ZH
RU
ES
Plastic Film Dimensional Tolerances
Plastic Film Dimensional Tolerances, Total:162 items.
In the international standard classification, Plastic Film Dimensional Tolerances involves: Sacks. Bags, Electronic components in general, Plastics, Bottles. Pots. Jars, Rubber and plastics products, Bearings, Cans. Tins. Tubes, Road vehicle systems, Galvanic cells and batteries, Barrels. Drums. Canisters, Pipeline components and pipelines, Farm buildings, structures and installations, Reinforced plastics, Construction materials, Fluid power systems.
SE-SIS, Plastic Film Dimensional Tolerances
- SIS SS 84 46 19-1983 Sacks of plastic film - Tolerances
- SIS SS 84 46 17-1981 Plastic film sacks - Designations and measurement of dimensions
- SIS SS 3357-1980 Screw threads -Asymmetrical trapezoidal screw threads of plastic material - Basic dimensions and screw thread tolerances - Metric series
Korean Agency for Technology and Standards (KATS), Plastic Film Dimensional Tolerances
- KS T ISO 8367-2:2012 Packaging－Dimensional tolerances for general purpose sacks made from thermoplastic flexible film
- KS M ISO 11501:2014 Plastics — Film and sheeting — Determination of dimensional change on heating
- KS T ISO 8367-2:2020 Packaging — Dimensional tolerances for general purpose sacks —Part 2: Sacks made from thermoplastic flexible film
- KS M ISO 11501-2014(2019) Plastics — Film and sheeting — Determination of dimensional change on heating
- KS B 7929-1999 Dimensions of driving shafts and connecting sockets of vinyl roll-up-down device for greenhouses
- KS M ISO 6123-3:2018 Rubber-or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
- KS M ISO 6123-3:2008 Rubber- or plastics-covered rollers－Specifications－Part 3：Dimensional tolerances
- KS M ISO 11922-1:2022 Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
- KS M ISO 1307:2018 Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
Professional Standard - Electron, Plastic Film Dimensional Tolerances
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plastic Film Dimensional Tolerances
- GB/T 14486-2008 Dimensional tolerances for moulded plastic parts
- GB/T 14486-1993 Dimensional tolerances for plastic engineering moulded plastic pats
- GB/T 12027-2004 Plastics-Film and sheeting-Determination of dimensional change on heating
- GB/T 25161.2-2010 Packaging sacks.Dimensional tolerances.Part 2:Sacks made from thermoplastic flexible film
- GB/T 9575-2003 Rubber and plastics hoses for general--Purpose industrial applications-Bore diameters and tolerances,and tolerances on length
- GB/T 42952.1-2023 Dimensions and tolerances of thermoplastic tubing for fluid transport - Part 1: Metric series
British Standards Institution (BSI), Plastic Film Dimensional Tolerances
- BS EN ISO 8367-2:1995 Packaging. Dimensional tolerances for general purpose sacks. Sacks made from thermoplastic flexible film
- BS EN ISO 8367-2:1997 Packaging. Dimensional tolerances for general purpose sacks. Sacks made from thermoplastic flexible film
- BS EN ISO 11501:1996 Plastics - Film and sheeting - Determination of dimensional change on heating - Determination of dimensional change on heating of film and sheeting
- BS EN ISO 7823-3:2007 Plastics - Poly(methacrylate) sheets - Types, dimensions and characteristics - Continuous cast sheets
- BS EN ISO 11501:2004 Plastics. Film and sheeting. Determination of dimensional change on heating. Determination of dimensional change on heating of film and sheeting
- BS EN 13045:2022 Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances
- BS EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- BS ISO 11922-1:2018 Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Metric series
- BS 7442-4.3:1993 Rubber or plastics covered rollers. Requirements. Specification for dimensional tolerances
- 21/30439608 DC BS EN 13045. Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances
- BS EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
- BS EN 14979:2006 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13
- BS EN ISO 1307:2008 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
- BS ISO 7425-1:2002 Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings
- BS ISO 7425-1:2021 Hydraulic fluid power cylinders. Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals. Piston seal housings
