ZH
RU
ES

polystyrene paint

polystyrene paint, Total:499 items.

In the international standard classification, polystyrene paint involves: Plastics, Materials and articles in contact with foodstuffs, Rubber and plastics products, Kitchen equipment, Products of the chemical industry, Analytical chemistry, Construction materials, Organic chemicals, Tobacco, tobacco products and related equipment, Adhesives, Wood-based panels, Raw materials for rubber and plastics, Clothes, Cellular materials, Pipeline components and pipelines, Furniture, Insulating materials, Products of the textile industry, Production in the chemical industry, Equipment for the rubber and plastics industries, Equipment for the chemical industry, Protection of and in buildings, Wastes, Rubber, Packaging materials and accessories, Food products in general, Road engineering, Shipbuilding and marine structures in general, Medical sciences and health care facilities in general, Cans. Tins. Tubes, Cutting tools, Textile fibres, Paint ingredients, Seals, glands.


PL-PKN, polystyrene paint

Group Standards of the People's Republic of China, polystyrene paint

  • T/JSBC 4-2020 Recycled polystyrene compound
  • T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
  • T/CSRA 21-2022 Plastic composition test Polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), ethylene-vinyl acetate copolymer (EVA), polyethylene terephthalate in plastic products Esters (PET) Qualitative Analysis Method
  • T/GZPPIA 01-2018 Polystyrene buoyancy
  • T/ZZB 2752-2022 Styrene for polymerization-specificatioan
  • T/CIPR 064-2022 Styrene-ethylene-ethylene-propylene block copolymer modified foam
  • T/CPPIA 6-2021 Determination of Hexabromocyclododecane in Expanded Polystyrene and Extruded Polystyrene--Gas Chromatography-Mass Spectrometry
  • T/CSRA 7-2021 Limit of styrene volatilization standards for low styrene emission unsaturated polyester resin
  • T/SHPTA 042-2023 Plastics-Halogen free flame retardant impact polystyrene (PS-I) compound
  • T/CASME 47-2022 Polystyrene (PS) prism anti glare plate
  • T/GDC 228-2023 Corrosion-resistant HIPS material for refrigerator liner
  • T/QGCML 666-2023 Technical specifications for the production of polystyrene foam crushing vehicles
  • T/CAMDI 004-2016 Acrylonitrile-butadiene-styrene copolymer (ABS) special material for infusion and blood transfusion equipment
  • T/GDPIA 31-2021 Plastics－Green recycled acrylonitrile-butadiene-styrene (ABS) for air-conditioner
  • T/GDPIA 51-2022 Anti-squeaking PC/ABS material for automotive interiors
  • T/SHPTA 047-2023 Plastics Modified Acrylonitrile Butadiene Styrene（ABS）and its alloy special materials for electrical appliances
  • T/CSTM 00480-2021 Molded polystyrene thermal insulation permanent formwork
  • T/ZZB 1652-2020 Disposable serological pipettes（Polystyrene）
  • T/CPPIA 21-2022 Extruded polystyrene foam(XPS) board for floor heating

US-FCR, polystyrene paint

GM Holden Ltd, polystyrene paint

TR-TSE, polystyrene paint

  • TS 2489-1977 POLYSTYRENE MOULDING MATERIAL
  • TS 340-1966 PLASTICS DETERMINATION OF THE PERCENTAGE OF STYRENE ?N POLYSTYRENE WITH WIJS SOLUTION
  • TS 3423-1979 PLASTICS - DESIGNATION OF IMPACT RESISTANT POLYSTYRENES
  • TS 2610-1977 STYRENE - BUTEDIEN COPOLYMERS - DETERMINATION OF BOUND STYRENE CONTENT
  • TS 2492-1977 PLASTICS DETERMINATION OF RESIDUAL STYRENE MONOMER ?N POLYSTYRENE BY GAS CHROMATOGRAPHY
  • TS 3435-1979 PLASTICS - POLYSTYRENE MOULDING AND EXTRUSION MATERIALS - DESIGNATION

Korean Agency for Technology and Standards (KATS), polystyrene paint

Japanese Industrial Standards Committee (JISC), polystyrene paint

  • JIS K 6870:1995 Polystyrene moulding materials
  • JIS K 6869:2009 Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
  • JIS K 6872:1995 Polystyrene sheets
  • JIS K 6869:1999 Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography
  • JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
  • JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
  • JIS K 6871:1995 Testing methods for polystyrenes
  • JIS Z 1536:1995 Polystyrene foam for package cushioning
  • JIS K 6731:1994 Ethylene/vinyl acetate copolymer materials

