ZH
RU
ES

nen-iso

nen-iso, Total:260 items.

In the international standard classification, nen-iso involves: .


NL-NEN, nen-iso

  • NEN-ISO 2015:1978 Numbering of weeks
  • NEN-ISO 1746:1993 Rubber or plastics hoses and tubing. Bending tests (ISO 1746: 1983)
  • NEN-ISO 8029:1993 Plastics hose. General purpose collapsible water hose, textile reinforced. Specification (ISO 8029: 1985)
  • NEN-ISO 1539:1993 Information technology. Programming languages. FORTRAN (ISO/IEC 1539:1991)
  • NEN-ISO 2338:1993 Parallel pins, unhardened (ISO 2338:1986)
  • NEN-ISO 2339:1993 Taper pins, unhardened (ISO 2339:1986)
  • NEN-ISO 2340:1993 Clevis pins without head (ISO 2340:1986)
  • NEN-ISO 2341:1993 Clevis pins with head (ISO 2341:1988)
  • NEN-ISO 2917:1992 Meat and meat products. Measurement of pH (reference method)
  • NEN-ISO 3434:1993 Shipbuilding and marine structures. Heated glass panes for ships' rectangular windows (ISO 3434:1992)
  • NEN-ISO 4134:1992 Meat and meat products. Determination of L-(+)-glutamic acid content (referece method)
  • NEN-ISO 4624:1992 Paints and varnishes. Pull-off test for adhesion (ISO 4624:1978)
  • NEN-ISO 4766:1993 Slotted set screws with flat point (ISO 4766:1983)
  • NEN-ISO 4824:1992 Dentistry. Porcelain denture teeth (ISO 4824:1981, modified)
  • NEN-ISO 5165:1992 Diesel fuels. Determination of ignition quality. Cetane method (ISO 5165:1992)
  • NEN-ISO 5199:1993 Technical specifications for centrifugal pumps. Class II (ISO 5199:1986)
  • NEN-ISO 5554:1993 Meat and meat products. Determination of starch content (Reference method)
  • NEN-ISO 5580:1992 Non-destructive testing. Industrial radiograhic illuminators. Minimum requirements (ISO 5580:1985)
  • NEN-ISO 5813:1993 Water quality. Determination of dissolved oxygen. Iodometric method (ISO 5813:1983)
  • NEN-ISO 5817:1993 Arc-welded joints in steel. Guidance on quality levels for imperfections (ISO 5817:1992)
  • NEN-ISO 6595:1993 Water quality. Determination of total arsenic. Silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982)
  • NEN-ISO 7023:1993 Packaging. Sacks. Method of sampling empty sacks for testing (ISO 7023:1983)
  • NEN-ISO 7434:1993 Slotted set screws with cone point (ISO 7434:1983)
  • NEN-ISO 7435:1993 Slotted set screws with long dog point (ISO 7435:1983)
  • NEN-ISO 7436:1993 Slotted set screws with cup point (ISO 7436:1983)
  • NEN-ISO 7963:1992 Calibration block No.2 for ultrasonic examination of welds (ISO 7963:1985)
  • NEN-ISO 8318:1993 Packaging. Complete, filled transport packages. Vibration tests using a sinusoidal variable frequency (ISO 8318:1986)
  • NEN-ISO 8394:1992 Building construction. Jointing products. Determination of extrudability of one-component sealants (ISO 8394:1988)
  • NEN-ISO 8733:1992 Parallel pins with internal thread, unhardened (ISO 8733:1986)
  • NEN-ISO 8734:1992 Parallel pins, hardened (Dowel pins) (ISO 8734:1987)
  • NEN-ISO 8739:1992 Grooved pins. Full-length parallel grooved, with pilot (ISO 8739:1986)
  • NEN-ISO 8740:1992 Grooved pins. Full-length parallel grooved, with chamfer (ISO 8740:1986)
  • NEN-ISO 8741:1992 Grooved pins. Half-length reverse taper grooved (ISO 8741:1986)
  • NEN-ISO 8742:1992 Grooved pins. Third-length centre grooved (ISO 8742:1986)
  • NEN-ISO 8744:1992 Grooved pins. Full-length taper grooved (ISO 8744:1986)
  • NEN-ISO 8745:1992 Grooved pins. Half-length taper grooved (ISO 8745:1986)
  • NEN-ISO 8746:1992 Grooved pins with round head (ISO 8746:1986)
  • NEN-ISO 9046:1992 Building construction. Jointing products. Determination of adhesion/cohesion properties at constant temperature (ISO 9046:1987)
  • NEN-ISO 9048:1992 Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus (ISO 9048:1987)
  • NEN-ISO 9117:1992 Paints and varnishes. Determination of through-dry state and through-dry time. Method of test (ISO 9117:1990)
  • NEN-ISO 9316:1993 Information processing systems. Small Computer Systems Interface (SCSI) (ISO 9316:1989)
  • NEN-ISO 9661:1993 Information processing. Data interchange on 12,7 mm (o,5 in) magnetic tape cartridges. 18 tracks, 1491 data bytes per millimetre (37871 data bytes per inch) (ISO 9661:1988)
  • NEN-ISO 2206:1993 Packaging. Complete, filled transport packages. Identification of parts when testing (ISO 2206:1987)
  • NEN-ISO 2233:1993 Packaging. Complete, filled transport packages. Conditioning for testing (ISO 2233:1986)
  • NEN-ISO 2234:1993 Packaging. Complete, filled transport packages. Stacking tests using static load (ISO 2234:1985)
  • NEN-ISO 2244:1993 Packaging. Complete, filled transport packages. Horizontalimpact tests (horizontal or inclined plane test. Pendulum test) (ISO 2244:1985)
  • NEN-ISO 2247:1993 Packaging. Complete, filled transport packages. Vibration test at fixed low frequency (ISO 2247:1985)
  • NEN-ISO 2248:1993 Packaging. Complete, filled transport packages. Vertical impact test by dropping (ISO 2248:1985)
  • NEN-ISO 2872:1993 Packaging. Complete, filled transport packages. Compression test (ISO 2872:1985)
  • NEN-ISO 2873:1993 Packaging. Complete, filled transport packages. Low pressure test (ISO 2873:1985)
  • NEN-ISO 2874:1993 Packaging. Complete, filled transport packages. Stacking test using compression tester (ISO 2874:1985)
  • NEN-ISO 2875:1993 Packaging. Complete, filled transport packages. Water spray test (ISO 2875:1985)
  • NEN-ISO 2876:1993 Packaging. Complete, filled transport packages. Rolling test (ISO 2876:1985)
  • NEN-ISO 3903:1993 Shipbuilding and marine structures. Ships' ordinary rectangular windows
  • NEN-ISO 4178:1993 Complete, filled transport packages. Distribution trials. Information to be recorded (ISO 4178:1980)
  • NEN-ISO 4671:1993 Rubber and plastics hose and hose assemblies. Methods of measurement of dimensions (ISO 4671:1984)
  • NEN-ISO 4672:1993 Rubber and plastics hoses. Sub-ambient temperature flexibility tests (ISO 4672:1988)
  • NEN-ISO 6428:1992 Technical drawings. Requirements for microcopying
  • NEN-ISO 6777:1993 Water quality. Determination of nitrite. Molecular absorption spectrometric method (ISO 6777:1984)
  • NEN-ISO 6801:1993 Rubber or plastics hoses. Determination of volumetric expansion (ISO 6801:1983)
  • NEN-ISO 6802:1993 Rubber and plastics hose and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing (ISO 6802:1991)
  • NEN-ISO 8028:1993 Rubber and/or plastics hose assemblies for airless paint spraying. Specification (ISO 8028:1987)
  • NEN-ISO 8030:1993 Rubber and plastics hoses for underground mining. Methods of test for flammability (ISO 8030:1987)
  • NEN-ISO 8474:1993 Packaging. Complete, filled transport packages. Water immersion test (ISO 8474:1986)
  • NEN-ISO 8653:1993 Jewellery. Ring-sizes. Definition, measurement and designation (ISO 8653:1986)
  • NEN-ISO 8654:1993 Colours of gold alloys. Definition, range of colours and designation (ISO 8654:1987)
  • NEN-ISO 8692:1993 Water quality. Fresh water algal growth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum (ISO 8962:1989)
  • NEN-ISO 8768:1993 Packaging. Complete, filled transport packages. Toppling test (ISO 8768:1986)
  • NEN-ISO 9202:1993 Jewellery. Fineness of precious metal alloys (ISO 9202:1991)
  • NEN-ISO 9439:1993 Water quality. Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds. Method by analysis of released carbon dioxide (ISO 9439:1990)
  • NEN-ISO 9888:1993 Water quality. Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium. Static test (Zahn-Wellens method) (ISO 9888:1991)
  • NEN-ISO 11094:1993 Acoustics. Test code for the measurement of airborne noise emitted by power lawn mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments (ISO 11094:1991)
  • NEN-ISO 284:1993 Conveyor belts. Electrical conductivity. Specification and method of test (ISO 284:1982)
  • NEN-ISO 2858:1993 End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions (ISO 2858:1975)
  • NEN-ISO 3312:1993 Sintered metal materials and hardmetals. Determination of Young modulus (ISO 3312:1987)
  • NEN-ISO 3326:1993 Hardmetals. Determination of (the magnetization) coercivity (ISO 3326:1975)
  • NEN-ISO 3327:1993 Hardmetals. Determination of transverse rupture strength (ISO 3327:1982)
  • NEN-ISO 3369:1993 Impermeable sintered metal materials and hardmetals. Determination of density (ISO 3369:1975)
  • NEN-ISO 3878:1993 Hardmetals. Vickers hardness test (ISO 3878:1983)
  • NEN-ISO 3907:1993 Hardmetals. Determination of total carbon content. Gravimetric method (ISO 3907:1985)
  • NEN-ISO 3908:1993 Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method (ISO 3908:1985)
  • NEN-ISO 3927:1993 Metallic powders, excluding powders for hardmetals. Determiantion of compactibility (compressibility) in uniaxial compression (ISO 3927:1985)
  • NEN-ISO 3953:1993 Metallic powders. Determination of tap density (ISO 3953:1985)
  • NEN-ISO 3994:1993 Plastics products. Hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)
  • NEN-ISO 3995:1993 Metallic powders. Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
  • NEN-ISO 4003:1993 Permeable sintered metal materials. Determination of bubble test pore size (ISO 4003:1977)
  • NEN-ISO 4492:1993 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering (ISO 4492:1985)
  • NEN-ISO 4496:1993 Metallic powders. Determination of acid insoluble content in iron, copper, tin and bronze powders (ISO 4496:1978)
  • NEN-ISO 4499:1993 Hardmetals. Metallographic determination of microstructure (ISO 4499:1978)
  • NEN-ISO 4503:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method (ISO 4503:1978)
  • NEN-ISO 4505:1993 Hardmetals. Metallographic determination of porosity and uncombined carbon (ISO 4505:1978)
  • NEN-ISO 4506:1993 Hardmetals. Compression test (ISO 4506:1979)
  • NEN-ISO 4883:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method (ISO 4883:1978)
  • NEN-ISO 5814:1993 Water quality. Determination of dissolved oxygen. Electrochemical probe method (ISO 5814:1990)
  • NEN-ISO 8031:1993 Rubber and plastics hose and hose assemblies. Determination of electrical resistance (ISO 8031:1987)
  • NEN-ISO 187:1994 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990)
  • NEN-ISO 638:1994 Pulps. Determination of dry matter content (ISO 638:1978)
  • NEN-ISO 2063:1993 Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys (ISO 2063:1991, modified)
  • NEN-ISO 2592:1994 Petroleum products. Determination of flash and fire points. Cleveland open cup method (ISO 2592:1973)
  • NEN-ISO 2719:1994 Petroleum products and lubricants. Determination of flash point. Pensky-Martens closed cup method (ISO 2719:1988)
  • NEN-ISO 3909:1994 Hardmetals. Determination of cobalt. Potentiometric method (ISO 3909:1976)
  • NEN-ISO 4049:1994 Dentistry. Resin-based filling materials (ISO 4049:1988+A1:1992)
  • NEN-ISO 4501:1994 Hardmetals. Determination of titanium. Photometric peroxide method (ISO 4501:1978)
  • NEN-ISO 4823:1994 Dental elastomeric impression materials (ISO 4823:1992)
  • NEN-ISO 5136:1994 Acoustics. Determination of sound power radiated into a duct by fans. In-duct method (ISO 5136:1990+A1:1993)
  • NEN-ISO 5163:1994 Motor and aviation-type fuels. Determination of knock characteristics. Motor method (ISO 5163:1990)
  • NEN-ISO 5164:1994 Motor fuels. Determination of knock characteristics. Research method (ISO 5164:1990)
  • NEN-ISO 5663:1993 Water quality. Determination of kjeldahl nitrogen. Method after mineralizaton with selenium (ISO 5663:1984)
  • NEN-ISO 5651:1994 Paper, board and pulps. Units for expressing properties (ISO 5651:1989)
  • NEN-ISO 5923:1994 Fire protection. Fire extinguishing media. Carbon dioxide (ISO 5923:1989)
  • NEN-ISO 6246:1994 Petroleum products. Motor gasoline and aviation fuels. Determination of existent gum. Jet evaporation method (ISO 6246:1981)
  • NEN-ISO 7213:1994 Pulps. Sampling for testing (ISO 7213:1981)
  • NEN-ISO 8601:1994 Data elements and interchange formats. Information interchange. Representation of dates and times (ISO 8601:1988+C1:1991)
  • NEN-ISO 8846:1993 Small craft. Electrical devices. Protection against ignition of surrounding flammable gases (ISO 8846:1990)
  • NEN-ISO 8848:1993 Small craft. Remote steering systems (ISO 8848:1990)
  • NEN-ISO 8849:1994 Small craft. Electrically operated bilge-pumps (ISO 8849:1990)
  • NEN-ISO 9283:1993 Manipulating industrial robots. Performance criteria and related test methods (ISO 9283:1990+A1:1991)
  • NEN-ISO 9315:1993 Information processing systems. Interface between flexible disk cartridge drives and their host controllers (ISO 9315:1989)
  • NEN-ISO 9453:1994 Soft solder alloys. Chemical compositions and forms (ISO 9453:1990)
  • NEN-ISO 9775:1993 Small craft. Remote steering systems for single outboards motors of 15 kW to 40 kW power (ISO 9775:1990)
  • NEN-ISO 4185:1994 Measurement of liquid flow in closed conduits. Weighing method (ISO 4185:1980)
  • NEN-ISO 4217:1994 Codes for the representation of currencies and funds (ISO 4217:1990)
  • NEN-ISO 5077:1994 Textiles. Determination of dimensional change in washing and drying (ISO 5077:1984)
  • NEN-ISO 6330:1994 Textiles. Domestic washing and drying procedures for textile testing (ISO 6330:1984)
  • NEN-ISO 7185:1994 Information technology. Programming languages. PASCAL (ISO 7185:1990)
  • NEN-ISO 7813:1994 Identification cards. Financial transaction cards (ISO 7813:1990)
  • NEN-ISO 7828:1994 Water quality. Methods of biological sampling. Guidance on handnet sampling of aquatic benthic macro-invertebrates (ISO 7828:1985)
  • NEN-ISO 8265:1994 Water quality. Design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters (ISO 8265:1988)
  • NEN-ISO 9104:1994 Measurement of fluid flow in xlosed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
  • NEN-ISO 11092:1994 Textiles. Determination of physiological properties. Measurement of thermal and water-vapour resistance under steady-state conditions ("sweat guarded. hotplate test") (ISO 11092:1993)
  • NEN-ISO 8033:1993 Rubber and plastics hose. Determination of adhesion between components (ISO 8033:1991)
  • NEN-ISO 8485:1993 Programming languages. APL (ISO 8485:1989)
  • NEN-ISO 10320:1993 Geotextiles. Identification on site (ISO 10320:1991)
  • NEN-ISO 3661:1993 End-suction centrifugal pumps. Baseplate and installation dimensions (ISO 3661:1977)
  • NEN-ISO 4641:1993 Rubber hoses for water suction and discharge. Specification (ISO 4641:1991)
  • NEN-ISO 8752:1993 Spring-type straight pins, slotted (ISO 8752:1987)
  • NEN-ISO 8872:1993 Aluminium caps for transfusion, infusion and injection bottles. General requirements and test methods (ISO 8872:1988)
  • NEN-ISO 8960:1993 Refrigerators, frozen-food storage cabinets and food freezers for household and similar use. Measurement of emission of airborne acoustical noise (ISO 8960:1991)
  • NEN-ISO 4489:1993 Sintered hardmetals. Sampling and testing (ISO 4489:1978)
  • NEN-ISO 4884:1993 Hardmetals. Sampling and testing of powders using sintered test pieces (ISO 4884:1978)
  • NEN-ISO 5754:1993 Sintered metal materials, excluding hardmetals. Unnotched impact test piece (ISO 5754:1978)
  • NEN-ISO 6922:1993 Adhesives. Determination of tensile strength of butt joints (ISO 6922:1987)
  • NEN-ISO 3015:1994 Petroleum products.Determination of cloud point (ISO 3015:1992)
  • NEN-ISO 10579:1994 Technical drawings.Dimensioning and tolerancing.Non-rigid parts
  • NEN-ISO 9873:1994 Reusable metal dental mirrors and handles(ISO 9873:1990)
  • NEN-ISO 9653:1994 Adhesives.Test methods for shear impact strength of adhesive bonds(ISO 9653:1991)
  • NEN-ISO 8094:1994 Steel cord conveyor belts.Adhesion strength of the cover to core layer(ISO 8094:1984)
  • NEN-ISO 7888:1994 Water quality.Determination of electrical conductivity(ISO 7888:1985)
  • NEN-ISO 7027:1994 Water quality.Determination of turbidity(ISO 7027:1990)
  • NEN-ISO 6847:1994 Covered electrodes for manual metal arc welding.Deposition of a weld metal pad for chemical analysis(ISO 6847:1985)
  • NEN-ISO 6789:1994 Assembly tools for screws and nuts.Hand torque tools.Requirements and test methods(ISO 6789:1992)
  • NEN-ISO 5184:1994 Straight resistance spot welding electrodes(ISO 5184:1979)
  • NEN-ISO 4260:1994 Petroleum products and hydrocarbons.Determination of sulfur content.Wickbold combustion method(ISO 4260:1987)
  • NEN-ISO 1512:1994 Paints and varnishes.Sampling of products in liquid or paste form(ISO 1512:1991)
  • NEN-ISO 439:1994 Steel and iron.Determination of total silicon content.Gravimetric method(ISO 439:1994)
  • NEN-ISO/IEC 9983:1993 Information processing systems. Designation of unrecorded flexible disk cartridges (ISO/IEC 9983:1989)
  • NEN-ISO/IEC 9070:1993 Information technology. SGML support facilities. Registration procedures for public text owners identifiers (ISO/IEC 9070:1991)
  • NEN-ISO/IEC 8877:1993 Information technology. Telecomunications and information exchange between systems. Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T (ISO/IEC 8877:1992)
  • NEN-ISO/IEC 1864:1994 Information processing. Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange. 32 ftpmm (800 ftpi), NRZI, 126 ftpmm (3200 ftpi) phase encoded and 356 ftpmm (9042 ftpi), NRZI (ISO/IEC 1864:1992)
  • NEN-ISO/IEC 8073:1994 Information technology. Telecommunications and information exchange between systems. Open Systems Interconnection (OSI). Protocol for providing the connection-mode transport service (ISO/IEC 8073:1992+A1:1993)
  • NEN-ISO 9004-2:1992 Kwaliteitszorg en elementen van een kwaliteitssysteem. Deel 2: Richtlijnen voor diensten
  • NEN-ISO 286-2:1989 ISO-passingstelsel. Deel 2: Tabellen met standaardtolerantiekwaliteiten en grensmaatafwijkingen voor gaten en assen
  • NEN-ISO 286-1:1989 ISO-passingstelsel. Deel 1: Grondslagen van toleranties, grensmaatafwijkingen en passingen
  • NEN-ISO 1989/A1:1994 Programming languages. COBOL. Intrinsic function module (ISO 1989:1985/A1:1992)
  • NEN-ISO 9241-1:1993 Ergonomie requirements for office work with visual display terminals (VDTs). Part 1: General introduction (ISO 9241-1:1992)
  • NEN-ISO 9241-2:1993 Ergonomie requirements for office work with visual display terminals (VDTs). Part 2: Guidance on task requirements (ISO 9241-2:1992)
  • NEN-ISO 140-10:1992 Acoustics. Measurement of sound insulation in buildings and of building elements. Part 10: Laboratory measurement of airborne sound insulation of small building elements
  • NEN-ISO 898-6:1993 Mechanical properties of fasteners. Part 6: Nuts with specified proof load values. Fine pitch thread (ISO 898-6:1988)
  • NEN-ISO 4180-1:1993 Complete, filled transport packages. General rules for the compilation of performance test schedules. Part 1: General principles (ISO 4180-1:1980)
  • NEN-ISO 4180-2:1993 Complete, filled transport packages. General rules for the compilation of performance test schedules. Part 2: Quantitative data (ISO 4180-2:1980)
  • NEN-ISO 4869-1:1993 Acoustics. Hearing protectors. Subjective method for the measurement of sound attenuation (ISO 4869-1:1990)
  • NEN-ISO 6591-1:1993 Packaging. Sacks. Description and method of measurement. Part 1: Empty paper sacks (ISO 6591-1:1984)
  • NEN-ISO 6591-2:1993 Packaging. Sacks. Description and method of measurement. Part 2: Empty sacks made from thermoplastic flexible film (ISO 6591-2:1985)
  • NEN-ISO 7965-1:1993 Packaging. Sacks. Drop test. Part 1: Paper sacks (ISO 7965-1:1984)
  • NEN-ISO 8651-1:1993 Information processing systems. Computer graphics. Graphical Kernel System (GKS) language bindings. Part 1: FORTRAN (ISO 8651-1:1988)
  • NEN-ISO 8651-2:1993 Information processing systems. Computer graphics. Graphical Kernel System (GKS) language bindings. Part 2: PASCAL (ISO 8651-2:1988)
  • NEN-ISO 8651-3:1993 Information processing systems. Computer graphics. Graphical Kernel System (GKS) language bindings. Part 3: ADA (ISO 8651-3:1988)
  • NEN-ISO 8662-1:1993 Hand-held portable power tools. Measurement of vibrations at the handle. Part 1: General (ISO 8662-1:1988)
  • NEN-ISO 6599-1:1993 Packaging. Sacks. Conditioning for testing. Part 1: Paper sacks (ISO 6599-1:1983)
  • NEN-ISO 3923-1:1993 Metallic powders. Determination of apparent density. Part 1: Funnel method (ISO 3923-1:1979)
  • NEN-ISO 3923-2:1993 Metallic powders. Determination of apparent density. Part 2: Scott volumeter method (ISO 3923-2:1981)
  • NEN-ISO 4491-1:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 1: General guidelines (ISO 4491-1:1989)
  • NEN-ISO 4491-2:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1989)
  • NEN-ISO 4491-4:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 4: Total oxygen by reduction-extraction (ISO 4491-4:1989)
  • NEN-ISO 1942-1:1993 Dental vocabulary. Part 1: General and clinical terms (ISO 1942-1:1989)
  • NEN-ISO 1942-2:1994 Dental vocabulary. Part 2: Dental materials (ISO 1942-2:1989)
  • NEN-ISO 1942-3:1994 Dental vocabulary. Part 3: Dental instruments (ISO 1942-3:1989)
  • NEN-ISO 3134-1:1993 Light metals and their alloys. Terms and definitions. Part 1: Materials (ISO 3134-1:1985)
  • NEN-ISO 3134-2:1993 Light metals and their alloys. Terms and definitions. Part 2: Unwrought products (ISO 3134-2:1985)
  • NEN-ISO 8630-1:1993 Information processing. Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks each side. Part 1: Dimensional, physical and magnetic characteristics (ISO 8630-1:1987)
  • NEN-ISO 8630-2:1993 Information processing. Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks each side. Part 2: Track format A for 77 tracks (ISO 8630-2:1987)
  • NEN-ISO 8630-3:1993 Information processing. Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks each side. Part 3: Track format B for 80 tracks (ISO 8630-3:1987)
  • NEN-ISO 9454-1:1994 Soft soldering fluxes. Classification and requirements. Part 1: Classification, labelling and packaging (ISO 9454-1:1990)
  • NEN-ISO 9455-1:1994 Soft soldering fluxes. Test methods. Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:1990)
  • NEN-ISO 9992-1:1994 Financial transaction cards. Messages between the integrated circuit card and the card accepting device. Part 1: Concepts and structures (ISO 9992-1:1990)
  • NEN-ISO 10202-1:1994 Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Part 1: Card life cycle (ISO 10202-1:1991)
  • NEN-ISO 1942-4:1994 Dental vocabulary. Part 4: Dental equipment (ISO 1942-1:1989)
  • NEN-ISO 3134-3:1993 Light metals and their alloys. Terms and definitions. Part 3: Wrought products (ISO 3134-3:1985)
  • NEN-ISO 5667-1:1994 Water quality. Sampling. Part 1: Guidance on the design of sampling programmes (ISO 5667-1:1980)
  • NEN-ISO 6360-2:1994 Dentistry. Dental rotary instruments. Number coding system. Part 2: Shape and specific characteristics (ISO 6360-2:1986+A1:1991)
  • NEN-ISO 7785-2:1994 Dental handpieces. Part 2: Straight and geared angle handpieces (ISO 7785-2:1991)
  • NEN-ISO 7787-3:1994 Dental rotary instruments. Cutters. Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991)
  • NEN-ISO 9314-2:1994 Information processing systems. Fibre Distributed Data Interface (FDDI). Part 2: Token Ring Media Access Control (MAC)(ISO 9314-2:1989)
  • NEN-ISO 9314-1:1994 Information processing systems. Fibre Distributed Data Interface (FDDI). Part 1: Token Ring Physical Layer Protocol (PHY) (ISO 9317-1:1989)
  • NEN-ISO 9367-1:1994 Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirements. Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (ISO 9367-1:1989)
  • NEN-ISO 10011-1:1994 Guidelines for auditing quality systems. Part 1: Auditing (ISO 10011-1:1990)
  • NEN-ISO 10011-2:1994 Guidelines for auditing quality systems. Part 2: Qualification criteria for quality systems auditors (ISO 10011-2:1991)
  • NEN-ISO 10993-3:1994 Biological evaluation of medical devices. Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:1992)
  • NEN-ISO 10993-4:1994 Biological evaluation of medical devices. Part 4: Selection of tests for interaction with blood (ISO 10993-4:1992)
  • NEN-ISO 9455-8:1993 Soft soldering fluxes. Test methods. Part 8: Determination of zinc content (ISO 9455-8:1991)
  • NEN-ISO 8362-2:1993 Injection containers for injectables and accessories. Part 2: Closures for injection vials (ISO 8362-2:1988)
  • NEN-ISO 8362-4:1993 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass (ISO 8362-4:1989)
  • NEN-ISO 9455-11:1993 Soft soldering fluxes. Test methods. Part 11: Solubility of flux residues (ISO 9455-11:1991)
  • NEN-ISO 9455-5:1993 Soft soldering fluxes. Test methods. Part 5: Copper mirror test (ISO 9455-5:1992)
  • NEN-ISO 9455-14:1993 Soft soldering fluxes. Test methods. Part 14: Assessment of tackiness of flux residues (ISO 9455-14:1991)
  • NEN-ISO 898-2:1994 Mechanical properties of fasteners. Part 2: Nuts with specified proof load values. Coarse thread
  • NEN-ISO 9000-3:1994 Quality management and quality assurance standards. Part 3: Guidelines for the application of ISO 9001 to the development, supply and maintenance of software (ISO 9000-3: 1991)
  • NEN-ISO 140-2:1993 Acoustics. Measurement of sound insulation in buildings. and of building elements. Part 2: Determination, verification and application of precision data (ISO 104-2:1991)
  • NEN-ISO 7627-1:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 1: General requirements (ISO 7627-1:1983)
  • NEN-ISO 7627-2:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) (ISO 7627-2:1983)
  • NEN-ISO 7627-3:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 3: Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) (ISO 7627-3:1983)
  • NEN-ISO 7627-4:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 4: Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) (ISO 7627-4:1983)
  • NEN-ISO 7627-5:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) (ISO 7627-5:1983)
  • NEN-ISO 7627-6:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985)
  • NEN-ISO 8510-1:1993 Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. Part 1: 90 degree peel (ISO 8510-1:1990)
  • NEN-ISO 8510-2:1993 Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. Part 2: 180 degree peel (ISO 8510-2: 1990)
  • NEN-ISO 9241-3:1993 Ergonomic requirements for office work with visual display terminals (VDTs). Part 3: Visual display requirements (ISO 9241-3:1992)
  • NEN-ISO 6590-2:1994 Packaging.Sacks.Vocabulary and types.Part 2:Sacks made from thermoplastic flexible film(ISO 6590-2:1986)
  • NEN-ISO 6410-2:1994 Technical drawings.Screw threads and threaded parts.Part 2:Screw thread inserts
  • NEN-ISO 3134-2:1994 Light metals and their alloys.Terms and definitions.Part 2:Unwrought products(ISO 3134-2:1985)
  • NEN-ISO 3098-2:1994 Technical drawings.Lettering.Part 2:Greek characters(ISO 3098-2:1984)
  • NEN-ISO 3098-1:1994 Technical drawings.Lettering.Part 1:Currently used characters(ISO 3098-1:1974)
  • NEN-ISO 8806-4:1993 Information technology. Computer graphics. Graphical Kernel System for Three Dimensions (GKS-3D) language bindigns. Part 4: C (ISO/IEC 8806-4:1991)
  • NEN-ISO/IEC 9171-1:1993 Information technology. 130 mm optical disk cartridge, write once, for information interchange. Part 1: Unrecorded optical disk cartridge (ISO/IEC 9171-1:1990)
  • NEN-ISO/IEC 9171-2:1993 Information technology. 130 mm optical disk cartridge, write once, for information interchange. Part 2: Recording format (ISO/IEC 9171-2:1990)
  • NEN-ISO 105-C04:1993 Textiles. Tests for colour fastness. Part C04: Colour fastness to washing. Test 4 (ISO 105-C04:1989)
  • NEN-ISO/IEC 8632-1:1994 Information technology. Computer graphics. Metafile for the storage and transfer of picture description information. Part 1: Functional specification (ISO/IEC 8632-1:1992)
  • NEN-ISO/IEC 8632-2:1994 Information technology. Computer graphics. Metafile for the storage and transfer of picture description information. Part 2: Character encoding (ISO/IEC 8632-2:1992)
  • NEN-ISO/IEC 8632-3:1994 Information technology. Computer graphics. Metafile for the storage and transfer of picture description information. Part 3: Binary encoding (ISO/IEC 8632-3:1992)
  • NEN-ISO/IEC 8632-4:1994 Information technology. Computer graphics. Metafile for the storage and transfer of picture description information. Part 4: Clear text encoding (ISO/IEC 8632-4:1992)
  • NEN-ISO/IEC 9318-2:1994 Information technology. Intelligent peripheral interface. Part 2: Device specific command set for magnetic disk drives (ISO/IEC 9318-2:1990)
  • NEN-ISO/IEC 9318-3:1994 Information technology. Intelligent peripheral interface. Part 3: Device generic command set for magnetic and optical disk drives (ISO/IEC 9318-3:1990)
  • NEN-ISO/IEC 9318-4:1994 Information technology. Intelligent peripheral interface. Part 4: Device generic command set for magnetic tape drives (ISO/IEC 9318-4:1990)
  • NEN-ISO/IEC 9506-4:1994 Industrial automation systems. Manufacturing Message Specification. Part 4: Companion standard for numerial control (ISO/IEC 9506-4:1992)
  • NEN-ISO/IEC 9506-2:1993 Industrial automation systems. Manufacturing Message Specification. Part 2: Protocol specification (ISO/IEC 9506-2:1990)
  • NEN-ISO/IEC 9506-3:1993 Industrial automation systems. Manufacturing Message Specification. Part 3: Companion standard for robotics (ISO/IEC 9506-3:1991)
  • NEN-ISO/IEC 9646-3:1994 Information technology. Open Systems Interconnection (OSI). Conformance testing methodology and framework. Part 3: The Tree and Tabular Combined Notation (TTCN) (ISO/IEC 9646-3:1992)
  • NEN-ISO 8630-2/A1:1994 Information processing. Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side. Part 2: Track format A for 77 tracks (ISO 8630-2:1987/A1:1992)
  • NEN-ISO 8630-3/A1:1994 Information processing. Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side. Part 3: Track format B for 80 tracks (ISO 8630-3:1987/A1:1992)
  • NEN-ISO/IEC ISP 10607-1:1994 Information technology. International Standardized Profiles AFTnn. File transfer, Access and Management. Part 1: Specification of ACSE, Presentation and Session Protocols for use by FTAM (ISO/IEC ISP 10607-1:1990)
  • NEN-ISO/IEC ISP 10607-2:1994 Information technology. International Standardized Profiles AFTnn. File transfer, Access and Management. Part 2: Definition of document types, constraint sets and syntaxes (ISO/IEC ISP 10607-2:1990+A1:1991)
  • NEN-ISO/IEC ISP 10607-3:1994 Information technology. International Standardized Profiles AFTnn. File transfer, Access and Management. Part 3: AFT 11. Simple File Transfer Service (unstructured) (regional variant ofISO/IEC ISP 10607-3:1990)
  • NEN-ISO/IEC ISP 10607-4:1994 Information technology. International Standardized Profiles AFTnn. File transfer, Access and Management. Part 4: AFT 12. Positional File Transfer Service (Flat) (regional variant of ISO/IEC ISP 10607-4:1991)
  • NEN-ISO/IEC ISP 10607-5:1994 Information technology. International Standardized Profiles AFTnn. File transfer, Access and Management. Part 5: AFT 22. Positional File Access Service (Flat) (regional variant of ISO/IEC ISP 10607-5:1991)
  • NEN-ISO/IEC ISP 10607-6:1994 Information technology. International Standardized Profiles AFTnn. File transfer, Access and Management. Part 6: AFT 3. File Management Service (ISO/IEC ISP 10607-6:1991)
  • NEN-ISO/IEC 7816-3/A1:1994 Identification cards. Integrated circuit(s) cards with contacts. Part 3: Electronic signals and transmission protocols (ISO/IEC 7816-3:1989/A1:1992)
  • NEN-ISO/IEC 9592-1/A1:1993 Information processing systems. Computer graphics. Programmer's Hierarchical Interactive Graphics Systems (PHIGS). Part 1: Functional description (ISO/IEC 9592-1:1989/A1:1992)
  • NEN-ISO/IEC 9592-2/A1:1993 Information processing systems. Computer graphics. Programmer's Hierarchical Interactive Graphics Systems (PHIGS). Part 2: Archive file format (ISO/IEC 9592-2:1989/A1:1992)
  • NEN-ISO/IEC 9592-3/A1:1993 Information processing systems. Computer graphics. Programmer's Hierarchical Interactive Graphics Systems (PHIGS). Part 3: Clear-text encoding of archive file (ISO/IEC 9592-3:1989/A1:1992)
  • NEN 2726-1992 Haulage quality system - Road haulage - Additional safety requirements to the interpretation of NEN-ISO 9002 for haulage of dangerous goods in bulk

  nen-iso.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved