ZH
RU
ES
solid toc
solid toc, Total:179 items.
In the international standard classification, solid toc involves: Microbiology, Capacitors, Inorganic chemicals, Wastes, Road vehicle systems, Waxes, bituminous materials and other petroleum products, Sterilization and disinfection, Adhesives, Lubricants, industrial oils and related products, Fuels, Particle size analysis. Sieving, Switchgear and controlgear, Analytical chemistry, Fertilizers, Coals, Quantities and units, Bearings, Thermodynamics and temperature measurements, Measurement of fluid flow, Continuous handling equipment, Vocabularies, Physics. Chemistry, Aircraft and space vehicles in general, Measurement of volume, mass, density, viscosity, Water quality, Construction materials.
German Institute for Standardization, solid toc
- DIN 19539:2016-12 Investigation of solids - Temperature-dependent differentiation of total carbon (TOC<(Index)400>, ROC, TIC<(Index)900>) / Note: To be replaced by DIN EN 17505 (2022-08).
- DIN 19698-5:2018-06 Characterization of solids - Sampling of solid and semi-solid materials - Part 5: Guidance for sampling hot-spots of populations
- DIN EN 130200:1993 Sectional specification: fixed tantalum capacitors with solid or non-solid electrolyte; German version EN 130200:1993
- DIN 51705:2001-06 Testing of solid fuels - Determination of the bulk density of solid fuels
- DIN 19698-2:2016 Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation
- DIN 51719:1997-07 Testing of solid fuels - Solid mineral fuels - Determination of ash content
- DIN 19698-1:2014 Characterization of solids - Sampling of solid and semi-solid materials - Part 1: Guidance for the segmental sampling of stockpiles of unknown composite
- DIN 19698-2:2016-12 Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation
- DIN EN 130200/A3:1998 Sectional specification: Fixed tantalum capacitors with solid or non-solid electrolyte; Amendment A3; German version EN 130200/A3:1998
- DIN EN 15216:2021-12 Environmental solid matrices - Determination of total dissolved solids (TDS) in water and eluates; German version EN 15216:2021
- DIN EN 15358:2011-05 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels; German version EN 15358:2011
- DIN 1310:1984 Composition of (gaseous, liquid and solid) mixtures; concepts, symbols
- DIN EN ISO 21912:2021-07 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021); German version EN ISO 21912:2021
ZA-SANS, solid toc
Danish Standards Foundation, solid toc
- DS/EN 130200+A3:1999 Sectional Specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
- DS/ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
- DS/ISO 8991:1988 Designation system for fasteners
- DS/ISO 21912:2021 Solid recovered fuels – Safe handling and storage of solid recovered fuels
- DS/EN 827:2006 Adhesives - Determination of conventional solids content and constant mass solids content
- DS/EN 15216:2021 Environmental solid matrices – Determination of total dissolved solids (TDS) in water and eluates
- DS/CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
- DS/EN 15103:2010 Solid biofuels - Determination of bulk density
- DS/ISO/TR 21916:2021 Solid recovered fuels – Guidance for the specification of solid recovered fuels (SRF) for selected uses
- DS/EN ISO 21912:2021 Solid recovered fuels – Safe handling and storage of solid recovered fuels (ISO 21912:2021)
- DS/EN 15358:2011 Solid recovered fuels – Quality management systems – Particular requirements for their application to the production of solid recovered fuels
Lithuanian Standards Office , solid toc
- LST EN 130200+A3-2001 Sectional specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
- LST EN 827-2006 Adhesives - Determination of conventional solids content and constant mass solids content
- LST EN 15103-2010 Solid biofuels - Determination of bulk density
- LST EN 15358-2011 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
- LST EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021)
Association Francaise de Normalisation, solid toc
- NF C83-112-200/A3*NF EN 130200/A3:2015 Sectional specification : fixed tantalum capacitors with non-solid or solid electrolyte
- NF EN 827:2006 Adhésifs - Détermination de l'extrait sec conventionnel et de l'extrait sec à masse constante
- NF EN 15216:2021 Matrices environnementales solides - Détermination de la concentration en matières solides dissoutes totales (TDS) de l'eau et des éluats
- NF T76-101*NF EN 827:2006 Adhesives - Determination of conventional solids content and constant mass solids content.
- NF T76-101:1995 Adhesives. Determination of conventional solids content and constant mass solids content.
- NF X34-105:2010 Solid biofuels - Determination of bulk density.
