ZH
RU
ES

Pressure Limits for Threaded Connections

Pressure Limits for Threaded Connections, Total:268 items.

In the international standard classification, Pressure Limits for Threaded Connections involves: Screw threads, Valves, Pipeline components and pipelines, Measurement of force, weight and pressure, Fluid power systems, Fasteners, Fasteners for aerospace construction, Iron and steel products, AIRCRAFT AND SPACE VEHICLE ENGINEERING, Electromechanical components for electronic and telecommunications equipment, Acoustics and acoustic measurements, Lubrication systems, Linear and angular measurements, Road vehicle systems, Aerospace fluid systems and components, Ground service and maintenance equipment, Fluid storage devices, Medical equipment, Electromagnetic compatibility (EMC), Components and accessories for telecommunications equipment, Aerospace electric equipment and systems, Hand-held tools.

British Standards Institution (BSI), Pressure Limits for Threaded Connections

BS EN 10226-3:2005 Pipe threads where pressure-tight joints are made on the threads - Verification by means of limit gauges
BS EN 10226-3:2005(2016) Pipe threads where pressure-tight joints are made on the threads - Verification by means of limit gauges
BS EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Verification by means of limit gauges
BS 21:1985 Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)
BS EN 10226-2:2005(2016) Pipe threads where pressure tight joints are made on the threads - Taper external threads and taper internal threads - Dimensions, tolerances and designation
BS EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parallel internal threads. Dimensions, tolerances and designation
BS EN 10226-1:2004(2010) Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parallel internal threads. Dimensions, tolerances and designation
BS EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
BS EN 10226-2:2006 Pipe threads where pressure tight joints are made on the threads - Taper external threads and taper internal threads - Dimensions, tolerances and designation
BS EN 1515-4:2009 Flanges and their joints - Bolting - Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
BS EN 1515-4:2010 Flanges and their joints. Bolting. Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
BS EN 15908:2010 Anaesthetic and respiratory equipment. Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
BS EN ISO 18082:2014 Anaesthetic and respiratory equipment. Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
BS EN 61000-3-11:2001 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated voltage current 75 A and subject to conditional connection
PD IEC/TR 61000-3-7:2008 Electromagnetic compatability (EMC). Limits. Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
PD IEC/TR 61000-3-6:2008 Electromagnetic compatibility (EMC). Limits. Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems
BS EN 3155-044:2007 Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male 044, type A, double crimping, class T. Product standard
PD IEC/TR 61000-3-13:2008 Electromagnetic compatibility (EMC). Limits. Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems
BS EN 1515-4:2021 Tracked Changes. Flanges and their joints. Bolting. Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
BS 5380:1984 Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads
BS 6362:1990 Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads'

Danish Standards Foundation, Pressure Limits for Threaded Connections

DS/ISO 228/2:1985 Pipe threads where pressure-tight joints are not made on the threads. Part 2: Verification by means of limit gauges
DS/ISO 7/2:1985 Pipe threads where pressure-tight joints are made on the threads. Part 2: Verification by means of limit gauges
DS/EN 10226-3:2006 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
DS/EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges
DS/EN 10226-1:2005 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
DS/EN 10226-2:2006 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
DS/EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
DS/EN 1515-4:2021 Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU

Korean Agency for Technology and Standards (KATS), Pressure Limits for Threaded Connections

KS B ISO 228-2-2007(2012) Pipe threads where pressure－tight joints are not made on the threads－Part 2：Verification by means of limit gauges
KS B ISO 7-2:2003 Pipe threads where pressure－tight joints are made on the threads－Part 2：Verification by means of limit gauges
KS B ISO 7-2-2003(2018) Pipe threads where pressure－tight joints are made on the threads－Part 2：Verification by means of limit gauges
KS W ISO 5855-3:2005 Aerospace－MJ threads－Part 3：Limit dimensions for fittings for fluid systems
KS W 1552-2001(2011) Aerospace－MJ threads－Part 3：Limit dimensions for fittings for fluid systems
KS W ISO 5855-3-2005(2020) Aerospace－MJ threads－Part 3：Limit dimensions for fittings for fluid systems
KS C IEC 60130-4:2003 Connectors for frequencies below 3 MHz(Mc/s)-Part 4:Circular multipole connectors with threaded coupling
KS C IEC 60130-4:2014 Connectors for frequencies below 3 MHz(Mc/s)－Part 4：Circular multipole connectors with threaded coupling
KS C IEC 60130-4-2003(2008) Connectors for frequencies below 3 MHz(Mc/s)－Part 4：Circular multipole connectors with threaded coupling
KS B ISO 7-1-2007(2017) Pipe threads where pressure－tight joints are made on the threads－Dimensions, tolerances and designation
KS B ISO 7-1-2007(2022) Pipe threads where pressure－tight joints are made on the threads－Dimensions, tolerances and designation
KS B ISO 228-1-2007(2022) Pipe threads where pressure－tight joints are not made on the threads－Part 1：Dimensions, tolerances and designation
KS W 1545-2013 Pipe threads where pressuretight joints are not made on the threads－Part 1：Dimensions, tolerances and designation
KS W 1545-1999(2009) Pipe threads where pressuretight joints are not made on the threads－Part 1：Dimensions, tolerances and designation
KS W ISO 3174-2008(2013) Aircraft－Connections for checking hydraulic systems by ground appliances－Threaded type
KS B ISO 15171-2:2005 Connections for fluid power and general use-Hydraulic couplings for diagnostic purposes-Part 2:Coupling with M16×2 end for connection under pressure
KS B ISO 15171-2:2013 Connections for fluid power and general use－Hydraulic couplings for diagnostic purposes－Part 2：Coupling with M16×2 end for connection under pressure
KS B ISO 8434-5:2002 Metallic tube connections for fluid power and general use-Part 5 : Test methods for threaded hydraulic fluid power connections
KS C IEC 60169-25:2008 Radio-frequency connectors-Part 25:Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13.56 mm(0.534 in)
KS B ISO 12209-2:2005 Gas cylinders-Outlet connections for gas cylinder valves for compressed breathable air-Part 2:Threaded connections
KS B ISO 12209-2:2015 Gas cylinders－Outlet connections for gas cylinder valves for compressed breathable air－Part 2：Threaded connections
KS C IEC 60169-25:2013 Radio-frequency connectors－Part 25：Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13.56 mm(0.534 in)
KS B ISO 6162-2003(2008) Hydraulic fluid power－Four－screw split－flange connections for use at 2.5MPa to 40Mpa
KS B ISO 9974-1-2004(2009) Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal to metal sealing - Part 1 Threaded ports

VN-TCVN, Pressure Limits for Threaded Connections

TCVN 7701-2-2007 Pipe threads where pressure-tight joints are made on the threads.Part 2: Verification by means of limit gauges
TCVN 7701-1-2011 Pipe threads where pressure-tight joints are made on the threads.Part 1: Dimensions, tolerances and designation

SE-SIS, Pressure Limits for Threaded Connections

SIS SS-ISO 7/2:1986 Pipe threads where pressure-tight joints are made on the threads - Part 2: Veri- fication by means of limit gauges
SIS SS-ISO 228/2:1988 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges
SIS SMS 1205-1953
SIS SMS 1209-1953
SIS SMS 1203-1953
SIS SMS 1204-1953
SIS SMS 1075-1945
SIS SMS 1076-1945
SIS SMS 1078-1945
SIS SMS 1179-1969 Fire fighting equipment. Coupling part 32 jor pressure hose nternally threaded
SIS SMS 1180-1969 Fire fighting equipment. Coupling part 32 for pressure hose xternally threaded
SIS SMS 1157-1969 Fire fighting equipment. Coupling part 63 for pressure hose Internally threaded
SIS SMS 1158-1969 Fire lighting equipment. Coupling part 63 for pressure hose xternally threaded
SIS SMS 1077-1945
SIS SS-ISO 7/1:1985 Pipe threads where pressure-tight joints are made on the threads - Part 1: Desig- nation, dimensions and tolerances
SIS SS-ISO 228/1:1985 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Designation, dimensions and tolerances

European Committee for Standardization (CEN), Pressure Limits for Threaded Connections