HU-MSZT, Plastic Film Dimensional Tolerances
- MSZ 7756-1961 Dimensional tolerances of thermoplastic injection molded parts
German Institute for Standardization, Plastic Film Dimensional Tolerances
- DIN EN ISO 8367-2:1996 Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993); German version EN ISO 8367-2:1996
- DIN EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995); German version EN ISO 11501:2004
- DIN 53377:2021 Testing of plastic films - Determination of dimensional stability
- DIN 53377:2007 Testing of plastic films - Determination of dimensional stability
- DIN 53377:2015 Testing of plastic films - Determination of dimensional stability
- DIN 53377:2021-11 Testing of plastic films - Determination of dimensional stability
- DIN 53377:1969 Testing of Plastic Films; Determination of Dimensional Stability
- DIN EN ISO 11501:2004-10 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995); German version EN ISO 11501:2004
- DIN EN 13045:2022 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- DIN EN 13045:2022-10 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; German version EN 13045:2022
- DIN 7868-3:1986 Rubber and plastics covered rollers; dimensional and geometrical tolerances
- DIN 7868-3:1986-06 Rubber and plastics covered rollers; dimensional and geometrical tolerances
- DIN EN ISO 8367-2:1996-10 Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993); German version EN ISO 8367-2:1996
- DIN EN 13974:2003-01 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume; German version EN 13974:2002
- DIN 16901:1982 Plastics mouldings; Tolerances and acceptance conditions for linear dimensions
- DIN 16941:2012-11 Thermoplastics extruded profiles - General tolerances of size, form and orientation
- DIN EN 14979:2006 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13 English version of DIN EN 14979:2006-05
- DIN 16940:2009 Plastics - Extruded hoses of plasticized polyvinylchloride (PVC-P) - Permissable deviations for dimensions for which tolerances are not indicated
- DIN 16941:2012 Thermoplastics extruded profiles - General tolerances of size, form and orientation
- DIN EN 14979:2006-05 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13; German version EN 14979:2006
- DIN EN 13974:2003 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume; German version EN 13974:2002
- DIN EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; English version of DIN EN 13045:2009-08
- DIN EN ISO 1307:2008-04 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006); German version EN ISO 1307:2008
American National Standards Institute （ANSI), Plastic Film Dimensional Tolerances
Professional Standard - Chemical Industry, Plastic Film Dimensional Tolerances
- HG/T 3079-1999 Dimensional tolerances of rubber or plastics covered rollers
- HG/T 3079-1988 Dimensional tolerances of rubber or plastics covered rollers
European Committee for Standardization (CEN), Plastic Film Dimensional Tolerances
- EN ISO 8367-2:1996 Packaging - Dimensional Tolerances for General Purpose Sacks - Part 2: Sacks Made from Thermoplastic Flexible Film ISO 8367-2 : 1993
- EN ISO 11501:2004 Plastics Film and sheeting Determination of dimensional change on heating
- EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- EN 13045:2000 Packaging - Flexible Cylindrical Plastic Tubes - Dimensions and Tolerances
- prEN 13045-2021 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
- EN 14979:2006 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13
- EN ISO 1307:1995 Rubber and Plastics Hoses for General-Purpose Industrial Applications - Bore Diameters and Tolerances, and Tolerances on Length (ISO 1307 : 1992)
- EN ISO 1307:2008 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006)
CZ-CSN, Plastic Film Dimensional Tolerances
- CSN 64 0006-1974 Plastics. Tolerances and limit deviations on dimensions of products made of plastics
- CSN 63 5306-1977 Rubber and plastics hoses. Bore sizes of hoses and their tolerances
Association Francaise de Normalisation, Plastic Film Dimensional Tolerances
- NF H34-033*NF EN ISO 8367-2:1996 Packaging. Dimensional tolerances for general purpose sacks. Part 2 : sacks made from thermoplastic flexible film.