TH-TISI, polystyrene paint

  • TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)
  • TIS 2438-2009 Polystyrene foam mattresses
  • TIS 836-1988 Standard for polystyrene resin
  • TIS 655.3-2011 Plastic utensils for food.part 3: acrylonitrile-butadiene-styrene and styrene.acrylonitrile

GM Europe, polystyrene paint

RO-ASRO, polystyrene paint

CZ-CSN, polystyrene paint

GM North America, polystyrene paint

工业和信息化部, polystyrene paint

(U.S.) Ford Automotive Standards, polystyrene paint

国家市场监督管理总局、中国国家标准化管理委员会, polystyrene paint

  • GB/T 40006.6-2021 Plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials
  • GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography
  • GB/T 38286-2019 Polyethylene(PE)，polypropylene(PP) and polystyrene(PS) resin―Determination of peroxide value
  • GB/T 10801.2-2018 Rigid extruded polystyrene foam board for thermal insulation(XPS)
  • GB/T 10801.1-2021 Moulded polystyrene foam for thermal insulation（EPS）
  • GB/T 37388-2019 Solution-polymerized styrene butadiene rubber（SSBR）
  • GB/T 37198-2018 Impact-resistant polystyrene（PS-I）resin

FI-SFS, polystyrene paint

International Organization for Standardization (ISO), polystyrene paint

  • ISO/DIS 2561:1975 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
  • ISO/FDIS 2561:2023 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
  • ISO 2561:2006 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
  • ISO 2561:2012 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
  • ISO 2561:1974 Plastics; Determination of residual styrene monomer in polystyrene by gas chromatography
  • ISO 2897:1976 Plastics — Designation of impact-resistant polystyrenes
  • ISO 2453:1975 Styrene-butadiene copolymers — Determination of bound styrene content
  • ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
  • ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • ISO 1622:1975 Plastics — Polystyrene moulding and extrusion materials — Designation
  • ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
  • ISO 13636:2012 Plastics - Film and sheeting - Non-oriented poly(ethylene terephthalate) (PET) sheets
  • ISO 2897-2:1981 Plastics; Impact-resistant polystyrenes; Part 2 : Determination of properties
  • ISO 4894-1:1979 Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 1: Designation
  • ISO 2897-1:1990 Plastics; impact-resistant polystyrene (SB) moulding and extrusion materials; part 1: designation

U.S. Military Regulations and Norms, polystyrene paint

Professional Standard - Chemical Industry, polystyrene paint

  • HG/T 4998~4999-2016 Oleic acid ethoxylates and tristyrylphenol ethoxylates (2016)
  • HG/T 4669-2014 High impact polystyrene (PS-HI) color masterbatch
  • HG/T 4769.1~4769.4-2014 Test of colorants in pigment and extender plasticized polyvinyl chloride (2014)
  • HG/T 2643-2023 Non-metallic chemical equipment acrylonitrile-butadiene-styrene, polyvinyl chloride, homopolypropylene, polyvinylidene fluoride and glass fiber reinforced polypropylene diaphragm valves
  • HG/T 2737-2023 Non-metallic chemical equipment acrylonitrile-butadiene-styrene, polyvinyl chloride, homopolypropylene, polyvinylidene fluoride and glass fiber reinforced polypropylene ball valves
  • HG/T 4768.3-2014 Pigments and extenders.Assessment of dispersibility in plastics.Part 3: Determination of coloring pigments dispersion in polyethylene by two-roll milling
  • HG/T 4768.4-2014 Pigments and extenders.Assessment of dispersibility in plastics.Part 4: Determination of white pigments dispersion in polyethylene by two-roll milling
  • HG/T 3943-2007 Poly (vinyl chloride) resin-Determination of toluene content

IL-SII, polystyrene paint

AENOR, polystyrene paint

  • UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
  • UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
  • UNE-EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates

Taiwan Provincial Standard of the People's Republic of China, polystyrene paint

IN-BIS, polystyrene paint

British Standards Institution (BSI), polystyrene paint

  • BS ISO 2561:2012 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
  • 23/30428206 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
  • BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
  • BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
  • BS ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
  • BS EN 15342:2007 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates
  • BS ISO 21561-2:2016 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR. FTIR with ATR method
  • 18/30358631 DC BS ISO 2453. Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
  • BS 3241:1960 Specification for toughened polystyrene for sheet extrusion

Professional Standard - Light Industry, polystyrene paint

RU-GOST R, polystyrene paint

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, polystyrene paint

  • GB 12671-1990 Polystyrene resin
  • GB/T 29645-2013 Plastics.Recycled polystyrene compound
  • GB/T 27561-2011 Styrene-butadiene-styrene block copolymers(SBS) adhesives
  • GB/T 12671-2008 Polystyrene(PS)resin
  • GB/T 33094-2016 Plastics.Antistatic impact-resistant polystyrene compound
  • GB/T 24150-2009 Plastics.Flame retardant impact-resistant polystyrene compound
  • GB/T 10801.1-2002 Moulded polystyrene foam board for thermal insulation
  • GB/T 16867-1997 Determination of residual styrene monomer in polystyrene and acrylonitrile-butadiene-styrene resins by gas chromatography
  • GB/T 10801.2-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS)
  • GB/T 31403-2015 Plastics.Acrylonitrile-butadiene-styrene/poly (methyl methacrylate) alloy
  • GB/T 4614-1984 Determination of residual styrene monomer in polystyrene by gas chromatography
  • GB/T 5009.60-1996 Method for analysis of hygienic standard of products of polyethylene, polystyrene and polypropyrene for food packaging
  • GB/T 5009.60-2003 Method for analysis of hygienic standard of products of polyethylene,polystyrene and polypropyrene for food packaging
  • GB/T 16719-1996 Biaxially oriented polystyrene (BOPS) sheet
  • GB/T 16719-2008 Biaxially oriented polystyrene(BOPS)sheet
  • GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings Hot oven test method
  • GB/T 26190-2010 Biaxially oriented polystyrene window film
  • GB/T 26191-2010 Biaxially oriented polystyrene twist film
  • GB/T 30595-2014(英文版) External thermal insulation composite systems based on extruded polystyrene

Association Francaise de Normalisation, polystyrene paint

  • NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
  • NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
  • NF B56-031:1982 Panneaux fibragglo - (composites polystyrène) - Spécifications
  • NF T54-420*NF EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods.
  • NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
  • NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
  • NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
  • NF B56-030:1982 Panneaux fibragglo - (composites polystyrène) - Définition - Désignation
  • NF T51-901:1981 Plastics. Determination of residual styrene monomer in polystyrene by gas chromatography.
  • NF T50-801*NF EN 15342:2008 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates
  • NF EN 15342:2008 Plastiques - Plastiques recyclés - Caractérisation des recyclats de polystyrène (PS)
  • NF T54-090:1976 Plastics. Unplasticized and chlorinated PVC pipes. Colour of pipes and fittings.
  • NF T51-912:1980 PLASTICS. POLYSTYRENE MOULDING AND EXTRUSION MATERIALS. DETERMINATION OF PROPERTIES.
  • NF T51-006:1957 Plastics. Determination of methanol-soluble polystyrene.
  • NF T46-071*NF ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
  • NF T54-947*NF EN ISO 15493:2004 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series

American Society for Testing and Materials (ASTM), polystyrene paint

  • ASTM D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
  • ASTM D4549-03 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
  • ASTM D6164-05 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
  • ASTM D6164-00 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
  • ASTM D6164-05e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
  • ASTM D6164/D6164M-11 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
  • ASTM D4549-15(2021) Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
  • ASTM D4549-15 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
  • ASTM D2282-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
  • ASTM D2282-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
  • ASTM D4549-11 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
  • ASTM D4026-87(2002)e1 Standard Test Method for Rubber Latex-Styrene-Butadiene Copolymer-Determination of Residual Styrene
  • ASTM C578-03b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-03a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-03 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-05a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-05 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-04a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-22 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM D3314-02(2021) Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
  • ASTM D1527-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
  • ASTM D4026-06(2021) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
  • ASTM D2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
  • ASTM D2680-95a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
  • ASTM D2680-01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
  • ASTM C578-19 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-16 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-06 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-00 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-01 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-92 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-07 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-87a Standard Specification for Preformed, Cellular Polystyrene Thermal Insulation
  • ASTM C578-18 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-12a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-04 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-95 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-17 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-15 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-08 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-08a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-08b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-09 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-09e1 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-11a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-12 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-13 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-14 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-14a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-15a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-15b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-17a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C578-23 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM D4026-06 Standard Test Method for Rubber Latex8212;Styrene-Butadiene Copolymer8212;Determination of Residual Styrene
  • ASTM D4026-06(2012) Standard Test Method for Rubber Latexmdash;Styrene-Butadiene Copolymermdash;Determination of Residual Styrene
  • ASTM D6164/D6164M-21 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
  • ASTM D6164/D6164M-16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
  • ASTM D2121-07 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
  • ASTM D2121-00 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
  • ASTM F2806-10e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
  • ASTM D2680-01(2014) Standard Specification for Acrylonitrile-Butadiene-Styrene &40;ABS&41; and Poly&40;Vinyl Chloride&41; &40;PVC&41; Composite Sewer Piping
  • ASTM D6817-07 Standard Specification for Rigid Cellular Polystyrene Geofoam
  • ASTM D6817-02 Standard Specification for Rigid Cellular Polystyrene Geofoam
  • ASTM D6817-06a Standard Specification for Rigid Cellular Polystyrene Geofoam
  • ASTM D6817-06 Standard Specification for Rigid Cellular Polystyrene Geofoam
  • ASTM D6817/D6817M-15 Standard Specification for Rigid Cellular Polystyrene Geofoam

Professional Standard - Petrochemical Industry, polystyrene paint

  • SH 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
  • SH/T 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
  • SH/T 1590-1994 Styrene-butadiene series impact-resistant polystyrene (SB) resin
  • SH 1590-1994 Styrene-butadiene series impact-resistant polystyrene (SB) resin
  • SH 1540-1993 Styrene/Acrylonitrile (SAN) Copolymer Molding and Extrusion Nomenclature
  • SH/T 1610-2001 Styrene-butadiene block copolymer

Professional Standard - Agriculture, polystyrene paint

  • GBn 89-1980 Food packaging material: polystyrene resin
  • SN/T 0625.2-1997 Rules for the inspection of imported waste plastics that can be used as raw materials—waste of ethylene, styrene, vinyl chloride polymers and other polymers (for trial implementation)

Indonesia Standards, polystyrene paint

European Committee for Standardization (CEN), polystyrene paint

  • EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
  • EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
  • EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
  • EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
  • prEN 15342 rev Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
  • EN 15342:2007 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
  • EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022, Corrected version 2022-08)

CEN - European Committee for Standardization, polystyrene paint

  • EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
  • EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

Danish Standards Foundation, polystyrene paint

  • DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
  • DS/EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates

Lithuanian Standards Office , polystyrene paint

  • LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
  • LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • LST EN 15342-2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates

German Institute for Standardization, polystyrene paint

  • DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
  • DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
  • DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
  • DIN EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; English version of DIN EN 15342:2008-02
  • DIN EN 15342:2008-02 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; German version EN 15342:2007
  • DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • DIN 55471-1:1983 Cellular polystyrene for packaging; requirements and testing
  • DIN EN ISO 19065-2:2019-06 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
  • DIN EN ISO 19065-1:2015-03 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
  • DIN 55471-2:1987 Cellular polystyrene for packaging; design of moulded packaging
  • DIN 18184:2008 Gypsum plaster boards with polystyrene or polyurethane rigid foam as insulating material
  • DIN 18184:2008-10 Gypsum plaster boards with polystyrene or polyurethane rigid foam as insulating material / Note: Applies in conjunction with DIN EN 13950 (2006-02).

Canadian General Standards Board （CGSB), polystyrene paint

  • CGSB 1-GP-71 METH 82.3-1982 Methodes D'Essai Des Peintures Et Pigments Analyse De La Resine Vinylique Dosage Du Poly (Chlorure De Vinyle)

Professional Standard - Commodity Inspection, polystyrene paint

  • SN 0625.2-1997 Inspection rules of imported plastic scrap as raw material.Polymer scrap of ethylene, styrene, vinyl chloride respective and others
  • SN/T 2889-2011 Food contact materials for export.Polymers.Determination of toluene ethylbenzene propylbenzene isopropylbenzene styrene and total volatile substances in polystyrene.Gas chromatography method

