobium after separation on ion exchange resins.
American Society for Testing and Materials (ASTM), Resin curing degree test
- ASTM D4640-86(1996) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
- ASTM D4640-86(2009) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
- ASTM D4640-86(2001) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
- ASTM D4640-86(2017) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
- ASTM D2566-86 Test Method for Linear Shrinkage of Cured Thermosetting Casting Resins During Cure
- ASTM D4640-86(2022) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
- ASTM D5028-96(2003)e1 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
- ASTM D5028-96 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
- ASTM D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
- ASTM D5028-96(2003) Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
- ASTM D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
- ASTM D2584-68 Standard Method Of Test For Ignition Loss Of Cured Reinforced Resins
- ASTM D2584-08 Standard Test Method for Ignition Loss of Cured Reinforced Resins
- ASTM D2584-68(1979)e1 Standard Test Method for Ignition Loss Of Cured Reinforced Resins
- ASTM D2584-11 Standard Test Method for Ignition Loss of Cured Reinforced Resins
- ASTM D2584-68(1985) Standard Test Method for Ignition Loss of Cured Reinforced Resins
- ASTM D2584-18 Standard Test Method for Ignition Loss of Cured Reinforced Resins
- ASTM D2584-02 Standard Test Method for Ignition Loss of Cured Reinforced Resins
- ASTM D2584-94 Standard Test Method for Ignition Loss of Cured Reinforced Resins
- ASTM D3532-99(2009) Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
- ASTM D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
- ASTM E1118/E1118M-16 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
- ASTM E1118/E1118M-16(2020) Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
- ASTM C308-00 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
- ASTM C308-00(2005) Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
- ASTM D6493-11(2022) Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
- ASTM D7750-12(2017) Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
- ASTM D6493-11 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
- ASTM D6493-11(2015) Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
- ASTM E28-99(2009) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
- ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
- ASTM E28-18(2022) Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
- ASTM D6090-99(2004) Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
- ASTM D6090-99(2008) Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
- ASTM D7750-12 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
- ASTM D4398-95 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
- ASTM D4398-02 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
- ASTM D4398-07 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
- ASTM D5062-96(2001) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
- ASTM D5062-09 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
- ASTM D6493-99 Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
- ASTM D5062-96 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
- ASTM D5062-09(2017) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
- ASTM D5062-09(2020) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
- ASTM E28-99 Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
- ASTM E28-99(2004) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
- ASTM C308-00(2012)e1 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
- ASTM D6493-05 Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
- ASTM D6493-05(2010) Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
- ASTM E28-14 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
- ASTM D3681-01e1 Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
- ASTM D3681-96 Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
- ASTM D3681-01 Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
- ASTM D6038-21 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)
- ASTM D6038-96 Standard Test Method for Determining the Compatability of Resin/Solvent Mixtures by Precipitation Temperature
- ASTM D6604-00(2009)e1 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
PT-IPQ, Resin curing degree test
Professional Standard - Ferrous Metallurgy, Resin curing degree test
- YB/T 5095-2005 Determination of acidity or alkalinity of solid coumarone-indene resin
工业和信息化部, Resin curing degree test
- YB/T 5095-2016 Method for determination of pH of solid coumaron-indene resin
Taiwan Provincial Standard of the People's Republic of China, Resin curing degree test
- CNS 13065-1992 Methods of Test for Viscosity of Epoxy Resins and Hardeners
The American Road & Transportation Builders Association, Resin curing degree test
Professional Standard - Aviation, Resin curing degree test
- HB 7614-1998 Differential Scanning Calorimetry (DSC) Test Method for Degree of Curing of Composite Resin Matrix
- HB 7615-1998 High performance liquid chromatographic analysis method for composite resin matrix components and pre-curing degree
American National Standards Institute （ANSI), Resin curing degree test
- ANSI/ASTM D2471:1999 Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02)
- ANSI/ASTM D4398:2007 Test Method for Determining the Chemical Resistance of Fiberglas-Reinforced Thermosetting Resins by One-Side Panel Exposure
- ANSI/ASTM D2538:1995 Test Method for Fusion of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer (08.02)
- ANSI/ASTM D2925:2001 Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
- ANSI/ASTM D3681:2012 Test Method for Chemical Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
GM North America, Resin curing degree test
Military Standard of the People's Republic of China-General Armament Department, Resin curing degree test
- GJB 1059.1-1990 Phenolic resin test method for ablative materials Solid content test
- GJB 1059.2-1990 Phenolic Resin Test Method for Viscosity Testing of Ablative Materials
- GJB 1059.1A-2020 Test Methods for Phenolic Resins for Ablative Materials Part 1: Solids Content Test
- GJB 1059.2A-2020 Test Methods for Phenolic Resins for Ablative Materials Part 2: Viscosity Test
Guangdong Provincial Standard of the People's Republic of China, Resin curing degree test
- DB44/T 2045-2017 Determination of Glass Transition Temperature of Synthetic Resin Emulsion
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Resin curing degree test
- GB/T 32675-2016 Plastics.Phenolic resins.Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
- GB/T 14074.7-1993 Test methods for wood adhesives and their resins - Determination of curing time
- GB/T 32788.2-2016 Test method for properties of prepreg.Part 2:Determination for resin flow of prepreg
AENOR, Resin curing degree test
- UNE-EN ISO 9771:1997 PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS (ISO 9771:1995).
- UNE-EN 60455-2:2000 Resin based reactive compounds used for electrical insulation -- Part 2: Methods of test.
- UNE-EN ISO 8987:2006 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005)
Danish Standards Foundation, Resin curing degree test
- DS/EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
- DS/EN 60455-2:1999 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
- DS/EN ISO 8987:2005 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005)
- DS/EN 60893-2:2004 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Resin curing degree test
- PREN 6043-1995 Aerospace Series Thermosetting Resin Systems Test Method Determination of Gel Time and Viscosity (Edition P1)
- PREN 2563-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Test Method - Determination of Apparent Interlaminar Shear Strength (Issue P 1)
Lithuanian Standards Office , Resin curing degree test
- LST EN ISO 9771:2001 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995)
- LST EN ISO 8987:2005 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005)
- LST EN ISO 11668:2002 Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997)
European Committee for Standardization (CEN), Resin curing degree test
- EN ISO 7327:1997 Plastics - Hardeners and Accelerators for Epoxide Resins - Determination of Free Acid in Acid Anhydride
- EN ISO 8987:1995 Plastics - Phenolic Resins - Determination of Reactivity on a B- Transformation Test Plate (ISO 8987 : 1988)
- EN ISO 8987:1998 Plastics - Phenolic Resins - Determination of Reactivity on a B- Transformation Test Plate (ISO 8987 : 1988) ISO 8987:1995
- EN ISO 8987:2005 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005)
未注明发布机构, Resin curing degree test
- BS EN ISO 7327:1997(2000) Plastics — Hardeners and accelerators for epoxide resins — Determination offree acid in acid anhydride
- BS 6319-2:1983(2011) Testing of resin compositions for use in construction — Part 2 : Method for measurement of compressive strength
- BS 6319-7:1985(1999) Testing of resin compositions for use in construction — Part 7 : Method for measurement of tensile strength
Professional Standard - Medicine, Resin curing degree test
IT-UNI, Resin curing degree test
FI-SFS, Resin curing degree test
- SFS-ISO 4586/2 E:1986 Decorative laminates Sheets based on thermosetting resins.Part 2: Determination of properties
- SFS 3242-1976 MUOVIT. LASILUJITTEISTEN, HARTSILLA LIIMATTUJEN LAMINOITUJEN LAATTOJEN TAI LEVYJEN VALMISTUS TESTAUSTA VARTEN
GOSTR, Resin curing degree test
- GOST R 57572-2017 Hardeners and accelerators for epoxide resins. Determination of free acid content in acid anhydride
- GOST R 57995-2017 Composite polymers. Determination of curing behavior of thermosetting resins by dynamic mechanical procedures using a rheometer
RO-ASRO, Resin curing degree test
- STAS 11337/1-1989 POLYESTER RESINS REINFORCED WITH GLASS FIBRES General specifications for strength determination at chemical agents action
- STAS 8351/8-1980 COAL - TAR PITCH Determination of coke (combined carbon) of beta resins and of swelling index
- STAS 11300-1983 SYNTHETIC RESIN INSULATING PARTS FOR INDOOR ELECTRICAL EQUIPMENT Umidity and under condensation test
European Association of Aerospace Industries, Resin curing degree test
- AECMA PREN 2564-1988 Aerospace Series Carbon Fibre Laminates Test Method for the Determination of the Fibre and Resin Fractions and Porosity Content Issue P 1
ES-UNE, Resin curing degree test
- UNE-EN 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test (Endorsed by AENOR in January of 2016.)
Standard Association of Australia （SAA）, Resin curing degree test
- IEC 60455-2:2023 RLV Resin based reactive compounds used for electrical insulation — Part 2: Methods of test
- IEC 60455-2:2023 Resin based reactive compounds used for electrical insulation — Part 2: Methods of test
- AS 2300.2.11:1990 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of density and estimation of solids-not-fat (SNF) - Hydrometer method
Aerospace, Security and Defence Industries Association of Europe (ASD), Resin curing degree test
- ASD-STAN PREN 2563-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Test Method - Determination of Apparent Interlaminar Shear Strength (Issue P 1)
Professional Standard - Chemical Industry, Resin curing degree test
- HG/T 3311-1980 Test method for thermal stability of polyvinyl chloride resin by suspension method (hydrogen chloride water absorption method)
Group Standards of the People's Republic of China, Resin curing degree test
- T/GDAQI 85-2022 Dentistry—Test method for irradiance of powered polymerization activator
KR-KS, Resin curing degree test
- KS C IEC 60455-2-2020 Resin based reactive compounds used for electrical insulation —Part 2: Methods of test