- NF T54-105*NF EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating
- NF T54-105:1973 Plastics sheets. Determination of dimensional variations after heating. Kaolin bed method.
- NF EN ISO 8367-2:1996 Emballages - Tolérances dimensionnelles des sacs d'usage général - Partie 2 : sacs faits d'un film thermoplastique flexible.
- NF H34-051*NF EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- NF EN 13974:2003 Conteneurs en plastique rigide - Spécifications des tolérances sur les dimensions, le poids et le volume
- NF EN 13045:2022 Emballage - Tubes cylindriques souples en matériau plastique - Dimensions et tolérances
- NF H35-204*NF EN 13974:2003 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume.
- NF H34-059*NF EN 14979:2006 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13
- NF EN 14979:2006 Emballage - Tubes souples laminé métal/plastique - Dimensions et tolérances de la tige de type S 13
- NF EN ISO 1307:2008 Tuyaux en caoutchouc et en plastique - Dimensions des tuyaux, diamètres intérieurs minimaux et maximaux, et tolérances sur la longueur de coupe
- NF EN ISO 11833-2:2006 Plastiques - Feuilles en poly(chlorure de vinyle) non plastifié - Types, dimensions et caractéristiques - Partie 2 : feuilles et films d'épaisseur inférieure à 1 mm
YU-JUS, Plastic Film Dimensional Tolerances
International Organization for Standardization (ISO), Plastic Film Dimensional Tolerances
- ISO 11501:1995 Plastics - Film and sheeting - Determination of dimensional change on heating
- ISO 8367-2:1993 Packaging; dimensional tolerances for general purpose sacks; part 2: sacks made from thermoplastic flexible film
- ISO 7823-3:2007 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets
- ISO 6123-3:1985 Rubber- or plastics-covered rollers; Specifications; Part 3 : Dimensional tolerances
- ISO 11922-1:2018 Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series
- ISO 11922-1:1997 Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series
American Society for Testing and Materials (ASTM), Plastic Film Dimensional Tolerances
- ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D1204-07 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D1204-02 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D1204-94e1 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D3917-11 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM D3917-12 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM D3917-23 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM D3917-15 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM D3917-15e1 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM D1204-08 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D1204-14 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D3917-96(2002)e1 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM D3917-96 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM D3917-08 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
Professional Standard - Railway, Plastic Film Dimensional Tolerances
- TB/T 1626-1985 Dimensional tolerances of communication signal plastic parts
Professional Standard - Military and Civilian Products, Plastic Film Dimensional Tolerances
- WJ 1266-1981 Dimensional tolerance of plastic parts (limited standard)
Danish Standards Foundation, Plastic Film Dimensional Tolerances
- DS 812:1995 Plastic mouldings-Tolerances and acceptance conditions of dimensions
- DS/EN ISO 8367-2:1997 Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film
- DS/EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating
- DS/EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- DS/EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
- DS/ISO 11922-1:1998 Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series
- DS/ISO 6123/3:1986 Rubber- or plastic-covered rollers. Specifications. Part 3: Dimensional tolerances
- DS/EN 14979:2006 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13
- DS/EN ISO 1307:2008 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
- DS/ISO 7425-1:1992 Hydraulic fluid power.Housings for elastomer.energized plastic-faced seals.Dimensions and tolerances.Part 1; Piston seal housings
KR-KS, Plastic Film Dimensional Tolerances
- KS T ISO 8367-2-2020 Packaging — Dimensional tolerances for general purpose sacks —Part 2: Sacks made from thermoplastic flexible film
- KS M ISO 6123-3-2018 Rubber-or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
- KS M ISO 11922-1-2022 Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
- KS M ISO 1307-2018 Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
Lithuanian Standards Office , Plastic Film Dimensional Tolerances
- LST EN ISO 8367-2:2001 Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993)
- LST EN ISO 11501:2005 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995)
- LST EN 13045-2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- LST EN 13974-2003 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
- LST EN 14979-2006 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13
RO-ASRO, Plastic Film Dimensional Tolerances
- STAS 9664-1974 PLASTICS Determination of change in linear dimensions of non-rigid thermoplaslics films
- STAS SR ISO 8367-2:1996 Packaging - Dimensional tolerances for general purpose sacks Part 2: Sacks made from thermoplastic flexible film
AENOR, Plastic Film Dimensional Tolerances
- UNE-EN ISO 11501:2005 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995)
- UNE-EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- UNE-EN 13974:2003 Rigid plastic containers. Specification of tolerance for dimensions, weight and volume.