- NF X34-231*NF EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels
- NF EN ISO 21912:2021 Combustibles solides de récupération - Sécurité de la mise en œuvre et du stockage de combustibles solides de récupération
- NF M03-006:1994 Solid mineral fuels. Determination of fixed carbon content.
- NF X30-480*NF EN 15216:2021 Environmental solid matrices - Determination of total dissolved solids (TDS) in water and eluates
- NF X34-105*NF EN ISO 17828:2016 Solid biofuels - Determination of bulk density
- NF EN ISO 105-X04:1997 Textiles - Essais de solidité des teintures - Partie X04 : solidité des teintures au mercerisage.
- NF M03-018:2003 Solid mineral fuels - Determination of nitrogen.
- NF X34-103:2011 Solid biofuels - Sampling.
- NF X34-122:2011 Solid biofuels - Sample preparation.
- NF T60-127:1974 Tensile strength of paraffin wax.
- NF C93-112-15*NF EN 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15 : sectional specification : Fixed tantalum capacitors with non-solid or solid electrolyte
- NF EN ISO 105-X07:1997 Textiles - Essais de solidité des teintures - Partie X07 : solidité des teintures à la surteinture : laine.
- NF X34-202*NF EN 15358:2011 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
- NF EN 15358:2011 Combustibles solides de récupération - Systèmes de management de la qualité - Exigences particulières pour leur application à la production de combustibles solides de récupération
- NF X34-112:2011 Solid biofuels - Determination of particle density.
- NF EN ISO 105-X05:1997 Textiles - Essais de solidité des teintures - Partie X05 : solidité des teintures aux solvants organiques.
- NF EN ISO 105-G03:1997 Textiles - Essais de solidité des teintures - Partie G03 : solidité des teintures à l'ozone dans l'atmosphère.
American Society for Testing and Materials (ASTM), solid toc
- ASTM E1456-08 Standard Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid)
- ASTM D5232-19 Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
- ASTM UOP1009-15 Total Mercury in Solids
- ASTM D7579-09(2013) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
- ASTM D5232-92(1997) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
- ASTM D5232-92(2008) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
- ASTM D7579-09 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
- ASTM D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
- ASTM D5232-13 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
- ASTM D757-77 Standard test method for determination of pyrolysis solids content in pyrolysis liquids by methanol solids filtration method
- ASTM F2511-05 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
- ASTM F2511-05e1 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
- ASTM D2766-95(2005) Standard Test Method for Specific Heat of Liquids and Solids
- ASTM D2766-95(2000) Standard Test Method for Specific Heat of Liquids and Solids
- ASTM F2511-05(2013) Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
- ASTM D2766-95(2009) Standard Test Method for Specific Heat of Liquids and Solids
- ASTM D2766-95 Standard Test Method for Specific Heat of Liquids and Solids
- ASTM D5232-92(2003) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
- ASTM D3289-17(2022) Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
- ASTM D3289-17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
Universal Oil Products Company (UOP), solid toc
- UOP 1009-2015 Total Mercury in Solids
- UOP 649-2010 Total Oxygen in Solid, Semi-solid, and High Boiling Point Liquid Hydrocarbons by Pyrolysis
SE-SIS, solid toc
- SIS SS CECC 30200-1986 Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
- SIS SS 404 09 24-1992 Solid insulating materials - Methods of test for electric strength of solid insulating materials
- SIS SS CECC 30300-1989 Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte
- SIS 02 02 02-1966 Sampling of liquid, semi-liquid and certain solid products
Society of Automotive Engineers (SAE), solid toc
National Fire Protection Association (NFPA), solid toc
Professional Standard - Petrochemical Industry, solid toc
- NB/SH/T 0817-2010 Standard test method for density of semi-solid and solid asphalt Nickel crucible method
CZ-CSN, solid toc
American National Standards Institute （ANSI), solid toc
U.S. Military Regulations and Norms, solid toc
British Standards Institution (BSI), solid toc
- BS PD ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
- PD ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
- BS EN 60384-15:2017 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
- BS EN ISO 18847:2016 Solid biofuels. Determination of particle density of pellets and briquettes
- BS EN ISO 21912:2021 Solid recovered fuels. Safe handling and storage of solid recovered fuels
- BS EN 15358:2011 Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels
- BS EN 827:2005 Adhesives - Determination of conventional solids content and constant mass solids content
- BS EN ISO 17828:2015 Solid biofuels. Determination of bulk density
- BS EN 15103:2010 Solid biofuels. Determination of bulk density
- BS EN 15103:2009 Solid biofuels - Determination of bulk density
- BS 7420:1991 Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)
- BS PD ISO/TR 21916:2021 Solid recovered fuels. Guidance for the specification of solid recovered fuels (SRF) for selected uses
- PD ISO/TR 21916:2021 Solid recovered fuels. Guidance for the specification of solid recovered fuels (SRF) for selected uses
- DD CEN/TS 15358:2006 Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels
- BS DD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density
- BS DD CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
- BS DD CEN/TS 15358:2006 Solid recovered fuels — Quality management systems — Particular
requirements for their application to the production of solid
recovered fuels
- BS DD CEN/TS 15358:2007 Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels
International Organization for Standardization (ISO), solid toc
- ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
- ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
- ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels
- ISO 17828:2015 Solid biofuels - Determination of bulk density
- ISO 31-13:1981 Quantities and units of solid state physics
- ISO 31-13:1975 Title missing - Legacy paper document
- ISO 7742:1988 Solid fertilizers; reduction of samples
- ISO/TR 21916:2021 Solid recovered fuels - Guidance for the specification of solid recovered fuels (SRF) for selected uses
RO-ASRO, solid toc
Underwriters Laboratories (UL), solid toc
FI-SFS, solid toc
European Committee for Standardization (CEN), solid toc
- EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021)
- EN 827:2005 Adhesives - Determination of conventional solids content and constant mass solids content
- EN 827:1994 Adhesives - Determination of Conventional Solids Content and Constant Mass Solids Content
- prEN 827-1992 Adhesives; determination of conventional solids content and constant mass solids content
- EN 15216:2021 Environmental solid matrices - Determination of total dissolved solids (TDS) in water and eluates
- EN 15103:2009 Solid biofuels - Determination of bulk density
- EN 15358:2011 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
IT-UNI, solid toc
Professional Standard - Aerospace, solid toc
- QJ 1369-1988 General requirements for solid rocket motors for composite solid propellants
- QJ 1369A-2006 General requirements for solid rocket motors for composite solid propellants
- QJ 809-1983 Method for determination of thermal conductivity of solid propellants and solid motor insulation
ES-UNE, solid toc
- UNE-EN ISO 21912:2022 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021)
- UNE-EN 15216:2021 Environmental solid matrices - Determination of total dissolved solids (TDS) in water and eluates (Endorsed by Asociación Española de Normalización in December of 2021.)
- UNE 77034:2019 Water quality. Determination of volatile and fixed suspension solid.
Defense Logistics Agency, solid toc
BE-NBN, solid toc
- NBN EN 827-1995 Adhesives - Determination of conventional solids content and constant mass solids content
AENOR, solid toc
- UNE-EN 827:2006 Adhesives - Determination of conventional solids content and constant mass solids content
- UNE 77034:2002 Water quality. Determination of volatile and fixed suspension solid.
- UNE 77031:2002 Water quality. Determination of dissolved solid.
- UNE-EN 15358:2011 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
未注明发布机构, solid toc
- BS EN 827:2005(2007) Adhesives — Determination of conventional solids content and constant mass solids content
Building Officials and Code Administrators International(U.S.), solid toc
RU-GOST R, solid toc
Korean Agency for Technology and Standards (KATS), solid toc
KR-KS, solid toc
CL-INN, solid toc
NL-NEN, solid toc
PL-PKN, solid toc
ESDU - Engineering Sciences Data Unit, solid toc
European Committee for Electrotechnical Standardization（CENELEC）, solid toc
- EN 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
国家能源局, solid toc
- NB/T 10763-2021 Determination of heavy metal mercury in solid biomass fuel by solid injection direct method
HU-MSZT, solid toc
CEN - European Committee for Standardization, solid toc
- PD CEN/TS 15358:2006 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
Association of German Mechanical Engineers, solid toc
- VDI 4436-2007 Measurement of mass and volume flows of bulk solids
Professional Standard - Urban Construction, solid toc
- CJ/T 53-1999 Municipal sewage.Determination of sinkable solid.Volumetric method
- CJ/T 3018.4-1993 Leachate.Determination of total dissolved solids and total suspended solids
SAE - SAE International, solid toc
- SAE AIR1168/9-1991 Thermophysical Properties of the Natural Environment@ Gases@ Liquids@ and Solids
Electronic Components, Assemblies and Materials Association, solid toc
- ECA EIA-60384-15-2014 Fixed Capacitors for Use in Electronic Equipment - Part 15: Sectional Specification - Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
AR-IRAM, solid toc
AT-ON, solid toc
CH-SNV, solid toc
- SN EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021)