ZH
RU
ES

insulator

insulator, Total:319 items.

In the international standard classification, insulator involves: Insulation, Insulating fluids, Rails and railway components, Quality, Vocabularies, Electronic components in general, Inks. Printing inks, Internal combustion engines for road vehicles, Road vehicle systems, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Aerospace electric equipment and systems, Vibrations, shock and vibration measurements, Fibre optic communications, Electric traction equipment, Electrical accessories, Electronic tubes, Heat recovery. Thermal insulation, Radiocommunications.


FI-SFS, insulator

GM Europe, insulator

SE-SIS, insulator

  • SIS SS IEC 506:1982 Insulators — High-voltage insulators — Switching impulse tests
  • SIS SS IEC 233:1984 Insulators — Tests ort hollow insulators for use in electrical equipment
  • SIS SEN 24 05 21-1968 Line post insulators
  • SIS SS IEC 433:1982 Insulators — String insulator units of the long rod type - Dimensions and characteristics
  • SIS SS IEC 120:1986 Insulators - Bali and socket couplings of string insulator units - Dimensions
  • SIS SS IEC 475:1986 Insulating oils - Method for sampling liquid dielectrics
  • SIS SEN 04 05 27
  • SIS SEN 24 12 71-1973 Line material. Insulators and accessohes. Survey
  • SIS SS IEC 383:1984 Insulators — Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1000 V
  • SIS SS IEC 305:1982 Insulators — String insulator units of the cap and pin type - Dimensions and characteristics
  • SIS SS IEC 575:1982 Insulators - Thermal-mechanical performance test and mechanical performance test on string insulator units
  • SIS SS IEC 372:1986 Insulators - Locking devices for ball and socket couplings ofstring insulator units - Dimensions and tests
  • SIS SS IEC 137:1982 Insulators — Bushings for alternating voltages above 1000 V
  • SIS SS IEC 660:1982 Insulators - Indoor post insulators of organic material for systems with nominal voltages greater than 1000 V up to but not including 300 kV — Tests
  • SIS SS 404 09 24-1992 Solid insulating materials - Methods of test for electric strength of solid insulating materials
  • SIS SEN 24 06 00-1975 Insulators. Survey of standards. International recommendations' validity as Swedish standard

Taiwan Provincial Standard of the People's Republic of China, insulator

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., insulator

Korean Agency for Technology and Standards (KATS), insulator

Association Francaise de Normalisation, insulator

  • NF P75-305:1987 Isolants thermiques de bâtiment manufacturés - Détermination conventionnelle du caractère de non hydrophilie des isolants rigides et semi-rigides
  • NF P75-303:1987 Isolants thermiques de bâtiment manufacturés - Détermination de l'absorption d'eau par aspersion des isolants rigides et semi-rigides - Non hydrophilie.
  • NF EN 60426:2016 Matériaux isolants électriques - Détermination de la corrosion électrolytique en présence de matériaux isolants - Méthodes d'essais
  • NF EN 62223:2010 Isolateurs - Lexique de termes et définitions
  • NF C26-125:1972 Isolants solides - Produits à base de mica, souples - Spécifications.
  • NF C26-121:1971 Isolants solides - Produits à base de mica - Pièces moulées - Règles.
  • NF C27-961*NF EN IEC 62961:2018 Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with the ring method
  • NF EN IEC 61125:2018 Isolants liquides - Méthodes d'essai de la stabilité à l'oxydation - Méthode d'essai pour évaluer la stabilité à l'oxydation des isolants liquides tels que livrés
  • NF P75-304:1987 Isolants thermiques de bâtiment manufacturés - Détermination de l'absorption d'eau par capillarite des isolants rigides et semi-rigides - Non hydrophilie.
  • NF C66-532:1974 Insulators and Fitting for Overhead Lines Glass insulators Sub-station lead-in(E)
  • NF C26-925:1965 Méthodes d'essai des vernis isolants - Mesure de la rigidité diélectrique.
  • UTE C26-170:1986 Isolants solides - Fibres vulcanisées à usages électriques. Recueil des spécifications particulières.
  • NF C26-122:1971 Isolants solides - Produits à base de mica, en rouleaux - Spécifications.
  • NF C27-350*NF EN 61039:2008 Classification of insulating liquids.
  • NF EN 61039:2008 Classification des liquides isolants
  • NF EN 50497:2008 Méthode d'essai recommandée pour l'évaluation du risque d'exsudation de plastifiant des gaines des câbles et des isolants en PVC
  • NF EN IEC 63012:2019 Isolants liquides - Esters neufs modifiés ou mélangés pour applications électrotechniques
  • NF C27-475*NF EN 60475:2012 Method of sampling insulating liquids
  • NF C27-350:1993 General classification of insulating liquids.
  • NF EN 60672-1:1995 Matériaux isolants à base de céramique ou de verre - Partie 1 : définitions et classification.
  • NF C33-100:1965 Insulated conductors for power systems. Impregnated paper-insulated lead-sheathed cables.
  • NF EN 61197:1995 Isolants liquides - Propagation linéaire de la flamme - Méthode d'essai utilisant un ruban en fibres de verre
  • NF C93-864-1:2009 Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1 : generic specification.
  • NF EN 60672-3:1998 Matériaux isolants à base de céramique ou de verre - Partie 3 : spécifications pour matériaux particuliers.

PL-PKN, insulator

  • PN E06323-1990 High yoltage insulators Ceramic rod insulators Ultrasonic and texture tests
  • PN E06325-1991 Tests on hollow insulators for use in electrical equipment
  • PN E91056-1990 High voltage insulators Long rod insulators from ceramic materia? for overhead lines
  • PN E06321-1986 High voltage insulators Bushings General requirements and testing specifications
  • PN E04160-16-1989 Electric cab?es Methods of testing Test of the stripping properties of insuiation
  • PN E04417-1988 Insulating li?uids Test method for oxidation stability ot inhibited minera? insulating oils

VE-FONDONORMA, insulator

Defense Logistics Agency, insulator

CZ-CSN, insulator

Aerospace Industries Association/ANSI Aerospace Standards, insulator

German Institute for Standardization, insulator

  • DIN 48050-2:1963-01 Insulator pin, cylindrical
  • DIN 46262-1:1988-09 Low-voltage stud-terminals; insulators
  • DIN 48154-1:1959 Power current overhead lines; shackle insulators S, insulator bodies
  • DIN/TS 46262-1:2023 Low-voltage stud-terminals - Part 1: Insulators / Note: Date of issue 2023-02-24*Intended as replacement for DIN 46262-1 (1988-09).
  • DIN 46264:1988-06 High-voltage feed-through terminals with cast resin insulator
  • DIN IEC/TS 62073:2016 Guidance on the measurement of hydrophobicity of insulator surfaces (IEC/TS 62073:2016)
  • DIN IEC/TS 62073:2013 Guidance on the measurement of hydrophobicity of insulator surfaces (IEC 36/332/CD)
  • DIN 43167-3:1987 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c; insulator
  • DIN 46265-1:1988 High-voltage feed-through terminals with ceramic insulator; compilation
  • DIN 46265-2:1988 High-voltage feed-through terminals with ceramic insulator; parts list

YU-JUS, insulator

  • JUS N.A0.471-1992 Insulators. Terms and definitions
  • JUS N.C0.054-1990 Testing of insulated conductors and cables. Shrinking
  • JUS N.C0.055-1980 Testing of insulated conductors and cables. Hot deformatian
  • JUS N.C0.050-1984 Electrical power andlighting. Tests of insulatedconductors and cables. I/Vear resistance
  • JUS N.C0.057-1979 Tests ofinsulated conductors and cables. Stability ofinsulation to fillers
  • JUS N.C0.035-1983 Tatting of insulatad conductors and cables. Measurement of electrical resistance of conductors.
  • JUS N.C0.055-1985 Electric povverandlighting. Testing of insulatedconductors andcables. Hotdeformation
  • JUS N.C0.049-1984 Electrical povver and lighting. Testing of insulated conductors and cables. Density of insulation and sheath
  • JUS N.C0.052-1984 Electrical povner and lighting. Testing of insulated conductors andcables. Flexibility
  • JUS N.C0.056-1985 Electrical povverand lighting\ Testing of insulatedconductors andcables. Elasticity atlow temperatures
  • JUS IEC 1039:1994 General classification of insulating liquids
  • JUS N.C0.045-1984 Electrical power and lighting. Testing of insulated conductors and cables.Test for resistance of PVC insulation andsheath to cracking
  • JUS N.C0.030-1987 E/etric povver and lighting. Testing of insulated conductors and cab/es. General testing conditions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, insulator

  • GB/T 25097-2010 Insulating live-working washing agent
  • GB/T 25098-2010 Live washing regulation of insulating live-working washing agent
  • GB/T 27750-2011 Classification of insulating liquids
  • GB/T 21221-2022 Insulating liquids—Specifications for unused liquids based on synthetic aromatic hydrocarbons
  • GB/T 21221-2007 Insulating liquids.Specifications for unused insulating liquids based on synthetic aromatic hydrocarbons
  • GB/T 22709-2008 Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric

AIA/NAS - Aerospace Industries Association of America Inc., insulator

Indonesia Standards, insulator

  • SNI 04-6627-2001 Insulator for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c. systems - Characteristic of insulator units of the long road type
  • SNI 11-4041-1996 Metal insulators for railway rail elastic ties
  • SNI 04-0682-1989 Medium - voltage supported ceramic insulators, pin type
  • SNI 04-0574-1989 Low voltage ceramic insulator body, Compression and tensile strength.
  • SNI IEC 60050-471:2012 International Electrotechnical Vocabulary - Part 471: Insulators
  • SNI 04-0681-1989 Medium voltage hang ceramic insulators, ball type and joint coupling
  • SNI 04-0352-1989 Ceramic insulators, straining pin type, Specification and test method
  • SNI 04-1712-1989 Rubber compound for electric cable insulators and sheaths, Requirement
  • SNI 04-0529-1989 Low voltage ceramic insulators, roll type (R), Specification and test method
  • SNI 04-0530-1989 Low voltage ceramic insulators, pole covered type (T shape), Specification and test method
  • SNI 04-0577-1989 Low voltage ceramic insulators, pole covered type (bell shape), Specification and test method
  • SNI 04-6296.1-2000 Pin insulators for overhead lines. Part 1: Medium voltage 20 kV
  • SNI 04-0683-1989 Low voltage ceramic insulators, Body mass bending and impact strength

RU-GOST R, insulator

  • GOST 4.100-1983 System of quality characteristics of products. Line insulators. Nomenclature of characteristics
  • GOST R 55648-2013 Insulators for contact net of railways. General specifications
  • GOST R 8.623-2006 State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedures of measurements at microwave frequencies
  • GOST IEC 60475-2014 Insulating liquids. Sampling
  • GOST R IEC 60475-2013 Insulating liquids. Sampling
  • GOST R 55189-2012 Line suspension polymeric rod insulators. General specifications
  • GOST 5862-1979 Ceramic insulators and covers for voltage over 1000 V. General specifications

Standard Association of Australia （SAA）, insulator

Danish Standards Foundation, insulator

AENOR, insulator

European Committee for Electrotechnical Standardization（CENELEC）, insulator

  • EN 62223:2009 Insulators - Glossary of terms and definitions
  • EN 60475:2011 Method of sampling insulating liquids
  • EN 61039:2008 Classification of insulating liquids
  • EN 60867:1994 Insulating Liquids - Specifications for Unused Liquids Based on Synthetic Aromatic Hydrocarbons

Aerospace Industries Association, insulator

Institute of Electrical and Electronics Engineers (IEEE), insulator

International Federation of Trucks and Engines, insulator

British Standards Institution (BSI), insulator

  • BS IEC 62899-204:2019 Printed electronics - Materials. Insulator ink. Measurement methods of properties of insulator inks and printed insulating layers
  • BS PD IEC TR 63025:2021 Insulating liquids. Quantitative determination of methanol and ethanol in insulating liquids
  • PD IEC TR 63025:2021 Insulating liquids. Quantitative determination of methanol and ethanol in insulating liquids
  • BS 456:1961 Specification for dimensions of track circuit insulation
  • BS EN IEC 62961:2018 Insulating liquids. Test methods for the determination of interfacial tension of insulating liquids. Determination with the ring method
  • 20/30363286 DC BS EN 60437. Radio interference test on high-voltage insulators
  • 20/30431958 DC BS EN IEC 60437. Radio interference test on high-voltage insulators
  • BS EN 61039:2008 Classification of insulating liquids
  • BS EN 60475:2011 Method of sampling insulating liquids
  • 22/30441859 DC BS EN 61039. Classification of insulating liquids

International Electrotechnical Commission (IEC), insulator

  • IEC TR 63025:2021 Insulating liquids - Quantitative determination of methanol and ethanol in insulating liquids
  • IEC 62899-204:2019 Printed electronics - Part 204: Materials - Insulator ink - Measurement methods of properties of insulator inks and printed insulating layers
  • IEC 62961:2018 Insulating liquids – Test methods for the determination of interfacial tension of insulating liquids - Determination with the ring method
  • IEC 60475:2011 Method of sampling insulating liquids
  • IEC 36/332A/CD:2013 IEC/TS 62073, Ed. 2.0: Guidance on the measurement of hydrophobicity of insulator surfaces
  • IEC 61202-1-1:1994 Fibre optic isolators - Part 1-1: Blank detail specification
  • IEC 60475:2022 CMV Method of sampling insulating liquids
  • IEC 60475:2022 Method of sampling insulating liquids
  • IEC 61039:1990 General classification of insulating liquids
  • IEC 61202-1:2016 Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
  • IEC 61202-1:2009 Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification

American Association, insulator

CH-SNV, insulator

BE-NBN, insulator

RO-ASRO, insulator

  • STAS 1708-1976 DIATOMACEOUS COMPOUNDS FOR THERMAL INSULATIONS
  • STAS 6272-1982 INSULATORS OF CERAMIC MATERIAL FOR OV.CRHEAD LINES General requirements
  • STAS 7622-1966
  • STAS 5851-1980 PORCELAIN INSULATORS WITH PATTY FIXING FOR VOLTAGES UP TO 15 kV INCLUDING Dimensions
  • STAS SR ISO 2017:1982 Vibration and shock - Isolators - Procedure for specifying characteristics
  • STAS 2874-1986 LEAD-IN INSULATORS FOR INDQOR AND OUTDOOR CONNECTION BOXES FROM 1,2 UP TO 42 kV Dimensioiis
  • STAS 8291/4-1972 TYPE N- INSULATOR PINS USED IN OVERHEAD ELECTRIC LINES LP TO 1000 V Dimensions
  • STAS 689-1991 Lead insulators with mechanical fastening for a conductor from 1,2 up to 42 kV. Dimensions
  • STAS 10337-1975 INSULATOR SPINDLES TYPE IS-Ns, USED FOR OVERHEAD ELECTRIC LINES OF 10 kV AND 20 kV

U.S. Military Regulations and Norms, insulator

ZA-SANS, insulator

Professional Standard - Machinery, insulator

  • JB/T 9587-1999 Technical specifications for high alumina ceramic insulators of spark plug
  • JB/T 9588.4-1999 Test method for ceramic insulators of spark plug.Test method for heat insulating resistance
  • JB/T 3083-1993 Specifications for high alumina ceramic materials for spark plug insulators
  • JB/T 9588.2-1999 Test method for ceramic insulators of spark plug.Test method for voltage proof
  • JB/T 9588.3-1999 Test method for ceramic insulators of spark plug.Test method for volume density
  • JB/T 9588.6-1999 Test method for ceramic insulators of spark plug.Test method for pendulum inpact strongth
  • JB/T 7773-1995 Aryl ethane insulating liquid
  • JB/T 9588.1-1999 Test method for ceramic insulators of spark plug.Test method for dimensions and visual examination
  • JB/T 9588.5-1999 Test method for ceramic insulators of spark plug.Test method for thermal shock resistance

Professional Standard - Automobile, insulator

  • QC/T 431-2013 Spark plug ceramic insulator specifications
  • QC/T 431-1999 Specifications for spark plug porcelain insulators
  • QC/T 435-1999 Test method for spark plug porcelain insulator High temperature insulation resistance test method
  • QC/T 433-1999 Spark plug porcelain insulator test method withstand voltage test method
  • QC/T 434-1999 Test methods for spark plug porcelain insulators - Test methods for bulk density
  • QC/T 437-1999 Test methods for spark plug porcelain insulators - Test methods for impact strength
  • QC/T 432-1999 Test methods for spark plug porcelain insulator Appearance and dimensions
  • QC/T 436-1999 Test method for spark plug porcelain insulator

Society of Automotive Engineers (SAE), insulator

PT-IPQ, insulator

(U.S.) Ford Automotive Standards, insulator

SAE - SAE International, insulator

CENELEC - European Committee for Electrotechnical Standardization, insulator

  • EN IEC 62961:2018 Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with the ring method

ES-AENOR, insulator

HU-MSZT, insulator

未注明发布机构, insulator

  • BS 16:1974(1999) Specification for Telegraph material (insulators, pole fittings, etc .)

ES-UNE, insulator

  • UNE-EN IEC 62961:2019 Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with the ring method
  • UNE-EN IEC 60475:2023 Method of sampling insulating liquids

Professional Standard - Building Materials, insulator

  • JC/T 2349-2015 Si<下标3>N<下标4> ceramic insulation components for polycrystalline silicon production

VN-TCVN, insulator

  • TCVN 5169-1993 Procelain through insulators for voltages from 6 to 35 kV.Technical requirements

TH-TISI, insulator

National Electrical Manufacturers Association（NEMA), insulator

  • NEMA C29.11-2020 Composite Suspension Insulators for Overhead Transmission Lines - Tests Replaces ANSI C29.11 [Replaced: ANSI C29.11]
  • NEMA C29.11-1989 Composite Suspension Insulators for Overhead Transmission Lines - Tests Replaces ANSI C29.11 [Replaced: ANSI C29.11]

AT-ON, insulator

  • ONORM E 4101-1976 Electrical overhead lines; Pin insulators type VHD and type VHD-G
  • ONORM E 4106-1981 Electrical overhead lines; Stay wire insulators type A for nominal voltages up to 1000 V

CO-ICONTEC, insulator

UY-UNIT, insulator

国家市场监督管理总局、中国国家标准化管理委员会, insulator

General Motors Corporation (GM), insulator

  • GM 9981596-1994 Adhesive, Waterbased, Rubber, Deadener Pad and Dash Insulator Revision B

American National Standards Institute （ANSI), insulator

Lithuanian Standards Office , insulator

BR-ABNT, insulator

European Committee for Standardization (CEN), insulator

  • prEN 61197-1992 Insulating liquids; test method for the linear flame propagation of insulating liquids using a glass-fibre tape
  • HD 618 S1-1992 General classification of insulating liquids (IEC 1039:1990)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, insulator

  • JEDEC JESD92-2003 Procedure for Characterizing Time- Dependent Dielectric Breakdown of Ultra-Thin Gate Dielectrics

American Society for Testing and Materials (ASTM), insulator

  • ASTM C1290-95 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
  • ASTM C1290-16 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

Japanese Industrial Standards Committee (JISC), insulator

  • JIS C 2162:2010 Test method of long-term reliability of gate insulator for SiC devices at high temperature

American Society of Mechanical Engineers (ASME), insulator

General Motors do Brasil, insulator

  • GMSA EMS.AI.0361-2011 Molded thermal - insulator Isolante t茅rmico moldado Do Not use on New Programs; No Replacement

  insulator, with lead insulator, Lead Insulator, suspension insulator, Insulator, insulator conductor, Elliptical Polarization Measurement Method for Insulator Film Thickness and Refractive Index on Silicon Substrate, Silicon Nitride Insulator, Insulator properties, Insulator Specifications, insulator compound, Insulator phase, metal insulator, Composite Long Rod Insulator, "Insulator, insulator after pin, ceramic insulator.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved