Various plastic fire points

Various plastic fire points, Total:124 items.

In the international standard classification, Various plastic fire points involves: Electrical engineering in general, Coals, Protection against fire, Plastics, Fuels, Raw materials for rubber and plastics, Pipeline components and pipelines, Analytical chemistry, Rubber and plastics products, Insulating materials, PETROLEUM AND RELATED TECHNOLOGIES, Petroleum, petroleum products and natural gas handling equipment, Reinforced plastics.

Professional Standard - Electron, Various plastic fire points

SJ/Z 9132-1987 Tests for flammability of plastic materials used for parts and components in electric devices and equipment

RU-GOST R, Various plastic fire points

GOST 30404-2013 Solid mineral fuel. Determination of forms of sulfur
GOST 27313-1995 Solid mineral fuel. Symbols of analytical results and formulae for calculation of analyses to different bases

American National Standards Institute （ANSI), Various plastic fire points

ANSI/ASTM D1929:1996 Test Method for Ignition Properties of Plastics (08.01)
ANSI/ASTM D3814:1999 Guide for Locating Combustion Test Method for Plastics

German Institute for Standardization, Various plastic fire points

DIN EN ISO 10093:1999 Plastics - Fire tests - Standard ignition sources (ISO 10093:1998); German version EN ISO 10093:1998
DIN EN 60674-3-1:2012 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998 + A1:2011); German version EN 60674-3-1:1998 + A1:2011
DIN EN 60674-3-3:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation (IEC 60674-3-3:1992); German version EN 60674-3-3:1998
DIN EN 60674-3-4 bis 6:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheets 4 to 6: Requirements for polyimide films used for electrical insulation (IEC 60674-3-4 to 6:1993); German version EN 60674-3-4 bis 6:1995
DIN EN ISO 9773:2004-02 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003 / Note: To be replaced by DIN EN ISO 9773 (2011-04).
DIN EN 60674-3-7:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:1992); German version EN 60674-3-7:1998
DIN EN ISO 9773:2024 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO/DIS 9773:2024); German and English version prEN ISO 9773:2024
DIN EN ISO 9773:2024-02 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO/DIS 9773:2024); German and English version prEN ISO 9773:2024 / Note: Date of issue 2024-01-19*Intended as replacement ...
DIN EN 60674-3-2:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation (IEC 60674-3-2:1992); Ge

British Standards Institution (BSI), Various plastic fire points

BS EN ISO 10093:1999 Plastics - Fire tests - Standard ignition sources
BS ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
BS ISO 9854-2:2023 Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - Test conditions for pipes of various materials
22/30414914 DC BS ISO 9854-2. Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - Part 2. Test conditions for pipes of various materials
23/30470178 DC BS ISO 9854-2.2. Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - Part 2. Test conditions for pipes of various materials
BS EN 60674-3-8:2011 Plastic films for electrical purposes. Specifications for individual materials. Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
BS EN ISO 9773:1999(2004) Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small - flame ignition source
BS EN 60674-3-8:2011+A1:2017 Plastic films for electrical purposes - Specifications for individual materials. Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
22/30451642 DC BS EN 60674-3-3. Specification for plastic films for electrical purposes - Part 3. Specifications for individual materials. Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation
24/30461410 DC BS EN ISO 9773 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

未注明发布机构, Various plastic fire points

DIN EN ISO 10093 Plastics - Fire tests - Standard ignition sources
AS 2122.1:1993(R2016) Combustion characteristics of plastics - Determination of flame propagation - Surface ignition of vertically oriented specimens of cellular plastics
ASTM RR-F02-1025 2008 F2622-Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
DIN EN ISO 9773 E:2011-04 Determination of the combustion behavior of thin flexible vertical specimens of plastics in contact with a small flame ignition source (draft)
ASTM RR-D02-1520 1997 D6733-Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM RR-D02-1518 2002 D6730-Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas
ASTM RR-D02-1519 1997 D6729-Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography

American Society for Testing and Materials (ASTM), Various plastic fire points

ASTM E776-87(2004) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM E776-87(1996) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM E776-87(2009) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM D1929-12 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-11 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13a Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D6733-01 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Meter Capillary High Resolution Gas Chromatography
ASTM D6733-01(2006) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM F2622-08(2013) Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM F2622-08 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM F2622-20 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM D8076-17 Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D8076-19 Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D8076-20 Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D8076-19a Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D8076-17a Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D8076-18 Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D6623-01 Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography
ASTM F2622-08e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM D7474-08 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
ASTM D7474-12 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
ASTM D7474-17 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
ASTM D6729-01 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Meter Capillary High Resolution Gas Chromatography
ASTM D6733-01(2011) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM D6729-14 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
ASTM D6730-01 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D6730-01(2006)e1 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 1000150;Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D6730-01(2011) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 1000150;Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D6733-01(2020) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM D6729-04e1 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
ASTM D6729-20 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
ASTM D6730-21 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D6730-19 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

ES-AENOR, Various plastic fire points

UNE 60-714-1992 Turned outlet connectors to flexible tubes for first, second and third family gaseous fuels low pressure

International Organization for Standardization (ISO), Various plastic fire points

ISO 871:1996 Plastics - Determination of ignition temperature using a hot-air furnace
ISO/DIS 9854-2.2 Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials
ISO 9854-2:1994 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 2: Test conditions for pipes of various materials
ISO/CD 9773 Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

Japanese Industrial Standards Committee (JISC), Various plastic fire points

JIS K 7193:1999 Plastics -- Determination of ignition temperature using a hot-air furnace
JIS K 7193:2010 Plastics -- Determination of ignition temperature using a hot-air furnace
JIS K 7341:2006 Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
JIS K 7053:1999 Textile glass reinforced plastics -- Determination of void content -- Loss on ignition, mechanical disintegration and statistical counting methods

