ZH
RU
ES
gear load
gear load, Total:68 items.
In the international standard classification, gear load involves: Gears, Shipbuilding and marine structures in general.
SE-SIS, gear load
AIA/NAS - Aerospace Industries Association of America Inc., gear load
- NAS1076-1978 Lubricant@ High Gear Loading@ All Weather (Rev 2)
Aerospace Industries Association, gear load
British Standards Institution (BSI), gear load
- BS ISO 6336-3:2019 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
- BS ISO 6336-6:2019 Calculation of load capacity of spur and helical gears - Calculation of service life under variable load
- PD ISO/TS 6336-4:2019 Calculation of load capacity of spur and helical gears. Calculation of tooth flank fracture load capacity
- PD ISO/TS 6336-20:2022 Calculation of load capacity of spur and helical gears. Calculation of scuffing load capacity. Flash temperature method
- PD ISO/TS 6336-22:2018 Tracked Changes. Calculation of load capacity of spur and helical gears. Calculation of micropitting load capacity
- BS ISO 6336-5:2016 Tracked Changes. Calculation of load capacity of spur and helical gears. Strength and quality of materials
- BS ISO 6336-1:1997 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
- BS ISO 6336-1:1996 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
- BS ISO 6336-1:2006 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
- BS ISO 6336-1:2019 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
- PD ISO/TR 6336-31:2018 Tracked Changes. Calculation of load capacity of spur and helical gears. Calculation examples of micropitting load capacity
- BS ISO 10300-2:2023 Calculation of load capacity of bevel gears - Calculation of surface durability (macropitting)
- 18/30377016 DC BS ISO 6336-3. Calculation of load capacity of spur and helical gears. Part 3. Calculation of tooth bending strength
- PD ISO/TR 6336-30:2022 Calculation of load capacity of spur and helical gears. Calculation examples for the application of ISO 6336 parts 1,2,3,5
- PD ISO/TS 6336-21:2022 Calculation of load capacity of spur and helical gears. Part 21: Calculation of scuffing load capacity — Integral temperature method
- 18/30377019 DC BS ISO 6336-6. Calculation of load capacity of spur and helical gears. Part 6. Calculation of service life under variable load
- 18/30377013 DC BS ISO 6336-2. Calculation of load capacity of spur and helical gears. Part 2. Calculation of surface durability (pitting)
- 18/30377010 DC BS ISO 6336-1. Calculation of load capacity of spur and helical gears. Part 1. Basic principles, introduction and general influence factors
- BS ISO 9083:2001 Calculation of load capacity of spur and helical gears - Application to marine gears
- 22/30402445 DC BS ISO 10300-2. Calculation of load capacity of bevel gears - Part 2. Calculation of surface durability (pitting)
- BS ISO 6336-2:2019 Calculation of load capacity of spur and helical gears - Calculation of surface durability (pitting)
- PD ISO/TS 14521:2020 Gears. Calculation of load capacity of worm gears
Taiwan Provincial Standard of the People's Republic of China, gear load
- CNS 5980-1984 Load Capacity for Gears
- CNS 5984-1984 Calculation of Load Capacity on Tooth Root for Bevel Gears
- CNS 5982-1984 Calculation of Load Capacity on Tooth Root for Cylindrical Gears
- CNS 5985-1984 Calculation of Load Capacity on Tooth Flank for Bevel Gears
- CNS 5986-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears - Tooth form Factor YF
- CNS 5983-1984 Calculation of Load Capacity on Tooth Flank for Cylindrical Gears
- CNS 6409-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Material Factor ZM
- CNS 6411-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Contact Ratio Factor Zε
- CNS 6412-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Helix Angle Factor Yβ
- CNS 6408-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Zone Factor ZH
- CNS 6407-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Load Sharing Factor Yε and Overlap Ratio εβ
- CNS 6410-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Pinion Single Tooth Contact Factor ZB Wheel Single Tooth Contact Factor ZD and Transverse Contact Ratio εα
American Gear Manufacturers Association, gear load
未注明发布机构, gear load
- BS ISO 6336-3:2019(2020) Calculation of load capacity of spur and helical gears Part 3 : Calculation of tooth bending strength
- BS ISO 6336-2:2019(2020) Calculation of load capacity of spur and helical gears Part 2 : Calculation of surface durability (pitting)
Association Francaise de Normalisation, gear load
- XP ISO/TS 6336-22:2019 Calcul de la capacité de charge des engrenages à dentures droite et hélicoïdale - Partie 22 : calcul de la capacité de charge aux micropiqûres
- NF ISO 6336-6:2020 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 6 : calcul de la durée de vie en service sous charge variable
- NF E23-030-5*NF ISO 6336-5:2017 Calculation of load capacity of spur and helical gears - Part 5 : strength and quality of materials
- NF ISO 6336-5:2017 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 5 : résistance et qualité des matériaux
- NF E23-030-6*NF ISO 6336-6:2020 Calculation of load capacity of spur and helical gears - Part 6 : calculation of service life under variable load
- NF E23-030-2*NF ISO 6336-2:2020 Calculation of load capacity of spur and helical gears - Part 2 : calculation of surface durability (pitting)
- XP ISO/TS 6336-20:2022 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 20 : Calcul de la capacité de charge au grippage - Méthode de la température-éclair
- XP ISO TS 6336-21:2022 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 21 : Calcul de la capacité de charge au grippage - Méthode de la température intégrale
- NF E23-030-1*NF ISO 6336-1:2020 Calculation of load capacity of spur and helical gears - Part 1: basic principles, introduction and general influence factors
- NF ISO 6336-1:2020 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 1 : principes de base, introduction et facteurs généraux d'influence
- FD ISO/TR 6336-30:2023 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 30 : exemples d'application de l'ISO 6336 parties 1,2,3,5
- FD ISO/TR 6336-31:2019 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 31 : exemples de calcul de la capacité de charge aux micropiqûres
- FD E23-030-30*FD ISO/TR 6336-30:2018 Calculation of load capacity of spur and helical gears - Part 30 : calculation examples for the application of ISO 6336 parts 1,2,3,5
- NF ISO 6336-2:2020 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 2 : calcul de la tenue en fatigue à la pression de contact (écaillage)
German Institute for Standardization, gear load
- DIN 3990-6:1994 Calculation of load capacity of cylindrical gears - Part 6: Calculation of service strength
- DIN 3991-2:2023-08 Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (macropitting) / Note: Date of issue 2023-07-14*Intended as replacement for DIN 3991-2 (1988-09).
IT-UNI, gear load
International Organization for Standardization (ISO), gear load
- ISO 6336-2:2019 Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting)
- ISO/CD TR 10300-30:2023 Calculation of load capacity of bevel gears — Part 30: ISO rating system for bevel and hypoid gears — Sample calculations
- ISO/DTR 10300-30:2023 Calculation of load capacity of bevel gears — Part 30: ISO rating system for bevel and hypoid gears — Sample calculations
- ISO/TR 14521:2010 Gears - Calculation of load capacity of wormgears
Korean Agency for Technology and Standards (KATS), gear load
- KS B ISO 10300-1:2004 Calculation of load capacity of bevel gears-Part 1:Introduction and general influence factors
- KS B ISO 10300-2:2004 Calculation of load capacity of belvel gears-Part 2:Calculation of surface durability(pitting)
- KS B ISO 9083:2004 Calculation of load capacity of spur and helical gears-Application to marine gears
- KS B ISO 6336-3-2015(2020) Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
AGMA - American Gear Manufacturers Association, gear load
- 12FTM05-2012 Combined Effects of Gravity@ Bending Moment@ Bearing Clearance@ and Input Torque on Wind Turbine Planetary Gear Load Sharing