EN 10226-3:2005 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads; Dimensions, tolerances and designation
EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
CEN EN 10226-2-2005 Pipe threads where pressure tight joints are made on the threads — Part 2: Taper, external threads and taper internal threads — Dimensions, tolerances and designation
EN 15908:2010 Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
prEN 60169-25-1993 Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN) (IEC 169-25:1992)
EN ISO 12209-2:2000 Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 2: Threaded Connections ISO 12209-2:2000
EN ISO 18082:2014 Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases (ISO 18082:2014)

KR-KS, Pressure Limits for Threaded Connections

KS B ISO 7-2-2003(2023) Pipe threads where pressure－tight joints are made on the threads－Part 2：Verification by means of limit gauges

Association Francaise de Normalisation, Pressure Limits for Threaded Connections

NF E03-005-2*NF EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2 : verification by means of limit gauges.
NF E03-004:1981 Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).
NF E48-051:1992 Hydraulic fluid power. Pipe threaded connections for supply ports. Connecting dimensions.
NF EN ISO 228-2:2003 Filetages de tuyauterie pour raccordement sans étanchéité dans le filet - Partie 2 : vérification par calibres à limites
NF L05-230-3:1990 AEROSPACE. MJ THREADS. PART 3 : LIMIT DIMENSIONS FOR FITTINGS FOR FLUID SYSTEMS.
NF E49-051:1973 Coupling for pneumatic transmissions. Screwed couplings-metal and plastic pipes.
NF E03-005-1*NF EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1 : dimensions, tolerances and designation.
NF L44-517:1980 Low pressure connections, ISO metric thread profile and tolerances.
NF E29-579:1987 Piping. Fittings with rounded thread. ISO PN 16 and ISO PN 25.
NF E03-004-2*NF EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2 : taper external threads and taper internal threads - Dimensions, tolerances and designation
NF E29-531:1981 Pipework. Threaded fittings with gasket on shoulder.
NF E29-042-4:2010 Flanges and their joints - Bolting - Part 4 : selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC.
NF EN 4833:2018 Série aérospatiale - Système de raccordement interface conique 24o jusqu'à 35 000 kPa (5 080 psi) Raccord à implanter avec bague de sécurité - Série inch - Filetage à pas extra-fin
NF EN 4836:2018 Série aérospatiale - Adaptateur, Système de raccordement interface conique 24o jusqu'à 35 000 kPa (5 080 psi) Implantation pour raccord avec bague de sécurité - Réducteur - Série inch - Filetage à pas extra-fin
NF ISO 12151-4:2008 Raccordements pour transmissions hydrauliques et applications générales - Flexibles de raccordement - Partie 4 : flexibles avec éléments mâles métriques conformes à l'ISO 6149

German Institute for Standardization, Pressure Limits for Threaded Connections

DIN EN 10226-3:2005 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
DIN EN 10226-3:2005-05 Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
DIN EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
DIN 16261:2004 PN 16 cocks with female/female and female/male connection for pressure gauges
DIN 16261:2023-02 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: Date of issue 2023-01-13*Intended as replacement for DIN 16261 (2004-07).
DIN 16261:2004-07 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: To be replaced by DIN 16261 (2019-07), DIN 16261 (2023-02).
DIN 2510-2:1971-08 Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits
DIN EN ISO 228-2:2003-05 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
DIN 16284:2004 Nipple connections for pressure gauges and their accessories
DIN 2510-2:1971 Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits
DIN EN 10226-3 Berichtigung 1:2006-10 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005, Corrigenda to DIN EN 10226-3:2005-05
DIN 3284:1988 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads
DIN 16263:2004-07 PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
DIN 3291:1988 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples
DIN 3287:1988 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes
DIN 3283:1988 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads
DIN EN ISO 228-1 Beiblatt 1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation - Limits of size
DIN EN ISO 228-1 Beiblatt 1:2003-05 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
DIN 16286:2019-04 Screw plugs for connections of pressure gauges
DIN 71428:1989 Compression couplings with olives; cylindrical thread nipples for use with union nuts
DIN 2442:1963 Steel Tubes of Specified Quality Suitable for Screwing; Nominal Pressure 1 to 100
DIN 16262:2004-07 PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges / Note: To be replaced by DIN 16262 (2019-07).
DIN EN ISO 228-1 Bb.1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
DIN 3289:1988 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples
DIN 3285:1988 Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples
DIN EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
DIN 72536:1987 Waterproof thread terminal for the connection of screened high tension ignition cables
DIN 7591:1981 Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10
DIN EN 10226-2:2005-11 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
DIN EN 10226-1:2004-10 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
DIN 3238:2023-03 Couplings for compressed air - Claw coupling, 42 mm internal width, with securing nut - Coupling with male, female and hose connection ends, joint ring / Note: Date of issue 2023-02-17*Intended as replacement for DIN 3238 (2001-11).
DIN 3238:2001-11 Couplings for compressed air - Claw coupling, 42 mm internal width, with securing nut - Coupling with male, female and hose connection ends, joint ring / Note: To be replaced by DIN 3238 (in preparation).
DIN ISO 15171-2:2004 Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 × 2 end for connection under pressure (ISO 15171-2:2000)
DIN 3238:2023-11 Couplings for compressed air - Claw coupling, 42 mm internal width, with securing nut - Coupling with male, female and hose connection ends, joint ring
DIN EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation;English version of DIN EN 10226-2
DIN 2510-2:2023-05 Bolted connections with waisted shank - Part 2: Metric thread with large clearance - Nominal dimensions and limits of size / Note: Date of issue 2023-03-31*Intended as replacement for DIN 2510-2 (1971-08).
DIN 72536:1987-02 Waterproof thread terminal for the connection of screened high tension ignition cables
DIN EN ISO 5356-2:2007 Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2006) English version of DIN EN ISO 5356-2:2007-10
DIN ISO 15171-2:2017 Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 x 2 end for connection under pressure (ISO 15171-2:2016)
DIN 16263:2004 PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
DIN 8912:1990 Coupling nuts and screwed plugs for use with PN 40 flared flange solderless compression couplings in refrigerating systems
DIN EN 1515-4:2022-12 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU; German version EN 1515-4:2021 + AC:2022
DIN 3955:2001 Non-soldering compression fittings with cutting ring - Double ended stud ends with parallel threads and shaft for stud ends type A
DIN 3489:2001-11 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring / Note: To be replaced by DIN 3489 (in preparation).
DIN 3489:2023-03 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring / Note: Date of issue 2023-02-17*Intended as replacement for DIN ...
DIN 3489:2023-11 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring
DIN 11851:1998 Fittings for food, chemical and pharmaceutical industry - Stainless steel screwed pipe connections - Design for rolling in and welding-on
DIN EN ISO 228-1:2003-05 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
DIN 71436:1989-11 Compression couplings with olives; hollow screw fittings and ring connection fittings for use with union nuts
DIN EN 15908:2011 Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases; German version EN 15908:2010
DIN EN 1515-4:2010 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC; German version EN 1515-4:2009

CZ-CSN, Pressure Limits for Threaded Connections

CSN 13 7527-1973 Nipples for pressure gauge connections. Np 640
CSN 13 7522-1973 Reducing pressure gauge connections with female metric and pipe threads. Np 640
CSN 13 7521-1973 Reducíng pressure gauge connections with metric female threads and male pipe threads. Np 640
CSN 11 9036-1988 Hydrostatic and pneumostatic machinery and lubrication systems. Connecting metric threads
CSN 10 9411-1982 United system of industrial pneumatic components Non-return valves and with restriction for pressure pn 0,63; 1,0 a 1,6 MPa Nominal inside diameters and connec- tion threads
CSN 13 7523-1973 Reducing pressure gauge connections with metric left-hand female thread and p:pe female thread. Np 640
CSN 10 9500-1982 United system of industrial pneumatic components Subricators for pressure pn 0,63; 1,0 a 1,6 Mpa Nominal inside diameters and connection threads
CSN 10 9200-1982 United system of industrial pneumatic components Silencers for pressure pn 0,63; 1,0 a 1,6 MPa. Nominal inside diameters and connec- tion threads

TR-TSE, Pressure Limits for Threaded Connections

TS 2595-1977 WOOD - DETERMINATION OF ULTIMATE STRESS ?N COMPRESSION PARALLEL TO GRAIN

International Organization for Standardization (ISO), Pressure Limits for Threaded Connections

ISO 7-2:1982 Pipe threads where pressure-tight joints are made on the threads; Part 2 : Verification by means of limit gauges
ISO 5855-3:1988 Aerospace; MJ threads; part 3: limit dimensions for fitting for fluid systems
ISO 5855-3:1999 Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems
ISO 3787:1976 Wood; Test methods; Determination of ultimate stress in compression parallel to grain
ISO 15171-2:2000 Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 × 2 end for connection under pressure
ISO 15171-2:2016 Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 x 2 end for connection under pressure
ISO 3174:1994 Aircraft - Connections for checking hydraulic systems by ground appliances - Threaded type
ISO 7-1:1994/cor 1:2007 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation; Technical Corrigendum 1
ISO 12209-2:2000 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections

FI-SFS, Pressure Limits for Threaded Connections

SFS Z.3.27-1929 Kierreliittimet imuletkuille Kierrevarsi
SFS Z.3.26-1929 Kierreliittimet imuletkuille Yhdistelm?
SFS Z.3.28-1929 Kierreliittimet imuletkuille Tiivistevarsi

RU-GOST R, Pressure Limits for Threaded Connections

GOST 21972-1976 Threaded piping joint. Nominal (conditional) pressures. Series
GOST 25553-1982 One stage hydraulic cylinders at nominal pressure 16 MPa. Connected threades of rods and plungers
GOST 25020-1984 Hydraulic and pneumatic cylinders. Piston rod and plunger threads
GOST 33530-2015 Assembly tools for standardized tightening of threaded connections. Torque wrenches. General specifications
GOST 15763-2005 Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 15763-1991 Threaded pipe fittings for P nom to 63 MPa (630 kgf/cm<(hoch)2>). General specifications

CU-NC, Pressure Limits for Threaded Connections

NC 90-11-1971 Manometer Accessories. Connecting Piece with Doubles Sided Metric Thread.
NC 54-332-1985 Construction Materials and Products. Sealed Pressure Threaded Connections Connection Screw Threads

PL-PKN, Pressure Limits for Threaded Connections

PN M73134-1966 Hydraulic drive and control equipment
PN M73120-1987 Hydraulic fluid power Threaded pipe connections Tolerances of form and of position
PN H74152-1962 Caat iron pipes and speolal castings for preaaure main lines with acrewed- gland joint. Glanda
PN H74153-1962 Cast iron pipes and special castings for pressure main liries with serewed-gland joint. ?iners
PN M74140-03-1986 Industrial valves Cast iron angle valves, screwed female, for nominal pressure 1,6 MPa
PN M74142-03-1986 Industrial Valves Cast iron angle check valves screwed female for nominal pressure 1,6 MPa
PN M74140-02-1986 Industrial valves Cast iron globe stop valves, screwed female, for nominal pressure 1,6 MPa
PN M74142-02-1986 Industrial valves Cast iron globe check valves screwed female for nominal pressure 1,6 MPa
PN H74155-1962 Cast iron pipes for pressure main lines with screwed-gland joint. Class LA, A and B
PN M75199-1988 Fittings for low presure gas pipings Conical plug valves with threaded connections ends
PN H74163-1962 Cast iron castings for pressur? main lines. 90° sooket bends with sorewed-gland joint
PN H74161-1962 Cast iron special castings for pressure main lines. Socket tapers with screwed-gland Joint
PN-EN 1515-4-2021-08 E Flanges and their joints -- Bolting -- Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU

American National Standards Institute （ANSI), Pressure Limits for Threaded Connections

ANSI/ASME PCC-1-2013 Guidelines for Pressure Boundary Bolted Flange Joint Assembly

American Society for Testing and Materials (ASTM), Pressure Limits for Threaded Connections

ASTM A1108-17(2022) Standard Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams
ASTM E1139/E1139M-12 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

Lithuanian Standards Office , Pressure Limits for Threaded Connections

LST EN 10226-3-2005 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
LST EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
LST EN 10226-1-2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
LST EN 10226-2-2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
LST EN ISO 12209-2:2002 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000)
LST EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)

AENOR, Pressure Limits for Threaded Connections

UNE-EN 10226-3:2005 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
UNE-EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
UNE-EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
UNE-EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
UNE-EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)

IN-BIS, Pressure Limits for Threaded Connections

RO-ASRO, Pressure Limits for Threaded Connections

STAS SR ISO 5855-3:1994 Aerospace - MJ threds - Part 3: Limit dimensions for fittings for fluid systems
STAS 8130-1988 PIPE THREADS WHERE PRESSU RE-TIGHT JOINTS ARE NOT MADE ON THE THREADS Dimensions and tolerances

Society of Automotive Engineers (SAE), Pressure Limits for Threaded Connections

SAE RS-718-1-1972 RS718 Connection, Threaded, Geometry for Low Pressure Corrugated Hose
SAE J1644-1998 Metallic Tube Connections for Fluid Power and General Use - Test Methods for Threaded Hydraulic Fluid Power Connectors
SAE AS4842/2-1995 Fittings, Flareless to Pipe Threaded, Fluid Connection
SAE AS4843/2-1995 Fittings, Beaded to Pipe Threaded, Fluid Connection
SAE AS4875-1995 Fittings, Straight Threaded Boss or Flanged, Fluid Connection
SAE AS5229-2003 PORT, INTERNAL STRAIGHT THREAD, AIR CONNECTION, DESIGN STANDARD
SAE AS34541B-2014 CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, REAR RELEASE CRIMP CONTACT, AN TYPE

IT-UNI, Pressure Limits for Threaded Connections

UNI 6991-1971 Measuring instruments. Go and not go setting plugs for go and not go screw calliper gauges for ISO metric threads with nominal diameter above 18 to 50 mm.

SAE - SAE International, Pressure Limits for Threaded Connections

SAE J1644-1993 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Connectors
SAE J1644-2007 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Connectors
SAE AS4842/2A-2016 Fittings, Flareless to Pipe Threaded, Fluid Connection
SAE AS34541-1998 Connectors@ Receptacle@ Electrical@ Jam Nut Mounting@ Rear Release Crimp Contact@ AN Type (Should Be Used Instead of MS3454)
SAE AS34541A-2012 CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, REAR RELEASE CRIMP CONTACT, AN TYPE

Standard Association of Australia （SAA）, Pressure Limits for Threaded Connections

AS ISO 7.2:2008 Pipe threads where pressure-tight joints are made on the threads - Verification by means of limit gauges

AT-ON, Pressure Limits for Threaded Connections

ONORM M 7390-2/AC1-2000 Gas cylinder valves for test pressures up to max. 300 bar - Types, dimensions, connections, threads (Corrigendum)
ONORM M 7390 Teil.3-1985 Gas cylinder valves for test pressures above 300 bar up to 450 bar; type, dimensions, connections, threads
ONORM M 7390-2-1997 Gas cylinder valves for test pressures up to max. 300 bar - Types, dimensions, connections, threads (includes also corrigendum 1997)

NO-SN, Pressure Limits for Threaded Connections

NS 5580-1983 Pipe threads where pressure-tight joints are made on the threads - Designation, dimensions and tolerances

CH-SNV, Pressure Limits for Threaded Connections

SEV 0147-1940
SN 235 388-1978
SN ISO 105/E10:1984 Textiles - Tests for colour fastness Section B04: Colour fastness to weathering: Xenon arc
VSM 34051-1965
VSM 15365-1955
SNV 95818-1950
SN 429 001-1984 Electrostatic charging — Classification and equipment of rooms
SNV 87270-1935
SNV 137 203.2-1970
VSM 13935-1971

BE-NBN, Pressure Limits for Threaded Connections

ZA-SANS, Pressure Limits for Threaded Connections

SANS 1306-2:1990 Pipe threads where pressure-tight joints are not made on the threads Part 2: Verification by means of limit gauges
SANS 1109-2:2005 Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges

未注明发布机构, Pressure Limits for Threaded Connections

BS 21:1985(1999) Specification for Pipe threads for tubes and fittings where pressure - tight joints are made on the threads (metric dimensions)
BS EN ISO 15245-2:2001(2002) Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 2 : Gauge inspection
BS 2779:1986(1998) Specification for Pipe threads for tubes and fittings where pressure - tight joints are not made on the threads (metric dimensions)
BS EN 1515-4:2021(2022) Flanges and their joints — Bolting Part 4 : Selection of bolting for equipment subject to the Pressure Equipment Directive 2014 / 68 / EU

United States Navy, Pressure Limits for Threaded Connections

NAVY MS24334 REV E REINST NOTICE 2-2008 COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, FLARELESS FITTING TO INTERNAL THREAD BOSS

Professional Standard - Aviation, Pressure Limits for Threaded Connections

HB 6999-1994 Method for determination of tightening torque for threaded conduit (hose) installation

HU-MSZT, Pressure Limits for Threaded Connections

Defense Logistics Agency, Pressure Limits for Threaded Connections

DLA MIL-DTL-28840/23 C-2010 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, GLAND NUT, WIRING
DLA MIL-DTL-28840/23 D-2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, GLAND NUT, WIRING
DLA A-A-55528 A-2008 CONNECTORS, TELECOMMUNICATION, POLARIZED SHELL. PLUG, MALE RACK AND PANEL, SOLDER CONTACT, SCREWLOCK

API - American Petroleum Institute, Pressure Limits for Threaded Connections

API REPORT 79-23-1980 Development of an Analytical Model for the Ultimate Capacity of Axially Loaded Grouted Pile to Jacket Connections

Professional Standard - Petroleum, Pressure Limits for Threaded Connections

SY/T 6418-1999 Round thread casing joint strength with combined internal pressure and bending

North Atlantic Treaty Organization Standards Agency, Pressure Limits for Threaded Connections

STANAG 3698-1997 CONNECTIONS FOR CHECKING AIRCRAFT HYDRAULIC SYSTEMS BY GROUND APPLIANCES - THREADED TYPE

PK-PSQCA, Pressure Limits for Threaded Connections

PS 473-1965 PIPE THREADS FOR GAS LIST TUBES AND SCREWED FITTINGS WHERE PRESSURE-TIGHT JOINTS ARE MADE ON THE THREADS (1/8 INCH TO 6 INCHES)

International Electrotechnical Commission (IEC), Pressure Limits for Threaded Connections

IEC 60169-25:1992 Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN)
IEC 60239:1967 Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces

ES-UNE, Pressure Limits for Threaded Connections

UNE-EN 1515-4:2021 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
UNE-EN 1515-4:2021/AC:2022 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU

YU-JUS, Pressure Limits for Threaded Connections

JUS M.B6.726-1985 Tube fittings andunions with indenting ferrule. Pressuregaugeconnectingnipple. Shape and dimensions

Japanese Industrial Standards Committee (JISC), Pressure Limits for Threaded Connections

JIS B 2351-5:2000 Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections
JIS B 2351-5:2012 Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections

GB-REG, Pressure Limits for Threaded Connections

REG NACA-TN-3431-1955 An Analysis of the Stability and Ultimate Compressive Strength of Short Sheet-Stringer Panels with Special Reference to the Influence of Riveted Connection Between Sheet and Stringer

European Committee for Electrotechnical Standardization（CENELEC）, Pressure Limits for Threaded Connections

EN 61000-3-11:2000 Electromagnetic Compatibility (EMC) Part 3-11: Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems - Equipment with Rated Current Greater than or Equal to 75 A and Subject to Conditional Connection

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pressure Limits for Threaded Connections

GB/T 2878.4-2011 Connections for hydraulic fluid power. Ports and stud ends with metric threads and O-ring sealing. Part 4:Hex plugs

NZ-SNZ, Pressure Limits for Threaded Connections

NZS/BS 21-1985 Pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions) (Incorporating Amendment 1: December 1990)