Professional Standard - Chemical Industry, Various plastic fire points

HG/T 4670-2014 Determination of black speck and impurity in flame retardant for plastic modification

(U.S.) Ford Automotive Standards, Various plastic fire points

FORD FLTM BO 021-3-2001 METHOD FOR DETERMINING FLOW UNDER LOAD OF VARIOUS PLASTIC MATERIALS AT MODERATE TEMPERATURES

European Committee for Standardization (CEN), Various plastic fire points

EN ISO 10093:1998 Plastics - Fire Tests - Standard Ignition Sources ISO 10093:1998
prEN ISO 9773 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO/DIS 9773:2024)

GOST, Various plastic fire points

GOST ISO 8030-2022 Rubber and plastics hoses. Determination of flammability
GOST 27313-1989 Solid fuel. Analytical indices designation and formulae of analysis results recalculation for various states fuel

PT-IPQ, Various plastic fire points

NP 2943-1986 Paints and varnishes. Rapid test identifies hazardous species via flash point

GSO, Various plastic fire points

GSO ISO 2898-1:2015 Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
GSO EN 50363-10-2:2011 Insulating, sheathing and covering materials for low voltage energy cables — Part 10-2: Miscellaneous sheathing compounds — Thermoplastic polyurethane
GSO ISO 9854-2:2013 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 2: Test conditions for pipes of various materials
OS GSO ISO 9854-2:2013 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 2: Test conditions for pipes of various materials
OS GSO EN 50363-10-2:2011 Insulating, sheathing and covering materials for low voltage energy cables — Part 10-2: Miscellaneous sheathing compounds — Thermoplastic polyurethane
GSO ISO 9773:2009 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
GSO ISO 16014-3:2014 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
GSO ISO 16014-2:2014 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
GSO ISO 16014-1:2014 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles

Standard Association of Australia （SAA）, Various plastic fire points

ISO 9854-2:2023 Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials
AS 2122.1:1993 Combustion characteristics of plastics - Determination of flame propagation - Surface ignition of vertically oriented specimens of cellular plastics

AENOR, Various plastic fire points

UNE 53993:2009 IN Plastics. Thermoplastic tanks above ground or pit installation for liquid fuels including biodiesel with flashpoint higher than 55 oC.
UNE-EN 60674-3-1:1999/A1:2012 Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
UNE-EN ISO 9773:1998 PLASTICS. DETERMINATION OF BURNING BEHAVIOUR OF THIN FLEXIBLE VERTICAL SPECIMENS IN CONTACT WITH A SMALL-FLAME IGNITION SOURCE. (ISO 9773:1998).

Danish Standards Foundation, Various plastic fire points

DS/ISO 9854-2:1999 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charphy method - Part 2: Test conditions for pipes of various materials
DS/EN IEC 60674-3-1:2021 Plastic films for electrical purposes – Part 3: Specifications for individual materials – Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
DS/EN 60674-3-1/A1:2012 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
DS/EN 60674-3-1:1999 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
DS/EN ISO 9773:1998 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
DS/EN 60454-3-6:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Polycarbonate film tapes with acrylic thermoplastic adhesive
DS/EN 60674-3-8:2011 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
DS/EN ISO 9773/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens

IX-EU/EC, Various plastic fire points

75/716/EEC-1975 Council Directive on the Approximation of the Laws of the Member States Relating to the Sulphur Content of Certain Liquid Fuels

European Committee for Electrotechnical Standardization（CENELEC）, Various plastic fire points

EN IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
EN 60674-3-8:2011 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation

ES-UNE, Various plastic fire points

UNE 53993:2009 IN ERRATUM:2010 Plastics. Thermoplastic tanks above ground or pit installation for liquid fuels including biodiesel with flashpoint higher than 55 ºC.

Korean Agency for Technology and Standards (KATS), Various plastic fire points

KS M ISO 5772:2018 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification
KS M ISO 5772:2008 Rubber hoses and hose assemblies for measured fuel dispensing-Specification
KS M ISO 9773-2021 Plastics－Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
KS C IEC 60674-3-4-2014(2019) Specification for plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheets 4 to 6: Requirements for polyimide films used for electrical insulation
KS M ISO 9773-2016(2021) Plastics－Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
KS M 2409-2020 Standard test method for determination of individual components in spark ignition engine fuels by 100 metre capillary (with precolumn) high-resolution gas chromatography
KS M 2409-2005(2020) Standard test method for determination of individual components in spark ignition engine fuels by 100 metre capillary (with precolumn) high-resolution gas chromatography

KR-KS, Various plastic fire points

KS M ISO 5772-2018 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification
KS M ISO 9773-2016 Plastics－Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

International Electrotechnical Commission (IEC), Various plastic fire points

IEC 60674-3-4:1993 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation

Lithuanian Standards Office , Various plastic fire points

LST EN 60674-3-1-2001/A1-2012 Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998/A1:2011)
LST EN ISO 9773:2001 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998)

Association Francaise de Normalisation, Various plastic fire points

NF EN ISO 9773:1998 Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage
NF EN 60749-32/A1:2011 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 32 : inflammabilité des dispositifs à encapsulation plastique (cas d'une cause extérieure d'inflammation)
NF EN 60749-32:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 32 : inflammabilité des dispositifs à encapsulation plastique (cas d'une cause extérieure d'inflammation)
NF C26-145-3-8/A1*NF EN 60674-3-8/A1:2017 Plastic films for electrical purposes - Part 3 : specifications for individual materials - Sheet 8 : balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation

CENELEC - European Committee for Electrotechnical Standardization, Various plastic fire points

EN 60454-3-3:1998 Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 3: Polyester Film Tapes with Rubber Thermoplastic Adhesive