IT-UNI, polystyrene paint

SAE - SAE International, polystyrene paint

Society of Automotive Engineers (SAE), polystyrene paint

AR-IRAM, polystyrene paint

American National Standards Institute （ANSI), polystyrene paint

  • ANSI/ASTM D4549:1985 Specification for Polystyrene Molding and Extrusion Materials (PS) (95-1, Item 24) (08.03)
  • ANSI/ASTM D4673:1998 Acrylonitrile-Butadiene-Styrene (ABS) Molding and Extrusion Materials, Specification for (08.03)
  • ANSI/ASTM D1527:2005 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
  • ANSI/ASTM D5676:1999 Specification for Recycled Polystyrene Molding and Extrusion Materials (08.03)
  • ANSI/ASTM D2468:1996 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40

Military Standards (MIL-STD), polystyrene paint

Electronic Industrial Alliance (U.S.), polystyrene paint

  • EIA 519-1986 Molded Expanded Polystyrene (EPS) Packaging Material

Professional Standard - Machinery, polystyrene paint

GM Daewoo, polystyrene paint

Professional Standard - Building Materials, polystyrene paint

Hebei Provincial Standard of the People's Republic of China, polystyrene paint

SE-SIS, polystyrene paint

Anhui Provincial Standard of the People's Republic of China, polystyrene paint

  • DB34/T 2985-2017 General Technical Conditions for Polystyrene Recycled Material (PS-RC)

国家质量监督检验检疫总局, polystyrene paint

  • SN/T 4156-2015 Detection method of divinylbenzene in polystyrene plastic bags for import and export: Gas chromatography-mass spectrometry

Association of German Mechanical Engineers, polystyrene paint

Guangdong Provincial Standard of the People's Republic of China, polystyrene paint

HU-MSZT, polystyrene paint

ZA-SANS, polystyrene paint

国家建筑材料工业局, polystyrene paint

Standard Association of Australia （SAA）, polystyrene paint

  • AS/NZS 4585.1:1999 Low styrene emission resins - Determination of styrene evaporation from unsaturated polyester and vinyl ester resins

International Federation of Trucks and Engines, polystyrene paint

ES-UNE, polystyrene paint

  • UNE-EN ISO 19065-2:2020 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

US-AAMA, polystyrene paint

  • AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

Professional Standard - Traffic, polystyrene paint

  • JT/T 526-2004 Material for modified asphalt in pavement-Styrene-butadien block copolymer

SG-SPRING SG, polystyrene paint

  • SS 356-1991 SPECIFICATION FOR Disposable Polystyrene Cutlery

Malaysia Standards, polystyrene paint

  • MS 1502-2000 Specification for disposable polystyrene cutlery

BELST, polystyrene paint

  • STB 1437-2004 Insulating expanded polystyrene slabs. Specifications
  • STB 2222-2011 Foamed polistyrene aggregate in a granulated form. Specifications
  • STB 1978-2009 Polystyrol and concrete wall products. Specifications

轻工业部, polystyrene paint

Military Standard of the People's Republic of China-General Armament Department, polystyrene paint

  • GJB 8280-2014 Specification for PTFE plate filled with poly (phenyl p-hydroxybenzoate)
  • GJB 8279-2014 Specification for PTFE bar filled with poly (phenyl p-hydroxybenzoate)
  • GJB 8278-2014 Specification for PTFE pipes filled with poly (phenyl p-hydroxybenzoate)
  • GJB/J 5126-2002 Specification for polystyrene particle size reference materials

Defense Logistics Agency, polystyrene paint

  • DLA L-P-535 E NOTICE 4-2012 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID

Professional Standard-Packaging, polystyrene paint

  • BB 0007-1995 Packaging container expanded polystyrene lunch box

ES-AENOR, polystyrene paint

Professional Standard - Textile, polystyrene paint

  • FZ/T 52034-2014 Polyethylene/polyethylene terephthalate (PE/PET) bicomponent composite staple fiber
  • FZ/T 52034-2013 Polyethylene/polyethylene terephthalate (PE/PET) composite staple fiber

U.S. Air Force, polystyrene paint

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, polystyrene paint

NO-SN, polystyrene paint

  • NS 1641-1969 Fish boxes made of expanded polystyrene - Quality requirements

  Pigment equipment, Where is the polystyrene paint, finger paint, art paint, art paint, Industrial Pigments, Pigment metal, extender pigment, Pigment amount, pigment mercury, pigment iso, paint painting, Pigment detection, Pigment test, polystyrene paint, ceramic pigment, acrylic paint, Inorganic pigments, Inorganic Pigments Organic Pigments, Organic Pigments Inorganic Pigments.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved