ZH
RU
ES

Parallel range

Parallel range, Total:118 items.

In the international standard classification, Parallel range involves: Gears, Shafts and couplings, Linear and angular measurements, Air quality, Iron and steel products, Semiconductor devices, Cutting tools, Welding, brazing and soldering, Wood, sawlogs and sawn timber, Machine tool systems, Surface treatment and coating, Non-ferrous metals, Screw threads, Applications of information technology, Elements of buildings, Paints and varnishes, Quality, Integrated circuits. Microelectronics, Fasteners for aerospace construction, Pipeline components and pipelines, Ferrous metals, Environmental protection.

CZ-CSN, Parallel range

CSN 01 4431-1987 Methods of mcasuremcnl of parallclism devialoris

RO-ASRO, Parallel range

STAS 7393-1966
STAS 336/1-1988 WOOD Delerminntion of ultimate tensile strcss parallel to grains
STAS 336-1981 WOOD Determination of ultimate lenslle stress parallel to grain

German Institute for Standardization, Parallel range

DIN 158-1:1997-06 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN 52188:1979-05 Testing of wood; determination of ultimate tensile stress parallel to grain
DIN 52188:1979 Testing of wood; determination of ultimate tensile stress parallel to grain
DIN 52187:1979-05 Testing of wood; determination of ultimate shearing stress parallel to grain
DIN EN ISO 5183-2:2002-03 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000); German version EN ISO 5183-2:2002
DIN EN 12373-5:1999 Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998
DIN ISO 21940-12 Bb.1:2015 Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour - Supplement 1: Procedure for balancing at multiple rotational speeds
DIN EN ISO 8430-3:2016-12 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016); German version EN ISO 8430-3:2016
DIN 6885-1:2021 Drive type fastenings without taper action, parallel keys, keyways - Deep pattern - Part 1: Dimensions, tolerances, mass
DIN 6885-3:2021 Drive type fastenings without taper action, parallel keys, keyways - Low pattern - Part 3: Dimensions, tolerances, mass
DIN 6885-3:2021-06 Drive type fastenings without taper action, parallel keys, keyways - Low pattern - Part 3: Dimensions, tolerances, mass
DIN 6885-1:2021-11 Drive type fastenings without taper action, parallel keys, keyways - Deep pattern - Part 1: Dimensions, tolerances, mass
DIN EN ISO 5183-2:2002 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000); German version EN ISO 5183-2:2002
DIN 7167:1987 Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing
DIN 6885-2:2021-06 Drive type fastenings without taper action, parallel keys, keyways - Deep pattern for machine tools - Part 2: Dimensions, tolerances, mass
DIN 6885-2:2021 Drive type fastenings without taper action, parallel keys, keyways - Deep pattern for machine tools - Part 2: Dimensions, tolerances, mass
DIN 264-2:1973-05 Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
DIN ISO 21940-11:2023-04 Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour (ISO 21940-11:2016 + Amd 1:2022)
DIN ISO 21940-11:2023 Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour (ISO 21940-11:2016 + Amd 1:2022)
DIN EN 2884:2020-07 Aerospace series - Screws, pan head, offset cruciform recess, course tolerance, normal shank, short thread, in titanium alloy anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; English version prEN 2884:2020 / Note: ...
DIN EN 4497:2007 Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version
DIN EN ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016); German version EN ISO 8430-3:2016
DIN EN 10226-1:2004-10 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
DIN EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004

Korean Agency for Technology and Standards (KATS), Parallel range

KS B 5223-2001(2016) Screw thread limit gauges for parallel pipe threads
KS B 5223-1985 Screw thread limit gauges for parallel pipe threads
KS B 5223-2001(2021) Screw thread limit gauges for parallel pipe threads
KS B ISO 5183-2:2004 Resistance spot welding－Electrode adaptors, male taper 1：10－Part 2：Parallel shank fixing for end-thrust electrodes
KS B ISO 5183-2:2019 Resistance spot welding — Electrode adaptors, male taper 1：10 —Part 2: Parallel shank fixing for end-thrust electrodes

ESDU - Engineering Sciences Data Unit, Parallel range

ESDU 86006 A-1992 Pitot and static errors in steady level flight.

YU-JUS, Parallel range

JUS M.C2.204-1989 Parallel pins, hardened (dovvel pins), tolerance zone rr>6
JUS D.A1.053-1979 Test ofwood. Determination ofultimate shearing stress parallel
JUS D.A1.048-1979 Testing ofwood. Determination ofultimate tensile stress parallel to grain
JUS M.B0.017-1978 Metric tapered external and mating parallel interna! screw threads. Basic sizes and tolerances

Military Standard of the People's Republic of China-General Armament Department, Parallel range

GJB 9561-2018 Plane optical element surface parallel difference interference detection method Plane fitting method

AT-ON, Parallel range

ONORM M 6771-1995 Deviations of centre distance and parallelism tolerances for axes of cases for cylindrical gears

Taiwan Provincial Standard of the People's Republic of China, Parallel range

CNS 5281-1984 Deviations of Centre Distance and Parallelism Tolerances for Axes of Cases for Cylindrical Gears
CNS 10792-1984 Metric Tapered External Screw Threads with Mating Parallel Internal Screw Threads (Nominal Dimensions and Permissible Deviations)

Association Francaise de Normalisation, Parallel range

NF E10-106:1990 Dimensional measuring methods. Part 7 : parallelisme deviation.
NF E75-320*NF ISO 22917:2016 Precision superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
NF B51-017:1988 Wood. Tensile parallel to grain. Determination of ultimate tensile stress parallel to grain using small clear specimens.
NF E03-164:1986 Pipe threads. Checking of parallel pipe threads with limit gauges. Plain gauges for external and internal screw threads.
NF L24-122*NF EN 4495:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification : 1 100 Mpa (at ambient temperature)/315 oC
NF L24-100*NF EN 4501:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification : 1 100 MPa (at ambient temperature) / 315 oC
NF E03-004-1*NF EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation.
NF T20-082:1976 Produits chimiques à usage industriel - Échantillonnage en vue de la détermination d'un titre moyen dans le cas ou l'écart-type de la dispersion de la grandeur mesurée est inconnu.
NF T20-081:1976 Produits chimiques à usage industriel - Échantillonnage en vue de la détermination d'un titre moyen dans le cas ou l'écart-type de la dispersion de la grandeur mesurée est connu.
NF L24-168:2010 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC.
NF L24-168*NF EN 4178:2017 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC

Japanese Industrial Standards Committee (JISC), Parallel range

JIS B 9915:1989 Measuring methods for dust resistivity (with parallel electrodes)
JIS Z 9004:1983 Single sampling inspection plans having desired operating characteristics by variables (standard deviation unknown and single limit specified)

IT-UNI, Parallel range

UNI 5397-1978 Hot rolled steel finished products. Parallel broad-flanged he beams. Dimensions and tolerances.
UNI 5398-1978 Hot rolled steel finished products. Parallel narrow-flanged IPE beams. Dimensions and tolerances.

TR-TSE, Parallel range

TS 2363-1976 RULES POR MEASUREMET OF HORIZONTAL ANGLES ?N TRIANGULATION NETWORK AND ACCEPTABLE ERROR LIMITS
TS 3459-1980 WOOD — DETERMINATION OF ULTIMATE SHEARING STRESS PARALLEL TO GRAIN

Professional Standard - Electron, Parallel range

SJ 911-1974 Detail specification for silicon planar temperature compensation voltage regulator diodes,Type 2DW230~236

GOSTR, Parallel range

GOST R 58283-2018 Petroleum and natural gas industries. Arctic operations. Account of ice actions in designing the offshore platforms
GOST R 58212-2018 Petroleum and natural gas industries. Arctic operations. Production and processing area of topside of offshore platform
GOST R 58217-2018 Petroleum and natural gas industries. Arctic operations. Evacuation and rescue of offshore platform personnel. General provisions
GOST R 58219-2018 Petroleum and natural gas industries. Arctic operations. Technical devices for fire protection of topsides of offshore platforms. General requirements

British Standards Institution (BSI), Parallel range

BS EN ISO 5183-2:2001 Resistance welding equipment - Electrode adaptors, male taper 1: 10 - Parallel shank fixing for end-thrust electrodes
BS ISO 21940-11:2016+A1:2022 Mechanical vibration. Rotor balancing - Procedures and tolerances for rotors with rigid behaviour
BS ISO 21940-12:2016 Tracked Changes. Mechanical vibration. Rotor balancing. Procedures and tolerances for rotors with flexible behaviour
BS ISO 13061-8:2022 Physical and mechanical properties of wood. Test methods for small clear wood specimens. - Determination of ultimate strength in shearing parallel to grain
BS EN 4497:2006 Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
BS EN 4497:2005 Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
BS EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parallel internal threads. Dimensions, tolerances and designation
BS EN 10226-1:2004(2010) Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parallel internal threads. Dimensions, tolerances and designation

International Organization for Standardization (ISO), Parallel range

ISO 5183-2:2000 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes
ISO 5183-2:1988 Resistance spot welding; electrode adaptors, male taper 1 : 10; part 2: parallel shank fixing for end-thrust electrodes
ISO 3787:1976 Wood; Test methods; Determination of ultimate stress in compression parallel to grain
ISO 8430-3:1988 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust
ISO 8430-3:1988/Cor 1:1990 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust; technical corrigendum 1

Danish Standards Foundation, Parallel range

DS/EN ISO 5183-2:2002 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes
DS/EN 28430-3:1992 Resistance spot welding. Electrode holders. Part 3: Parallel shank fixing for end thrust
DS/ISO 8430-3:1992 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust
DS/EN 10226-1:2005 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation

IN-BIS, Parallel range

IS 12779-1989

ZA-SANS, Parallel range

SANS 5183-2:1994 Resistance spot welding — Electrode adaptors, male taper 1:10Part 2: Parallel shank fixing for end-thrust electrodes
SANS 5183-2:2008 Resistance spot welding - Electrode adaptors, male taper 1:10 Part 2: Parallel shank fixing for end-thrust electrodes

Indonesia Standards, Parallel range

SNI ISO 8905:2012 Sawn timber - Test methods - Determination of ultimate strength in shearing parallel to grain

Professional Standard - Machinery, Parallel range

JB/T 5192.2-1991 Matching dimensions and limit deviation of mechanical riveted parts

KR-KS, Parallel range

KS B ISO 5183-2-2019 Resistance spot welding — Electrode adaptors, male taper 1：10 —Part 2: Parallel shank fixing for end-thrust electrodes

未注明发布机构, Parallel range

DIN EN 10243-2 Berichtigungichtigung 1:2005 Drop forgings – Dimensional tolerances – Part 2: Hot manufactured in horizontal upsetting machines; Steel die forgings – Tolerances on dimensions – Part 2: Upset forging made on horizontal forging machines; Pièces forgées par estampage en acier – Toléranc

Lithuanian Standards Office , Parallel range

LST EN ISO 5183-2:2003 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000)
LST EN 28430-3-2000 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:1988)
LST EN 10226-1-2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation

AENOR, Parallel range

UNE-EN ISO 5183-2:2002 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes. (ISO 5183-2:2000)
UNE-EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.

NL-NEN, Parallel range

NEN 2892-1994 Flatness and parallelism of building elements surfaces. Calculation method for maximum permissible dimensional deviations, measurement and testing

ES-UNE, Parallel range

UNE-EN ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Parallel range

JEDEC JESD8-2-1993 Standard for Operating Voltages and Interface Levels for Low Voltage Emitter-Coupled Logic (ECL) Integrated Circuits

American Society for Testing and Materials (ASTM), Parallel range

ASTM E1486-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486-14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486M-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
ASTM E1486M-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM E1486M-14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria 40;Metric41;
ASTM E1486M-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM E1486M-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]

European Committee for Standardization (CEN), Parallel range

EN ISO 5183-2:2001 Resistance Spot Welding - Electrode Adaptors, Male Taper 1:10 - Part 2: Parallel Shank Fixing for End-Thrust Electrodes ISO 5183-2:2000; Supersedes EN 25183-2:1991
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads; Dimensions, tolerances and designation
EN 4178:2017 Aerospace series - Screws@ pan head@ six lobe recess@ coarse tolerance normal shank@ medium length thread@ in titanium alloy@ anodized@ MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 ��

Standard Association of Australia （SAA）, Parallel range

AS/NZS 1580.601.5:1994 Paints and related materials - Methods of test - Colour - Calculation of small colour differences using the CMC equation

Defense Logistics Agency, Parallel range

DLA SMD-5962-06239 REV A-2007 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, 16-BIT PARALLEL ERROR DETECTION AND CORRECTION CIRCUIT, WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON

European Association of Aerospace Industries, Parallel range

AECMA PREN 3281-1987 Aerospace Series Bearings-Airframe Rolling Rigid, Single Row Ball Bearings in Steel Diameter Series 8 and 9 Dimensions, Torques, Clearances and Loads Issue P 1
AECMA PREN 3282-1987 Aerospace Series Bearings-Airframe Rolling Rigid, Single Row Ball Bearings in Steel, Cadmium Plated Diameter Series 8 and 9 Dimensions, Torques, Clearances and Loads Issue P 1
AECMA PREN 3283-1987 Aerospace Series Bearings-Airframe Rolling Rigid, Single Row Ball Bearings in Corrosion Resisting Steel Diameter Series 8 and 9 Dimensions, Torques, Clearances and Loads Issue P 1
AECMA PREN 3284-1987 Aerospace Series Bearings-Airframe Rolling Rigid, Single Row Ball Bearings in Steel Diameter Series 0 and 2 Normal Clearance Category Dimensions, Torques, and Loads Issue P 1
AECMA PREN 3286-1987 Aerospace Series Bearings-Airframe Rolling Rigid, Single Row Ball Bearings in Corrosion Resisting Steel Diameter Series 0 and 2 Normal Clearance Category Dimensions, Torques, and Loads Issue P 1
AECMA PREN 3289-1987 Aerospace Series Bearings-Airframe Rolling Double Row, Self-Aligning Ball Bearings in Corrosion Resisting Steel Diameter Series 2 Dimensions, Torques, Clearances and Loads Issue P 1
AECMA PREN 3290-1987 Aerospace Series Bearings-Airframe Rolling Single Row, Self-Aligning Roller Bearings in Steel Diameter Series 3 and 4 Dimensions, Torques, Clearances and Loads Issue P 1

Professional Standard - Non-ferrous Metal, Parallel range

YS/T 781.2-2012 The technical requirements of assessment for cleaner production performance in industry of aluminium and aluminium alloy tubes,rods/bars and profiles.Part 2:Products of anodizing and electrophoretic painting