- UNE-EN ISO 8367-2:1997 PACKAGING. DIMENSIONAL TOLERANCES FOR GENERAL PURPOSE SACKS. PART 2: SACKS MADE FROM THERMOPLASTIC FLEXIBLE FILM. (ISO 8367-2:1993).
- UNE-EN 14979:2006 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13
国家市场监督管理总局、中国国家标准化管理委员会, Plastic Film Dimensional Tolerances
- GB/T 39743-2021 Plain bearings—Thermoplastic bushes—Dimensions and tolerance
Japanese Industrial Standards Committee (JISC), Plastic Film Dimensional Tolerances
- JIS K 7133:1999 Plastics -- Film and sheeting -- Determination of dimensional change on heating
未注明发布机构, Plastic Film Dimensional Tolerances
- BS EN ISO 8367-2:1997(1999) Packaging — Dimensional tolerances for general purpose sacks — Part 2 : Sacks made from thermoplastic flexible film
- BS EN ISO 11922-1:1997 Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances Part 1 . Metric series "S * MT
AT-ON, Plastic Film Dimensional Tolerances
- OENORM EN 13045-2021 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- ONORM C 9410-2-1994 Rubber products - Dimensional tolerances - Moulded rubber (elastomeric) products
ES-UNE, Plastic Film Dimensional Tolerances
- UNE-EN 13045:2022 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
Professional Standard - Automobile, Plastic Film Dimensional Tolerances
- QC/T 29017-1991 Limit deviations of untolerated dimensions for automotive molded plastic parts
- QCn 29017-1991 Limit deviations of untolerated dimensions for automotive molded plastic parts
- QC/T 29017-2023 Permissible automotive molded plastic parts variations in dimensions without tolerance indication
Professional Standard - Machinery, Plastic Film Dimensional Tolerances
- JB/T 6766-1993 Dimensional tolerance for rubber and plastic parts intended to be used in lead-acid batteries
RU-GOST R, Plastic Film Dimensional Tolerances
- GOST ISO 11922-1-2006 Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series
- GOST 28773-1990 Plain bearings. Wrapped bushes with anti-friction layer based on polytetrafluoroethylene-KV. Dimensions and tolerances
GOSTR, Plastic Film Dimensional Tolerances
- GOST ISO 11922-1-2019 Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series
Professional Standard - Building Materials, Plastic Film Dimensional Tolerances
- JC/T 490-2010 Dimensional tolerance of thermosetting glass fibre reinforced plastics pultruded shapes
- JC/T 490-1992 Dimensional tolerance of extruded sections of fiber glass reinforced thermosetting plastic
CU-NC, Plastic Film Dimensional Tolerances
- NC 30-65-1987 Plastics Industry. Determination of Changes in Lineal Dimensions of. Thermoplastic Films by Temperature Elevation. Testing Methods
国家建筑材料工业局, Plastic Film Dimensional Tolerances
- JC/T 490-1991 Dimensional tolerances for glass fiber reinforced thermoset plastic pultruded profiles
ZA-SANS, Plastic Film Dimensional Tolerances
- SANS 11922-1:1997 Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances Part 1: Metric series
FI-SFS, Plastic Film Dimensional Tolerances
- SFS 4871-1988 plastic. Flammability of polyvinyl chloride films of dimensions 550 mm x 35 mm (laboratory monitoring method of flammability)